Girish K S | e88d5ae | 2013-02-04 16:15:56 -0800 | [diff] [blame] | 1 | /* |
| 2 | * Samsung's Exynos5250 based Arndale board device tree source |
| 3 | * |
| 4 | * Copyright (c) 2013 Samsung Electronics Co., Ltd. |
| 5 | * http://www.samsung.com |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify |
| 8 | * it under the terms of the GNU General Public License version 2 as |
| 9 | * published by the Free Software Foundation. |
| 10 | */ |
| 11 | |
| 12 | /dts-v1/; |
Padmavathi Venna | 3799279 | 2013-06-18 00:02:08 +0900 | [diff] [blame] | 13 | #include "exynos5250.dtsi" |
Mark Brown | d40f314 | 2013-07-24 10:55:16 +0900 | [diff] [blame] | 14 | #include <dt-bindings/interrupt-controller/irq.h> |
Girish K S | e88d5ae | 2013-02-04 16:15:56 -0800 | [diff] [blame] | 15 | |
| 16 | / { |
| 17 | model = "Insignal Arndale evaluation board based on EXYNOS5250"; |
| 18 | compatible = "insignal,arndale", "samsung,exynos5250"; |
| 19 | |
| 20 | memory { |
| 21 | reg = <0x40000000 0x80000000>; |
| 22 | }; |
| 23 | |
| 24 | chosen { |
| 25 | bootargs = "console=ttySAC2,115200"; |
| 26 | }; |
| 27 | |
Sachin Kamat | d96a400 | 2013-04-04 14:24:59 +0900 | [diff] [blame] | 28 | codec@11000000 { |
| 29 | samsung,mfc-r = <0x43000000 0x800000>; |
| 30 | samsung,mfc-l = <0x51000000 0x800000>; |
| 31 | }; |
| 32 | |
Girish K S | e88d5ae | 2013-02-04 16:15:56 -0800 | [diff] [blame] | 33 | i2c@12C60000 { |
Amit Daniel Kachhap | 1f51819 | 2013-04-04 14:24:51 +0900 | [diff] [blame] | 34 | samsung,i2c-sda-delay = <100>; |
| 35 | samsung,i2c-max-bus-freq = <20000>; |
| 36 | samsung,i2c-slave-addr = <0x66>; |
| 37 | |
| 38 | s5m8767_pmic@66 { |
| 39 | compatible = "samsung,s5m8767-pmic"; |
| 40 | reg = <0x66>; |
Mark Brown | d40f314 | 2013-07-24 10:55:16 +0900 | [diff] [blame] | 41 | interrupt-parent = <&gpx3>; |
| 42 | interrupts = <2 IRQ_TYPE_LEVEL_LOW>; |
Amit Daniel Kachhap | 1f51819 | 2013-04-04 14:24:51 +0900 | [diff] [blame] | 43 | |
Mark Brown | c1f2d53 | 2013-07-24 10:55:16 +0900 | [diff] [blame] | 44 | vinb1-supply = <&main_dc_reg>; |
| 45 | vinb2-supply = <&main_dc_reg>; |
| 46 | vinb3-supply = <&main_dc_reg>; |
| 47 | vinb4-supply = <&main_dc_reg>; |
| 48 | vinb5-supply = <&main_dc_reg>; |
| 49 | vinb6-supply = <&main_dc_reg>; |
| 50 | vinb7-supply = <&main_dc_reg>; |
| 51 | vinb8-supply = <&main_dc_reg>; |
| 52 | vinb9-supply = <&main_dc_reg>; |
| 53 | |
| 54 | vinl1-supply = <&buck7_reg>; |
| 55 | vinl2-supply = <&buck7_reg>; |
| 56 | vinl3-supply = <&buck7_reg>; |
| 57 | vinl4-supply = <&main_dc_reg>; |
| 58 | vinl5-supply = <&main_dc_reg>; |
| 59 | vinl6-supply = <&main_dc_reg>; |
| 60 | vinl7-supply = <&main_dc_reg>; |
| 61 | vinl8-supply = <&buck8_reg>; |
| 62 | vinl9-supply = <&buck8_reg>; |
| 63 | |
Amit Daniel Kachhap | 1f51819 | 2013-04-04 14:24:51 +0900 | [diff] [blame] | 64 | s5m8767,pmic-buck2-dvs-voltage = <1300000>; |
| 65 | s5m8767,pmic-buck3-dvs-voltage = <1100000>; |
| 66 | s5m8767,pmic-buck4-dvs-voltage = <1200000>; |
| 67 | s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 0>, |
| 68 | <&gpd1 1 0>, |
| 69 | <&gpd1 2 0>; |
| 70 | s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, |
| 71 | <&gpx2 4 0>, |
| 72 | <&gpx2 5 0>; |
| 73 | regulators { |
| 74 | ldo1_reg: LDO1 { |
| 75 | regulator-name = "VDD_ALIVE_1.0V"; |
| 76 | regulator-min-microvolt = <1100000>; |
| 77 | regulator-max-microvolt = <1100000>; |
| 78 | regulator-always-on; |
| 79 | regulator-boot-on; |
| 80 | op_mode = <1>; |
| 81 | }; |
| 82 | |
| 83 | ldo2_reg: LDO2 { |
| 84 | regulator-name = "VDD_28IO_DP_1.35V"; |
| 85 | regulator-min-microvolt = <1200000>; |
| 86 | regulator-max-microvolt = <1200000>; |
| 87 | regulator-always-on; |
| 88 | regulator-boot-on; |
| 89 | op_mode = <1>; |
| 90 | }; |
| 91 | |
| 92 | ldo3_reg: LDO3 { |
| 93 | regulator-name = "VDD_COMMON1_1.8V"; |
| 94 | regulator-min-microvolt = <1800000>; |
| 95 | regulator-max-microvolt = <1800000>; |
| 96 | regulator-always-on; |
| 97 | regulator-boot-on; |
| 98 | op_mode = <1>; |
| 99 | }; |
| 100 | |
| 101 | ldo4_reg: LDO4 { |
| 102 | regulator-name = "VDD_IOPERI_1.8V"; |
| 103 | regulator-min-microvolt = <1800000>; |
| 104 | regulator-max-microvolt = <1800000>; |
| 105 | op_mode = <1>; |
| 106 | }; |
| 107 | |
| 108 | ldo5_reg: LDO5 { |
| 109 | regulator-name = "VDD_EXT_1.8V"; |
| 110 | regulator-min-microvolt = <1800000>; |
| 111 | regulator-max-microvolt = <1800000>; |
| 112 | regulator-always-on; |
| 113 | regulator-boot-on; |
| 114 | op_mode = <1>; |
| 115 | }; |
| 116 | |
| 117 | ldo6_reg: LDO6 { |
| 118 | regulator-name = "VDD_MPLL_1.1V"; |
| 119 | regulator-min-microvolt = <1100000>; |
| 120 | regulator-max-microvolt = <1100000>; |
| 121 | regulator-always-on; |
| 122 | regulator-boot-on; |
| 123 | op_mode = <1>; |
| 124 | }; |
| 125 | |
| 126 | ldo7_reg: LDO7 { |
| 127 | regulator-name = "VDD_XPLL_1.1V"; |
| 128 | regulator-min-microvolt = <1100000>; |
| 129 | regulator-max-microvolt = <1100000>; |
| 130 | regulator-always-on; |
| 131 | regulator-boot-on; |
| 132 | op_mode = <1>; |
| 133 | }; |
| 134 | |
| 135 | ldo8_reg: LDO8 { |
| 136 | regulator-name = "VDD_COMMON2_1.0V"; |
| 137 | regulator-min-microvolt = <1000000>; |
| 138 | regulator-max-microvolt = <1000000>; |
| 139 | regulator-always-on; |
| 140 | regulator-boot-on; |
| 141 | op_mode = <1>; |
| 142 | }; |
| 143 | |
| 144 | ldo9_reg: LDO9 { |
| 145 | regulator-name = "VDD_33ON_3.0V"; |
| 146 | regulator-min-microvolt = <3000000>; |
| 147 | regulator-max-microvolt = <3000000>; |
| 148 | op_mode = <1>; |
| 149 | }; |
| 150 | |
| 151 | ldo10_reg: LDO10 { |
| 152 | regulator-name = "VDD_COMMON3_1.8V"; |
| 153 | regulator-min-microvolt = <1800000>; |
| 154 | regulator-max-microvolt = <1800000>; |
| 155 | regulator-always-on; |
| 156 | regulator-boot-on; |
| 157 | op_mode = <1>; |
| 158 | }; |
| 159 | |
| 160 | ldo11_reg: LDO11 { |
| 161 | regulator-name = "VDD_ABB2_1.8V"; |
| 162 | regulator-min-microvolt = <1800000>; |
| 163 | regulator-max-microvolt = <1800000>; |
| 164 | regulator-always-on; |
| 165 | regulator-boot-on; |
| 166 | op_mode = <1>; |
| 167 | }; |
| 168 | |
| 169 | ldo12_reg: LDO12 { |
| 170 | regulator-name = "VDD_USB_3.0V"; |
| 171 | regulator-min-microvolt = <3000000>; |
| 172 | regulator-max-microvolt = <3000000>; |
| 173 | regulator-always-on; |
| 174 | regulator-boot-on; |
| 175 | op_mode = <1>; |
| 176 | }; |
| 177 | |
| 178 | ldo13_reg: LDO13 { |
| 179 | regulator-name = "VDDQ_C2C_W_1.8V"; |
| 180 | regulator-min-microvolt = <1800000>; |
| 181 | regulator-max-microvolt = <1800000>; |
| 182 | regulator-always-on; |
| 183 | regulator-boot-on; |
| 184 | op_mode = <1>; |
| 185 | }; |
| 186 | |
| 187 | ldo14_reg: LDO14 { |
| 188 | regulator-name = "VDD18_ABB0_3_1.8V"; |
| 189 | regulator-min-microvolt = <1800000>; |
| 190 | regulator-max-microvolt = <1800000>; |
| 191 | regulator-always-on; |
| 192 | regulator-boot-on; |
| 193 | op_mode = <1>; |
| 194 | }; |
| 195 | |
| 196 | ldo15_reg: LDO15 { |
| 197 | regulator-name = "VDD10_COMMON4_1.0V"; |
| 198 | regulator-min-microvolt = <1000000>; |
| 199 | regulator-max-microvolt = <1000000>; |
| 200 | regulator-always-on; |
| 201 | regulator-boot-on; |
| 202 | op_mode = <1>; |
| 203 | }; |
| 204 | |
| 205 | ldo16_reg: LDO16 { |
| 206 | regulator-name = "VDD18_HSIC_1.8V"; |
| 207 | regulator-min-microvolt = <1800000>; |
| 208 | regulator-max-microvolt = <1800000>; |
| 209 | regulator-always-on; |
| 210 | regulator-boot-on; |
| 211 | op_mode = <1>; |
| 212 | }; |
| 213 | |
| 214 | ldo17_reg: LDO17 { |
| 215 | regulator-name = "VDDQ_MMC2_3_2.8V"; |
| 216 | regulator-min-microvolt = <2800000>; |
| 217 | regulator-max-microvolt = <2800000>; |
| 218 | regulator-always-on; |
| 219 | regulator-boot-on; |
| 220 | op_mode = <1>; |
| 221 | }; |
| 222 | |
| 223 | ldo18_reg: LDO18 { |
| 224 | regulator-name = "VDD_33ON_2.8V"; |
| 225 | regulator-min-microvolt = <2800000>; |
| 226 | regulator-max-microvolt = <2800000>; |
| 227 | op_mode = <1>; |
| 228 | }; |
| 229 | |
| 230 | ldo22_reg: LDO22 { |
| 231 | regulator-name = "EXT_33_OFF"; |
| 232 | regulator-min-microvolt = <3300000>; |
| 233 | regulator-max-microvolt = <3300000>; |
| 234 | op_mode = <1>; |
| 235 | }; |
| 236 | |
| 237 | ldo23_reg: LDO23 { |
| 238 | regulator-name = "EXT_28_OFF"; |
| 239 | regulator-min-microvolt = <2800000>; |
| 240 | regulator-max-microvolt = <2800000>; |
| 241 | op_mode = <1>; |
| 242 | }; |
| 243 | |
| 244 | ldo25_reg: LDO25 { |
| 245 | regulator-name = "PVDD_LDO25"; |
| 246 | regulator-min-microvolt = <1200000>; |
| 247 | regulator-max-microvolt = <1200000>; |
| 248 | op_mode = <1>; |
| 249 | }; |
| 250 | |
| 251 | ldo26_reg: LDO26 { |
| 252 | regulator-name = "EXT_18_OFF"; |
| 253 | regulator-min-microvolt = <1800000>; |
| 254 | regulator-max-microvolt = <1800000>; |
| 255 | op_mode = <1>; |
| 256 | }; |
| 257 | |
| 258 | buck1_reg: BUCK1 { |
| 259 | regulator-name = "vdd_mif"; |
| 260 | regulator-min-microvolt = <950000>; |
| 261 | regulator-max-microvolt = <1200000>; |
| 262 | regulator-always-on; |
| 263 | regulator-boot-on; |
| 264 | op_mode = <1>; |
| 265 | }; |
| 266 | |
| 267 | buck2_reg: BUCK2 { |
| 268 | regulator-name = "vdd_arm"; |
| 269 | regulator-min-microvolt = <925000>; |
| 270 | regulator-max-microvolt = <1300000>; |
| 271 | regulator-always-on; |
| 272 | regulator-boot-on; |
| 273 | op_mode = <1>; |
| 274 | }; |
| 275 | |
| 276 | buck3_reg: BUCK3 { |
| 277 | regulator-name = "vdd_int"; |
| 278 | regulator-min-microvolt = <900000>; |
| 279 | regulator-max-microvolt = <1200000>; |
| 280 | regulator-always-on; |
| 281 | regulator-boot-on; |
| 282 | op_mode = <1>; |
| 283 | }; |
| 284 | |
| 285 | buck4_reg: BUCK4 { |
| 286 | regulator-name = "vdd_g3d"; |
| 287 | regulator-min-microvolt = <1000000>; |
| 288 | regulator-max-microvolt = <1000000>; |
| 289 | regulator-boot-on; |
| 290 | op_mode = <1>; |
| 291 | }; |
| 292 | |
| 293 | buck5_reg: BUCK5 { |
| 294 | regulator-name = "VDD_MEM_1.35V"; |
| 295 | regulator-min-microvolt = <750000>; |
| 296 | regulator-max-microvolt = <1355000>; |
| 297 | regulator-always-on; |
| 298 | regulator-boot-on; |
| 299 | op_mode = <1>; |
| 300 | }; |
| 301 | |
Mark Brown | c1f2d53 | 2013-07-24 10:55:16 +0900 | [diff] [blame] | 302 | buck7_reg: BUCK7 { |
| 303 | regulator-name = "PVDD_BUCK7"; |
| 304 | regulator-always-on; |
| 305 | }; |
| 306 | |
| 307 | buck8_reg: BUCK8 { |
| 308 | regulator-name = "PVDD_BUCK8"; |
| 309 | regulator-always-on; |
| 310 | }; |
| 311 | |
Amit Daniel Kachhap | 1f51819 | 2013-04-04 14:24:51 +0900 | [diff] [blame] | 312 | buck9_reg: BUCK9 { |
| 313 | regulator-name = "VDD_33_OFF_EXT1"; |
| 314 | regulator-min-microvolt = <750000>; |
| 315 | regulator-max-microvolt = <3000000>; |
| 316 | op_mode = <1>; |
| 317 | }; |
| 318 | }; |
| 319 | }; |
Girish K S | e88d5ae | 2013-02-04 16:15:56 -0800 | [diff] [blame] | 320 | }; |
| 321 | |
| 322 | i2c@12C70000 { |
| 323 | status = "disabled"; |
| 324 | }; |
| 325 | |
| 326 | i2c@12C80000 { |
| 327 | status = "disabled"; |
| 328 | }; |
| 329 | |
| 330 | i2c@12C90000 { |
Mark Brown | 2127484 | 2013-07-24 10:55:16 +0900 | [diff] [blame] | 331 | wm1811a@1a { |
| 332 | compatible = "wlf,wm1811"; |
| 333 | reg = <0x1a>; |
| 334 | |
| 335 | AVDD2-supply = <&main_dc_reg>; |
| 336 | CPVDD-supply = <&main_dc_reg>; |
| 337 | DBVDD1-supply = <&main_dc_reg>; |
| 338 | DBVDD2-supply = <&main_dc_reg>; |
| 339 | DBVDD3-supply = <&main_dc_reg>; |
| 340 | LDO1VDD-supply = <&main_dc_reg>; |
| 341 | SPKVDD1-supply = <&main_dc_reg>; |
| 342 | SPKVDD2-supply = <&main_dc_reg>; |
| 343 | |
| 344 | wlf,ldo1ena = <&gpb0 0 0>; |
| 345 | wlf,ldo2ena = <&gpb0 1 0>; |
| 346 | }; |
Girish K S | e88d5ae | 2013-02-04 16:15:56 -0800 | [diff] [blame] | 347 | }; |
| 348 | |
| 349 | i2c@12CA0000 { |
| 350 | status = "disabled"; |
| 351 | }; |
| 352 | |
| 353 | i2c@12CB0000 { |
| 354 | status = "disabled"; |
| 355 | }; |
| 356 | |
| 357 | i2c@12CC0000 { |
| 358 | status = "disabled"; |
| 359 | }; |
| 360 | |
| 361 | i2c@12CD0000 { |
| 362 | status = "disabled"; |
| 363 | }; |
| 364 | |
| 365 | i2c@121D0000 { |
| 366 | status = "disabled"; |
| 367 | }; |
| 368 | |
| 369 | dwmmc_0: dwmmc0@12200000 { |
| 370 | num-slots = <1>; |
| 371 | supports-highspeed; |
| 372 | broken-cd; |
| 373 | fifo-depth = <0x80>; |
| 374 | card-detect-delay = <200>; |
| 375 | samsung,dw-mshc-ciu-div = <3>; |
| 376 | samsung,dw-mshc-sdr-timing = <2 3>; |
| 377 | samsung,dw-mshc-ddr-timing = <1 2>; |
Sachin Kamat | 2988103 | 2013-04-04 14:24:55 +0900 | [diff] [blame] | 378 | vmmc-supply = <&mmc_reg>; |
Tushar Behera | d01fc36 | 2013-04-04 14:23:51 +0900 | [diff] [blame] | 379 | pinctrl-names = "default"; |
| 380 | pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; |
Girish K S | e88d5ae | 2013-02-04 16:15:56 -0800 | [diff] [blame] | 381 | |
| 382 | slot@0 { |
| 383 | reg = <0>; |
| 384 | bus-width = <8>; |
Girish K S | e88d5ae | 2013-02-04 16:15:56 -0800 | [diff] [blame] | 385 | }; |
| 386 | }; |
| 387 | |
| 388 | dwmmc_1: dwmmc1@12210000 { |
| 389 | status = "disabled"; |
| 390 | }; |
| 391 | |
| 392 | dwmmc_2: dwmmc2@12220000 { |
| 393 | num-slots = <1>; |
| 394 | supports-highspeed; |
| 395 | fifo-depth = <0x80>; |
| 396 | card-detect-delay = <200>; |
| 397 | samsung,dw-mshc-ciu-div = <3>; |
| 398 | samsung,dw-mshc-sdr-timing = <2 3>; |
| 399 | samsung,dw-mshc-ddr-timing = <1 2>; |
Sachin Kamat | 2988103 | 2013-04-04 14:24:55 +0900 | [diff] [blame] | 400 | vmmc-supply = <&mmc_reg>; |
Tushar Behera | d01fc36 | 2013-04-04 14:23:51 +0900 | [diff] [blame] | 401 | pinctrl-names = "default"; |
| 402 | pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; |
Girish K S | e88d5ae | 2013-02-04 16:15:56 -0800 | [diff] [blame] | 403 | |
| 404 | slot@0 { |
| 405 | reg = <0>; |
| 406 | bus-width = <4>; |
Sachin Kamat | 6a44617 | 2013-04-04 14:23:55 +0900 | [diff] [blame] | 407 | disable-wp; |
Girish K S | e88d5ae | 2013-02-04 16:15:56 -0800 | [diff] [blame] | 408 | }; |
| 409 | }; |
| 410 | |
| 411 | dwmmc_3: dwmmc3@12230000 { |
| 412 | status = "disabled"; |
| 413 | }; |
| 414 | |
| 415 | spi_0: spi@12d20000 { |
| 416 | status = "disabled"; |
| 417 | }; |
| 418 | |
| 419 | spi_1: spi@12d30000 { |
| 420 | status = "disabled"; |
| 421 | }; |
| 422 | |
| 423 | spi_2: spi@12d40000 { |
| 424 | status = "disabled"; |
| 425 | }; |
Thomas Abraham | 8b6076d | 2013-03-09 17:19:22 +0900 | [diff] [blame] | 426 | |
Tushar Behera | 89fec22 | 2013-04-04 14:24:47 +0900 | [diff] [blame] | 427 | gpio_keys { |
| 428 | compatible = "gpio-keys"; |
| 429 | |
| 430 | menu { |
| 431 | label = "SW-TACT2"; |
| 432 | gpios = <&gpx1 4 1>; |
| 433 | linux,code = <139>; |
| 434 | gpio-key,wakeup; |
| 435 | }; |
| 436 | |
| 437 | home { |
| 438 | label = "SW-TACT3"; |
| 439 | gpios = <&gpx1 5 1>; |
| 440 | linux,code = <102>; |
| 441 | gpio-key,wakeup; |
| 442 | }; |
| 443 | |
| 444 | up { |
| 445 | label = "SW-TACT4"; |
| 446 | gpios = <&gpx1 6 1>; |
| 447 | linux,code = <103>; |
| 448 | gpio-key,wakeup; |
| 449 | }; |
| 450 | |
| 451 | down { |
| 452 | label = "SW-TACT5"; |
| 453 | gpios = <&gpx1 7 1>; |
| 454 | linux,code = <108>; |
| 455 | gpio-key,wakeup; |
| 456 | }; |
| 457 | |
| 458 | back { |
| 459 | label = "SW-TACT6"; |
| 460 | gpios = <&gpx2 0 1>; |
| 461 | linux,code = <158>; |
| 462 | gpio-key,wakeup; |
| 463 | }; |
| 464 | |
| 465 | wakeup { |
| 466 | label = "SW-TACT7"; |
| 467 | gpios = <&gpx2 1 1>; |
| 468 | linux,code = <143>; |
| 469 | gpio-key,wakeup; |
| 470 | }; |
| 471 | }; |
| 472 | |
Sachin Kamat | 2d2ff61 | 2013-04-04 14:25:06 +0900 | [diff] [blame] | 473 | hdmi { |
| 474 | hpd-gpio = <&gpx3 7 2>; |
| 475 | vdd_osc-supply = <&ldo10_reg>; |
| 476 | vdd_pll-supply = <&ldo8_reg>; |
| 477 | vdd-supply = <&ldo8_reg>; |
| 478 | }; |
| 479 | |
Mark Brown | aa3edb6 | 2013-07-24 10:55:16 +0900 | [diff] [blame] | 480 | regulators { |
| 481 | compatible = "simple-bus"; |
| 482 | #address-cells = <1>; |
| 483 | #size-cells = <0>; |
Sachin Kamat | 2988103 | 2013-04-04 14:24:55 +0900 | [diff] [blame] | 484 | |
Mark Brown | c1f2d53 | 2013-07-24 10:55:16 +0900 | [diff] [blame] | 485 | main_dc_reg: fixedregulator@1 { |
| 486 | compatible = "regulator-fixed"; |
| 487 | regulator-name = "MAIN_DC"; |
| 488 | }; |
| 489 | |
Mark Brown | aa3edb6 | 2013-07-24 10:55:16 +0900 | [diff] [blame] | 490 | mmc_reg: voltage-regulator { |
| 491 | compatible = "regulator-fixed"; |
| 492 | regulator-name = "VDD_33ON_2.8V"; |
| 493 | regulator-min-microvolt = <2800000>; |
| 494 | regulator-max-microvolt = <2800000>; |
| 495 | gpio = <&gpx1 1 1>; |
| 496 | enable-active-high; |
| 497 | }; |
| 498 | |
| 499 | reg_hdmi_en: fixedregulator@0 { |
| 500 | compatible = "regulator-fixed"; |
| 501 | regulator-name = "hdmi-en"; |
| 502 | }; |
Sachin Kamat | 2d2ff61 | 2013-04-04 14:25:06 +0900 | [diff] [blame] | 503 | }; |
| 504 | |
Thomas Abraham | 8b6076d | 2013-03-09 17:19:22 +0900 | [diff] [blame] | 505 | fixed-rate-clocks { |
| 506 | xxti { |
| 507 | compatible = "samsung,clock-xxti"; |
| 508 | clock-frequency = <24000000>; |
| 509 | }; |
| 510 | }; |
Vikas Sajjan | a3093e6 | 2013-06-10 17:04:36 +0900 | [diff] [blame] | 511 | |
Vikas Sajjan | 77899d5 | 2013-08-14 17:15:00 +0900 | [diff] [blame] | 512 | dp-controller@145B0000 { |
Vikas Sajjan | a3093e6 | 2013-06-10 17:04:36 +0900 | [diff] [blame] | 513 | samsung,color-space = <0>; |
| 514 | samsung,dynamic-range = <0>; |
| 515 | samsung,ycbcr-coeff = <0>; |
| 516 | samsung,color-depth = <1>; |
| 517 | samsung,link-rate = <0x0a>; |
| 518 | samsung,lane-count = <4>; |
Vikas Sajjan | 77899d5 | 2013-08-14 17:15:00 +0900 | [diff] [blame] | 519 | status = "okay"; |
Vikas Sajjan | a3093e6 | 2013-06-10 17:04:36 +0900 | [diff] [blame] | 520 | }; |
| 521 | |
Vikas Sajjan | 54db603 | 2013-06-10 17:04:44 +0900 | [diff] [blame] | 522 | fimd: fimd@14400000 { |
Vikas Sajjan | 9ee35a5 | 2013-08-14 17:08:32 +0900 | [diff] [blame] | 523 | status = "okay"; |
Vikas Sajjan | 54db603 | 2013-06-10 17:04:44 +0900 | [diff] [blame] | 524 | display-timings { |
| 525 | native-mode = <&timing0>; |
| 526 | timing0: timing@0 { |
| 527 | /* 2560x1600 DP panel */ |
| 528 | clock-frequency = <50000>; |
| 529 | hactive = <2560>; |
| 530 | vactive = <1600>; |
| 531 | hfront-porch = <48>; |
| 532 | hback-porch = <80>; |
| 533 | hsync-len = <32>; |
| 534 | vback-porch = <16>; |
| 535 | vfront-porch = <8>; |
| 536 | vsync-len = <6>; |
| 537 | }; |
| 538 | }; |
| 539 | }; |
| 540 | |
Mark Brown | 7c1b0ec | 2013-08-19 04:33:22 +0900 | [diff] [blame] | 541 | usb_hub_bus { |
| 542 | compatible = "simple-bus"; |
| 543 | #address-cells = <1>; |
| 544 | #size-cells = <0>; |
| 545 | |
| 546 | // SMSC USB3503 connected in hardware only mode as a PHY |
| 547 | usb_hub: usb_hub { |
| 548 | compatible = "smsc,usb3503a"; |
| 549 | |
| 550 | reset-gpios = <&gpx3 5 1>; |
| 551 | connect-gpios = <&gpd1 7 1>; |
| 552 | }; |
| 553 | }; |
Mark Brown | 15ac869 | 2013-08-19 04:33:28 +0900 | [diff] [blame] | 554 | |
| 555 | usb@12110000 { |
| 556 | usb-phy = <&usb2_phy>; |
| 557 | }; |
Girish K S | e88d5ae | 2013-02-04 16:15:56 -0800 | [diff] [blame] | 558 | }; |