blob: 3010f9971255da6fc0480e9b9b106b1f5246a995 [file] [log] [blame]
Kevin Hilman7c6337e2007-04-30 19:37:19 +01001/*
2 * TI DaVinci serial driver
3 *
4 * Copyright (C) 2006 Texas Instruments.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
19 *
20 */
21
22#include <linux/kernel.h>
23#include <linux/init.h>
24#include <linux/serial_8250.h>
25#include <linux/serial_reg.h>
26#include <linux/platform_device.h>
27#include <linux/delay.h>
28#include <linux/clk.h>
Russell Kingfced80c2008-09-06 12:10:45 +010029#include <linux/io.h>
Kevin Hilman7c6337e2007-04-30 19:37:19 +010030
Kevin Hilman7c6337e2007-04-30 19:37:19 +010031#include <asm/irq.h>
Russell Kinga09e64f2008-08-05 16:14:15 +010032#include <mach/hardware.h>
33#include <mach/serial.h>
34#include <mach/irqs.h>
Kevin Hilman7c6337e2007-04-30 19:37:19 +010035
36#define UART_DAVINCI_PWREMU 0x0c
37
38static inline unsigned int davinci_serial_in(struct plat_serial8250_port *up,
39 int offset)
40{
41 offset <<= up->regshift;
42 return (unsigned int)__raw_readb(up->membase + offset);
43}
44
45static inline void davinci_serial_outp(struct plat_serial8250_port *p,
46 int offset, int value)
47{
48 offset <<= p->regshift;
49 __raw_writeb(value, p->membase + offset);
50}
51
52static struct plat_serial8250_port serial_platform_data[] = {
53 {
54 .membase = (char *)IO_ADDRESS(DAVINCI_UART0_BASE),
55 .mapbase = (unsigned long)DAVINCI_UART0_BASE,
56 .irq = IRQ_UARTINT0,
57 .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
58 .iotype = UPIO_MEM,
59 .regshift = 2,
60 .uartclk = 27000000,
61 },
62 {
63 .flags = 0
64 },
65};
66
67static struct platform_device serial_device = {
68 .name = "serial8250",
69 .id = PLAT8250_DEV_PLATFORM,
70 .dev = {
71 .platform_data = serial_platform_data,
72 },
73};
74
75static void __init davinci_serial_reset(struct plat_serial8250_port *p)
76{
77 /* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */
78 unsigned int pwremu = 0;
79
80 davinci_serial_outp(p, UART_IER, 0); /* disable all interrupts */
81
82 davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu);
83 mdelay(10);
84
85 pwremu |= (0x3 << 13);
86 pwremu |= 0x1;
87 davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu);
88}
89
90static int __init davinci_init(void)
91{
92 davinci_serial_reset(&serial_platform_data[0]);
93 return platform_device_register(&serial_device);
94}
95
96arch_initcall(davinci_init);