blob: 3f7e60995c80714888df391cd8b91ef0f5982306 [file] [log] [blame]
Roman Zippel80daa562008-01-14 04:51:16 +01001config ARCH
2 string
3 option env="ARCH"
4
5config KERNELVERSION
6 string
7 option env="KERNELVERSION"
8
Roman Zippelface4372006-06-08 22:12:45 -07009config DEFCONFIG_LIST
10 string
Paolo 'Blaisorblade' Giarrussob2670eac2006-10-19 23:28:23 -070011 depends on !UML
Roman Zippelface4372006-06-08 22:12:45 -070012 option defconfig_list
13 default "/lib/modules/$UNAME_RELEASE/.config"
14 default "/etc/kernel-config"
15 default "/boot/config-$UNAME_RELEASE"
Sam Ravnborg73531902008-05-25 23:03:18 +020016 default "$ARCH_DEFCONFIG"
Roman Zippelface4372006-06-08 22:12:45 -070017 default "arch/$ARCH/defconfig"
18
Peter Oberparleiterb99b87f2009-06-17 16:28:03 -070019config CONSTRUCTORS
20 bool
21 depends on !UML
22 default y
23
Al Boldiff0cfc62007-07-31 00:39:23 -070024menu "General setup"
Linus Torvalds1da177e2005-04-16 15:20:36 -070025
26config EXPERIMENTAL
27 bool "Prompt for development and/or incomplete code/drivers"
28 ---help---
29 Some of the various things that Linux supports (such as network
30 drivers, file systems, network protocols, etc.) can be in a state
31 of development where the functionality, stability, or the level of
32 testing is not yet high enough for general use. This is usually
33 known as the "alpha-test" phase among developers. If a feature is
34 currently in alpha-test, then the developers usually discourage
35 uninformed widespread use of this feature by the general public to
36 avoid "Why doesn't this work?" type mail messages. However, active
37 testing and use of these systems is welcomed. Just be aware that it
38 may not meet the normal level of reliability or it may fail to work
39 in some special cases. Detailed bug reports from people familiar
40 with the kernel internals are usually welcomed by the developers
41 (before submitting bug reports, please read the documents
42 <file:README>, <file:MAINTAINERS>, <file:REPORTING-BUGS>,
43 <file:Documentation/BUG-HUNTING>, and
44 <file:Documentation/oops-tracing.txt> in the kernel source).
45
46 This option will also make obsoleted drivers available. These are
47 drivers that have been replaced by something else, and/or are
48 scheduled to be removed in a future kernel release.
49
50 Unless you intend to help test and develop a feature or driver that
51 falls into this category, or you have a situation that requires
52 using these features, you should probably say N here, which will
53 cause the configurator to present you with fewer choices. If
54 you say Y here, you will be offered the choice of using features or
55 drivers that are currently considered to be in the alpha-test phase.
56
Linus Torvalds1da177e2005-04-16 15:20:36 -070057config BROKEN
58 bool
Linus Torvalds1da177e2005-04-16 15:20:36 -070059
60config BROKEN_ON_SMP
61 bool
62 depends on BROKEN || !SMP
63 default y
64
65config LOCK_KERNEL
66 bool
67 depends on SMP || PREEMPT
68 default y
69
70config INIT_ENV_ARG_LIMIT
71 int
Adrian Bunkdd673bc2006-06-30 01:55:51 -070072 default 32 if !UML
73 default 128 if UML
Linus Torvalds1da177e2005-04-16 15:20:36 -070074 help
Randy Dunlap34ad92c2005-10-30 15:01:46 -080075 Maximum of each of the number of arguments and environment
76 variables passed to init from the kernel command line.
Linus Torvalds1da177e2005-04-16 15:20:36 -070077
Linus Torvalds1da177e2005-04-16 15:20:36 -070078
79config LOCALVERSION
80 string "Local version - append to kernel release"
81 help
82 Append an extra string to the end of your kernel version.
83 This will show up when you type uname, for example.
84 The string you set here will be appended after the contents of
85 any files with a filename matching localversion* in your
86 object and source tree, in that order. Your total string can
87 be a maximum of 64 characters.
88
Ryan Andersonaaebf432005-07-31 04:57:49 -040089config LOCALVERSION_AUTO
90 bool "Automatically append version information to the version string"
91 default y
92 help
93 This will try to automatically determine if the current tree is a
Robert P. J. Day6e5a5422007-05-01 23:08:11 +020094 release tree by looking for git tags that belong to the current
95 top of tree revision.
Ryan Andersonaaebf432005-07-31 04:57:49 -040096
97 A string of the format -gxxxxxxxx will be added to the localversion
Robert P. J. Day6e5a5422007-05-01 23:08:11 +020098 if a git-based tree is found. The string generated by this will be
Ryan Andersonaaebf432005-07-31 04:57:49 -040099 appended after any matching localversion* files, and after the value
Robert P. J. Day6e5a5422007-05-01 23:08:11 +0200100 set in CONFIG_LOCALVERSION.
Ryan Andersonaaebf432005-07-31 04:57:49 -0400101
Robert P. J. Day6e5a5422007-05-01 23:08:11 +0200102 (The actual string used here is the first eight characters produced
103 by running the command:
104
105 $ git rev-parse --verify HEAD
106
107 which is done within the script "scripts/setlocalversion".)
Ryan Andersonaaebf432005-07-31 04:57:49 -0400108
H. Peter Anvin2e9f3bd2009-01-04 15:41:25 -0800109config HAVE_KERNEL_GZIP
110 bool
111
112config HAVE_KERNEL_BZIP2
113 bool
114
115config HAVE_KERNEL_LZMA
116 bool
117
Alain Knaff30d65db2009-01-04 22:46:17 +0100118choice
H. Peter Anvin2e9f3bd2009-01-04 15:41:25 -0800119 prompt "Kernel compression mode"
120 default KERNEL_GZIP
121 depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA
122 help
Alain Knaff30d65db2009-01-04 22:46:17 +0100123 The linux kernel is a kind of self-extracting executable.
124 Several compression algorithms are available, which differ
125 in efficiency, compression and decompression speed.
126 Compression speed is only relevant when building a kernel.
127 Decompression speed is relevant at each boot.
128
129 If you have any problems with bzip2 or lzma compressed
130 kernels, mail me (Alain Knaff) <alain@knaff.lu>. (An older
131 version of this functionality (bzip2 only), for 2.4, was
132 supplied by Christian Ludwig)
133
134 High compression options are mostly useful for users, who
135 are low on disk space (embedded systems), but for whom ram
136 size matters less.
137
138 If in doubt, select 'gzip'
139
140config KERNEL_GZIP
H. Peter Anvin2e9f3bd2009-01-04 15:41:25 -0800141 bool "Gzip"
142 depends on HAVE_KERNEL_GZIP
143 help
144 The old and tried gzip compression. Its compression ratio is
145 the poorest among the 3 choices; however its speed (both
146 compression and decompression) is the fastest.
Alain Knaff30d65db2009-01-04 22:46:17 +0100147
148config KERNEL_BZIP2
149 bool "Bzip2"
H. Peter Anvin2e9f3bd2009-01-04 15:41:25 -0800150 depends on HAVE_KERNEL_BZIP2
Alain Knaff30d65db2009-01-04 22:46:17 +0100151 help
152 Its compression ratio and speed is intermediate.
H. Peter Anvin2e9f3bd2009-01-04 15:41:25 -0800153 Decompression speed is slowest among the three. The kernel
154 size is about 10% smaller with bzip2, in comparison to gzip.
155 Bzip2 uses a large amount of memory. For modern kernels you
156 will need at least 8MB RAM or more for booting.
Alain Knaff30d65db2009-01-04 22:46:17 +0100157
158config KERNEL_LZMA
H. Peter Anvin2e9f3bd2009-01-04 15:41:25 -0800159 bool "LZMA"
160 depends on HAVE_KERNEL_LZMA
161 help
162 The most recent compression algorithm.
163 Its ratio is best, decompression speed is between the other
164 two. Compression is slowest. The kernel size is about 33%
165 smaller with LZMA in comparison to gzip.
Alain Knaff30d65db2009-01-04 22:46:17 +0100166
167endchoice
168
Linus Torvalds1da177e2005-04-16 15:20:36 -0700169config SWAP
170 bool "Support for paging of anonymous memory (swap)"
David Howells93614012006-09-30 20:45:40 +0200171 depends on MMU && BLOCK
Linus Torvalds1da177e2005-04-16 15:20:36 -0700172 default y
173 help
174 This option allows you to choose whether you want to have support
Jesper Juhl92c35042006-01-15 02:40:08 +0100175 for so called swap devices or swap files in your kernel that are
Linus Torvalds1da177e2005-04-16 15:20:36 -0700176 used to provide more virtual memory than the actual RAM present
177 in your computer. If unsure say Y.
178
179config SYSVIPC
180 bool "System V IPC"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700181 ---help---
182 Inter Process Communication is a suite of library functions and
183 system calls which let processes (running programs) synchronize and
184 exchange information. It is generally considered to be a good thing,
185 and some programs won't run unless you say Y here. In particular, if
186 you want to run the DOS emulator dosemu under Linux (read the
187 DOSEMU-HOWTO, available from <http://www.tldp.org/docs.html#howto>),
188 you'll need to say Y here.
189
190 You can find documentation about IPC with "info ipc" and also in
191 section 6.4 of the Linux Programmer's Guide, available from
192 <http://www.tldp.org/guides.html>.
193
Eric W. Biedermana5494dc2007-02-14 00:34:06 -0800194config SYSVIPC_SYSCTL
195 bool
196 depends on SYSVIPC
197 depends on SYSCTL
198 default y
199
Linus Torvalds1da177e2005-04-16 15:20:36 -0700200config POSIX_MQUEUE
201 bool "POSIX Message Queues"
202 depends on NET && EXPERIMENTAL
203 ---help---
204 POSIX variant of message queues is a part of IPC. In POSIX message
205 queues every message has a priority which decides about succession
206 of receiving it by a process. If you want to compile and run
207 programs written e.g. for Solaris with use of its POSIX message
Robert P. J. Dayb0e37652007-05-09 07:25:13 +0200208 queues (functions mq_*) say Y here.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700209
210 POSIX message queues are visible as a filesystem called 'mqueue'
211 and can be mounted somewhere if you want to do filesystem
212 operations on message queues.
213
214 If unsure, say Y.
215
Serge E. Hallynbdc8e5f2009-04-06 19:01:11 -0700216config POSIX_MQUEUE_SYSCTL
217 bool
218 depends on POSIX_MQUEUE
219 depends on SYSCTL
220 default y
221
Linus Torvalds1da177e2005-04-16 15:20:36 -0700222config BSD_PROCESS_ACCT
223 bool "BSD Process Accounting"
224 help
225 If you say Y here, a user level program will be able to instruct the
226 kernel (via a special system call) to write process accounting
227 information to a file: whenever a process exits, information about
228 that process will be appended to the file by the kernel. The
229 information includes things such as creation time, owning user,
230 command name, memory usage, controlling terminal etc. (the complete
231 list is in the struct acct in <file:include/linux/acct.h>). It is
232 up to the user level program to do useful things with this
233 information. This is generally a good idea, so say Y.
234
235config BSD_PROCESS_ACCT_V3
236 bool "BSD Process Accounting version 3 file format"
237 depends on BSD_PROCESS_ACCT
238 default n
239 help
240 If you say Y here, the process accounting information is written
241 in a new file format that also logs the process IDs of each
242 process and it's parent. Note that this file format is incompatible
243 with previous v0/v1/v2 file formats, so you will need updated tools
244 for processing it. A preliminary version of these tools is available
S.Çağlar Onur37a4c942008-06-18 11:45:13 +0300245 at <http://www.gnu.org/software/acct/>.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700246
Shailabh Nagarc7572492006-07-14 00:24:40 -0700247config TASKSTATS
248 bool "Export task/process statistics through netlink (EXPERIMENTAL)"
249 depends on NET
250 default n
251 help
252 Export selected statistics for tasks/processes through the
253 generic netlink interface. Unlike BSD process accounting, the
254 statistics are available during the lifetime of tasks/processes as
255 responses to commands. Like BSD accounting, they are sent to user
256 space on task exit.
257
258 Say N if unsure.
259
Shailabh Nagarca74e922006-07-14 00:24:36 -0700260config TASK_DELAY_ACCT
261 bool "Enable per-task delay accounting (EXPERIMENTAL)"
Shailabh Nagar6f449932006-07-14 00:24:41 -0700262 depends on TASKSTATS
Shailabh Nagarca74e922006-07-14 00:24:36 -0700263 help
264 Collect information on time spent by a task waiting for system
265 resources like cpu, synchronous block I/O completion and swapping
266 in pages. Such statistics can help in setting a task's priorities
267 relative to other tasks for cpu, io, rss limits etc.
268
269 Say N if unsure.
270
Alexey Dobriyan18f705f2007-02-10 01:46:44 -0800271config TASK_XACCT
272 bool "Enable extended accounting over taskstats (EXPERIMENTAL)"
273 depends on TASKSTATS
274 help
275 Collect extended task accounting data and send the data
276 to userland for processing over the taskstats interface.
277
278 Say N if unsure.
279
280config TASK_IO_ACCOUNTING
281 bool "Enable per-task storage I/O accounting (EXPERIMENTAL)"
282 depends on TASK_XACCT
283 help
284 Collect information on the number of bytes of storage I/O which this
285 task has caused.
286
287 Say N if unsure.
288
Linus Torvalds1da177e2005-04-16 15:20:36 -0700289config AUDIT
290 bool "Auditing support"
Chris Wright804a6a492005-05-11 10:52:45 +0100291 depends on NET
Linus Torvalds1da177e2005-04-16 15:20:36 -0700292 help
293 Enable auditing infrastructure that can be used with another
294 kernel subsystem, such as SELinux (which requires this for
295 logging of avc messages output). Does not do system-call
296 auditing without CONFIG_AUDITSYSCALL.
297
298config AUDITSYSCALL
299 bool "Enable system-call auditing support"
Yuichi Nakamura1322b9d2007-11-10 19:21:34 +0900300 depends on AUDIT && (X86 || PPC || PPC64 || S390 || IA64 || UML || SPARC64|| SUPERH)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700301 default y if SECURITY_SELINUX
302 help
303 Enable low-overhead system-call auditing infrastructure that
304 can be used independently or with another kernel subsystem,
Amy Griffisf368c07d2006-04-07 16:55:56 -0400305 such as SELinux. To use audit's filesystem watch feature, please
306 ensure that INOTIFY is configured.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700307
Al Viro74c3cbe2007-07-22 08:04:18 -0400308config AUDIT_TREE
309 def_bool y
Eric Paris63c882a2009-05-21 17:02:01 -0400310 depends on AUDITSYSCALL
311 select INOTIFY
Al Viro74c3cbe2007-07-22 08:04:18 -0400312
Mike Travisc903ff82009-01-15 12:28:29 -0800313menu "RCU Subsystem"
314
315choice
316 prompt "RCU Implementation"
Paul E. McKenney31c9a242009-04-02 21:06:25 -0700317 default TREE_RCU
Mike Travisc903ff82009-01-15 12:28:29 -0800318
319config CLASSIC_RCU
320 bool "Classic RCU"
321 help
322 This option selects the classic RCU implementation that is
323 designed for best read-side performance on non-realtime
324 systems.
325
326 Select this option if you are unsure.
327
328config TREE_RCU
329 bool "Tree-based hierarchical RCU"
330 help
331 This option selects the RCU implementation that is
332 designed for very large SMP system with hundreds or
333 thousands of CPUs.
334
335config PREEMPT_RCU
336 bool "Preemptible RCU"
337 depends on PREEMPT
338 help
339 This option reduces the latency of the kernel by making certain
340 RCU sections preemptible. Normally RCU code is non-preemptible, if
341 this option is selected then read-only RCU sections become
342 preemptible. This helps latency, but may expose bugs due to
343 now-naive assumptions about each RCU read-side critical section
344 remaining on a given CPU through its execution.
345
346endchoice
347
348config RCU_TRACE
349 bool "Enable tracing for RCU"
350 depends on TREE_RCU || PREEMPT_RCU
351 help
352 This option provides tracing in RCU which presents stats
353 in debugfs for debugging RCU implementation.
354
355 Say Y here if you want to enable RCU tracing
356 Say N if you are unsure.
357
358config RCU_FANOUT
359 int "Tree-based hierarchical RCU fanout value"
360 range 2 64 if 64BIT
361 range 2 32 if !64BIT
362 depends on TREE_RCU
363 default 64 if 64BIT
364 default 32 if !64BIT
365 help
366 This option controls the fanout of hierarchical implementations
367 of RCU, allowing RCU to work efficiently on machines with
368 large numbers of CPUs. This value must be at least the cube
369 root of NR_CPUS, which allows NR_CPUS up to 32,768 for 32-bit
370 systems and up to 262,144 for 64-bit systems.
371
372 Select a specific number if testing RCU itself.
373 Take the default if unsure.
374
375config RCU_FANOUT_EXACT
376 bool "Disable tree-based hierarchical RCU auto-balancing"
377 depends on TREE_RCU
378 default n
379 help
380 This option forces use of the exact RCU_FANOUT value specified,
381 regardless of imbalances in the hierarchy. This is useful for
382 testing RCU itself, and might one day be useful on systems with
383 strong NUMA behavior.
384
385 Without RCU_FANOUT_EXACT, the code will balance the hierarchy.
386
387 Say N if unsure.
388
389config TREE_RCU_TRACE
390 def_bool RCU_TRACE && TREE_RCU
391 select DEBUG_FS
392 help
393 This option provides tracing for the TREE_RCU implementation,
394 permitting Makefile to trivially select kernel/rcutree_trace.c.
395
396config PREEMPT_RCU_TRACE
397 def_bool RCU_TRACE && PREEMPT_RCU
398 select DEBUG_FS
399 help
400 This option provides tracing for the PREEMPT_RCU implementation,
401 permitting Makefile to trivially select kernel/rcupreempt_trace.c.
402
403endmenu # "RCU Subsystem"
404
Linus Torvalds1da177e2005-04-16 15:20:36 -0700405config IKCONFIG
Ross Birof2443ab2006-09-30 23:27:25 -0700406 tristate "Kernel .config support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700407 ---help---
408 This option enables the complete Linux kernel ".config" file
409 contents to be saved in the kernel. It provides documentation
410 of which kernel options are used in a running kernel or in an
411 on-disk kernel. This information can be extracted from the kernel
412 image file with the script scripts/extract-ikconfig and used as
413 input to rebuild the current kernel or to build another kernel.
414 It can also be extracted from a running kernel by reading
415 /proc/config.gz if enabled (below).
416
417config IKCONFIG_PROC
418 bool "Enable access to .config through /proc/config.gz"
419 depends on IKCONFIG && PROC_FS
420 ---help---
421 This option enables access to the kernel configuration file
422 through /proc/config.gz.
423
Alistair John Strachan794543a2007-05-08 00:31:15 -0700424config LOG_BUF_SHIFT
425 int "Kernel log buffer size (16 => 64KB, 17 => 128KB)"
426 range 12 21
Adrian Bunkf17a32e2008-04-29 00:58:58 -0700427 default 17
Alistair John Strachan794543a2007-05-08 00:31:15 -0700428 help
429 Select kernel log buffer size as a power of 2.
Adrian Bunkf17a32e2008-04-29 00:58:58 -0700430 Examples:
431 17 => 128 KB
432 16 => 64 KB
433 15 => 32 KB
434 14 => 16 KB
Alistair John Strachan794543a2007-05-08 00:31:15 -0700435 13 => 8 KB
436 12 => 4 KB
437
KAMEZAWA Hiroyuki5cdc38f2009-01-07 18:07:30 -0800438#
439# Architectures with an unreliable sched_clock() should select this:
440#
441config HAVE_UNSTABLE_SCHED_CLOCK
442 bool
443
444config GROUP_SCHED
445 bool "Group CPU scheduler"
446 depends on EXPERIMENTAL
447 default n
448 help
449 This feature lets CPU scheduler recognize task groups and control CPU
450 bandwidth allocation to such task groups.
451 In order to create a group from arbitrary set of processes, use
452 CONFIG_CGROUPS. (See Control Group support.)
453
454config FAIR_GROUP_SCHED
455 bool "Group scheduling for SCHED_OTHER"
456 depends on GROUP_SCHED
457 default GROUP_SCHED
458
459config RT_GROUP_SCHED
460 bool "Group scheduling for SCHED_RR/FIFO"
461 depends on EXPERIMENTAL
462 depends on GROUP_SCHED
463 default n
464 help
465 This feature lets you explicitly allocate real CPU bandwidth
466 to users or control groups (depending on the "Basis for grouping tasks"
467 setting below. If enabled, it will also make it impossible to
468 schedule realtime tasks for non-root users until you allocate
469 realtime bandwidth for them.
470 See Documentation/scheduler/sched-rt-group.txt for more information.
471
472choice
473 depends on GROUP_SCHED
474 prompt "Basis for grouping tasks"
475 default USER_SCHED
476
477config USER_SCHED
478 bool "user id"
479 help
480 This option will choose userid as the basis for grouping
481 tasks, thus providing equal CPU bandwidth to each user.
482
483config CGROUP_SCHED
484 bool "Control groups"
485 depends on CGROUPS
486 help
487 This option allows you to create arbitrary task groups
488 using the "cgroup" pseudo filesystem and control
489 the cpu bandwidth allocated to each such task group.
Li Zefan45ce80f2009-01-15 13:50:59 -0800490 Refer to Documentation/cgroups/cgroups.txt for more
491 information on "cgroup" pseudo filesystem.
KAMEZAWA Hiroyuki5cdc38f2009-01-07 18:07:30 -0800492
493endchoice
494
Li Zefan23964d22009-01-15 13:50:58 -0800495menuconfig CGROUPS
496 boolean "Control Group support"
Paul Menageddbcc7e2007-10-18 23:39:30 -0700497 help
Li Zefan23964d22009-01-15 13:50:58 -0800498 This option adds support for grouping sets of processes together, for
KAMEZAWA Hiroyuki5cdc38f2009-01-07 18:07:30 -0800499 use with process control subsystems such as Cpusets, CFS, memory
500 controls or device isolation.
501 See
KAMEZAWA Hiroyuki5cdc38f2009-01-07 18:07:30 -0800502 - Documentation/scheduler/sched-design-CFS.txt (CFS)
Li Zefan45ce80f2009-01-15 13:50:59 -0800503 - Documentation/cgroups/ (features for grouping, isolation
504 and resource control)
Paul Menageddbcc7e2007-10-18 23:39:30 -0700505
506 Say N if unsure.
507
Li Zefan23964d22009-01-15 13:50:58 -0800508if CGROUPS
509
Paul Menage006cb992007-10-18 23:39:43 -0700510config CGROUP_DEBUG
511 bool "Example debug cgroup subsystem"
512 depends on CGROUPS
Paul Menage418d7d82008-04-29 01:00:05 -0700513 default n
Paul Menage006cb992007-10-18 23:39:43 -0700514 help
515 This option enables a simple cgroup subsystem that
516 exports useful debugging information about the cgroups
Li Zefan23964d22009-01-15 13:50:58 -0800517 framework.
Paul Menage006cb992007-10-18 23:39:43 -0700518
Li Zefan23964d22009-01-15 13:50:58 -0800519 Say N if unsure.
Paul Menage006cb992007-10-18 23:39:43 -0700520
Serge E. Hallyn858d72e2007-10-18 23:39:45 -0700521config CGROUP_NS
Li Zefan23964d22009-01-15 13:50:58 -0800522 bool "Namespace cgroup subsystem"
523 depends on CGROUPS
524 help
525 Provides a simple namespace cgroup subsystem to
526 provide hierarchical naming of sets of namespaces,
527 for instance virtual servers and checkpoint/restart
528 jobs.
Serge E. Hallyn858d72e2007-10-18 23:39:45 -0700529
Matt Helsleydc52ddc2008-10-18 20:27:21 -0700530config CGROUP_FREEZER
Li Zefan23964d22009-01-15 13:50:58 -0800531 bool "Freezer cgroup subsystem"
532 depends on CGROUPS
533 help
534 Provides a way to freeze and unfreeze all tasks in a
Matt Helsleydc52ddc2008-10-18 20:27:21 -0700535 cgroup.
536
Serge E. Hallyn08ce5f12008-04-29 01:00:10 -0700537config CGROUP_DEVICE
538 bool "Device controller for cgroups"
539 depends on CGROUPS && EXPERIMENTAL
540 help
541 Provides a cgroup implementing whitelists for devices which
542 a process in the cgroup can mknod or open.
543
Linus Torvalds1da177e2005-04-16 15:20:36 -0700544config CPUSETS
545 bool "Cpuset support"
Paul Menagedb7f47c2009-04-02 16:57:55 -0700546 depends on CGROUPS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700547 help
Randy Dunlapd9fd8a62005-07-27 11:45:11 -0700548 This option will let you create and manage CPUSETs which
Linus Torvalds1da177e2005-04-16 15:20:36 -0700549 allow dynamically partitioning a system into sets of CPUs and
550 Memory Nodes and assigning tasks to run only within those sets.
551 This is primarily useful on large SMP or NUMA systems.
552
553 Say N if unsure.
554
Li Zefan23964d22009-01-15 13:50:58 -0800555config PROC_PID_CPUSET
556 bool "Include legacy /proc/<pid>/cpuset file"
557 depends on CPUSETS
558 default y
559
Srivatsa Vaddagirid842de82007-12-02 20:04:49 +0100560config CGROUP_CPUACCT
561 bool "Simple CPU accounting cgroup subsystem"
562 depends on CGROUPS
563 help
564 Provides a simple Resource Controller for monitoring the
Li Zefan23964d22009-01-15 13:50:58 -0800565 total CPU consumed by the tasks in a cgroup.
Srivatsa Vaddagirid842de82007-12-02 20:04:49 +0100566
Pavel Emelianove552b662008-02-07 00:13:49 -0800567config RESOURCE_COUNTERS
568 bool "Resource counters"
569 help
570 This option enables controller independent resource accounting
Li Zefan23964d22009-01-15 13:50:58 -0800571 infrastructure that works with cgroups.
Pavel Emelianove552b662008-02-07 00:13:49 -0800572 depends on CGROUPS
573
Balbir Singh00f0b822008-03-04 14:28:39 -0800574config CGROUP_MEM_RES_CTLR
575 bool "Memory Resource Controller for Control Groups"
576 depends on CGROUPS && RESOURCE_COUNTERS
Balbir Singhcf475ad2008-04-29 01:00:16 -0700577 select MM_OWNER
Balbir Singh00f0b822008-03-04 14:28:39 -0800578 help
KAMEZAWA Hiroyuki84ad6d72008-10-29 14:01:06 -0700579 Provides a memory resource controller that manages both anonymous
Thadeu Lima de Souza Cascardo21acb9c2009-02-04 10:12:08 +0100580 memory and page cache. (See Documentation/cgroups/memory.txt)
Balbir Singh00f0b822008-03-04 14:28:39 -0800581
582 Note that setting this option increases fixed memory overhead
KAMEZAWA Hiroyuki84ad6d72008-10-29 14:01:06 -0700583 associated with each page of memory in the system. By this,
584 20(40)bytes/PAGE_SIZE on 32(64)bit system will be occupied by memory
585 usage tracking struct at boot. Total amount of this is printed out
586 at boot.
Balbir Singh00f0b822008-03-04 14:28:39 -0800587
588 Only enable when you're ok with these trade offs and really
KAMEZAWA Hiroyuki84ad6d72008-10-29 14:01:06 -0700589 sure you need the memory resource controller. Even when you enable
590 this, you can set "cgroup_disable=memory" at your boot option to
591 disable memory resource controller and you can avoid overheads.
Li Zefanc9d54092009-01-07 18:07:35 -0800592 (and lose benefits of memory resource controller)
Balbir Singh00f0b822008-03-04 14:28:39 -0800593
Balbir Singhcf475ad2008-04-29 01:00:16 -0700594 This config option also selects MM_OWNER config option, which
595 could in turn add some fork/exit overhead.
596
KAMEZAWA Hiroyukic0777192009-01-07 18:07:57 -0800597config CGROUP_MEM_RES_CTLR_SWAP
598 bool "Memory Resource Controller Swap Extension(EXPERIMENTAL)"
599 depends on CGROUP_MEM_RES_CTLR && SWAP && EXPERIMENTAL
600 help
601 Add swap management feature to memory resource controller. When you
602 enable this, you can limit mem+swap usage per cgroup. In other words,
603 when you disable this, memory resource controller has no cares to
604 usage of swap...a process can exhaust all of the swap. This extension
605 is useful when you want to avoid exhaustion swap but this itself
606 adds more overheads and consumes memory for remembering information.
607 Especially if you use 32bit system or small memory system, please
608 be careful about enabling this. When memory resource controller
609 is disabled by boot option, this will be automatically disabled and
610 there will be no overhead from this. Even when you set this config=y,
611 if boot option "noswapaccount" is set, swap will not be accounted.
KAMEZAWA Hiroyuki627991a2009-04-02 16:57:47 -0700612 Now, memory usage of swap_cgroup is 2 bytes per entry. If swap page
613 size is 4096bytes, 512k per 1Gbytes of swap.
KAMEZAWA Hiroyukic0777192009-01-07 18:07:57 -0800614
Li Zefan23964d22009-01-15 13:50:58 -0800615endif # CGROUPS
KAMEZAWA Hiroyukic0777192009-01-07 18:07:57 -0800616
Li Zefan23964d22009-01-15 13:50:58 -0800617config MM_OWNER
618 bool
KAMEZAWA Hiroyuki5cdc38f2009-01-07 18:07:30 -0800619
Kay Sievers88a22c92006-09-14 11:23:28 +0200620config SYSFS_DEPRECATED
Ingo Molnard47846c2008-03-04 14:54:47 +0100621 bool
622
623config SYSFS_DEPRECATED_V2
Kay Sieversf6ee6492009-04-16 19:56:37 +0200624 bool "remove sysfs features which may confuse old userspace tools"
Randy Dunlap9148fe82007-12-31 10:05:34 -0800625 depends on SYSFS
Kay Sieversf6ee6492009-04-16 19:56:37 +0200626 default n
Ingo Molnard47846c2008-03-04 14:54:47 +0100627 select SYSFS_DEPRECATED
Kay Sievers88a22c92006-09-14 11:23:28 +0200628 help
Kay Sieversfce3e802008-11-01 14:03:00 +0100629 This option switches the layout of sysfs to the deprecated
Kay Sieversf6ee6492009-04-16 19:56:37 +0200630 version. Do not use it on recent distributions.
Kay Sievers88a22c92006-09-14 11:23:28 +0200631
Kay Sieversfce3e802008-11-01 14:03:00 +0100632 The current sysfs layout features a unified device tree at
633 /sys/devices/, which is able to express a hierarchy between
634 class devices. If the deprecated option is set to Y, the
635 unified device tree is split into a bus device tree at
636 /sys/devices/ and several individual class device trees at
637 /sys/class/. The class and bus devices will be connected by
638 "<subsystem>:<name>" and the "device" links. The "block"
639 class devices, will not show up in /sys/class/block/. Some
640 subsystems will suppress the creation of some devices which
641 depend on the unified device tree.
Kay Sievers88a22c92006-09-14 11:23:28 +0200642
Kay Sieversfce3e802008-11-01 14:03:00 +0100643 This option is not a pure compatibility option that can
644 be safely enabled on newer distributions. It will change the
645 layout of sysfs to the non-extensible deprecated version,
646 and disable some features, which can not be exported without
647 confusing older userspace tools. Since 2007/2008 all major
648 distributions do not enable this option, and ship no tools which
649 depend on the deprecated layout or this option.
650
651 If you are using a new kernel on an older distribution, or use
652 older userspace tools, you might need to say Y here. Do not say Y,
653 if the original kernel, that came with your distribution, has
654 this option set to N.
Kay Sievers88a22c92006-09-14 11:23:28 +0200655
Jens Axboeb86ff9812006-03-23 19:56:55 +0100656config RELAY
657 bool "Kernel->user space relay support (formerly relayfs)"
658 help
659 This option enables support for relay interface support in
660 certain file systems (such as debugfs).
661 It is designed to provide an efficient mechanism for tools and
662 facilities to relay large amounts of data from kernel space to
663 user space.
664
665 If unsure, say N.
666
Pavel Emelyanovc5289a62008-02-08 04:18:19 -0800667config NAMESPACES
668 bool "Namespaces support" if EMBEDDED
669 default !EMBEDDED
670 help
671 Provides the way to make tasks work with different objects using
672 the same id. For example same IPC id may refer to different objects
673 or same user id or pid may refer to different tasks when used in
674 different namespaces.
675
Pavel Emelyanov58bfdd6d2008-02-08 04:18:21 -0800676config UTS_NS
677 bool "UTS namespace"
678 depends on NAMESPACES
679 help
680 In this namespace tasks see different info provided with the
681 uname() system call
682
Pavel Emelyanovae5e1b22008-02-08 04:18:22 -0800683config IPC_NS
684 bool "IPC namespace"
Serge E. Hallyn614b84c2009-04-06 19:01:08 -0700685 depends on NAMESPACES && (SYSVIPC || POSIX_MQUEUE)
Pavel Emelyanovae5e1b22008-02-08 04:18:22 -0800686 help
687 In this namespace tasks work with IPC ids which correspond to
Serge E. Hallyn614b84c2009-04-06 19:01:08 -0700688 different IPC objects in different namespaces.
Pavel Emelyanovae5e1b22008-02-08 04:18:22 -0800689
Pavel Emelyanovaee16ce2008-02-08 04:18:23 -0800690config USER_NS
691 bool "User namespace (EXPERIMENTAL)"
692 depends on NAMESPACES && EXPERIMENTAL
693 help
694 This allows containers, i.e. vservers, to use user namespaces
695 to provide different user info for different servers.
696 If unsure, say N.
697
Pavel Emelyanov74bd59b2008-02-08 04:18:24 -0800698config PID_NS
699 bool "PID Namespaces (EXPERIMENTAL)"
700 default n
701 depends on NAMESPACES && EXPERIMENTAL
702 help
Heikki Orsila12d2b8f2008-07-06 15:48:02 +0300703 Support process id namespaces. This allows having multiple
Matt LaPlante692105b2009-01-26 11:12:25 +0100704 processes with the same pid as long as they are in different
Pavel Emelyanov74bd59b2008-02-08 04:18:24 -0800705 pid namespaces. This is a building block of containers.
706
707 Unless you want to work with an experimental feature
708 say N here.
709
Matt Helsleyd6eb6332009-01-26 12:25:55 -0800710config NET_NS
711 bool "Network namespace"
712 default n
713 depends on NAMESPACES && EXPERIMENTAL && NET
714 help
715 Allow user space to create what appear to be multiple instances
716 of the network stack.
717
Dimitri Gorokhovikf9916332007-03-06 01:42:17 -0800718config BLK_DEV_INITRD
719 bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
720 depends on BROKEN || !FRV
721 help
722 The initial RAM filesystem is a ramfs which is loaded by the
723 boot loader (loadlin or lilo) and that is mounted as root
724 before the normal boot procedure. It is typically used to
725 load modules needed to mount the "real" root file system,
726 etc. See <file:Documentation/initrd.txt> for details.
727
728 If RAM disk support (BLK_DEV_RAM) is also included, this
729 also enables initial RAM disk (initrd) support and adds
730 15 Kbytes (more on some other architectures) to the kernel size.
731
732 If unsure say Y.
733
Jean-Paul Samanc33df4e2007-02-10 01:44:43 -0800734if BLK_DEV_INITRD
735
Sam Ravnborgdbec4862005-08-10 20:44:50 +0200736source "usr/Kconfig"
737
Jean-Paul Samanc33df4e2007-02-10 01:44:43 -0800738endif
739
Linus Torvaldsc45b4f12005-12-14 18:52:21 -0800740config CC_OPTIMIZE_FOR_SIZE
Ingo Molnar96fffeb2008-04-28 01:39:43 +0200741 bool "Optimize for size"
Linus Torvaldsc45b4f12005-12-14 18:52:21 -0800742 default y
Linus Torvaldsc45b4f12005-12-14 18:52:21 -0800743 help
744 Enabling this option will pass "-Os" instead of "-O2" to gcc
745 resulting in a smaller kernel.
746
jkacur775a7222008-07-16 00:31:16 +0200747 If unsure, say Y.
Linus Torvaldsc45b4f12005-12-14 18:52:21 -0800748
Randy Dunlap08470622006-09-30 23:28:13 -0700749config SYSCTL
750 bool
751
Randy Dunlapb943c462009-03-10 12:55:46 -0700752config ANON_INODES
753 bool
754
Linus Torvalds1da177e2005-04-16 15:20:36 -0700755menuconfig EMBEDDED
756 bool "Configure standard kernel features (for small systems)"
757 help
758 This option allows certain base kernel options and settings
759 to be disabled or tweaked. This is for specialized
760 environments which can tolerate a "non-standard" kernel.
761 Only use this if you really know what you are doing.
762
Chuck Ebbertae81f9e2006-09-16 12:15:53 -0700763config UID16
764 bool "Enable 16-bit UID system calls" if EMBEDDED
David S. Miller09337f52008-04-26 03:17:12 -0700765 depends on ARM || BLACKFIN || CRIS || FRV || H8300 || X86_32 || M68K || (S390 && !64BIT) || SUPERH || SPARC32 || (SPARC64 && COMPAT) || UML || (X86_64 && IA32_EMULATION)
Chuck Ebbertae81f9e2006-09-16 12:15:53 -0700766 default y
767 help
768 This enables the legacy 16-bit UID syscall wrappers.
769
Eric W. Biedermanb89a8172006-09-27 01:51:04 -0700770config SYSCTL_SYSCALL
Randy Dunlap08470622006-09-30 23:28:13 -0700771 bool "Sysctl syscall support" if EMBEDDED
Eric W. Biederman13bb7e32006-11-08 17:44:51 -0800772 default y
Eric W. Biedermanb89a8172006-09-27 01:51:04 -0700773 select SYSCTL
774 ---help---
Eric W. Biederman13bb7e32006-11-08 17:44:51 -0800775 sys_sysctl uses binary paths that have been found challenging
776 to properly maintain and use. The interface in /proc/sys
777 using paths with ascii names is now the primary path to this
778 information.
Eric W. Biedermanb89a8172006-09-27 01:51:04 -0700779
Eric W. Biederman13bb7e32006-11-08 17:44:51 -0800780 Almost nothing using the binary sysctl interface so if you are
781 trying to save some space it is probably safe to disable this,
782 making your kernel marginally smaller.
Eric W. Biedermanb89a8172006-09-27 01:51:04 -0700783
Eric W. Biederman13bb7e32006-11-08 17:44:51 -0800784 If unsure say Y here.
Chuck Ebbertae81f9e2006-09-16 12:15:53 -0700785
Linus Torvalds1da177e2005-04-16 15:20:36 -0700786config KALLSYMS
Jesper Juhl979c6a12006-12-12 19:25:11 +0100787 bool "Load all symbols for debugging/ksymoops" if EMBEDDED
Linus Torvalds1da177e2005-04-16 15:20:36 -0700788 default y
789 help
790 Say Y here to let the kernel print out symbolic crash information and
791 symbolic stack backtraces. This increases the size of the kernel
792 somewhat, as all symbols have to be loaded into the kernel image.
793
794config KALLSYMS_ALL
795 bool "Include all symbols in kallsyms"
796 depends on DEBUG_KERNEL && KALLSYMS
797 help
798 Normally kallsyms only contains the symbols of functions, for nicer
799 OOPS messages. Some debuggers can use kallsyms for other
Jesper Juhlf9f97bc2005-07-20 05:43:05 +0200800 symbols too: say Y here to include all symbols, if you need them
801 and you don't care about adding 300k to the size of your kernel.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700802
803 Say N.
804
805config KALLSYMS_EXTRA_PASS
806 bool "Do an extra kallsyms pass"
807 depends on KALLSYMS
808 help
809 If kallsyms is not working correctly, the build will fail with
810 inconsistent kallsyms data. If that occurs, log a bug report and
811 turn on KALLSYMS_EXTRA_PASS which should result in a stable build.
812 Always say N here unless you find a bug in kallsyms, which must be
813 reported. KALLSYMS_EXTRA_PASS is only a temporary workaround while
814 you wait for kallsyms to be fixed.
815
Matt Mackalld59745c2005-05-01 08:59:02 -0700816
Greg Kroah-Hartman712f47c2005-11-16 11:27:07 -0800817config HOTPLUG
818 bool "Support for hot-pluggable devices" if EMBEDDED
819 default y
820 help
821 This option is provided for the case where no hotplug or uevent
822 capabilities is wanted by the kernel. You should only consider
823 disabling this option for embedded systems that do not use modules, a
824 dynamic /dev tree, or dynamic device discovery. Just say Y.
825
Matt Mackalld59745c2005-05-01 08:59:02 -0700826config PRINTK
827 default y
828 bool "Enable support for printk" if EMBEDDED
829 help
830 This option enables normal printk support. Removing it
831 eliminates most of the message strings from the kernel image
832 and makes the kernel more or less silent. As this makes it
833 very difficult to diagnose system problems, saying N here is
834 strongly discouraged.
835
Matt Mackallc8538a72005-05-01 08:59:01 -0700836config BUG
837 bool "BUG() support" if EMBEDDED
838 default y
839 help
840 Disabling this option eliminates support for BUG and WARN, reducing
841 the size of your kernel image and potentially quietly ignoring
842 numerous fatal conditions. You should only consider disabling this
843 option for embedded systems with no facilities for reporting errors.
844 Just say Y.
845
Matt Mackall708e9a72006-01-08 01:05:25 -0800846config ELF_CORE
847 default y
848 bool "Enable ELF core dumps" if EMBEDDED
849 help
850 Enable support for generating core dumps. Disabling saves about 4k.
851
Stas Sergeeve5e1d3c2008-05-07 12:39:56 +0200852config PCSPKR_PLATFORM
853 bool "Enable PC-Speaker support" if EMBEDDED
854 depends on ALPHA || X86 || MIPS || PPC_PREP || PPC_CHRP || PPC_PSERIES
855 default y
856 help
857 This option allows to disable the internal PC-Speaker
858 support, saving some memory.
859
Linus Torvalds1da177e2005-04-16 15:20:36 -0700860config BASE_FULL
861 default y
862 bool "Enable full-sized data structures for core" if EMBEDDED
863 help
864 Disabling this option reduces the size of miscellaneous core
865 kernel data structures. This saves memory on small machines,
866 but may reduce performance.
867
868config FUTEX
869 bool "Enable futex support" if EMBEDDED
870 default y
Ingo Molnar23f78d4a2006-06-27 02:54:53 -0700871 select RT_MUTEXES
Linus Torvalds1da177e2005-04-16 15:20:36 -0700872 help
873 Disabling this option will cause the kernel to be built without
874 support for "fast userspace mutexes". The resulting kernel may not
875 run glibc-based applications correctly.
876
877config EPOLL
878 bool "Enable eventpoll support" if EMBEDDED
879 default y
Adrian Bunk448e3ce2007-07-31 00:39:10 -0700880 select ANON_INODES
Linus Torvalds1da177e2005-04-16 15:20:36 -0700881 help
882 Disabling this option will cause the kernel to be built without
883 support for epoll family of system calls.
884
Davide Libenzifba2afa2007-05-10 22:23:13 -0700885config SIGNALFD
886 bool "Enable signalfd() system call" if EMBEDDED
Adrian Bunk448e3ce2007-07-31 00:39:10 -0700887 select ANON_INODES
Davide Libenzifba2afa2007-05-10 22:23:13 -0700888 default y
889 help
890 Enable the signalfd() system call that allows to receive signals
891 on a file descriptor.
892
893 If unsure, say Y.
894
Davide Libenzib215e282007-05-10 22:23:16 -0700895config TIMERFD
896 bool "Enable timerfd() system call" if EMBEDDED
Adrian Bunk448e3ce2007-07-31 00:39:10 -0700897 select ANON_INODES
Davide Libenzib215e282007-05-10 22:23:16 -0700898 default y
899 help
900 Enable the timerfd() system call that allows to receive timer
901 events on a file descriptor.
902
903 If unsure, say Y.
904
Davide Libenzie1ad7462007-05-10 22:23:19 -0700905config EVENTFD
906 bool "Enable eventfd() system call" if EMBEDDED
Adrian Bunk448e3ce2007-07-31 00:39:10 -0700907 select ANON_INODES
Davide Libenzie1ad7462007-05-10 22:23:19 -0700908 default y
909 help
910 Enable the eventfd() system call that allows to receive both
911 kernel notification (ie. KAIO) or userspace notifications.
912
913 If unsure, say Y.
914
Linus Torvalds1da177e2005-04-16 15:20:36 -0700915config SHMEM
916 bool "Use full shmem filesystem" if EMBEDDED
917 default y
918 depends on MMU
919 help
920 The shmem is an internal filesystem used to manage shared memory.
921 It is backed by swap and manages resource limits. It is also exported
922 to userspace as tmpfs if TMPFS is enabled. Disabling this
923 option replaces shmem and tmpfs with the much simpler ramfs code,
924 which may be appropriate on small systems without swap.
925
Thomas Petazzoniebf3f092008-10-15 22:05:12 -0700926config AIO
927 bool "Enable AIO support" if EMBEDDED
928 default y
929 help
930 This option enables POSIX asynchronous I/O which may by used
931 by some high performance threaded applications. Disabling
932 this option saves about 7k.
933
Thomas Gleixner0793a612008-12-04 20:12:29 +0100934config HAVE_PERF_COUNTERS
935 bool
Mike Frysinger018df722009-06-12 13:17:43 -0400936 help
937 See tools/perf/design.txt for details.
Thomas Gleixner0793a612008-12-04 20:12:29 +0100938
939menu "Performance Counters"
940
941config PERF_COUNTERS
942 bool "Kernel Performance Counters"
Ingo Molnarf2654262009-06-29 10:40:20 +0200943 default y if PROFILING
Thomas Gleixner0793a612008-12-04 20:12:29 +0100944 depends on HAVE_PERF_COUNTERS
Ingo Molnar4c59e462008-12-08 19:38:33 +0100945 select ANON_INODES
Thomas Gleixner0793a612008-12-04 20:12:29 +0100946 help
947 Enable kernel support for performance counter hardware.
948
949 Performance counters are special hardware registers available
950 on most modern CPUs. These registers count the number of certain
951 types of hw events: such as instructions executed, cachemisses
952 suffered, or branches mis-predicted - without slowing down the
953 kernel or applications. These registers can also trigger interrupts
954 when a threshold number of events have passed - and can thus be
955 used to profile the code that runs on that CPU.
956
957 The Linux Performance Counter subsystem provides an abstraction of
958 these hardware capabilities, available via a system call. It
959 provides per task and per CPU counters, and it provides event
960 capabilities on top of those.
961
962 Say Y if unsure.
963
Peter Zijlstrae077df42009-03-19 20:26:17 +0100964config EVENT_PROFILE
Peter Zijlstra470a1392009-07-29 10:50:09 +0200965 bool "Tracepoint profiling sources"
Chris Wilsond4d7d0b2009-07-06 09:31:33 +0100966 depends on PERF_COUNTERS && EVENT_TRACING
Peter Zijlstrae077df42009-03-19 20:26:17 +0100967 default y
Peter Zijlstra470a1392009-07-29 10:50:09 +0200968 help
969 Allow the use of tracepoints as software performance counters.
970
971 When this is enabled, you can create perf counters based on
972 tracepoints using PERF_TYPE_TRACEPOINT and the tracepoint ID
973 found in debugfs://tracing/events/*/*/id. (The -e/--events
974 option to the perf tool can parse and interpret symbolic
975 tracepoints, in the subsystem:tracepoint_name format.)
Peter Zijlstrae077df42009-03-19 20:26:17 +0100976
Thomas Gleixner0793a612008-12-04 20:12:29 +0100977endmenu
978
Christoph Lameterf8891e52006-06-30 01:55:45 -0700979config VM_EVENT_COUNTERS
980 default y
981 bool "Enable VM event counters for /proc/vmstat" if EMBEDDED
982 help
Paul Jackson2aea4fb2006-12-22 01:06:10 -0800983 VM event counters are needed for event counts to be shown.
984 This option allows the disabling of the VM event counters
985 on EMBEDDED systems. /proc/vmstat will only show page counts
986 if VM event counters are disabled.
Christoph Lameterf8891e52006-06-30 01:55:45 -0700987
Thomas Petazzoni3d137312008-08-19 10:28:24 +0200988config PCI_QUIRKS
989 default y
Geert Uytterhoeven61cfc7e2008-10-22 08:53:25 +0200990 bool "Enable PCI quirk workarounds" if EMBEDDED
991 depends on PCI
Thomas Petazzoni3d137312008-08-19 10:28:24 +0200992 help
993 This enables workarounds for various PCI chipset
994 bugs/quirks. Disable this only if your target machine is
995 unaffected by PCI quirks.
996
Christoph Lameter41ecc552007-05-09 02:32:44 -0700997config SLUB_DEBUG
998 default y
999 bool "Enable SLUB debugging support" if EMBEDDED
Christoph Lameterf6acb632008-04-29 16:16:06 -07001000 depends on SLUB && SYSFS
Christoph Lameter41ecc552007-05-09 02:32:44 -07001001 help
1002 SLUB has extensive debug support features. Disabling these can
1003 result in significant savings in code size. This also disables
1004 SLUB sysfs support. /sys/slab will not exist and there will be
1005 no support for cache validation etc.
1006
Randy Dunlapa9eb5222009-06-05 15:02:47 -07001007config STRIP_ASM_SYMS
1008 bool "Strip assembler-generated symbols during link"
1009 default n
1010 help
1011 Strip internal assembler-generated symbols during a link (symbols
1012 that look like '.Lxxx') so they don't pollute the output of
1013 get_wchan() and suchlike.
1014
Randy Dunlapb943c462009-03-10 12:55:46 -07001015config COMPAT_BRK
1016 bool "Disable heap randomization"
1017 default y
1018 help
1019 Randomizing heap placement makes heap exploits harder, but it
1020 also breaks ancient binaries (including anything libc5 based).
1021 This option changes the bootup default to heap randomization
Matt LaPlante692105b2009-01-26 11:12:25 +01001022 disabled, and can be overridden at runtime by setting
Randy Dunlapb943c462009-03-10 12:55:46 -07001023 /proc/sys/kernel/randomize_va_space to 2.
1024
1025 On non-ancient distros (post-2000 ones) N is usually a safe choice.
1026
Christoph Lameter81819f02007-05-06 14:49:36 -07001027choice
1028 prompt "Choose SLAB allocator"
Christoph Lametera0acd822007-07-17 04:03:32 -07001029 default SLUB
Christoph Lameter81819f02007-05-06 14:49:36 -07001030 help
1031 This option allows to select a slab allocator.
1032
1033config SLAB
1034 bool "SLAB"
1035 help
1036 The regular slab allocator that is established and known to work
Christoph Lameter34013882007-05-09 02:32:47 -07001037 well in all environments. It organizes cache hot objects in
Simon Arlott02f56212008-11-05 22:18:19 +00001038 per cpu and per node queues.
Christoph Lameter81819f02007-05-06 14:49:36 -07001039
1040config SLUB
Christoph Lameter81819f02007-05-06 14:49:36 -07001041 bool "SLUB (Unqueued Allocator)"
1042 help
1043 SLUB is a slab allocator that minimizes cache line usage
1044 instead of managing queues of cached objects (SLAB approach).
1045 Per cpu caching is realized using slabs of objects instead
1046 of queues of objects. SLUB can use memory efficiently
Simon Arlott02f56212008-11-05 22:18:19 +00001047 and has enhanced diagnostics. SLUB is the default choice for
1048 a slab allocator.
Christoph Lameter81819f02007-05-06 14:49:36 -07001049
1050config SLOB
Paul Mundt84a01c22007-07-15 23:38:24 -07001051 depends on EMBEDDED
Christoph Lameter81819f02007-05-06 14:49:36 -07001052 bool "SLOB (Simple Allocator)"
1053 help
Matt Mackall37291452008-02-04 22:29:38 -08001054 SLOB replaces the stock allocator with a drastically simpler
1055 allocator. SLOB is generally more space efficient but
1056 does not perform as well on large systems.
Christoph Lameter81819f02007-05-06 14:49:36 -07001057
1058endchoice
1059
Mathieu Desnoyers125e5642008-02-02 15:10:36 -05001060config PROFILING
1061 bool "Profiling support (EXPERIMENTAL)"
1062 help
1063 Say Y here to enable the extended profiling support mechanisms used
1064 by profilers such as OProfile.
1065
Ingo Molnar5f87f112008-07-23 14:15:22 +02001066#
1067# Place an empty function call at each tracepoint site. Can be
1068# dynamically changed for a probe function.
1069#
Mathieu Desnoyers97e1c182008-07-18 12:16:16 -04001070config TRACEPOINTS
Ingo Molnar5f87f112008-07-23 14:15:22 +02001071 bool
Mathieu Desnoyers97e1c182008-07-18 12:16:16 -04001072
Mathieu Desnoyers125e5642008-02-02 15:10:36 -05001073config MARKERS
1074 bool "Activate markers"
Frederic Weisbecker91f73f92009-02-20 17:34:06 +01001075 select TRACEPOINTS
Mathieu Desnoyers125e5642008-02-02 15:10:36 -05001076 help
1077 Place an empty function call at each marker site. Can be
1078 dynamically changed for a probe function.
1079
Mathieu Desnoyersfb32e032008-02-02 15:10:33 -05001080source "arch/Kconfig"
1081
David Howells07fe7cb2009-04-03 16:42:35 +01001082config SLOW_WORK
1083 default n
David Howells1c2d0082009-04-06 15:47:25 +01001084 bool
David Howells07fe7cb2009-04-03 16:42:35 +01001085 help
1086 The slow work thread pool provides a number of dynamically allocated
1087 threads that can be used by the kernel to perform operations that
1088 take a relatively long time.
1089
1090 An example of this would be CacheFiles doing a path lookup followed
1091 by a series of mkdirs and a create call, all of which have to touch
1092 disk.
1093
David Howells1c2d0082009-04-06 15:47:25 +01001094 See Documentation/slow-work.txt.
1095
Linus Torvalds1da177e2005-04-16 15:20:36 -07001096endmenu # General setup
1097
Dmitry Baryshkovee7e5512008-06-29 14:18:46 +04001098config HAVE_GENERIC_DMA_COHERENT
1099 bool
1100 default n
1101
Linus Torvalds158a9622008-01-02 13:04:48 -08001102config SLABINFO
1103 bool
1104 depends on PROC_FS
Christoph Lameter0f389ec2008-04-14 18:53:02 +03001105 depends on SLAB || SLUB_DEBUG
Linus Torvalds158a9622008-01-02 13:04:48 -08001106 default y
1107
Chuck Ebbertae81f9e2006-09-16 12:15:53 -07001108config RT_MUTEXES
1109 boolean
Chuck Ebbertae81f9e2006-09-16 12:15:53 -07001110
Linus Torvalds1da177e2005-04-16 15:20:36 -07001111config BASE_SMALL
1112 int
1113 default 0 if BASE_FULL
1114 default 1 if !BASE_FULL
1115
Jan Engelhardt66da5732007-07-15 23:39:29 -07001116menuconfig MODULES
Linus Torvalds1da177e2005-04-16 15:20:36 -07001117 bool "Enable loadable module support"
1118 help
1119 Kernel modules are small pieces of compiled code which can
1120 be inserted in the running kernel, rather than being
1121 permanently built into the kernel. You use the "modprobe"
1122 tool to add (and sometimes remove) them. If you say Y here,
1123 many parts of the kernel can be built as modules (by
1124 answering M instead of Y where indicated): this is most
1125 useful for infrequently used options which are not required
1126 for booting. For more information, see the man pages for
1127 modprobe, lsmod, modinfo, insmod and rmmod.
1128
1129 If you say Y here, you will need to run "make
1130 modules_install" to put the modules under /lib/modules/
1131 where modprobe can find them (you may need to be root to do
1132 this).
1133
1134 If unsure, say Y.
1135
Robert P. J. Day0b0de142008-08-04 13:31:32 -04001136if MODULES
1137
Linus Torvalds826e4502008-05-04 17:04:16 -07001138config MODULE_FORCE_LOAD
1139 bool "Forced module loading"
Linus Torvalds826e4502008-05-04 17:04:16 -07001140 default n
1141 help
Rusty Russell91e37a72008-05-09 16:25:28 +10001142 Allow loading of modules without version information (ie. modprobe
1143 --force). Forced module loading sets the 'F' (forced) taint flag and
1144 is usually a really bad idea.
Linus Torvalds826e4502008-05-04 17:04:16 -07001145
Linus Torvalds1da177e2005-04-16 15:20:36 -07001146config MODULE_UNLOAD
1147 bool "Module unloading"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001148 help
1149 Without this option you will not be able to unload any
1150 modules (note that some modules may not be unloadable
Denys Vlasenkof7f5b672008-07-22 19:24:26 -05001151 anyway), which makes your kernel smaller, faster
1152 and simpler. If unsure, say Y.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001153
1154config MODULE_FORCE_UNLOAD
1155 bool "Forced module unloading"
1156 depends on MODULE_UNLOAD && EXPERIMENTAL
1157 help
1158 This option allows you to force a module to unload, even if the
1159 kernel believes it is unsafe: the kernel will remove the module
1160 without waiting for anyone to stop using it (using the -f option to
1161 rmmod). This is mainly for kernel developers and desperate users.
1162 If unsure, say N.
1163
Linus Torvalds1da177e2005-04-16 15:20:36 -07001164config MODVERSIONS
Sam Ravnborg0d541642005-12-26 23:04:02 +01001165 bool "Module versioning support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001166 help
1167 Usually, you have to use modules compiled with your kernel.
1168 Saying Y here makes it sometimes possible to use modules
1169 compiled for different kernels, by adding enough information
1170 to the modules to (hopefully) spot any changes which would
1171 make them incompatible with the kernel you are running. If
1172 unsure, say N.
1173
1174config MODULE_SRCVERSION_ALL
1175 bool "Source checksum for all modules"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001176 help
1177 Modules which contain a MODULE_VERSION get an extra "srcversion"
1178 field inserted into their modinfo section, which contains a
1179 sum of the source files which made it. This helps maintainers
1180 see exactly which source was used to build a module (since
1181 others sometimes change the module source without updating
1182 the version). With this option, such a "srcversion" field
1183 will be created for all modules. If unsure, say N.
1184
Robert P. J. Day0b0de142008-08-04 13:31:32 -04001185endif # MODULES
1186
Rusty Russell98a79d62008-12-13 21:19:41 +10301187config INIT_ALL_POSSIBLE
1188 bool
1189 help
1190 Back when each arch used to define their own cpu_online_map and
1191 cpu_possible_map, some of them chose to initialize cpu_possible_map
1192 with all 1s, and others with all 0s. When they were centralised,
1193 it was better to provide this option than to break all the archs
Matt LaPlante692105b2009-01-26 11:12:25 +01001194 and have several arch maintainers pursuing me down dark alleys.
Rusty Russell98a79d62008-12-13 21:19:41 +10301195
Linus Torvalds1da177e2005-04-16 15:20:36 -07001196config STOP_MACHINE
1197 bool
1198 default y
1199 depends on (SMP && MODULE_UNLOAD) || HOTPLUG_CPU
1200 help
1201 Need stop_machine() primitive.
Jens Axboe3a65dfe2005-11-04 08:43:35 +01001202
Jens Axboe3a65dfe2005-11-04 08:43:35 +01001203source "block/Kconfig"
Avi Kivitye98c3202007-10-16 23:27:31 -07001204
1205config PREEMPT_NOTIFIERS
1206 bool
Paul E. McKenneye260be62008-01-25 21:08:24 +01001207