blob: 33745adc826b56135790073ded8d54820305f988 [file] [log] [blame]
Dan Williams6f231dd2011-07-02 22:56:22 -07001/*
2 * This file is provided under a dual BSD/GPLv2 license. When using or
3 * redistributing this file, you may do so under either license.
4 *
5 * GPL LICENSE SUMMARY
6 *
7 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of version 2 of the GNU General Public License as
11 * published by the Free Software Foundation.
12 *
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 * General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
21 * The full GNU General Public License is included in this distribution
22 * in the file called LICENSE.GPL.
23 *
24 * BSD LICENSE
25 *
26 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
27 * All rights reserved.
28 *
29 * Redistribution and use in source and binary forms, with or without
30 * modification, are permitted provided that the following conditions
31 * are met:
32 *
33 * * Redistributions of source code must retain the above copyright
34 * notice, this list of conditions and the following disclaimer.
35 * * Redistributions in binary form must reproduce the above copyright
36 * notice, this list of conditions and the following disclaimer in
37 * the documentation and/or other materials provided with the
38 * distribution.
39 * * Neither the name of Intel Corporation nor the names of its
40 * contributors may be used to endorse or promote products derived
41 * from this software without specific prior written permission.
42 *
43 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
44 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
45 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
46 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
47 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
48 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
49 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
50 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
51 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
52 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
53 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
54 */
55
56#ifndef __SCU_REMOTE_NODE_CONTEXT_HEADER__
57#define __SCU_REMOTE_NODE_CONTEXT_HEADER__
58
59/**
60 * This file contains the structures and constatns used by the SCU hardware to
61 * describe a remote node context.
62 *
63 *
64 */
Dan Williams6f231dd2011-07-02 22:56:22 -070065
66/**
67 * struct ssp_remote_node_context - This structure contains the SCU hardware
68 * definition for an SSP remote node.
69 *
70 *
71 */
72struct ssp_remote_node_context {
73 /* WORD 0 */
74
75 /**
76 * This field is the remote node index assigned for this remote node. All
77 * remote nodes must have a unique remote node index. The value of the remote
78 * node index can not exceed the maximum number of remote nodes reported in
79 * the SCU device context capacity register.
80 */
81 u32 remote_node_index:12;
82 u32 reserved0_1:4;
83
84 /**
85 * This field tells the SCU hardware how many simultaneous connections that
86 * this remote node will support.
87 */
88 u32 remote_node_port_width:4;
89
90 /**
91 * This field tells the SCU hardware which logical port to associate with this
92 * remote node.
93 */
94 u32 logical_port_index:3;
95 u32 reserved0_2:5;
96
97 /**
98 * This field will enable the I_T nexus loss timer for this remote node.
99 */
100 u32 nexus_loss_timer_enable:1;
101
102 /**
103 * This field is the for driver debug only and is not used.
104 */
105 u32 check_bit:1;
106
107 /**
108 * This field must be set to true when the hardware DMAs the remote node
109 * context to the hardware SRAM. When the remote node is being invalidated
110 * this field must be set to false.
111 */
112 u32 is_valid:1;
113
114 /**
115 * This field must be set to true.
116 */
117 u32 is_remote_node_context:1;
118
119 /* WORD 1 - 2 */
120
121 /**
122 * This is the low word of the remote device SAS Address
123 */
124 u32 remote_sas_address_lo;
125
126 /**
127 * This field is the high word of the remote device SAS Address
128 */
129 u32 remote_sas_address_hi;
130
131 /* WORD 3 */
132 /**
133 * This field reprensets the function number assigned to this remote device.
134 * This value must match the virtual function number that is being used to
135 * communicate to the device.
136 */
137 u32 function_number:8;
138 u32 reserved3_1:8;
139
140 /**
141 * This field provides the driver a way to cheat on the arbitration wait time
142 * for this remote node.
143 */
144 u32 arbitration_wait_time:16;
145
146 /* WORD 4 */
147 /**
148 * This field tells the SCU hardware how long this device may occupy the
149 * connection before it must be closed.
150 */
151 u32 connection_occupancy_timeout:16;
152
153 /**
154 * This field tells the SCU hardware how long to maintain a connection when
155 * there are no frames being transmitted on the link.
156 */
157 u32 connection_inactivity_timeout:16;
158
159 /* WORD 5 */
160 /**
161 * This field allows the driver to cheat on the arbitration wait time for this
162 * remote node.
163 */
164 u32 initial_arbitration_wait_time:16;
165
166 /**
167 * This field is tells the hardware what to program for the connection rate in
168 * the open address frame. See the SAS spec for valid values.
169 */
170 u32 oaf_connection_rate:4;
171
172 /**
173 * This field tells the SCU hardware what to program for the features in the
174 * open address frame. See the SAS spec for valid values.
175 */
176 u32 oaf_features:4;
177
178 /**
179 * This field tells the SCU hardware what to use for the source zone group in
180 * the open address frame. See the SAS spec for more details on zoning.
181 */
182 u32 oaf_source_zone_group:8;
183
184 /* WORD 6 */
185 /**
186 * This field tells the SCU hardware what to use as the more capibilities in
187 * the open address frame. See the SAS Spec for details.
188 */
189 u32 oaf_more_compatibility_features;
190
191 /* WORD 7 */
192 u32 reserved7;
193
194};
195
196/**
197 * struct stp_remote_node_context - This structure contains the SCU hardware
198 * definition for a STP remote node.
199 *
200 * STP Targets are not yet supported so this definition is a placeholder until
201 * we do support them.
202 */
203struct stp_remote_node_context {
204 /**
205 * Placeholder data for the STP remote node.
206 */
207 u32 data[8];
208
209};
210
211/**
212 * This union combines the SAS and SATA remote node definitions.
213 *
214 * union scu_remote_node_context
215 */
216union scu_remote_node_context {
217 /**
218 * SSP Remote Node
219 */
220 struct ssp_remote_node_context ssp;
221
222 /**
223 * STP Remote Node
224 */
225 struct stp_remote_node_context stp;
226
227};
228
229#endif /* __SCU_REMOTE_NODE_CONTEXT_HEADER__ */