blob: 9d08f27208a187db0823fee6dcabf22ba3ac0668 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * linux/drivers/char/amba.c
3 *
4 * Driver for AMBA serial ports
5 *
6 * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
7 *
8 * Copyright 1999 ARM Limited
9 * Copyright (C) 2000 Deep Blue Solutions Ltd.
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
15 *
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
24 *
Linus Torvalds1da177e2005-04-16 15:20:36 -070025 * This is a generic driver for ARM AMBA-type serial ports. They
26 * have a lot of 16550-like features, but are not register compatible.
27 * Note that although they do have CTS, DCD and DSR inputs, they do
28 * not have an RI input, nor do they have DTR or RTS outputs. If
29 * required, these have to be supplied via some other means (eg, GPIO)
30 * and hooked into this driver.
31 */
Linus Torvalds1da177e2005-04-16 15:20:36 -070032
33#if defined(CONFIG_SERIAL_AMBA_PL011_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
34#define SUPPORT_SYSRQ
35#endif
36
37#include <linux/module.h>
38#include <linux/ioport.h>
39#include <linux/init.h>
40#include <linux/console.h>
41#include <linux/sysrq.h>
42#include <linux/device.h>
43#include <linux/tty.h>
44#include <linux/tty_flip.h>
45#include <linux/serial_core.h>
46#include <linux/serial.h>
Russell Kinga62c80e2006-01-07 13:52:45 +000047#include <linux/amba/bus.h>
48#include <linux/amba/serial.h>
Russell Kingf8ce2542006-01-07 16:15:52 +000049#include <linux/clk.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070050
51#include <asm/io.h>
Russell Kingc6b8fda2005-10-28 14:05:16 +010052#include <asm/sizes.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070053
54#define UART_NR 14
55
56#define SERIAL_AMBA_MAJOR 204
57#define SERIAL_AMBA_MINOR 64
58#define SERIAL_AMBA_NR UART_NR
59
60#define AMBA_ISR_PASS_LIMIT 256
61
Russell Kingb63d4f02005-11-19 11:10:35 +000062#define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE)
63#define UART_DUMMY_DR_RX (1 << 16)
Linus Torvalds1da177e2005-04-16 15:20:36 -070064
65/*
66 * We wrap our port structure around the generic uart_port.
67 */
68struct uart_amba_port {
69 struct uart_port port;
70 struct clk *clk;
71 unsigned int im; /* interrupt mask */
72 unsigned int old_status;
73};
74
Russell Kingb129a8c2005-08-31 10:12:14 +010075static void pl011_stop_tx(struct uart_port *port)
Linus Torvalds1da177e2005-04-16 15:20:36 -070076{
77 struct uart_amba_port *uap = (struct uart_amba_port *)port;
78
79 uap->im &= ~UART011_TXIM;
80 writew(uap->im, uap->port.membase + UART011_IMSC);
81}
82
Russell Kingb129a8c2005-08-31 10:12:14 +010083static void pl011_start_tx(struct uart_port *port)
Linus Torvalds1da177e2005-04-16 15:20:36 -070084{
85 struct uart_amba_port *uap = (struct uart_amba_port *)port;
86
87 uap->im |= UART011_TXIM;
88 writew(uap->im, uap->port.membase + UART011_IMSC);
89}
90
91static void pl011_stop_rx(struct uart_port *port)
92{
93 struct uart_amba_port *uap = (struct uart_amba_port *)port;
94
95 uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM|
96 UART011_PEIM|UART011_BEIM|UART011_OEIM);
97 writew(uap->im, uap->port.membase + UART011_IMSC);
98}
99
100static void pl011_enable_ms(struct uart_port *port)
101{
102 struct uart_amba_port *uap = (struct uart_amba_port *)port;
103
104 uap->im |= UART011_RIMIM|UART011_CTSMIM|UART011_DCDMIM|UART011_DSRMIM;
105 writew(uap->im, uap->port.membase + UART011_IMSC);
106}
107
David Howells7d12e782006-10-05 14:55:46 +0100108static void pl011_rx_chars(struct uart_amba_port *uap)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700109{
Takashi Iwaia88487c2008-07-16 21:54:42 +0100110 struct tty_struct *tty = uap->port.info->port.tty;
Russell Kingb63d4f02005-11-19 11:10:35 +0000111 unsigned int status, ch, flag, max_count = 256;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700112
113 status = readw(uap->port.membase + UART01x_FR);
114 while ((status & UART01x_FR_RXFE) == 0 && max_count--) {
Russell Kingb63d4f02005-11-19 11:10:35 +0000115 ch = readw(uap->port.membase + UART01x_DR) | UART_DUMMY_DR_RX;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700116 flag = TTY_NORMAL;
117 uap->port.icount.rx++;
118
119 /*
120 * Note that the error handling code is
121 * out of the main execution path
122 */
Russell Kingb63d4f02005-11-19 11:10:35 +0000123 if (unlikely(ch & UART_DR_ERROR)) {
124 if (ch & UART011_DR_BE) {
125 ch &= ~(UART011_DR_FE | UART011_DR_PE);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700126 uap->port.icount.brk++;
127 if (uart_handle_break(&uap->port))
128 goto ignore_char;
Russell Kingb63d4f02005-11-19 11:10:35 +0000129 } else if (ch & UART011_DR_PE)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700130 uap->port.icount.parity++;
Russell Kingb63d4f02005-11-19 11:10:35 +0000131 else if (ch & UART011_DR_FE)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700132 uap->port.icount.frame++;
Russell Kingb63d4f02005-11-19 11:10:35 +0000133 if (ch & UART011_DR_OE)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700134 uap->port.icount.overrun++;
135
Russell Kingb63d4f02005-11-19 11:10:35 +0000136 ch &= uap->port.read_status_mask;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700137
Russell Kingb63d4f02005-11-19 11:10:35 +0000138 if (ch & UART011_DR_BE)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700139 flag = TTY_BREAK;
Russell Kingb63d4f02005-11-19 11:10:35 +0000140 else if (ch & UART011_DR_PE)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700141 flag = TTY_PARITY;
Russell Kingb63d4f02005-11-19 11:10:35 +0000142 else if (ch & UART011_DR_FE)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700143 flag = TTY_FRAME;
144 }
145
David Howells7d12e782006-10-05 14:55:46 +0100146 if (uart_handle_sysrq_char(&uap->port, ch & 255))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700147 goto ignore_char;
148
Russell Kingb63d4f02005-11-19 11:10:35 +0000149 uart_insert_char(&uap->port, ch, UART011_DR_OE, ch, flag);
Russell King05ab3012005-05-09 23:21:59 +0100150
Linus Torvalds1da177e2005-04-16 15:20:36 -0700151 ignore_char:
152 status = readw(uap->port.membase + UART01x_FR);
153 }
Thomas Gleixner2389b272007-05-29 21:53:50 +0100154 spin_unlock(&uap->port.lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700155 tty_flip_buffer_push(tty);
Thomas Gleixner2389b272007-05-29 21:53:50 +0100156 spin_lock(&uap->port.lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700157}
158
159static void pl011_tx_chars(struct uart_amba_port *uap)
160{
161 struct circ_buf *xmit = &uap->port.info->xmit;
162 int count;
163
164 if (uap->port.x_char) {
165 writew(uap->port.x_char, uap->port.membase + UART01x_DR);
166 uap->port.icount.tx++;
167 uap->port.x_char = 0;
168 return;
169 }
170 if (uart_circ_empty(xmit) || uart_tx_stopped(&uap->port)) {
Russell Kingb129a8c2005-08-31 10:12:14 +0100171 pl011_stop_tx(&uap->port);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700172 return;
173 }
174
175 count = uap->port.fifosize >> 1;
176 do {
177 writew(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
178 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
179 uap->port.icount.tx++;
180 if (uart_circ_empty(xmit))
181 break;
182 } while (--count > 0);
183
184 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
185 uart_write_wakeup(&uap->port);
186
187 if (uart_circ_empty(xmit))
Russell Kingb129a8c2005-08-31 10:12:14 +0100188 pl011_stop_tx(&uap->port);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700189}
190
191static void pl011_modem_status(struct uart_amba_port *uap)
192{
193 unsigned int status, delta;
194
195 status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
196
197 delta = status ^ uap->old_status;
198 uap->old_status = status;
199
200 if (!delta)
201 return;
202
203 if (delta & UART01x_FR_DCD)
204 uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD);
205
206 if (delta & UART01x_FR_DSR)
207 uap->port.icount.dsr++;
208
209 if (delta & UART01x_FR_CTS)
210 uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS);
211
212 wake_up_interruptible(&uap->port.info->delta_msr_wait);
213}
214
David Howells7d12e782006-10-05 14:55:46 +0100215static irqreturn_t pl011_int(int irq, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700216{
217 struct uart_amba_port *uap = dev_id;
218 unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT;
219 int handled = 0;
220
221 spin_lock(&uap->port.lock);
222
223 status = readw(uap->port.membase + UART011_MIS);
224 if (status) {
225 do {
226 writew(status & ~(UART011_TXIS|UART011_RTIS|
227 UART011_RXIS),
228 uap->port.membase + UART011_ICR);
229
230 if (status & (UART011_RTIS|UART011_RXIS))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700231 pl011_rx_chars(uap);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700232 if (status & (UART011_DSRMIS|UART011_DCDMIS|
233 UART011_CTSMIS|UART011_RIMIS))
234 pl011_modem_status(uap);
235 if (status & UART011_TXIS)
236 pl011_tx_chars(uap);
237
238 if (pass_counter-- == 0)
239 break;
240
241 status = readw(uap->port.membase + UART011_MIS);
242 } while (status != 0);
243 handled = 1;
244 }
245
246 spin_unlock(&uap->port.lock);
247
248 return IRQ_RETVAL(handled);
249}
250
251static unsigned int pl01x_tx_empty(struct uart_port *port)
252{
253 struct uart_amba_port *uap = (struct uart_amba_port *)port;
254 unsigned int status = readw(uap->port.membase + UART01x_FR);
255 return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT;
256}
257
258static unsigned int pl01x_get_mctrl(struct uart_port *port)
259{
260 struct uart_amba_port *uap = (struct uart_amba_port *)port;
261 unsigned int result = 0;
262 unsigned int status = readw(uap->port.membase + UART01x_FR);
263
Jiri Slaby5159f402007-10-18 23:40:31 -0700264#define TIOCMBIT(uartbit, tiocmbit) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700265 if (status & uartbit) \
266 result |= tiocmbit
267
Jiri Slaby5159f402007-10-18 23:40:31 -0700268 TIOCMBIT(UART01x_FR_DCD, TIOCM_CAR);
269 TIOCMBIT(UART01x_FR_DSR, TIOCM_DSR);
270 TIOCMBIT(UART01x_FR_CTS, TIOCM_CTS);
271 TIOCMBIT(UART011_FR_RI, TIOCM_RNG);
272#undef TIOCMBIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700273 return result;
274}
275
276static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl)
277{
278 struct uart_amba_port *uap = (struct uart_amba_port *)port;
279 unsigned int cr;
280
281 cr = readw(uap->port.membase + UART011_CR);
282
Jiri Slaby5159f402007-10-18 23:40:31 -0700283#define TIOCMBIT(tiocmbit, uartbit) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700284 if (mctrl & tiocmbit) \
285 cr |= uartbit; \
286 else \
287 cr &= ~uartbit
288
Jiri Slaby5159f402007-10-18 23:40:31 -0700289 TIOCMBIT(TIOCM_RTS, UART011_CR_RTS);
290 TIOCMBIT(TIOCM_DTR, UART011_CR_DTR);
291 TIOCMBIT(TIOCM_OUT1, UART011_CR_OUT1);
292 TIOCMBIT(TIOCM_OUT2, UART011_CR_OUT2);
293 TIOCMBIT(TIOCM_LOOP, UART011_CR_LBE);
294#undef TIOCMBIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700295
296 writew(cr, uap->port.membase + UART011_CR);
297}
298
299static void pl011_break_ctl(struct uart_port *port, int break_state)
300{
301 struct uart_amba_port *uap = (struct uart_amba_port *)port;
302 unsigned long flags;
303 unsigned int lcr_h;
304
305 spin_lock_irqsave(&uap->port.lock, flags);
306 lcr_h = readw(uap->port.membase + UART011_LCRH);
307 if (break_state == -1)
308 lcr_h |= UART01x_LCRH_BRK;
309 else
310 lcr_h &= ~UART01x_LCRH_BRK;
311 writew(lcr_h, uap->port.membase + UART011_LCRH);
312 spin_unlock_irqrestore(&uap->port.lock, flags);
313}
314
Jason Wessel84b5ae12008-02-20 13:33:39 -0600315#ifdef CONFIG_CONSOLE_POLL
316static int pl010_get_poll_char(struct uart_port *port)
317{
318 struct uart_amba_port *uap = (struct uart_amba_port *)port;
319 unsigned int status;
320
321 do {
322 status = readw(uap->port.membase + UART01x_FR);
323 } while (status & UART01x_FR_RXFE);
324
325 return readw(uap->port.membase + UART01x_DR);
326}
327
328static void pl010_put_poll_char(struct uart_port *port,
329 unsigned char ch)
330{
331 struct uart_amba_port *uap = (struct uart_amba_port *)port;
332
333 while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF)
334 barrier();
335
336 writew(ch, uap->port.membase + UART01x_DR);
337}
338
339#endif /* CONFIG_CONSOLE_POLL */
340
Linus Torvalds1da177e2005-04-16 15:20:36 -0700341static int pl011_startup(struct uart_port *port)
342{
343 struct uart_amba_port *uap = (struct uart_amba_port *)port;
344 unsigned int cr;
345 int retval;
346
347 /*
348 * Try to enable the clock producer.
349 */
350 retval = clk_enable(uap->clk);
351 if (retval)
352 goto out;
353
354 uap->port.uartclk = clk_get_rate(uap->clk);
355
356 /*
357 * Allocate the IRQ
358 */
359 retval = request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap);
360 if (retval)
361 goto clk_dis;
362
363 writew(UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
364 uap->port.membase + UART011_IFLS);
365
366 /*
367 * Provoke TX FIFO interrupt into asserting.
368 */
369 cr = UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_LBE;
370 writew(cr, uap->port.membase + UART011_CR);
371 writew(0, uap->port.membase + UART011_FBRD);
372 writew(1, uap->port.membase + UART011_IBRD);
373 writew(0, uap->port.membase + UART011_LCRH);
374 writew(0, uap->port.membase + UART01x_DR);
375 while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY)
376 barrier();
377
378 cr = UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
379 writew(cr, uap->port.membase + UART011_CR);
380
381 /*
382 * initialise the old status of the modem signals
383 */
384 uap->old_status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
385
386 /*
387 * Finally, enable interrupts
388 */
389 spin_lock_irq(&uap->port.lock);
390 uap->im = UART011_RXIM | UART011_RTIM;
391 writew(uap->im, uap->port.membase + UART011_IMSC);
392 spin_unlock_irq(&uap->port.lock);
393
394 return 0;
395
396 clk_dis:
397 clk_disable(uap->clk);
398 out:
399 return retval;
400}
401
402static void pl011_shutdown(struct uart_port *port)
403{
404 struct uart_amba_port *uap = (struct uart_amba_port *)port;
405 unsigned long val;
406
407 /*
408 * disable all interrupts
409 */
410 spin_lock_irq(&uap->port.lock);
411 uap->im = 0;
412 writew(uap->im, uap->port.membase + UART011_IMSC);
413 writew(0xffff, uap->port.membase + UART011_ICR);
414 spin_unlock_irq(&uap->port.lock);
415
416 /*
417 * Free the interrupt
418 */
419 free_irq(uap->port.irq, uap);
420
421 /*
422 * disable the port
423 */
424 writew(UART01x_CR_UARTEN | UART011_CR_TXE, uap->port.membase + UART011_CR);
425
426 /*
427 * disable break condition and fifos
428 */
429 val = readw(uap->port.membase + UART011_LCRH);
430 val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN);
431 writew(val, uap->port.membase + UART011_LCRH);
432
433 /*
434 * Shut down the clock producer
435 */
436 clk_disable(uap->clk);
437}
438
439static void
Alan Cox606d0992006-12-08 02:38:45 -0800440pl011_set_termios(struct uart_port *port, struct ktermios *termios,
441 struct ktermios *old)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700442{
443 unsigned int lcr_h, old_cr;
444 unsigned long flags;
445 unsigned int baud, quot;
446
447 /*
448 * Ask the core to calculate the divisor for us.
449 */
450 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
451 quot = port->uartclk * 4 / baud;
452
453 switch (termios->c_cflag & CSIZE) {
454 case CS5:
455 lcr_h = UART01x_LCRH_WLEN_5;
456 break;
457 case CS6:
458 lcr_h = UART01x_LCRH_WLEN_6;
459 break;
460 case CS7:
461 lcr_h = UART01x_LCRH_WLEN_7;
462 break;
463 default: // CS8
464 lcr_h = UART01x_LCRH_WLEN_8;
465 break;
466 }
467 if (termios->c_cflag & CSTOPB)
468 lcr_h |= UART01x_LCRH_STP2;
469 if (termios->c_cflag & PARENB) {
470 lcr_h |= UART01x_LCRH_PEN;
471 if (!(termios->c_cflag & PARODD))
472 lcr_h |= UART01x_LCRH_EPS;
473 }
474 if (port->fifosize > 1)
475 lcr_h |= UART01x_LCRH_FEN;
476
477 spin_lock_irqsave(&port->lock, flags);
478
479 /*
480 * Update the per-port timeout.
481 */
482 uart_update_timeout(port, termios->c_cflag, baud);
483
Russell Kingb63d4f02005-11-19 11:10:35 +0000484 port->read_status_mask = UART011_DR_OE | 255;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700485 if (termios->c_iflag & INPCK)
Russell Kingb63d4f02005-11-19 11:10:35 +0000486 port->read_status_mask |= UART011_DR_FE | UART011_DR_PE;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700487 if (termios->c_iflag & (BRKINT | PARMRK))
Russell Kingb63d4f02005-11-19 11:10:35 +0000488 port->read_status_mask |= UART011_DR_BE;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700489
490 /*
491 * Characters to ignore
492 */
493 port->ignore_status_mask = 0;
494 if (termios->c_iflag & IGNPAR)
Russell Kingb63d4f02005-11-19 11:10:35 +0000495 port->ignore_status_mask |= UART011_DR_FE | UART011_DR_PE;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700496 if (termios->c_iflag & IGNBRK) {
Russell Kingb63d4f02005-11-19 11:10:35 +0000497 port->ignore_status_mask |= UART011_DR_BE;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700498 /*
499 * If we're ignoring parity and break indicators,
500 * ignore overruns too (for real raw support).
501 */
502 if (termios->c_iflag & IGNPAR)
Russell Kingb63d4f02005-11-19 11:10:35 +0000503 port->ignore_status_mask |= UART011_DR_OE;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700504 }
505
506 /*
507 * Ignore all characters if CREAD is not set.
508 */
509 if ((termios->c_cflag & CREAD) == 0)
Russell Kingb63d4f02005-11-19 11:10:35 +0000510 port->ignore_status_mask |= UART_DUMMY_DR_RX;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700511
512 if (UART_ENABLE_MS(port, termios->c_cflag))
513 pl011_enable_ms(port);
514
515 /* first, disable everything */
516 old_cr = readw(port->membase + UART011_CR);
517 writew(0, port->membase + UART011_CR);
518
519 /* Set baud rate */
520 writew(quot & 0x3f, port->membase + UART011_FBRD);
521 writew(quot >> 6, port->membase + UART011_IBRD);
522
523 /*
524 * ----------v----------v----------v----------v-----
525 * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
526 * ----------^----------^----------^----------^-----
527 */
528 writew(lcr_h, port->membase + UART011_LCRH);
529 writew(old_cr, port->membase + UART011_CR);
530
531 spin_unlock_irqrestore(&port->lock, flags);
532}
533
534static const char *pl011_type(struct uart_port *port)
535{
536 return port->type == PORT_AMBA ? "AMBA/PL011" : NULL;
537}
538
539/*
540 * Release the memory region(s) being used by 'port'
541 */
542static void pl010_release_port(struct uart_port *port)
543{
544 release_mem_region(port->mapbase, SZ_4K);
545}
546
547/*
548 * Request the memory region(s) being used by 'port'
549 */
550static int pl010_request_port(struct uart_port *port)
551{
552 return request_mem_region(port->mapbase, SZ_4K, "uart-pl011")
553 != NULL ? 0 : -EBUSY;
554}
555
556/*
557 * Configure/autoconfigure the port.
558 */
559static void pl010_config_port(struct uart_port *port, int flags)
560{
561 if (flags & UART_CONFIG_TYPE) {
562 port->type = PORT_AMBA;
563 pl010_request_port(port);
564 }
565}
566
567/*
568 * verify the new serial_struct (for TIOCSSERIAL).
569 */
570static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser)
571{
572 int ret = 0;
573 if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA)
574 ret = -EINVAL;
575 if (ser->irq < 0 || ser->irq >= NR_IRQS)
576 ret = -EINVAL;
577 if (ser->baud_base < 9600)
578 ret = -EINVAL;
579 return ret;
580}
581
582static struct uart_ops amba_pl011_pops = {
583 .tx_empty = pl01x_tx_empty,
584 .set_mctrl = pl011_set_mctrl,
585 .get_mctrl = pl01x_get_mctrl,
586 .stop_tx = pl011_stop_tx,
587 .start_tx = pl011_start_tx,
588 .stop_rx = pl011_stop_rx,
589 .enable_ms = pl011_enable_ms,
590 .break_ctl = pl011_break_ctl,
591 .startup = pl011_startup,
592 .shutdown = pl011_shutdown,
593 .set_termios = pl011_set_termios,
594 .type = pl011_type,
595 .release_port = pl010_release_port,
596 .request_port = pl010_request_port,
597 .config_port = pl010_config_port,
598 .verify_port = pl010_verify_port,
Jason Wessel84b5ae12008-02-20 13:33:39 -0600599#ifdef CONFIG_CONSOLE_POLL
600 .poll_get_char = pl010_get_poll_char,
601 .poll_put_char = pl010_put_poll_char,
602#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -0700603};
604
605static struct uart_amba_port *amba_ports[UART_NR];
606
607#ifdef CONFIG_SERIAL_AMBA_PL011_CONSOLE
608
Russell Kingd3587882006-03-20 20:00:09 +0000609static void pl011_console_putchar(struct uart_port *port, int ch)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700610{
Russell Kingd3587882006-03-20 20:00:09 +0000611 struct uart_amba_port *uap = (struct uart_amba_port *)port;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700612
Russell Kingd3587882006-03-20 20:00:09 +0000613 while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF)
614 barrier();
Linus Torvalds1da177e2005-04-16 15:20:36 -0700615 writew(ch, uap->port.membase + UART01x_DR);
616}
617
618static void
619pl011_console_write(struct console *co, const char *s, unsigned int count)
620{
621 struct uart_amba_port *uap = amba_ports[co->index];
622 unsigned int status, old_cr, new_cr;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700623
624 clk_enable(uap->clk);
625
626 /*
627 * First save the CR then disable the interrupts
628 */
629 old_cr = readw(uap->port.membase + UART011_CR);
630 new_cr = old_cr & ~UART011_CR_CTSEN;
631 new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
632 writew(new_cr, uap->port.membase + UART011_CR);
633
Russell Kingd3587882006-03-20 20:00:09 +0000634 uart_console_write(&uap->port, s, count, pl011_console_putchar);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700635
636 /*
637 * Finally, wait for transmitter to become empty
638 * and restore the TCR
639 */
640 do {
641 status = readw(uap->port.membase + UART01x_FR);
642 } while (status & UART01x_FR_BUSY);
643 writew(old_cr, uap->port.membase + UART011_CR);
644
645 clk_disable(uap->clk);
646}
647
648static void __init
649pl011_console_get_options(struct uart_amba_port *uap, int *baud,
650 int *parity, int *bits)
651{
652 if (readw(uap->port.membase + UART011_CR) & UART01x_CR_UARTEN) {
653 unsigned int lcr_h, ibrd, fbrd;
654
655 lcr_h = readw(uap->port.membase + UART011_LCRH);
656
657 *parity = 'n';
658 if (lcr_h & UART01x_LCRH_PEN) {
659 if (lcr_h & UART01x_LCRH_EPS)
660 *parity = 'e';
661 else
662 *parity = 'o';
663 }
664
665 if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7)
666 *bits = 7;
667 else
668 *bits = 8;
669
670 ibrd = readw(uap->port.membase + UART011_IBRD);
671 fbrd = readw(uap->port.membase + UART011_FBRD);
672
673 *baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd);
674 }
675}
676
677static int __init pl011_console_setup(struct console *co, char *options)
678{
679 struct uart_amba_port *uap;
680 int baud = 38400;
681 int bits = 8;
682 int parity = 'n';
683 int flow = 'n';
684
685 /*
686 * Check whether an invalid uart number has been specified, and
687 * if so, search for the first available port that does have
688 * console support.
689 */
690 if (co->index >= UART_NR)
691 co->index = 0;
692 uap = amba_ports[co->index];
Russell Kingd28122a2007-01-22 18:59:42 +0000693 if (!uap)
694 return -ENODEV;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700695
696 uap->port.uartclk = clk_get_rate(uap->clk);
697
698 if (options)
699 uart_parse_options(options, &baud, &parity, &bits, &flow);
700 else
701 pl011_console_get_options(uap, &baud, &parity, &bits);
702
703 return uart_set_options(&uap->port, co, baud, parity, bits, flow);
704}
705
Vincent Sanders2d934862005-09-14 22:36:03 +0100706static struct uart_driver amba_reg;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700707static struct console amba_console = {
708 .name = "ttyAMA",
709 .write = pl011_console_write,
710 .device = uart_console_device,
711 .setup = pl011_console_setup,
712 .flags = CON_PRINTBUFFER,
713 .index = -1,
714 .data = &amba_reg,
715};
716
717#define AMBA_CONSOLE (&amba_console)
718#else
719#define AMBA_CONSOLE NULL
720#endif
721
722static struct uart_driver amba_reg = {
723 .owner = THIS_MODULE,
724 .driver_name = "ttyAMA",
725 .dev_name = "ttyAMA",
726 .major = SERIAL_AMBA_MAJOR,
727 .minor = SERIAL_AMBA_MINOR,
728 .nr = UART_NR,
729 .cons = AMBA_CONSOLE,
730};
731
732static int pl011_probe(struct amba_device *dev, void *id)
733{
734 struct uart_amba_port *uap;
735 void __iomem *base;
736 int i, ret;
737
738 for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
739 if (amba_ports[i] == NULL)
740 break;
741
742 if (i == ARRAY_SIZE(amba_ports)) {
743 ret = -EBUSY;
744 goto out;
745 }
746
Yoann Padioleaudd00cc42007-07-19 01:49:03 -0700747 uap = kzalloc(sizeof(struct uart_amba_port), GFP_KERNEL);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700748 if (uap == NULL) {
749 ret = -ENOMEM;
750 goto out;
751 }
752
753 base = ioremap(dev->res.start, PAGE_SIZE);
754 if (!base) {
755 ret = -ENOMEM;
756 goto free;
757 }
758
Linus Torvalds1da177e2005-04-16 15:20:36 -0700759 uap->clk = clk_get(&dev->dev, "UARTCLK");
760 if (IS_ERR(uap->clk)) {
761 ret = PTR_ERR(uap->clk);
762 goto unmap;
763 }
764
Linus Torvalds1da177e2005-04-16 15:20:36 -0700765 uap->port.dev = &dev->dev;
766 uap->port.mapbase = dev->res.start;
767 uap->port.membase = base;
768 uap->port.iotype = UPIO_MEM;
769 uap->port.irq = dev->irq[0];
770 uap->port.fifosize = 16;
771 uap->port.ops = &amba_pl011_pops;
772 uap->port.flags = UPF_BOOT_AUTOCONF;
773 uap->port.line = i;
774
775 amba_ports[i] = uap;
776
777 amba_set_drvdata(dev, uap);
778 ret = uart_add_one_port(&amba_reg, &uap->port);
779 if (ret) {
780 amba_set_drvdata(dev, NULL);
781 amba_ports[i] = NULL;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700782 clk_put(uap->clk);
783 unmap:
784 iounmap(base);
785 free:
786 kfree(uap);
787 }
788 out:
789 return ret;
790}
791
792static int pl011_remove(struct amba_device *dev)
793{
794 struct uart_amba_port *uap = amba_get_drvdata(dev);
795 int i;
796
797 amba_set_drvdata(dev, NULL);
798
799 uart_remove_one_port(&amba_reg, &uap->port);
800
801 for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
802 if (amba_ports[i] == uap)
803 amba_ports[i] = NULL;
804
805 iounmap(uap->port.membase);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700806 clk_put(uap->clk);
807 kfree(uap);
808 return 0;
809}
810
811static struct amba_id pl011_ids[] __initdata = {
812 {
813 .id = 0x00041011,
814 .mask = 0x000fffff,
815 },
816 { 0, 0 },
817};
818
819static struct amba_driver pl011_driver = {
820 .drv = {
821 .name = "uart-pl011",
822 },
823 .id_table = pl011_ids,
824 .probe = pl011_probe,
825 .remove = pl011_remove,
826};
827
828static int __init pl011_init(void)
829{
830 int ret;
831 printk(KERN_INFO "Serial: AMBA PL011 UART driver\n");
832
833 ret = uart_register_driver(&amba_reg);
834 if (ret == 0) {
835 ret = amba_driver_register(&pl011_driver);
836 if (ret)
837 uart_unregister_driver(&amba_reg);
838 }
839 return ret;
840}
841
842static void __exit pl011_exit(void)
843{
844 amba_driver_unregister(&pl011_driver);
845 uart_unregister_driver(&amba_reg);
846}
847
848module_init(pl011_init);
849module_exit(pl011_exit);
850
851MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd");
852MODULE_DESCRIPTION("ARM AMBA serial port driver");
853MODULE_LICENSE("GPL");