blob: e04169e8e3f86be4a9460cd53589b2a49c241c70 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
Uwe Zeisbergerf30c2262006-10-03 23:01:26 +02002 * sound/oss/trix.c
Linus Torvalds1da177e2005-04-16 15:20:36 -07003 *
4 * Low level driver for the MediaTrix AudioTrix Pro
5 * (MT-0002-PC Control Chip)
6 *
7 *
8 * Copyright (C) by Hannu Savolainen 1993-1997
9 *
10 * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
11 * Version 2 (June 1991). See the "COPYING" file distributed with this software
12 * for more info.
13 *
14 * Changes
15 * Alan Cox Modularisation, cleanup.
16 * Christoph Hellwig Adapted to module_init/module_exit
17 * Arnaldo C. de Melo Got rid of attach_uart401
18 */
19
20#include <linux/init.h>
21#include <linux/module.h>
22
23#include "sound_config.h"
24#include "sb.h"
25#include "sound_firmware.h"
26
27#include "ad1848.h"
28#include "mpu401.h"
29
30#include "trix_boot.h"
31
32static int mpu;
33
34static int joystick;
35
36static unsigned char trix_read(int addr)
37{
38 outb(((unsigned char) addr), 0x390); /* MT-0002-PC ASIC address */
39 return inb(0x391); /* MT-0002-PC ASIC data */
40}
41
42static void trix_write(int addr, int data)
43{
44 outb(((unsigned char) addr), 0x390); /* MT-0002-PC ASIC address */
45 outb(((unsigned char) data), 0x391); /* MT-0002-PC ASIC data */
46}
47
48static void download_boot(int base)
49{
50 int i = 0, n = trix_boot_len;
51
52 if (trix_boot_len == 0)
53 return;
54
55 trix_write(0xf8, 0x00); /* ??????? */
56 outb((0x01), base + 6); /* Clear the internal data pointer */
57 outb((0x00), base + 6); /* Restart */
58
59 /*
60 * Write the boot code to the RAM upload/download register.
61 * Each write increments the internal data pointer.
62 */
63 outb((0x01), base + 6); /* Clear the internal data pointer */
64 outb((0x1A), 0x390); /* Select RAM download/upload port */
65
66 for (i = 0; i < n; i++)
67 outb((trix_boot[i]), 0x391);
68 for (i = n; i < 10016; i++) /* Clear up to first 16 bytes of data RAM */
69 outb((0x00), 0x391);
70 outb((0x00), base + 6); /* Reset */
71 outb((0x50), 0x390); /* ?????? */
72
73}
74
75static int trix_set_wss_port(struct address_info *hw_config)
76{
77 unsigned char addr_bits;
78
79 if (trix_read(0x15) != 0x71) /* No ASIC signature */
80 {
81 MDB(printk(KERN_ERR "No AudioTrix ASIC signature found\n"));
82 return 0;
83 }
84
85 /*
86 * Reset some registers.
87 */
88
89 trix_write(0x13, 0);
90 trix_write(0x14, 0);
91
92 /*
93 * Configure the ASIC to place the codec to the proper I/O location
94 */
95
96 switch (hw_config->io_base)
97 {
98 case 0x530:
99 addr_bits = 0;
100 break;
101 case 0x604:
102 addr_bits = 1;
103 break;
104 case 0xE80:
105 addr_bits = 2;
106 break;
107 case 0xF40:
108 addr_bits = 3;
109 break;
110 default:
111 return 0;
112 }
113
114 trix_write(0x19, (trix_read(0x19) & 0x03) | addr_bits);
115 return 1;
116}
117
118/*
119 * Probe and attach routines for the Windows Sound System mode of
120 * AudioTrix Pro
121 */
122
123static int __init init_trix_wss(struct address_info *hw_config)
124{
125 static unsigned char dma_bits[4] = {
126 1, 2, 0, 3
127 };
128 struct resource *ports;
129 int config_port = hw_config->io_base + 0;
130 int dma1 = hw_config->dma, dma2 = hw_config->dma2;
131 int old_num_mixers = num_mixers;
132 u8 config, bits;
133 int ret;
134
135 switch(hw_config->irq) {
136 case 7:
137 bits = 8;
138 break;
139 case 9:
140 bits = 0x10;
141 break;
142 case 10:
143 bits = 0x18;
144 break;
145 case 11:
146 bits = 0x20;
147 break;
148 default:
149 printk(KERN_ERR "AudioTrix: Bad WSS IRQ %d\n", hw_config->irq);
150 return 0;
151 }
152
153 switch (dma1) {
154 case 0:
155 case 1:
156 case 3:
157 break;
158 default:
159 printk(KERN_ERR "AudioTrix: Bad WSS DMA %d\n", dma1);
160 return 0;
161 }
162
163 switch (dma2) {
164 case -1:
165 case 0:
166 case 1:
167 case 3:
168 break;
169 default:
170 printk(KERN_ERR "AudioTrix: Bad capture DMA %d\n", dma2);
171 return 0;
172 }
173
174 /*
175 * Check if the IO port returns valid signature. The original MS Sound
176 * system returns 0x04 while some cards (AudioTrix Pro for example)
177 * return 0x00.
178 */
179 ports = request_region(hw_config->io_base + 4, 4, "ad1848");
180 if (!ports) {
181 printk(KERN_ERR "AudioTrix: MSS I/O port conflict (%x)\n", hw_config->io_base);
182 return 0;
183 }
184
185 if (!request_region(hw_config->io_base, 4, "MSS config")) {
186 printk(KERN_ERR "AudioTrix: MSS I/O port conflict (%x)\n", hw_config->io_base);
187 release_region(hw_config->io_base + 4, 4);
188 return 0;
189 }
190
191 if (!trix_set_wss_port(hw_config))
192 goto fail;
193
194 config = inb(hw_config->io_base + 3);
195
196 if ((config & 0x3f) != 0x00)
197 {
198 MDB(printk(KERN_ERR "No MSS signature detected on port 0x%x\n", hw_config->io_base));
199 goto fail;
200 }
201
202 /*
203 * Check that DMA0 is not in use with a 8 bit board.
204 */
205
206 if (dma1 == 0 && config & 0x80)
207 {
208 printk(KERN_ERR "AudioTrix: Can't use DMA0 with a 8 bit card slot\n");
209 goto fail;
210 }
211 if (hw_config->irq > 9 && config & 0x80)
212 {
213 printk(KERN_ERR "AudioTrix: Can't use IRQ%d with a 8 bit card slot\n", hw_config->irq);
214 goto fail;
215 }
216
217 ret = ad1848_detect(ports, NULL, hw_config->osp);
218 if (!ret)
219 goto fail;
220
221 if (joystick==1)
222 trix_write(0x15, 0x80);
223
224 /*
225 * Set the IRQ and DMA addresses.
226 */
227
228 outb((bits | 0x40), config_port);
229
230 if (dma2 == -1 || dma2 == dma1)
231 {
232 bits |= dma_bits[dma1];
233 dma2 = dma1;
234 }
235 else
236 {
237 unsigned char tmp;
238
239 tmp = trix_read(0x13) & ~30;
240 trix_write(0x13, tmp | 0x80 | (dma1 << 4));
241
242 tmp = trix_read(0x14) & ~30;
243 trix_write(0x14, tmp | 0x80 | (dma2 << 4));
244 }
245
246 outb((bits), config_port); /* Write IRQ+DMA setup */
247
248 hw_config->slots[0] = ad1848_init("AudioTrix Pro", ports,
249 hw_config->irq,
250 dma1,
251 dma2,
252 0,
253 hw_config->osp,
254 THIS_MODULE);
255
256 if (num_mixers > old_num_mixers) /* Mixer got installed */
257 {
258 AD1848_REROUTE(SOUND_MIXER_LINE1, SOUND_MIXER_LINE); /* Line in */
259 AD1848_REROUTE(SOUND_MIXER_LINE2, SOUND_MIXER_CD);
260 AD1848_REROUTE(SOUND_MIXER_LINE3, SOUND_MIXER_SYNTH); /* OPL4 */
261 AD1848_REROUTE(SOUND_MIXER_SPEAKER, SOUND_MIXER_ALTPCM); /* SB */
262 }
263 return 1;
264
265fail:
266 release_region(hw_config->io_base, 4);
267 release_region(hw_config->io_base + 4, 4);
268 return 0;
269}
270
271static int __init probe_trix_sb(struct address_info *hw_config)
272{
273
274 int tmp;
275 unsigned char conf;
276 extern int sb_be_quiet;
277 int old_quiet;
278 static signed char irq_translate[] = {
279 -1, -1, -1, 0, 1, 2, -1, 3
280 };
281
282 if (trix_boot_len == 0)
283 return 0; /* No boot code -> no fun */
284
285 if ((hw_config->io_base & 0xffffff8f) != 0x200)
286 return 0;
287
288 tmp = hw_config->irq;
289 if (tmp > 7)
290 return 0;
291 if (irq_translate[tmp] == -1)
292 return 0;
293
294 tmp = hw_config->dma;
295 if (tmp != 1 && tmp != 3)
296 return 0;
297
298 if (!request_region(hw_config->io_base, 16, "soundblaster")) {
299 printk(KERN_ERR "AudioTrix: SB I/O port conflict (%x)\n", hw_config->io_base);
300 return 0;
301 }
302
303 conf = 0x84; /* DMA and IRQ enable */
304 conf |= hw_config->io_base & 0x70; /* I/O address bits */
305 conf |= irq_translate[hw_config->irq];
306 if (hw_config->dma == 3)
307 conf |= 0x08;
308 trix_write(0x1b, conf);
309
310 download_boot(hw_config->io_base);
311
312 hw_config->name = "AudioTrix SB";
313 if (!sb_dsp_detect(hw_config, 0, 0, NULL)) {
314 release_region(hw_config->io_base, 16);
315 return 0;
316 }
317
318 hw_config->driver_use_1 = SB_NO_MIDI | SB_NO_MIXER | SB_NO_RECORDING;
319
320 /* Prevent false alarms */
321 old_quiet = sb_be_quiet;
322 sb_be_quiet = 1;
323
324 sb_dsp_init(hw_config, THIS_MODULE);
325
326 sb_be_quiet = old_quiet;
327 return 1;
328}
329
330static int __init probe_trix_mpu(struct address_info *hw_config)
331{
332 unsigned char conf;
333 static int irq_bits[] = {
334 -1, -1, -1, 1, 2, 3, -1, 4, -1, 5
335 };
336
337 if (hw_config->irq > 9)
338 {
339 printk(KERN_ERR "AudioTrix: Bad MPU IRQ %d\n", hw_config->irq);
340 return 0;
341 }
342 if (irq_bits[hw_config->irq] == -1)
343 {
344 printk(KERN_ERR "AudioTrix: Bad MPU IRQ %d\n", hw_config->irq);
345 return 0;
346 }
347 switch (hw_config->io_base)
348 {
349 case 0x330:
350 conf = 0x00;
351 break;
352 case 0x370:
353 conf = 0x04;
354 break;
355 case 0x3b0:
356 conf = 0x08;
357 break;
358 case 0x3f0:
359 conf = 0x0c;
360 break;
361 default:
362 return 0; /* Invalid port */
363 }
364
365 conf |= irq_bits[hw_config->irq] << 4;
366 trix_write(0x19, (trix_read(0x19) & 0x83) | conf);
367 hw_config->name = "AudioTrix Pro";
368 return probe_uart401(hw_config, THIS_MODULE);
369}
370
371static void __exit unload_trix_wss(struct address_info *hw_config)
372{
373 int dma2 = hw_config->dma2;
374
375 if (dma2 == -1)
376 dma2 = hw_config->dma;
377
378 release_region(0x390, 2);
379 release_region(hw_config->io_base, 4);
380
381 ad1848_unload(hw_config->io_base + 4,
382 hw_config->irq,
383 hw_config->dma,
384 dma2,
385 0);
386 sound_unload_audiodev(hw_config->slots[0]);
387}
388
389static inline void __exit unload_trix_mpu(struct address_info *hw_config)
390{
391 unload_uart401(hw_config);
392}
393
394static inline void __exit unload_trix_sb(struct address_info *hw_config)
395{
396 sb_dsp_unload(hw_config, mpu);
397}
398
399static struct address_info cfg;
400static struct address_info cfg2;
401static struct address_info cfg_mpu;
402
403static int sb;
404static int fw_load;
405
406static int __initdata io = -1;
407static int __initdata irq = -1;
408static int __initdata dma = -1;
409static int __initdata dma2 = -1; /* Set this for modules that need it */
410static int __initdata sb_io = -1;
411static int __initdata sb_dma = -1;
412static int __initdata sb_irq = -1;
413static int __initdata mpu_io = -1;
414static int __initdata mpu_irq = -1;
415
416module_param(io, int, 0);
417module_param(irq, int, 0);
418module_param(dma, int, 0);
419module_param(dma2, int, 0);
420module_param(sb_io, int, 0);
421module_param(sb_dma, int, 0);
422module_param(sb_irq, int, 0);
423module_param(mpu_io, int, 0);
424module_param(mpu_irq, int, 0);
425module_param(joystick, bool, 0);
426
427static int __init init_trix(void)
428{
429 printk(KERN_INFO "MediaTrix audio driver Copyright (C) by Hannu Savolainen 1993-1996\n");
430
431 cfg.io_base = io;
432 cfg.irq = irq;
433 cfg.dma = dma;
434 cfg.dma2 = dma2;
435
436 cfg2.io_base = sb_io;
437 cfg2.irq = sb_irq;
438 cfg2.dma = sb_dma;
439
440 cfg_mpu.io_base = mpu_io;
441 cfg_mpu.irq = mpu_irq;
442
443 if (cfg.io_base == -1 || cfg.dma == -1 || cfg.irq == -1) {
444 printk(KERN_INFO "I/O, IRQ, DMA and type are mandatory\n");
445 return -EINVAL;
446 }
447
448 if (cfg2.io_base != -1 && (cfg2.irq == -1 || cfg2.dma == -1)) {
449 printk(KERN_INFO "CONFIG_SB_IRQ and CONFIG_SB_DMA must be specified if SB_IO is set.\n");
450 return -EINVAL;
451 }
452 if (cfg_mpu.io_base != -1 && cfg_mpu.irq == -1) {
453 printk(KERN_INFO "CONFIG_MPU_IRQ must be specified if MPU_IO is set.\n");
454 return -EINVAL;
455 }
456 if (!trix_boot)
457 {
458 fw_load = 1;
459 trix_boot_len = mod_firmware_load("/etc/sound/trxpro.bin",
460 (char **) &trix_boot);
461 }
462
463 if (!request_region(0x390, 2, "AudioTrix")) {
464 printk(KERN_ERR "AudioTrix: Config port I/O conflict\n");
465 return -ENODEV;
466 }
467
468 if (!init_trix_wss(&cfg)) {
469 release_region(0x390, 2);
470 return -ENODEV;
471 }
472
473 /*
474 * We must attach in the right order to get the firmware
475 * loaded up in time.
476 */
477
478 if (cfg2.io_base != -1) {
479 sb = probe_trix_sb(&cfg2);
480 }
481
482 if (cfg_mpu.io_base != -1)
483 mpu = probe_trix_mpu(&cfg_mpu);
484
485 return 0;
486}
487
488static void __exit cleanup_trix(void)
489{
490 if (fw_load && trix_boot)
491 vfree(trix_boot);
492 if (sb)
493 unload_trix_sb(&cfg2);
494 if (mpu)
495 unload_trix_mpu(&cfg_mpu);
496 unload_trix_wss(&cfg);
497}
498
499module_init(init_trix);
500module_exit(cleanup_trix);
501
502#ifndef MODULE
503static int __init setup_trix (char *str)
504{
505 /* io, irq, dma, dma2, sb_io, sb_irq, sb_dma, mpu_io, mpu_irq */
506 int ints[9];
507
508 str = get_options(str, ARRAY_SIZE(ints), ints);
509
510 io = ints[1];
511 irq = ints[2];
512 dma = ints[3];
513 dma2 = ints[4];
514 sb_io = ints[5];
515 sb_irq = ints[6];
516 sb_dma = ints[6];
517 mpu_io = ints[7];
518 mpu_irq = ints[8];
519
520 return 1;
521}
522
523__setup("trix=", setup_trix);
524#endif
525MODULE_LICENSE("GPL");