blob: ba441ad9a007fc374d146d58eee391c836b2b9c4 [file] [log] [blame]
Thomas Langer6cd3c7e2012-05-20 15:46:19 +02001/*
2 * This program is free software; you can redistribute it and/or modify it
3 * under the terms of the GNU General Public License version 2 as published
4 * by the Free Software Foundation.
5 *
6 * Copyright (C) 2012 Thomas Langer <thomas.langer@lantiq.com>
7 */
8
9#include <linux/module.h>
10#include <linux/device.h>
11#include <linux/platform_device.h>
12#include <linux/spi/spi.h>
13#include <linux/delay.h>
Thomas Langer6cd3c7e2012-05-20 15:46:19 +020014#include <linux/of.h>
15#include <linux/of_platform.h>
16
17#include <lantiq_soc.h>
18
19#define DRV_NAME "sflash-falcon"
20
21#define FALCON_SPI_XFER_BEGIN (1 << 0)
22#define FALCON_SPI_XFER_END (1 << 1)
23
24/* Bus Read Configuration Register0 */
25#define BUSRCON0 0x00000010
26/* Bus Write Configuration Register0 */
27#define BUSWCON0 0x00000018
28/* Serial Flash Configuration Register */
29#define SFCON 0x00000080
30/* Serial Flash Time Register */
31#define SFTIME 0x00000084
32/* Serial Flash Status Register */
33#define SFSTAT 0x00000088
34/* Serial Flash Command Register */
35#define SFCMD 0x0000008C
36/* Serial Flash Address Register */
37#define SFADDR 0x00000090
38/* Serial Flash Data Register */
39#define SFDATA 0x00000094
40/* Serial Flash I/O Control Register */
41#define SFIO 0x00000098
42/* EBU Clock Control Register */
43#define EBUCC 0x000000C4
44
45/* Dummy Phase Length */
46#define SFCMD_DUMLEN_OFFSET 16
47#define SFCMD_DUMLEN_MASK 0x000F0000
48/* Chip Select */
49#define SFCMD_CS_OFFSET 24
50#define SFCMD_CS_MASK 0x07000000
51/* field offset */
52#define SFCMD_ALEN_OFFSET 20
53#define SFCMD_ALEN_MASK 0x00700000
54/* SCK Rise-edge Position */
55#define SFTIME_SCKR_POS_OFFSET 8
56#define SFTIME_SCKR_POS_MASK 0x00000F00
57/* SCK Period */
58#define SFTIME_SCK_PER_OFFSET 0
59#define SFTIME_SCK_PER_MASK 0x0000000F
60/* SCK Fall-edge Position */
61#define SFTIME_SCKF_POS_OFFSET 12
62#define SFTIME_SCKF_POS_MASK 0x0000F000
63/* Device Size */
64#define SFCON_DEV_SIZE_A23_0 0x03000000
65#define SFCON_DEV_SIZE_MASK 0x0F000000
66/* Read Data Position */
67#define SFTIME_RD_POS_MASK 0x000F0000
68/* Data Output */
69#define SFIO_UNUSED_WD_MASK 0x0000000F
70/* Command Opcode mask */
71#define SFCMD_OPC_MASK 0x000000FF
72/* dlen bytes of data to write */
73#define SFCMD_DIR_WRITE 0x00000100
74/* Data Length offset */
75#define SFCMD_DLEN_OFFSET 9
76/* Command Error */
77#define SFSTAT_CMD_ERR 0x20000000
78/* Access Command Pending */
79#define SFSTAT_CMD_PEND 0x00400000
80/* Frequency set to 100MHz. */
81#define EBUCC_EBUDIV_SELF100 0x00000001
82/* Serial Flash */
83#define BUSRCON0_AGEN_SERIAL_FLASH 0xF0000000
84/* 8-bit multiplexed */
85#define BUSRCON0_PORTW_8_BIT_MUX 0x00000000
86/* Serial Flash */
87#define BUSWCON0_AGEN_SERIAL_FLASH 0xF0000000
88/* Chip Select after opcode */
89#define SFCMD_KEEP_CS_KEEP_SELECTED 0x00008000
90
91#define CLOCK_100M 100000000
92#define CLOCK_50M 50000000
93
94struct falcon_sflash {
95 u32 sfcmd; /* for caching of opcode, direction, ... */
96 struct spi_master *master;
97};
98
99int falcon_sflash_xfer(struct spi_device *spi, struct spi_transfer *t,
100 unsigned long flags)
101{
102 struct device *dev = &spi->dev;
103 struct falcon_sflash *priv = spi_master_get_devdata(spi->master);
104 const u8 *txp = t->tx_buf;
105 u8 *rxp = t->rx_buf;
106 unsigned int bytelen = ((8 * t->len + 7) / 8);
107 unsigned int len, alen, dumlen;
108 u32 val;
109 enum {
110 state_init,
111 state_command_prepare,
112 state_write,
113 state_read,
114 state_disable_cs,
115 state_end
116 } state = state_init;
117
118 do {
119 switch (state) {
120 case state_init: /* detect phase of upper layer sequence */
121 {
122 /* initial write ? */
123 if (flags & FALCON_SPI_XFER_BEGIN) {
124 if (!txp) {
125 dev_err(dev,
126 "BEGIN without tx data!\n");
127 return -ENODATA;
128 }
129 /*
130 * Prepare the parts of the sfcmd register,
131 * which should not change during a sequence!
132 * Only exception are the length fields,
133 * especially alen and dumlen.
134 */
135
136 priv->sfcmd = ((spi->chip_select
137 << SFCMD_CS_OFFSET)
138 & SFCMD_CS_MASK);
139 priv->sfcmd |= SFCMD_KEEP_CS_KEEP_SELECTED;
140 priv->sfcmd |= *txp;
141 txp++;
142 bytelen--;
143 if (bytelen) {
144 /*
145 * more data:
146 * maybe address and/or dummy
147 */
148 state = state_command_prepare;
149 break;
150 } else {
151 dev_dbg(dev, "write cmd %02X\n",
152 priv->sfcmd & SFCMD_OPC_MASK);
153 }
154 }
155 /* continued write ? */
156 if (txp && bytelen) {
157 state = state_write;
158 break;
159 }
160 /* read data? */
161 if (rxp && bytelen) {
162 state = state_read;
163 break;
164 }
165 /* end of sequence? */
166 if (flags & FALCON_SPI_XFER_END)
167 state = state_disable_cs;
168 else
169 state = state_end;
170 break;
171 }
172 /* collect tx data for address and dummy phase */
173 case state_command_prepare:
174 {
175 /* txp is valid, already checked */
176 val = 0;
177 alen = 0;
178 dumlen = 0;
179 while (bytelen > 0) {
180 if (alen < 3) {
181 val = (val << 8) | (*txp++);
182 alen++;
183 } else if ((dumlen < 15) && (*txp == 0)) {
184 /*
185 * assume dummy bytes are set to 0
186 * from upper layer
187 */
188 dumlen++;
189 txp++;
190 } else {
191 break;
192 }
193 bytelen--;
194 }
195 priv->sfcmd &= ~(SFCMD_ALEN_MASK | SFCMD_DUMLEN_MASK);
196 priv->sfcmd |= (alen << SFCMD_ALEN_OFFSET) |
197 (dumlen << SFCMD_DUMLEN_OFFSET);
198 if (alen > 0)
199 ltq_ebu_w32(val, SFADDR);
200
201 dev_dbg(dev, "wr %02X, alen=%d (addr=%06X) dlen=%d\n",
202 priv->sfcmd & SFCMD_OPC_MASK,
203 alen, val, dumlen);
204
205 if (bytelen > 0) {
206 /* continue with write */
207 state = state_write;
208 } else if (flags & FALCON_SPI_XFER_END) {
209 /* end of sequence? */
210 state = state_disable_cs;
211 } else {
212 /*
213 * go to end and expect another
214 * call (read or write)
215 */
216 state = state_end;
217 }
218 break;
219 }
220 case state_write:
221 {
222 /* txp still valid */
223 priv->sfcmd |= SFCMD_DIR_WRITE;
224 len = 0;
225 val = 0;
226 do {
227 if (bytelen--)
228 val |= (*txp++) << (8 * len++);
229 if ((flags & FALCON_SPI_XFER_END)
230 && (bytelen == 0)) {
231 priv->sfcmd &=
232 ~SFCMD_KEEP_CS_KEEP_SELECTED;
233 }
234 if ((len == 4) || (bytelen == 0)) {
235 ltq_ebu_w32(val, SFDATA);
236 ltq_ebu_w32(priv->sfcmd
237 | (len<<SFCMD_DLEN_OFFSET),
238 SFCMD);
239 len = 0;
240 val = 0;
241 priv->sfcmd &= ~(SFCMD_ALEN_MASK
242 | SFCMD_DUMLEN_MASK);
243 }
244 } while (bytelen);
245 state = state_end;
246 break;
247 }
248 case state_read:
249 {
250 /* read data */
251 priv->sfcmd &= ~SFCMD_DIR_WRITE;
252 do {
253 if ((flags & FALCON_SPI_XFER_END)
254 && (bytelen <= 4)) {
255 priv->sfcmd &=
256 ~SFCMD_KEEP_CS_KEEP_SELECTED;
257 }
258 len = (bytelen > 4) ? 4 : bytelen;
259 bytelen -= len;
260 ltq_ebu_w32(priv->sfcmd
261 | (len << SFCMD_DLEN_OFFSET), SFCMD);
262 priv->sfcmd &= ~(SFCMD_ALEN_MASK
263 | SFCMD_DUMLEN_MASK);
264 do {
265 val = ltq_ebu_r32(SFSTAT);
266 if (val & SFSTAT_CMD_ERR) {
267 /* reset error status */
268 dev_err(dev, "SFSTAT: CMD_ERR");
269 dev_err(dev, " (%x)\n", val);
270 ltq_ebu_w32(SFSTAT_CMD_ERR,
271 SFSTAT);
272 return -EBADE;
273 }
274 } while (val & SFSTAT_CMD_PEND);
275 val = ltq_ebu_r32(SFDATA);
276 do {
277 *rxp = (val & 0xFF);
278 rxp++;
279 val >>= 8;
280 len--;
281 } while (len);
282 } while (bytelen);
283 state = state_end;
284 break;
285 }
286 case state_disable_cs:
287 {
288 priv->sfcmd &= ~SFCMD_KEEP_CS_KEEP_SELECTED;
289 ltq_ebu_w32(priv->sfcmd | (0 << SFCMD_DLEN_OFFSET),
290 SFCMD);
291 val = ltq_ebu_r32(SFSTAT);
292 if (val & SFSTAT_CMD_ERR) {
293 /* reset error status */
294 dev_err(dev, "SFSTAT: CMD_ERR (%x)\n", val);
295 ltq_ebu_w32(SFSTAT_CMD_ERR, SFSTAT);
296 return -EBADE;
297 }
298 state = state_end;
299 break;
300 }
301 case state_end:
302 break;
303 }
304 } while (state != state_end);
305
306 return 0;
307}
308
309static int falcon_sflash_setup(struct spi_device *spi)
310{
311 unsigned int i;
312 unsigned long flags;
313
Thomas Langer6cd3c7e2012-05-20 15:46:19 +0200314 spin_lock_irqsave(&ebu_lock, flags);
315
316 if (spi->max_speed_hz >= CLOCK_100M) {
317 /* set EBU clock to 100 MHz */
318 ltq_sys1_w32_mask(0, EBUCC_EBUDIV_SELF100, EBUCC);
319 i = 1; /* divider */
320 } else {
321 /* set EBU clock to 50 MHz */
322 ltq_sys1_w32_mask(EBUCC_EBUDIV_SELF100, 0, EBUCC);
323
324 /* search for suitable divider */
325 for (i = 1; i < 7; i++) {
326 if (CLOCK_50M / i <= spi->max_speed_hz)
327 break;
328 }
329 }
330
331 /* setup period of serial clock */
332 ltq_ebu_w32_mask(SFTIME_SCKF_POS_MASK
333 | SFTIME_SCKR_POS_MASK
334 | SFTIME_SCK_PER_MASK,
335 (i << SFTIME_SCKR_POS_OFFSET)
336 | (i << (SFTIME_SCK_PER_OFFSET + 1)),
337 SFTIME);
338
339 /*
340 * set some bits of unused_wd, to not trigger HOLD/WP
341 * signals on non QUAD flashes
342 */
343 ltq_ebu_w32((SFIO_UNUSED_WD_MASK & (0x8 | 0x4)), SFIO);
344
345 ltq_ebu_w32(BUSRCON0_AGEN_SERIAL_FLASH | BUSRCON0_PORTW_8_BIT_MUX,
346 BUSRCON0);
347 ltq_ebu_w32(BUSWCON0_AGEN_SERIAL_FLASH, BUSWCON0);
348 /* set address wrap around to maximum for 24-bit addresses */
349 ltq_ebu_w32_mask(SFCON_DEV_SIZE_MASK, SFCON_DEV_SIZE_A23_0, SFCON);
350
351 spin_unlock_irqrestore(&ebu_lock, flags);
352
353 return 0;
354}
355
356static int falcon_sflash_prepare_xfer(struct spi_master *master)
357{
358 return 0;
359}
360
361static int falcon_sflash_unprepare_xfer(struct spi_master *master)
362{
363 return 0;
364}
365
366static int falcon_sflash_xfer_one(struct spi_master *master,
367 struct spi_message *m)
368{
369 struct falcon_sflash *priv = spi_master_get_devdata(master);
370 struct spi_transfer *t;
371 unsigned long spi_flags;
372 unsigned long flags;
373 int ret = 0;
374
375 priv->sfcmd = 0;
376 m->actual_length = 0;
377
378 spi_flags = FALCON_SPI_XFER_BEGIN;
379 list_for_each_entry(t, &m->transfers, transfer_list) {
380 if (list_is_last(&t->transfer_list, &m->transfers))
381 spi_flags |= FALCON_SPI_XFER_END;
382
383 spin_lock_irqsave(&ebu_lock, flags);
384 ret = falcon_sflash_xfer(m->spi, t, spi_flags);
385 spin_unlock_irqrestore(&ebu_lock, flags);
386
387 if (ret)
388 break;
389
390 m->actual_length += t->len;
391
392 WARN_ON(t->delay_usecs || t->cs_change);
393 spi_flags = 0;
394 }
395
396 m->status = ret;
John Crispin737a7c42013-01-30 21:33:30 +0100397 spi_finalize_current_message(master);
Thomas Langer6cd3c7e2012-05-20 15:46:19 +0200398
399 return 0;
400}
401
Grant Likelyfd4a3192012-12-07 16:57:14 +0000402static int falcon_sflash_probe(struct platform_device *pdev)
Thomas Langer6cd3c7e2012-05-20 15:46:19 +0200403{
404 struct falcon_sflash *priv;
405 struct spi_master *master;
406 int ret;
407
408 if (ltq_boot_select() != BS_SPI) {
409 dev_err(&pdev->dev, "invalid bootstrap options\n");
410 return -ENODEV;
411 }
412
413 master = spi_alloc_master(&pdev->dev, sizeof(*priv));
414 if (!master)
415 return -ENOMEM;
416
417 priv = spi_master_get_devdata(master);
418 priv->master = master;
419
420 master->mode_bits = SPI_MODE_3;
John Crispinec3eaec2013-01-30 21:33:31 +0100421 master->flags = SPI_MASTER_HALF_DUPLEX;
Thomas Langer6cd3c7e2012-05-20 15:46:19 +0200422 master->setup = falcon_sflash_setup;
423 master->prepare_transfer_hardware = falcon_sflash_prepare_xfer;
424 master->transfer_one_message = falcon_sflash_xfer_one;
425 master->unprepare_transfer_hardware = falcon_sflash_unprepare_xfer;
426 master->dev.of_node = pdev->dev.of_node;
427
428 platform_set_drvdata(pdev, priv);
429
Jingoo Han999b6e92013-12-04 14:11:56 +0900430 ret = devm_spi_register_master(&pdev->dev, master);
Thomas Langer6cd3c7e2012-05-20 15:46:19 +0200431 if (ret)
432 spi_master_put(master);
433 return ret;
434}
435
Thomas Langer6cd3c7e2012-05-20 15:46:19 +0200436static const struct of_device_id falcon_sflash_match[] = {
437 { .compatible = "lantiq,sflash-falcon" },
438 {},
439};
440MODULE_DEVICE_TABLE(of, falcon_sflash_match);
441
442static struct platform_driver falcon_sflash_driver = {
443 .probe = falcon_sflash_probe,
Thomas Langer6cd3c7e2012-05-20 15:46:19 +0200444 .driver = {
445 .name = DRV_NAME,
446 .owner = THIS_MODULE,
447 .of_match_table = falcon_sflash_match,
448 }
449};
450
451module_platform_driver(falcon_sflash_driver);
452
453MODULE_LICENSE("GPL");
454MODULE_DESCRIPTION("Lantiq Falcon SPI/SFLASH controller driver");