Fabio Estevam | ef0e4a6 | 2012-11-22 17:10:46 -0200 | [diff] [blame] | 1 | * Clock bindings for Freescale i.MX31 |
| 2 | |
| 3 | Required properties: |
| 4 | - compatible: Should be "fsl,imx31-ccm" |
| 5 | - reg: Address and length of the register set |
| 6 | - interrupts: Should contain CCM interrupt |
| 7 | - #clock-cells: Should be <1> |
| 8 | |
| 9 | The clock consumer should specify the desired clock by having the clock |
| 10 | ID in its "clocks" phandle cell. The following is a full list of i.MX31 |
| 11 | clocks and IDs. |
| 12 | |
| 13 | Clock ID |
| 14 | ----------------------- |
| 15 | dummy 0 |
| 16 | ckih 1 |
| 17 | ckil 2 |
| 18 | mpll 3 |
| 19 | spll 4 |
| 20 | upll 5 |
| 21 | mcu_main 6 |
| 22 | hsp 7 |
| 23 | ahb 8 |
| 24 | nfc 9 |
| 25 | ipg 10 |
| 26 | per_div 11 |
| 27 | per 12 |
| 28 | csi_sel 13 |
| 29 | fir_sel 14 |
| 30 | csi_div 15 |
| 31 | usb_div_pre 16 |
| 32 | usb_div_post 17 |
| 33 | fir_div_pre 18 |
| 34 | fir_div_post 19 |
| 35 | sdhc1_gate 20 |
| 36 | sdhc2_gate 21 |
| 37 | gpt_gate 22 |
| 38 | epit1_gate 23 |
| 39 | epit2_gate 24 |
| 40 | iim_gate 25 |
| 41 | ata_gate 26 |
| 42 | sdma_gate 27 |
| 43 | cspi3_gate 28 |
| 44 | rng_gate 29 |
| 45 | uart1_gate 30 |
| 46 | uart2_gate 31 |
| 47 | ssi1_gate 32 |
| 48 | i2c1_gate 33 |
| 49 | i2c2_gate 34 |
| 50 | i2c3_gate 35 |
| 51 | hantro_gate 36 |
| 52 | mstick1_gate 37 |
| 53 | mstick2_gate 38 |
| 54 | csi_gate 39 |
| 55 | rtc_gate 40 |
| 56 | wdog_gate 41 |
| 57 | pwm_gate 42 |
| 58 | sim_gate 43 |
| 59 | ect_gate 44 |
| 60 | usb_gate 45 |
| 61 | kpp_gate 46 |
| 62 | ipu_gate 47 |
| 63 | uart3_gate 48 |
| 64 | uart4_gate 49 |
| 65 | uart5_gate 50 |
| 66 | owire_gate 51 |
| 67 | ssi2_gate 52 |
| 68 | cspi1_gate 53 |
| 69 | cspi2_gate 54 |
| 70 | gacc_gate 55 |
| 71 | emi_gate 56 |
| 72 | rtic_gate 57 |
| 73 | firi_gate 58 |
| 74 | |
| 75 | Examples: |
| 76 | |
| 77 | clks: ccm@53f80000{ |
| 78 | compatible = "fsl,imx31-ccm"; |
| 79 | reg = <0x53f80000 0x4000>; |
| 80 | interrupts = <0 31 0x04 0 53 0x04>; |
| 81 | #clock-cells = <1>; |
| 82 | }; |
| 83 | |
| 84 | uart1: serial@43f90000 { |
| 85 | compatible = "fsl,imx31-uart", "fsl,imx21-uart"; |
| 86 | reg = <0x43f90000 0x4000>; |
| 87 | interrupts = <45>; |
| 88 | clocks = <&clks 10>, <&clks 30>; |
| 89 | clock-names = "ipg", "per"; |
| 90 | status = "disabled"; |
| 91 | }; |