arch/arm/mach-omap2/gpmc-nand.c

/*
 * gpmc-nand.c
 *
 * Copyright (C) 2009 Texas Instruments
 * Vimal Singh <vimalsingh@ti.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/mtd/nand.h>
#include <linux/platform_data/mtd-nand-omap2.h>

#include <asm/mach/flash.h>

#include "gpmc.h"
#include "soc.h"
#include "gpmc-nand.h"

/* minimum size for IO mapping */
#define	NAND_IO_SIZE	4

static struct resource gpmc_nand_resource[] = {
	{
		.flags		= IORESOURCE_MEM,
	},
	{
		.flags		= IORESOURCE_IRQ,
	},
	{
		.flags		= IORESOURCE_IRQ,
	},
};

static struct platform_device gpmc_nand_device = {
	.name		= "omap2-nand",
	.id		= 0,
	.num_resources	= ARRAY_SIZE(gpmc_nand_resource),
	.resource	= gpmc_nand_resource,
};

static int omap2_nand_gpmc_retime(
				struct omap_nand_platform_data *gpmc_nand_data,
				struct gpmc_timings *gpmc_t)
{
	struct gpmc_timings t;
	int err;

	memset(&t, 0, sizeof(t));
	t.sync_clk = gpmc_t->sync_clk;
	t.cs_on = gpmc_t->cs_on;
	t.adv_on = gpmc_t->adv_on;

	/* Read */
	t.adv_rd_off = gpmc_t->adv_rd_off;
	t.oe_on  = t.adv_on;
	t.access = gpmc_t->access;
	t.oe_off = gpmc_t->oe_off;
	t.cs_rd_off = gpmc_t->cs_rd_off;
	t.rd_cycle = gpmc_t->rd_cycle;

	/* Write */
	t.adv_wr_off = gpmc_t->adv_wr_off;
	t.we_on  = t.oe_on;
	if (cpu_is_omap34xx()) {
		t.wr_data_mux_bus = gpmc_t->wr_data_mux_bus;
		t.wr_access = gpmc_t->wr_access;
	}
	t.we_off = gpmc_t->we_off;
	t.cs_wr_off = gpmc_t->cs_wr_off;
	t.wr_cycle = gpmc_t->wr_cycle;

	/* Configure GPMC */
	if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
		gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 1);
	else
		gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 0);
	gpmc_cs_configure(gpmc_nand_data->cs,
			GPMC_CONFIG_DEV_TYPE, GPMC_DEVICETYPE_NAND);
	gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_WP, 0);
	err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t);
	if (err)
		return err;

	return 0;
}

static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
{
	/* support only OMAP3 class */
	if (!cpu_is_omap34xx() && !soc_is_am33xx()) {
		pr_err("BCH ecc is not supported on this CPU\n");
		return 0;
	}

	/*
	 * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1
	 * and AM33xx derivates. Other chips may be added if confirmed to work.
	 */
	if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW) &&
	    (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0)) &&
	    (!soc_is_am33xx())) {
		pr_err("BCH 4-bit mode is not supported on this CPU\n");
		return 0;
	}

	return 1;
}

int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
		   struct gpmc_timings *gpmc_t)
{
	int err	= 0;
	struct device *dev = &gpmc_nand_device.dev;

	gpmc_nand_device.dev.platform_data = gpmc_nand_data;

	err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
				(unsigned long *)&gpmc_nand_resource[0].start);
	if (err < 0) {
		dev_err(dev, "Cannot request GPMC CS\n");
		return err;
	}

	gpmc_nand_resource[0].end = gpmc_nand_resource[0].start +
							NAND_IO_SIZE - 1;

	gpmc_nand_resource[1].start =
				gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE);
	gpmc_nand_resource[2].start =
				gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT);

	if (gpmc_t) {
		err = omap2_nand_gpmc_retime(gpmc_nand_data, gpmc_t);
		if (err < 0) {
			dev_err(dev, "Unable to set gpmc timings: %d\n", err);
			return err;
		}
	}

	/* Enable RD PIN Monitoring Reg */
	if (gpmc_nand_data->dev_ready) {
		gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_RDY_BSY, 1);
	}

	gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs);

	if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt))
		return -EINVAL;

	err = platform_device_register(&gpmc_nand_device);
	if (err < 0) {
		dev_err(dev, "Unable to register NAND device\n");
		goto out_free_cs;
	}

	return 0;

out_free_cs:
	gpmc_cs_free(gpmc_nand_data->cs);

	return err;
}