| R.Marek@sh.cvut.cz | 7f15b66 | 2005-05-26 12:42:19 +0000 | [diff] [blame] | 1 | Kernel driver lm92 |
| 2 | ================== |
| 3 | |
| 4 | Supported chips: |
| 5 | * National Semiconductor LM92 |
| 6 | Prefix: 'lm92' |
| 7 | Addresses scanned: I2C 0x48 - 0x4b |
| 8 | Datasheet: http://www.national.com/pf/LM/LM92.html |
| 9 | * National Semiconductor LM76 |
| 10 | Prefix: 'lm92' |
| 11 | Addresses scanned: none, force parameter needed |
| 12 | Datasheet: http://www.national.com/pf/LM/LM76.html |
| 13 | * Maxim MAX6633/MAX6634/MAX6635 |
| 14 | Prefix: 'lm92' |
| 15 | Addresses scanned: I2C 0x48 - 0x4b |
| 16 | MAX6633 with address in 0x40 - 0x47, 0x4c - 0x4f needs force parameter |
| 17 | and MAX6634 with address in 0x4c - 0x4f needs force parameter |
| 18 | Datasheet: http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3074 |
| 19 | |
| 20 | Authors: |
| 21 | Abraham van der Merwe <abraham@2d3d.co.za> |
| Jean Delvare | 7c81c60 | 2014-01-29 20:40:08 +0100 | [diff] [blame] | 22 | Jean Delvare <jdelvare@suse.de> |
| R.Marek@sh.cvut.cz | 7f15b66 | 2005-05-26 12:42:19 +0000 | [diff] [blame] | 23 | |
| 24 | |
| 25 | Description |
| 26 | ----------- |
| 27 | |
| 28 | This driver implements support for the National Semiconductor LM92 |
| 29 | temperature sensor. |
| 30 | |
| 31 | Each LM92 temperature sensor supports a single temperature sensor. There are |
| 32 | alarms for high, low, and critical thresholds. There's also an hysteresis to |
| 33 | control the thresholds for resetting alarms. |
| 34 | |
| 35 | Support was added later for the LM76 and Maxim MAX6633/MAX6634/MAX6635, |
| 36 | which are mostly compatible. They have not all been tested, so you |
| 37 | may need to use the force parameter. |