Bryan Wu | 19381f0 | 2007-05-21 18:09:31 +0800 | [diff] [blame] | 1 | /* |
| 2 | * File: include/asm-blackfin/mach-bf527/defBF527.h |
| 3 | * Based on: |
| 4 | * Author: |
| 5 | * |
| 6 | * Created: |
| 7 | * Description: |
| 8 | * |
| 9 | * Rev: |
| 10 | * |
| 11 | * Modified: |
| 12 | * |
| 13 | * Bugs: Enter bugs at http://blackfin.uclinux.org/ |
| 14 | * |
| 15 | * This program is free software; you can redistribute it and/or modify |
| 16 | * it under the terms of the GNU General Public License as published by |
| 17 | * the Free Software Foundation; either version 2, or (at your option) |
| 18 | * any later version. |
| 19 | * |
| 20 | * This program is distributed in the hope that it will be useful, |
| 21 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 22 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 23 | * GNU General Public License for more details. |
| 24 | * |
| 25 | * You should have received a copy of the GNU General Public License |
| 26 | * along with this program; see the file COPYING. |
| 27 | * If not, write to the Free Software Foundation, |
| 28 | * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| 29 | */ |
| 30 | |
| 31 | #ifndef _DEF_BF527_H |
| 32 | #define _DEF_BF527_H |
| 33 | |
| 34 | /* Include all Core registers and bit definitions */ |
Michael Hennerich | 5900314 | 2007-10-21 16:54:27 +0800 | [diff] [blame] | 35 | #include <asm/mach-common/def_LPBlackfin.h> |
Bryan Wu | 19381f0 | 2007-05-21 18:09:31 +0800 | [diff] [blame] | 36 | |
| 37 | /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */ |
| 38 | |
| 39 | /* Include defBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */ |
Michael Hennerich | 5900314 | 2007-10-21 16:54:27 +0800 | [diff] [blame] | 40 | #include "defBF52x_base.h" |
Bryan Wu | 19381f0 | 2007-05-21 18:09:31 +0800 | [diff] [blame] | 41 | |
| 42 | /* The following are the #defines needed by ADSP-BF527 that are not in the common header */ |
| 43 | /* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ |
| 44 | |
| 45 | #define EMAC_OPMODE 0xFFC03000 /* Operating Mode Register */ |
| 46 | #define EMAC_ADDRLO 0xFFC03004 /* Address Low (32 LSBs) Register */ |
| 47 | #define EMAC_ADDRHI 0xFFC03008 /* Address High (16 MSBs) Register */ |
| 48 | #define EMAC_HASHLO 0xFFC0300C /* Multicast Hash Table Low (Bins 31-0) Register */ |
| 49 | #define EMAC_HASHHI 0xFFC03010 /* Multicast Hash Table High (Bins 63-32) Register */ |
| 50 | #define EMAC_STAADD 0xFFC03014 /* Station Management Address Register */ |
| 51 | #define EMAC_STADAT 0xFFC03018 /* Station Management Data Register */ |
| 52 | #define EMAC_FLC 0xFFC0301C /* Flow Control Register */ |
| 53 | #define EMAC_VLAN1 0xFFC03020 /* VLAN1 Tag Register */ |
| 54 | #define EMAC_VLAN2 0xFFC03024 /* VLAN2 Tag Register */ |
| 55 | #define EMAC_WKUP_CTL 0xFFC0302C /* Wake-Up Control/Status Register */ |
| 56 | #define EMAC_WKUP_FFMSK0 0xFFC03030 /* Wake-Up Frame Filter 0 Byte Mask Register */ |
| 57 | #define EMAC_WKUP_FFMSK1 0xFFC03034 /* Wake-Up Frame Filter 1 Byte Mask Register */ |
| 58 | #define EMAC_WKUP_FFMSK2 0xFFC03038 /* Wake-Up Frame Filter 2 Byte Mask Register */ |
| 59 | #define EMAC_WKUP_FFMSK3 0xFFC0303C /* Wake-Up Frame Filter 3 Byte Mask Register */ |
| 60 | #define EMAC_WKUP_FFCMD 0xFFC03040 /* Wake-Up Frame Filter Commands Register */ |
| 61 | #define EMAC_WKUP_FFOFF 0xFFC03044 /* Wake-Up Frame Filter Offsets Register */ |
| 62 | #define EMAC_WKUP_FFCRC0 0xFFC03048 /* Wake-Up Frame Filter 0,1 CRC-16 Register */ |
| 63 | #define EMAC_WKUP_FFCRC1 0xFFC0304C /* Wake-Up Frame Filter 2,3 CRC-16 Register */ |
| 64 | |
| 65 | #define EMAC_SYSCTL 0xFFC03060 /* EMAC System Control Register */ |
| 66 | #define EMAC_SYSTAT 0xFFC03064 /* EMAC System Status Register */ |
| 67 | #define EMAC_RX_STAT 0xFFC03068 /* RX Current Frame Status Register */ |
| 68 | #define EMAC_RX_STKY 0xFFC0306C /* RX Sticky Frame Status Register */ |
| 69 | #define EMAC_RX_IRQE 0xFFC03070 /* RX Frame Status Interrupt Enables Register */ |
| 70 | #define EMAC_TX_STAT 0xFFC03074 /* TX Current Frame Status Register */ |
| 71 | #define EMAC_TX_STKY 0xFFC03078 /* TX Sticky Frame Status Register */ |
| 72 | #define EMAC_TX_IRQE 0xFFC0307C /* TX Frame Status Interrupt Enables Register */ |
| 73 | |
| 74 | #define EMAC_MMC_CTL 0xFFC03080 /* MMC Counter Control Register */ |
| 75 | #define EMAC_MMC_RIRQS 0xFFC03084 /* MMC RX Interrupt Status Register */ |
| 76 | #define EMAC_MMC_RIRQE 0xFFC03088 /* MMC RX Interrupt Enables Register */ |
| 77 | #define EMAC_MMC_TIRQS 0xFFC0308C /* MMC TX Interrupt Status Register */ |
| 78 | #define EMAC_MMC_TIRQE 0xFFC03090 /* MMC TX Interrupt Enables Register */ |
| 79 | |
| 80 | #define EMAC_RXC_OK 0xFFC03100 /* RX Frame Successful Count */ |
| 81 | #define EMAC_RXC_FCS 0xFFC03104 /* RX Frame FCS Failure Count */ |
| 82 | #define EMAC_RXC_ALIGN 0xFFC03108 /* RX Alignment Error Count */ |
| 83 | #define EMAC_RXC_OCTET 0xFFC0310C /* RX Octets Successfully Received Count */ |
| 84 | #define EMAC_RXC_DMAOVF 0xFFC03110 /* Internal MAC Sublayer Error RX Frame Count */ |
| 85 | #define EMAC_RXC_UNICST 0xFFC03114 /* Unicast RX Frame Count */ |
| 86 | #define EMAC_RXC_MULTI 0xFFC03118 /* Multicast RX Frame Count */ |
| 87 | #define EMAC_RXC_BROAD 0xFFC0311C /* Broadcast RX Frame Count */ |
| 88 | #define EMAC_RXC_LNERRI 0xFFC03120 /* RX Frame In Range Error Count */ |
| 89 | #define EMAC_RXC_LNERRO 0xFFC03124 /* RX Frame Out Of Range Error Count */ |
| 90 | #define EMAC_RXC_LONG 0xFFC03128 /* RX Frame Too Long Count */ |
| 91 | #define EMAC_RXC_MACCTL 0xFFC0312C /* MAC Control RX Frame Count */ |
| 92 | #define EMAC_RXC_OPCODE 0xFFC03130 /* Unsupported Op-Code RX Frame Count */ |
| 93 | #define EMAC_RXC_PAUSE 0xFFC03134 /* MAC Control Pause RX Frame Count */ |
| 94 | #define EMAC_RXC_ALLFRM 0xFFC03138 /* Overall RX Frame Count */ |
| 95 | #define EMAC_RXC_ALLOCT 0xFFC0313C /* Overall RX Octet Count */ |
| 96 | #define EMAC_RXC_TYPED 0xFFC03140 /* Type/Length Consistent RX Frame Count */ |
| 97 | #define EMAC_RXC_SHORT 0xFFC03144 /* RX Frame Fragment Count - Byte Count x < 64 */ |
| 98 | #define EMAC_RXC_EQ64 0xFFC03148 /* Good RX Frame Count - Byte Count x = 64 */ |
| 99 | #define EMAC_RXC_LT128 0xFFC0314C /* Good RX Frame Count - Byte Count 64 < x < 128 */ |
| 100 | #define EMAC_RXC_LT256 0xFFC03150 /* Good RX Frame Count - Byte Count 128 <= x < 256 */ |
| 101 | #define EMAC_RXC_LT512 0xFFC03154 /* Good RX Frame Count - Byte Count 256 <= x < 512 */ |
| 102 | #define EMAC_RXC_LT1024 0xFFC03158 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */ |
| 103 | #define EMAC_RXC_GE1024 0xFFC0315C /* Good RX Frame Count - Byte Count x >= 1024 */ |
| 104 | |
| 105 | #define EMAC_TXC_OK 0xFFC03180 /* TX Frame Successful Count */ |
| 106 | #define EMAC_TXC_1COL 0xFFC03184 /* TX Frames Successful After Single Collision Count */ |
| 107 | #define EMAC_TXC_GT1COL 0xFFC03188 /* TX Frames Successful After Multiple Collisions Count */ |
| 108 | #define EMAC_TXC_OCTET 0xFFC0318C /* TX Octets Successfully Received Count */ |
| 109 | #define EMAC_TXC_DEFER 0xFFC03190 /* TX Frame Delayed Due To Busy Count */ |
| 110 | #define EMAC_TXC_LATECL 0xFFC03194 /* Late TX Collisions Count */ |
| 111 | #define EMAC_TXC_XS_COL 0xFFC03198 /* TX Frame Failed Due To Excessive Collisions Count */ |
| 112 | #define EMAC_TXC_DMAUND 0xFFC0319C /* Internal MAC Sublayer Error TX Frame Count */ |
| 113 | #define EMAC_TXC_CRSERR 0xFFC031A0 /* Carrier Sense Deasserted During TX Frame Count */ |
| 114 | #define EMAC_TXC_UNICST 0xFFC031A4 /* Unicast TX Frame Count */ |
| 115 | #define EMAC_TXC_MULTI 0xFFC031A8 /* Multicast TX Frame Count */ |
| 116 | #define EMAC_TXC_BROAD 0xFFC031AC /* Broadcast TX Frame Count */ |
| 117 | #define EMAC_TXC_XS_DFR 0xFFC031B0 /* TX Frames With Excessive Deferral Count */ |
| 118 | #define EMAC_TXC_MACCTL 0xFFC031B4 /* MAC Control TX Frame Count */ |
| 119 | #define EMAC_TXC_ALLFRM 0xFFC031B8 /* Overall TX Frame Count */ |
| 120 | #define EMAC_TXC_ALLOCT 0xFFC031BC /* Overall TX Octet Count */ |
| 121 | #define EMAC_TXC_EQ64 0xFFC031C0 /* Good TX Frame Count - Byte Count x = 64 */ |
| 122 | #define EMAC_TXC_LT128 0xFFC031C4 /* Good TX Frame Count - Byte Count 64 < x < 128 */ |
| 123 | #define EMAC_TXC_LT256 0xFFC031C8 /* Good TX Frame Count - Byte Count 128 <= x < 256 */ |
| 124 | #define EMAC_TXC_LT512 0xFFC031CC /* Good TX Frame Count - Byte Count 256 <= x < 512 */ |
| 125 | #define EMAC_TXC_LT1024 0xFFC031D0 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */ |
| 126 | #define EMAC_TXC_GE1024 0xFFC031D4 /* Good TX Frame Count - Byte Count x >= 1024 */ |
| 127 | #define EMAC_TXC_ABORT 0xFFC031D8 /* Total TX Frames Aborted Count */ |
| 128 | |
| 129 | /* Listing for IEEE-Supported Count Registers */ |
| 130 | |
| 131 | #define FramesReceivedOK EMAC_RXC_OK /* RX Frame Successful Count */ |
| 132 | #define FrameCheckSequenceErrors EMAC_RXC_FCS /* RX Frame FCS Failure Count */ |
| 133 | #define AlignmentErrors EMAC_RXC_ALIGN /* RX Alignment Error Count */ |
| 134 | #define OctetsReceivedOK EMAC_RXC_OCTET /* RX Octets Successfully Received Count */ |
| 135 | #define FramesLostDueToIntMACRcvError EMAC_RXC_DMAOVF /* Internal MAC Sublayer Error RX Frame Count */ |
| 136 | #define UnicastFramesReceivedOK EMAC_RXC_UNICST /* Unicast RX Frame Count */ |
| 137 | #define MulticastFramesReceivedOK EMAC_RXC_MULTI /* Multicast RX Frame Count */ |
| 138 | #define BroadcastFramesReceivedOK EMAC_RXC_BROAD /* Broadcast RX Frame Count */ |
| 139 | #define InRangeLengthErrors EMAC_RXC_LNERRI /* RX Frame In Range Error Count */ |
| 140 | #define OutOfRangeLengthField EMAC_RXC_LNERRO /* RX Frame Out Of Range Error Count */ |
| 141 | #define FrameTooLongErrors EMAC_RXC_LONG /* RX Frame Too Long Count */ |
| 142 | #define MACControlFramesReceived EMAC_RXC_MACCTL /* MAC Control RX Frame Count */ |
| 143 | #define UnsupportedOpcodesReceived EMAC_RXC_OPCODE /* Unsupported Op-Code RX Frame Count */ |
| 144 | #define PAUSEMACCtrlFramesReceived EMAC_RXC_PAUSE /* MAC Control Pause RX Frame Count */ |
| 145 | #define FramesReceivedAll EMAC_RXC_ALLFRM /* Overall RX Frame Count */ |
| 146 | #define OctetsReceivedAll EMAC_RXC_ALLOCT /* Overall RX Octet Count */ |
| 147 | #define TypedFramesReceived EMAC_RXC_TYPED /* Type/Length Consistent RX Frame Count */ |
| 148 | #define FramesLenLt64Received EMAC_RXC_SHORT /* RX Frame Fragment Count - Byte Count x < 64 */ |
| 149 | #define FramesLenEq64Received EMAC_RXC_EQ64 /* Good RX Frame Count - Byte Count x = 64 */ |
| 150 | #define FramesLen65_127Received EMAC_RXC_LT128 /* Good RX Frame Count - Byte Count 64 < x < 128 */ |
| 151 | #define FramesLen128_255Received EMAC_RXC_LT256 /* Good RX Frame Count - Byte Count 128 <= x < 256 */ |
| 152 | #define FramesLen256_511Received EMAC_RXC_LT512 /* Good RX Frame Count - Byte Count 256 <= x < 512 */ |
| 153 | #define FramesLen512_1023Received EMAC_RXC_LT1024 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */ |
| 154 | #define FramesLen1024_MaxReceived EMAC_RXC_GE1024 /* Good RX Frame Count - Byte Count x >= 1024 */ |
| 155 | |
| 156 | #define FramesTransmittedOK EMAC_TXC_OK /* TX Frame Successful Count */ |
| 157 | #define SingleCollisionFrames EMAC_TXC_1COL /* TX Frames Successful After Single Collision Count */ |
| 158 | #define MultipleCollisionFrames EMAC_TXC_GT1COL /* TX Frames Successful After Multiple Collisions Count */ |
| 159 | #define OctetsTransmittedOK EMAC_TXC_OCTET /* TX Octets Successfully Received Count */ |
| 160 | #define FramesWithDeferredXmissions EMAC_TXC_DEFER /* TX Frame Delayed Due To Busy Count */ |
| 161 | #define LateCollisions EMAC_TXC_LATECL /* Late TX Collisions Count */ |
| 162 | #define FramesAbortedDueToXSColls EMAC_TXC_XS_COL /* TX Frame Failed Due To Excessive Collisions Count */ |
| 163 | #define FramesLostDueToIntMacXmitError EMAC_TXC_DMAUND /* Internal MAC Sublayer Error TX Frame Count */ |
| 164 | #define CarrierSenseErrors EMAC_TXC_CRSERR /* Carrier Sense Deasserted During TX Frame Count */ |
| 165 | #define UnicastFramesXmittedOK EMAC_TXC_UNICST /* Unicast TX Frame Count */ |
| 166 | #define MulticastFramesXmittedOK EMAC_TXC_MULTI /* Multicast TX Frame Count */ |
| 167 | #define BroadcastFramesXmittedOK EMAC_TXC_BROAD /* Broadcast TX Frame Count */ |
| 168 | #define FramesWithExcessiveDeferral EMAC_TXC_XS_DFR /* TX Frames With Excessive Deferral Count */ |
| 169 | #define MACControlFramesTransmitted EMAC_TXC_MACCTL /* MAC Control TX Frame Count */ |
| 170 | #define FramesTransmittedAll EMAC_TXC_ALLFRM /* Overall TX Frame Count */ |
| 171 | #define OctetsTransmittedAll EMAC_TXC_ALLOCT /* Overall TX Octet Count */ |
| 172 | #define FramesLenEq64Transmitted EMAC_TXC_EQ64 /* Good TX Frame Count - Byte Count x = 64 */ |
| 173 | #define FramesLen65_127Transmitted EMAC_TXC_LT128 /* Good TX Frame Count - Byte Count 64 < x < 128 */ |
| 174 | #define FramesLen128_255Transmitted EMAC_TXC_LT256 /* Good TX Frame Count - Byte Count 128 <= x < 256 */ |
| 175 | #define FramesLen256_511Transmitted EMAC_TXC_LT512 /* Good TX Frame Count - Byte Count 256 <= x < 512 */ |
| 176 | #define FramesLen512_1023Transmitted EMAC_TXC_LT1024 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */ |
| 177 | #define FramesLen1024_MaxTransmitted EMAC_TXC_GE1024 /* Good TX Frame Count - Byte Count x >= 1024 */ |
| 178 | #define TxAbortedFrames EMAC_TXC_ABORT /* Total TX Frames Aborted Count */ |
| 179 | |
| 180 | /*********************************************************************************** |
| 181 | ** System MMR Register Bits And Macros |
| 182 | ** |
| 183 | ** Disclaimer: All macros are intended to make C and Assembly code more readable. |
| 184 | ** Use these macros carefully, as any that do left shifts for field |
| 185 | ** depositing will result in the lower order bits being destroyed. Any |
| 186 | ** macro that shifts left to properly position the bit-field should be |
| 187 | ** used as part of an OR to initialize a register and NOT as a dynamic |
| 188 | ** modifier UNLESS the lower order bits are saved and ORed back in when |
| 189 | ** the macro is used. |
| 190 | *************************************************************************************/ |
| 191 | |
| 192 | /************************ ETHERNET 10/100 CONTROLLER MASKS ************************/ |
| 193 | |
| 194 | /* EMAC_OPMODE Masks */ |
| 195 | |
| 196 | #define RE 0x00000001 /* Receiver Enable */ |
| 197 | #define ASTP 0x00000002 /* Enable Automatic Pad Stripping On RX Frames */ |
| 198 | #define HU 0x00000010 /* Hash Filter Unicast Address */ |
| 199 | #define HM 0x00000020 /* Hash Filter Multicast Address */ |
| 200 | #define PAM 0x00000040 /* Pass-All-Multicast Mode Enable */ |
| 201 | #define PR 0x00000080 /* Promiscuous Mode Enable */ |
| 202 | #define IFE 0x00000100 /* Inverse Filtering Enable */ |
| 203 | #define DBF 0x00000200 /* Disable Broadcast Frame Reception */ |
| 204 | #define PBF 0x00000400 /* Pass Bad Frames Enable */ |
| 205 | #define PSF 0x00000800 /* Pass Short Frames Enable */ |
| 206 | #define RAF 0x00001000 /* Receive-All Mode */ |
| 207 | #define TE 0x00010000 /* Transmitter Enable */ |
| 208 | #define DTXPAD 0x00020000 /* Disable Automatic TX Padding */ |
| 209 | #define DTXCRC 0x00040000 /* Disable Automatic TX CRC Generation */ |
| 210 | #define DC 0x00080000 /* Deferral Check */ |
| 211 | #define BOLMT 0x00300000 /* Back-Off Limit */ |
| 212 | #define BOLMT_10 0x00000000 /* 10-bit range */ |
| 213 | #define BOLMT_8 0x00100000 /* 8-bit range */ |
| 214 | #define BOLMT_4 0x00200000 /* 4-bit range */ |
| 215 | #define BOLMT_1 0x00300000 /* 1-bit range */ |
| 216 | #define DRTY 0x00400000 /* Disable TX Retry On Collision */ |
| 217 | #define LCTRE 0x00800000 /* Enable TX Retry On Late Collision */ |
| 218 | #define RMII 0x01000000 /* RMII/MII* Mode */ |
| 219 | #define RMII_10 0x02000000 /* Speed Select for RMII Port (10MBit/100MBit*) */ |
| 220 | #define FDMODE 0x04000000 /* Duplex Mode Enable (Full/Half*) */ |
| 221 | #define LB 0x08000000 /* Internal Loopback Enable */ |
| 222 | #define DRO 0x10000000 /* Disable Receive Own Frames (Half-Duplex Mode) */ |
| 223 | |
| 224 | /* EMAC_STAADD Masks */ |
| 225 | |
| 226 | #define STABUSY 0x00000001 /* Initiate Station Mgt Reg Access / STA Busy Stat */ |
| 227 | #define STAOP 0x00000002 /* Station Management Operation Code (Write/Read*) */ |
| 228 | #define STADISPRE 0x00000004 /* Disable Preamble Generation */ |
| 229 | #define STAIE 0x00000008 /* Station Mgt. Transfer Done Interrupt Enable */ |
| 230 | #define REGAD 0x000007C0 /* STA Register Address */ |
| 231 | #define PHYAD 0x0000F800 /* PHY Device Address */ |
| 232 | |
| 233 | #define SET_REGAD(x) (((x)&0x1F)<< 6 ) /* Set STA Register Address */ |
| 234 | #define SET_PHYAD(x) (((x)&0x1F)<< 11 ) /* Set PHY Device Address */ |
| 235 | |
| 236 | /* EMAC_STADAT Mask */ |
| 237 | |
| 238 | #define STADATA 0x0000FFFF /* Station Management Data */ |
| 239 | |
| 240 | /* EMAC_FLC Masks */ |
| 241 | |
| 242 | #define FLCBUSY 0x00000001 /* Send Flow Ctrl Frame / Flow Ctrl Busy Status */ |
| 243 | #define FLCE 0x00000002 /* Flow Control Enable */ |
| 244 | #define PCF 0x00000004 /* Pass Control Frames */ |
| 245 | #define BKPRSEN 0x00000008 /* Enable Backpressure */ |
| 246 | #define FLCPAUSE 0xFFFF0000 /* Pause Time */ |
| 247 | |
| 248 | #define SET_FLCPAUSE(x) (((x)&0xFFFF)<< 16) /* Set Pause Time */ |
| 249 | |
| 250 | /* EMAC_WKUP_CTL Masks */ |
| 251 | |
| 252 | #define CAPWKFRM 0x00000001 /* Capture Wake-Up Frames */ |
| 253 | #define MPKE 0x00000002 /* Magic Packet Enable */ |
| 254 | #define RWKE 0x00000004 /* Remote Wake-Up Frame Enable */ |
| 255 | #define GUWKE 0x00000008 /* Global Unicast Wake Enable */ |
| 256 | #define MPKS 0x00000020 /* Magic Packet Received Status */ |
| 257 | #define RWKS 0x00000F00 /* Wake-Up Frame Received Status, Filters 3:0 */ |
| 258 | |
| 259 | /* EMAC_WKUP_FFCMD Masks */ |
| 260 | |
| 261 | #define WF0_E 0x00000001 /* Enable Wake-Up Filter 0 */ |
| 262 | #define WF0_T 0x00000008 /* Wake-Up Filter 0 Addr Type (Multicast/Unicast*) */ |
| 263 | #define WF1_E 0x00000100 /* Enable Wake-Up Filter 1 */ |
| 264 | #define WF1_T 0x00000800 /* Wake-Up Filter 1 Addr Type (Multicast/Unicast*) */ |
| 265 | #define WF2_E 0x00010000 /* Enable Wake-Up Filter 2 */ |
| 266 | #define WF2_T 0x00080000 /* Wake-Up Filter 2 Addr Type (Multicast/Unicast*) */ |
| 267 | #define WF3_E 0x01000000 /* Enable Wake-Up Filter 3 */ |
| 268 | #define WF3_T 0x08000000 /* Wake-Up Filter 3 Addr Type (Multicast/Unicast*) */ |
| 269 | |
| 270 | /* EMAC_WKUP_FFOFF Masks */ |
| 271 | |
| 272 | #define WF0_OFF 0x000000FF /* Wake-Up Filter 0 Pattern Offset */ |
| 273 | #define WF1_OFF 0x0000FF00 /* Wake-Up Filter 1 Pattern Offset */ |
| 274 | #define WF2_OFF 0x00FF0000 /* Wake-Up Filter 2 Pattern Offset */ |
| 275 | #define WF3_OFF 0xFF000000 /* Wake-Up Filter 3 Pattern Offset */ |
| 276 | |
| 277 | #define SET_WF0_OFF(x) (((x)&0xFF)<< 0 ) /* Set Wake-Up Filter 0 Byte Offset */ |
| 278 | #define SET_WF1_OFF(x) (((x)&0xFF)<< 8 ) /* Set Wake-Up Filter 1 Byte Offset */ |
| 279 | #define SET_WF2_OFF(x) (((x)&0xFF)<< 16 ) /* Set Wake-Up Filter 2 Byte Offset */ |
| 280 | #define SET_WF3_OFF(x) (((x)&0xFF)<< 24 ) /* Set Wake-Up Filter 3 Byte Offset */ |
| 281 | /* Set ALL Offsets */ |
| 282 | #define SET_WF_OFFS(x0,x1,x2,x3) (SET_WF0_OFF((x0))|SET_WF1_OFF((x1))|SET_WF2_OFF((x2))|SET_WF3_OFF((x3))) |
| 283 | |
| 284 | /* EMAC_WKUP_FFCRC0 Masks */ |
| 285 | |
| 286 | #define WF0_CRC 0x0000FFFF /* Wake-Up Filter 0 Pattern CRC */ |
| 287 | #define WF1_CRC 0xFFFF0000 /* Wake-Up Filter 1 Pattern CRC */ |
| 288 | |
| 289 | #define SET_WF0_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 0 Target CRC */ |
| 290 | #define SET_WF1_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 1 Target CRC */ |
| 291 | |
| 292 | /* EMAC_WKUP_FFCRC1 Masks */ |
| 293 | |
| 294 | #define WF2_CRC 0x0000FFFF /* Wake-Up Filter 2 Pattern CRC */ |
| 295 | #define WF3_CRC 0xFFFF0000 /* Wake-Up Filter 3 Pattern CRC */ |
| 296 | |
| 297 | #define SET_WF2_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 2 Target CRC */ |
| 298 | #define SET_WF3_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 3 Target CRC */ |
| 299 | |
| 300 | /* EMAC_SYSCTL Masks */ |
| 301 | |
| 302 | #define PHYIE 0x00000001 /* PHY_INT Interrupt Enable */ |
| 303 | #define RXDWA 0x00000002 /* Receive Frame DMA Word Alignment (Odd/Even*) */ |
| 304 | #define RXCKS 0x00000004 /* Enable RX Frame TCP/UDP Checksum Computation */ |
| 305 | #define MDCDIV 0x00003F00 /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))] */ |
| 306 | |
| 307 | #define SET_MDCDIV(x) (((x)&0x3F)<< 8) /* Set MDC Clock Divisor */ |
| 308 | |
| 309 | /* EMAC_SYSTAT Masks */ |
| 310 | |
| 311 | #define PHYINT 0x00000001 /* PHY_INT Interrupt Status */ |
| 312 | #define MMCINT 0x00000002 /* MMC Counter Interrupt Status */ |
| 313 | #define RXFSINT 0x00000004 /* RX Frame-Status Interrupt Status */ |
| 314 | #define TXFSINT 0x00000008 /* TX Frame-Status Interrupt Status */ |
| 315 | #define WAKEDET 0x00000010 /* Wake-Up Detected Status */ |
| 316 | #define RXDMAERR 0x00000020 /* RX DMA Direction Error Status */ |
| 317 | #define TXDMAERR 0x00000040 /* TX DMA Direction Error Status */ |
| 318 | #define STMDONE 0x00000080 /* Station Mgt. Transfer Done Interrupt Status */ |
| 319 | |
| 320 | /* EMAC_RX_STAT, EMAC_RX_STKY, and EMAC_RX_IRQE Masks */ |
| 321 | |
| 322 | #define RX_FRLEN 0x000007FF /* Frame Length In Bytes */ |
| 323 | #define RX_COMP 0x00001000 /* RX Frame Complete */ |
| 324 | #define RX_OK 0x00002000 /* RX Frame Received With No Errors */ |
| 325 | #define RX_LONG 0x00004000 /* RX Frame Too Long Error */ |
| 326 | #define RX_ALIGN 0x00008000 /* RX Frame Alignment Error */ |
| 327 | #define RX_CRC 0x00010000 /* RX Frame CRC Error */ |
| 328 | #define RX_LEN 0x00020000 /* RX Frame Length Error */ |
| 329 | #define RX_FRAG 0x00040000 /* RX Frame Fragment Error */ |
| 330 | #define RX_ADDR 0x00080000 /* RX Frame Address Filter Failed Error */ |
| 331 | #define RX_DMAO 0x00100000 /* RX Frame DMA Overrun Error */ |
| 332 | #define RX_PHY 0x00200000 /* RX Frame PHY Error */ |
| 333 | #define RX_LATE 0x00400000 /* RX Frame Late Collision Error */ |
| 334 | #define RX_RANGE 0x00800000 /* RX Frame Length Field Out of Range Error */ |
| 335 | #define RX_MULTI 0x01000000 /* RX Multicast Frame Indicator */ |
| 336 | #define RX_BROAD 0x02000000 /* RX Broadcast Frame Indicator */ |
| 337 | #define RX_CTL 0x04000000 /* RX Control Frame Indicator */ |
| 338 | #define RX_UCTL 0x08000000 /* Unsupported RX Control Frame Indicator */ |
| 339 | #define RX_TYPE 0x10000000 /* RX Typed Frame Indicator */ |
| 340 | #define RX_VLAN1 0x20000000 /* RX VLAN1 Frame Indicator */ |
| 341 | #define RX_VLAN2 0x40000000 /* RX VLAN2 Frame Indicator */ |
| 342 | #define RX_ACCEPT 0x80000000 /* RX Frame Accepted Indicator */ |
| 343 | |
| 344 | /* EMAC_TX_STAT, EMAC_TX_STKY, and EMAC_TX_IRQE Masks */ |
| 345 | |
| 346 | #define TX_COMP 0x00000001 /* TX Frame Complete */ |
| 347 | #define TX_OK 0x00000002 /* TX Frame Sent With No Errors */ |
| 348 | #define TX_ECOLL 0x00000004 /* TX Frame Excessive Collision Error */ |
| 349 | #define TX_LATE 0x00000008 /* TX Frame Late Collision Error */ |
| 350 | #define TX_DMAU 0x00000010 /* TX Frame DMA Underrun Error (STAT) */ |
| 351 | #define TX_MACE 0x00000010 /* Internal MAC Error Detected (STKY and IRQE) */ |
| 352 | #define TX_EDEFER 0x00000020 /* TX Frame Excessive Deferral Error */ |
| 353 | #define TX_BROAD 0x00000040 /* TX Broadcast Frame Indicator */ |
| 354 | #define TX_MULTI 0x00000080 /* TX Multicast Frame Indicator */ |
| 355 | #define TX_CCNT 0x00000F00 /* TX Frame Collision Count */ |
| 356 | #define TX_DEFER 0x00001000 /* TX Frame Deferred Indicator */ |
| 357 | #define TX_CRS 0x00002000 /* TX Frame Carrier Sense Not Asserted Error */ |
| 358 | #define TX_LOSS 0x00004000 /* TX Frame Carrier Lost During TX Error */ |
| 359 | #define TX_RETRY 0x00008000 /* TX Frame Successful After Retry */ |
| 360 | #define TX_FRLEN 0x07FF0000 /* TX Frame Length (Bytes) */ |
| 361 | |
| 362 | /* EMAC_MMC_CTL Masks */ |
| 363 | #define RSTC 0x00000001 /* Reset All Counters */ |
| 364 | #define CROLL 0x00000002 /* Counter Roll-Over Enable */ |
| 365 | #define CCOR 0x00000004 /* Counter Clear-On-Read Mode Enable */ |
| 366 | #define MMCE 0x00000008 /* Enable MMC Counter Operation */ |
| 367 | |
| 368 | /* EMAC_MMC_RIRQS and EMAC_MMC_RIRQE Masks */ |
| 369 | #define RX_OK_CNT 0x00000001 /* RX Frames Received With No Errors */ |
| 370 | #define RX_FCS_CNT 0x00000002 /* RX Frames W/Frame Check Sequence Errors */ |
| 371 | #define RX_ALIGN_CNT 0x00000004 /* RX Frames With Alignment Errors */ |
| 372 | #define RX_OCTET_CNT 0x00000008 /* RX Octets Received OK */ |
| 373 | #define RX_LOST_CNT 0x00000010 /* RX Frames Lost Due To Internal MAC RX Error */ |
| 374 | #define RX_UNI_CNT 0x00000020 /* Unicast RX Frames Received OK */ |
| 375 | #define RX_MULTI_CNT 0x00000040 /* Multicast RX Frames Received OK */ |
| 376 | #define RX_BROAD_CNT 0x00000080 /* Broadcast RX Frames Received OK */ |
| 377 | #define RX_IRL_CNT 0x00000100 /* RX Frames With In-Range Length Errors */ |
| 378 | #define RX_ORL_CNT 0x00000200 /* RX Frames With Out-Of-Range Length Errors */ |
| 379 | #define RX_LONG_CNT 0x00000400 /* RX Frames With Frame Too Long Errors */ |
| 380 | #define RX_MACCTL_CNT 0x00000800 /* MAC Control RX Frames Received */ |
| 381 | #define RX_OPCODE_CTL 0x00001000 /* Unsupported Op-Code RX Frames Received */ |
| 382 | #define RX_PAUSE_CNT 0x00002000 /* PAUSEMAC Control RX Frames Received */ |
| 383 | #define RX_ALLF_CNT 0x00004000 /* All RX Frames Received */ |
| 384 | #define RX_ALLO_CNT 0x00008000 /* All RX Octets Received */ |
| 385 | #define RX_TYPED_CNT 0x00010000 /* Typed RX Frames Received */ |
| 386 | #define RX_SHORT_CNT 0x00020000 /* RX Frame Fragments (< 64 Bytes) Received */ |
| 387 | #define RX_EQ64_CNT 0x00040000 /* 64-Byte RX Frames Received */ |
| 388 | #define RX_LT128_CNT 0x00080000 /* 65-127-Byte RX Frames Received */ |
| 389 | #define RX_LT256_CNT 0x00100000 /* 128-255-Byte RX Frames Received */ |
| 390 | #define RX_LT512_CNT 0x00200000 /* 256-511-Byte RX Frames Received */ |
| 391 | #define RX_LT1024_CNT 0x00400000 /* 512-1023-Byte RX Frames Received */ |
| 392 | #define RX_GE1024_CNT 0x00800000 /* 1024-Max-Byte RX Frames Received */ |
| 393 | |
| 394 | /* EMAC_MMC_TIRQS and EMAC_MMC_TIRQE Masks */ |
| 395 | |
| 396 | #define TX_OK_CNT 0x00000001 /* TX Frames Sent OK */ |
| 397 | #define TX_SCOLL_CNT 0x00000002 /* TX Frames With Single Collisions */ |
| 398 | #define TX_MCOLL_CNT 0x00000004 /* TX Frames With Multiple Collisions */ |
| 399 | #define TX_OCTET_CNT 0x00000008 /* TX Octets Sent OK */ |
| 400 | #define TX_DEFER_CNT 0x00000010 /* TX Frames With Deferred Transmission */ |
| 401 | #define TX_LATE_CNT 0x00000020 /* TX Frames With Late Collisions */ |
| 402 | #define TX_ABORTC_CNT 0x00000040 /* TX Frames Aborted Due To Excess Collisions */ |
| 403 | #define TX_LOST_CNT 0x00000080 /* TX Frames Lost Due To Internal MAC TX Error */ |
| 404 | #define TX_CRS_CNT 0x00000100 /* TX Frames With Carrier Sense Errors */ |
| 405 | #define TX_UNI_CNT 0x00000200 /* Unicast TX Frames Sent */ |
| 406 | #define TX_MULTI_CNT 0x00000400 /* Multicast TX Frames Sent */ |
| 407 | #define TX_BROAD_CNT 0x00000800 /* Broadcast TX Frames Sent */ |
| 408 | #define TX_EXDEF_CTL 0x00001000 /* TX Frames With Excessive Deferral */ |
| 409 | #define TX_MACCTL_CNT 0x00002000 /* MAC Control TX Frames Sent */ |
| 410 | #define TX_ALLF_CNT 0x00004000 /* All TX Frames Sent */ |
| 411 | #define TX_ALLO_CNT 0x00008000 /* All TX Octets Sent */ |
| 412 | #define TX_EQ64_CNT 0x00010000 /* 64-Byte TX Frames Sent */ |
| 413 | #define TX_LT128_CNT 0x00020000 /* 65-127-Byte TX Frames Sent */ |
| 414 | #define TX_LT256_CNT 0x00040000 /* 128-255-Byte TX Frames Sent */ |
| 415 | #define TX_LT512_CNT 0x00080000 /* 256-511-Byte TX Frames Sent */ |
| 416 | #define TX_LT1024_CNT 0x00100000 /* 512-1023-Byte TX Frames Sent */ |
| 417 | #define TX_GE1024_CNT 0x00200000 /* 1024-Max-Byte TX Frames Sent */ |
| 418 | #define TX_ABORT_CNT 0x00400000 /* TX Frames Aborted */ |
| 419 | |
| 420 | /* USB Control Registers */ |
| 421 | |
| 422 | #define USB_FADDR 0xffc03800 /* Function address register */ |
| 423 | #define USB_POWER 0xffc03804 /* Power management register */ |
| 424 | #define USB_INTRTX 0xffc03808 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */ |
| 425 | #define USB_INTRRX 0xffc0380c /* Interrupt register for Rx endpoints 1 to 7 */ |
| 426 | #define USB_INTRTXE 0xffc03810 /* Interrupt enable register for IntrTx */ |
| 427 | #define USB_INTRRXE 0xffc03814 /* Interrupt enable register for IntrRx */ |
| 428 | #define USB_INTRUSB 0xffc03818 /* Interrupt register for common USB interrupts */ |
| 429 | #define USB_INTRUSBE 0xffc0381c /* Interrupt enable register for IntrUSB */ |
| 430 | #define USB_FRAME 0xffc03820 /* USB frame number */ |
| 431 | #define USB_INDEX 0xffc03824 /* Index register for selecting the indexed endpoint registers */ |
| 432 | #define USB_TESTMODE 0xffc03828 /* Enabled USB 20 test modes */ |
| 433 | #define USB_GLOBINTR 0xffc0382c /* Global Interrupt Mask register and Wakeup Exception Interrupt */ |
| 434 | #define USB_GLOBAL_CTL 0xffc03830 /* Global Clock Control for the core */ |
| 435 | |
| 436 | /* USB Packet Control Registers */ |
| 437 | |
| 438 | #define USB_TX_MAX_PACKET 0xffc03840 /* Maximum packet size for Host Tx endpoint */ |
| 439 | #define USB_CSR0 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ |
| 440 | #define USB_TXCSR 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ |
| 441 | #define USB_RX_MAX_PACKET 0xffc03848 /* Maximum packet size for Host Rx endpoint */ |
| 442 | #define USB_RXCSR 0xffc0384c /* Control Status register for Host Rx endpoint */ |
| 443 | #define USB_COUNT0 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ |
| 444 | #define USB_RXCOUNT 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ |
| 445 | #define USB_TXTYPE 0xffc03854 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */ |
| 446 | #define USB_NAKLIMIT0 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ |
| 447 | #define USB_TXINTERVAL 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ |
| 448 | #define USB_RXTYPE 0xffc0385c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */ |
| 449 | #define USB_RXINTERVAL 0xffc03860 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */ |
| 450 | #define USB_TXCOUNT 0xffc03868 /* Number of bytes to be written to the selected endpoint Tx FIFO */ |
| 451 | |
| 452 | /* USB Endpoint FIFO Registers */ |
| 453 | |
| 454 | #define USB_EP0_FIFO 0xffc03880 /* Endpoint 0 FIFO */ |
| 455 | #define USB_EP1_FIFO 0xffc03888 /* Endpoint 1 FIFO */ |
| 456 | #define USB_EP2_FIFO 0xffc03890 /* Endpoint 2 FIFO */ |
| 457 | #define USB_EP3_FIFO 0xffc03898 /* Endpoint 3 FIFO */ |
| 458 | #define USB_EP4_FIFO 0xffc038a0 /* Endpoint 4 FIFO */ |
| 459 | #define USB_EP5_FIFO 0xffc038a8 /* Endpoint 5 FIFO */ |
| 460 | #define USB_EP6_FIFO 0xffc038b0 /* Endpoint 6 FIFO */ |
| 461 | #define USB_EP7_FIFO 0xffc038b8 /* Endpoint 7 FIFO */ |
| 462 | |
| 463 | /* USB OTG Control Registers */ |
| 464 | |
| 465 | #define USB_OTG_DEV_CTL 0xffc03900 /* OTG Device Control Register */ |
| 466 | #define USB_OTG_VBUS_IRQ 0xffc03904 /* OTG VBUS Control Interrupts */ |
| 467 | #define USB_OTG_VBUS_MASK 0xffc03908 /* VBUS Control Interrupt Enable */ |
| 468 | |
| 469 | /* USB Phy Control Registers */ |
| 470 | |
| 471 | #define USB_LINKINFO 0xffc03948 /* Enables programming of some PHY-side delays */ |
| 472 | #define USB_VPLEN 0xffc0394c /* Determines duration of VBUS pulse for VBUS charging */ |
| 473 | #define USB_HS_EOF1 0xffc03950 /* Time buffer for High-Speed transactions */ |
| 474 | #define USB_FS_EOF1 0xffc03954 /* Time buffer for Full-Speed transactions */ |
| 475 | #define USB_LS_EOF1 0xffc03958 /* Time buffer for Low-Speed transactions */ |
| 476 | |
| 477 | /* (APHY_CNTRL is for ADI usage only) */ |
| 478 | |
| 479 | #define USB_APHY_CNTRL 0xffc039e0 /* Register that increases visibility of Analog PHY */ |
| 480 | |
| 481 | /* (APHY_CALIB is for ADI usage only) */ |
| 482 | |
| 483 | #define USB_APHY_CALIB 0xffc039e4 /* Register used to set some calibration values */ |
| 484 | |
| 485 | #define USB_APHY_CNTRL2 0xffc039e8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */ |
| 486 | |
| 487 | /* (PHY_TEST is for ADI usage only) */ |
| 488 | |
| 489 | #define USB_PHY_TEST 0xffc039ec /* Used for reducing simulation time and simplifies FIFO testability */ |
| 490 | |
| 491 | #define USB_PLLOSC_CTRL 0xffc039f0 /* Used to program different parameters for USB PLL and Oscillator */ |
| 492 | #define USB_SRP_CLKDIV 0xffc039f4 /* Used to program clock divide value for the clock fed to the SRP detection logic */ |
| 493 | |
| 494 | /* USB Endpoint 0 Control Registers */ |
| 495 | |
| 496 | #define USB_EP_NI0_TXMAXP 0xffc03a00 /* Maximum packet size for Host Tx endpoint0 */ |
| 497 | #define USB_EP_NI0_TXCSR 0xffc03a04 /* Control Status register for endpoint 0 */ |
| 498 | #define USB_EP_NI0_RXMAXP 0xffc03a08 /* Maximum packet size for Host Rx endpoint0 */ |
| 499 | #define USB_EP_NI0_RXCSR 0xffc03a0c /* Control Status register for Host Rx endpoint0 */ |
| 500 | #define USB_EP_NI0_RXCOUNT 0xffc03a10 /* Number of bytes received in endpoint 0 FIFO */ |
| 501 | #define USB_EP_NI0_TXTYPE 0xffc03a14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */ |
| 502 | #define USB_EP_NI0_TXINTERVAL 0xffc03a18 /* Sets the NAK response timeout on Endpoint 0 */ |
| 503 | #define USB_EP_NI0_RXTYPE 0xffc03a1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */ |
| 504 | #define USB_EP_NI0_RXINTERVAL 0xffc03a20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */ |
| 505 | #define USB_EP_NI0_TXCOUNT 0xffc03a28 /* Number of bytes to be written to the endpoint0 Tx FIFO */ |
| 506 | |
| 507 | /* USB Endpoint 1 Control Registers */ |
| 508 | |
| 509 | #define USB_EP_NI1_TXMAXP 0xffc03a40 /* Maximum packet size for Host Tx endpoint1 */ |
| 510 | #define USB_EP_NI1_TXCSR 0xffc03a44 /* Control Status register for endpoint1 */ |
| 511 | #define USB_EP_NI1_RXMAXP 0xffc03a48 /* Maximum packet size for Host Rx endpoint1 */ |
| 512 | #define USB_EP_NI1_RXCSR 0xffc03a4c /* Control Status register for Host Rx endpoint1 */ |
| 513 | #define USB_EP_NI1_RXCOUNT 0xffc03a50 /* Number of bytes received in endpoint1 FIFO */ |
| 514 | #define USB_EP_NI1_TXTYPE 0xffc03a54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */ |
| 515 | #define USB_EP_NI1_TXINTERVAL 0xffc03a58 /* Sets the NAK response timeout on Endpoint1 */ |
| 516 | #define USB_EP_NI1_RXTYPE 0xffc03a5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */ |
| 517 | #define USB_EP_NI1_RXINTERVAL 0xffc03a60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */ |
| 518 | #define USB_EP_NI1_TXCOUNT 0xffc03a68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */ |
| 519 | |
| 520 | /* USB Endpoint 2 Control Registers */ |
| 521 | |
| 522 | #define USB_EP_NI2_TXMAXP 0xffc03a80 /* Maximum packet size for Host Tx endpoint2 */ |
| 523 | #define USB_EP_NI2_TXCSR 0xffc03a84 /* Control Status register for endpoint2 */ |
| 524 | #define USB_EP_NI2_RXMAXP 0xffc03a88 /* Maximum packet size for Host Rx endpoint2 */ |
| 525 | #define USB_EP_NI2_RXCSR 0xffc03a8c /* Control Status register for Host Rx endpoint2 */ |
| 526 | #define USB_EP_NI2_RXCOUNT 0xffc03a90 /* Number of bytes received in endpoint2 FIFO */ |
| 527 | #define USB_EP_NI2_TXTYPE 0xffc03a94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */ |
| 528 | #define USB_EP_NI2_TXINTERVAL 0xffc03a98 /* Sets the NAK response timeout on Endpoint2 */ |
| 529 | #define USB_EP_NI2_RXTYPE 0xffc03a9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */ |
| 530 | #define USB_EP_NI2_RXINTERVAL 0xffc03aa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */ |
| 531 | #define USB_EP_NI2_TXCOUNT 0xffc03aa8 /* Number of bytes to be written to the endpoint2 Tx FIFO */ |
| 532 | |
| 533 | /* USB Endpoint 3 Control Registers */ |
| 534 | |
| 535 | #define USB_EP_NI3_TXMAXP 0xffc03ac0 /* Maximum packet size for Host Tx endpoint3 */ |
| 536 | #define USB_EP_NI3_TXCSR 0xffc03ac4 /* Control Status register for endpoint3 */ |
| 537 | #define USB_EP_NI3_RXMAXP 0xffc03ac8 /* Maximum packet size for Host Rx endpoint3 */ |
| 538 | #define USB_EP_NI3_RXCSR 0xffc03acc /* Control Status register for Host Rx endpoint3 */ |
| 539 | #define USB_EP_NI3_RXCOUNT 0xffc03ad0 /* Number of bytes received in endpoint3 FIFO */ |
| 540 | #define USB_EP_NI3_TXTYPE 0xffc03ad4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */ |
| 541 | #define USB_EP_NI3_TXINTERVAL 0xffc03ad8 /* Sets the NAK response timeout on Endpoint3 */ |
| 542 | #define USB_EP_NI3_RXTYPE 0xffc03adc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */ |
| 543 | #define USB_EP_NI3_RXINTERVAL 0xffc03ae0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */ |
| 544 | #define USB_EP_NI3_TXCOUNT 0xffc03ae8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */ |
| 545 | |
| 546 | /* USB Endpoint 4 Control Registers */ |
| 547 | |
| 548 | #define USB_EP_NI4_TXMAXP 0xffc03b00 /* Maximum packet size for Host Tx endpoint4 */ |
| 549 | #define USB_EP_NI4_TXCSR 0xffc03b04 /* Control Status register for endpoint4 */ |
| 550 | #define USB_EP_NI4_RXMAXP 0xffc03b08 /* Maximum packet size for Host Rx endpoint4 */ |
| 551 | #define USB_EP_NI4_RXCSR 0xffc03b0c /* Control Status register for Host Rx endpoint4 */ |
| 552 | #define USB_EP_NI4_RXCOUNT 0xffc03b10 /* Number of bytes received in endpoint4 FIFO */ |
| 553 | #define USB_EP_NI4_TXTYPE 0xffc03b14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */ |
| 554 | #define USB_EP_NI4_TXINTERVAL 0xffc03b18 /* Sets the NAK response timeout on Endpoint4 */ |
| 555 | #define USB_EP_NI4_RXTYPE 0xffc03b1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */ |
| 556 | #define USB_EP_NI4_RXINTERVAL 0xffc03b20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */ |
| 557 | #define USB_EP_NI4_TXCOUNT 0xffc03b28 /* Number of bytes to be written to the endpoint4 Tx FIFO */ |
| 558 | |
| 559 | /* USB Endpoint 5 Control Registers */ |
| 560 | |
| 561 | #define USB_EP_NI5_TXMAXP 0xffc03b40 /* Maximum packet size for Host Tx endpoint5 */ |
| 562 | #define USB_EP_NI5_TXCSR 0xffc03b44 /* Control Status register for endpoint5 */ |
| 563 | #define USB_EP_NI5_RXMAXP 0xffc03b48 /* Maximum packet size for Host Rx endpoint5 */ |
| 564 | #define USB_EP_NI5_RXCSR 0xffc03b4c /* Control Status register for Host Rx endpoint5 */ |
| 565 | #define USB_EP_NI5_RXCOUNT 0xffc03b50 /* Number of bytes received in endpoint5 FIFO */ |
| 566 | #define USB_EP_NI5_TXTYPE 0xffc03b54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */ |
| 567 | #define USB_EP_NI5_TXINTERVAL 0xffc03b58 /* Sets the NAK response timeout on Endpoint5 */ |
| 568 | #define USB_EP_NI5_RXTYPE 0xffc03b5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */ |
| 569 | #define USB_EP_NI5_RXINTERVAL 0xffc03b60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */ |
| 570 | #define USB_EP_NI5_TXCOUNT 0xffc03b68 /* Number of bytes to be written to the endpoint5 Tx FIFO */ |
| 571 | |
| 572 | /* USB Endpoint 6 Control Registers */ |
| 573 | |
| 574 | #define USB_EP_NI6_TXMAXP 0xffc03b80 /* Maximum packet size for Host Tx endpoint6 */ |
| 575 | #define USB_EP_NI6_TXCSR 0xffc03b84 /* Control Status register for endpoint6 */ |
| 576 | #define USB_EP_NI6_RXMAXP 0xffc03b88 /* Maximum packet size for Host Rx endpoint6 */ |
| 577 | #define USB_EP_NI6_RXCSR 0xffc03b8c /* Control Status register for Host Rx endpoint6 */ |
| 578 | #define USB_EP_NI6_RXCOUNT 0xffc03b90 /* Number of bytes received in endpoint6 FIFO */ |
| 579 | #define USB_EP_NI6_TXTYPE 0xffc03b94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */ |
| 580 | #define USB_EP_NI6_TXINTERVAL 0xffc03b98 /* Sets the NAK response timeout on Endpoint6 */ |
| 581 | #define USB_EP_NI6_RXTYPE 0xffc03b9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */ |
| 582 | #define USB_EP_NI6_RXINTERVAL 0xffc03ba0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */ |
| 583 | #define USB_EP_NI6_TXCOUNT 0xffc03ba8 /* Number of bytes to be written to the endpoint6 Tx FIFO */ |
| 584 | |
| 585 | /* USB Endpoint 7 Control Registers */ |
| 586 | |
| 587 | #define USB_EP_NI7_TXMAXP 0xffc03bc0 /* Maximum packet size for Host Tx endpoint7 */ |
| 588 | #define USB_EP_NI7_TXCSR 0xffc03bc4 /* Control Status register for endpoint7 */ |
| 589 | #define USB_EP_NI7_RXMAXP 0xffc03bc8 /* Maximum packet size for Host Rx endpoint7 */ |
| 590 | #define USB_EP_NI7_RXCSR 0xffc03bcc /* Control Status register for Host Rx endpoint7 */ |
| 591 | #define USB_EP_NI7_RXCOUNT 0xffc03bd0 /* Number of bytes received in endpoint7 FIFO */ |
| 592 | #define USB_EP_NI7_TXTYPE 0xffc03bd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */ |
| 593 | #define USB_EP_NI7_TXINTERVAL 0xffc03bd8 /* Sets the NAK response timeout on Endpoint7 */ |
| 594 | #define USB_EP_NI7_RXTYPE 0xffc03bdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */ |
| 595 | #define USB_EP_NI7_RXINTERVAL 0xffc03bf0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ |
| 596 | #define USB_EP_NI7_TXCOUNT 0xffc03bf8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ |
| 597 | |
| 598 | #define USB_DMA_INTERRUPT 0xffc03c00 /* Indicates pending interrupts for the DMA channels */ |
| 599 | |
| 600 | /* USB Channel 0 Config Registers */ |
| 601 | |
| 602 | #define USB_DMA0CONTROL 0xffc03c04 /* DMA master channel 0 configuration */ |
| 603 | #define USB_DMA0ADDRLOW 0xffc03c08 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */ |
| 604 | #define USB_DMA0ADDRHIGH 0xffc03c0c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */ |
| 605 | #define USB_DMA0COUNTLOW 0xffc03c10 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */ |
| 606 | #define USB_DMA0COUNTHIGH 0xffc03c14 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */ |
| 607 | |
| 608 | /* USB Channel 1 Config Registers */ |
| 609 | |
| 610 | #define USB_DMA1CONTROL 0xffc03c24 /* DMA master channel 1 configuration */ |
| 611 | #define USB_DMA1ADDRLOW 0xffc03c28 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */ |
| 612 | #define USB_DMA1ADDRHIGH 0xffc03c2c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */ |
| 613 | #define USB_DMA1COUNTLOW 0xffc03c30 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */ |
| 614 | #define USB_DMA1COUNTHIGH 0xffc03c34 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */ |
| 615 | |
| 616 | /* USB Channel 2 Config Registers */ |
| 617 | |
| 618 | #define USB_DMA2CONTROL 0xffc03c44 /* DMA master channel 2 configuration */ |
| 619 | #define USB_DMA2ADDRLOW 0xffc03c48 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */ |
| 620 | #define USB_DMA2ADDRHIGH 0xffc03c4c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */ |
| 621 | #define USB_DMA2COUNTLOW 0xffc03c50 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */ |
| 622 | #define USB_DMA2COUNTHIGH 0xffc03c54 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */ |
| 623 | |
| 624 | /* USB Channel 3 Config Registers */ |
| 625 | |
| 626 | #define USB_DMA3CONTROL 0xffc03c64 /* DMA master channel 3 configuration */ |
| 627 | #define USB_DMA3ADDRLOW 0xffc03c68 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */ |
| 628 | #define USB_DMA3ADDRHIGH 0xffc03c6c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */ |
| 629 | #define USB_DMA3COUNTLOW 0xffc03c70 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */ |
| 630 | #define USB_DMA3COUNTHIGH 0xffc03c74 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */ |
| 631 | |
| 632 | /* USB Channel 4 Config Registers */ |
| 633 | |
| 634 | #define USB_DMA4CONTROL 0xffc03c84 /* DMA master channel 4 configuration */ |
| 635 | #define USB_DMA4ADDRLOW 0xffc03c88 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */ |
| 636 | #define USB_DMA4ADDRHIGH 0xffc03c8c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */ |
| 637 | #define USB_DMA4COUNTLOW 0xffc03c90 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */ |
| 638 | #define USB_DMA4COUNTHIGH 0xffc03c94 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */ |
| 639 | |
| 640 | /* USB Channel 5 Config Registers */ |
| 641 | |
| 642 | #define USB_DMA5CONTROL 0xffc03ca4 /* DMA master channel 5 configuration */ |
| 643 | #define USB_DMA5ADDRLOW 0xffc03ca8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */ |
| 644 | #define USB_DMA5ADDRHIGH 0xffc03cac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */ |
| 645 | #define USB_DMA5COUNTLOW 0xffc03cb0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */ |
| 646 | #define USB_DMA5COUNTHIGH 0xffc03cb4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */ |
| 647 | |
| 648 | /* USB Channel 6 Config Registers */ |
| 649 | |
| 650 | #define USB_DMA6CONTROL 0xffc03cc4 /* DMA master channel 6 configuration */ |
| 651 | #define USB_DMA6ADDRLOW 0xffc03cc8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */ |
| 652 | #define USB_DMA6ADDRHIGH 0xffc03ccc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */ |
| 653 | #define USB_DMA6COUNTLOW 0xffc03cd0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */ |
| 654 | #define USB_DMA6COUNTHIGH 0xffc03cd4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */ |
| 655 | |
| 656 | /* USB Channel 7 Config Registers */ |
| 657 | |
| 658 | #define USB_DMA7CONTROL 0xffc03ce4 /* DMA master channel 7 configuration */ |
| 659 | #define USB_DMA7ADDRLOW 0xffc03ce8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */ |
| 660 | #define USB_DMA7ADDRHIGH 0xffc03cec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */ |
| 661 | #define USB_DMA7COUNTLOW 0xffc03cf0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */ |
| 662 | #define USB_DMA7COUNTHIGH 0xffc03cf4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */ |
| 663 | |
| 664 | /* Bit masks for USB_FADDR */ |
| 665 | |
| 666 | #define FUNCTION_ADDRESS 0x7f /* Function address */ |
| 667 | |
| 668 | /* Bit masks for USB_POWER */ |
| 669 | |
| 670 | #define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */ |
| 671 | #define nENABLE_SUSPENDM 0x0 |
| 672 | #define SUSPEND_MODE 0x2 /* Suspend Mode indicator */ |
| 673 | #define nSUSPEND_MODE 0x0 |
| 674 | #define RESUME_MODE 0x4 /* DMA Mode */ |
| 675 | #define nRESUME_MODE 0x0 |
| 676 | #define RESET 0x8 /* Reset indicator */ |
| 677 | #define nRESET 0x0 |
| 678 | #define HS_MODE 0x10 /* High Speed mode indicator */ |
| 679 | #define nHS_MODE 0x0 |
| 680 | #define HS_ENABLE 0x20 /* high Speed Enable */ |
| 681 | #define nHS_ENABLE 0x0 |
| 682 | #define SOFT_CONN 0x40 /* Soft connect */ |
| 683 | #define nSOFT_CONN 0x0 |
| 684 | #define ISO_UPDATE 0x80 /* Isochronous update */ |
| 685 | #define nISO_UPDATE 0x0 |
| 686 | |
| 687 | /* Bit masks for USB_INTRTX */ |
| 688 | |
| 689 | #define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */ |
| 690 | #define nEP0_TX 0x0 |
| 691 | #define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */ |
| 692 | #define nEP1_TX 0x0 |
| 693 | #define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */ |
| 694 | #define nEP2_TX 0x0 |
| 695 | #define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */ |
| 696 | #define nEP3_TX 0x0 |
| 697 | #define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */ |
| 698 | #define nEP4_TX 0x0 |
| 699 | #define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */ |
| 700 | #define nEP5_TX 0x0 |
| 701 | #define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */ |
| 702 | #define nEP6_TX 0x0 |
| 703 | #define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */ |
| 704 | #define nEP7_TX 0x0 |
| 705 | |
| 706 | /* Bit masks for USB_INTRRX */ |
| 707 | |
| 708 | #define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */ |
| 709 | #define nEP1_RX 0x0 |
| 710 | #define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */ |
| 711 | #define nEP2_RX 0x0 |
| 712 | #define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */ |
| 713 | #define nEP3_RX 0x0 |
| 714 | #define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */ |
| 715 | #define nEP4_RX 0x0 |
| 716 | #define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */ |
| 717 | #define nEP5_RX 0x0 |
| 718 | #define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */ |
| 719 | #define nEP6_RX 0x0 |
| 720 | #define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */ |
| 721 | #define nEP7_RX 0x0 |
| 722 | |
| 723 | /* Bit masks for USB_INTRTXE */ |
| 724 | |
| 725 | #define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */ |
| 726 | #define nEP0_TX_E 0x0 |
| 727 | #define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */ |
| 728 | #define nEP1_TX_E 0x0 |
| 729 | #define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */ |
| 730 | #define nEP2_TX_E 0x0 |
| 731 | #define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */ |
| 732 | #define nEP3_TX_E 0x0 |
| 733 | #define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */ |
| 734 | #define nEP4_TX_E 0x0 |
| 735 | #define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */ |
| 736 | #define nEP5_TX_E 0x0 |
| 737 | #define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */ |
| 738 | #define nEP6_TX_E 0x0 |
| 739 | #define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */ |
| 740 | #define nEP7_TX_E 0x0 |
| 741 | |
| 742 | /* Bit masks for USB_INTRRXE */ |
| 743 | |
| 744 | #define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */ |
| 745 | #define nEP1_RX_E 0x0 |
| 746 | #define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */ |
| 747 | #define nEP2_RX_E 0x0 |
| 748 | #define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */ |
| 749 | #define nEP3_RX_E 0x0 |
| 750 | #define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */ |
| 751 | #define nEP4_RX_E 0x0 |
| 752 | #define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */ |
| 753 | #define nEP5_RX_E 0x0 |
| 754 | #define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */ |
| 755 | #define nEP6_RX_E 0x0 |
| 756 | #define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */ |
| 757 | #define nEP7_RX_E 0x0 |
| 758 | |
| 759 | /* Bit masks for USB_INTRUSB */ |
| 760 | |
| 761 | #define SUSPEND_B 0x1 /* Suspend indicator */ |
| 762 | #define nSUSPEND_B 0x0 |
| 763 | #define RESUME_B 0x2 /* Resume indicator */ |
| 764 | #define nRESUME_B 0x0 |
| 765 | #define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */ |
| 766 | #define nRESET_OR_BABLE_B 0x0 |
| 767 | #define SOF_B 0x8 /* Start of frame */ |
| 768 | #define nSOF_B 0x0 |
| 769 | #define CONN_B 0x10 /* Connection indicator */ |
| 770 | #define nCONN_B 0x0 |
| 771 | #define DISCON_B 0x20 /* Disconnect indicator */ |
| 772 | #define nDISCON_B 0x0 |
| 773 | #define SESSION_REQ_B 0x40 /* Session Request */ |
| 774 | #define nSESSION_REQ_B 0x0 |
| 775 | #define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */ |
| 776 | #define nVBUS_ERROR_B 0x0 |
| 777 | |
| 778 | /* Bit masks for USB_INTRUSBE */ |
| 779 | |
| 780 | #define SUSPEND_BE 0x1 /* Suspend indicator int enable */ |
| 781 | #define nSUSPEND_BE 0x0 |
| 782 | #define RESUME_BE 0x2 /* Resume indicator int enable */ |
| 783 | #define nRESUME_BE 0x0 |
| 784 | #define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */ |
| 785 | #define nRESET_OR_BABLE_BE 0x0 |
| 786 | #define SOF_BE 0x8 /* Start of frame int enable */ |
| 787 | #define nSOF_BE 0x0 |
| 788 | #define CONN_BE 0x10 /* Connection indicator int enable */ |
| 789 | #define nCONN_BE 0x0 |
| 790 | #define DISCON_BE 0x20 /* Disconnect indicator int enable */ |
| 791 | #define nDISCON_BE 0x0 |
| 792 | #define SESSION_REQ_BE 0x40 /* Session Request int enable */ |
| 793 | #define nSESSION_REQ_BE 0x0 |
| 794 | #define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */ |
| 795 | #define nVBUS_ERROR_BE 0x0 |
| 796 | |
| 797 | /* Bit masks for USB_FRAME */ |
| 798 | |
| 799 | #define FRAME_NUMBER 0x7ff /* Frame number */ |
| 800 | |
| 801 | /* Bit masks for USB_INDEX */ |
| 802 | |
| 803 | #define SELECTED_ENDPOINT 0xf /* selected endpoint */ |
| 804 | |
| 805 | /* Bit masks for USB_GLOBAL_CTL */ |
| 806 | |
| 807 | #define GLOBAL_ENA 0x1 /* enables USB module */ |
| 808 | #define nGLOBAL_ENA 0x0 |
| 809 | #define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */ |
| 810 | #define nEP1_TX_ENA 0x0 |
| 811 | #define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */ |
| 812 | #define nEP2_TX_ENA 0x0 |
| 813 | #define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */ |
| 814 | #define nEP3_TX_ENA 0x0 |
| 815 | #define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */ |
| 816 | #define nEP4_TX_ENA 0x0 |
| 817 | #define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */ |
| 818 | #define nEP5_TX_ENA 0x0 |
| 819 | #define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */ |
| 820 | #define nEP6_TX_ENA 0x0 |
| 821 | #define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */ |
| 822 | #define nEP7_TX_ENA 0x0 |
| 823 | #define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */ |
| 824 | #define nEP1_RX_ENA 0x0 |
| 825 | #define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */ |
| 826 | #define nEP2_RX_ENA 0x0 |
| 827 | #define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */ |
| 828 | #define nEP3_RX_ENA 0x0 |
| 829 | #define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */ |
| 830 | #define nEP4_RX_ENA 0x0 |
| 831 | #define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */ |
| 832 | #define nEP5_RX_ENA 0x0 |
| 833 | #define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */ |
| 834 | #define nEP6_RX_ENA 0x0 |
| 835 | #define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */ |
| 836 | #define nEP7_RX_ENA 0x0 |
| 837 | |
| 838 | /* Bit masks for USB_OTG_DEV_CTL */ |
| 839 | |
| 840 | #define SESSION 0x1 /* session indicator */ |
| 841 | #define nSESSION 0x0 |
| 842 | #define HOST_REQ 0x2 /* Host negotiation request */ |
| 843 | #define nHOST_REQ 0x0 |
| 844 | #define HOST_MODE 0x4 /* indicates USBDRC is a host */ |
| 845 | #define nHOST_MODE 0x0 |
| 846 | #define VBUS0 0x8 /* Vbus level indicator[0] */ |
| 847 | #define nVBUS0 0x0 |
| 848 | #define VBUS1 0x10 /* Vbus level indicator[1] */ |
| 849 | #define nVBUS1 0x0 |
| 850 | #define LSDEV 0x20 /* Low-speed indicator */ |
| 851 | #define nLSDEV 0x0 |
| 852 | #define FSDEV 0x40 /* Full or High-speed indicator */ |
| 853 | #define nFSDEV 0x0 |
| 854 | #define B_DEVICE 0x80 /* A' or 'B' device indicator */ |
| 855 | #define nB_DEVICE 0x0 |
| 856 | |
| 857 | /* Bit masks for USB_OTG_VBUS_IRQ */ |
| 858 | |
| 859 | #define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */ |
| 860 | #define nDRIVE_VBUS_ON 0x0 |
| 861 | #define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */ |
| 862 | #define nDRIVE_VBUS_OFF 0x0 |
| 863 | #define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */ |
| 864 | #define nCHRG_VBUS_START 0x0 |
| 865 | #define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */ |
| 866 | #define nCHRG_VBUS_END 0x0 |
| 867 | #define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */ |
| 868 | #define nDISCHRG_VBUS_START 0x0 |
| 869 | #define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */ |
| 870 | #define nDISCHRG_VBUS_END 0x0 |
| 871 | |
| 872 | /* Bit masks for USB_OTG_VBUS_MASK */ |
| 873 | |
| 874 | #define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */ |
| 875 | #define nDRIVE_VBUS_ON_ENA 0x0 |
| 876 | #define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */ |
| 877 | #define nDRIVE_VBUS_OFF_ENA 0x0 |
| 878 | #define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */ |
| 879 | #define nCHRG_VBUS_START_ENA 0x0 |
| 880 | #define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */ |
| 881 | #define nCHRG_VBUS_END_ENA 0x0 |
| 882 | #define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */ |
| 883 | #define nDISCHRG_VBUS_START_ENA 0x0 |
| 884 | #define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */ |
| 885 | #define nDISCHRG_VBUS_END_ENA 0x0 |
| 886 | |
| 887 | /* Bit masks for USB_CSR0 */ |
| 888 | |
| 889 | #define RXPKTRDY 0x1 /* data packet receive indicator */ |
| 890 | #define nRXPKTRDY 0x0 |
| 891 | #define TXPKTRDY 0x2 /* data packet in FIFO indicator */ |
| 892 | #define nTXPKTRDY 0x0 |
| 893 | #define STALL_SENT 0x4 /* STALL handshake sent */ |
| 894 | #define nSTALL_SENT 0x0 |
| 895 | #define DATAEND 0x8 /* Data end indicator */ |
| 896 | #define nDATAEND 0x0 |
| 897 | #define SETUPEND 0x10 /* Setup end */ |
| 898 | #define nSETUPEND 0x0 |
| 899 | #define SENDSTALL 0x20 /* Send STALL handshake */ |
| 900 | #define nSENDSTALL 0x0 |
| 901 | #define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */ |
| 902 | #define nSERVICED_RXPKTRDY 0x0 |
| 903 | #define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */ |
| 904 | #define nSERVICED_SETUPEND 0x0 |
| 905 | #define FLUSHFIFO 0x100 /* flush endpoint FIFO */ |
| 906 | #define nFLUSHFIFO 0x0 |
| 907 | #define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */ |
| 908 | #define nSTALL_RECEIVED_H 0x0 |
| 909 | #define SETUPPKT_H 0x8 /* send Setup token host mode */ |
| 910 | #define nSETUPPKT_H 0x0 |
| 911 | #define ERROR_H 0x10 /* timeout error indicator host mode */ |
| 912 | #define nERROR_H 0x0 |
| 913 | #define REQPKT_H 0x20 /* Request an IN transaction host mode */ |
| 914 | #define nREQPKT_H 0x0 |
| 915 | #define STATUSPKT_H 0x40 /* Status stage transaction host mode */ |
| 916 | #define nSTATUSPKT_H 0x0 |
| 917 | #define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */ |
| 918 | #define nNAK_TIMEOUT_H 0x0 |
| 919 | |
| 920 | /* Bit masks for USB_COUNT0 */ |
| 921 | |
| 922 | #define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */ |
| 923 | |
| 924 | /* Bit masks for USB_NAKLIMIT0 */ |
| 925 | |
| 926 | #define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */ |
| 927 | |
| 928 | /* Bit masks for USB_TX_MAX_PACKET */ |
| 929 | |
| 930 | #define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */ |
| 931 | |
| 932 | /* Bit masks for USB_RX_MAX_PACKET */ |
| 933 | |
| 934 | #define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */ |
| 935 | |
| 936 | /* Bit masks for USB_TXCSR */ |
| 937 | |
| 938 | #define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */ |
| 939 | #define nTXPKTRDY_T 0x0 |
| 940 | #define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */ |
| 941 | #define nFIFO_NOT_EMPTY_T 0x0 |
| 942 | #define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */ |
| 943 | #define nUNDERRUN_T 0x0 |
| 944 | #define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */ |
| 945 | #define nFLUSHFIFO_T 0x0 |
| 946 | #define STALL_SEND_T 0x10 /* issue a Stall handshake */ |
| 947 | #define nSTALL_SEND_T 0x0 |
| 948 | #define STALL_SENT_T 0x20 /* Stall handshake transmitted */ |
| 949 | #define nSTALL_SENT_T 0x0 |
| 950 | #define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */ |
| 951 | #define nCLEAR_DATATOGGLE_T 0x0 |
| 952 | #define INCOMPTX_T 0x80 /* indicates that a large packet is split */ |
| 953 | #define nINCOMPTX_T 0x0 |
| 954 | #define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */ |
| 955 | #define nDMAREQMODE_T 0x0 |
| 956 | #define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */ |
| 957 | #define nFORCE_DATATOGGLE_T 0x0 |
| 958 | #define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */ |
| 959 | #define nDMAREQ_ENA_T 0x0 |
| 960 | #define ISO_T 0x4000 /* enable Isochronous transfers */ |
| 961 | #define nISO_T 0x0 |
| 962 | #define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */ |
| 963 | #define nAUTOSET_T 0x0 |
| 964 | #define ERROR_TH 0x4 /* error condition host mode */ |
| 965 | #define nERROR_TH 0x0 |
| 966 | #define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */ |
| 967 | #define nSTALL_RECEIVED_TH 0x0 |
| 968 | #define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */ |
| 969 | #define nNAK_TIMEOUT_TH 0x0 |
| 970 | |
| 971 | /* Bit masks for USB_TXCOUNT */ |
| 972 | |
| 973 | #define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */ |
| 974 | |
| 975 | /* Bit masks for USB_RXCSR */ |
| 976 | |
| 977 | #define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */ |
| 978 | #define nRXPKTRDY_R 0x0 |
| 979 | #define FIFO_FULL_R 0x2 /* FIFO not empty */ |
| 980 | #define nFIFO_FULL_R 0x0 |
| 981 | #define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */ |
| 982 | #define nOVERRUN_R 0x0 |
| 983 | #define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */ |
| 984 | #define nDATAERROR_R 0x0 |
| 985 | #define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */ |
| 986 | #define nFLUSHFIFO_R 0x0 |
| 987 | #define STALL_SEND_R 0x20 /* issue a Stall handshake */ |
| 988 | #define nSTALL_SEND_R 0x0 |
| 989 | #define STALL_SENT_R 0x40 /* Stall handshake transmitted */ |
| 990 | #define nSTALL_SENT_R 0x0 |
| 991 | #define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */ |
| 992 | #define nCLEAR_DATATOGGLE_R 0x0 |
| 993 | #define INCOMPRX_R 0x100 /* indicates that a large packet is split */ |
| 994 | #define nINCOMPRX_R 0x0 |
| 995 | #define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */ |
| 996 | #define nDMAREQMODE_R 0x0 |
| 997 | #define DISNYET_R 0x1000 /* disable Nyet handshakes */ |
| 998 | #define nDISNYET_R 0x0 |
| 999 | #define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */ |
| 1000 | #define nDMAREQ_ENA_R 0x0 |
| 1001 | #define ISO_R 0x4000 /* enable Isochronous transfers */ |
| 1002 | #define nISO_R 0x0 |
| 1003 | #define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */ |
| 1004 | #define nAUTOCLEAR_R 0x0 |
| 1005 | #define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */ |
| 1006 | #define nERROR_RH 0x0 |
| 1007 | #define REQPKT_RH 0x20 /* request an IN transaction host mode */ |
| 1008 | #define nREQPKT_RH 0x0 |
| 1009 | #define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */ |
| 1010 | #define nSTALL_RECEIVED_RH 0x0 |
| 1011 | #define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */ |
| 1012 | #define nINCOMPRX_RH 0x0 |
| 1013 | #define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */ |
| 1014 | #define nDMAREQMODE_RH 0x0 |
| 1015 | #define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */ |
| 1016 | #define nAUTOREQ_RH 0x0 |
| 1017 | |
| 1018 | /* Bit masks for USB_RXCOUNT */ |
| 1019 | |
| 1020 | #define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */ |
| 1021 | |
| 1022 | /* Bit masks for USB_TXTYPE */ |
| 1023 | |
| 1024 | #define TARGET_EP_NO_T 0xf /* EP number */ |
| 1025 | #define PROTOCOL_T 0xc /* transfer type */ |
| 1026 | |
| 1027 | /* Bit masks for USB_TXINTERVAL */ |
| 1028 | |
| 1029 | #define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */ |
| 1030 | |
| 1031 | /* Bit masks for USB_RXTYPE */ |
| 1032 | |
| 1033 | #define TARGET_EP_NO_R 0xf /* EP number */ |
| 1034 | #define PROTOCOL_R 0xc /* transfer type */ |
| 1035 | |
| 1036 | /* Bit masks for USB_RXINTERVAL */ |
| 1037 | |
| 1038 | #define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */ |
| 1039 | |
| 1040 | /* Bit masks for USB_DMA_INTERRUPT */ |
| 1041 | |
| 1042 | #define DMA0_INT 0x1 /* DMA0 pending interrupt */ |
| 1043 | #define nDMA0_INT 0x0 |
| 1044 | #define DMA1_INT 0x2 /* DMA1 pending interrupt */ |
| 1045 | #define nDMA1_INT 0x0 |
| 1046 | #define DMA2_INT 0x4 /* DMA2 pending interrupt */ |
| 1047 | #define nDMA2_INT 0x0 |
| 1048 | #define DMA3_INT 0x8 /* DMA3 pending interrupt */ |
| 1049 | #define nDMA3_INT 0x0 |
| 1050 | #define DMA4_INT 0x10 /* DMA4 pending interrupt */ |
| 1051 | #define nDMA4_INT 0x0 |
| 1052 | #define DMA5_INT 0x20 /* DMA5 pending interrupt */ |
| 1053 | #define nDMA5_INT 0x0 |
| 1054 | #define DMA6_INT 0x40 /* DMA6 pending interrupt */ |
| 1055 | #define nDMA6_INT 0x0 |
| 1056 | #define DMA7_INT 0x80 /* DMA7 pending interrupt */ |
| 1057 | #define nDMA7_INT 0x0 |
| 1058 | |
| 1059 | /* Bit masks for USB_DMAxCONTROL */ |
| 1060 | |
| 1061 | #define DMA_ENA 0x1 /* DMA enable */ |
| 1062 | #define nDMA_ENA 0x0 |
| 1063 | #define DIRECTION 0x2 /* direction of DMA transfer */ |
| 1064 | #define nDIRECTION 0x0 |
| 1065 | #define MODE 0x4 /* DMA Bus error */ |
| 1066 | #define nMODE 0x0 |
| 1067 | #define INT_ENA 0x8 /* Interrupt enable */ |
| 1068 | #define nINT_ENA 0x0 |
| 1069 | #define EPNUM 0xf0 /* EP number */ |
| 1070 | #define BUSERROR 0x100 /* DMA Bus error */ |
| 1071 | #define nBUSERROR 0x0 |
| 1072 | |
| 1073 | /* Bit masks for USB_DMAxADDRHIGH */ |
| 1074 | |
| 1075 | #define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */ |
| 1076 | |
| 1077 | /* Bit masks for USB_DMAxADDRLOW */ |
| 1078 | |
| 1079 | #define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */ |
| 1080 | |
| 1081 | /* Bit masks for USB_DMAxCOUNTHIGH */ |
| 1082 | |
| 1083 | #define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */ |
| 1084 | |
| 1085 | /* Bit masks for USB_DMAxCOUNTLOW */ |
| 1086 | |
| 1087 | #define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */ |
| 1088 | |
| 1089 | #endif /* _DEF_BF527_H */ |