blob: 158ddb79821da36168bb9c00a1e711bf5c17286a [file] [log] [blame]
Richard Cochran2b8f0112011-09-28 15:16:41 +02001/*
2 * arch/arm/mach-ixp4xx/omixp-setup.c
3 *
4 * omicron ixp4xx board setup
5 * Copyright (C) 2009 OMICRON electronics GmbH
6 *
7 * based nslu2-setup.c, ixdp425-setup.c:
8 * Copyright (C) 2003-2004 MontaVista Software, Inc.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13 */
14
15#include <linux/kernel.h>
16#include <linux/serial.h>
17#include <linux/serial_8250.h>
18#include <linux/mtd/mtd.h>
19#include <linux/mtd/partitions.h>
20#ifdef CONFIG_LEDS_CLASS
21#include <linux/leds.h>
22#endif
23
24#include <asm/setup.h>
25#include <asm/memory.h>
26#include <asm/mach-types.h>
27#include <asm/mach/arch.h>
28#include <asm/mach/flash.h>
29
30static struct resource omixp_flash_resources[] = {
31 {
32 .flags = IORESOURCE_MEM,
33 }, {
34 .flags = IORESOURCE_MEM,
35 },
36};
37
38static struct mtd_partition omixp_partitions[] = {
39 {
40 .name = "Recovery Bootloader",
41 .size = 0x00020000,
42 .offset = 0,
43 }, {
44 .name = "Calibration Data",
45 .size = 0x00020000,
46 .offset = 0x00020000,
47 }, {
48 .name = "Recovery FPGA",
49 .size = 0x00020000,
50 .offset = 0x00040000,
51 }, {
52 .name = "Release Bootloader",
53 .size = 0x00020000,
54 .offset = 0x00060000,
55 }, {
56 .name = "Release FPGA",
57 .size = 0x00020000,
58 .offset = 0x00080000,
59 }, {
60 .name = "Kernel",
61 .size = 0x00160000,
62 .offset = 0x000a0000,
63 }, {
64 .name = "Filesystem",
65 .size = 0x00C00000,
66 .offset = 0x00200000,
67 }, {
68 .name = "Persistent Storage",
69 .size = 0x00200000,
70 .offset = 0x00E00000,
71 },
72};
73
74static struct flash_platform_data omixp_flash_data[] = {
75 {
76 .map_name = "cfi_probe",
77 .parts = omixp_partitions,
78 .nr_parts = ARRAY_SIZE(omixp_partitions),
79 }, {
80 .map_name = "cfi_probe",
81 .parts = NULL,
82 .nr_parts = 0,
83 },
84};
85
86static struct platform_device omixp_flash_device[] = {
87 {
88 .name = "IXP4XX-Flash",
89 .id = 0,
90 .dev = {
91 .platform_data = &omixp_flash_data[0],
92 },
93 .resource = &omixp_flash_resources[0],
94 .num_resources = 1,
95 }, {
96 .name = "IXP4XX-Flash",
97 .id = 1,
98 .dev = {
99 .platform_data = &omixp_flash_data[1],
100 },
101 .resource = &omixp_flash_resources[1],
102 .num_resources = 1,
103 },
104};
105
106/* Swap UART's - These boards have the console on UART2. The following
107 * configuration is used:
108 * ttyS0 .. UART2
109 * ttyS1 .. UART1
110 * This way standard images can be used with the kernel that expect
111 * the console on ttyS0.
112 */
113static struct resource omixp_uart_resources[] = {
114 {
115 .start = IXP4XX_UART2_BASE_PHYS,
116 .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
117 .flags = IORESOURCE_MEM,
118 }, {
119 .start = IXP4XX_UART1_BASE_PHYS,
120 .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
121 .flags = IORESOURCE_MEM,
122 },
123};
124
125static struct plat_serial8250_port omixp_uart_data[] = {
126 {
127 .mapbase = IXP4XX_UART2_BASE_PHYS,
128 .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
129 .irq = IRQ_IXP4XX_UART2,
130 .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
131 .iotype = UPIO_MEM,
132 .regshift = 2,
133 .uartclk = IXP4XX_UART_XTAL,
134 }, {
135 .mapbase = IXP4XX_UART1_BASE_PHYS,
136 .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
137 .irq = IRQ_IXP4XX_UART1,
138 .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
139 .iotype = UPIO_MEM,
140 .regshift = 2,
141 .uartclk = IXP4XX_UART_XTAL,
142 }, {
143 /* list termination */
144 }
145};
146
147static struct platform_device omixp_uart = {
148 .name = "serial8250",
149 .id = PLAT8250_DEV_PLATFORM,
150 .dev.platform_data = omixp_uart_data,
151 .num_resources = 2,
152 .resource = omixp_uart_resources,
153};
154
155static struct gpio_led mic256_led_pins[] = {
156 {
157 .name = "LED-A",
158 .gpio = 7,
159 },
160};
161
162static struct gpio_led_platform_data mic256_led_data = {
163 .num_leds = ARRAY_SIZE(mic256_led_pins),
164 .leds = mic256_led_pins,
165};
166
167static struct platform_device mic256_leds = {
168 .name = "leds-gpio",
169 .id = -1,
170 .dev.platform_data = &mic256_led_data,
171};
172
173/* Built-in 10/100 Ethernet MAC interfaces */
174static struct eth_plat_info ixdp425_plat_eth[] = {
175 {
176 .phy = 0,
177 .rxq = 3,
178 .txreadyq = 20,
179 }, {
180 .phy = 1,
181 .rxq = 4,
182 .txreadyq = 21,
183 },
184};
185
186static struct platform_device ixdp425_eth[] = {
187 {
188 .name = "ixp4xx_eth",
189 .id = IXP4XX_ETH_NPEB,
190 .dev.platform_data = ixdp425_plat_eth,
191 }, {
192 .name = "ixp4xx_eth",
193 .id = IXP4XX_ETH_NPEC,
194 .dev.platform_data = ixdp425_plat_eth + 1,
195 },
196};
197
198
199static struct platform_device *devixp_pldev[] __initdata = {
200 &omixp_uart,
201 &omixp_flash_device[0],
202 &ixdp425_eth[0],
203 &ixdp425_eth[1],
204};
205
206static struct platform_device *mic256_pldev[] __initdata = {
207 &omixp_uart,
208 &omixp_flash_device[0],
209 &mic256_leds,
210 &ixdp425_eth[0],
211 &ixdp425_eth[1],
212};
213
214static struct platform_device *miccpt_pldev[] __initdata = {
215 &omixp_uart,
216 &omixp_flash_device[0],
217 &omixp_flash_device[1],
218 &ixdp425_eth[0],
219 &ixdp425_eth[1],
220};
221
222static void __init omixp_init(void)
223{
224 ixp4xx_sys_init();
225
226 /* 16MiB Boot Flash */
227 omixp_flash_resources[0].start = IXP4XX_EXP_BUS_BASE(0);
228 omixp_flash_resources[0].end = IXP4XX_EXP_BUS_END(0);
229
230 /* 32 MiB Data Flash */
231 omixp_flash_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
232 omixp_flash_resources[1].end = IXP4XX_EXP_BUS_END(2);
233
234 if (machine_is_devixp())
235 platform_add_devices(devixp_pldev, ARRAY_SIZE(devixp_pldev));
236 else if (machine_is_miccpt())
237 platform_add_devices(miccpt_pldev, ARRAY_SIZE(miccpt_pldev));
238 else if (machine_is_mic256())
239 platform_add_devices(mic256_pldev, ARRAY_SIZE(mic256_pldev));
240}
241
242#ifdef CONFIG_MACH_DEVIXP
243MACHINE_START(DEVIXP, "Omicron DEVIXP")
Arnd Bergmanna7fadac2011-10-31 23:58:06 +0100244 .atag_offset = 0x100,
Richard Cochran2b8f0112011-09-28 15:16:41 +0200245 .map_io = ixp4xx_map_io,
Rob Herringf4495882012-03-06 15:01:53 -0600246 .init_early = ixp4xx_init_early,
Richard Cochran2b8f0112011-09-28 15:16:41 +0200247 .init_irq = ixp4xx_init_irq,
248 .timer = &ixp4xx_timer,
249 .init_machine = omixp_init,
Russell Kingd1b860f2011-11-05 12:10:55 +0000250 .restart = ixp4xx_restart,
Richard Cochran2b8f0112011-09-28 15:16:41 +0200251MACHINE_END
252#endif
253
254#ifdef CONFIG_MACH_MICCPT
255MACHINE_START(MICCPT, "Omicron MICCPT")
Arnd Bergmanna7fadac2011-10-31 23:58:06 +0100256 .atag_offset = 0x100,
Richard Cochran2b8f0112011-09-28 15:16:41 +0200257 .map_io = ixp4xx_map_io,
Rob Herringf4495882012-03-06 15:01:53 -0600258 .init_early = ixp4xx_init_early,
Richard Cochran2b8f0112011-09-28 15:16:41 +0200259 .init_irq = ixp4xx_init_irq,
260 .timer = &ixp4xx_timer,
261 .init_machine = omixp_init,
262#if defined(CONFIG_PCI)
263 .dma_zone_size = SZ_64M,
264#endif
Russell Kingd1b860f2011-11-05 12:10:55 +0000265 .restart = ixp4xx_restart,
Richard Cochran2b8f0112011-09-28 15:16:41 +0200266MACHINE_END
267#endif
268
269#ifdef CONFIG_MACH_MIC256
270MACHINE_START(MIC256, "Omicron MIC256")
Arnd Bergmanna7fadac2011-10-31 23:58:06 +0100271 .atag_offset = 0x100,
Richard Cochran2b8f0112011-09-28 15:16:41 +0200272 .map_io = ixp4xx_map_io,
Rob Herringf4495882012-03-06 15:01:53 -0600273 .init_early = ixp4xx_init_early,
Richard Cochran2b8f0112011-09-28 15:16:41 +0200274 .init_irq = ixp4xx_init_irq,
275 .timer = &ixp4xx_timer,
276 .init_machine = omixp_init,
Russell Kingd1b860f2011-11-05 12:10:55 +0000277 .restart = ixp4xx_restart,
Richard Cochran2b8f0112011-09-28 15:16:41 +0200278MACHINE_END
279#endif