blob: 30584b194984d12005e91b82d21204c5068e91aa [file] [log] [blame]
Mauro Carvalho Chehabe53dd082007-09-15 07:38:47 -03001 Kernel Parameters
2 ~~~~~~~~~~~~~~~~~
Linus Torvalds1da177e2005-04-16 15:20:36 -07003
4The following is a consolidated list of the kernel parameters as implemented
5(mostly) by the __setup() macro and sorted into English Dictionary order
6(defined as ignoring all punctuation and sorting digits before letters in a
7case insensitive manner), and with descriptions where known.
8
9Module parameters for loadable modules are specified only as the
10parameter name with optional '=' and value as appropriate, such as:
11
12 modprobe usbcore blinkenlights=1
13
14Module parameters for modules that are built into the kernel image
15are specified on the kernel command line with the module name plus
16'.' plus parameter name, with '=' and value if appropriate, such as:
17
18 usbcore.blinkenlights=1
19
Randy Dunlapca1eda22009-05-06 16:02:58 -070020Hyphens (dashes) and underscores are equivalent in parameter names, so
21 log_buf_len=1M print-fatal-signals=1
22can also be entered as
23 log-buf-len=1M print_fatal_signals=1
24
25
Stefan Richtera901ebb2006-04-01 01:43:18 +020026This document may not be entirely up to date and comprehensive. The command
27"modinfo -p ${modulename}" shows a current list of all parameters of a loadable
28module. Loadable modules, after being loaded into the running kernel, also
29reveal their parameters in /sys/module/${modulename}/parameters/. Some of these
30parameters may be changed at runtime by the command
31"echo -n ${value} > /sys/module/${modulename}/parameters/${parm}".
32
Stefan Richter6585fa82006-04-01 01:44:30 +020033The parameters listed below are only valid if certain kernel build options were
34enabled and if respective hardware is present. The text in square brackets at
35the beginning of each description states the restrictions within which a
36parameter is applicable:
Linus Torvalds1da177e2005-04-16 15:20:36 -070037
38 ACPI ACPI support is enabled.
Chuck Ebbertc99c1082007-07-27 10:46:20 +100039 AGP AGP (Accelerated Graphics Port) is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -070040 ALSA ALSA sound support is enabled.
41 APIC APIC support is enabled.
42 APM Advanced Power Management support is enabled.
Randy Dunlap16290242011-08-13 12:34:52 -070043 ARM ARM architecture is enabled.
Haavard Skinnemoene7ba1762007-10-10 14:58:29 +020044 AVR32 AVR32 architecture is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -070045 AX25 Appropriate AX.25 support is enabled.
Robin Getz0ae53642007-10-09 17:24:49 +080046 BLACKFIN Blackfin architecture is enabled.
Olof Johansson1e435252013-04-27 14:10:18 -070047 CLK Common clock infrastructure is enabled.
Robert Tivy5c71d612013-03-28 18:41:46 -070048 CMA Contiguous Memory Area support is enabled.
Alan Cox9cfe2682011-01-25 14:18:38 +000049 DRM Direct Rendering Management support is enabled.
50 DYNAMIC_DEBUG Build in debug messages and enable them at runtime
Linus Torvalds1da177e2005-04-16 15:20:36 -070051 EDD BIOS Enhanced Disk Drive Services (EDD) is enabled
52 EFI EFI Partitioning (GPT) is enabled
53 EIDE EIDE/ATAPI support is enabled.
Mimi Zohar7102ebc2011-05-12 18:33:20 -040054 EVM Extended Verification Module
Linus Torvalds1da177e2005-04-16 15:20:36 -070055 FB The frame buffer device is enabled.
Randy Dunlap16290242011-08-13 12:34:52 -070056 FTRACE Function tracing enabled.
Peter Oberparleiter2521f2c2009-06-17 16:28:08 -070057 GCOV GCOV profiling is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -070058 HW Appropriate hardware is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -070059 IA-64 IA-64 architecture is enabled.
Mimi Zohar6146f0d2009-02-04 09:06:57 -050060 IMA Integrity measurement architecture is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -070061 IOSCHED More than one I/O scheduler is enabled.
Adrian Bunk41e2e8b2005-07-12 13:58:33 -070062 IP_PNP IP DHCP, BOOTP, or RARP is enabled.
Brian Haleyb0f83b22010-02-04 13:36:50 -080063 IPV6 IPv6 support is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -070064 ISAPNP ISA PnP code is enabled.
65 ISDN Appropriate ISDN support is enabled.
66 JOY Appropriate joystick support is enabled.
Jason Wessel84c08fd2010-05-20 21:04:24 -050067 KGDB Kernel debugger support is enabled.
Andre Przywarafef07aa2009-07-10 14:20:35 +020068 KVM Kernel Virtual Machine support is enabled.
Kristen Carlson Accardi11ef6972006-09-28 11:29:01 -070069 LIBATA Libata driver is enabled
Linus Torvalds1da177e2005-04-16 15:20:36 -070070 LP Printer support is enabled.
71 LOOP Loopback device support is enabled.
72 M68k M68k architecture is enabled.
73 These options have more detailed description inside of
74 Documentation/m68k/kernel-options.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -070075 MDA MDA console support is enabled.
Randy Dunlap16290242011-08-13 12:34:52 -070076 MIPS MIPS architecture is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -070077 MOUSE Appropriate mouse support is enabled.
Matthew Wilcox309e57d2006-03-05 22:33:34 -070078 MSI Message Signaled Interrupts (PCI).
Randy Dunlapc8facbb2007-07-31 00:37:40 -070079 MTD MTD (Memory Technology Device) support is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -070080 NET Appropriate network support is enabled.
81 NUMA NUMA support is enabled.
82 NFS Appropriate NFS support is enabled.
83 OSS OSS sound support is enabled.
Randy Dunlapc8facbb2007-07-31 00:37:40 -070084 PV_OPS A paravirtualized kernel is enabled.
85 PARIDE The ParIDE (parallel port IDE) subsystem is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -070086 PARISC The PA-RISC architecture is enabled.
87 PCI PCI bus support is enabled.
Randy Dunlap7f785762007-10-05 13:17:58 -070088 PCIE PCI Express support is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -070089 PCMCIA The PCMCIA subsystem is enabled.
90 PNP Plug & Play support is enabled.
91 PPC PowerPC architecture is enabled.
92 PPT Parallel port support is enabled.
93 PS2 Appropriate PS/2 support is enabled.
94 RAM RAM disk support is enabled.
95 S390 S390 architecture is enabled.
96 SCSI Appropriate SCSI support is enabled.
Randy Dunlap163475f2010-08-14 12:36:14 -070097 A lot of drivers have their options described inside
98 the Documentation/scsi/ sub-directory.
James Morris20510f22007-10-16 23:31:32 -070099 SECURITY Different security models are enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700100 SELINUX SELinux support is enabled.
John Johansenc1c124e2010-07-29 14:48:09 -0700101 APPARMOR AppArmor support is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700102 SERIAL Serial support is enabled.
Paul Mundte523d932007-02-28 18:30:01 +0900103 SH SuperH architecture is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700104 SMP The kernel is an SMP kernel.
105 SPARC Sparc architecture is enabled.
David Brownell77437fd2008-07-23 21:28:33 -0700106 SWSUSP Software suspend (hibernation) is enabled.
107 SUSPEND System suspend states are enabled.
Rajiv Andrade225a9be2010-03-25 00:55:32 -0300108 TPM TPM drivers are enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700109 TS Appropriate touchscreen support is enabled.
Alan Sternd4f373e2008-11-10 14:07:45 -0500110 UMS USB Mass Storage support is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700111 USB USB support is enabled.
112 USBHID USB Human Interface Device support is enabled.
113 V4L Video For Linux support is enabled.
Pawel Moll81a054c2012-05-09 18:30:16 +0100114 VMMIO Driver for memory mapped virtio devices is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700115 VGA The VGA console has been enabled.
116 VT Virtual terminal support is enabled.
117 WDT Watchdog support is enabled.
118 XT IBM PC/XT MFM hard disk support is enabled.
Alan Coxcd4f0ef2007-07-31 00:37:59 -0700119 X86-32 X86-32, aka i386 architecture is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700120 X86-64 X86-64 architecture is enabled.
121 More X86-64 boot options can be found in
Uwe Hermann71cced62008-10-20 09:32:21 -0700122 Documentation/x86/x86_64/boot-options.txt .
Randy Dunlap16290242011-08-13 12:34:52 -0700123 X86 Either 32-bit or 64-bit x86 (same as X86-32+X86-64)
Stefano Stabellinic1c54132010-05-14 12:44:30 +0100124 XEN Xen support is enabled
Linus Torvalds1da177e2005-04-16 15:20:36 -0700125
126In addition, the following text indicates that the option:
127
128 BUGS= Relates to possible processor bugs on the said processor.
129 KNL Is a kernel start-up parameter.
130 BOOT Is a boot loader parameter.
131
132Parameters denoted with BOOT are actually interpreted by the boot
133loader, and have no meaning to the kernel directly.
134Do not modify the syntax of boot loader parameters without extreme
Kyle McMartin954a8b82009-02-19 16:48:14 -0500135need or coordination with <Documentation/x86/boot.txt>.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700136
Karsten Weiss55588702007-02-13 13:26:21 +0100137There are also arch-specific kernel-parameters not documented here.
Uwe Hermann71cced62008-10-20 09:32:21 -0700138See for example <Documentation/x86/x86_64/boot-options.txt>.
Karsten Weiss55588702007-02-13 13:26:21 +0100139
Linus Torvalds1da177e2005-04-16 15:20:36 -0700140Note that ALL kernel parameters listed below are CASE SENSITIVE, and that
141a trailing = on the name of any parameter states that that parameter will
142be entered as an environment variable, whereas its absence indicates that
143it will appear as a kernel argument readable via /proc/cmdline by programs
144running once the system is up.
145
jens m. noedler9c4751f2006-09-29 02:00:27 -0700146The number of kernel parameters is not limited, but the length of the
147complete command line (parameters including spaces etc.) is limited to
148a fixed number of characters. This limit depends on the architecture
149and is between 256 and 4096 characters. It is defined in the file
150./include/asm/setup.h as COMMAND_LINE_SIZE.
151
Ahmed S. Darwish7a19a232011-02-20 20:08:35 -0800152Finally, the [KMG] suffix is commonly described after a number of kernel
153parameter values. These 'K', 'M', and 'G' letters represent the _binary_
154multipliers 'Kilo', 'Mega', and 'Giga', equalling 2^10, 2^20, and 2^30
155bytes respectively. Such letter suffixes can also be entirely omitted.
156
jens m. noedler9c4751f2006-09-29 02:00:27 -0700157
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +0530158 acpi= [HW,ACPI,X86]
Bernhard Walle03d926f2007-03-06 02:29:44 -0800159 Advanced Configuration and Power Interface
Len Brown68ca4062010-02-19 00:09:22 -0500160 Format: { force | off | strict | noirq | rsdt }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700161 force -- enable ACPI if default was off
162 off -- disable ACPI if default was on
163 noirq -- do not use ACPI for IRQ routing
Randy Dunlapa9913042005-10-23 12:57:11 -0700164 strict -- Be less tolerant of platforms that are not
Linus Torvalds1da177e2005-04-16 15:20:36 -0700165 strictly ACPI specification compliant.
Zhao Yakui237889b2008-12-17 16:55:18 +0800166 rsdt -- prefer RSDT over (default) XSDT
Lin Mingaa2110c2010-04-08 14:34:27 +0800167 copy_dsdt -- copy DSDT to memory
Linus Torvalds1da177e2005-04-16 15:20:36 -0700168
Paul Bolle395cf962011-08-15 02:02:26 +0200169 See also Documentation/power/runtime_pm.txt, pci=noacpi
Linus Torvalds1da177e2005-04-16 15:20:36 -0700170
Takao Indoh4996c022011-07-14 18:05:21 -0400171 acpi_rsdp= [ACPI,EFI,KEXEC]
172 Pass the RSDP address to the kernel, mostly used
173 on machines running EFI runtime service to boot the
174 second kernel for kdump.
175
Len Browna1fdcc02007-03-11 03:26:14 -0400176 acpi_apic_instance= [ACPI, IOAPIC]
177 Format: <int>
178 2: use 2nd APIC table, if available
179 1,0: use 1st APIC table
Len Brown4e381a42007-03-30 14:16:10 -0400180 default: 0
Len Browna1fdcc02007-03-11 03:26:14 -0400181
Thomas Renningerc3d6de62008-08-01 17:37:55 +0200182 acpi_backlight= [HW,ACPI]
183 acpi_backlight=vendor
184 acpi_backlight=video
185 If set to vendor, prefer vendor specific driver
186 (e.g. thinkpad_acpi, sony_acpi, etc.) instead
187 of the ACPI video.ko driver.
188
Bjorn Helgaasa0d84a92008-11-07 16:58:05 -0700189 acpi.debug_layer= [HW,ACPI,ACPI_DEBUG]
190 acpi.debug_level= [HW,ACPI,ACPI_DEBUG]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700191 Format: <int>
Bjorn Helgaasa0d84a92008-11-07 16:58:05 -0700192 CONFIG_ACPI_DEBUG must be enabled to produce any ACPI
193 debug output. Bits in debug_layer correspond to a
194 _COMPONENT in an ACPI source file, e.g.,
195 #define _COMPONENT ACPI_PCI_COMPONENT
196 Bits in debug_level correspond to a level in
197 ACPI_DEBUG_PRINT statements, e.g.,
198 ACPI_DEBUG_PRINT((ACPI_DB_INFO, ...
Bjorn Helgaase76f4272008-11-13 17:30:13 -0600199 The debug_level mask defaults to "info". See
200 Documentation/acpi/debug.txt for more information about
201 debug layers and levels.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700202
Bjorn Helgaase76f4272008-11-13 17:30:13 -0600203 Enable processor driver info messages:
204 acpi.debug_layer=0x20000000
205 Enable PCI/PCI interrupt routing info messages:
206 acpi.debug_layer=0x400000
Bjorn Helgaasa0d84a92008-11-07 16:58:05 -0700207 Enable AML "Debug" output, i.e., stores to the Debug
208 object while interpreting AML:
209 acpi.debug_layer=0xffffffff acpi.debug_level=0x2
Bjorn Helgaasa0d84a92008-11-07 16:58:05 -0700210 Enable all messages related to ACPI hardware:
211 acpi.debug_layer=0x2 acpi.debug_level=0xffffffff
Thomas Renninger36eec5e2008-08-11 15:03:20 +0200212
Bjorn Helgaasa0d84a92008-11-07 16:58:05 -0700213 Some values produce so much output that the system is
214 unusable. The "log_buf_len" parameter may be useful
215 if you need to capture more output.
Zhang Ruif9891062007-04-24 13:53:22 +0800216
Randy Dunlap0cb55ad2009-04-05 15:55:22 -0700217 acpi_irq_balance [HW,ACPI]
218 ACPI will balance active IRQs
219 default in APIC mode
220
221 acpi_irq_nobalance [HW,ACPI]
222 ACPI will not move active IRQs (default)
223 default in PIC mode
224
225 acpi_irq_isa= [HW,ACPI] If irq_balance, mark listed IRQs used by ISA
226 Format: <irq>,<irq>...
227
228 acpi_irq_pci= [HW,ACPI] If irq_balance, clear listed IRQs for
229 use by PCI
230 Format: <irq>,<irq>...
231
232 acpi_no_auto_ssdt [HW,ACPI] Disable automatic loading of SSDT
233
234 acpi_os_name= [HW,ACPI] Tell ACPI BIOS the name of the OS
235 Format: To spoof as Windows 98: ="Microsoft Windows"
236
237 acpi_osi= [HW,ACPI] Modify list of supported OS interface strings
238 acpi_osi="string1" # add string1 -- only one string
239 acpi_osi="!string2" # remove built-in string2
240 acpi_osi= # disable all strings
241
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +0530242 acpi_pm_good [X86]
Randy Dunlap0cb55ad2009-04-05 15:55:22 -0700243 Override the pmtimer bug detection: force the kernel
244 to assume that this machine's pmtimer latches its value
245 and always returns good values.
246
Randy Dunlap4af94f32009-04-17 18:30:28 -0700247 acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode
248 Format: { level | edge | high | low }
249
250 acpi_serialize [HW,ACPI] force serialization of AML methods
251
252 acpi_skip_timer_override [HW,ACPI]
253 Recognize and ignore IRQ0/pin2 Interrupt Override.
254 For broken nForce2 BIOS resulting in XT-PIC timer.
255
256 acpi_sleep= [HW,ACPI] Sleep options
257 Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig,
Amerigo Wangc3b07952011-05-10 21:09:38 +0200258 old_ordering, nonvs, sci_force_enable }
Randy Dunlap4af94f32009-04-17 18:30:28 -0700259 See Documentation/power/video.txt for information on
260 s3_bios and s3_mode.
261 s3_beep is for debugging; it makes the PC's speaker beep
262 as soon as the kernel's real-mode entry point is called.
263 s4_nohwsig prevents ACPI hardware signature from being
264 used during resume from hibernation.
265 old_ordering causes the ACPI 1.0 ordering of the _PTS
266 control method, with respect to putting devices into
267 low power states, to be enforced (the ACPI 2.0 ordering
268 of _PTS is used by default).
Rafael J. Wysocki72ad5d72010-07-23 22:59:09 +0200269 nonvs prevents the kernel from saving/restoring the
270 ACPI NVS memory during suspend/hibernation and resume.
Zhang Ruid7f0eea2009-12-30 15:36:42 +0800271 sci_force_enable causes the kernel to set SCI_EN directly
272 on resume from S1/S3 (which is against the ACPI spec,
273 but some broken systems don't work without it).
Randy Dunlap4af94f32009-04-17 18:30:28 -0700274
275 acpi_use_timer_override [HW,ACPI]
276 Use timer override. For some broken Nvidia NF5 boards
277 that require a timer override, but don't have HPET
278
Luca Tettamanti7e905602009-03-30 00:01:27 +0200279 acpi_enforce_resources= [ACPI]
280 { strict | lax | no }
281 Check for resource conflicts between native drivers
282 and ACPI OperationRegions (SystemIO and SystemMemory
283 only). IO ports and memory declared in ACPI might be
284 used by the ACPI subsystem in arbitrary AML code and
285 can interfere with legacy drivers.
286 strict (default): access to resources claimed by ACPI
287 is denied; legacy drivers trying to access reserved
288 resources will fail to bind to device using them.
289 lax: access to resources claimed by ACPI is allowed;
290 legacy drivers trying to access reserved resources
291 will bind successfully but a warning message is logged.
292 no: ACPI OperationRegions are not marked as reserved,
293 no further checks are performed.
294
Randy Dunlap4af94f32009-04-17 18:30:28 -0700295 add_efi_memmap [EFI; X86] Include EFI memory map in
296 kernel's map of available physical RAM.
297
Randy Dunlap0cb55ad2009-04-05 15:55:22 -0700298 agp= [AGP]
299 { off | try_unsupported }
300 off: disable AGP support
301 try_unsupported: try to drive unsupported chipsets
302 (may crash computer or cause data corruption)
303
Randy Dunlapbcfde332010-06-07 17:10:38 -0700304 ALSA [HW,ALSA]
305 See Documentation/sound/alsa/alsa-parameters.txt
306
Russell Kingd944d542010-02-20 16:13:29 +0000307 alignment= [KNL,ARM]
308 Allow the default userspace alignment fault handler
309 behaviour to be specified. Bit 0 enables warnings,
310 bit 1 enables fixups, and bit 2 sends a segfault.
311
Borislav Petkovdfb09f92011-08-05 15:15:08 +0200312 align_va_addr= [X86-64]
313 Align virtual addresses by clearing slice [14:12] when
314 allocating a VMA at process creation time. This option
315 gives you up to 3% performance improvement on AMD F15h
316 machines (where it is enabled by default) for a
317 CPU-intensive style benchmark, and it can vary highly in
318 a microbenchmark depending on workload and compiler.
319
Borislav Petkov8360ee22011-11-21 12:10:19 +0100320 32: only for 32-bit processes
321 64: only for 64-bit processes
Borislav Petkovdfb09f92011-08-05 15:15:08 +0200322 on: enable for both 32- and 64-bit processes
323 off: disable for both 32- and 64-bit processes
324
Steven Rostedt (Red Hat)55034cd2013-03-07 22:48:09 -0500325 alloc_snapshot [FTRACE]
326 Allocate the ftrace snapshot buffer on boot up when the
327 main buffer is allocated. This is handy if debugging
328 and you need to use tracing_snapshot() on boot up, and
329 do not want to use tracing_snapshot_alloc() as it needs
330 to be done where GFP_KERNEL allocations are allowed.
331
Sedat Dilek89e0b9a2011-12-05 23:08:32 +0100332 amd_iommu= [HW,X86-64]
Joerg Roedel54b4cbd2008-06-26 21:28:10 +0200333 Pass parameters to the AMD IOMMU driver in the system.
334 Possible values are:
FUJITA Tomonoriafa9fdc2008-09-20 01:23:30 +0900335 fullflush - enable flushing of IO/TLB entries when
336 they are unmapped. Otherwise they are
337 flushed before they will be reused, which
338 is a lot of faster
Joerg Roedela5235722010-05-11 17:12:33 +0200339 off - do not initialize any AMD IOMMU found in
340 the system
Joerg Roedel5abcdba2011-12-01 15:49:45 +0100341 force_isolation - Force device isolation for all
342 devices. The IOMMU driver is not
343 allowed anymore to lift isolation
344 requirements as needed. This option
345 does not override iommu=pt
FUJITA Tomonoriafa9fdc2008-09-20 01:23:30 +0900346
Shuah Khanc099cf12012-05-24 15:58:25 -0600347 amd_iommu_dump= [HW,X86-64]
348 Enable AMD IOMMU driver option to dump the ACPI table
349 for AMD IOMMU. With this option enabled, AMD IOMMU
350 driver will print ACPI tables for AMD IOMMU during
351 IOMMU initialization.
352
Linus Torvalds1da177e2005-04-16 15:20:36 -0700353 amijoy.map= [HW,JOY] Amiga joystick support
354 Map of devices attached to JOY0DAT and JOY1DAT
355 Format: <a>,<b>
Paul Bolle395cf962011-08-15 02:02:26 +0200356 See also Documentation/input/joystick.txt
Linus Torvalds1da177e2005-04-16 15:20:36 -0700357
358 analog.map= [HW,JOY] Analog joystick and gamepad support
359 Specifies type or capabilities of an analog joystick
360 connected to one of 16 gameports
361 Format: <type1>,<type2>,..<type16>
362
Randy Dunlapa9913042005-10-23 12:57:11 -0700363 apc= [HW,SPARC]
364 Power management functions (SPARCstation-4/5 + deriv.)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700365 Format: noidle
366 Disable APC CPU standby support. SPARCstation-Fox does
367 not play well with APC CPU idle - disable it if you have
368 APC and your system crashes randomly.
369
Randy Dunlapca1eda22009-05-06 16:02:58 -0700370 apic= [APIC,X86-32] Advanced Programmable Interrupt Controller
Randy Dunlapc8facbb2007-07-31 00:37:40 -0700371 Change the output verbosity whilst booting
Linus Torvalds1da177e2005-04-16 15:20:36 -0700372 Format: { quiet (default) | verbose | debug }
373 Change the amount of debugging information output
374 when initialising the APIC and IO-APIC components.
Randy Dunlapa9913042005-10-23 12:57:11 -0700375
Brian Haleyb0f83b22010-02-04 13:36:50 -0800376 autoconf= [IPV6]
377 See Documentation/networking/ipv6.txt.
378
Cyrill Gorcunov9636bc02009-10-14 19:09:04 +0400379 show_lapic= [APIC,X86] Advanced Programmable Interrupt Controller
380 Limit apic dumping. The parameter defines the maximal
381 number of local apics being dumped. Also it is possible
382 to set it to "all" by meaning -- no limit here.
383 Format: { 1 (default) | 2 | ... | all }.
384 The parameter valid if only apic=debug or
385 apic=verbose is specified.
386 Example: apic=debug show_lapic=all
387
Linus Torvalds1da177e2005-04-16 15:20:36 -0700388 apm= [APM] Advanced Power Management
Pavel Machek71f77052008-07-04 09:59:43 -0700389 See header of arch/x86/kernel/apm_32.c.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700390
Linus Torvalds1da177e2005-04-16 15:20:36 -0700391 arcrimi= [HW,NET] ARCnet - "RIM I" (entirely mem-mapped) cards
392 Format: <io>,<irq>,<nodeID>
393
394 ataflop= [HW,M68k]
395
396 atarimouse= [HW,MOUSE] Atari Mouse
397
Linus Torvalds1da177e2005-04-16 15:20:36 -0700398 atkbd.extra= [HW] Enable extra LEDs and keys on IBM RapidAccess,
399 EzKey and similar keyboards
400
401 atkbd.reset= [HW] Reset keyboard during initialization
402
Randy Dunlapa9913042005-10-23 12:57:11 -0700403 atkbd.set= [HW] Select keyboard code set
404 Format: <int> (2 = AT (default), 3 = PS/2)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700405
406 atkbd.scroll= [HW] Enable scroll wheel on MS Office and similar
407 keyboards
408
409 atkbd.softraw= [HW] Choose between synthetic and real raw mode
410 Format: <bool> (0 = real, 1 = synthetic (default))
Randy Dunlapa9913042005-10-23 12:57:11 -0700411
412 atkbd.softrepeat= [HW]
413 Use software keyboard repeat
Linus Torvalds1da177e2005-04-16 15:20:36 -0700414
Linus Torvalds1da177e2005-04-16 15:20:36 -0700415 baycom_epp= [HW,AX25]
416 Format: <io>,<mode>
Randy Dunlapa9913042005-10-23 12:57:11 -0700417
Linus Torvalds1da177e2005-04-16 15:20:36 -0700418 baycom_par= [HW,AX25] BayCom Parallel Port AX.25 Modem
419 Format: <io>,<mode>
420 See header of drivers/net/hamradio/baycom_par.c.
421
Randy Dunlapa9913042005-10-23 12:57:11 -0700422 baycom_ser_fdx= [HW,AX25]
423 BayCom Serial Port AX.25 Modem (Full Duplex Mode)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700424 Format: <io>,<irq>,<mode>[,<baud>]
425 See header of drivers/net/hamradio/baycom_ser_fdx.c.
426
Randy Dunlapa9913042005-10-23 12:57:11 -0700427 baycom_ser_hdx= [HW,AX25]
428 BayCom Serial Port AX.25 Modem (Half Duplex Mode)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700429 Format: <io>,<irq>,<mode>
430 See header of drivers/net/hamradio/baycom_ser_hdx.c.
431
Randy Dunlapbfe8df32007-10-16 01:23:46 -0700432 boot_delay= Milliseconds to delay each printk during boot.
433 Values larger than 10 seconds (10000) are changed to
434 no delay (0).
435 Format: integer
436
Andreas Herrmann35fc9082008-08-20 14:08:58 -0700437 bootmem_debug [KNL] Enable bootmem allocator debug messages.
438
Linus Torvalds1da177e2005-04-16 15:20:36 -0700439 bttv.card= [HW,V4L] bttv (bt848 + bt878 based grabber cards)
Randy Dunlapa9913042005-10-23 12:57:11 -0700440 bttv.radio= Most important insmod options are available as
441 kernel args too.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700442 bttv.pll= See Documentation/video4linux/bttv/Insmod-options
Paul Bolle395cf962011-08-15 02:02:26 +0200443 bttv.tuner=
Linus Torvalds1da177e2005-04-16 15:20:36 -0700444
Will Schmidt4e89a2d2010-09-28 15:33:12 +0000445 bulk_remove=off [PPC] This parameter disables the use of the pSeries
446 firmware feature for flushing multiple hpte entries
447 at a time.
448
Linus Torvalds1da177e2005-04-16 15:20:36 -0700449 c101= [NET] Moxa C101 synchronous serial card
450
Alan Coxcd4f0ef2007-07-31 00:37:59 -0700451 cachesize= [BUGS=X86-32] Override level 2 CPU cache size detection.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700452 Sometimes CPU hardware bugs make them report the cache
453 size incorrectly. The kernel will attempt work arounds
454 to fix known problems, but for some CPUs it is not
455 possible to determine what the correct size should be.
456 This option provides an override for these situations.
457
Sebastian Ott14ff56b2008-01-26 14:10:37 +0100458 ccw_timeout_log [S390]
459 See Documentation/s390/CommonIO for details.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700460
Paul Menage8bab8dd2008-04-04 14:29:57 -0700461 cgroup_disable= [KNL] Disable a particular controller
462 Format: {name of the controller(s) to disable}
463 {Currently supported controllers - "memory"}
464
Linus Torvalds1da177e2005-04-16 15:20:36 -0700465 checkreqprot [SELINUX] Set initial checkreqprot flag value.
466 Format: { "0" | "1" }
467 See security/selinux/Kconfig help text.
Randy Dunlapa9913042005-10-23 12:57:11 -0700468 0 -- check protection applied by kernel (includes
469 any implied execute protection).
Linus Torvalds1da177e2005-04-16 15:20:36 -0700470 1 -- check protection requested by application.
471 Default value is set via a kernel config option.
Randy Dunlapa9913042005-10-23 12:57:11 -0700472 Value can be changed at runtime via
473 /selinux/checkreqprot.
474
Sebastian Ott661ca0d2008-01-26 14:10:36 +0100475 cio_ignore= [S390]
476 See Documentation/s390/CommonIO for details.
Olof Johansson1e435252013-04-27 14:10:18 -0700477 clk_ignore_unused
478 [CLK]
479 Keep all clocks already enabled by bootloader on,
480 even if no driver has claimed them. This is useful
481 for debug and development, but should not be
482 needed on a platform with proper driver support.
483 For more information, see Documentation/clk.txt.
Sebastian Ott661ca0d2008-01-26 14:10:36 +0100484
Alan Coxcd4f0ef2007-07-31 00:37:59 -0700485 clock= [BUGS=X86-32, HW] gettimeofday clocksource override.
john stultz734efb42006-06-26 00:25:05 -0700486 [Deprecated]
Matt LaPlante3f6dee92006-10-03 22:45:33 +0200487 Forces specified clocksource (if available) to be used
john stultz734efb42006-06-26 00:25:05 -0700488 when calculating gettimeofday(). If specified
Matt LaPlante3f6dee92006-10-03 22:45:33 +0200489 clocksource is not available, it defaults to PIT.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700490 Format: { pit | tsc | cyclone | pmtmr }
491
John Stultz592913e2010-07-13 17:56:20 -0700492 clocksource= Override the default clocksource
Randy Dunlap3d6ac982007-05-23 13:58:16 -0700493 Format: <string>
494 Override the default clocksource and use the clocksource
495 with the name specified.
496 Some clocksource names to choose from, depending on
497 the platform:
498 [all] jiffies (this is the base, fallback clocksource)
499 [ACPI] acpi_pm
500 [ARM] imx_timer1,OSTS,netx_timer,mpu_timer2,
501 pxa_timer,timer3,32k_counter,timer0_1
502 [AVR32] avr32
Alok Kataria9863c902010-08-23 14:49:11 -0700503 [X86-32] pit,hpet,tsc;
Randy Dunlap3d6ac982007-05-23 13:58:16 -0700504 scx200_hrt on Geode; cyclone on IBM x440
505 [MIPS] MIPS
506 [PARISC] cr16
507 [S390] tod
508 [SH] SuperH
509 [SPARC64] tick
510 [X86-64] hpet,tsc
511
Andi Kleenac72e782008-01-30 13:33:21 +0100512 clearcpuid=BITNUM [X86]
513 Disable CPUID feature X for the kernel. See
Randy Dunlap07983f02009-01-06 14:42:41 -0800514 arch/x86/include/asm/cpufeature.h for the valid bit
515 numbers. Note the Linux specific bits are not necessarily
Andi Kleenac72e782008-01-30 13:33:21 +0100516 stable over kernel options, but the vendor specific
517 ones should be.
518 Also note that user programs calling CPUID directly
519 or using the feature without checking anything
520 will still see it. This just prevents it from
521 being used by the kernel or shown in /proc/cpuinfo.
522 Also note the kernel might malfunction if you disable
523 some critical bits.
524
Marek Szyprowskic64be2b2011-12-29 13:09:51 +0100525 cma=nn[MG] [ARM,KNL]
526 Sets the size of kernel global memory area for contiguous
527 memory allocations. For more information, see
528 include/linux/dma-contiguous.h
529
Robert Jennings14f966e2009-04-15 05:55:32 +0000530 cmo_free_hint= [PPC] Format: { yes | no }
531 Specify whether pages are marked as being inactive
532 when they are freed. This is used in CMO environments
533 to determine OS memory pressure for page stealing by
534 a hypervisor.
535 Default: yes
536
Marek Szyprowskic7909502011-12-29 13:09:51 +0100537 coherent_pool=nn[KMG] [ARM,KNL]
538 Sets the size of memory pool for coherent, atomic dma
Marek Szyprowskie9da6e92012-07-30 09:11:33 +0200539 allocations, by default set to 256K.
Marek Szyprowskic7909502011-12-29 13:09:51 +0100540
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +0530541 code_bytes [X86] How many bytes of object code to print
Arjan van de Vena25bd942008-01-30 13:33:08 +0100542 in an oops report.
Chuck Ebbert86c41832007-02-13 13:26:25 +0100543 Range: 0 - 8192
544 Default: 64
545
Linus Torvalds1da177e2005-04-16 15:20:36 -0700546 com20020= [HW,NET] ARCnet - COM20020 chipset
Randy Dunlapa9913042005-10-23 12:57:11 -0700547 Format:
548 <io>[,<irq>[,<nodeID>[,<backplane>[,<ckp>[,<timeout>]]]]]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700549
550 com90io= [HW,NET] ARCnet - COM90xx chipset (IO-mapped buffers)
551 Format: <io>[,<irq>]
552
Randy Dunlapa9913042005-10-23 12:57:11 -0700553 com90xx= [HW,NET]
554 ARCnet - COM90xx chipset (memory-mapped buffers)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700555 Format: <io>[,<irq>[,<memstart>]]
556
557 condev= [HW,S390] console device
558 conmode=
Randy Dunlapa9913042005-10-23 12:57:11 -0700559
Linus Torvalds1da177e2005-04-16 15:20:36 -0700560 console= [KNL] Output console device and options.
561
562 tty<n> Use the virtual console device <n>.
563
564 ttyS<n>[,options]
Randy Dunlapf1a1c2d2006-03-25 03:08:17 -0800565 ttyUSB0[,options]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700566 Use the specified serial port. The options are of
Randy Dunlapf1a1c2d2006-03-25 03:08:17 -0800567 the form "bbbbpnf", where "bbbb" is the baud rate,
568 "p" is parity ("n", "o", or "e"), "n" is number of
569 bits, and "f" is flow control ("r" for RTS or
570 omit it). Default is "9600n8".
Linus Torvalds1da177e2005-04-16 15:20:36 -0700571
Randy Dunlapf1a1c2d2006-03-25 03:08:17 -0800572 See Documentation/serial-console.txt for more
573 information. See
574 Documentation/networking/netconsole.txt for an
575 alternative.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700576
Yinghai Lu18a8bd92007-07-15 23:37:59 -0700577 uart[8250],io,<addr>[,options]
578 uart[8250],mmio,<addr>[,options]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700579 Start an early, polled-mode console on the 8250/16550
580 UART at the specified I/O port or MMIO address,
581 switching to the matching ttyS device later. The
582 options are the same as for ttyS, above.
Konrad Rzeszutek Wilka2fd6412013-02-25 15:54:09 -0500583 hvc<n> Use the hypervisor console device <n>. This is for
584 both Xen and PowerPC hypervisors.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700585
Samuel Thibaultf7511d52008-04-30 00:54:51 -0700586 If the device connected to the port is not a TTY but a braille
587 device, prepend "brl," before the device type, for instance
588 console=brl,ttyS0
589 For now, only VisioBraille is supported.
590
Daniel Mackf324edc2009-06-16 15:33:52 -0700591 consoleblank= [KNL] The console blank (screen saver) timeout in
592 seconds. Defaults to 10*60 = 10mins. A value of 0
593 disables the blank timer.
594
Hidehiro Kawai4cb0e112009-01-06 14:42:47 -0800595 coredump_filter=
596 [KNL] Change the default value for
597 /proc/<pid>/coredump_filter.
598 See also Documentation/filesystems/proc.txt.
599
Len Brown62027ae2011-04-01 18:13:10 -0400600 cpuidle.off=1 [CPU_IDLE]
601 disable the cpuidle sub-system
602
Linus Torvalds1da177e2005-04-16 15:20:36 -0700603 cpcihp_generic= [HW,PCI] Generic port I/O CompactPCI driver
Randy Dunlapa9913042005-10-23 12:57:11 -0700604 Format:
605 <first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700606
Ahmed S. Darwish6f21e642011-02-20 20:08:35 -0800607 crashkernel=size[KMG][@offset[KMG]]
608 [KNL] Using kexec, Linux can switch to a 'crash kernel'
609 upon panic. This parameter reserves the physical
610 memory region [offset, offset + size] for that kernel
611 image. If '@offset' is omitted, then a suitable offset
612 is selected automatically. Check
613 Documentation/kdump/kdump.txt for further details.
Eric W. Biedermandc009d92005-06-25 14:57:52 -0700614
Bernhard Wallefb391592007-10-18 23:41:02 -0700615 crashkernel=range1:size1[,range2:size2,...][@offset]
616 [KNL] Same as above, but depends on the memory
617 in the running system. The syntax of range is
618 start-[end] where start and end are both
619 a memory unit (amount[KMG]). See also
Ahmed S. Darwish6f21e642011-02-20 20:08:35 -0800620 Documentation/kdump/kdump.txt for an example.
Bernhard Wallefb391592007-10-18 23:41:02 -0700621
Yinghai Luadbc7422013-04-15 22:23:48 -0700622 crashkernel=size[KMG],high
Yinghai Lu55a20ee2013-04-15 22:23:47 -0700623 [KNL, x86_64] range could be above 4G. Allow kernel
624 to allocate physical memory region from top, so could
625 be above 4G if system have more than 4G ram installed.
626 Otherwise memory region will be allocated below 4G, if
627 available.
628 It will be ignored if crashkernel=X is specified.
Yinghai Luadbc7422013-04-15 22:23:48 -0700629 crashkernel=size[KMG],low
630 [KNL, x86_64] range under 4G. When crashkernel=X,high
631 is passed, kernel could allocate physical memory region
Yinghai Luc729de82013-04-15 22:23:45 -0700632 above 4G, that cause second kernel crash on system
633 that require some amount of low memory, e.g. swiotlb
634 requires at least 64M+32K low memory. Kernel would
635 try to allocate 72M below 4G automatically.
636 This one let user to specify own low range under 4G
637 for second kernel instead.
638 0: to disable low allocation.
Yinghai Luadbc7422013-04-15 22:23:48 -0700639 It will be ignored when crashkernel=X,high is not used
Yinghai Lu55a20ee2013-04-15 22:23:47 -0700640 or memory reserved is below 4G.
Yinghai Luc729de82013-04-15 22:23:45 -0700641
Linus Torvalds1da177e2005-04-16 15:20:36 -0700642 cs89x0_dma= [HW,NET]
643 Format: <dma>
644
645 cs89x0_media= [HW,NET]
646 Format: { rj45 | aui | bnc }
Randy Dunlapa9913042005-10-23 12:57:11 -0700647
Randy Dunlapa9913042005-10-23 12:57:11 -0700648 dasd= [HW,NET]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700649 See header of drivers/s390/block/dasd_devmap.c.
650
651 db9.dev[2|3]= [HW,JOY] Multisystem joystick support via parallel port
652 (one device per port)
653 Format: <port#>,<type>
654 See also Documentation/input/joystick-parport.txt
655
Thomas Renningera648ec02010-08-06 16:11:02 +0200656 ddebug_query= [KNL,DYNAMIC_DEBUG] Enable debug messages at early boot
657 time. See Documentation/dynamic-debug-howto.txt for
Jim Cromie29e36c92012-04-27 14:30:41 -0600658 details. Deprecated, see dyndbg.
Thomas Renningera648ec02010-08-06 16:11:02 +0200659
Linus Torvalds1da177e2005-04-16 15:20:36 -0700660 debug [KNL] Enable kernel debugging (events log level).
661
Ingo Molnarcae2ed92006-07-03 00:24:48 -0700662 debug_locks_verbose=
663 [KNL] verbose self-tests
664 Format=<0|1>
665 Print debugging info while doing the locking API
666 self-tests.
667 We default to 0 (no extra messages), setting it to
668 1 will print _a lot_ more information - normally
669 only useful to kernel developers.
670
Thomas Gleixner3ac7fe52008-04-30 00:55:01 -0700671 debug_objects [KNL] Enable object debugging
672
Kyle McMartin3e8ebb52009-03-01 20:41:41 -0500673 no_debug_objects
674 [KNL] Disable object debugging
675
Stanislaw Gruszkac0a32fc52012-01-10 15:07:28 -0800676 debug_guardpage_minorder=
677 [KNL] When CONFIG_DEBUG_PAGEALLOC is set, this
678 parameter allows control of the order of pages that will
679 be intentionally kept free (and hence protected) by the
680 buddy allocator. Bigger value increase the probability
681 of catching random memory corruption, but reduce the
682 amount of memory for normal system use. The maximum
683 possible value is MAX_ORDER/2. Setting this parameter
684 to 1 or 2 should be enough to identify most random
685 memory corruption problems caused by bugs in kernel or
686 driver code when a CPU writes to (or reads from) a
687 random memory location. Note that there exists a class
688 of memory corruptions problems caused by buggy H/W or
689 F/W or by drivers badly programing DMA (basically when
690 memory is written at bus level and the CPU MMU is
691 bypassed) which are not detectable by
692 CONFIG_DEBUG_PAGEALLOC, hence this option will not help
693 tracking down these problems.
694
Thomas Gleixnerd3af01f2008-07-15 15:04:56 +0200695 debugpat [X86] Enable PAT debugging
696
Robert P. J. Day2d27a962008-02-03 15:18:45 +0200697 decnet.addr= [HW,NET]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700698 Format: <area>[,<node>]
699 See also Documentation/networking/decnet.txt.
700
Randy Dunlap0cb55ad2009-04-05 15:55:22 -0700701 default_hugepagesz=
702 [same as hugepagesz=] The size of the default
703 HugeTLB page size. This is the size represented by
704 the legacy /proc/ hugepages APIs, used for SHM, and
705 default size when mounting hugetlbfs filesystems.
706 Defaults to the default architecture's huge page size
707 if not specified.
Antonino A. Daplas55ff9782007-05-08 00:38:53 -0700708
Linus Torvalds1da177e2005-04-16 15:20:36 -0700709 dhash_entries= [KNL]
710 Set number of hash buckets for dentry cache.
Randy Dunlapa9913042005-10-23 12:57:11 -0700711
Linus Torvalds1da177e2005-04-16 15:20:36 -0700712 digi= [HW,SERIAL]
713 IO parameters + enable/disable command.
714
715 digiepca= [HW,SERIAL]
716 See drivers/char/README.epca and
Randy Dunlap31c00fc2008-11-13 21:33:24 +0000717 Documentation/serial/digiepca.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700718
Brian Haleyb0f83b22010-02-04 13:36:50 -0800719 disable= [IPV6]
720 See Documentation/networking/ipv6.txt.
721
Nishanth Aravamudan4e8b0cf2011-02-10 09:10:47 +0000722 disable_ddw [PPC/PSERIES]
723 Disable Dynamic DMA Window support. Use this if
724 to workaround buggy firmware.
725
Brian Haleyb0f83b22010-02-04 13:36:50 -0800726 disable_ipv6= [IPV6]
727 See Documentation/networking/ipv6.txt.
728
Yinghai Lu95ffa242008-04-29 03:52:33 -0700729 disable_mtrr_cleanup [X86]
Yinghai Lu95ffa242008-04-29 03:52:33 -0700730 The kernel tries to adjust MTRR layout from continuous
731 to discrete, to make X server driver able to add WB
Randy Dunlap0cb55ad2009-04-05 15:55:22 -0700732 entry later. This parameter disables that.
Yinghai Lu95ffa242008-04-29 03:52:33 -0700733
Yinghai Lu093af8d2008-01-30 13:33:32 +0100734 disable_mtrr_trim [X86, Intel and AMD only]
Jesse Barnes99fc8d42008-01-30 13:33:18 +0100735 By default the kernel will trim any uncacheable
736 memory out of your available memory pool based on
737 MTRR settings. This parameter disables that behavior,
738 possibly causing your machine to run very slowly.
739
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +0530740 disable_timer_pin_1 [X86]
Randy Dunlap0cb55ad2009-04-05 15:55:22 -0700741 Disable PIN 1 of APIC timer
742 Can be useful to work around chipset bugs.
743
Randy Dunlap0cb55ad2009-04-05 15:55:22 -0700744 dma_debug=off If the kernel is compiled with DMA_API_DEBUG support,
745 this option disables the debugging code at boot.
746
747 dma_debug_entries=<number>
748 This option allows to tune the number of preallocated
749 entries for DMA-API debugging code. One entry is
750 required per DMA-API allocation. Use this if the
751 DMA-API debugging code disables itself because the
752 architectural default is too low.
753
Joerg Roedel1745de52009-05-22 21:49:51 +0200754 dma_debug_driver=<driver_name>
755 With this option the DMA-API debugging driver
756 filter feature can be enabled at boot time. Just
757 pass the driver to filter for as the parameter.
758 The filter can be disabled or changed to another
759 driver later using sysfs.
760
Carsten Emdeda0df922012-03-18 22:37:33 +0100761 drm_kms_helper.edid_firmware=[<connector>:]<file>
762 Broken monitors, graphic adapters and KVMs may
763 send no or incorrect EDID data sets. This parameter
764 allows to specify an EDID data set in the
765 /lib/firmware directory that is used instead.
766 Generic built-in EDID data sets are used, if one of
767 edid/1024x768.bin, edid/1280x1024.bin,
768 edid/1680x1050.bin, or edid/1920x1080.bin is given
769 and no file with the same name exists. Details and
770 instructions how to build your own EDID data are
771 available in Documentation/EDID/HOWTO.txt. An EDID
772 data set will only be used for a particular connector,
773 if its name and a colon are prepended to the EDID
774 name.
775
Linus Torvalds1da177e2005-04-16 15:20:36 -0700776 dscc4.setup= [NET]
777
Jim Cromie29e36c92012-04-27 14:30:41 -0600778 dyndbg[="val"] [KNL,DYNAMIC_DEBUG]
779 module.dyndbg[="val"]
780 Enable debug messages at boot time. See
781 Documentation/dynamic-debug-howto.txt for details.
782
Randy Dunlap0cb55ad2009-04-05 15:55:22 -0700783 earlycon= [KNL] Output early console device and options.
784 uart[8250],io,<addr>[,options]
785 uart[8250],mmio,<addr>[,options]
Samium Gromoff1917ac72010-07-20 15:26:51 -0700786 uart[8250],mmio32,<addr>[,options]
Randy Dunlap0cb55ad2009-04-05 15:55:22 -0700787 Start an early, polled-mode console on the 8250/16550
788 UART at the specified I/O port or MMIO address.
Randy Dunlap16290242011-08-13 12:34:52 -0700789 MMIO inter-register address stride is either 8-bit
790 (mmio) or 32-bit (mmio32).
Randy Dunlap0cb55ad2009-04-05 15:55:22 -0700791 The options are the same as for ttyS, above.
792
Dave Hansen147ea092013-04-10 14:03:38 -0700793 earlyprintk= [X86,SH,BLACKFIN,ARM]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700794 earlyprintk=vga
Konrad Rzeszutek Wilk2482a922013-02-25 15:54:08 -0500795 earlyprintk=xen
Linus Torvalds1da177e2005-04-16 15:20:36 -0700796 earlyprintk=serial[,ttySn[,baudrate]]
Dave Hansen147ea092013-04-10 14:03:38 -0700797 earlyprintk=serial[,0x...[,baudrate]]
Jason Wesselea3acb12009-09-24 09:08:30 -0500798 earlyprintk=ttySn[,baudrate]
Jason Wessel9780bc42009-08-20 15:39:57 -0500799 earlyprintk=dbgp[debugController#]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700800
Dave Hansen147ea092013-04-10 14:03:38 -0700801 earlyprintk is useful when the kernel crashes before
802 the normal console is initialized. It is not enabled by
803 default because it has some cosmetic problems.
804
Randy Dunlapa9913042005-10-23 12:57:11 -0700805 Append ",keep" to not disable it when the real console
Linus Torvalds1da177e2005-04-16 15:20:36 -0700806 takes over.
807
Yinghai Lu5c059172008-07-24 17:29:40 -0700808 Only vga or serial or usb debug port at a time.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700809
Dave Hansen147ea092013-04-10 14:03:38 -0700810 Currently only ttyS0 and ttyS1 may be specified by
811 name. Other I/O ports may be explicitly specified
812 on some architectures (x86 and arm at least) by
813 replacing ttySn with an I/O port address, like this:
814 earlyprintk=serial,0x1008,115200
815 You can find the port for a given device in
816 /proc/tty/driver/serial:
817 2: uart:ST16650V2 port:00001008 irq:18 ...
Linus Torvalds1da177e2005-04-16 15:20:36 -0700818
819 Interaction with the standard serial driver is not
820 very good.
821
822 The VGA output is eventually overwritten by the real
823 console.
824
Konrad Rzeszutek Wilk2482a922013-02-25 15:54:08 -0500825 The xen output can only be used by Xen PV guests.
826
Jason Wessel97311912010-05-20 21:04:30 -0500827 ekgdboc= [X86,KGDB] Allow early kernel console debugging
828 ekgdboc=kbd
829
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300830 This is designed to be used in conjunction with
Jason Wessel97311912010-05-20 21:04:30 -0500831 the boot argument: earlyprintk=vga
832
Linus Torvalds1da177e2005-04-16 15:20:36 -0700833 edd= [EDD]
Tim Gardner8c4dd602008-04-29 01:02:45 -0700834 Format: {"off" | "on" | "skip[mbr]"}
Linus Torvalds1da177e2005-04-16 15:20:36 -0700835
Richard Weinberger8c58bf32013-04-17 01:00:53 +0200836 efi_no_storage_paranoia [EFI; X86]
837 Using this parameter you can use more than 50% of
838 your efi variable storage. Use this parameter only if
839 you are really sure that your UEFI does sane gc and
840 fulfills the spec otherwise your board may brick.
841
Linus Torvalds1da177e2005-04-16 15:20:36 -0700842 eisa_irq_edge= [PARISC,HW]
843 See header of drivers/parisc/eisa.c.
844
Alan Coxcd4f0ef2007-07-31 00:37:59 -0700845 elanfreq= [X86-32]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700846 See comment before function elanfreq_setup() in
Pavel Machek71f77052008-07-04 09:59:43 -0700847 arch/x86/kernel/cpu/cpufreq/elanfreq.c.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700848
849 elevator= [IOSCHED]
Randy Dunlap17a9e7b2010-11-11 12:09:59 +0100850 Format: {"cfq" | "deadline" | "noop"}
Paul Bolle395cf962011-08-15 02:02:26 +0200851 See Documentation/block/cfq-iosched.txt and
Randy Dunlapa9913042005-10-23 12:57:11 -0700852 Documentation/block/deadline-iosched.txt for details.
853
Michael Holzheud3bf37952011-10-30 15:16:37 +0100854 elfcorehdr=[size[KMG]@]offset[KMG] [IA64,PPC,SH,X86,S390]
Randy Dunlapa9913042005-10-23 12:57:11 -0700855 Specifies physical address of start of kernel core
Michael Holzheud3bf37952011-10-30 15:16:37 +0100856 image elf header and optionally the size. Generally
857 kexec loader will pass this option to capture kernel.
Vivek Goyalaac04b32006-01-09 20:51:47 -0800858 See Documentation/kdump/kdump.txt for details.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700859
Randy Dunlap0cb55ad2009-04-05 15:55:22 -0700860 enable_mtrr_cleanup [X86]
861 The kernel tries to adjust MTRR layout from continuous
862 to discrete, to make X server driver able to add WB
863 entry later. This parameter enables that.
864
Randy Dunlapca1eda22009-05-06 16:02:58 -0700865 enable_timer_pin_1 [X86]
Randy Dunlap0cb55ad2009-04-05 15:55:22 -0700866 Enable PIN 1 of APIC timer
867 Can be useful to work around chipset bugs
868 (in particular on some ATI chipsets).
869 The kernel tries to set a reasonable default.
870
Linus Torvalds1da177e2005-04-16 15:20:36 -0700871 enforcing [SELINUX] Set initial enforcing status.
872 Format: {"0" | "1"}
873 See security/selinux/Kconfig help text.
874 0 -- permissive (log only, no denials).
875 1 -- enforcing (deny and log).
876 Default value is 0.
877 Value can be changed at runtime via /selinux/enforce.
878
Huang Yinga08f82d2010-05-18 14:35:21 +0800879 erst_disable [ACPI]
880 Disable Error Record Serialization Table (ERST)
881 support.
882
Linus Torvalds1da177e2005-04-16 15:20:36 -0700883 ether= [HW,NET] Ethernet cards parameters
884 This option is obsoleted by the "netdev=" option, which
885 has equivalent usage. See its documentation for details.
886
Mimi Zohar7102ebc2011-05-12 18:33:20 -0400887 evm= [EVM]
888 Format: { "fix" }
889 Permit 'security.evm' to be updated regardless of
890 current integrity status.
891
Akinobu Mitade1ba092006-12-08 02:39:42 -0800892 failslab=
893 fail_page_alloc=
894 fail_make_request=[KNL]
895 General fault injection mechanism.
896 Format: <interval>,<probability>,<space>,<times>
Paul Bolle395cf962011-08-15 02:02:26 +0200897 See also Documentation/fault-injection/.
Akinobu Mitade1ba092006-12-08 02:39:42 -0800898
Linus Torvalds1da177e2005-04-16 15:20:36 -0700899 floppy= [HW]
Randy Dunlap31c00fc2008-11-13 21:33:24 +0000900 See Documentation/blockdev/floppy.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700901
Alex Chiangf13ae302008-05-08 14:03:23 -0600902 force_pal_cache_flush
903 [IA-64] Avoid check_sal_cache_flush which may hang on
904 buggy SAL_CACHE_FLUSH implementations. Using this
905 parameter will force ia64_sal_cache_flush to call
906 ia64_pal_cache_flush instead of SAL_CACHE_FLUSH.
907
Peter Zijlstrad9e54072008-11-01 19:57:37 +0100908 ftrace=[tracer]
Steven Rostedt2af15d62009-05-28 13:37:24 -0400909 [FTRACE] will set and start the specified tracer
Peter Zijlstrad9e54072008-11-01 19:57:37 +0100910 as early as possible in order to facilitate early
911 boot debugging.
912
Frederic Weisbeckercecbca92010-04-18 19:08:41 +0200913 ftrace_dump_on_oops[=orig_cpu]
Steven Rostedt2af15d62009-05-28 13:37:24 -0400914 [FTRACE] will dump the trace buffers on oops.
Frederic Weisbeckercecbca92010-04-18 19:08:41 +0200915 If no parameter is passed, ftrace will dump
916 buffers of all CPUs, but if you pass orig_cpu, it will
917 dump only the buffer of the CPU that triggered the
918 oops.
Steven Rostedt2af15d62009-05-28 13:37:24 -0400919
920 ftrace_filter=[function-list]
921 [FTRACE] Limit the functions traced by the function
922 tracer at boot up. function-list is a comma separated
923 list of functions. This list can be changed at run
924 time by the set_ftrace_filter file in the debugfs
Randy Dunlap16290242011-08-13 12:34:52 -0700925 tracing directory.
Steven Rostedt2af15d62009-05-28 13:37:24 -0400926
927 ftrace_notrace=[function-list]
928 [FTRACE] Do not trace the functions specified in
929 function-list. This list can be changed at run time
930 by the set_ftrace_notrace file in the debugfs
931 tracing directory.
Peter Zijlstrad9e54072008-11-01 19:57:37 +0100932
Stefan Assmann369bc182009-10-12 22:17:21 +0200933 ftrace_graph_filter=[function-list]
934 [FTRACE] Limit the top level callers functions traced
935 by the function graph tracer at boot up.
936 function-list is a comma separated list of functions
937 that can be changed at run time by the
938 set_graph_function file in the debugfs tracing directory.
939
Linus Torvalds1da177e2005-04-16 15:20:36 -0700940 gamecon.map[2|3]=
941 [HW,JOY] Multisystem joystick and NES/SNES/PSX pad
942 support via parallel port (up to 5 devices per port)
943 Format: <port#>,<pad1>,<pad2>,<pad3>,<pad4>,<pad5>
944 See also Documentation/input/joystick-parport.txt
945
946 gamma= [HW,DRM]
947
Yinghai Luaaf23042008-01-30 13:33:09 +0100948 gart_fix_e820= [X86_64] disable the fix e820 for K8 GART
949 Format: off | on
950 default: on
951
Peter Oberparleiter2521f2c2009-06-17 16:28:08 -0700952 gcov_persist= [GCOV] When non-zero (default), profiling data for
953 kernel modules is saved and remains accessible via
954 debugfs, even when the module is unloaded/reloaded.
955 When zero, profiling data is discarded and associated
956 debugfs files are removed at module unload time.
957
Linus Torvalds1da177e2005-04-16 15:20:36 -0700958 gpt [EFI] Forces disk with valid GPT signature but
959 invalid Protective MBR to be treated as GPT.
960
Andreas Larsson6cec9b02012-11-15 08:47:14 +0100961 grcan.enable0= [HW] Configuration of physical interface 0. Determines
962 the "Enable 0" bit of the configuration register.
963 Format: 0 | 1
964 Default: 0
965 grcan.enable1= [HW] Configuration of physical interface 1. Determines
966 the "Enable 0" bit of the configuration register.
967 Format: 0 | 1
968 Default: 0
969 grcan.select= [HW] Select which physical interface to use.
970 Format: 0 | 1
971 Default: 0
972 grcan.txsize= [HW] Sets the size of the tx buffer.
973 Format: <unsigned int> such that (txsize & ~0x1fffc0) == 0.
974 Default: 1024
975 grcan.rxsize= [HW] Sets the size of the rx buffer.
976 Format: <unsigned int> such that (rxsize & ~0x1fffc0) == 0.
977 Default: 1024
978
Linus Torvalds1da177e2005-04-16 15:20:36 -0700979 hashdist= [KNL,NUMA] Large hashes allocated during boot
980 are distributed across NUMA nodes. Defaults on
Randy Dunlap16290242011-08-13 12:34:52 -0700981 for 64-bit NUMA, off otherwise.
Randy Dunlapa9913042005-10-23 12:57:11 -0700982 Format: 0 | 1 (for off | on)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700983
984 hcl= [IA-64] SGI's Hardware Graph compatibility layer
985
986 hd= [EIDE] (E)IDE hard drive subsystem geometry
987 Format: <cyl>,<head>,<sect>
988
Huang Yingea8c0712010-05-18 14:35:15 +0800989 hest_disable [ACPI]
990 Disable Hardware Error Source Table (HEST) support;
991 corresponding firmware-first mode error processing
992 logic will be disabled.
993
Linus Torvalds1da177e2005-04-16 15:20:36 -0700994 highmem=nn[KMG] [KNL,BOOT] forces the highmem zone to have an exact
995 size of <nn>. This works even on boxes that have no
996 highmem otherwise. This also works to reduce highmem
997 size on bigger boxes.
998
Thomas Gleixner54cdfdb2007-02-16 01:28:11 -0800999 highres= [KNL] Enable/disable high resolution timer mode.
1000 Valid parameters: "on", "off"
1001 Default: "on"
1002
Linus Torvalds1da177e2005-04-16 15:20:36 -07001003 hisax= [HW,ISDN]
1004 See Documentation/isdn/README.HiSax.
1005
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07001006 hlt [BUGS=ARM,SH]
1007
1008 hpet= [X86-32,HPET] option to control HPET usage
1009 Format: { enable (default) | disable | force |
1010 verbose }
1011 disable: disable HPET and use PIT instead
1012 force: allow force enabled of undocumented chips (ICH4,
1013 VIA, nVidia)
1014 verbose: show contents of HPET registers during setup
1015
Andi Kleenb4718e62008-07-23 21:27:51 -07001016 hugepages= [HW,X86-32,IA-64] HugeTLB pages to allocate at boot.
1017 hugepagesz= [HW,IA-64,PPC,X86-64] The size of the HugeTLB pages.
Jon Tollefson0d9ea752008-07-23 21:27:56 -07001018 On x86-64 and powerpc, this option can be specified
1019 multiple times interleaved with hugepages= to reserve
1020 huge pages of different sizes. Valid pages sizes on
1021 x86-64 are 2M (when the CPU supports "pse") and 1G
1022 (when the CPU supports the "pdpe1gb" cpuinfo flag)
Andi Kleenb4718e62008-07-23 21:27:51 -07001023 Note that 1GB pages can only be allocated at boot time
1024 using hugepages= and not freed afterwards.
Paul Mundt6902aa82008-09-21 17:14:42 +09001025
Hendrik Brueckner555d61d2009-01-09 12:15:02 +01001026 hvc_iucv= [S390] Number of z/VM IUCV hypervisor console (HVC)
1027 terminal devices. Valid values: 0..8
Hendrik Brueckner431429f2009-03-26 15:23:55 +01001028 hvc_iucv_allow= [S390] Comma-separated list of z/VM user IDs.
1029 If specified, z/VM IUCV HVC accepts connections
1030 from listed z/VM user IDs only.
Hendrik Bruecknercef71252008-12-25 13:39:55 +01001031
James Hoganfdabf522012-10-09 11:00:27 +01001032 hwthread_map= [METAG] Comma-separated list of Linux cpu id to
1033 hardware thread id mappings.
1034 Format: <cpu>:<hwthread>
1035
Fabio M. Di Nitto7bf69392011-03-22 16:34:20 -07001036 keep_bootcon [KNL]
1037 Do not unregister boot console at start. This is only
1038 useful for debugging when something happens in the window
1039 between unregistering the boot console and initializing
1040 the real console.
1041
Jarkko Nikula3a853fb2009-03-23 18:07:47 -07001042 i2c_bus= [HW] Override the default board specific I2C bus speed
Jarkko Nikula79547632009-03-23 18:07:48 -07001043 or register an additional I2C bus that is not
1044 registered from board initialization code.
Jarkko Nikula3a853fb2009-03-23 18:07:47 -07001045 Format:
1046 <bus_id>,<clkrate>
1047
Jiri Kosina36d95732008-10-06 02:51:09 -04001048 i8042.debug [HW] Toggle i8042 debug mode
Linus Torvalds1da177e2005-04-16 15:20:36 -07001049 i8042.direct [HW] Put keyboard port into non-translated mode
Matt LaPlante84eb8d02006-10-03 22:53:09 +02001050 i8042.dumbkbd [HW] Pretend that controller can only read data from
1051 keyboard and cannot control its state
Linus Torvalds1da177e2005-04-16 15:20:36 -07001052 (Don't attempt to blink the leds)
1053 i8042.noaux [HW] Don't check for auxiliary (== mouse) port
Dmitry Torokhov945ef0d2005-09-04 01:42:00 -05001054 i8042.nokbd [HW] Don't check/create keyboard port
Jiri Kosina75d08c72008-03-13 16:13:59 -04001055 i8042.noloop [HW] Disable the AUX Loopback command while probing
1056 for the AUX port
Linus Torvalds1da177e2005-04-16 15:20:36 -07001057 i8042.nomux [HW] Don't check presence of an active multiplexing
1058 controller
1059 i8042.nopnp [HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX
1060 controllers
Masanari Iida24775d62012-02-15 00:26:42 +09001061 i8042.notimeout [HW] Ignore timeout condition signalled by controller
Linus Torvalds1da177e2005-04-16 15:20:36 -07001062 i8042.reset [HW] Reset the controller during init and cleanup
1063 i8042.unlock [HW] Unlock (ignore) the keylock
1064
1065 i810= [HW,DRM]
1066
Dmitry Torokhove70c9d52005-06-25 14:54:25 -07001067 i8k.ignore_dmi [HW] Continue probing hardware even if DMI data
1068 indicates that the driver is running on unsupported
1069 hardware.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001070 i8k.force [HW] Activate i8k driver even if SMM BIOS signature
1071 does not match list of supported models.
1072 i8k.power_status
1073 [HW] Report power status in /proc/i8k
1074 (disabled by default)
1075 i8k.restricted [HW] Allow controlling fans only if SYS_ADMIN
1076 capability is set.
1077
Carsten Emde4dca20e2012-03-15 15:56:26 +01001078 i915.invert_brightness=
Carsten Emde7bd90902012-03-15 15:56:25 +01001079 [DRM] Invert the sense of the variable that is used to
1080 set the brightness of the panel backlight. Normally a
Carsten Emde4dca20e2012-03-15 15:56:26 +01001081 brightness value of 0 indicates backlight switched off,
1082 and the maximum of the brightness value sets the backlight
1083 to maximum brightness. If this parameter is set to 0
1084 (default) and the machine requires it, or this parameter
1085 is set to 1, a brightness value of 0 sets the backlight
1086 to maximum brightness, and the maximum of the brightness
1087 value switches the backlight off.
1088 -1 -- never invert brightness
1089 0 -- machine default
1090 1 -- force brightness inversion
Carsten Emde7bd90902012-03-15 15:56:25 +01001091
Linus Torvalds1da177e2005-04-16 15:20:36 -07001092 icn= [HW,ISDN]
1093 Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]]
1094
David Fries0af80c02009-02-25 20:28:21 +01001095 ide-core.nodma= [HW] (E)IDE subsystem
1096 Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc
Bartlomiej Zolnierkiewicz075affc2009-06-07 13:52:52 +02001097 .vlb_clock .pci_clock .noflush .nohpa .noprobe .nowerr
1098 .cdrom .chs .ignore_cable are additional options
Randy Dunlap1c10e932008-03-07 21:53:50 +01001099 See Documentation/ide/ide.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001100
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07001101 ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem
1102 Claim all unknown PCI IDE storage controllers.
1103
Andi Kleenf039b752007-05-02 19:27:12 +02001104 idle= [X86]
Len Brown69fb3672013-02-10 01:38:39 -05001105 Format: idle=poll, idle=halt, idle=nomwait
Randy Dunlapada9cfd2008-12-19 10:57:32 -08001106 Poll forces a polling idle loop that can slightly
1107 improve the performance of waking up a idle CPU, but
1108 will use a lot of power and make the system run hot.
1109 Not recommended.
Randy Dunlapada9cfd2008-12-19 10:57:32 -08001110 idle=halt: Halt is forced to be used for CPU idle.
Zhao Yakuic1e3b372008-06-24 17:58:53 +08001111 In such case C2/C3 won't be used again.
Randy Dunlapada9cfd2008-12-19 10:57:32 -08001112 idle=nomwait: Disable mwait for CPU C-states
Randy Dunlapa9913042005-10-23 12:57:11 -07001113
Ingo Molnar792908222006-12-06 20:40:51 -08001114 ignore_loglevel [KNL]
1115 Ignore loglevel setting - this will print /all/
1116 kernel messages to the console. Useful for debugging.
Yanmin Zhang0eca6b72011-10-31 17:11:25 -07001117 We also add it as printk module parameter, so users
1118 could change it dynamically, usually by
1119 /sys/module/printk/parameters/ignore_loglevel.
Ingo Molnar792908222006-12-06 20:40:51 -08001120
Linus Torvalds1da177e2005-04-16 15:20:36 -07001121 ihash_entries= [KNL]
1122 Set number of hash buckets for inode cache.
1123
Mimi Zohar2fe5d6d2012-02-13 10:15:05 -05001124 ima_appraise= [IMA] appraise integrity measurements
1125 Format: { "off" | "enforce" | "fix" }
1126 default: "enforce"
1127
Mimi Zohar07f6a792011-03-09 22:25:48 -05001128 ima_appraise_tcb [IMA]
1129 The builtin appraise policy appraises all files
1130 owned by uid=0.
1131
Mimi Zohar3323eec92009-02-04 09:06:58 -05001132 ima_hash= [IMA]
Stephen Hemmingera9ed83a2009-09-17 14:14:45 -07001133 Format: { "sha1" | "md5" }
Mimi Zohar3323eec92009-02-04 09:06:58 -05001134 default: "sha1"
1135
Eric Paris5789ba32009-05-21 15:47:06 -04001136 ima_tcb [IMA]
1137 Load a policy which meets the needs of the Trusted
1138 Computing Base. This means IMA will measure all
1139 programs exec'd, files mmap'd for exec, and all files
1140 opened for read by uid=0.
1141
Linus Torvalds1da177e2005-04-16 15:20:36 -07001142 init= [KNL]
1143 Format: <full_path>
1144 Run specified binary instead of /sbin/init as init
1145 process.
1146
1147 initcall_debug [KNL] Trace initcalls as they are executed. Useful
1148 for working out where the kernel is dying during
1149 startup.
1150
1151 initrd= [BOOT] Specify the location of the initial ramdisk
1152
1153 inport.irq= [HW] Inport (ATI XL and Microsoft) busmouse driver
1154 Format: <irq>
1155
Fenghua Yu6bb2ff82013-05-21 15:35:17 -04001156 int_pln_enable [x86] Enable power limit notification interrupt
1157
Mimi Zohard726d8d2013-03-18 14:48:02 -04001158 integrity_audit=[IMA]
1159 Format: { "0" | "1" }
1160 0 -- basic integrity auditing messages. (Default)
1161 1 -- additional integrity auditing messages.
1162
Keshavamurthy, Anil Sba395922007-10-21 16:41:49 -07001163 intel_iommu= [DMAR] Intel IOMMU driver (DMAR) option
Kyle McMartin0cd5c3c2009-02-04 14:29:19 -08001164 on
1165 Enable intel iommu driver.
Keshavamurthy, Anil Sba395922007-10-21 16:41:49 -07001166 off
1167 Disable intel iommu driver.
1168 igfx_off [Default Off]
1169 By default, gfx is mapped as normal device. If a gfx
1170 device has a dedicated DMAR unit, the DMAR unit is
1171 bypassed by not enabling DMAR with this option. In
1172 this case, gfx device will use physical address for
1173 DMA.
Keshavamurthy, Anil S7d3b03c2007-10-21 16:41:53 -07001174 forcedac [x86_64]
1175 With this option iommu will not optimize to look
Randy Dunlap16290242011-08-13 12:34:52 -07001176 for io virtual address below 32-bit forcing dual
Keshavamurthy, Anil S7d3b03c2007-10-21 16:41:53 -07001177 address cycle on pci bus for cards supporting greater
Randy Dunlap16290242011-08-13 12:34:52 -07001178 than 32-bit addressing. The default is to look
1179 for translation below 32-bit and if not available
Keshavamurthy, Anil S7d3b03c2007-10-21 16:41:53 -07001180 then look in the higher range.
mark gross5e0d2a62008-03-04 15:22:08 -08001181 strict [Default Off]
1182 With this option on every unmap_single operation will
1183 result in a hardware IOTLB flush operation as opposed
1184 to batching them for performance.
Youquan Song6dd9a7c2011-05-25 19:13:49 +01001185 sp_off [Default Off]
1186 By default, super page will be supported if Intel IOMMU
1187 has the capability. With this option, super page will
1188 not be supported.
Masanari Iida2e92c7a2011-12-15 01:18:52 +09001189
1190 intel_idle.max_cstate= [KNL,HW,ACPI,X86]
1191 0 disables intel_idle and fall back on acpi_idle.
1192 1 to 6 specify maximum depth of C-state.
1193
Dirk Brandewie6be26492013-02-15 22:55:10 +01001194 intel_pstate= [X86]
1195 disable
1196 Do not enable intel_pstate as the default
1197 scaling driver for the supported processors
1198
Chris Wrightd1423d52010-07-20 11:06:49 -07001199 intremap= [X86-64, Intel-IOMMU]
Chris Wrightd1423d52010-07-20 11:06:49 -07001200 on enable Interrupt Remapping (default)
1201 off disable Interrupt Remapping
1202 nosid disable Source ID checking
Suresh Siddha41750d32011-08-23 17:05:18 -07001203 no_x2apic_optout
1204 BIOS x2APIC opt-out request will be ignored
Chris Wrightd1423d52010-07-20 11:06:49 -07001205
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07001206 iomem= Disable strict checking of access to MMIO memory
1207 strict regions from userspace.
1208 relaxed
1209
1210 iommu= [x86]
1211 off
1212 force
1213 noforce
1214 biomerge
1215 panic
1216 nopanic
1217 merge
1218 nomerge
1219 forcesac
1220 soft
Alex Williamsonbcb71ab2011-10-21 15:56:24 -04001221 pt [x86, IA-64]
Alex Williamsonbcb71ab2011-10-21 15:56:24 -04001222
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07001223
1224 io7= [HW] IO7 for Marvel based alpha systems
1225 See comment before marvel_specify_io7 in
1226 arch/alpha/kernel/core_marvel.c.
1227
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +05301228 io_delay= [X86] I/O delay method
Ingo Molnar6e7c4022008-01-30 13:30:05 +01001229 0x80
1230 Standard port 0x80 based delay
1231 0xed
1232 Alternate port 0xed based delay (needed on some systems)
Rene Hermanb02aae92008-01-30 13:30:05 +01001233 udelay
Ingo Molnar6e7c4022008-01-30 13:30:05 +01001234 Simple two microseconds delay
1235 none
1236 No delay
Rene Hermanb02aae92008-01-30 13:30:05 +01001237
Linus Torvalds1da177e2005-04-16 15:20:36 -07001238 ip= [IP_PNP]
J. Bruce Fieldsdc7a0812009-10-27 14:41:35 -04001239 See Documentation/filesystems/nfs/nfsroot.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001240
1241 ip2= [HW] Set IO/IRQ pairs for up to 4 IntelliPort boards
Randy Dunlapc8facbb2007-07-31 00:37:40 -07001242 See comment before ip2_setup() in
1243 drivers/char/ip2/ip2base.c.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001244
Alan Cox200803d2005-06-28 20:45:18 -07001245 irqfixup [HW]
1246 When an interrupt is not handled search all handlers
1247 for it. Intended to get systems with badly broken
1248 firmware running.
1249
1250 irqpoll [HW]
1251 When an interrupt is not handled search all handlers
1252 for it. Also check all handlers each timer
1253 interrupt. Intended to get systems with badly broken
1254 firmware running.
1255
Linus Torvalds1da177e2005-04-16 15:20:36 -07001256 isapnp= [ISAPNP]
Randy Dunlapa9913042005-10-23 12:57:11 -07001257 Format: <RDP>,<reset>,<pci_scan>,<verbosity>
Linus Torvalds1da177e2005-04-16 15:20:36 -07001258
1259 isolcpus= [KNL,SMP] Isolate CPUs from the general scheduler.
Derek Fults22f2e282006-12-06 20:37:11 -08001260 Format:
1261 <cpu number>,...,<cpu number>
1262 or
Li Zefanb225d442008-11-06 12:53:39 -08001263 <cpu number>-<cpu number>
1264 (must be a positive range in ascending order)
Derek Fults22f2e282006-12-06 20:37:11 -08001265 or a mixture
1266 <cpu number>,...,<cpu number>-<cpu number>
Li Zefanb225d442008-11-06 12:53:39 -08001267
Linus Torvalds1da177e2005-04-16 15:20:36 -07001268 This option can be used to specify one or more CPUs
1269 to isolate from the general SMP balancing and scheduling
Li Zefanb225d442008-11-06 12:53:39 -08001270 algorithms. You can move a process onto or off an
1271 "isolated" CPU via the CPU affinity syscalls or cpuset.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001272 <cpu number> begins at 0 and the maximum value is
1273 "number of CPUs in system - 1".
1274
1275 This option is the preferred way to isolate CPUs. The
Randy Dunlapa9913042005-10-23 12:57:11 -07001276 alternative -- manually setting the CPU mask of all
1277 tasks in the system -- can cause problems and
1278 suboptimal load balancer performance.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001279
Randy Dunlapa9913042005-10-23 12:57:11 -07001280 iucv= [HW,NET]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001281
Joerg Roedel7d8bfa22013-04-09 21:27:19 +02001282 ivrs_ioapic [HW,X86_64]
1283 Provide an override to the IOAPIC-ID<->DEVICE-ID
1284 mapping provided in the IVRS ACPI table. For
1285 example, to map IOAPIC-ID decimal 10 to
1286 PCI device 00:14.0 write the parameter as:
1287 ivrs_ioapic[10]=00:14.0
1288
1289 ivrs_hpet [HW,X86_64]
1290 Provide an override to the HPET-ID<->DEVICE-ID
1291 mapping provided in the IVRS ACPI table. For
1292 example, to map HPET-ID decimal 0 to
1293 PCI device 00:14.0 write the parameter as:
1294 ivrs_hpet[0]=00:14.0
1295
Linus Torvalds1da177e2005-04-16 15:20:36 -07001296 js= [HW,JOY] Analog joystick
1297 See Documentation/input/joystick.txt.
1298
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07001299 keepinitrd [HW,ARM]
1300
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +05301301 kernelcore=nn[KMG] [KNL,X86,IA-64,PPC] This parameter
Mel Gormaned7ed362007-07-17 04:03:14 -07001302 specifies the amount of memory usable by the kernel
1303 for non-movable allocations. The requested amount is
1304 spread evenly throughout all nodes in the system. The
1305 remaining memory in each node is used for Movable
1306 pages. In the event, a node is too small to have both
1307 kernelcore and Movable pages, kernelcore pages will
1308 take priority and other nodes will have a larger number
1309 of kernelcore pages. The Movable zone is used for the
1310 allocation of pages that may be reclaimed or moved
1311 by the page migration subsystem. This means that
1312 HugeTLB pages may not be allocated from this zone.
1313 Note that allocations like PTEs-from-HighMem still
1314 use the HighMem zone if it exists, and the Normal
1315 zone if it does not.
1316
Jason Wessel4fe1da42010-05-20 21:04:31 -05001317 kgdbdbgp= [KGDB,HW] kgdb over EHCI usb debug port.
1318 Format: <Controller#>[,poll interval]
1319 The controller # is the number of the ehci usb debug
1320 port as it is probed via PCI. The poll interval is
1321 optional and is the number seconds in between
1322 each poll cycle to the debug port in case you need
1323 the functionality for interrupting the kernel with
1324 gdb or control-c on the dbgp connection. When
1325 not using this parameter you use sysrq-g to break into
1326 the kernel debugger.
1327
Jason Wessel84c08fd2010-05-20 21:04:24 -05001328 kgdboc= [KGDB,HW] kgdb over consoles.
Jason Wesselada64e42010-05-20 21:04:24 -05001329 Requires a tty driver that supports console polling,
1330 or a supported polling keyboard driver (non-usb).
Jason Wessel65b5ac12010-08-05 09:22:33 -05001331 Serial only format: <serial_device>[,baud]
1332 keyboard only format: kbd
1333 keyboard and serial format: kbd,<serial_device>[,baud]
1334 Optional Kernel mode setting:
1335 kms, kbd format: kms,kbd
1336 kms, kbd and serial format: kms,kbd,<ser_dev>[,baud]
Jason Wessel6cdf6e02008-04-17 20:05:38 +02001337
Jason Wessel84c08fd2010-05-20 21:04:24 -05001338 kgdbwait [KGDB] Stop kernel execution and enter the
1339 kernel debugger at the earliest opportunity.
1340
Florian Fainelli9bed90c62008-08-23 18:54:37 +02001341 kmac= [MIPS] korina ethernet MAC address.
1342 Configure the RouterBoard 532 series on-chip
1343 Ethernet adapter MAC address.
1344
Catalin Marinas04f70332009-06-11 13:22:39 +01001345 kmemleak= [KNL] Boot-time kmemleak enable/disable
1346 Valid arguments: on, off
1347 Default: on
1348
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +05301349 kstack=N [X86] Print N words from the kernel stack
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07001350 in oops dumps.
1351
Andre Przywarafef07aa2009-07-10 14:20:35 +02001352 kvm.ignore_msrs=[KVM] Ignore guest accesses to unhandled MSRs.
1353 Default is 0 (don't ignore, but inject #GP)
1354
Xiao Guangronga182d872010-09-20 22:17:48 +08001355 kvm.mmu_audit= [KVM] This is a R/W parameter which allows audit
1356 KVM MMU at runtime.
Andre Przywarafef07aa2009-07-10 14:20:35 +02001357 Default is 0 (off)
1358
Andre Przywarafef07aa2009-07-10 14:20:35 +02001359 kvm-amd.nested= [KVM,AMD] Allow nested virtualization in KVM/SVM.
Xiao Guangrong8475f942010-09-20 22:16:45 +08001360 Default is 1 (enabled)
Andre Przywarafef07aa2009-07-10 14:20:35 +02001361
1362 kvm-amd.npt= [KVM,AMD] Disable nested paging (virtualized MMU)
1363 for all guests.
Randy Dunlap16290242011-08-13 12:34:52 -07001364 Default is 1 (enabled) if in 64-bit or 32-bit PAE mode.
Andre Przywarafef07aa2009-07-10 14:20:35 +02001365
Andre Przywarafef07aa2009-07-10 14:20:35 +02001366 kvm-intel.ept= [KVM,Intel] Disable extended page tables
1367 (virtualized MMU) support on capable Intel chips.
1368 Default is 1 (enabled)
1369
1370 kvm-intel.emulate_invalid_guest_state=
1371 [KVM,Intel] Enable emulation of invalid guest states
1372 Default is 0 (disabled)
1373
1374 kvm-intel.flexpriority=
1375 [KVM,Intel] Disable FlexPriority feature (TPR shadow).
1376 Default is 1 (enabled)
1377
Sasha Levine1a72ae2011-08-09 14:28:35 +03001378 kvm-intel.nested=
1379 [KVM,Intel] Enable VMX nesting (nVMX).
1380 Default is 0 (disabled)
1381
Andre Przywarafef07aa2009-07-10 14:20:35 +02001382 kvm-intel.unrestricted_guest=
1383 [KVM,Intel] Disable unrestricted guest feature
1384 (virtualized real and unpaged mode) on capable
1385 Intel chips. Default is 1 (enabled)
1386
1387 kvm-intel.vpid= [KVM,Intel] Disable Virtual Processor Identification
1388 feature (tagged TLBs) on capable Intel chips.
1389 Default is 1 (enabled)
1390
Linus Torvalds1da177e2005-04-16 15:20:36 -07001391 l2cr= [PPC]
1392
Robert Brosea78bfbf2008-03-29 07:20:23 +11001393 l3cr= [PPC]
1394
Alan Coxcd4f0ef2007-07-31 00:37:59 -07001395 lapic [X86-32,APIC] Enable the local APIC even if BIOS
Randy Dunlapa9913042005-10-23 12:57:11 -07001396 disabled it.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001397
Suresh Siddha279f1462012-10-22 14:37:58 -07001398 lapic= [x86,APIC] "notscdeadline" Do not use TSC deadline
1399 value for LAPIC timer one-shot implementation. Default
1400 back to the programmable timer unit in the LAPIC.
1401
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +05301402 lapic_timer_c2_ok [X86,APIC] trust the local apic timer
Randy Dunlapada9cfd2008-12-19 10:57:32 -08001403 in C2 power state.
Thomas Gleixnere585bef2007-03-23 16:08:01 +01001404
FD Camifcb71f62008-01-06 19:08:56 +01001405 libata.dma= [LIBATA] DMA control
1406 libata.dma=0 Disable all PATA and SATA DMA
1407 libata.dma=1 PATA and SATA Disk DMA only
1408 libata.dma=2 ATAPI (CDROM) DMA only
Randy Dunlap16290242011-08-13 12:34:52 -07001409 libata.dma=4 Compact Flash DMA only
FD Camifcb71f62008-01-06 19:08:56 +01001410 Combinations also work, so libata.dma=3 enables DMA
1411 for disks and CDROMs, but not CFs.
Randy Dunlap16290242011-08-13 12:34:52 -07001412
Michael Prokop20308872009-08-06 00:14:10 +02001413 libata.ignore_hpa= [LIBATA] Ignore HPA limit
1414 libata.ignore_hpa=0 keep BIOS limits (default)
1415 libata.ignore_hpa=1 ignore limits, using full disk
FD Camifcb71f62008-01-06 19:08:56 +01001416
Dave Jones78e70c22007-09-27 11:50:13 -04001417 libata.noacpi [LIBATA] Disables use of ACPI in libata suspend/resume
1418 when set.
1419 Format: <int>
1420
Tejun Heo33267322008-02-13 09:15:09 +09001421 libata.force= [LIBATA] Force configurations. The format is comma
1422 separated list of "[ID:]VAL" where ID is
Roman Fietze4c44f302010-04-21 12:17:12 +02001423 PORT[.DEVICE]. PORT and DEVICE are decimal numbers
Tejun Heo33267322008-02-13 09:15:09 +09001424 matching port, link or device. Basically, it matches
1425 the ATA ID string printed on console by libata. If
1426 the whole ID part is omitted, the last PORT and DEVICE
1427 values are used. If ID hasn't been specified yet, the
1428 configuration applies to all ports, links and devices.
1429
1430 If only DEVICE is omitted, the parameter applies to
1431 the port and all links and devices behind it. DEVICE
1432 number of 0 either selects the first device or the
1433 first fan-out link behind PMP device. It does not
1434 select the host link. DEVICE number of 15 selects the
1435 host link and device attached to it.
1436
1437 The VAL specifies the configuration to force. As long
1438 as there's no ambiguity shortcut notation is allowed.
1439 For example, both 1.5 and 1.5G would work for 1.5Gbps.
1440 The following configurations can be forced.
1441
1442 * Cable type: 40c, 80c, short40c, unk, ign or sata.
1443 Any ID with matching PORT is used.
1444
1445 * SATA link speed limit: 1.5Gbps or 3.0Gbps.
1446
1447 * Transfer mode: pio[0-7], mwdma[0-4] and udma[0-7].
1448 udma[/][16,25,33,44,66,100,133] notation is also
1449 allowed.
1450
1451 * [no]ncq: Turn on or off NCQ.
1452
Tejun Heo05944bd2008-08-13 20:19:09 +09001453 * nohrst, nosrst, norst: suppress hard, soft
1454 and both resets.
1455
Dan Williamsca6d43b2012-06-21 23:41:41 -07001456 * rstonce: only attempt one reset during
1457 hot-unplug link recovery
1458
Tejun Heo43c9c592010-05-23 12:59:11 +02001459 * dump_id: dump IDENTIFY data.
1460
Vincent Pelletier966fbe12013-05-21 22:30:58 +02001461 * atapi_dmadir: Enable ATAPI DMADIR bridge support
1462
Tejun Heo33267322008-02-13 09:15:09 +09001463 If there are multiple matching configurations changing
1464 the same attribute, the last one is used.
1465
Yinghai Lu95f72d12010-07-12 14:36:09 +10001466 memblock=debug [KNL] Enable memblock debug messages.
Randy Dunlap7c4be2532009-01-06 14:42:44 -08001467
Linus Torvalds1da177e2005-04-16 15:20:36 -07001468 load_ramdisk= [RAM] List of ramdisks to load from floppy
Randy Dunlap31c00fc2008-11-13 21:33:24 +00001469 See Documentation/blockdev/ramdisk.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001470
Randy Dunlapa6b25b62006-01-14 13:21:19 -08001471 lockd.nlm_grace_period=P [NFS] Assign grace period.
1472 Format: <integer>
Linus Torvalds1da177e2005-04-16 15:20:36 -07001473
Randy Dunlapa6b25b62006-01-14 13:21:19 -08001474 lockd.nlm_tcpport=N [NFS] Assign TCP port.
1475 Format: <integer>
1476
1477 lockd.nlm_timeout=T [NFS] Assign timeout value.
1478 Format: <integer>
1479
1480 lockd.nlm_udpport=M [NFS] Assign UDP port.
1481 Format: <integer>
Linus Torvalds1da177e2005-04-16 15:20:36 -07001482
1483 logibm.irq= [HW,MOUSE] Logitech Bus Mouse Driver
1484 Format: <irq>
1485
1486 loglevel= All Kernel Messages with a loglevel smaller than the
1487 console loglevel will be printed to the console. It can
1488 also be changed with klogd or other programs. The
1489 loglevels are defined as follows:
1490
1491 0 (KERN_EMERG) system is unusable
1492 1 (KERN_ALERT) action must be taken immediately
1493 2 (KERN_CRIT) critical conditions
1494 3 (KERN_ERR) error conditions
1495 4 (KERN_WARNING) warning conditions
1496 5 (KERN_NOTICE) normal but significant condition
1497 6 (KERN_INFO) informational
1498 7 (KERN_DEBUG) debug-level messages
1499
Randy Dunlapc756d082011-02-20 20:08:35 -08001500 log_buf_len=n[KMG] Sets the size of the printk ring buffer,
1501 in bytes. n must be a power of two. The default
1502 size is set in the kernel config file.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001503
Randy Dunlapaccaa242007-10-16 01:29:37 -07001504 logo.nologo [FB] Disables display of the built-in Linux logo.
1505 This may be used to provide more screen space for
1506 kernel log messages and is useful when debugging
1507 kernel boot problems.
1508
Linus Torvalds1da177e2005-04-16 15:20:36 -07001509 lp=0 [LP] Specify parallel ports to use, e.g,
1510 lp=port[,port...] lp=none,parport0 (lp0 not configured, lp1 uses
1511 lp=reset first parallel port). 'lp=0' disables the
1512 lp=auto printer driver. 'lp=reset' (which can be
1513 specified in addition to the ports) causes
1514 attached printers to be reset. Using
1515 lp=port1,port2,... specifies the parallel ports
1516 to associate lp devices with, starting with
1517 lp0. A port specification may be 'none' to skip
1518 that lp device, or a parport name such as
1519 'parport0'. Specifying 'lp=auto' instead of a
1520 port specification list means that device IDs
1521 from each port should be examined, to see if
1522 an IEEE 1284-compliant printer is attached; if
1523 so, the driver will manage that printer.
1524 See also header of drivers/char/lp.c.
1525
1526 lpj=n [KNL]
1527 Sets loops_per_jiffy to given constant, thus avoiding
1528 time-consuming boot-time autodetection (up to 250 ms per
1529 CPU). 0 enables autodetection (default). To determine
1530 the correct value for your kernel, boot with normal
1531 autodetection and see what value is printed. Note that
1532 on SMP systems the preset will be applied to all CPUs,
1533 which is likely to cause problems if your CPUs need
1534 significantly divergent settings. An incorrect value
1535 will cause delays in the kernel to be wrong, leading to
1536 unpredictable I/O errors and other breakage. Although
1537 unlikely, in the extreme case this might damage your
1538 hardware.
1539
1540 ltpc= [NET]
1541 Format: <io>,<irq>,<dma>
1542
Randy Dunlap16290242011-08-13 12:34:52 -07001543 machvec= [IA-64] Force the use of a particular machine-vector
Randy Dunlapa9913042005-10-23 12:57:11 -07001544 (machvec) in a generic kernel.
1545 Example: machvec=hpzx1_swiotlb
Linus Torvalds1da177e2005-04-16 15:20:36 -07001546
Wu Zhangjin3209e702009-07-02 23:27:12 +08001547 machtype= [Loongson] Share the same kernel image file between different
1548 yeeloong laptop.
1549 Example: machtype=lemote-yeeloong-2f-7inch
1550
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07001551 max_addr=nn[KMG] [KNL,BOOT,ia64] All physical memory greater
1552 than or equal to this physical address is ignored.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001553
1554 maxcpus= [SMP] Maximum number of processors that an SMP kernel
Len Brown61ec7562007-08-16 03:34:22 -04001555 should make use of. maxcpus=n : n >= 0 limits the
1556 kernel to using 'n' processors. n=0 is a special case,
1557 it is equivalent to "nosmp", which also disables
1558 the IO APIC.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001559
Kay Sieversd134b002011-07-31 22:08:04 +02001560 max_loop= [LOOP] The number of loop block devices that get
1561 (loop.max_loop) unconditionally pre-created at init time. The default
1562 number is configured by BLK_DEV_LOOP_MIN_COUNT. Instead
1563 of statically allocating a predefined number, loop
1564 devices can be requested on-demand with the
1565 /dev/loop-control interface.
Bob Picco2b2c3752005-06-29 18:00:00 -07001566
Alan Coxcd4f0ef2007-07-31 00:37:59 -07001567 mce [X86-32] Machine Check Exception
Linus Torvalds1da177e2005-04-16 15:20:36 -07001568
Uwe Hermann71cced62008-10-20 09:32:21 -07001569 mce=option [X86-64] See Documentation/x86/x86_64/boot-options.txt
Andi Kleen909dd322007-10-17 18:04:38 +02001570
Linus Torvalds1da177e2005-04-16 15:20:36 -07001571 md= [HW] RAID subsystems devices and level
1572 See Documentation/md.txt.
Randy Dunlapa9913042005-10-23 12:57:11 -07001573
Linus Torvalds1da177e2005-04-16 15:20:36 -07001574 mdacon= [MDA]
1575 Format: <first>,<last>
1576 Specifies range of consoles to be captured by the MDA.
Randy Dunlapa9913042005-10-23 12:57:11 -07001577
Linus Torvalds1da177e2005-04-16 15:20:36 -07001578 mem=nn[KMG] [KNL,BOOT] Force usage of a specific amount of memory
1579 Amount of memory to be used when the kernel is not able
1580 to see the whole system memory or for test.
Wen Congyangfbb97d82012-12-17 15:59:29 -08001581 [X86] Work as limiting max address. Use together
1582 with memmap= to avoid physical address space collisions.
1583 Without memmap= PCI devices could be placed at addresses
1584 belonging to unused RAM.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001585
Alan Coxcd4f0ef2007-07-31 00:37:59 -07001586 mem=nopentium [BUGS=X86-32] Disable usage of 4MB pages for kernel
Linus Torvalds1da177e2005-04-16 15:20:36 -07001587 memory.
1588
Paul Mundt6902aa82008-09-21 17:14:42 +09001589 memchunk=nn[KMG]
1590 [KNL,SH] Allow user to override the default size for
1591 per-device physically contiguous DMA buffers.
1592
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +05301593 memmap=exactmap [KNL,X86] Enable setting of an exact
Linus Torvalds1da177e2005-04-16 15:20:36 -07001594 E820 memory map, as specified by the user.
1595 Such memmap=exactmap lines can be constructed based on
1596 BIOS output or other requirements. See the memmap=nn@ss
1597 option description.
1598
1599 memmap=nn[KMG]@ss[KMG]
1600 [KNL] Force usage of a specific region of memory
1601 Region of memory to be used, from ss to ss+nn.
1602
1603 memmap=nn[KMG]#ss[KMG]
1604 [KNL,ACPI] Mark specific memory as ACPI data.
1605 Region of memory to be used, from ss to ss+nn.
1606
1607 memmap=nn[KMG]$ss[KMG]
1608 [KNL,ACPI] Mark specific memory as reserved.
1609 Region of memory to be used, from ss to ss+nn.
Pavel Machek13128482008-03-24 12:29:43 -07001610 Example: Exclude memory from 0x18690000-0x1869ffff
1611 memmap=64K$0x18690000
1612 or
1613 memmap=0x10000$0x18690000
Linus Torvalds1da177e2005-04-16 15:20:36 -07001614
Jeremy Fitzhardinge9f077872008-09-07 01:51:34 -07001615 memory_corruption_check=0/1 [X86]
1616 Some BIOSes seem to corrupt the first 64k of
1617 memory when doing things like suspend/resume.
1618 Setting this option will scan the memory
1619 looking for corruption. Enabling this will
1620 both detect corruption and prevent the kernel
1621 from using the memory being corrupted.
1622 However, its intended as a diagnostic tool; if
1623 repeatable BIOS-originated corruption always
1624 affects the same memory, you can use memmap=
1625 to prevent the kernel from using that memory.
1626
1627 memory_corruption_check_size=size [X86]
1628 By default it checks for corruption in the low
1629 64k, making this memory unavailable for normal
1630 use. Use this parameter to scan for
1631 corruption in more or less memory.
1632
1633 memory_corruption_check_period=seconds [X86]
1634 By default it checks for corruption every 60
1635 seconds. Use this parameter to check at some
1636 other rate. 0 disables periodic checking.
1637
Yinghai Lucaadbdc2008-07-15 00:03:44 -07001638 memtest= [KNL,X86] Enable memtest
Yinghai Luc64df702008-03-21 18:56:19 -07001639 Format: <integer>
Yinghai Luc64df702008-03-21 18:56:19 -07001640 default : 0 <disable>
Andreas Herrmann9e5f6cf2009-02-25 11:30:45 +01001641 Specifies the number of memtest passes to be
1642 performed. Each pass selects another test
1643 pattern from a given set of patterns. Memtest
1644 fills the memory with this pattern, validates
1645 memory contents and reserves bad memory
1646 regions that are detected.
Yinghai Luc64df702008-03-21 18:56:19 -07001647
Linus Torvalds1da177e2005-04-16 15:20:36 -07001648 meye.*= [HW] Set MotionEye Camera parameters
1649 See Documentation/video4linux/meye.txt.
1650
Andres Salomon8f368812007-10-12 23:04:06 +02001651 mfgpt_irq= [IA-32] Specify the IRQ to use for the
1652 Multi-Function General Purpose Timers on AMD Geode
1653 platforms.
1654
Willy Tarreaue6c4dc62008-01-30 13:33:33 +01001655 mfgptfix [X86-32] Fix MFGPT timers on AMD Geode platforms when
1656 the BIOS has incorrectly applied a workaround. TinyBIOS
1657 version 0.98 is known to be affected, 0.99 fixes the
1658 problem by letting the user disable the workaround.
1659
Linus Torvalds1da177e2005-04-16 15:20:36 -07001660 mga= [HW,DRM]
1661
Randy Dunlap1c207f92008-11-19 15:36:16 -08001662 min_addr=nn[KMG] [KNL,BOOT,ia64] All physical memory below this
1663 physical address is ignored.
1664
Michel Pollet39f45d72009-05-20 11:10:31 +01001665 mini2440= [ARM,HW,KNL]
1666 Format:[0..2][b][c][t]
1667 Default: "0tb"
1668 MINI2440 configuration specification:
1669 0 - The attached screen is the 3.5" TFT
1670 1 - The attached screen is the 7" TFT
1671 2 - The VGA Shield is attached (1024x768)
1672 Leaving out the screen size parameter will not load
1673 the TFT driver, and the framebuffer will be left
1674 unconfigured.
1675 b - Enable backlight. The TFT backlight pin will be
1676 linked to the kernel VESA blanking code and a GPIO
1677 LED. This parameter is not necessary when using the
1678 VGA shield.
1679 c - Enable the s3c camera interface.
1680 t - Reserved for enabling touchscreen support. The
1681 touchscreen support is not enabled in the mainstream
1682 kernel as of 2.6.30, a preliminary port can be found
1683 in the "bleeding edge" mini2440 support kernel at
1684 http://repo.or.cz/w/linux-2.6/mini2440.git
1685
Mel Gorman6b74ab92008-07-23 21:26:49 -07001686 mminit_loglevel=
1687 [KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this
1688 parameter allows control of the logging verbosity for
1689 the additional memory initialisation checks. A value
1690 of 0 disables mminit logging and a level of 4 will
1691 log everything. Information is printed at KERN_DEBUG
1692 so loglevel=8 may also need to be specified.
1693
Rusty Russell106a4ee2012-09-26 10:09:40 +01001694 module.sig_enforce
1695 [KNL] When CONFIG_MODULE_SIG is set, this means that
1696 modules without (valid) signatures will fail to load.
Paul Bolle2a039be2013-03-25 20:42:06 +01001697 Note that if CONFIG_MODULE_SIG_FORCE is set, that
Rusty Russell106a4ee2012-09-26 10:09:40 +01001698 is always true, so this option does nothing.
1699
Linus Torvalds1da177e2005-04-16 15:20:36 -07001700 mousedev.tap_time=
1701 [MOUSE] Maximum time between finger touching and
1702 leaving touchpad surface for touch to be considered
1703 a tap and be reported as a left button click (for
1704 touchpads working in absolute mode only).
1705 Format: <msecs>
1706 mousedev.xres= [MOUSE] Horizontal screen resolution, used for devices
1707 reporting absolute coordinates, such as tablets
1708 mousedev.yres= [MOUSE] Vertical screen resolution, used for devices
1709 reporting absolute coordinates, such as tablets
1710
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +05301711 movablecore=nn[KMG] [KNL,X86,IA-64,PPC] This parameter
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07001712 is similar to kernelcore except it specifies the
1713 amount of memory used for migratable allocations.
1714 If both kernelcore and movablecore is specified,
1715 then kernelcore will be at *least* the specified
1716 value but may be more. If movablecore on its own
1717 is specified, the administrator must be careful
1718 that the amount of memory usable for all allocations
1719 is not too small.
1720
Linus Torvalds1da177e2005-04-16 15:20:36 -07001721 MTD_Partition= [MTD]
1722 Format: <name>,<region-number>,<size>,<offset>
1723
Randy Dunlapa9913042005-10-23 12:57:11 -07001724 MTD_Region= [MTD] Format:
1725 <name>,<region-number>[,<base>,<size>,<buswidth>,<altbuswidth>]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001726
1727 mtdparts= [MTD]
Randy Dunlapc8facbb2007-07-31 00:37:40 -07001728 See drivers/mtd/cmdlinepart.c.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001729
Will Schmidt4e89a2d2010-09-28 15:33:12 +00001730 multitce=off [PPC] This parameter disables the use of the pSeries
1731 firmware feature for updating multiple TCE entries
1732 at a time.
1733
Rohit Hagargundgi5988af22009-05-12 13:46:57 -07001734 onenand.bdry= [HW,MTD] Flex-OneNAND Boundary Configuration
1735
1736 Format: [die0_boundary][,die0_lock][,die1_boundary][,die1_lock]
1737
1738 boundary - index of last SLC block on Flex-OneNAND.
1739 The remaining blocks are configured as MLC blocks.
1740 lock - Configure if Flex-OneNAND boundary should be locked.
1741 Once locked, the boundary cannot be changed.
1742 1 indicates lock status, 0 indicates unlock status.
1743
Ben Dooks9db829f2008-07-03 11:24:29 +01001744 mtdset= [ARM]
1745 ARM/S3C2412 JIVE boot control
1746
1747 See arch/arm/mach-s3c2412/mach-jive.c
1748
Linus Torvalds1da177e2005-04-16 15:20:36 -07001749 mtouchusb.raw_coordinates=
Randy Dunlapa9913042005-10-23 12:57:11 -07001750 [HW] Make the MicroTouch USB driver use raw coordinates
1751 ('y', default) or cooked coordinates ('n')
Linus Torvalds1da177e2005-04-16 15:20:36 -07001752
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07001753 mtrr_chunk_size=nn[KMG] [X86]
Matt LaPlante19f59462009-04-27 15:06:31 +02001754 used for mtrr cleanup. It is largest continuous chunk
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07001755 that could hold holes aka. UC entries.
1756
1757 mtrr_gran_size=nn[KMG] [X86]
1758 Used for mtrr cleanup. It is granularity of mtrr block.
1759 Default is 1.
1760 Large value could prevent small alignment from
1761 using up MTRRs.
1762
1763 mtrr_spare_reg_nr=n [X86]
1764 Format: <integer>
1765 Range: 0,7 : spare reg number
1766 Default : 1
1767 Used for mtrr cleanup. It is spare mtrr entries number.
1768 Set to 2 or more if your graphical card needs more.
1769
Linus Torvalds1da177e2005-04-16 15:20:36 -07001770 n2= [NET] SDL Inc. RISCom/N2 synchronous serial card
1771
Linus Torvalds1da177e2005-04-16 15:20:36 -07001772 netdev= [NET] Network devices parameters
1773 Format: <irq>,<io>,<mem_start>,<mem_end>,<name>
1774 Note that mem_start is often overloaded to mean
1775 something different and driver-specific.
Randy Dunlapa9913042005-10-23 12:57:11 -07001776 This usage is only documented in each driver source
1777 file if at all.
1778
Krzysztof Piotr Oledzki58401572008-07-21 10:01:34 -07001779 nf_conntrack.acct=
1780 [NETFILTER] Enable connection tracking flow accounting
1781 0 to disable accounting
1782 1 to enable accounting
Tim Gardnerd70a0112010-06-25 14:46:56 +02001783 Default value is 0.
Krzysztof Piotr Oledzki58401572008-07-21 10:01:34 -07001784
Chuck Lever306a0752010-09-17 10:54:37 -04001785 nfsaddrs= [NFS] Deprecated. Use ip= instead.
J. Bruce Fieldsdc7a0812009-10-27 14:41:35 -04001786 See Documentation/filesystems/nfs/nfsroot.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001787
1788 nfsroot= [NFS] nfs root filesystem for disk-less boxes.
J. Bruce Fieldsdc7a0812009-10-27 14:41:35 -04001789 See Documentation/filesystems/nfs/nfsroot.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001790
Chuck Lever306a0752010-09-17 10:54:37 -04001791 nfsrootdebug [NFS] enable nfsroot debugging messages.
1792 See Documentation/filesystems/nfs/nfsroot.txt.
1793
Trond Myklebusta72b4422006-01-03 09:55:41 +01001794 nfs.callback_tcpport=
1795 [NFS] set the TCP port on which the NFSv4 callback
1796 channel should listen.
1797
Trond Myklebuste571cbf2009-08-19 18:12:27 -04001798 nfs.cache_getent=
1799 [NFS] sets the pathname to the program which is used
1800 to update the NFS client cache entries.
1801
1802 nfs.cache_getent_timeout=
1803 [NFS] sets the timeout after which an attempt to
1804 update a cache entry is deemed to have failed.
1805
Trond Myklebust58df0952006-01-03 09:55:57 +01001806 nfs.idmap_cache_timeout=
1807 [NFS] set the maximum lifetime for idmapper cache
1808 entries.
1809
Trond Myklebustf43bf0b2007-10-09 12:01:04 -04001810 nfs.enable_ino64=
1811 [NFS] enable 64-bit inode numbers.
1812 If zero, the NFS client will fake up a 32-bit inode
1813 number for the readdir() and stat() syscalls instead
1814 of returning the full 64-bit number.
1815 The default is to return 64-bit inode numbers.
1816
Trond Myklebustef159e92012-02-06 19:50:40 -05001817 nfs.max_session_slots=
1818 [NFSv4.1] Sets the maximum number of session slots
1819 the client will attempt to negotiate with the server.
1820 This limits the number of simultaneous RPC requests
1821 that the client can send to the NFSv4.1 server.
1822 Note that there is little point in setting this
1823 value higher than the max_tcp_slot_table_limit.
1824
Trond Myklebustb064eca22011-02-22 15:44:32 -08001825 nfs.nfs4_disable_idmapping=
Trond Myklebust074b1d12012-01-09 13:46:26 -05001826 [NFSv4] When set to the default of '1', this option
1827 ensures that both the RPC level authentication
1828 scheme and the NFS level operations agree to use
1829 numeric uids/gids if the mount is using the
1830 'sec=sys' security flavour. In effect it is
1831 disabling idmapping, which can make migration from
1832 legacy NFSv2/v3 systems to NFSv4 easier.
1833 Servers that do not support this mode of operation
1834 will be autodetected by the client, and it will fall
1835 back to using the idmapper.
1836 To turn off this behaviour, set the value to '0'.
Chuck Lever6f2ea7f2012-09-14 17:24:41 -04001837 nfs.nfs4_unique_id=
1838 [NFS4] Specify an additional fixed unique ident-
1839 ification string that NFSv4 clients can insert into
1840 their nfs_client_id4 string. This is typically a
1841 UUID that is generated at system install time.
Trond Myklebustb064eca22011-02-22 15:44:32 -08001842
Weston Andros Adamsondb8ac8b2012-02-17 15:20:24 -05001843 nfs.send_implementation_id =
1844 [NFSv4.1] Send client implementation identification
1845 information in exchange_id requests.
1846 If zero, no implementation identification information
1847 will be sent.
1848 The default is to send the implementation identification
1849 information.
Trond Myklebustf6de7a32013-09-04 10:08:54 -04001850
1851 nfs.recover_lost_locks =
1852 [NFSv4] Attempt to recover locks that were lost due
1853 to a lease timeout on the server. Please note that
1854 doing this risks data corruption, since there are
1855 no guarantees that the file will remain unchanged
1856 after the locks are lost.
1857 If you want to enable the kernel legacy behaviour of
1858 attempting to recover these locks, then set this
1859 parameter to '1'.
1860 The default parameter value of '0' causes the kernel
1861 not to attempt recovery of lost locks.
Weston Andros Adamsondb8ac8b2012-02-17 15:20:24 -05001862
J. Bruce Fieldse9541ce2012-03-22 16:07:18 -04001863 nfsd.nfs4_disable_idmapping=
1864 [NFSv4] When set to the default of '1', the NFSv4
1865 server will return only numeric uids and gids to
1866 clients using auth_sys, and will accept numeric uids
1867 and gids from such clients. This is intended to ease
1868 migration from NFSv2/v3.
Weston Andros Adamsondb8ac8b2012-02-17 15:20:24 -05001869
Sachin Bhamare18d98f62012-03-19 20:47:58 -07001870 objlayoutdriver.osd_login_prog=
1871 [NFS] [OBJLAYOUT] sets the pathname to the program which
1872 is used to automatically discover and login into new
1873 osd-targets. Please see:
1874 Documentation/filesystems/pnfs.txt for more explanations
1875
Paul Mundt1e1030d2009-09-01 17:38:32 +09001876 nmi_debug= [KNL,AVR32,SH] Specify one or more actions to take
Haavard Skinnemoene7ba1762007-10-10 14:58:29 +02001877 when a NMI is triggered.
1878 Format: [state][,regs][,debounce][,die]
1879
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +05301880 nmi_watchdog= [KNL,BUGS=X86] Debugging features for SMP kernels
Don Zickusfef2c9b2011-03-22 16:34:16 -07001881 Format: [panic,][nopanic,][num]
Don Zickus5dc30552010-11-29 17:07:17 -05001882 Valid num: 0
Cyrill Gorcunov5b9a0e12008-11-01 18:06:51 +03001883 0 - turn nmi_watchdog off
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07001884 When panic is specified, panic when an NMI watchdog
Don Zickusfef2c9b2011-03-22 16:34:16 -07001885 timeout occurs (or 'nopanic' to override the opposite
1886 default).
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07001887 This is useful when you use a panic=... timeout and
1888 need the box quickly up again.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001889
Anton Vorontsovbff38772009-07-08 11:10:56 -07001890 netpoll.carrier_timeout=
1891 [NET] Specifies amount of time (in seconds) that
1892 netpoll should wait for a carrier. By default netpoll
1893 waits 4 seconds.
1894
Alan Coxcd4f0ef2007-07-31 00:37:59 -07001895 no387 [BUGS=X86-32] Tells the kernel to use the 387 maths
Linus Torvalds1da177e2005-04-16 15:20:36 -07001896 emulation library even if a 387 maths coprocessor
1897 is present.
1898
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07001899 no_console_suspend
1900 [HW] Never suspend the console
1901 Disable suspending of consoles during suspend and
1902 hibernate operations. Once disabled, debugging
1903 messages can reach various consoles while the rest
1904 of the system is being put to sleep (ie, while
1905 debugging driver suspend/resume hooks). This may
1906 not work reliably with all consoles, but is known
1907 to work with serial and VGA consoles.
Yanmin Zhang134620f2011-10-31 17:11:27 -07001908 To facilitate more flexible debugging, we also add
1909 console_suspend, a printk module parameter to control
1910 it. Users could use console_suspend (usually
1911 /sys/module/printk/parameters/console_suspend) to
1912 turn on/off it dynamically.
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07001913
Christoph Lameterc1aee212007-05-31 00:40:47 -07001914 noaliencache [MM, NUMA, SLAB] Disables the allocation of alien
1915 caches in the slab allocator. Saves per-node memory,
1916 but will impact performance.
Paul Menage3395ee02006-12-06 20:32:16 -08001917
Randy Dunlapa9913042005-10-23 12:57:11 -07001918 noalign [KNL,ARM]
1919
Linus Torvalds1da177e2005-04-16 15:20:36 -07001920 noapic [SMP,APIC] Tells the kernel to not make use of any
1921 IOAPICs that may be present in the system.
1922
Mike Galbraith5091faa2010-11-30 14:18:03 +01001923 noautogroup Disable scheduler automatic task group creation.
1924
Linus Torvalds1da177e2005-04-16 15:20:36 -07001925 nobats [PPC] Do not use BATs for mapping kernel lowmem
1926 on "Classic" PPC cores.
1927
1928 nocache [ARM]
Randy Dunlapa9913042005-10-23 12:57:11 -07001929
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07001930 noclflush [BUGS=X86] Don't use the CLFLUSH instruction
1931
Shailabh Nagar163ecdf2006-07-30 03:03:11 -07001932 nodelayacct [KNL] Disable per-task delay accounting
1933
Linus Torvalds1da177e2005-04-16 15:20:36 -07001934 nodisconnect [HW,SCSI,M68K] Disables SCSI disconnects.
1935
Paul Mundt6902aa82008-09-21 17:14:42 +09001936 nodsp [SH] Disable hardware DSP at boot time.
1937
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +05301938 noefi [X86] Disable EFI runtime services support.
Huang, Ying8b2cb7a2008-01-30 13:32:11 +01001939
Linus Torvalds1da177e2005-04-16 15:20:36 -07001940 noexec [IA-64]
1941
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +05301942 noexec [X86]
Jiri Slabyf5a1b192008-04-12 10:28:25 +02001943 On X86-32 available only on PAE configured kernels.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001944 noexec=on: enable non-executable mappings (default)
Jiri Slabyf5a1b192008-04-12 10:28:25 +02001945 noexec=off: disable non-executable mappings
1946
H. Peter Anvin52b61792012-09-21 12:43:13 -07001947 nosmap [X86]
1948 Disable SMAP (Supervisor Mode Access Prevention)
1949 even if it is supported by processor.
1950
Fenghua Yude5397a2011-05-11 16:51:05 -07001951 nosmep [X86]
H. Peter Anvin52b61792012-09-21 12:43:13 -07001952 Disable SMEP (Supervisor Mode Execution Prevention)
Fenghua Yude5397a2011-05-11 16:51:05 -07001953 even if it is supported by processor.
1954
Jiri Slabyf5a1b192008-04-12 10:28:25 +02001955 noexec32 [X86-64]
1956 This affects only 32-bit executables.
1957 noexec32=on: enable non-executable mappings (default)
1958 read doesn't imply executable mappings
1959 noexec32=off: disable non-executable mappings
1960 read implies executable mappings
Linus Torvalds1da177e2005-04-16 15:20:36 -07001961
Paul Mundt6902aa82008-09-21 17:14:42 +09001962 nofpu [SH] Disable hardware FPU at boot time.
1963
Alan Coxcd4f0ef2007-07-31 00:37:59 -07001964 nofxsr [BUGS=X86-32] Disables x86 floating point extended
Chuck Ebbert4f886512006-03-23 02:59:34 -08001965 register save and restore. The kernel will only save
1966 legacy floating-point registers on task switch.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001967
Suresh Siddha0c752a92009-05-22 12:17:45 -07001968 noxsave [BUGS=X86] Disables x86 extended register state save
1969 and restore using xsave. The kernel will fallback to
1970 enabling legacy floating-point and sse state.
1971
Suresh Siddha5d2bd702012-09-06 14:58:52 -07001972 eagerfpu= [X86]
Suresh Siddhae0022982012-09-10 10:32:32 -07001973 on enable eager fpu restore
Suresh Siddha5d2bd702012-09-06 14:58:52 -07001974 off disable eager fpu restore
Suresh Siddhae0022982012-09-10 10:32:32 -07001975 auto selects the default scheme, which automatically
1976 enables eagerfpu restore for xsaveopt.
Suresh Siddha5d2bd702012-09-06 14:58:52 -07001977
Paulius Zaleckas01a24d22009-03-31 13:55:44 +01001978 nohlt [BUGS=ARM,SH] Tells the kernel that the sleep(SH) or
1979 wfi(ARM) instruction doesn't work correctly and not to
1980 use it. This is also useful when using JTAG debugger.
Randy Dunlapa9913042005-10-23 12:57:11 -07001981
Serge E. Hallyn1f29fae2008-11-05 16:08:52 -06001982 no_file_caps Tells the kernel not to honor file capabilities. The
1983 only way then for a file to be executed with privilege
1984 is to be setuid root or executed by root.
1985
Linus Torvalds1da177e2005-04-16 15:20:36 -07001986 nohalt [IA-64] Tells the kernel not to use the power saving
1987 function PAL_HALT_LIGHT when idle. This increases
1988 power-consumption. On the positive side, it reduces
1989 interrupt wake-up latency, which may improve performance
1990 in certain environments such as networked servers or
1991 real-time systems.
1992
Thomas Gleixner79bf2bb2007-02-16 01:28:03 -08001993 nohz= [KNL] Boottime enable/disable dynamic ticks
1994 Valid arguments: on, off
1995 Default: on
1996
Frederic Weisbeckerc5bfece2013-04-12 16:45:34 +02001997 nohz_full= [KNL,BOOT]
1998 In kernels built with CONFIG_NO_HZ_FULL=y, set
Frederic Weisbeckera8318812012-12-18 17:32:19 +01001999 the specified list of CPUs whose tick will be stopped
Frederic Weisbecker0453b432013-03-27 02:18:34 +01002000 whenever possible. The boot CPU will be forced outside
2001 the range to maintain the timekeeping.
Frederic Weisbeckerd1e43fa2013-03-26 23:47:24 +01002002 The CPUs in this range must also be included in the
2003 rcu_nocbs= set.
Frederic Weisbeckera8318812012-12-18 17:32:19 +01002004
Paul Mundteeee7852009-04-02 12:31:16 +09002005 noiotrap [SH] Disables trapped I/O port accesses.
2006
Alan Coxcd4f0ef2007-07-31 00:37:59 -07002007 noirqdebug [X86-32] Disables the code which attempts to detect and
Linus Torvalds1da177e2005-04-16 15:20:36 -07002008 disable unhandled interrupt sources.
2009
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +05302010 no_timer_check [X86,APIC] Disables the code which tests for
Zachary Amsden8542b202006-12-07 02:14:09 +01002011 broken timer IRQ sources.
2012
Linus Torvalds1da177e2005-04-16 15:20:36 -07002013 noisapnp [ISAPNP] Disables ISA PnP code.
2014
2015 noinitrd [RAM] Tells the kernel not to load any configured
2016 initial RAM disk.
2017
Weidong Han03ea8152009-04-17 16:42:15 +08002018 nointremap [X86-64, Intel-IOMMU] Do not enable interrupt
2019 remapping.
Chris Wrightd1423d52010-07-20 11:06:49 -07002020 [Deprecated - use intremap=off]
Weidong Han03ea8152009-04-17 16:42:15 +08002021
Linus Torvalds1da177e2005-04-16 15:20:36 -07002022 nointroute [IA-64]
2023
Randy Dunlap16290242011-08-13 12:34:52 -07002024 nojitter [IA-64] Disables jitter checking for ITC timers.
Tony Luck0aa366f2007-07-20 11:22:30 -07002025
Jiri Kosina9cf4c4f2010-08-16 17:51:20 +02002026 no-kvmclock [X86,KVM] Disable paravirtualized KVM clock driver
2027
Gleb Natapovfd10cde2010-10-14 11:22:51 +02002028 no-kvmapf [X86,KVM] Disable paravirtualized asynchronous page
2029 fault handling.
2030
Glauber Costad910f5c2011-07-11 15:28:19 -04002031 no-steal-acc [X86,KVM] Disable paravirtualized steal time accounting.
2032 steal time is computed, but won't influence scheduler
2033 behaviour
2034
Alan Coxcd4f0ef2007-07-31 00:37:59 -07002035 nolapic [X86-32,APIC] Do not enable or use the local APIC.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002036
Alan Coxcd4f0ef2007-07-31 00:37:59 -07002037 nolapic_timer [X86-32,APIC] Do not use the local APIC timer.
Thomas Gleixnerad62ca22007-03-22 00:11:21 -08002038
Linus Torvalds1da177e2005-04-16 15:20:36 -07002039 noltlbs [PPC] Do not use large page/tlb entries for kernel
2040 lowmem mapping on PPC40x.
2041
Horms312f1f02006-02-22 09:57:55 +09002042 nomca [IA-64] Disable machine check abort handling
2043
Alan Coxcd4f0ef2007-07-31 00:37:59 -07002044 nomce [X86-32] Machine Check Exception
Hormsabe37e52006-04-01 01:36:09 +02002045
Andres Salomon83d73842007-10-12 23:04:06 +02002046 nomfgpt [X86-32] Disable Multi-Function General Purpose
2047 Timer usage (for AMD Geode machines).
2048
Don Zickusbda62632011-10-13 15:14:27 -04002049 nonmi_ipi [X86] Disable using NMI IPIs during panic/reboot to
2050 shutdown the other cpus. Instead use the REBOOT_VECTOR
2051 irq.
2052
Dave Young02608be2012-02-01 10:33:14 +08002053 nomodule Disable module load
2054
Jiri Kosina016ddd92010-01-18 17:05:40 +01002055 nopat [X86] Disable PAT (page attribute table extension of
2056 pagetables) support.
2057
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07002058 norandmaps Don't use address space randomization. Equivalent to
2059 echo 0 > /proc/sys/kernel/randomize_va_space
2060
Jiri Kosinabbff2162010-08-11 18:34:09 +02002061 noreplace-paravirt [X86,IA-64,PV_OPS] Don't patch paravirt_ops
Jeremy Fitzhardinge959b4fd2007-05-02 19:27:16 +02002062
Alan Coxcd4f0ef2007-07-31 00:37:59 -07002063 noreplace-smp [X86-32,SMP] Don't replace SMP instructions
Jeremy Fitzhardingeb7fb4af2007-05-02 19:27:13 +02002064 with UP alternatives
2065
H. Peter Anvin49d859d2011-07-31 14:02:19 -07002066 nordrand [X86] Disable the direct use of the RDRAND
2067 instruction even if it is supported by the
2068 processor. RDRAND is still available to user
2069 space applications.
2070
Randy Dunlapa9913042005-10-23 12:57:11 -07002071 noresume [SWSUSP] Disables resume and restores original swap
2072 space.
2073
Linus Torvalds1da177e2005-04-16 15:20:36 -07002074 no-scroll [VGA] Disables scrollback.
2075 This is required for the Braillex ib80-piezo Braille
2076 reader made by F.H. Papenmeier (Germany).
2077
2078 nosbagart [IA-64]
2079
Alan Coxcd4f0ef2007-07-31 00:37:59 -07002080 nosep [BUGS=X86-32] Disables x86 SYSENTER/SYSEXIT support.
Chuck Ebbert4f886512006-03-23 02:59:34 -08002081
Len Brown61ec7562007-08-16 03:34:22 -04002082 nosmp [SMP] Tells an SMP kernel to act as a UP kernel,
2083 and disable the IO APIC. legacy for "maxcpus=0".
Linus Torvalds1da177e2005-04-16 15:20:36 -07002084
Dave Jones97842212007-07-15 23:41:05 -07002085 nosoftlockup [KNL] Disable the soft-lockup detector.
2086
Linus Torvalds1da177e2005-04-16 15:20:36 -07002087 nosync [HW,M68K] Disables sync negotiation for all devices.
2088
Alan Coxcd4f0ef2007-07-31 00:37:59 -07002089 notsc [BUGS=X86-32] Disable Time Stamp Counter
Linus Torvalds1da177e2005-04-16 15:20:36 -07002090
2091 nousb [USB] Disable the USB subsystem
2092
Ben Hutchings55142372011-01-02 23:02:42 +00002093 nowatchdog [KNL] Disable the lockup detector (NMI watchdog).
Don Zickus58687ac2010-05-07 17:11:44 -04002094
Linus Torvalds1da177e2005-04-16 15:20:36 -07002095 nowb [ARM]
Randy Dunlapa9913042005-10-23 12:57:11 -07002096
Weidong Han2b2fd872009-04-17 16:42:12 +08002097 nox2apic [X86-64,APIC] Do not enable x2APIC mode.
2098
Fenghua Yuf78cff42012-11-13 11:32:38 -08002099 cpu0_hotplug [X86] Turn on CPU0 hotplug feature when
2100 CONFIG_BOOTPARAM_HOTPLUG_CPU0 is off.
2101 Some features depend on CPU0. Known dependencies are:
2102 1. Resume from suspend/hibernate depends on CPU0.
2103 Suspend/hibernate will fail if CPU0 is offline and you
2104 need to online CPU0 before suspend/hibernate.
2105 2. PIC interrupts also depend on CPU0. CPU0 can't be
2106 removed if a PIC interrupt is detected.
2107 It's said poweroff/reboot may depend on CPU0 on some
2108 machines although I haven't seen such issues so far
2109 after CPU0 is offline on a few tested machines.
2110 If the dependencies are under your control, you can
2111 turn on cpu0_hotplug.
2112
Randy Dunlap16290242011-08-13 12:34:52 -07002113 nptcg= [IA-64] Override max number of concurrent global TLB
Fenghua Yua6c75b862008-03-14 13:57:08 -07002114 purges which is reported from either PAL_VM_SUMMARY or
2115 SAL PALO.
2116
Yinghai Lu2b633e32010-02-10 01:20:37 -08002117 nr_cpus= [SMP] Maximum number of processors that an SMP kernel
2118 could support. nr_cpus=n : n >= 1 limits the kernel to
2119 supporting 'n' processors. Later in runtime you can not
2120 use hotplug cpu feature to put more cpu back to online.
2121 just like you compile the kernel NR_CPUS=n
2122
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07002123 nr_uarts= [SERIAL] maximum number of UARTs to be registered.
2124
Mel Gorman1a687c22012-11-22 11:16:36 +00002125 numa_balancing= [KNL,X86] Enable or disable automatic NUMA balancing.
2126 Allowed values are enable and disable
2127
KAMEZAWA Hiroyukif0c0b2b2007-07-15 23:38:01 -07002128 numa_zonelist_order= [KNL, BOOT] Select zonelist order for NUMA.
2129 one of ['zone', 'node', 'default'] can be specified
2130 This can be set from sysctl after boot.
2131 See Documentation/sysctl/vm.txt for details.
2132
Randy Dunlap7c4be2532009-01-06 14:42:44 -08002133 ohci1394_dma=early [HW] enable debugging via the ohci1394 driver.
2134 See Documentation/debugging-via-ohci1394.txt for more
2135 info.
2136
Andres Salomon3ef0e1f2008-04-29 00:59:53 -07002137 olpc_ec_timeout= [OLPC] ms delay when issuing EC commands
2138 Rather than timing out after 20 ms if an EC
2139 command is not properly ACKed, override the length
2140 of the timeout. We have interrupts disabled while
2141 waiting for the ACK, so if this is set too high
2142 interrupts *may* be lost!
2143
Tony Lindgren15ac7af2009-12-11 16:16:32 -08002144 omap_mux= [OMAP] Override bootloader pin multiplexing.
2145 Format: <mux_mode0.mode_name=value>...
2146 For example, to override I2C bus2:
2147 omap_mux=i2c2_scl.i2c2_scl=0x100,i2c2_sda.i2c2_sda=0x100
2148
Linus Torvalds1da177e2005-04-16 15:20:36 -07002149 oprofile.timer= [HW]
2150 Use timer interrupt instead of performance counters
2151
Robert Richter7e4e0bd2009-05-06 12:10:23 +02002152 oprofile.cpu_type= Force an oprofile cpu type
2153 This might be useful if you have an older oprofile
2154 userland or if you want common events.
Robert Richter8d7ff4f2009-06-23 11:48:14 +02002155 Format: { arch_perfmon }
2156 arch_perfmon: [X86] Force use of architectural
Robert Richter7e4e0bd2009-05-06 12:10:23 +02002157 perfmon on Intel CPUs instead of the
2158 CPU specific event set.
Robert Richter159a80b2011-10-11 19:39:16 +02002159 timer: [X86] Force use of architectural NMI
2160 timer mode (see also oprofile.timer
2161 for generic hr timer mode)
Andreas Krebbeldd3c4672011-11-25 20:03:05 +01002162 [s390] Force legacy basic mode sampling
2163 (report cpu_type "timer")
Andi Kleen1dcdb5a2009-04-27 17:44:11 +02002164
Randy Dunlap44a4dcf2011-04-04 15:02:24 -07002165 oops=panic Always panic on oopses. Default is to just kill the
2166 process, but there is a small probability of
2167 deadlocking the machine.
Olaf Heringd404ab02011-03-22 16:34:04 -07002168 This will also cause panics on machine check exceptions.
2169 Useful together with panic=30 to trigger a reboot.
2170
Randy Dunlapbcfde332010-06-07 17:10:38 -07002171 OSS [HW,OSS]
2172 See Documentation/sound/oss/oss-parameters.txt
2173
Randy Dunlap44a4dcf2011-04-04 15:02:24 -07002174 panic= [KNL] Kernel behaviour on panic: delay <timeout>
Hugh Dickins4302fbc2011-07-26 16:08:52 -07002175 timeout > 0: seconds before rebooting
2176 timeout = 0: wait forever
2177 timeout < 0: reboot immediately
Linus Torvalds1da177e2005-04-16 15:20:36 -07002178 Format: <timeout>
2179
2180 parkbd.port= [HW] Parallel port number the keyboard adapter is
2181 connected to, default is 0.
2182 Format: <parport#>
2183 parkbd.mode= [HW] Parallel port keyboard adapter mode of operation,
2184 0 for XT, 1 for AT (default is AT).
Randy Dunlapa9913042005-10-23 12:57:11 -07002185 Format: <mode>
Linus Torvalds1da177e2005-04-16 15:20:36 -07002186
Randy Dunlapa9913042005-10-23 12:57:11 -07002187 parport= [HW,PPT] Specify parallel ports. 0 disables.
2188 Format: { 0 | auto | 0xBBB[,IRQ[,DMA]] }
2189 Use 'auto' to force the driver to use any
2190 IRQ/DMA settings detected (the default is to
2191 ignore detected IRQ/DMA settings because of
2192 possible conflicts). You can specify the base
2193 address, IRQ, and DMA settings; IRQ and DMA
2194 should be numbers, or 'auto' (for using detected
2195 settings on that particular port), or 'nofifo'
2196 (to avoid using a FIFO even if it is detected).
2197 Parallel ports are assigned in the order they
2198 are specified on the command line, starting
2199 with parport0.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002200
Randy Dunlapa9913042005-10-23 12:57:11 -07002201 parport_init_mode= [HW,PPT]
2202 Configure VIA parallel port to operate in
2203 a specific mode. This is necessary on Pegasos
2204 computer where firmware has no options for setting
2205 up parallel port mode and sets it to spp.
2206 Currently this function knows 686a and 8231 chips.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002207 Format: [spp|ps2|epp|ecp|ecpepp]
2208
Andrew Mortondd287792006-03-23 03:00:57 -08002209 pause_on_oops=
2210 Halt all CPUs after the first oops has been printed for
2211 the specified number of seconds. This is to be used if
2212 your oopses keep scrolling off the screen.
2213
Linus Torvalds1da177e2005-04-16 15:20:36 -07002214 pcbit= [HW,ISDN]
2215
2216 pcd. [PARIDE]
2217 See header of drivers/block/paride/pcd.c.
Randy Dunlap31c00fc2008-11-13 21:33:24 +00002218 See also Documentation/blockdev/paride.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002219
Randy Dunlapa9913042005-10-23 12:57:11 -07002220 pci=option[,option...] [PCI] various PCI subsystem options:
Bjorn Helgaas1cc0ca22009-01-14 10:04:36 -07002221 earlydump [X86] dump PCI config space before the kernel
2222 changes anything
Andi Kleenc0115602008-08-22 09:53:39 +02002223 off [X86] don't probe for the PCI bus
Alan Coxcd4f0ef2007-07-31 00:37:59 -07002224 bios [X86-32] force use of PCI BIOS, don't access
Randy Dunlapa9913042005-10-23 12:57:11 -07002225 the hardware directly. Use this if your machine
2226 has a non-standard PCI host bridge.
Alan Coxcd4f0ef2007-07-31 00:37:59 -07002227 nobios [X86-32] disallow use of PCI BIOS, only direct
Randy Dunlapa9913042005-10-23 12:57:11 -07002228 hardware access methods are allowed. Use this
2229 if you experience crashes upon bootup and you
2230 suspect they are caused by the BIOS.
Andi Kleenc0115602008-08-22 09:53:39 +02002231 conf1 [X86] Force use of PCI Configuration
Randy Dunlapa9913042005-10-23 12:57:11 -07002232 Mechanism 1.
Andi Kleenc0115602008-08-22 09:53:39 +02002233 conf2 [X86] Force use of PCI Configuration
Randy Dunlapa9913042005-10-23 12:57:11 -07002234 Mechanism 2.
Randy Dunlap7f785762007-10-05 13:17:58 -07002235 noaer [PCIE] If the PCIEAER kernel config parameter is
2236 enabled, this kernel boot option can be used to
2237 disable the use of PCIE advanced error reporting.
Jeff Garzik32a2eea2007-10-11 16:57:27 -04002238 nodomains [PCI] Disable support for multiple PCI
2239 root domains (aka PCI segments, in ACPI-speak).
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +05302240 nommconf [X86] Disable use of MMCONFIG for PCI
Bjorn Helgaas61be6d62006-02-15 15:17:43 -08002241 Configuration
Andreas Herrmann12983072009-06-07 16:15:16 +02002242 check_enable_amd_mmconf [X86] check for and enable
2243 properly configured MMIO access to PCI
2244 config space on AMD family 10h CPU
Matthew Wilcox309e57d2006-03-05 22:33:34 -07002245 nomsi [MSI] If the PCI_MSI kernel config parameter is
2246 enabled, this kernel boot option can be used to
2247 disable the use of MSI interrupts system-wide.
Stefan Assmanna9322f62008-06-11 16:35:14 +02002248 noioapicquirk [APIC] Disable all boot interrupt quirks.
2249 Safety option to keep boot IRQs enabled. This
2250 should never be necessary.
Stefan Assmann91979792008-06-11 16:35:15 +02002251 ioapicreroute [APIC] Enable rerouting of boot IRQs to the
2252 primary IO-APIC for bridges that cannot disable
2253 boot IRQs. This fixes a source of spurious IRQs
2254 when the system masks IRQs.
Stefan Assmann41b9eb22008-07-15 13:48:55 +02002255 noioapicreroute [APIC] Disable workaround that uses the
2256 boot IRQ equivalent of an IRQ that connects to
2257 a chipset where boot IRQs cannot be disabled.
2258 The opposite of ioapicreroute.
Alan Coxcd4f0ef2007-07-31 00:37:59 -07002259 biosirq [X86-32] Use PCI BIOS calls to get the interrupt
Randy Dunlapa9913042005-10-23 12:57:11 -07002260 routing table. These calls are known to be buggy
2261 on several machines and they hang the machine
2262 when used, but on other computers it's the only
2263 way to get the interrupt routing table. Try
2264 this option if the kernel is unable to allocate
2265 IRQs or discover secondary PCI buses on your
2266 motherboard.
Andi Kleenc0115602008-08-22 09:53:39 +02002267 rom [X86] Assign address space to expansion ROMs.
Randy Dunlapa9913042005-10-23 12:57:11 -07002268 Use with caution as certain devices share
2269 address decoders between ROMs and other
2270 resources.
Andi Kleenc0115602008-08-22 09:53:39 +02002271 norom [X86] Do not assign address space to
Gary Hadebb71ad82008-05-12 13:57:46 -07002272 expansion ROMs that do not already have
2273 BIOS assigned address ranges.
Mike Habeck7bd1c362010-05-12 11:14:32 -07002274 nobar [X86] Do not assign address space to the
2275 BARs that weren't assigned by the BIOS.
Andi Kleenc0115602008-08-22 09:53:39 +02002276 irqmask=0xMMMM [X86] Set a bit mask of IRQs allowed to be
Randy Dunlapa9913042005-10-23 12:57:11 -07002277 assigned automatically to PCI devices. You can
2278 make the kernel exclude IRQs of your ISA cards
2279 this way.
Andi Kleenc0115602008-08-22 09:53:39 +02002280 pirqaddr=0xAAAAA [X86] Specify the physical address
Randy Dunlapa9913042005-10-23 12:57:11 -07002281 of the PIRQ table (normally generated
2282 by the BIOS) if it is outside the
2283 F0000h-100000h range.
Andi Kleenc0115602008-08-22 09:53:39 +02002284 lastbus=N [X86] Scan all buses thru bus #N. Can be
Randy Dunlapa9913042005-10-23 12:57:11 -07002285 useful if the kernel is unable to find your
2286 secondary buses and you want to tell it
2287 explicitly which ones they are.
Andi Kleenc0115602008-08-22 09:53:39 +02002288 assign-busses [X86] Always assign all PCI bus
Randy Dunlapa9913042005-10-23 12:57:11 -07002289 numbers ourselves, overriding
2290 whatever the firmware may have done.
Andi Kleenc0115602008-08-22 09:53:39 +02002291 usepirqmask [X86] Honor the possible IRQ mask stored
Randy Dunlapa9913042005-10-23 12:57:11 -07002292 in the BIOS $PIR table. This is needed on
2293 some systems with broken BIOSes, notably
2294 some HP Pavilion N5400 and Omnibook XE3
2295 notebooks. This will have no effect if ACPI
2296 IRQ routing is enabled.
Andi Kleenc0115602008-08-22 09:53:39 +02002297 noacpi [X86] Do not use ACPI for IRQ routing
Randy Dunlapa9913042005-10-23 12:57:11 -07002298 or for PCI scanning.
Bjorn Helgaas7bc5e3f2010-02-23 10:24:41 -07002299 use_crs [X86] Use PCI host bridge window information
2300 from ACPI. On BIOSes from 2008 or later, this
2301 is enabled by default. If you need to use this,
2302 please report a bug.
2303 nocrs [X86] Ignore PCI host bridge windows from ACPI.
2304 If you need to use this, please report a bug.
Randy Dunlapa9913042005-10-23 12:57:11 -07002305 routeirq Do IRQ routing for all PCI devices.
2306 This is normally done in pci_enable_device(),
2307 so this option is a temporary workaround
2308 for broken drivers that don't call it.
Yinghai Lu13a6ddb2008-03-27 01:31:18 -07002309 skip_isa_align [X86] do not align io start addr, so can
2310 handle more pci cards
Randy Dunlapa9913042005-10-23 12:57:11 -07002311 firmware [ARM] Do not re-enumerate the bus but instead
2312 just use the configuration from the
2313 bootloader. This is currently used on
2314 IXP2000 systems where the bus has to be
2315 configured a certain way for adjunct CPUs.
Andi Kleen0637a702006-09-26 10:52:41 +02002316 noearly [X86] Don't do any early type 1 scanning.
2317 This might help on some broken boards which
2318 machine check when some devices' config space
2319 is read. But various workarounds are disabled
2320 and some IOMMU drivers will not work.
Matt Domsch6b4b78f2006-09-29 15:23:23 -05002321 bfsort Sort PCI devices into breadth-first order.
2322 This sorting is done to get a device
2323 order compatible with older (<= 2.4) kernels.
2324 nobfsort Don't sort PCI devices into breadth-first order.
Yijing Wangfa238712013-01-30 09:40:52 +08002325 pcie_bus_tune_off Disable PCIe MPS (Max Payload Size)
2326 tuning and use the BIOS-configured MPS defaults.
2327 pcie_bus_safe Set every device's MPS to the largest value
2328 supported by all devices below the root complex.
2329 pcie_bus_perf Set device MPS to the largest allowable MPS
2330 based on its parent bus. Also set MRRS (Max
2331 Read Request Size) to the largest supported
2332 value (no larger than the MPS that the device
2333 or bus can support) for best performance.
2334 pcie_bus_peer2peer Set every device's MPS to 128B, which
2335 every device is guaranteed to support. This
2336 configuration allows peer-to-peer DMA between
2337 any pair of devices, possibly at the cost of
2338 reduced performance. This also guarantees
2339 that hot-added devices will work.
Atsushi Nemoto4516a612007-02-05 16:36:06 -08002340 cbiosize=nn[KMG] The fixed amount of bus space which is
2341 reserved for the CardBus bridge's IO window.
2342 The default value is 256 bytes.
2343 cbmemsize=nn[KMG] The fixed amount of bus space which is
2344 reserved for the CardBus bridge's memory
2345 window. The default value is 64 megabytes.
Yuji Shimada32a9a6822009-03-16 17:13:39 +09002346 resource_alignment=
2347 Format:
2348 [<order of align>@][<domain>:]<bus>:<slot>.<func>[; ...]
2349 Specifies alignment and device to reassign
2350 aligned memory resources.
2351 If <order of align> is not specified,
2352 PAGE_SIZE is used as alignment.
2353 PCI-PCI bridge can be specified, if resource
2354 windows need to be expanded.
Andrew Patterson43c16402009-04-22 16:52:09 -06002355 ecrc= Enable/disable PCIe ECRC (transaction layer
2356 end-to-end CRC checking).
2357 bios: Use BIOS/firmware settings. This is the
2358 the default.
2359 off: Turn ECRC off
2360 on: Turn ECRC on.
Yijing Wang8c8803c2013-01-23 20:29:06 +08002361 hpiosize=nn[KMG] The fixed amount of bus space which is
2362 reserved for hotplug bridge's IO window.
2363 Default size is 256 bytes.
2364 hpmemsize=nn[KMG] The fixed amount of bus space which is
2365 reserved for hotplug bridge's memory window.
2366 Default size is 2 megabytes.
Yinghai Lub55438f2012-02-23 19:23:30 -08002367 realloc= Enable/disable reallocating PCI bridge resources
2368 if allocations done by BIOS are too small to
2369 accommodate resources required by all child
2370 devices.
2371 off: Turn realloc off
2372 on: Turn realloc on
2373 realloc same as realloc=on
Rafael J. Wysocki6748dcc2012-03-01 00:06:33 +01002374 noari do not use PCIe ARI.
Bjorn Helgaas284f5f92012-04-30 15:21:02 -06002375 pcie_scan_all Scan all possible PCIe devices. Otherwise we
2376 only look for one device below a PCIe downstream
2377 port.
Matt Domsch6b4b78f2006-09-29 15:23:23 -05002378
Chuck Ebberte5665a42008-09-24 20:40:34 -04002379 pcie_aspm= [PCIE] Forcibly enable or disable PCIe Active State Power
2380 Management.
2381 off Disable ASPM.
2382 force Enable ASPM even on devices that claim not to support it.
2383 WARNING: Forcing ASPM on may cause system lockups.
2384
MUNEDA Takahiro7570a332012-02-02 11:09:22 -05002385 pcie_hp= [PCIE] PCI Express Hotplug driver options:
2386 nomsi Do not use MSI for PCI Express Native Hotplug (this
2387 makes all PCIe ports use INTx for hotplug services).
2388
Rafael J. Wysocki79dd9182010-08-21 01:51:44 +02002389 pcie_ports= [PCIE] PCIe ports handling:
Rafael J. Wysocki28eb5f22010-08-21 22:02:38 +02002390 auto Ask the BIOS whether or not to use native PCIe services
2391 associated with PCIe ports (PME, hot-plug, AER). Use
2392 them only if that is allowed by the BIOS.
2393 native Use native PCIe services associated with PCIe ports
2394 unconditionally.
Rafael J. Wysocki79dd9182010-08-21 01:51:44 +02002395 compat Treat PCIe ports as PCI-to-PCI bridges, disable the PCIe
2396 ports driver.
2397
Rafael J. Wysockic7f48652010-02-17 23:39:08 +01002398 pcie_pme= [PCIE,PM] Native PCIe PME signaling options:
Rafael J. Wysockic39fae12010-02-17 23:40:07 +01002399 nomsi Do not use MSI for native PCIe PME signaling (this makes
Rafael J. Wysocki28eb5f22010-08-21 22:02:38 +02002400 all PCIe root ports use INTx for all services).
Rafael J. Wysockic7f48652010-02-17 23:39:08 +01002401
Linus Torvalds1da177e2005-04-16 15:20:36 -07002402 pcmv= [HW,PCMCIA] BadgePAD 4
2403
2404 pd. [PARIDE]
Randy Dunlap31c00fc2008-11-13 21:33:24 +00002405 See Documentation/blockdev/paride.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002406
2407 pdcchassis= [PARISC,HW] Disable/Enable PDC Chassis Status codes at
2408 boot time.
2409 Format: { 0 | 1 }
2410 See arch/parisc/kernel/pdc_chassis.c
2411
Tejun Heof58dc012009-08-14 15:00:50 +09002412 percpu_alloc= Select which percpu first chunk allocator to use.
Tejun Heoe933a732009-08-14 15:00:53 +09002413 Currently supported values are "embed" and "page".
2414 Archs may support subset or none of the selections.
2415 See comments in mm/percpu.c for details on each
2416 allocator. This parameter is primarily for debugging
2417 and performance comparison.
Tejun Heofa8a7092009-06-22 11:56:24 +09002418
Linus Torvalds1da177e2005-04-16 15:20:36 -07002419 pf. [PARIDE]
Randy Dunlap31c00fc2008-11-13 21:33:24 +00002420 See Documentation/blockdev/paride.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002421
2422 pg. [PARIDE]
Randy Dunlap31c00fc2008-11-13 21:33:24 +00002423 See Documentation/blockdev/paride.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002424
2425 pirq= [SMP,APIC] Manual mp-table setup
Uwe Hermann71cced62008-10-20 09:32:21 -07002426 See Documentation/x86/i386/IO-APIC.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002427
2428 plip= [PPT,NET] Parallel port network link
2429 Format: { parport<nr> | timid | 0 }
2430 See also Documentation/parport.txt.
2431
Randy Dunlap16290242011-08-13 12:34:52 -07002432 pmtmr= [X86] Manual setup of pmtmr I/O Port.
Thomas Gleixnerde32a242008-07-12 05:33:30 +02002433 Override pmtimer IOPort with a hex value.
2434 e.g. pmtmr=0x508
2435
Bjorn Helgaas96242112011-08-11 12:14:05 -06002436 pnp.debug=1 [PNP]
2437 Enable PNP debug messages (depends on the
2438 CONFIG_PNP_DEBUG_MESSAGES option). Change at run-time
2439 via /sys/module/pnp/parameters/debug. We always show
2440 current resource usage; turning this on also shows
2441 possible settings and some assignment information.
Bjorn Helgaas97ef0622008-08-19 16:53:41 -06002442
Linus Torvalds1da177e2005-04-16 15:20:36 -07002443 pnpacpi= [ACPI]
2444 { off }
2445
2446 pnpbios= [ISAPNP]
2447 { on | off | curr | res | no-curr | no-res }
2448
2449 pnp_reserve_irq=
2450 [ISAPNP] Exclude IRQs for the autoconfiguration
2451
2452 pnp_reserve_dma=
2453 [ISAPNP] Exclude DMAs for the autoconfiguration
2454
2455 pnp_reserve_io= [ISAPNP] Exclude I/O ports for the autoconfiguration
Randy Dunlapa9913042005-10-23 12:57:11 -07002456 Ranges are in pairs (I/O port base and size).
Linus Torvalds1da177e2005-04-16 15:20:36 -07002457
2458 pnp_reserve_mem=
Randy Dunlapa9913042005-10-23 12:57:11 -07002459 [ISAPNP] Exclude memory regions for the
2460 autoconfiguration.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002461 Ranges are in pairs (memory base and size).
2462
Randy Dunlap4af94f32009-04-17 18:30:28 -07002463 ports= [IP_VS_FTP] IPVS ftp helper module
2464 Default is 21.
2465 Up to 8 (IP_VS_APP_MAX_PORTS) ports
2466 may be specified.
2467 Format: <port>,<port>....
2468
Ingo Molnar45807a12007-07-15 23:40:10 -07002469 print-fatal-signals=
2470 [KNL] debug: print fatal signals
Naohiro Ooiwaf84d49b2009-11-09 00:46:42 +09002471
2472 If enabled, warn about various signal handling
2473 related application anomalies: too many signals,
2474 too many POSIX.1 timers, fatal signals causing a
2475 coredump - etc.
2476
2477 If you hit the warning due to signal overflow,
2478 you might want to try "ulimit -i unlimited".
2479
Ingo Molnar45807a12007-07-15 23:40:10 -07002480 default: off.
2481
Matthew Garrettc22ab332012-03-05 14:59:10 -08002482 printk.always_kmsg_dump=
2483 Trigger kmsg_dump for cases other than kernel oops or
2484 panics
2485 Format: <bool> (1/Y/y=enable, 0/N/n=disable)
2486 default: disabled
2487
Randy Dunlape84845c2007-07-15 23:40:25 -07002488 printk.time= Show timing data prefixed to each printk message line
2489 Format: <bool> (1/Y/y=enable, 0/N/n=disable)
2490
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07002491 processor.max_cstate= [HW,ACPI]
2492 Limit processor to maximum C-state
2493 max_cstate=9 overrides any DMI blacklist limit.
2494
2495 processor.nocst [HW,ACPI]
2496 Ignore the _CST method to determine C-states,
2497 instead using the legacy FADT method
2498
Linus Torvalds1da177e2005-04-16 15:20:36 -07002499 profile= [KNL] Enable kernel profiling via /proc/profile
Randy Dunlapa9913042005-10-23 12:57:11 -07002500 Format: [schedule,]<number>
2501 Param: "schedule" - profile schedule points.
2502 Param: <number> - step/bucket size as a power of 2 for
2503 statistical time based profiling.
Mel Gormanb3da2a72007-10-24 18:23:50 +02002504 Param: "sleep" - profile D-state sleeping (millisecs).
2505 Requires CONFIG_SCHEDSTATS
Dave Jonesc0fe2e62007-10-20 03:08:22 +02002506 Param: "kvm" - profile VM exits.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002507
Linus Torvalds1da177e2005-04-16 15:20:36 -07002508 prompt_ramdisk= [RAM] List of RAM disks to prompt for floppy disk
2509 before loading.
Randy Dunlap31c00fc2008-11-13 21:33:24 +00002510 See Documentation/blockdev/ramdisk.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002511
Randy Dunlapa9913042005-10-23 12:57:11 -07002512 psmouse.proto= [HW,MOUSE] Highest PS2 mouse protocol extension to
2513 probe for; one of (bare|imps|exps|lifebook|any).
Linus Torvalds1da177e2005-04-16 15:20:36 -07002514 psmouse.rate= [HW,MOUSE] Set desired mouse report rate, in reports
2515 per second.
Randy Dunlapa9913042005-10-23 12:57:11 -07002516 psmouse.resetafter= [HW,MOUSE]
2517 Try to reset the device after so many bad packets
Linus Torvalds1da177e2005-04-16 15:20:36 -07002518 (0 = never).
2519 psmouse.resolution=
2520 [HW,MOUSE] Set desired mouse resolution, in dpi.
2521 psmouse.smartscroll=
Randy Dunlapa9913042005-10-23 12:57:11 -07002522 [HW,MOUSE] Controls Logitech smartscroll autorepeat.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002523 0 = disabled, 1 = enabled (default).
2524
Matthew Garrettdee28e72011-07-21 16:57:55 -04002525 pstore.backend= Specify the name of the pstore backend to use
2526
Linus Torvalds1da177e2005-04-16 15:20:36 -07002527 pt. [PARIDE]
Randy Dunlap31c00fc2008-11-13 21:33:24 +00002528 See Documentation/blockdev/paride.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002529
Kay Sieversdc8c8582007-08-15 12:25:38 +02002530 pty.legacy_count=
2531 [KNL] Number of legacy pty's. Overwrites compiled-in
2532 default number.
2533
Randy Dunlap7d2c5022006-09-29 02:01:02 -07002534 quiet [KNL] Disable most log messages
Randy Dunlapa9913042005-10-23 12:57:11 -07002535
Linus Torvalds1da177e2005-04-16 15:20:36 -07002536 r128= [HW,DRM]
2537
2538 raid= [HW,RAID]
2539 See Documentation/md.txt.
2540
Randy Dunlapa9913042005-10-23 12:57:11 -07002541 ramdisk_blocksize= [RAM]
Randy Dunlap31c00fc2008-11-13 21:33:24 +00002542 See Documentation/blockdev/ramdisk.txt.
Randy Dunlapa9913042005-10-23 12:57:11 -07002543
Linus Torvalds1da177e2005-04-16 15:20:36 -07002544 ramdisk_size= [RAM] Sizes of RAM disks in kilobytes
Randy Dunlap31c00fc2008-11-13 21:33:24 +00002545 See Documentation/blockdev/ramdisk.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002546
Paul E. McKenney3fbfbf72012-08-19 21:35:53 -07002547 rcu_nocbs= [KNL,BOOT]
2548 In kernels built with CONFIG_RCU_NOCB_CPU=y, set
2549 the specified list of CPUs to be no-callback CPUs.
2550 Invocation of these CPUs' RCU callbacks will
Paul E. McKenneya4889852012-12-03 08:16:28 -08002551 be offloaded to "rcuox/N" kthreads created for
2552 that purpose, where "x" is "b" for RCU-bh, "p"
2553 for RCU-preempt, and "s" for RCU-sched, and "N"
2554 is the CPU number. This reduces OS jitter on the
Paul E. McKenney3fbfbf72012-08-19 21:35:53 -07002555 offloaded CPUs, which can be useful for HPC and
Paul E. McKenneya4889852012-12-03 08:16:28 -08002556
Paul E. McKenney3fbfbf72012-08-19 21:35:53 -07002557 real-time workloads. It can also improve energy
2558 efficiency for asymmetric multiprocessors.
2559
Paul Gortmaker1b0048a2012-12-20 13:19:22 -08002560 rcu_nocb_poll [KNL,BOOT]
Paul E. McKenney3fbfbf72012-08-19 21:35:53 -07002561 Rather than requiring that offloaded CPUs
2562 (specified by rcu_nocbs= above) explicitly
2563 awaken the corresponding "rcuoN" kthreads,
2564 make these kthreads poll for callbacks.
2565 This improves the real-time response for the
2566 offloaded CPUs by relieving them of the need to
2567 wake up the corresponding kthread, but degrades
2568 energy efficiency by requiring that the kthreads
2569 periodically wake up to do the polling.
2570
Paul E. McKenneydabb8aa2012-04-23 10:54:45 -07002571 rcutree.blimit= [KNL,BOOT]
Robert P. J. Day24aaef82008-02-03 15:20:26 +02002572 Set maximum number of finished RCU callbacks to process
2573 in one batch.
Dipankar Sarma21a1ea92006-03-07 21:55:33 -08002574
Paul E. McKenneyf885b7f2012-04-23 15:52:53 -07002575 rcutree.fanout_leaf= [KNL,BOOT]
2576 Increase the number of CPUs assigned to each
2577 leaf rcu_node structure. Useful for very large
2578 systems.
2579
Paul E. McKenneyc0f4dfd2012-12-28 11:30:36 -08002580 rcutree.jiffies_till_first_fqs= [KNL,BOOT]
2581 Set delay from grace-period initialization to
2582 first attempt to force quiescent states.
2583 Units are jiffies, minimum value is zero,
2584 and maximum value is HZ.
2585
2586 rcutree.jiffies_till_next_fqs= [KNL,BOOT]
2587 Set delay between subsequent attempts to force
2588 quiescent states. Units are jiffies, minimum
2589 value is one, and maximum value is HZ.
2590
Paul E. McKenneydabb8aa2012-04-23 10:54:45 -07002591 rcutree.qhimark= [KNL,BOOT]
Robert P. J. Day24aaef82008-02-03 15:20:26 +02002592 Set threshold of queued
Dipankar Sarma21a1ea92006-03-07 21:55:33 -08002593 RCU callbacks over which batch limiting is disabled.
2594
Paul E. McKenneydabb8aa2012-04-23 10:54:45 -07002595 rcutree.qlowmark= [KNL,BOOT]
Robert P. J. Day24aaef82008-02-03 15:20:26 +02002596 Set threshold of queued RCU callbacks below which
2597 batch limiting is re-enabled.
Dipankar Sarma21a1ea92006-03-07 21:55:33 -08002598
Paul E. McKenneydabb8aa2012-04-23 10:54:45 -07002599 rcutree.rcu_cpu_stall_suppress= [KNL,BOOT]
2600 Suppress RCU CPU stall warning messages.
2601
2602 rcutree.rcu_cpu_stall_timeout= [KNL,BOOT]
2603 Set timeout for RCU CPU stall warning messages.
2604
Paul E. McKenneyc0f4dfd2012-12-28 11:30:36 -08002605 rcutree.rcu_idle_gp_delay= [KNL,BOOT]
2606 Set wakeup interval for idle CPUs that have
2607 RCU callbacks (RCU_FAST_NO_HZ=y).
Paul E. McKenneyd40011f2012-06-26 20:45:57 -07002608
Paul E. McKenneyc0f4dfd2012-12-28 11:30:36 -08002609 rcutree.rcu_idle_lazy_gp_delay= [KNL,BOOT]
2610 Set wakeup interval for idle CPUs that have
2611 only "lazy" RCU callbacks (RCU_FAST_NO_HZ=y).
2612 Lazy RCU callbacks are those which RCU can
2613 prove do nothing more than free memory.
Paul E. McKenneyd40011f2012-06-26 20:45:57 -07002614
Paul E. McKenneydabb8aa2012-04-23 10:54:45 -07002615 rcutorture.fqs_duration= [KNL,BOOT]
2616 Set duration of force_quiescent_state bursts.
2617
2618 rcutorture.fqs_holdoff= [KNL,BOOT]
2619 Set holdoff time within force_quiescent_state bursts.
2620
2621 rcutorture.fqs_stutter= [KNL,BOOT]
2622 Set wait time between force_quiescent_state bursts.
2623
2624 rcutorture.irqreader= [KNL,BOOT]
2625 Test RCU readers from irq handlers.
2626
2627 rcutorture.n_barrier_cbs= [KNL,BOOT]
2628 Set callbacks/threads for rcu_barrier() testing.
2629
2630 rcutorture.nfakewriters= [KNL,BOOT]
2631 Set number of concurrent RCU writers. These just
2632 stress RCU, they don't participate in the actual
2633 test, hence the "fake".
2634
2635 rcutorture.nreaders= [KNL,BOOT]
2636 Set number of RCU readers.
2637
2638 rcutorture.onoff_holdoff= [KNL,BOOT]
2639 Set time (s) after boot for CPU-hotplug testing.
2640
2641 rcutorture.onoff_interval= [KNL,BOOT]
2642 Set time (s) between CPU-hotplug operations, or
2643 zero to disable CPU-hotplug testing.
2644
2645 rcutorture.shuffle_interval= [KNL,BOOT]
2646 Set task-shuffle interval (s). Shuffling tasks
2647 allows some CPUs to go into dyntick-idle mode
2648 during the rcutorture test.
2649
2650 rcutorture.shutdown_secs= [KNL,BOOT]
2651 Set time (s) after boot system shutdown. This
2652 is useful for hands-off automated testing.
2653
2654 rcutorture.stall_cpu= [KNL,BOOT]
2655 Duration of CPU stall (s) to test RCU CPU stall
2656 warnings, zero to disable.
2657
2658 rcutorture.stall_cpu_holdoff= [KNL,BOOT]
2659 Time to wait (s) after boot before inducing stall.
2660
2661 rcutorture.stat_interval= [KNL,BOOT]
2662 Time (s) between statistics printk()s.
2663
2664 rcutorture.stutter= [KNL,BOOT]
2665 Time (s) to stutter testing, for example, specifying
2666 five seconds causes the test to run for five seconds,
2667 wait for five seconds, and so on. This tests RCU's
2668 ability to transition abruptly to and from idle.
2669
2670 rcutorture.test_boost= [KNL,BOOT]
2671 Test RCU priority boosting? 0=no, 1=maybe, 2=yes.
2672 "Maybe" means test if the RCU implementation
2673 under test support RCU priority boosting.
2674
2675 rcutorture.test_boost_duration= [KNL,BOOT]
2676 Duration (s) of each individual boost test.
2677
2678 rcutorture.test_boost_interval= [KNL,BOOT]
2679 Interval (s) between each boost test.
2680
2681 rcutorture.test_no_idle_hz= [KNL,BOOT]
2682 Test RCU's dyntick-idle handling. See also the
2683 rcutorture.shuffle_interval parameter.
2684
2685 rcutorture.torture_type= [KNL,BOOT]
2686 Specify the RCU implementation to test.
2687
2688 rcutorture.verbose= [KNL,BOOT]
2689 Enable additional printk() statements.
2690
Olof Johanssonffdfc402005-09-06 15:17:19 -07002691 rdinit= [KNL]
2692 Format: <full_path>
2693 Run specified binary instead of /init from the ramdisk,
2694 used for early userspace startup. See initrd.
2695
Robin Holt1b3a5d02013-07-08 16:01:42 -07002696 reboot= [KNL]
2697 Format (x86 or x86_64):
2698 [w[arm] | c[old] | h[ard] | s[oft] | g[pio]] \
2699 [[,]s[mp]#### \
2700 [[,]b[ios] | a[cpi] | k[bd] | t[riple] | e[fi] | p[ci]] \
2701 [[,]f[orce]
2702 Where reboot_mode is one of warm (soft) or cold (hard) or gpio,
2703 reboot_type is one of bios, acpi, kbd, triple, efi, or pci,
2704 reboot_force is either force or not specified,
2705 reboot_cpu is s[mp]#### with #### being the processor
2706 to be used for rebooting.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002707
Paul Jackson46b6d942008-07-04 10:00:09 -07002708 relax_domain_level=
2709 [KNL, SMP] Set scheduler's default relax_domain_level.
Thadeu Lima de Souza Cascardo21acb9c2009-02-04 10:12:08 +01002710 See Documentation/cgroups/cpusets.txt.
Paul Jackson46b6d942008-07-04 10:00:09 -07002711
Linus Torvalds1da177e2005-04-16 15:20:36 -07002712 reserve= [KNL,BUGS] Force the kernel to ignore some iomem area
2713
Alan Coxcd4f0ef2007-07-31 00:37:59 -07002714 reservetop= [X86-32]
Zachary Amsden461a9af2006-09-25 23:32:25 -07002715 Format: nn[KMG]
2716 Reserves a hole at the top of the kernel virtual
2717 address space.
2718
H. Peter Anvin9ea77bd2010-08-25 16:38:20 -07002719 reservelow= [X86]
2720 Format: nn[K]
2721 Set the amount of memory to reserve for BIOS at
2722 the bottom of the address space.
2723
Vivek Goyal7e962872006-09-27 01:50:44 -07002724 reset_devices [KNL] Force drivers to reset the underlying device
2725 during initialization.
2726
Randy Dunlapa9913042005-10-23 12:57:11 -07002727 resume= [SWSUSP]
2728 Specify the partition device for software suspend
Minho Ban2df83fa2012-05-14 21:45:31 +02002729 Format:
2730 {/dev/<dev> | PARTUUID=<uuid> | <int>:<int> | <hex>}
Linus Torvalds1da177e2005-04-16 15:20:36 -07002731
Rafael J. Wysockiecbd0da2006-12-06 20:34:13 -08002732 resume_offset= [SWSUSP]
2733 Specify the offset from the beginning of the partition
2734 given by "resume=" at which the swap header is located,
2735 in <PAGE_SIZE> units (needed only for swap files).
2736 See Documentation/power/swsusp-and-swap-files.txt
2737
Barry Songf126f732011-10-10 23:38:41 +02002738 resumedelay= [HIBERNATION] Delay (in seconds) to pause before attempting to
2739 read the resume files
2740
Barry Song6f8d7022011-10-06 20:34:46 +02002741 resumewait [HIBERNATION] Wait (indefinitely) for resume device to show up.
2742 Useful for devices that are detected asynchronously
2743 (e.g. USB and MMC devices).
2744
Bojan Smojverf996fc92010-09-09 23:06:23 +02002745 hibernate= [HIBERNATION]
2746 noresume Don't check if there's a hibernation image
2747 present during boot.
2748 nocompress Don't compress/decompress hibernation images.
2749
Michael Neuling0a7b35cb2007-02-10 01:44:33 -08002750 retain_initrd [RAM] Keep initrd memory after extraction
2751
Linus Torvalds1da177e2005-04-16 15:20:36 -07002752 rhash_entries= [KNL,NET]
2753 Set number of hash buckets for route cache
2754
2755 riscom8= [HW,SERIAL]
2756 Format: <io_board1>[,<io_board2>[,...<io_boardN>]]
2757
2758 ro [KNL] Mount root device read-only on boot
2759
2760 root= [KNL] Root filesystem
Will Drewryf2d34fd2011-08-03 16:21:08 -07002761 See name_to_dev_t comment in init/do_mounts.c.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002762
2763 rootdelay= [KNL] Delay (in seconds) to pause before attempting to
2764 mount the root filesystem
2765
2766 rootflags= [KNL] Set root filesystem mount option string
2767
2768 rootfstype= [KNL] Set root filesystem type
2769
Pierre Ossmancc1ed752007-07-15 23:40:35 -07002770 rootwait [KNL] Wait (indefinitely) for root device to show up.
2771 Useful for devices that are detected asynchronously
2772 (e.g. USB and MMC devices).
2773
Robert Tivy5c71d612013-03-28 18:41:46 -07002774 rproc_mem=nn[KMG][@address]
2775 [KNL,ARM,CMA] Remoteproc physical memory block.
2776 Memory area to be used by remote processor image,
2777 managed by CMA.
2778
Linus Torvalds1da177e2005-04-16 15:20:36 -07002779 rw [KNL] Mount root device read-write on boot
2780
2781 S [KNL] Run init in single mode
2782
2783 sa1100ir [NET]
2784 See drivers/net/irda/sa1100_ir.c.
2785
Linus Torvalds1da177e2005-04-16 15:20:36 -07002786 sbni= [NET] Granch SBNI12 leased line adapter
Randy Dunlapa9913042005-10-23 12:57:11 -07002787
Mike Travisf6630112009-11-17 18:22:15 -06002788 sched_debug [KNL] Enables verbose scheduler debug messages.
2789
Mike Galbraith5307c952012-05-08 12:20:58 +02002790 skew_tick= [KNL] Offset the periodic timer tick per cpu to mitigate
2791 xtime_lock contention on larger systems, and/or RCU lock
2792 contention on all systems with CONFIG_MAXSMP set.
2793 Format: { "0" | "1" }
2794 0 -- disable. (may be 1 via CONFIG_CMDLINE="skew_tick=1"
2795 1 -- enable.
2796 Note: increases power consumption, thus should only be
2797 enabled if running jitter sensitive (HPC/RT) workloads.
2798
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07002799 security= [SECURITY] Choose a security module to enable at boot.
2800 If this boot parameter is not specified, only the first
2801 security module asking for security registration will be
2802 loaded. An invalid security module name will be treated
2803 as if no module has been chosen.
2804
2805 selinux= [SELINUX] Disable or enable SELinux at boot time.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002806 Format: { "0" | "1" }
2807 See security/selinux/Kconfig help text.
2808 0 -- disable.
2809 1 -- enable.
2810 Default value is set via kernel config option.
2811 If enabled at boot time, /selinux/disable can be used
2812 later to disable prior to initial policy load.
2813
John Johansenc1c124e2010-07-29 14:48:09 -07002814 apparmor= [APPARMOR] Disable or enable AppArmor at boot time
2815 Format: { "0" | "1" }
2816 See security/apparmor/Kconfig help text
2817 0 -- disable.
2818 1 -- enable.
2819 Default value is set via kernel config option.
2820
Alan Coxcd4f0ef2007-07-31 00:37:59 -07002821 serialnumber [BUGS=X86-32]
Linus Torvalds1da177e2005-04-16 15:20:36 -07002822
Linus Torvalds1da177e2005-04-16 15:20:36 -07002823 shapers= [NET]
2824 Maximal number of shapers.
Randy Dunlapa9913042005-10-23 12:57:11 -07002825
Yinghai Lub05f78f2008-08-22 01:32:50 -07002826 show_msr= [x86] show boot-time MSR settings
2827 Format: { <integer> }
2828 Show boot-time (BIOS-initialized) MSR settings.
2829 The parameter means the number of CPUs to show,
2830 for example 1 means boot CPU only.
2831
Linus Torvalds1da177e2005-04-16 15:20:36 -07002832 simeth= [IA-64]
2833 simscsi=
Randy Dunlapa9913042005-10-23 12:57:11 -07002834
Linus Torvalds1da177e2005-04-16 15:20:36 -07002835 slram= [HW,MTD]
2836
David Rientjes3df1ccc2011-10-18 22:09:28 -07002837 slab_max_order= [MM, SLAB]
2838 Determines the maximum allowed order for slabs.
2839 A high setting may cause OOMs due to memory
2840 fragmentation. Defaults to 1 for systems with
2841 more than 32MB of RAM, 0 otherwise.
2842
Christoph Lameterf0630ff2007-07-15 23:38:14 -07002843 slub_debug[=options[,slabs]] [MM, SLUB]
2844 Enabling slub_debug allows one to determine the
2845 culprit if slab objects become corrupted. Enabling
2846 slub_debug can create guard zones around objects and
2847 may poison objects when not in use. Also tracks the
2848 last alloc / free. For more information see
2849 Documentation/vm/slub.txt.
Christoph Lameterc1aee212007-05-31 00:40:47 -07002850
2851 slub_max_order= [MM, SLUB]
Christoph Lameterf0630ff2007-07-15 23:38:14 -07002852 Determines the maximum allowed order for slabs.
2853 A high setting may cause OOMs due to memory
2854 fragmentation. For more information see
2855 Documentation/vm/slub.txt.
Christoph Lameterc1aee212007-05-31 00:40:47 -07002856
2857 slub_min_objects= [MM, SLUB]
Christoph Lameterf0630ff2007-07-15 23:38:14 -07002858 The minimum number of objects per slab. SLUB will
2859 increase the slab order up to slub_max_order to
2860 generate a sufficiently large slab able to contain
2861 the number of objects indicated. The higher the number
2862 of objects the smaller the overhead of tracking slabs
2863 and the less frequently locks need to be acquired.
Christoph Lameterc1aee212007-05-31 00:40:47 -07002864 For more information see Documentation/vm/slub.txt.
2865
2866 slub_min_order= [MM, SLUB]
Masanari Iida24775d62012-02-15 00:26:42 +09002867 Determines the minimum page order for slabs. Must be
Christoph Lameterf0630ff2007-07-15 23:38:14 -07002868 lower than slub_max_order.
Christoph Lameterc1aee212007-05-31 00:40:47 -07002869 For more information see Documentation/vm/slub.txt.
2870
2871 slub_nomerge [MM, SLUB]
Christoph Lameterf0630ff2007-07-15 23:38:14 -07002872 Disable merging of slabs with similar size. May be
Christoph Lameterc1aee212007-05-31 00:40:47 -07002873 necessary if there is some reason to distinguish
Christoph Lameterf0630ff2007-07-15 23:38:14 -07002874 allocs to different slabs. Debug options disable
2875 merging on their own.
Christoph Lameterc1aee212007-05-31 00:40:47 -07002876 For more information see Documentation/vm/slub.txt.
2877
Linus Torvalds1da177e2005-04-16 15:20:36 -07002878 smart2= [HW]
2879 Format: <io1>[,<io2>[,...,<io8>]]
2880
Bjorn Helgaasd0d4f692007-05-08 00:36:05 -07002881 smsc-ircc2.nopnp [HW] Don't use PNP to discover SMC devices
2882 smsc-ircc2.ircc_cfg= [HW] Device configuration I/O port
2883 smsc-ircc2.ircc_sir= [HW] SIR base I/O port
2884 smsc-ircc2.ircc_fir= [HW] FIR base I/O port
2885 smsc-ircc2.ircc_irq= [HW] IRQ line
2886 smsc-ircc2.ircc_dma= [HW] DMA channel
2887 smsc-ircc2.ircc_transceiver= [HW] Transceiver type:
2888 0: Toshiba Satellite 1800 (GP data pin select)
2889 1: Fast pin select (default)
2890 2: ATC IRMode
2891
Ingo Molnar9c44bc02008-05-12 21:21:04 +02002892 softlockup_panic=
2893 [KNL] Should the soft-lockup detector generate panics.
Randy Dunlap44a4dcf2011-04-04 15:02:24 -07002894 Format: <integer>
Ingo Molnar9c44bc02008-05-12 21:21:04 +02002895
Linus Torvalds1da177e2005-04-16 15:20:36 -07002896 sonypi.*= [HW] Sony Programmable I/O Control Device driver
Paul Bolle395cf962011-08-15 02:02:26 +02002897 See Documentation/laptops/sonypi.txt
Linus Torvalds1da177e2005-04-16 15:20:36 -07002898
2899 specialix= [HW,SERIAL] Specialix multi-serial port adapter
Randy Dunlap31c00fc2008-11-13 21:33:24 +00002900 See Documentation/serial/specialix.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002901
2902 spia_io_base= [HW,MTD]
2903 spia_fio_base=
2904 spia_pedr=
2905 spia_peddr=
2906
Steven Rostedtf38f1d22008-12-16 23:06:40 -05002907 stacktrace [FTRACE]
2908 Enabled the stack tracer on boot up.
2909
Steven Rostedt762e1202011-12-19 22:01:00 -05002910 stacktrace_filter=[function-list]
2911 [FTRACE] Limit the functions that the stack tracer
2912 will trace at boot up. function-list is a comma separated
2913 list of functions. This list can be changed at run
2914 time by the stack_trace_filter file in the debugfs
2915 tracing directory. Note, this enables stack tracing
2916 and the stacktrace above is not needed.
2917
Linus Torvalds1da177e2005-04-16 15:20:36 -07002918 sti= [PARISC,HW]
2919 Format: <num>
2920 Set the STI (builtin display/keyboard on the HP-PARISC
2921 machines) console (graphic card) which should be used
2922 as the initial boot-console.
2923 See also comment in drivers/video/console/sticore.c.
2924
2925 sti_font= [HW]
2926 See comment in drivers/video/console/sticore.c.
2927
2928 stifb= [HW]
2929 Format: bpp:<bpp1>[:<bpp2>[:<bpp3>...]]
2930
Trond Myklebustcbf11072009-08-09 15:06:19 -04002931 sunrpc.min_resvport=
2932 sunrpc.max_resvport=
2933 [NFS,SUNRPC]
2934 SunRPC servers often require that client requests
2935 originate from a privileged port (i.e. a port in the
2936 range 0 < portnr < 1024).
2937 An administrator who wishes to reserve some of these
2938 ports for other uses may adjust the range that the
2939 kernel's sunrpc client considers to be privileged
2940 using these two parameters to set the minimum and
2941 maximum port values.
2942
Greg Banks42a7fc42007-03-06 01:42:23 -08002943 sunrpc.pool_mode=
2944 [NFS]
2945 Control how the NFS server code allocates CPUs to
2946 service thread pools. Depending on how many NICs
2947 you have and where their interrupts are bound, this
2948 option will affect which CPUs will do NFS serving.
2949 Note: this parameter cannot be changed while the
2950 NFS server is running.
2951
2952 auto the server chooses an appropriate mode
2953 automatically using heuristics
2954 global a single global pool contains all CPUs
2955 percpu one pool for each CPU
2956 pernode one pool for each NUMA node (equivalent
2957 to global on non-NUMA machines)
2958
Trond Myklebustcbf11072009-08-09 15:06:19 -04002959 sunrpc.tcp_slot_table_entries=
2960 sunrpc.udp_slot_table_entries=
2961 [NFS,SUNRPC]
2962 Sets the upper limit on the number of simultaneous
2963 RPC calls that can be sent from the client to a
2964 server. Increasing these values may allow you to
2965 improve throughput, but will also increase the
2966 amount of memory reserved for use by the client.
2967
Michal Hockoa42c3902010-11-24 12:57:08 -08002968 swapaccount[=0|1]
2969 [KNL] Enable accounting of swap in memory resource
2970 controller if no parameter or 1 is given or disable
2971 it if 0 is given (See Documentation/cgroups/memory.txt)
2972
Linus Torvalds1da177e2005-04-16 15:20:36 -07002973 swiotlb= [IA-64] Number of I/O TLB slabs
Randy Dunlapa9913042005-10-23 12:57:11 -07002974
Linus Torvalds1da177e2005-04-16 15:20:36 -07002975 switches= [HW,M68k]
2976
Andi Kleene52eec12010-09-08 16:54:17 +02002977 sysfs.deprecated=0|1 [KNL]
2978 Enable/disable old style sysfs layout for old udev
2979 on older distributions. When this option is enabled
2980 very new udev will not work anymore. When this option
2981 is disabled (or CONFIG_SYSFS_DEPRECATED not compiled)
2982 in older udev will not work anymore.
2983 Default depends on CONFIG_SYSFS_DEPRECATED_V2 set in
2984 the kernel configuration.
2985
Ingo Molnar5d6f6472006-12-13 00:34:36 -08002986 sysrq_always_enabled
2987 [KNL]
2988 Ignore sysrq setting - this boot parameter will
2989 neutralize any effect of /proc/sys/kernel/sysrq.
2990 Useful for debugging.
2991
Linus Torvalds1da177e2005-04-16 15:20:36 -07002992 tdfx= [HW,DRM]
2993
David Brownell77437fd2008-07-23 21:28:33 -07002994 test_suspend= [SUSPEND]
2995 Specify "mem" (for Suspend-to-RAM) or "standby" (for
2996 standby suspend) as the system sleep state to briefly
2997 enter during system startup. The system is woken from
2998 this state using a wakeup-capable RTC alarm.
2999
Linus Torvalds1da177e2005-04-16 15:20:36 -07003000 thash_entries= [KNL,NET]
3001 Set number of hash buckets for TCP connection
3002
Len Brownf8707ec2007-08-12 00:12:54 -04003003 thermal.act= [HW,ACPI]
3004 -1: disable all active trip points in all thermal zones
3005 <degrees C>: override all lowest active trip points
3006
Len Brownc52a7412007-08-14 15:49:32 -04003007 thermal.crt= [HW,ACPI]
3008 -1: disable all critical trip points in all thermal zones
Zhang Rui22a94d72008-10-17 02:41:20 -04003009 <degrees C>: override all critical trip points
Len Brownc52a7412007-08-14 15:49:32 -04003010
Len Brownf5487142007-08-12 00:12:44 -04003011 thermal.nocrt= [HW,ACPI]
3012 Set to disable actions on ACPI thermal zone
3013 critical and hot trip points.
3014
Len Brown72b33ef2007-08-12 00:12:17 -04003015 thermal.off= [HW,ACPI]
3016 1: disable ACPI thermal control
3017
Len Browna70cdc52007-08-12 00:12:35 -04003018 thermal.psv= [HW,ACPI]
3019 -1: disable all passive trip points
Randy Dunlapada9cfd2008-12-19 10:57:32 -08003020 <degrees C>: override all passive trip points to this
3021 value
Len Browna70cdc52007-08-12 00:12:35 -04003022
Len Brown730ff342007-08-12 00:12:26 -04003023 thermal.tzp= [HW,ACPI]
3024 Specify global default ACPI thermal zone polling rate
3025 <deci-seconds>: poll all this frequency
3026 0: no polling (default)
3027
Thomas Gleixner8d32a302011-02-23 23:52:23 +00003028 threadirqs [KNL]
3029 Force threading of all interrupt handlers except those
Masanari Iida24775d62012-02-15 00:26:42 +09003030 marked explicitly IRQF_NO_THREAD.
Thomas Gleixner8d32a302011-02-23 23:52:23 +00003031
Konrad Rzeszutek Wilk2ca62b02013-05-08 17:12:44 -04003032 tmem [KNL,XEN]
3033 Enable the Transcendent memory driver if built-in.
3034
3035 tmem.cleancache=0|1 [KNL, XEN]
3036 Default is on (1). Disable the usage of the cleancache
3037 API to send anonymous pages to the hypervisor.
3038
3039 tmem.frontswap=0|1 [KNL, XEN]
3040 Default is on (1). Disable the usage of the frontswap
Konrad Rzeszutek Wilk37d46e12013-05-14 13:56:42 -04003041 API to send swap pages to the hypervisor. If disabled
3042 the selfballooning and selfshrinking are force disabled.
Konrad Rzeszutek Wilk2ca62b02013-05-08 17:12:44 -04003043
3044 tmem.selfballooning=0|1 [KNL, XEN]
3045 Default is on (1). Disable the driving of swap pages
3046 to the hypervisor.
3047
3048 tmem.selfshrinking=0|1 [KNL, XEN]
3049 Default is on (1). Partial swapoff that immediately
3050 transfers pages from Xen hypervisor back to the
3051 kernel based on different criteria.
3052
Heiko Carstens2b1a61f2008-12-25 13:39:23 +01003053 topology= [S390]
3054 Format: {off | on}
3055 Specify if the kernel should make use of the cpu
Sylvestre Ledruf65e51d2011-04-04 15:04:46 -07003056 topology information if the hardware supports this.
3057 The scheduler will make use of this information and
Heiko Carstens2b1a61f2008-12-25 13:39:23 +01003058 e.g. base its process migration decisions on it.
Heiko Carstensc9af3fa2010-10-25 16:10:43 +02003059 Default is on.
Heiko Carstens2b1a61f2008-12-25 13:39:23 +01003060
Linus Torvalds1da177e2005-04-16 15:20:36 -07003061 tp720= [HW,PS2]
3062
Rajiv Andrade225a9be2010-03-25 00:55:32 -03003063 tpm_suspend_pcr=[HW,TPM]
3064 Format: integer pcr id
3065 Specify that at suspend time, the tpm driver
3066 should extend the specified pcr with zeros,
3067 as a workaround for some chips which fail to
3068 flush the last written pcr on TPM_SaveState.
3069 This will guarantee that all the other pcrs
3070 are saved.
3071
Li Zefan9d612be2009-06-24 17:33:15 +08003072 trace_buf_size=nn[KMG]
3073 [FTRACE] will set tracing buffer size.
KOSAKI Motohiro631595f2009-03-10 13:57:10 +09003074
Li Zefan020e5f82009-07-01 10:47:05 +08003075 trace_event=[event-list]
3076 [FTRACE] Set and start specified trace events in order
3077 to facilitate early boot debugging.
3078 See also Documentation/trace/events.txt
3079
Steven Rostedt7bcfaf52012-11-01 22:56:07 -04003080 trace_options=[option-list]
3081 [FTRACE] Enable or disable tracer options at boot.
3082 The option-list is a comma delimited list of options
3083 that can be enabled or disabled just as if you were
3084 to echo the option name into
3085
3086 /sys/kernel/debug/tracing/trace_options
3087
3088 For example, to enable stacktrace option (to dump the
3089 stack trace of each event), add to the command line:
3090
3091 trace_options=stacktrace
3092
3093 See also Documentation/trace/ftrace.txt "trace options"
3094 section.
3095
Steven Rostedt (Red Hat)de7edd32013-06-14 16:21:43 -04003096 traceoff_on_warning
3097 [FTRACE] enable this option to disable tracing when a
3098 warning is hit. This turns off "tracing_on". Tracing can
3099 be enabled again by echoing '1' into the "tracing_on"
3100 file located in /sys/kernel/debug/tracing/
3101
3102 This option is useful, as it disables the trace before
3103 the WARNING dump is called, which prevents the trace to
3104 be filled with content caused by the warning output.
3105
3106 This option can also be set at run time via the sysctl
3107 option: kernel/traceoff_on_warning
3108
Jiri Kosinafcf4d822012-03-21 16:34:02 -07003109 transparent_hugepage=
3110 [KNL]
3111 Format: [always|madvise|never]
3112 Can be used to control the default behavior of the system
3113 with respect to transparent hugepages.
3114 See Documentation/vm/transhuge.txt for more details.
3115
john stultzd3b8f882009-08-17 16:40:47 -07003116 tsc= Disable clocksource stability checks for TSC.
Alok Kataria395628e2008-10-24 17:22:01 -07003117 Format: <string>
3118 [x86] reliable: mark tsc clocksource as reliable, this
john stultzd3b8f882009-08-17 16:40:47 -07003119 disables clocksource verification at runtime, as well
3120 as the stability checks done at bootup. Used to enable
3121 high-resolution timer mode on older hardware, and in
3122 virtualized environment.
Venkatesh Pallipadie82b8e42010-10-04 17:03:20 -07003123 [x86] noirqtime: Do not use TSC to do irq accounting.
3124 Used to run time disable IRQ_TIME_ACCOUNTING on any
3125 platforms where RDTSC is slow and this accounting
3126 can add overhead.
Alok Kataria395628e2008-10-24 17:22:01 -07003127
Randy Dunlapa9913042005-10-23 12:57:11 -07003128 turbografx.map[2|3]= [HW,JOY]
3129 TurboGraFX parallel port interface
3130 Format:
3131 <port#>,<js1>,<js2>,<js3>,<js4>,<js5>,<js6>,<js7>
Linus Torvalds1da177e2005-04-16 15:20:36 -07003132 See also Documentation/input/joystick-parport.txt
3133
Christian Kujaub6935f82011-05-31 15:22:05 +00003134 udbg-immortal [PPC] When debugging early kernel crashes that
3135 happen after console_init() and before a proper
3136 console driver takes over, this boot options might
3137 help "seeing" what's going on.
3138
Eric Dumazetf86dcc52009-10-07 00:37:59 +00003139 uhash_entries= [KNL,NET]
3140 Set number of hash buckets for UDP/UDP-Lite connections
3141
Alan Stern5f8364b2006-12-05 16:29:55 -05003142 uhci-hcd.ignore_oc=
3143 [USB] Ignore overcurrent events (default N).
3144 Some badly-designed motherboards generate lots of
3145 bogus events, for ports that aren't wired to
3146 anything. Set this parameter to avoid log spamming.
3147 Note that genuine overcurrent events won't be
3148 reported either.
3149
Simon Arlotte3a61b02008-07-19 23:32:54 +01003150 unknown_nmi_panic
Randy Dunlap44a4dcf2011-04-04 15:02:24 -07003151 [X86] Cause panic on unknown NMI.
Simon Arlotte3a61b02008-07-19 23:32:54 +01003152
Carl-Daniel Hailfingerc4fc2342011-05-31 21:31:08 +02003153 usbcore.authorized_default=
3154 [USB] Default USB device authorization:
3155 (default -1 = authorized except for wireless USB,
3156 0 = not authorized, 1 = authorized)
3157
Alan Sternb5e795f2007-02-20 15:00:53 -05003158 usbcore.autosuspend=
3159 [USB] The autosuspend time delay (in seconds) used
3160 for newly-detected USB devices (default 2). This
3161 is the time required before an idle device will be
3162 autosuspended. Devices for which the delay is set
Alan Sterneaafbc32007-03-13 16:39:15 -04003163 to a negative value won't be autosuspended at all.
Alan Sternb5e795f2007-02-20 15:00:53 -05003164
Jaroslav Kyselafd7c5192008-10-10 16:24:45 +02003165 usbcore.usbfs_snoop=
3166 [USB] Set to log all usbfs traffic (default 0 = off).
3167
3168 usbcore.blinkenlights=
3169 [USB] Set to cycle leds on hubs (default 0 = off).
3170
3171 usbcore.old_scheme_first=
3172 [USB] Start with the old device initialization
3173 scheme (default 0 = off).
3174
Alan Stern3f5eb8d2011-11-17 16:41:35 -05003175 usbcore.usbfs_memory_mb=
3176 [USB] Memory limit (in MB) for buffers allocated by
3177 usbfs (default = 16, 0 = max = 2047).
3178
Jaroslav Kyselafd7c5192008-10-10 16:24:45 +02003179 usbcore.use_both_schemes=
3180 [USB] Try the other device initialization scheme
3181 if the first one fails (default 1 = enabled).
3182
3183 usbcore.initial_descriptor_timeout=
3184 [USB] Specifies timeout for the initial 64-byte
3185 USB_REQ_GET_DESCRIPTOR request in milliseconds
3186 (default 5000 = 5.0 seconds).
3187
Linus Torvalds1da177e2005-04-16 15:20:36 -07003188 usbhid.mousepoll=
3189 [USBHID] The interval which mice are to be polled at.
Randy Dunlapa9913042005-10-23 12:57:11 -07003190
Alan Sternd4f373e2008-11-10 14:07:45 -05003191 usb-storage.delay_use=
3192 [UMS] The delay in seconds before a new device is
3193 scanned for Logical Units (default 5).
3194
3195 usb-storage.quirks=
3196 [UMS] A list of quirks entries to supplement or
3197 override the built-in unusual_devs list. List
3198 entries are separated by commas. Each entry has
3199 the form VID:PID:Flags where VID and PID are Vendor
3200 and Product ID values (4-digit hex numbers) and
3201 Flags is a set of characters, each corresponding
3202 to a common usb-storage quirk flag as follows:
Alan Sternc838ea42008-12-15 10:40:06 -05003203 a = SANE_SENSE (collect more than 18 bytes
3204 of sense data);
Alan Sterna0bb1082009-12-07 16:39:16 -05003205 b = BAD_SENSE (don't collect more than 18
3206 bytes of sense data);
Alan Sternd4f373e2008-11-10 14:07:45 -05003207 c = FIX_CAPACITY (decrease the reported
3208 device capacity by one sector);
Karl Relton51169012011-05-18 21:42:34 +01003209 d = NO_READ_DISC_INFO (don't use
3210 READ_DISC_INFO command);
3211 e = NO_READ_CAPACITY_16 (don't use
3212 READ_CAPACITY_16 command);
Alan Sternc838ea42008-12-15 10:40:06 -05003213 h = CAPACITY_HEURISTICS (decrease the
3214 reported device capacity by one
3215 sector if the number is odd);
Alan Sternd4f373e2008-11-10 14:07:45 -05003216 i = IGNORE_DEVICE (don't bind to this
3217 device);
3218 l = NOT_LOCKABLE (don't try to lock and
3219 unlock ejectable media);
3220 m = MAX_SECTORS_64 (don't transfer more
3221 than 64 sectors = 32 KB at a time);
Alan Stern21c13a42011-06-07 11:35:52 -04003222 n = INITIAL_READ10 (force a retry of the
3223 initial READ(10) command);
Alan Sternc838ea42008-12-15 10:40:06 -05003224 o = CAPACITY_OK (accept the capacity
3225 reported by the device);
Namjae Jeoneaa05df2012-07-07 23:05:28 -04003226 p = WRITE_CACHE (the device cache is ON
3227 by default);
Alan Sternd4f373e2008-11-10 14:07:45 -05003228 r = IGNORE_RESIDUE (the device reports
3229 bogus residue values);
3230 s = SINGLE_LUN (the device has only one
3231 Logical Unit);
3232 w = NO_WP_DETECT (don't test whether the
3233 medium is write-protected).
3234 Example: quirks=0419:aaf5:rl,0421:0433:rc
3235
Stephen Boydac1667d2011-08-13 12:34:50 -07003236 user_debug= [KNL,ARM]
3237 Format: <int>
3238 See arch/arm/Kconfig.debug help text.
3239 1 - undefined instruction events
3240 2 - system calls
3241 4 - invalid data aborts
3242 8 - SIGSEGV faults
3243 16 - SIGBUS faults
3244 Example: user_debug=31
3245
Ian Campbell14315592010-02-17 10:38:10 +00003246 userpte=
3247 [X86] Flags controlling user PTE allocations.
3248
3249 nohigh = do not allocate PTE pages in
3250 HIGHMEM regardless of setting
3251 of CONFIG_HIGHPTE.
3252
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +05303253 vdso= [X86,SH]
Jeremy Fitzhardinge1dbf527c2007-05-02 19:27:12 +02003254 vdso=2: enable compat VDSO (default with COMPAT_VDSO)
Ingo Molnare6e54942006-06-27 02:53:50 -07003255 vdso=1: enable VDSO (default)
3256 vdso=0: disable VDSO mapping
3257
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +05303258 vdso32= [X86]
Roland McGrathaf65d642008-01-30 13:30:43 +01003259 vdso32=2: enable compat VDSO (default with COMPAT_VDSO)
3260 vdso32=1: enable 32-bit VDSO (default)
3261 vdso32=0: disable 32-bit VDSO mapping
3262
Yasuaki Ishimatsud080d392007-07-17 21:22:55 +09003263 vector= [IA-64,SMP]
3264 vector=percpu: enable percpu vector domain
3265
Linus Torvalds1da177e2005-04-16 15:20:36 -07003266 video= [FB] Frame buffer configuration
3267 See Documentation/fb/modedb.txt.
3268
Aaron Lu3afe6da2013-06-20 15:08:55 +08003269 video.brightness_switch_enabled= [0,1]
3270 If set to 1, on receiving an ACPI notify event
3271 generated by hotkey, video driver will adjust brightness
3272 level and then send out the event to user space through
3273 the allocated input device; If set to 0, video driver
3274 will only send out the event without touching backlight
3275 brightness level.
3276 default: 1
3277
Pawel Moll81a054c2012-05-09 18:30:16 +01003278 virtio_mmio.device=
3279 [VMMIO] Memory mapped virtio (platform) device.
3280
3281 <size>@<baseaddr>:<irq>[:<id>]
3282 where:
3283 <size> := size (can use standard suffixes
3284 like K, M and G)
3285 <baseaddr> := physical base address
3286 <irq> := interrupt number (as passed to
3287 request_irq())
3288 <id> := (optional) platform device id
3289 example:
3290 virtio_mmio.device=1K@0x100b0000:48:7
3291
3292 Can be used multiple times for multiple devices.
3293
Alan Coxcd4f0ef2007-07-31 00:37:59 -07003294 vga= [BOOT,X86-32] Select a particular video mode
Kyle McMartin954a8b82009-02-19 16:48:14 -05003295 See Documentation/x86/boot.txt and
Randy Dunlapa9913042005-10-23 12:57:11 -07003296 Documentation/svga.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -07003297 Use vga=ask for menu.
3298 This is actually a boot loader parameter; the value is
3299 passed to the kernel using a special protocol.
3300
Randy Dunlapa9913042005-10-23 12:57:11 -07003301 vmalloc=nn[KMG] [KNL,BOOT] Forces the vmalloc area to have an exact
Linus Torvalds1da177e2005-04-16 15:20:36 -07003302 size of <nn>. This can be used to increase the
3303 minimum size (128MB on x86). It can also be used to
3304 decrease the size and leave more room for directly
3305 mapped kernel RAM.
3306
Peter Oberparleiter585c3042006-06-29 15:08:25 +02003307 vmhalt= [KNL,S390] Perform z/VM CP command after system halt.
3308 Format: <command>
Linus Torvalds1da177e2005-04-16 15:20:36 -07003309
Peter Oberparleiter585c3042006-06-29 15:08:25 +02003310 vmpanic= [KNL,S390] Perform z/VM CP command after kernel panic.
3311 Format: <command>
3312
3313 vmpoff= [KNL,S390] Perform z/VM CP command after power off.
3314 Format: <command>
Randy Dunlapa9913042005-10-23 12:57:11 -07003315
Andy Lutomirski3ae36652011-08-10 11:15:32 -04003316 vsyscall= [X86-64]
3317 Controls the behavior of vsyscalls (i.e. calls to
3318 fixed addresses of 0xffffffffff600x00 from legacy
3319 code). Most statically-linked binaries and older
3320 versions of glibc use these calls. Because these
3321 functions are at fixed addresses, they make nice
3322 targets for exploits that can control RIP.
3323
Andy Lutomirski2e57ae02011-11-07 16:33:41 -08003324 emulate [default] Vsyscalls turn into traps and are
3325 emulated reasonably safely.
Andy Lutomirski3ae36652011-08-10 11:15:32 -04003326
Andy Lutomirski2e57ae02011-11-07 16:33:41 -08003327 native Vsyscalls are native syscall instructions.
Andy Lutomirski3ae36652011-08-10 11:15:32 -04003328 This is a little bit faster than trapping
3329 and makes a few dynamic recompilers work
3330 better than they would in emulation mode.
3331 It also makes exploits much easier to write.
3332
3333 none Vsyscalls don't work at all. This makes
3334 them quite hard to use for exploits but
3335 might break your system.
3336
Clemens Ladisch9ea9a882009-12-15 16:45:39 -08003337 vt.cur_default= [VT] Default cursor shape.
3338 Format: 0xCCBBAA, where AA, BB, and CC are the same as
3339 the parameters of the <Esc>[?A;B;Cc escape sequence;
3340 see VGA-softcursor.txt. Default: 2 = underline.
3341
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07003342 vt.default_blu= [VT]
3343 Format: <blue0>,<blue1>,<blue2>,...,<blue15>
3344 Change the default blue palette of the console.
3345 This is a 16-member array composed of values
3346 ranging from 0-255.
3347
3348 vt.default_grn= [VT]
3349 Format: <green0>,<green1>,<green2>,...,<green15>
3350 Change the default green palette of the console.
3351 This is a 16-member array composed of values
3352 ranging from 0-255.
3353
3354 vt.default_red= [VT]
3355 Format: <red0>,<red1>,<red2>,...,<red15>
3356 Change the default red palette of the console.
3357 This is a 16-member array composed of values
3358 ranging from 0-255.
3359
3360 vt.default_utf8=
3361 [VT]
3362 Format=<0|1>
3363 Set system-wide default UTF-8 mode for all tty's.
3364 Default is 1, i.e. UTF-8 mode is enabled for all
3365 newly opened terminals.
3366
Matthew Garrettf6c06b62009-11-13 15:14:11 -05003367 vt.global_cursor_default=
3368 [VT]
3369 Format=<-1|0|1>
3370 Set system-wide default for whether a cursor
3371 is shown on new VTs. Default is -1,
3372 i.e. cursors will be created by default unless
3373 overridden by individual drivers. 0 will hide
3374 cursors, 1 will display them.
3375
Randy Dunlap4724ba572010-05-03 11:42:52 -07003376 watchdog timers [HW,WDT] For information on watchdog timers,
3377 see Documentation/watchdog/watchdog-parameters.txt
3378 or other driver-specific files in the
3379 Documentation/watchdog/ directory.
Linus Torvalds1da177e2005-04-16 15:20:36 -07003380
Tejun Heod55262c2013-04-01 11:23:38 -07003381 workqueue.disable_numa
3382 By default, all work items queued to unbound
3383 workqueues are affine to the NUMA nodes they're
3384 issued on, which results in better behavior in
3385 general. If NUMA affinity needs to be disabled for
3386 whatever reason, this option can be used. Note
3387 that this also can be controlled per-workqueue for
3388 workqueues visible under /sys/bus/workqueue/.
3389
Viresh Kumarcee22a12013-04-08 16:45:40 +05303390 workqueue.power_efficient
3391 Per-cpu workqueues are generally preferred because
3392 they show better performance thanks to cache
3393 locality; unfortunately, per-cpu workqueues tend to
3394 be more power hungry than unbound workqueues.
3395
3396 Enabling this makes the per-cpu workqueues which
3397 were observed to contribute significantly to power
3398 consumption unbound, leading to measurably lower
3399 power usage at the cost of small performance
3400 overhead.
3401
3402 The default value of this parameter is determined by
3403 the config option CONFIG_WQ_POWER_EFFICIENT_DEFAULT.
3404
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07003405 x2apic_phys [X86-64,APIC] Use x2apic physical mode instead of
3406 default x2apic cluster mode on platforms
3407 supporting x2apic.
3408
Jacob Panbb24c472009-09-02 07:37:17 -07003409 x86_mrst_timer= [X86-32,APBT]
3410 Choose timer option for x86 Moorestown MID platform.
3411 Two valid options are apbt timer only and lapic timer
3412 plus one apbt timer for broadcast timer.
3413 x86_mrst_timer=apbt_only | lapic_and_apbt
3414
Stefano Stabellinic1c54132010-05-14 12:44:30 +01003415 xen_emul_unplug= [HW,X86,XEN]
3416 Unplug Xen emulated devices
3417 Format: [unplug0,][unplug1]
3418 ide-disks -- unplug primary master IDE devices
3419 aux-ide-disks -- unplug non-primary-master IDE devices
3420 nics -- unplug network devices
3421 all -- unplug all emulated devices (NICs and IDE disks)
Ian Campbell1dc7ce92010-08-23 11:59:29 +01003422 unnecessary -- unplugging emulated devices is
3423 unnecessary even if the host did not respond to
3424 the unplug protocol
Ian Campbellc93a4df2010-08-23 11:59:28 +01003425 never -- do not unplug even if version check succeeds
Stefano Stabellinic1c54132010-05-14 12:44:30 +01003426
Linus Torvalds1da177e2005-04-16 15:20:36 -07003427 xirc2ps_cs= [NET,PCMCIA]
Randy Dunlapa9913042005-10-23 12:57:11 -07003428 Format:
3429 <irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]
Linus Torvalds1da177e2005-04-16 15:20:36 -07003430
Randy Dunlapa9913042005-10-23 12:57:11 -07003431______________________________________________________________________
Linus Torvalds1da177e2005-04-16 15:20:36 -07003432
3433TODO:
3434
Linus Torvalds1da177e2005-04-16 15:20:36 -07003435 Add more DRM drivers.