blob: dfe262c726fb8292d7861ea23715a4e6f968134e [file] [log] [blame]
Leo (Hao) Chen266dead2009-10-09 19:13:08 -07001/*****************************************************************************
2* Copyright 2004 - 2009 Broadcom Corporation. All rights reserved.
3*
4* Unless you and Broadcom execute a separate written software license
5* agreement governing use of this software, this software is licensed to you
6* under the terms of the GNU General Public License version 2, available at
7* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
8*
9* Notwithstanding the above, under no circumstances may you combine this
10* software in any way with any other Broadcom software provided under a
11* license other than the GPL, without Broadcom's express prior written
12* consent.
13*****************************************************************************/
14
15/* ---- Include Files ---------------------------------------------------- */
Leo (Hao) Chen266dead2009-10-09 19:13:08 -070016#include <linux/module.h>
17#include <linux/types.h>
18#include <linux/init.h>
19#include <linux/kernel.h>
Tejun Heo5a0e3ad2010-03-24 17:04:11 +090020#include <linux/slab.h>
Leo (Hao) Chen266dead2009-10-09 19:13:08 -070021#include <linux/string.h>
22#include <linux/ioport.h>
23#include <linux/device.h>
24#include <linux/delay.h>
25#include <linux/err.h>
26#include <linux/io.h>
27#include <linux/platform_device.h>
28#include <linux/mtd/mtd.h>
29#include <linux/mtd/nand.h>
30#include <linux/mtd/nand_ecc.h>
31#include <linux/mtd/partitions.h>
32
33#include <asm/mach-types.h>
34#include <asm/system.h>
35
36#include <mach/reg_nand.h>
37#include <mach/reg_umi.h>
38
39#include "nand_bcm_umi.h"
40
41#include <mach/memory_settings.h>
42
43#define USE_DMA 1
44#include <mach/dma.h>
45#include <linux/dma-mapping.h>
46#include <linux/completion.h>
47
48/* ---- External Variable Declarations ----------------------------------- */
49/* ---- External Function Prototypes ------------------------------------- */
50/* ---- Public Variables ------------------------------------------------- */
51/* ---- Private Constants and Types -------------------------------------- */
52static const __devinitconst char gBanner[] = KERN_INFO \
53 "BCM UMI MTD NAND Driver: 1.00\n";
54
55#ifdef CONFIG_MTD_PARTITIONS
56const char *part_probes[] = { "cmdlinepart", NULL };
57#endif
58
59#if NAND_ECC_BCH
60static uint8_t scan_ff_pattern[] = { 0xff };
61
62static struct nand_bbt_descr largepage_bbt = {
63 .options = 0,
64 .offs = 0,
65 .len = 1,
66 .pattern = scan_ff_pattern
67};
68#endif
69
70/*
71** Preallocate a buffer to avoid having to do this every dma operation.
72** This is the size of the preallocated coherent DMA buffer.
73*/
74#if USE_DMA
75#define DMA_MIN_BUFLEN 512
76#define DMA_MAX_BUFLEN PAGE_SIZE
77#define USE_DIRECT_IO(len) (((len) < DMA_MIN_BUFLEN) || \
78 ((len) > DMA_MAX_BUFLEN))
79
80/*
81 * The current NAND data space goes from 0x80001900 to 0x80001FFF,
82 * which is only 0x700 = 1792 bytes long. This is too small for 2K, 4K page
83 * size NAND flash. Need to break the DMA down to multiple 1Ks.
84 *
85 * Need to make sure REG_NAND_DATA_PADDR + DMA_MAX_LEN < 0x80002000
86 */
87#define DMA_MAX_LEN 1024
88
89#else /* !USE_DMA */
90#define DMA_MIN_BUFLEN 0
91#define DMA_MAX_BUFLEN 0
92#define USE_DIRECT_IO(len) 1
93#endif
94/* ---- Private Function Prototypes -------------------------------------- */
95static void bcm_umi_nand_read_buf(struct mtd_info *mtd, u_char * buf, int len);
96static void bcm_umi_nand_write_buf(struct mtd_info *mtd, const u_char * buf,
97 int len);
98
99/* ---- Private Variables ------------------------------------------------ */
100static struct mtd_info *board_mtd;
101static void __iomem *bcm_umi_io_base;
102static void *virtPtr;
103static dma_addr_t physPtr;
104static struct completion nand_comp;
105
106/* ---- Private Functions ------------------------------------------------ */
107#if NAND_ECC_BCH
108#include "bcm_umi_bch.c"
109#else
110#include "bcm_umi_hamming.c"
111#endif
112
113#if USE_DMA
114
115/* Handler called when the DMA finishes. */
116static void nand_dma_handler(DMA_Device_t dev, int reason, void *userData)
117{
118 complete(&nand_comp);
119}
120
121static int nand_dma_init(void)
122{
123 int rc;
124
125 rc = dma_set_device_handler(DMA_DEVICE_NAND_MEM_TO_MEM,
126 nand_dma_handler, NULL);
127 if (rc != 0) {
128 printk(KERN_ERR "dma_set_device_handler failed: %d\n", rc);
129 return rc;
130 }
131
132 virtPtr =
133 dma_alloc_coherent(NULL, DMA_MAX_BUFLEN, &physPtr, GFP_KERNEL);
134 if (virtPtr == NULL) {
135 printk(KERN_ERR "NAND - Failed to allocate memory for DMA buffer\n");
136 return -ENOMEM;
137 }
138
139 return 0;
140}
141
142static void nand_dma_term(void)
143{
144 if (virtPtr != NULL)
145 dma_free_coherent(NULL, DMA_MAX_BUFLEN, virtPtr, physPtr);
146}
147
148static void nand_dma_read(void *buf, int len)
149{
150 int offset = 0;
151 int tmp_len = 0;
152 int len_left = len;
153 DMA_Handle_t hndl;
154
155 if (virtPtr == NULL)
156 panic("nand_dma_read: virtPtr == NULL\n");
157
158 if ((void *)physPtr == NULL)
159 panic("nand_dma_read: physPtr == NULL\n");
160
161 hndl = dma_request_channel(DMA_DEVICE_NAND_MEM_TO_MEM);
162 if (hndl < 0) {
163 printk(KERN_ERR
164 "nand_dma_read: unable to allocate dma channel: %d\n",
165 (int)hndl);
166 panic("\n");
167 }
168
169 while (len_left > 0) {
170 if (len_left > DMA_MAX_LEN) {
171 tmp_len = DMA_MAX_LEN;
172 len_left -= DMA_MAX_LEN;
173 } else {
174 tmp_len = len_left;
175 len_left = 0;
176 }
177
178 init_completion(&nand_comp);
179 dma_transfer_mem_to_mem(hndl, REG_NAND_DATA_PADDR,
180 physPtr + offset, tmp_len);
181 wait_for_completion(&nand_comp);
182
183 offset += tmp_len;
184 }
185
186 dma_free_channel(hndl);
187
188 if (buf != NULL)
189 memcpy(buf, virtPtr, len);
190}
191
192static void nand_dma_write(const void *buf, int len)
193{
194 int offset = 0;
195 int tmp_len = 0;
196 int len_left = len;
197 DMA_Handle_t hndl;
198
199 if (buf == NULL)
200 panic("nand_dma_write: buf == NULL\n");
201
202 if (virtPtr == NULL)
203 panic("nand_dma_write: virtPtr == NULL\n");
204
205 if ((void *)physPtr == NULL)
206 panic("nand_dma_write: physPtr == NULL\n");
207
208 memcpy(virtPtr, buf, len);
209
210
211 hndl = dma_request_channel(DMA_DEVICE_NAND_MEM_TO_MEM);
212 if (hndl < 0) {
213 printk(KERN_ERR
214 "nand_dma_write: unable to allocate dma channel: %d\n",
215 (int)hndl);
216 panic("\n");
217 }
218
219 while (len_left > 0) {
220 if (len_left > DMA_MAX_LEN) {
221 tmp_len = DMA_MAX_LEN;
222 len_left -= DMA_MAX_LEN;
223 } else {
224 tmp_len = len_left;
225 len_left = 0;
226 }
227
228 init_completion(&nand_comp);
229 dma_transfer_mem_to_mem(hndl, physPtr + offset,
230 REG_NAND_DATA_PADDR, tmp_len);
231 wait_for_completion(&nand_comp);
232
233 offset += tmp_len;
234 }
235
236 dma_free_channel(hndl);
237}
238
239#endif
240
241static int nand_dev_ready(struct mtd_info *mtd)
242{
243 return nand_bcm_umi_dev_ready();
244}
245
246/****************************************************************************
247*
248* bcm_umi_nand_inithw
249*
250* This routine does the necessary hardware (board-specific)
251* initializations. This includes setting up the timings, etc.
252*
253***************************************************************************/
254int bcm_umi_nand_inithw(void)
255{
256 /* Configure nand timing parameters */
257 REG_UMI_NAND_TCR &= ~0x7ffff;
258 REG_UMI_NAND_TCR |= HW_CFG_NAND_TCR;
259
260#if !defined(CONFIG_MTD_NAND_BCM_UMI_HWCS)
261 /* enable software control of CS */
262 REG_UMI_NAND_TCR |= REG_UMI_NAND_TCR_CS_SWCTRL;
263#endif
264
265 /* keep NAND chip select asserted */
266 REG_UMI_NAND_RCSR |= REG_UMI_NAND_RCSR_CS_ASSERTED;
267
268 REG_UMI_NAND_TCR &= ~REG_UMI_NAND_TCR_WORD16;
269 /* enable writes to flash */
270 REG_UMI_MMD_ICR |= REG_UMI_MMD_ICR_FLASH_WP;
271
272 writel(NAND_CMD_RESET, bcm_umi_io_base + REG_NAND_CMD_OFFSET);
273 nand_bcm_umi_wait_till_ready();
274
275#if NAND_ECC_BCH
276 nand_bcm_umi_bch_config_ecc(NAND_ECC_NUM_BYTES);
277#endif
278
279 return 0;
280}
281
282/* Used to turn latch the proper register for access. */
283static void bcm_umi_nand_hwcontrol(struct mtd_info *mtd, int cmd,
284 unsigned int ctrl)
285{
286 /* send command to hardware */
287 struct nand_chip *chip = mtd->priv;
288 if (ctrl & NAND_CTRL_CHANGE) {
289 if (ctrl & NAND_CLE) {
290 chip->IO_ADDR_W = bcm_umi_io_base + REG_NAND_CMD_OFFSET;
291 goto CMD;
292 }
293 if (ctrl & NAND_ALE) {
294 chip->IO_ADDR_W =
295 bcm_umi_io_base + REG_NAND_ADDR_OFFSET;
296 goto CMD;
297 }
298 chip->IO_ADDR_W = bcm_umi_io_base + REG_NAND_DATA8_OFFSET;
299 }
300
301CMD:
302 /* Send command to chip directly */
303 if (cmd != NAND_CMD_NONE)
304 writeb(cmd, chip->IO_ADDR_W);
305}
306
307static void bcm_umi_nand_write_buf(struct mtd_info *mtd, const u_char * buf,
308 int len)
309{
310 if (USE_DIRECT_IO(len)) {
311 /* Do it the old way if the buffer is small or too large.
312 * Probably quicker than starting and checking dma. */
313 int i;
314 struct nand_chip *this = mtd->priv;
315
316 for (i = 0; i < len; i++)
317 writeb(buf[i], this->IO_ADDR_W);
318 }
319#if USE_DMA
320 else
321 nand_dma_write(buf, len);
322#endif
323}
324
325static void bcm_umi_nand_read_buf(struct mtd_info *mtd, u_char * buf, int len)
326{
327 if (USE_DIRECT_IO(len)) {
328 int i;
329 struct nand_chip *this = mtd->priv;
330
331 for (i = 0; i < len; i++)
332 buf[i] = readb(this->IO_ADDR_R);
333 }
334#if USE_DMA
335 else
336 nand_dma_read(buf, len);
337#endif
338}
339
340static uint8_t readbackbuf[NAND_MAX_PAGESIZE];
341static int bcm_umi_nand_verify_buf(struct mtd_info *mtd, const u_char * buf,
342 int len)
343{
344 /*
345 * Try to readback page with ECC correction. This is necessary
346 * for MLC parts which may have permanently stuck bits.
347 */
348 struct nand_chip *chip = mtd->priv;
349 int ret = chip->ecc.read_page(mtd, chip, readbackbuf, 0);
350 if (ret < 0)
351 return -EFAULT;
352 else {
353 if (memcmp(readbackbuf, buf, len) == 0)
354 return 0;
355
356 return -EFAULT;
357 }
358 return 0;
359}
360
361static int __devinit bcm_umi_nand_probe(struct platform_device *pdev)
362{
363 struct nand_chip *this;
364 struct resource *r;
365 int err = 0;
366
367 printk(gBanner);
368
369 /* Allocate memory for MTD device structure and private data */
370 board_mtd =
371 kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip),
372 GFP_KERNEL);
373 if (!board_mtd) {
374 printk(KERN_WARNING
375 "Unable to allocate NAND MTD device structure.\n");
376 return -ENOMEM;
377 }
378
379 r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
380
381 if (!r)
382 return -ENXIO;
383
Daniel Mack3ad2f3f2010-02-03 08:01:28 +0800384 /* map physical address */
Leo (Hao) Chen266dead2009-10-09 19:13:08 -0700385 bcm_umi_io_base = ioremap(r->start, r->end - r->start + 1);
386
387 if (!bcm_umi_io_base) {
388 printk(KERN_ERR "ioremap to access BCM UMI NAND chip failed\n");
389 kfree(board_mtd);
390 return -EIO;
391 }
392
393 /* Get pointer to private data */
394 this = (struct nand_chip *)(&board_mtd[1]);
395
396 /* Initialize structures */
397 memset((char *)board_mtd, 0, sizeof(struct mtd_info));
398 memset((char *)this, 0, sizeof(struct nand_chip));
399
400 /* Link the private data with the MTD structure */
401 board_mtd->priv = this;
402
403 /* Initialize the NAND hardware. */
404 if (bcm_umi_nand_inithw() < 0) {
405 printk(KERN_ERR "BCM UMI NAND chip could not be initialized\n");
406 iounmap(bcm_umi_io_base);
407 kfree(board_mtd);
408 return -EIO;
409 }
410
411 /* Set address of NAND IO lines */
412 this->IO_ADDR_W = bcm_umi_io_base + REG_NAND_DATA8_OFFSET;
413 this->IO_ADDR_R = bcm_umi_io_base + REG_NAND_DATA8_OFFSET;
414
415 /* Set command delay time, see datasheet for correct value */
416 this->chip_delay = 0;
417 /* Assign the device ready function, if available */
418 this->dev_ready = nand_dev_ready;
419 this->options = 0;
420
421 this->write_buf = bcm_umi_nand_write_buf;
422 this->read_buf = bcm_umi_nand_read_buf;
423 this->verify_buf = bcm_umi_nand_verify_buf;
424
425 this->cmd_ctrl = bcm_umi_nand_hwcontrol;
426 this->ecc.mode = NAND_ECC_HW;
427 this->ecc.size = 512;
428 this->ecc.bytes = NAND_ECC_NUM_BYTES;
429#if NAND_ECC_BCH
430 this->ecc.read_page = bcm_umi_bch_read_page_hwecc;
431 this->ecc.write_page = bcm_umi_bch_write_page_hwecc;
432#else
433 this->ecc.correct = nand_correct_data512;
434 this->ecc.calculate = bcm_umi_hamming_get_hw_ecc;
435 this->ecc.hwctl = bcm_umi_hamming_enable_hwecc;
436#endif
437
438#if USE_DMA
439 err = nand_dma_init();
440 if (err != 0)
441 return err;
442#endif
443
444 /* Figure out the size of the device that we have.
445 * We need to do this to figure out which ECC
446 * layout we'll be using.
447 */
448
David Woodhouse5e81e882010-02-26 18:32:56 +0000449 err = nand_scan_ident(board_mtd, 1, NULL);
Leo (Hao) Chen266dead2009-10-09 19:13:08 -0700450 if (err) {
451 printk(KERN_ERR "nand_scan failed: %d\n", err);
452 iounmap(bcm_umi_io_base);
453 kfree(board_mtd);
454 return err;
455 }
456
457 /* Now that we know the nand size, we can setup the ECC layout */
458
459 switch (board_mtd->writesize) { /* writesize is the pagesize */
460 case 4096:
461 this->ecc.layout = &nand_hw_eccoob_4096;
462 break;
463 case 2048:
464 this->ecc.layout = &nand_hw_eccoob_2048;
465 break;
466 case 512:
467 this->ecc.layout = &nand_hw_eccoob_512;
468 break;
469 default:
470 {
471 printk(KERN_ERR "NAND - Unrecognized pagesize: %d\n",
472 board_mtd->writesize);
473 return -EINVAL;
474 }
475 }
476
477#if NAND_ECC_BCH
478 if (board_mtd->writesize > 512) {
479 if (this->options & NAND_USE_FLASH_BBT)
480 largepage_bbt.options = NAND_BBT_SCAN2NDPAGE;
481 this->badblock_pattern = &largepage_bbt;
482 }
483#endif
484
485 /* Now finish off the scan, now that ecc.layout has been initialized. */
486
487 err = nand_scan_tail(board_mtd);
488 if (err) {
489 printk(KERN_ERR "nand_scan failed: %d\n", err);
490 iounmap(bcm_umi_io_base);
491 kfree(board_mtd);
492 return err;
493 }
494
495 /* Register the partitions */
496 {
497 int nr_partitions;
498 struct mtd_partition *partition_info;
499
500 board_mtd->name = "bcm_umi-nand";
501 nr_partitions =
502 parse_mtd_partitions(board_mtd, part_probes,
503 &partition_info, 0);
504
505 if (nr_partitions <= 0) {
506 printk(KERN_ERR "BCM UMI NAND: Too few partitions - %d\n",
507 nr_partitions);
508 iounmap(bcm_umi_io_base);
509 kfree(board_mtd);
510 return -EIO;
511 }
512 add_mtd_partitions(board_mtd, partition_info, nr_partitions);
513 }
514
515 /* Return happy */
516 return 0;
517}
518
519static int bcm_umi_nand_remove(struct platform_device *pdev)
520{
521#if USE_DMA
522 nand_dma_term();
523#endif
524
525 /* Release resources, unregister device */
526 nand_release(board_mtd);
527
Daniel Mack3ad2f3f2010-02-03 08:01:28 +0800528 /* unmap physical address */
Leo (Hao) Chen266dead2009-10-09 19:13:08 -0700529 iounmap(bcm_umi_io_base);
530
531 /* Free the MTD device structure */
532 kfree(board_mtd);
533
534 return 0;
535}
536
537#ifdef CONFIG_PM
538static int bcm_umi_nand_suspend(struct platform_device *pdev,
539 pm_message_t state)
540{
541 printk(KERN_ERR "MTD NAND suspend is being called\n");
542 return 0;
543}
544
545static int bcm_umi_nand_resume(struct platform_device *pdev)
546{
547 printk(KERN_ERR "MTD NAND resume is being called\n");
548 return 0;
549}
550#else
551#define bcm_umi_nand_suspend NULL
552#define bcm_umi_nand_resume NULL
553#endif
554
555static struct platform_driver nand_driver = {
556 .driver = {
557 .name = "bcm-nand",
558 .owner = THIS_MODULE,
559 },
560 .probe = bcm_umi_nand_probe,
561 .remove = bcm_umi_nand_remove,
562 .suspend = bcm_umi_nand_suspend,
563 .resume = bcm_umi_nand_resume,
564};
565
566static int __init nand_init(void)
567{
568 return platform_driver_register(&nand_driver);
569}
570
571static void __exit nand_exit(void)
572{
573 platform_driver_unregister(&nand_driver);
574}
575
576module_init(nand_init);
577module_exit(nand_exit);
578
579MODULE_LICENSE("GPL");
580MODULE_AUTHOR("Broadcom");
581MODULE_DESCRIPTION("BCM UMI MTD NAND driver");