blob: 7da5fa845959ab3dc9c2a393d7336a318c113aeb [file] [log] [blame]
Andy Fleming00db8182005-07-30 19:31:23 -04001/*
2 * include/linux/phy.h
3 *
4 * Framework and drivers for configuring and reading different PHYs
5 * Based on code in sungem_phy.c and gianfar_phy.c
6 *
7 * Author: Andy Fleming
8 *
9 * Copyright (c) 2004 Freescale Semiconductor, Inc.
10 *
11 * This program is free software; you can redistribute it and/or modify it
12 * under the terms of the GNU General Public License as published by the
13 * Free Software Foundation; either version 2 of the License, or (at your
14 * option) any later version.
15 *
16 */
17
18#ifndef __PHY_H
19#define __PHY_H
20
21#include <linux/spinlock.h>
22#include <linux/device.h>
Maciej W. Rozycki13df29f2006-10-03 16:18:28 +010023#include <linux/ethtool.h>
24#include <linux/mii.h>
25#include <linux/timer.h>
26#include <linux/workqueue.h>
David Woodhouse8626d3b2010-04-02 01:05:27 +000027#include <linux/mod_devicetable.h>
Andy Fleming00db8182005-07-30 19:31:23 -040028
Maciej W. Rozycki0ac49522007-09-28 22:42:14 -070029#include <asm/atomic.h>
30
Andy Fleming00db8182005-07-30 19:31:23 -040031#define PHY_BASIC_FEATURES (SUPPORTED_10baseT_Half | \
32 SUPPORTED_10baseT_Full | \
33 SUPPORTED_100baseT_Half | \
34 SUPPORTED_100baseT_Full | \
35 SUPPORTED_Autoneg | \
36 SUPPORTED_TP | \
37 SUPPORTED_MII)
38
39#define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \
40 SUPPORTED_1000baseT_Half | \
41 SUPPORTED_1000baseT_Full)
42
Andy Flemingc5e38a92008-04-09 19:38:27 -050043/*
44 * Set phydev->irq to PHY_POLL if interrupts are not supported,
Andy Fleming00db8182005-07-30 19:31:23 -040045 * or not desired for this PHY. Set to PHY_IGNORE_INTERRUPT if
46 * the attached driver handles the interrupt
47 */
48#define PHY_POLL -1
49#define PHY_IGNORE_INTERRUPT -2
50
51#define PHY_HAS_INTERRUPT 0x00000001
52#define PHY_HAS_MAGICANEG 0x00000002
53
Andy Fleminge8a2b6a2006-12-01 12:01:06 -060054/* Interface Mode definitions */
55typedef enum {
56 PHY_INTERFACE_MODE_MII,
57 PHY_INTERFACE_MODE_GMII,
58 PHY_INTERFACE_MODE_SGMII,
59 PHY_INTERFACE_MODE_TBI,
60 PHY_INTERFACE_MODE_RMII,
61 PHY_INTERFACE_MODE_RGMII,
Kim Phillipsa9995892007-04-13 01:25:57 -050062 PHY_INTERFACE_MODE_RGMII_ID,
Kim Phillips7d400a42007-11-26 16:17:48 -060063 PHY_INTERFACE_MODE_RGMII_RXID,
64 PHY_INTERFACE_MODE_RGMII_TXID,
Andy Fleminge8a2b6a2006-12-01 12:01:06 -060065 PHY_INTERFACE_MODE_RTBI
66} phy_interface_t;
67
Andy Fleming00db8182005-07-30 19:31:23 -040068
Andy Fleminge8a2b6a2006-12-01 12:01:06 -060069#define PHY_INIT_TIMEOUT 100000
Andy Fleming00db8182005-07-30 19:31:23 -040070#define PHY_STATE_TIME 1
71#define PHY_FORCE_TIMEOUT 10
72#define PHY_AN_TIMEOUT 10
73
Andy Fleminge8a2b6a2006-12-01 12:01:06 -060074#define PHY_MAX_ADDR 32
Andy Fleming00db8182005-07-30 19:31:23 -040075
Kumar Galaa4d00f12006-01-11 11:27:33 -080076/* Used when trying to connect to a specific phy (mii bus id:phy device id) */
Andy Fleming9d9326d2008-04-09 19:38:13 -050077#define PHY_ID_FMT "%s:%02x"
78
79/*
80 * Need to be a little smaller than phydev->dev.bus_id to leave room
81 * for the ":%02x"
82 */
David S. Miller8e401ec2009-05-26 21:16:25 -070083#define MII_BUS_ID_SIZE (20 - 3)
Kumar Galaa4d00f12006-01-11 11:27:33 -080084
Jason Gunthorpeabf35df2010-03-09 09:17:42 +000085/* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit
86 IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */
87#define MII_ADDR_C45 (1<<30)
88
Andy Flemingc5e38a92008-04-09 19:38:27 -050089/*
90 * The Bus class for PHYs. Devices which provide access to
91 * PHYs should register using this structure
92 */
Andy Fleming00db8182005-07-30 19:31:23 -040093struct mii_bus {
94 const char *name;
Andy Fleming9d9326d2008-04-09 19:38:13 -050095 char id[MII_BUS_ID_SIZE];
Andy Fleming00db8182005-07-30 19:31:23 -040096 void *priv;
97 int (*read)(struct mii_bus *bus, int phy_id, int regnum);
98 int (*write)(struct mii_bus *bus, int phy_id, int regnum, u16 val);
99 int (*reset)(struct mii_bus *bus);
100
Andy Flemingc5e38a92008-04-09 19:38:27 -0500101 /*
102 * A lock to ensure that only one thing can read/write
103 * the MDIO bus at a time
104 */
Nate Case35b5f6b2008-01-29 10:05:09 -0600105 struct mutex mdio_lock;
Andy Fleming00db8182005-07-30 19:31:23 -0400106
Lennert Buytenhek18ee49d2008-10-01 15:41:33 +0000107 struct device *parent;
Lennert Buytenhek46abc022008-10-08 16:33:40 -0700108 enum {
109 MDIOBUS_ALLOCATED = 1,
110 MDIOBUS_REGISTERED,
111 MDIOBUS_UNREGISTERED,
112 MDIOBUS_RELEASED,
113 } state;
114 struct device dev;
Andy Fleming00db8182005-07-30 19:31:23 -0400115
116 /* list of all PHYs on bus */
117 struct phy_device *phy_map[PHY_MAX_ADDR];
118
Peter Meerwaldc6883992010-09-02 04:06:24 +0000119 /* PHY addresses to be ignored when probing */
Matt Porterf896424c2005-11-02 16:13:06 -0700120 u32 phy_mask;
121
Andy Flemingc5e38a92008-04-09 19:38:27 -0500122 /*
123 * Pointer to an array of interrupts, each PHY's
124 * interrupt at the index matching its address
125 */
Andy Fleming00db8182005-07-30 19:31:23 -0400126 int *irq;
127};
Lennert Buytenhek46abc022008-10-08 16:33:40 -0700128#define to_mii_bus(d) container_of(d, struct mii_bus, dev)
Andy Fleming00db8182005-07-30 19:31:23 -0400129
Lennert Buytenhek2e888102008-09-29 17:12:35 +0000130struct mii_bus *mdiobus_alloc(void);
131int mdiobus_register(struct mii_bus *bus);
132void mdiobus_unregister(struct mii_bus *bus);
133void mdiobus_free(struct mii_bus *bus);
134struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr);
Jason Gunthorpeabf35df2010-03-09 09:17:42 +0000135int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum);
136int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val);
Lennert Buytenhek2e888102008-09-29 17:12:35 +0000137
138
Andy Fleminge8a2b6a2006-12-01 12:01:06 -0600139#define PHY_INTERRUPT_DISABLED 0x0
140#define PHY_INTERRUPT_ENABLED 0x80000000
Andy Fleming00db8182005-07-30 19:31:23 -0400141
142/* PHY state machine states:
143 *
144 * DOWN: PHY device and driver are not ready for anything. probe
145 * should be called if and only if the PHY is in this state,
146 * given that the PHY device exists.
147 * - PHY driver probe function will, depending on the PHY, set
148 * the state to STARTING or READY
149 *
150 * STARTING: PHY device is coming up, and the ethernet driver is
151 * not ready. PHY drivers may set this in the probe function.
152 * If they do, they are responsible for making sure the state is
153 * eventually set to indicate whether the PHY is UP or READY,
154 * depending on the state when the PHY is done starting up.
155 * - PHY driver will set the state to READY
156 * - start will set the state to PENDING
157 *
158 * READY: PHY is ready to send and receive packets, but the
159 * controller is not. By default, PHYs which do not implement
160 * probe will be set to this state by phy_probe(). If the PHY
161 * driver knows the PHY is ready, and the PHY state is STARTING,
162 * then it sets this STATE.
163 * - start will set the state to UP
164 *
165 * PENDING: PHY device is coming up, but the ethernet driver is
166 * ready. phy_start will set this state if the PHY state is
167 * STARTING.
168 * - PHY driver will set the state to UP when the PHY is ready
169 *
170 * UP: The PHY and attached device are ready to do work.
171 * Interrupts should be started here.
172 * - timer moves to AN
173 *
174 * AN: The PHY is currently negotiating the link state. Link is
175 * therefore down for now. phy_timer will set this state when it
176 * detects the state is UP. config_aneg will set this state
177 * whenever called with phydev->autoneg set to AUTONEG_ENABLE.
178 * - If autonegotiation finishes, but there's no link, it sets
179 * the state to NOLINK.
180 * - If aneg finishes with link, it sets the state to RUNNING,
181 * and calls adjust_link
182 * - If autonegotiation did not finish after an arbitrary amount
183 * of time, autonegotiation should be tried again if the PHY
184 * supports "magic" autonegotiation (back to AN)
185 * - If it didn't finish, and no magic_aneg, move to FORCING.
186 *
187 * NOLINK: PHY is up, but not currently plugged in.
188 * - If the timer notes that the link comes back, we move to RUNNING
189 * - config_aneg moves to AN
190 * - phy_stop moves to HALTED
191 *
192 * FORCING: PHY is being configured with forced settings
193 * - if link is up, move to RUNNING
194 * - If link is down, we drop to the next highest setting, and
195 * retry (FORCING) after a timeout
196 * - phy_stop moves to HALTED
197 *
198 * RUNNING: PHY is currently up, running, and possibly sending
199 * and/or receiving packets
200 * - timer will set CHANGELINK if we're polling (this ensures the
201 * link state is polled every other cycle of this state machine,
202 * which makes it every other second)
203 * - irq will set CHANGELINK
204 * - config_aneg will set AN
205 * - phy_stop moves to HALTED
206 *
207 * CHANGELINK: PHY experienced a change in link state
208 * - timer moves to RUNNING if link
209 * - timer moves to NOLINK if the link is down
210 * - phy_stop moves to HALTED
211 *
212 * HALTED: PHY is up, but no polling or interrupts are done. Or
213 * PHY is in an error state.
214 *
215 * - phy_start moves to RESUMING
216 *
217 * RESUMING: PHY was halted, but now wants to run again.
218 * - If we are forcing, or aneg is done, timer moves to RUNNING
219 * - If aneg is not done, timer moves to AN
220 * - phy_stop moves to HALTED
221 */
222enum phy_state {
223 PHY_DOWN=0,
224 PHY_STARTING,
225 PHY_READY,
226 PHY_PENDING,
227 PHY_UP,
228 PHY_AN,
229 PHY_RUNNING,
230 PHY_NOLINK,
231 PHY_FORCING,
232 PHY_CHANGELINK,
233 PHY_HALTED,
234 PHY_RESUMING
235};
236
Richard Cochranc1f19b52010-07-17 08:49:36 +0000237struct sk_buff;
238
Andy Fleming00db8182005-07-30 19:31:23 -0400239/* phy_device: An instance of a PHY
240 *
241 * drv: Pointer to the driver for this PHY instance
242 * bus: Pointer to the bus this PHY is on
243 * dev: driver model device structure for this PHY
244 * phy_id: UID for this device found during discovery
245 * state: state of the PHY for management purposes
246 * dev_flags: Device-specific flags used by the PHY driver.
247 * addr: Bus address of PHY
248 * link_timeout: The number of timer firings to wait before the
249 * giving up on the current attempt at acquiring a link
250 * irq: IRQ number of the PHY's interrupt (-1 if none)
251 * phy_timer: The timer for handling the state machine
252 * phy_queue: A work_queue for the interrupt
253 * attached_dev: The attached enet driver's device instance ptr
254 * adjust_link: Callback for the enet controller to respond to
255 * changes in the link state.
256 * adjust_state: Callback for the enet driver to respond to
257 * changes in the state machine.
258 *
259 * speed, duplex, pause, supported, advertising, and
260 * autoneg are used like in mii_if_info
261 *
262 * interrupts currently only supports enabled or disabled,
263 * but could be changed in the future to support enabling
264 * and disabling specific interrupts
265 *
266 * Contains some infrastructure for polling and interrupt
267 * handling, as well as handling shifts in PHY hardware state
268 */
269struct phy_device {
270 /* Information about the PHY type */
271 /* And management functions */
272 struct phy_driver *drv;
273
274 struct mii_bus *bus;
275
276 struct device dev;
277
278 u32 phy_id;
279
280 enum phy_state state;
281
282 u32 dev_flags;
283
Andy Fleminge8a2b6a2006-12-01 12:01:06 -0600284 phy_interface_t interface;
285
Peter Meerwaldc6883992010-09-02 04:06:24 +0000286 /* Bus address of the PHY (0-31) */
Andy Fleming00db8182005-07-30 19:31:23 -0400287 int addr;
288
Andy Flemingc5e38a92008-04-09 19:38:27 -0500289 /*
290 * forced speed & duplex (no autoneg)
Andy Fleming00db8182005-07-30 19:31:23 -0400291 * partner speed & duplex & pause (autoneg)
292 */
293 int speed;
294 int duplex;
295 int pause;
296 int asym_pause;
297
298 /* The most recently read link state */
299 int link;
300
301 /* Enabled Interrupts */
302 u32 interrupts;
303
304 /* Union of PHY and Attached devices' supported modes */
305 /* See mii.h for more info */
306 u32 supported;
307 u32 advertising;
308
309 int autoneg;
310
311 int link_timeout;
312
Andy Flemingc5e38a92008-04-09 19:38:27 -0500313 /*
314 * Interrupt number for this PHY
315 * -1 means no interrupt
316 */
Andy Fleming00db8182005-07-30 19:31:23 -0400317 int irq;
318
319 /* private data pointer */
320 /* For use by PHYs to maintain extra state */
321 void *priv;
322
323 /* Interrupt and Polling infrastructure */
324 struct work_struct phy_queue;
Marcin Slusarza390d1f2009-03-13 15:41:19 -0700325 struct delayed_work state_queue;
Maciej W. Rozycki0ac49522007-09-28 22:42:14 -0700326 atomic_t irq_disable;
Andy Fleming00db8182005-07-30 19:31:23 -0400327
Nate Case35b5f6b2008-01-29 10:05:09 -0600328 struct mutex lock;
Andy Fleming00db8182005-07-30 19:31:23 -0400329
330 struct net_device *attached_dev;
331
332 void (*adjust_link)(struct net_device *dev);
333
334 void (*adjust_state)(struct net_device *dev);
335};
336#define to_phy_device(d) container_of(d, struct phy_device, dev)
337
338/* struct phy_driver: Driver structure for a particular PHY type
339 *
340 * phy_id: The result of reading the UID registers of this PHY
341 * type, and ANDing them with the phy_id_mask. This driver
342 * only works for PHYs with IDs which match this field
343 * name: The friendly name of this PHY type
344 * phy_id_mask: Defines the important bits of the phy_id
345 * features: A list of features (speed, duplex, etc) supported
346 * by this PHY
347 * flags: A bitfield defining certain other features this PHY
348 * supports (like interrupts)
349 *
350 * The drivers must implement config_aneg and read_status. All
351 * other functions are optional. Note that none of these
352 * functions should be called from interrupt time. The goal is
353 * for the bus read/write functions to be able to block when the
354 * bus transaction is happening, and be freed up by an interrupt
355 * (The MPC85xx has this ability, though it is not currently
356 * supported in the driver).
357 */
358struct phy_driver {
359 u32 phy_id;
360 char *name;
361 unsigned int phy_id_mask;
362 u32 features;
363 u32 flags;
364
Andy Flemingc5e38a92008-04-09 19:38:27 -0500365 /*
366 * Called to initialize the PHY,
367 * including after a reset
368 */
Andy Fleming00db8182005-07-30 19:31:23 -0400369 int (*config_init)(struct phy_device *phydev);
370
Andy Flemingc5e38a92008-04-09 19:38:27 -0500371 /*
372 * Called during discovery. Used to set
373 * up device-specific structures, if any
374 */
Andy Fleming00db8182005-07-30 19:31:23 -0400375 int (*probe)(struct phy_device *phydev);
376
377 /* PHY Power Management */
378 int (*suspend)(struct phy_device *phydev);
379 int (*resume)(struct phy_device *phydev);
380
Andy Flemingc5e38a92008-04-09 19:38:27 -0500381 /*
382 * Configures the advertisement and resets
Andy Fleming00db8182005-07-30 19:31:23 -0400383 * autonegotiation if phydev->autoneg is on,
384 * forces the speed to the current settings in phydev
Andy Flemingc5e38a92008-04-09 19:38:27 -0500385 * if phydev->autoneg is off
386 */
Andy Fleming00db8182005-07-30 19:31:23 -0400387 int (*config_aneg)(struct phy_device *phydev);
388
389 /* Determines the negotiated speed and duplex */
390 int (*read_status)(struct phy_device *phydev);
391
392 /* Clears any pending interrupts */
393 int (*ack_interrupt)(struct phy_device *phydev);
394
395 /* Enables or disables interrupts */
396 int (*config_intr)(struct phy_device *phydev);
397
Anatolij Gustschina8729eb2009-04-07 02:01:42 +0000398 /*
399 * Checks if the PHY generated an interrupt.
400 * For multi-PHY devices with shared PHY interrupt pin
401 */
402 int (*did_interrupt)(struct phy_device *phydev);
403
Andy Fleming00db8182005-07-30 19:31:23 -0400404 /* Clears up any memory if needed */
405 void (*remove)(struct phy_device *phydev);
406
Richard Cochranc1f19b52010-07-17 08:49:36 +0000407 /* Handles SIOCSHWTSTAMP ioctl for hardware time stamping. */
408 int (*hwtstamp)(struct phy_device *phydev, struct ifreq *ifr);
409
410 /*
411 * Requests a Rx timestamp for 'skb'. If the skb is accepted,
412 * the phy driver promises to deliver it using netif_rx() as
413 * soon as a timestamp becomes available. One of the
414 * PTP_CLASS_ values is passed in 'type'. The function must
415 * return true if the skb is accepted for delivery.
416 */
417 bool (*rxtstamp)(struct phy_device *dev, struct sk_buff *skb, int type);
418
419 /*
420 * Requests a Tx timestamp for 'skb'. The phy driver promises
421 * to deliver it to the socket's error queue as soon as a
422 * timestamp becomes available. One of the PTP_CLASS_ values
423 * is passed in 'type'.
424 */
425 void (*txtstamp)(struct phy_device *dev, struct sk_buff *skb, int type);
426
Andy Fleming00db8182005-07-30 19:31:23 -0400427 struct device_driver driver;
428};
429#define to_phy_driver(d) container_of(d, struct phy_driver, driver)
430
Andy Flemingf62220d2008-04-18 17:29:54 -0500431#define PHY_ANY_ID "MATCH ANY PHY"
432#define PHY_ANY_UID 0xffffffff
433
434/* A Structure for boards to register fixups with the PHY Lib */
435struct phy_fixup {
436 struct list_head list;
David S. Miller8e401ec2009-05-26 21:16:25 -0700437 char bus_id[20];
Andy Flemingf62220d2008-04-18 17:29:54 -0500438 u32 phy_uid;
439 u32 phy_uid_mask;
440 int (*run)(struct phy_device *phydev);
441};
442
Lennert Buytenhek2e888102008-09-29 17:12:35 +0000443/**
444 * phy_read - Convenience function for reading a given PHY register
445 * @phydev: the phy_device struct
446 * @regnum: register number to read
447 *
448 * NOTE: MUST NOT be called from interrupt context,
449 * because the bus read/write functions may wait for an interrupt
450 * to conclude the operation.
451 */
Jason Gunthorpeabf35df2010-03-09 09:17:42 +0000452static inline int phy_read(struct phy_device *phydev, u32 regnum)
Lennert Buytenhek2e888102008-09-29 17:12:35 +0000453{
454 return mdiobus_read(phydev->bus, phydev->addr, regnum);
455}
456
457/**
458 * phy_write - Convenience function for writing a given PHY register
459 * @phydev: the phy_device struct
460 * @regnum: register number to write
461 * @val: value to write to @regnum
462 *
463 * NOTE: MUST NOT be called from interrupt context,
464 * because the bus read/write functions may wait for an interrupt
465 * to conclude the operation.
466 */
Jason Gunthorpeabf35df2010-03-09 09:17:42 +0000467static inline int phy_write(struct phy_device *phydev, u32 regnum, u16 val)
Lennert Buytenhek2e888102008-09-29 17:12:35 +0000468{
469 return mdiobus_write(phydev->bus, phydev->addr, regnum, val);
470}
471
Paul Gortmakercac1f3c2008-04-15 12:49:21 -0400472int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id);
Andy Fleming00db8182005-07-30 19:31:23 -0400473struct phy_device* get_phy_device(struct mii_bus *bus, int addr);
Grant Likely4dea5472009-04-25 12:52:46 +0000474int phy_device_register(struct phy_device *phy);
Anton Vorontsov2f5cb432009-12-30 08:23:30 +0000475int phy_init_hw(struct phy_device *phydev);
Andy Fleminge1393452005-08-24 18:46:21 -0500476struct phy_device * phy_attach(struct net_device *dev,
Andy Flemingf62220d2008-04-18 17:29:54 -0500477 const char *bus_id, u32 flags, phy_interface_t interface);
Jiri Pirkof8f76db2010-02-04 10:23:02 -0800478struct phy_device *phy_find_first(struct mii_bus *bus);
Grant Likelyfa94f6d2009-04-25 12:52:51 +0000479int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
480 void (*handler)(struct net_device *), u32 flags,
481 phy_interface_t interface);
Andy Flemingf62220d2008-04-18 17:29:54 -0500482struct phy_device * phy_connect(struct net_device *dev, const char *bus_id,
Andy Fleminge8a2b6a2006-12-01 12:01:06 -0600483 void (*handler)(struct net_device *), u32 flags,
484 phy_interface_t interface);
Andy Fleminge1393452005-08-24 18:46:21 -0500485void phy_disconnect(struct phy_device *phydev);
486void phy_detach(struct phy_device *phydev);
487void phy_start(struct phy_device *phydev);
488void phy_stop(struct phy_device *phydev);
489int phy_start_aneg(struct phy_device *phydev);
490
Andy Fleminge1393452005-08-24 18:46:21 -0500491int phy_stop_interrupts(struct phy_device *phydev);
Andy Fleming00db8182005-07-30 19:31:23 -0400492
493static inline int phy_read_status(struct phy_device *phydev) {
494 return phydev->drv->read_status(phydev);
495}
496
Andy Fleming00db8182005-07-30 19:31:23 -0400497int genphy_restart_aneg(struct phy_device *phydev);
498int genphy_config_aneg(struct phy_device *phydev);
499int genphy_update_link(struct phy_device *phydev);
500int genphy_read_status(struct phy_device *phydev);
Giuseppe Cavallaro0f0ca342008-11-28 16:24:56 -0800501int genphy_suspend(struct phy_device *phydev);
502int genphy_resume(struct phy_device *phydev);
Andy Fleming00db8182005-07-30 19:31:23 -0400503void phy_driver_unregister(struct phy_driver *drv);
504int phy_driver_register(struct phy_driver *new_driver);
Anton Vorontsov4f9c85a2010-01-18 05:37:16 +0000505void phy_state_machine(struct work_struct *work);
Andy Fleming00db8182005-07-30 19:31:23 -0400506void phy_start_machine(struct phy_device *phydev,
507 void (*handler)(struct net_device *));
508void phy_stop_machine(struct phy_device *phydev);
509int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
510int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
511int phy_mii_ioctl(struct phy_device *phydev,
Richard Cochran28b04112010-07-17 08:48:55 +0000512 struct ifreq *ifr, int cmd);
Andy Fleminge1393452005-08-24 18:46:21 -0500513int phy_start_interrupts(struct phy_device *phydev);
514void phy_print_status(struct phy_device *phydev);
Anton Vorontsov6f4a7f42007-12-04 16:17:33 +0300515void phy_device_free(struct phy_device *phydev);
Andy Fleming00db8182005-07-30 19:31:23 -0400516
Andy Flemingf62220d2008-04-18 17:29:54 -0500517int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
518 int (*run)(struct phy_device *));
519int phy_register_fixup_for_id(const char *bus_id,
520 int (*run)(struct phy_device *));
521int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
522 int (*run)(struct phy_device *));
523int phy_scan_fixups(struct phy_device *phydev);
524
Andy Fleming9b9a8bf2008-05-02 13:00:51 -0500525int __init mdio_bus_init(void);
526void mdio_bus_exit(void);
527
Andy Fleming00db8182005-07-30 19:31:23 -0400528extern struct bus_type mdio_bus_type;
Andy Fleming00db8182005-07-30 19:31:23 -0400529#endif /* __PHY_H */