blob: 07c03b9eb126b2fe3a61467b55b49dc7a6c412ed [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# Serial device configuration
3#
Linus Torvalds1da177e2005-04-16 15:20:36 -07004
5menu "Serial drivers"
Martin Schwidefskye25df122007-05-10 15:45:57 +02006 depends on HAS_IOMEM
Linus Torvalds1da177e2005-04-16 15:20:36 -07007
8#
9# The new 8250/16550 serial drivers
10config SERIAL_8250
11 tristate "8250/16550 and compatible serial support"
Linus Torvalds1da177e2005-04-16 15:20:36 -070012 select SERIAL_CORE
13 ---help---
14 This selects whether you want to include the driver for the standard
15 serial ports. The standard answer is Y. People who might say N
16 here are those that are setting up dedicated Ethernet WWW/FTP
17 servers, or users that have one of the various bus mice instead of a
18 serial mouse and don't intend to use their machine's standard serial
19 port for anything. (Note that the Cyclades and Stallion multi
20 serial port drivers do not need this driver built in for them to
21 work.)
22
23 To compile this driver as a module, choose M here: the
Timothy Charles McGrathdf7559d2006-01-23 09:50:09 +000024 module will be called 8250.
Linus Torvalds1da177e2005-04-16 15:20:36 -070025 [WARNING: Do not compile this driver as a module if you are using
26 non-standard serial ports, since the configuration information will
27 be lost when the driver is unloaded. This limitation may be lifted
28 in the future.]
29
30 BTW1: If you have a mouseman serial mouse which is not recognized by
31 the X window system, try running gpm first.
32
33 BTW2: If you intend to use a software modem (also called Winmodem)
34 under Linux, forget it. These modems are crippled and require
35 proprietary drivers which are only available under Windows.
36
37 Most people will say Y or M here, so that they can use serial mice,
38 modems and similar devices connecting to the standard serial ports.
39
40config SERIAL_8250_CONSOLE
41 bool "Console on 8250/16550 and compatible serial port"
42 depends on SERIAL_8250=y
43 select SERIAL_CORE_CONSOLE
44 ---help---
45 If you say Y here, it will be possible to use a serial port as the
46 system console (the system console is the device which receives all
47 kernel messages and warnings and which allows logins in single user
48 mode). This could be useful if some terminal or printer is connected
49 to that serial port.
50
51 Even if you say Y here, the currently visible virtual console
52 (/dev/tty0) will still be used as the system console by default, but
53 you can alter that using a kernel command line option such as
54 "console=ttyS1". (Try "man bootparam" or see the documentation of
55 your boot loader (grub or lilo or loadlin) about how to pass options
56 to the kernel at boot time.)
57
58 If you don't have a VGA card installed and you say Y here, the
59 kernel will automatically use the first serial line, /dev/ttyS0, as
60 system console.
61
Matt LaPlante01dd2fb2007-10-20 01:34:40 +020062 You can set that using a kernel command line option such as
Yinghai Lu18a8bd92007-07-15 23:37:59 -070063 "console=uart8250,io,0x3f8,9600n8"
64 "console=uart8250,mmio,0xff5e0000,115200n8".
Matt LaPlante01dd2fb2007-10-20 01:34:40 +020065 and it will switch to normal serial console when the corresponding
66 port is ready.
Yinghai Lu18a8bd92007-07-15 23:37:59 -070067 "earlycon=uart8250,io,0x3f8,9600n8"
68 "earlycon=uart8250,mmio,0xff5e0000,115200n8".
69 it will not only setup early console.
70
Linus Torvalds1da177e2005-04-16 15:20:36 -070071 If unsure, say N.
72
Yinghai Lu18a8bd92007-07-15 23:37:59 -070073config FIX_EARLYCON_MEM
74 bool
75 depends on X86
76 default y
77
Russell King0cff2602006-03-29 22:03:38 +010078config SERIAL_8250_GSC
79 tristate
80 depends on SERIAL_8250 && GSC
81 default SERIAL_8250
82
83config SERIAL_8250_PCI
84 tristate "8250/16550 PCI device support" if EMBEDDED
85 depends on SERIAL_8250 && PCI
86 default SERIAL_8250
87 help
Andrew Morton57d48102007-07-31 00:38:02 -070088 This builds standard PCI serial support. You may be able to
89 disable this feature if you only need legacy serial support.
90 Saves about 9K.
Russell King0cff2602006-03-29 22:03:38 +010091
92config SERIAL_8250_PNP
93 tristate "8250/16550 PNP device support" if EMBEDDED
94 depends on SERIAL_8250 && PNP
95 default SERIAL_8250
96 help
Andrew Morton57d48102007-07-31 00:38:02 -070097 This builds standard PNP serial support. You may be able to
98 disable this feature if you only need legacy serial support.
Russell King0cff2602006-03-29 22:03:38 +010099
100config SERIAL_8250_HP300
101 tristate
102 depends on SERIAL_8250 && HP300
103 default SERIAL_8250
104
Linus Torvalds1da177e2005-04-16 15:20:36 -0700105config SERIAL_8250_CS
106 tristate "8250/16550 PCMCIA device support"
107 depends on PCMCIA && SERIAL_8250
108 ---help---
109 Say Y here to enable support for 16-bit PCMCIA serial devices,
110 including serial port cards, modems, and the modem functions of
111 multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are
112 credit-card size devices often used with laptops.)
113
114 To compile this driver as a module, choose M here: the
115 module will be called serial_cs.
116
117 If unsure, say N.
118
Linus Torvalds1da177e2005-04-16 15:20:36 -0700119config SERIAL_8250_NR_UARTS
Russell King026d02a2005-06-29 18:45:19 +0100120 int "Maximum number of 8250/16550 serial ports"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700121 depends on SERIAL_8250
122 default "4"
Russell Kingec9f47c2005-06-27 11:12:54 +0100123 help
124 Set this to the number of serial ports you want the driver
125 to support. This includes any ports discovered via ACPI or
126 PCI enumeration and any ports that may be added at run-time
127 via hot-plug, or any ISA multi-port serial cards.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700128
Dave Jonesa61c2d72006-01-07 23:18:19 +0000129config SERIAL_8250_RUNTIME_UARTS
130 int "Number of 8250/16550 serial ports to register at runtime"
131 depends on SERIAL_8250
Russell King9a8ffcc2006-02-03 22:05:42 +0000132 range 0 SERIAL_8250_NR_UARTS
Dave Jonesa61c2d72006-01-07 23:18:19 +0000133 default "4"
134 help
135 Set this to the maximum number of serial ports you want
Matt LaPlante09509602006-10-03 22:31:37 +0200136 the kernel to register at boot time. This can be overridden
Dave Jonesa61c2d72006-01-07 23:18:19 +0000137 with the module parameter "nr_uarts", or boot-time parameter
138 8250.nr_uarts
139
Linus Torvalds1da177e2005-04-16 15:20:36 -0700140config SERIAL_8250_EXTENDED
141 bool "Extended 8250/16550 serial driver options"
142 depends on SERIAL_8250
143 help
144 If you wish to use any non-standard features of the standard "dumb"
145 driver, say Y here. This includes HUB6 support, shared serial
146 interrupts, special multiport support, support for more than the
147 four COM 1/2/3/4 boards, etc.
148
149 Note that the answer to this question won't directly affect the
150 kernel: saying N will just cause the configurator to skip all
151 the questions about serial driver options. If unsure, say N.
152
153config SERIAL_8250_MANY_PORTS
154 bool "Support more than 4 legacy serial ports"
155 depends on SERIAL_8250_EXTENDED && !IA64
156 help
157 Say Y here if you have dumb serial boards other than the four
158 standard COM 1/2/3/4 ports. This may happen if you have an AST
159 FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available
160 from <http://www.tldp.org/docs.html#howto>), or other custom
161 serial port hardware which acts similar to standard serial port
162 hardware. If you only use the standard COM 1/2/3/4 ports, you can
163 say N here to save some memory. You can also say Y if you have an
164 "intelligent" multiport card such as Cyclades, Digiboards, etc.
165
Russell Kingec9f47c2005-06-27 11:12:54 +0100166#
167# Multi-port serial cards
168#
169
170config SERIAL_8250_FOURPORT
171 tristate "Support Fourport cards"
172 depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
173 help
174 Say Y here if you have an AST FourPort serial board.
175
176 To compile this driver as a module, choose M here: the module
177 will be called 8250_fourport.
178
179config SERIAL_8250_ACCENT
180 tristate "Support Accent cards"
181 depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
182 help
183 Say Y here if you have an Accent Async serial board.
184
185 To compile this driver as a module, choose M here: the module
186 will be called 8250_accent.
187
Russell Kingec9f47c2005-06-27 11:12:54 +0100188config SERIAL_8250_BOCA
189 tristate "Support Boca cards"
190 depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
191 help
192 Say Y here if you have a Boca serial board. Please read the Boca
Matt LaPlante09509602006-10-03 22:31:37 +0200193 mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>
Russell Kingec9f47c2005-06-27 11:12:54 +0100194
195 To compile this driver as a module, choose M here: the module
196 will be called 8250_boca.
197
Paul B Schroedere0980da2006-12-06 20:37:03 -0800198config SERIAL_8250_EXAR_ST16C554
199 tristate "Support Exar ST16C554/554D Quad UART"
200 depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
201 help
202 The Uplogix Envoy TU301 uses this Exar Quad UART. If you are
203 tinkering with your Envoy TU301, or have a machine with this UART,
204 say Y here.
205
206 To compile this driver as a module, choose M here: the module
207 will be called 8250_exar_st16c554.
208
Russell Kingec9f47c2005-06-27 11:12:54 +0100209config SERIAL_8250_HUB6
210 tristate "Support Hub6 cards"
211 depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
212 help
213 Say Y here if you have a HUB6 serial board.
214
215 To compile this driver as a module, choose M here: the module
216 will be called 8250_hub6.
217
Don Mullisbf4735a2006-12-10 02:18:37 -0800218config SERIAL_8250_SHARE_IRQ
219 bool "Support for sharing serial interrupts"
220 depends on SERIAL_8250_EXTENDED
221 help
222 Some serial boards have hardware support which allows multiple dumb
223 serial ports on the same board to share a single IRQ. To enable
224 support for this in the serial driver, say Y here.
225
226config SERIAL_8250_DETECT_IRQ
227 bool "Autodetect IRQ on standard ports (unsafe)"
228 depends on SERIAL_8250_EXTENDED
229 help
230 Say Y here if you want the kernel to try to guess which IRQ
231 to use for your serial port.
232
233 This is considered unsafe; it is far better to configure the IRQ in
234 a boot script using the setserial command.
235
236 If unsure, say N.
237
238config SERIAL_8250_RSA
239 bool "Support RSA serial ports"
240 depends on SERIAL_8250_EXTENDED
241 help
242 ::: To be written :::
243
Russell Kingec9f47c2005-06-27 11:12:54 +0100244config SERIAL_8250_MCA
245 tristate "Support 8250-type ports on MCA buses"
246 depends on SERIAL_8250 != n && MCA
247 help
248 Say Y here if you have a MCA serial ports.
249
250 To compile this driver as a module, choose M here: the module
251 will be called 8250_mca.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700252
253config SERIAL_8250_ACORN
254 tristate "Acorn expansion card serial port support"
Russell Kingec9f47c2005-06-27 11:12:54 +0100255 depends on ARCH_ACORN && SERIAL_8250
Linus Torvalds1da177e2005-04-16 15:20:36 -0700256 help
257 If you have an Atomwide Serial card or Serial Port card for an Acorn
258 system, say Y to this option. The driver can handle 1, 2, or 3 port
259 cards. If unsure, say N.
260
Pantelis Antoniou21c614a2005-11-06 09:07:03 +0000261config SERIAL_8250_AU1X00
Sergei Shtylyov6e766452008-04-04 00:02:53 +0400262 bool "Au1x00 serial port support"
Pantelis Antoniou21c614a2005-11-06 09:07:03 +0000263 depends on SERIAL_8250 != n && SOC_AU1X00
264 help
Sergei Shtylyov6e766452008-04-04 00:02:53 +0400265 If you have an Au1x00 SOC based board and want to use the serial port,
266 say Y to this option. The driver can handle up to 4 serial ports,
267 depending on the SOC. If unsure, say N.
Pantelis Antoniou21c614a2005-11-06 09:07:03 +0000268
Thomas Koellerbd71c182007-05-06 14:48:47 -0700269config SERIAL_8250_RM9K
270 bool "Support for MIPS RM9xxx integrated serial port"
271 depends on SERIAL_8250 != n && SERIAL_RM9000
272 select SERIAL_8250_SHARE_IRQ
273 help
274 Selecting this option will add support for the integrated serial
275 port hardware found on MIPS RM9122 and similar processors.
276 If unsure, say N.
277
Russell Kingec9f47c2005-06-27 11:12:54 +0100278comment "Non-8250 serial port support"
279
Linus Torvalds1da177e2005-04-16 15:20:36 -0700280config SERIAL_AMBA_PL010
281 tristate "ARM AMBA PL010 serial port support"
Al Viro84b6a232005-08-23 22:46:16 +0100282 depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700283 select SERIAL_CORE
284 help
285 This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
Lennert Buytenhek00584712007-02-05 16:10:22 -0800286 an Integrator/AP or Integrator/PP2 platform, or if you have a
287 Cirrus Logic EP93xx CPU, say Y or M here.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700288
289 If unsure, say N.
290
291config SERIAL_AMBA_PL010_CONSOLE
292 bool "Support for console on AMBA serial port"
293 depends on SERIAL_AMBA_PL010=y
294 select SERIAL_CORE_CONSOLE
295 ---help---
296 Say Y here if you wish to use an AMBA PrimeCell UART as the system
297 console (the system console is the device which receives all kernel
298 messages and warnings and which allows logins in single user mode).
299
300 Even if you say Y here, the currently visible framebuffer console
301 (/dev/tty0) will still be used as the system console by default, but
302 you can alter that using a kernel command line option such as
303 "console=ttyAM0". (Try "man bootparam" or see the documentation of
304 your boot loader (lilo or loadlin) about how to pass options to the
305 kernel at boot time.)
306
307config SERIAL_AMBA_PL011
308 tristate "ARM AMBA PL011 serial port support"
309 depends on ARM_AMBA
310 select SERIAL_CORE
311 help
312 This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have
313 an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M
314 here.
315
316 If unsure, say N.
317
318config SERIAL_AMBA_PL011_CONSOLE
319 bool "Support for console on AMBA serial port"
320 depends on SERIAL_AMBA_PL011=y
321 select SERIAL_CORE_CONSOLE
322 ---help---
323 Say Y here if you wish to use an AMBA PrimeCell UART as the system
324 console (the system console is the device which receives all kernel
325 messages and warnings and which allows logins in single user mode).
326
327 Even if you say Y here, the currently visible framebuffer console
328 (/dev/tty0) will still be used as the system console by default, but
329 you can alter that using a kernel command line option such as
Peter Korsgaardb22b4cd2006-09-29 02:00:23 -0700330 "console=ttyAMA0". (Try "man bootparam" or see the documentation of
Linus Torvalds1da177e2005-04-16 15:20:36 -0700331 your boot loader (lilo or loadlin) about how to pass options to the
332 kernel at boot time.)
333
Maciej W. Rozyckib45d5272007-07-17 04:03:50 -0700334config SERIAL_SB1250_DUART
335 tristate "BCM1xxx on-chip DUART serial support"
336 depends on SIBYTE_SB1xxx_SOC=y
337 select SERIAL_CORE
338 default y
339 ---help---
340 Support for the asynchronous serial interface (DUART) included in
341 the BCM1250 and derived System-On-a-Chip (SOC) devices. Note that
342 the letter D in DUART stands for "dual", which is how the device
343 is implemented. Depending on the SOC configuration there may be
344 one or more DUARTs available of which all are handled.
345
346 If unsure, say Y. To compile this driver as a module, choose M here:
347 the module will be called sb1250-duart.
348
349config SERIAL_SB1250_DUART_CONSOLE
350 bool "Support for console on a BCM1xxx DUART serial port"
351 depends on SERIAL_SB1250_DUART=y
352 select SERIAL_CORE_CONSOLE
353 default y
354 ---help---
355 If you say Y here, it will be possible to use a serial port as the
356 system console (the system console is the device which receives all
357 kernel messages and warnings and which allows logins in single user
358 mode).
359
360 If unsure, say Y.
361
Haavard Skinnemoen749c4e62006-10-04 16:02:02 +0200362config SERIAL_ATMEL
363 bool "AT91 / AT32 on-chip serial port support"
Haavard Skinnemoenacca9b82006-10-04 16:02:09 +0200364 depends on (ARM && ARCH_AT91) || AVR32
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000365 select SERIAL_CORE
366 help
Andrew Victorafefc412006-06-19 19:53:19 +0100367 This enables the driver for the on-chip UARTs of the Atmel
Haavard Skinnemoenacca9b82006-10-04 16:02:09 +0200368 AT91 and AT32 processors.
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000369
Haavard Skinnemoen749c4e62006-10-04 16:02:02 +0200370config SERIAL_ATMEL_CONSOLE
371 bool "Support for console on AT91 / AT32 serial port"
372 depends on SERIAL_ATMEL=y
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000373 select SERIAL_CORE_CONSOLE
374 help
Haavard Skinnemoenacca9b82006-10-04 16:02:09 +0200375 Say Y here if you wish to use an on-chip UART on a Atmel
376 AT91 or AT32 processor as the system console (the system
377 console is the device which receives all kernel messages and
378 warnings and which allows logins in single user mode).
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000379
Chip Coldwella6670612008-02-08 04:21:06 -0800380config SERIAL_ATMEL_PDC
381 bool "Support DMA transfers on AT91 / AT32 serial port"
382 depends on SERIAL_ATMEL
383 default y
384 help
385 Say Y here if you wish to use the PDC to do DMA transfers to
386 and from the Atmel AT91 / AT32 serial port. In order to
387 actually use DMA transfers, make sure that the use_dma_tx
388 and use_dma_rx members in the atmel_uart_data struct is set
389 appropriately for each port.
390
391 Note that break and error handling currently doesn't work
392 properly when DMA is enabled. Make sure that ports where
393 this matters don't use DMA.
394
Haavard Skinnemoen749c4e62006-10-04 16:02:02 +0200395config SERIAL_ATMEL_TTYAT
Haavard Skinnemoenacca9b82006-10-04 16:02:09 +0200396 bool "Install as device ttyATn instead of ttySn"
Haavard Skinnemoen749c4e62006-10-04 16:02:02 +0200397 depends on SERIAL_ATMEL=y
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000398 help
Haavard Skinnemoenacca9b82006-10-04 16:02:09 +0200399 Say Y here if you wish to have the internal AT91 / AT32 UARTs
400 appear as /dev/ttyATn (major 204, minor starting at 154)
401 instead of the normal /dev/ttySn (major 4, minor starting at
402 64). This is necessary if you also want other UARTs, such as
403 external 8250/16C550 compatible UARTs.
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000404 The ttySn nodes are legally reserved for the 8250 serial driver
405 but are often misused by other serial drivers.
406
407 To use this, you should create suitable ttyATn device nodes in
408 /dev/, and pass "console=ttyATn" to the kernel.
409
410 Say Y if you have an external 8250/16C550 UART. If unsure, say N.
411
Andrew Victor2c7ee6a2007-05-11 21:37:25 +0100412config SERIAL_KS8695
413 bool "Micrel KS8695 (Centaur) serial port support"
414 depends on ARCH_KS8695
415 select SERIAL_CORE
416 help
417 This selects the Micrel Centaur KS8695 UART. Say Y here.
418
419config SERIAL_KS8695_CONSOLE
420 bool "Support for console on KS8695 (Centaur) serial port"
421 depends on SERIAL_KS8695=y
422 select SERIAL_CORE_CONSOLE
423 help
424 Say Y here if you wish to use a KS8695 (Centaur) UART as the
425 system console (the system console is the device which
426 receives all kernel messages and warnings and which allows
427 logins in single user mode).
428
Linus Torvalds1da177e2005-04-16 15:20:36 -0700429config SERIAL_CLPS711X
430 tristate "CLPS711X serial port support"
431 depends on ARM && ARCH_CLPS711X
432 select SERIAL_CORE
433 help
434 ::: To be written :::
435
436config SERIAL_CLPS711X_CONSOLE
437 bool "Support for console on CLPS711X serial port"
438 depends on SERIAL_CLPS711X=y
439 select SERIAL_CORE_CONSOLE
440 help
441 Even if you say Y here, the currently visible virtual console
442 (/dev/tty0) will still be used as the system console by default, but
443 you can alter that using a kernel command line option such as
444 "console=ttyCL1". (Try "man bootparam" or see the documentation of
445 your boot loader (lilo or loadlin) about how to pass options to the
446 kernel at boot time.)
447
Ben Dooksb4975492008-07-03 12:32:51 +0100448config SERIAL_SAMSUNG
449 tristate "Samsung SoC serial support"
Ben Dooksb690ace2008-10-21 14:07:03 +0100450 depends on ARM && PLAT_S3C
Arnaud Patard (Rtp19c1d6a2008-07-08 01:03:46 +0200451 select SERIAL_CORE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700452 help
Ben Dooks73e55cb2006-06-24 21:21:32 +0100453 Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700454 providing /dev/ttySAC0, 1 and 2 (note, some machines may not
455 provide all of these ports, depending on how the serial port
456 pins are configured.
457
Ben Dooks03d5e772008-11-03 09:21:23 +0000458config SERIAL_SAMSUNG_UARTS
459 int
Ben Dooks2fafae32009-01-08 13:21:17 +0000460 depends on ARM && PLAT_S3C
Ben Dooks03d5e772008-11-03 09:21:23 +0000461 default 2 if ARCH_S3C2400
462 default 4 if ARCH_S3C64XX || CPU_S3C2443
463 default 3
464 help
465 Select the number of available UART ports for the Samsung S3C
466 serial driver
467
Ben Dooksb4975492008-07-03 12:32:51 +0100468config SERIAL_SAMSUNG_DEBUG
469 bool "Samsung SoC serial debug"
Ben Dooks5fed4a32008-10-16 16:46:08 +0100470 depends on SERIAL_SAMSUNG && DEBUG_LL
Ben Dooksb4975492008-07-03 12:32:51 +0100471 help
472 Add support for debugging the serial driver. Since this is
473 generally being used as a console, we use our own output
474 routines that go via the low-level debug printascii()
475 function.
Ben Dooks73e55cb2006-06-24 21:21:32 +0100476
Ben Dooksb4975492008-07-03 12:32:51 +0100477config SERIAL_SAMSUNG_CONSOLE
478 bool "Support for console on Samsung SoC serial port"
479 depends on SERIAL_SAMSUNG=y
Linus Torvalds1da177e2005-04-16 15:20:36 -0700480 select SERIAL_CORE_CONSOLE
481 help
Ben Dooks73e55cb2006-06-24 21:21:32 +0100482 Allow selection of the S3C24XX on-board serial ports for use as
Linus Torvalds1da177e2005-04-16 15:20:36 -0700483 an virtual console.
484
485 Even if you say Y here, the currently visible virtual console
486 (/dev/tty0) will still be used as the system console by default, but
487 you can alter that using a kernel command line option such as
488 "console=ttySACx". (Try "man bootparam" or see the documentation of
489 your boot loader about how to pass options to the kernel at
490 boot time.)
491
Ben Dooksb4975492008-07-03 12:32:51 +0100492config SERIAL_S3C2400
493 tristate "Samsung S3C2410 Serial port support"
494 depends on ARM && SERIAL_SAMSUNG && CPU_S3C2400
495 default y if CPU_S3C2400
496 help
497 Serial port support for the Samsung S3C2400 SoC
498
499config SERIAL_S3C2410
500 tristate "Samsung S3C2410 Serial port support"
501 depends on SERIAL_SAMSUNG && CPU_S3C2410
502 default y if CPU_S3C2410
503 help
504 Serial port support for the Samsung S3C2410 SoC
505
506config SERIAL_S3C2412
507 tristate "Samsung S3C2412/S3C2413 Serial port support"
508 depends on SERIAL_SAMSUNG && CPU_S3C2412
509 default y if CPU_S3C2412
510 help
511 Serial port support for the Samsung S3C2412 and S3C2413 SoC
512
513config SERIAL_S3C2440
514 tristate "Samsung S3C2440/S3C2442 Serial port support"
515 depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442)
516 default y if CPU_S3C2440
517 default y if CPU_S3C2442
518 help
519 Serial port support for the Samsung S3C2440 and S3C2442 SoC
520
Sandeep Patil1d4bab02008-10-21 14:06:30 +0100521config SERIAL_S3C24A0
522 tristate "Samsung S3C24A0 Serial port support"
523 depends on SERIAL_SAMSUNG && CPU_S3C24A0
524 default y if CPU_S3C24A0
525 help
526 Serial port support for the Samsung S3C24A0 SoC
Ben Dooksb4975492008-07-03 12:32:51 +0100527
Ben Dooksb690ace2008-10-21 14:07:03 +0100528config SERIAL_S3C6400
529 tristate "Samsung S3C6400/S3C6410 Serial port support"
530 depends on SERIAL_SAMSUNG && (CPU_S3C600 || CPU_S3C6410)
531 default y
532 help
533 Serial port support for the Samsung S3C6400 and S3C6410
534 SoCs
535
Linus Torvalds1da177e2005-04-16 15:20:36 -0700536config SERIAL_DZ
537 bool "DECstation DZ serial driver"
Ralf Baechle875d43e2005-09-03 15:56:16 -0700538 depends on MACH_DECSTATION && 32BIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700539 select SERIAL_CORE
Maciej W. Rozycki7287d762008-02-07 00:15:09 -0800540 default y
541 ---help---
542 DZ11-family serial controllers for DECstations and VAXstations,
543 including the DC7085, M7814, and M7819.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700544
545config SERIAL_DZ_CONSOLE
546 bool "Support console on DECstation DZ serial driver"
547 depends on SERIAL_DZ=y
548 select SERIAL_CORE_CONSOLE
Maciej W. Rozycki7287d762008-02-07 00:15:09 -0800549 default y
550 ---help---
Linus Torvalds1da177e2005-04-16 15:20:36 -0700551 If you say Y here, it will be possible to use a serial port as the
552 system console (the system console is the device which receives all
553 kernel messages and warnings and which allows logins in single user
Maciej W. Rozycki7287d762008-02-07 00:15:09 -0800554 mode).
555
556 Note that the firmware uses ttyS3 as the serial console on
557 DECstations that use this driver.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700558
559 If unsure, say Y.
560
Maciej W. Rozycki8b4a4082007-07-18 00:49:11 -0700561config SERIAL_ZS
562 tristate "DECstation Z85C30 serial support"
563 depends on MACH_DECSTATION
564 select SERIAL_CORE
565 default y
566 ---help---
567 Support for the Zilog 85C350 serial communications controller used
568 for serial ports in newer DECstation systems. These include the
569 DECsystem 5900 and all models of the DECstation and DECsystem 5000
570 systems except from model 200.
571
572 If unsure, say Y. To compile this driver as a module, choose M here:
573 the module will be called zs.
574
575config SERIAL_ZS_CONSOLE
576 bool "Support for console on a DECstation Z85C30 serial port"
577 depends on SERIAL_ZS=y
578 select SERIAL_CORE_CONSOLE
579 default y
580 ---help---
581 If you say Y here, it will be possible to use a serial port as the
582 system console (the system console is the device which receives all
583 kernel messages and warnings and which allows logins in single user
584 mode).
585
586 Note that the firmware uses ttyS1 as the serial console on the
587 Maxine and ttyS3 on the others using this driver.
588
589 If unsure, say Y.
590
Linus Torvalds1da177e2005-04-16 15:20:36 -0700591config SERIAL_21285
592 tristate "DC21285 serial port support"
593 depends on ARM && FOOTBRIDGE
594 select SERIAL_CORE
595 help
596 If you have a machine based on a 21285 (Footbridge) StrongARM(R)/
597 PCI bridge you can enable its onboard serial port by enabling this
598 option.
599
600config SERIAL_21285_CONSOLE
601 bool "Console on DC21285 serial port"
602 depends on SERIAL_21285=y
603 select SERIAL_CORE_CONSOLE
604 help
605 If you have enabled the serial port on the 21285 footbridge you can
606 make it the console by answering Y to this option.
607
608 Even if you say Y here, the currently visible virtual console
609 (/dev/tty0) will still be used as the system console by default, but
610 you can alter that using a kernel command line option such as
611 "console=ttyFB". (Try "man bootparam" or see the documentation of
612 your boot loader (lilo or loadlin) about how to pass options to the
613 kernel at boot time.)
614
Linus Torvalds1da177e2005-04-16 15:20:36 -0700615config SERIAL_MPSC
616 bool "Marvell MPSC serial port support"
617 depends on PPC32 && MV64X60
618 select SERIAL_CORE
619 help
620 Say Y here if you want to use the Marvell MPSC serial controller.
621
622config SERIAL_MPSC_CONSOLE
623 bool "Support for console on Marvell MPSC serial port"
624 depends on SERIAL_MPSC
625 select SERIAL_CORE_CONSOLE
626 help
627 Say Y here if you want to support a serial console on a Marvell MPSC.
628
629config SERIAL_PXA
630 bool "PXA serial port support"
Eric Miao56422552009-02-05 13:42:47 +0800631 depends on ARCH_PXA || ARCH_MMP
Linus Torvalds1da177e2005-04-16 15:20:36 -0700632 select SERIAL_CORE
633 help
634 If you have a machine based on an Intel XScale PXA2xx CPU you
635 can enable its onboard serial ports by enabling this option.
636
637config SERIAL_PXA_CONSOLE
638 bool "Console on PXA serial port"
639 depends on SERIAL_PXA
640 select SERIAL_CORE_CONSOLE
641 help
642 If you have enabled the serial port on the Intel XScale PXA
643 CPU you can make it the console by answering Y to this option.
644
645 Even if you say Y here, the currently visible virtual console
646 (/dev/tty0) will still be used as the system console by default, but
647 you can alter that using a kernel command line option such as
648 "console=ttySA0". (Try "man bootparam" or see the documentation of
649 your boot loader (lilo or loadlin) about how to pass options to the
650 kernel at boot time.)
651
652config SERIAL_SA1100
653 bool "SA1100 serial port support"
654 depends on ARM && ARCH_SA1100
655 select SERIAL_CORE
656 help
657 If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
658 can enable its onboard serial port by enabling this option.
659 Please read <file:Documentation/arm/SA1100/serial_UART> for further
660 info.
661
662config SERIAL_SA1100_CONSOLE
663 bool "Console on SA1100 serial port"
664 depends on SERIAL_SA1100
665 select SERIAL_CORE_CONSOLE
666 help
667 If you have enabled the serial port on the SA1100/SA1110 StrongARM
668 CPU you can make it the console by answering Y to this option.
669
670 Even if you say Y here, the currently visible virtual console
671 (/dev/tty0) will still be used as the system console by default, but
672 you can alter that using a kernel command line option such as
673 "console=ttySA0". (Try "man bootparam" or see the documentation of
674 your boot loader (lilo or loadlin) about how to pass options to the
675 kernel at boot time.)
676
Bryan Wu194de562007-05-06 14:50:30 -0700677config SERIAL_BFIN
678 tristate "Blackfin serial port support"
Mike Frysinger529a73f2007-11-23 14:28:44 +0800679 depends on BLACKFIN
Bryan Wu194de562007-05-06 14:50:30 -0700680 select SERIAL_CORE
681 select SERIAL_BFIN_UART0 if (BF531 || BF532 || BF533 || BF561)
682 help
683 Add support for the built-in UARTs on the Blackfin.
684
685 To compile this driver as a module, choose M here: the
686 module will be called bfin_5xx.
687
688config SERIAL_BFIN_CONSOLE
689 bool "Console on Blackfin serial port"
Adrian Bunk7111de72007-09-11 15:24:13 -0700690 depends on SERIAL_BFIN=y
Bryan Wu194de562007-05-06 14:50:30 -0700691 select SERIAL_CORE_CONSOLE
692
693choice
694 prompt "UART Mode"
695 depends on SERIAL_BFIN
696 default SERIAL_BFIN_DMA
697 help
698 This driver supports the built-in serial ports of the Blackfin family
699 of CPUs
700
701config SERIAL_BFIN_DMA
702 bool "DMA mode"
Mike Frysingereaa85492007-10-21 22:30:01 +0800703 depends on !DMA_UNCACHED_NONE && !KGDB_UART
Bryan Wu194de562007-05-06 14:50:30 -0700704 help
705 This driver works under DMA mode. If this option is selected, the
706 blackfin simple dma driver is also enabled.
707
708config SERIAL_BFIN_PIO
709 bool "PIO mode"
710 help
711 This driver works under PIO mode.
712
713endchoice
714
715config SERIAL_BFIN_UART0
716 bool "Enable UART0"
717 depends on SERIAL_BFIN
718 help
719 Enable UART0
720
721config BFIN_UART0_CTSRTS
722 bool "Enable UART0 hardware flow control"
723 depends on SERIAL_BFIN_UART0
724 help
725 Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS
726 signal.
727
728config UART0_CTS_PIN
729 int "UART0 CTS pin"
730 depends on BFIN_UART0_CTSRTS
731 default 23
732 help
733 The default pin is GPIO_GP7.
734 Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
735
736config UART0_RTS_PIN
737 int "UART0 RTS pin"
738 depends on BFIN_UART0_CTSRTS
739 default 22
740 help
741 The default pin is GPIO_GP6.
742 Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
743
744config SERIAL_BFIN_UART1
745 bool "Enable UART1"
Michael Hennerich09545562008-02-02 15:58:30 +0800746 depends on SERIAL_BFIN && (!BF531 && !BF532 && !BF533 && !BF561)
Bryan Wu194de562007-05-06 14:50:30 -0700747 help
748 Enable UART1
749
750config BFIN_UART1_CTSRTS
751 bool "Enable UART1 hardware flow control"
752 depends on SERIAL_BFIN_UART1
753 help
754 Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS
755 signal.
756
757config UART1_CTS_PIN
758 int "UART1 CTS pin"
Sonic Zhangdb288382008-02-02 17:05:02 +0800759 depends on BFIN_UART1_CTSRTS && !BF54x
Bryan Wu194de562007-05-06 14:50:30 -0700760 default -1
761 help
762 Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
763
764config UART1_RTS_PIN
765 int "UART1 RTS pin"
Sonic Zhangdb288382008-02-02 17:05:02 +0800766 depends on BFIN_UART1_CTSRTS && !BF54x
Bryan Wu194de562007-05-06 14:50:30 -0700767 default -1
768 help
769 Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
770
Roy Huangf4d640c92007-07-12 16:43:46 +0800771config SERIAL_BFIN_UART2
772 bool "Enable UART2"
Michael Hennerichf933d3c2009-04-06 17:32:21 +0100773 depends on SERIAL_BFIN && (BF54x || BF538 || BF539)
Roy Huangf4d640c92007-07-12 16:43:46 +0800774 help
775 Enable UART2
776
777config BFIN_UART2_CTSRTS
778 bool "Enable UART2 hardware flow control"
779 depends on SERIAL_BFIN_UART2
780 help
781 Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS
782 signal.
783
784config UART2_CTS_PIN
785 int "UART2 CTS pin"
786 depends on BFIN_UART2_CTSRTS
787 default -1
788 help
789 Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
790
791config UART2_RTS_PIN
792 int "UART2 RTS pin"
793 depends on BFIN_UART2_CTSRTS
794 default -1
795 help
796 Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
797
798config SERIAL_BFIN_UART3
799 bool "Enable UART3"
800 depends on SERIAL_BFIN && (BF54x)
801 help
802 Enable UART3
803
804config BFIN_UART3_CTSRTS
805 bool "Enable UART3 hardware flow control"
806 depends on SERIAL_BFIN_UART3
807 help
808 Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS
809 signal.
810
Linus Torvalds1da177e2005-04-16 15:20:36 -0700811config SERIAL_IMX
812 bool "IMX serial port support"
Sascha Hauere3d13ff2008-07-05 10:02:48 +0200813 depends on ARM && (ARCH_IMX || ARCH_MXC)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700814 select SERIAL_CORE
815 help
816 If you have a machine based on a Motorola IMX CPU you
817 can enable its onboard serial port by enabling this option.
818
819config SERIAL_IMX_CONSOLE
820 bool "Console on IMX serial port"
821 depends on SERIAL_IMX
822 select SERIAL_CORE_CONSOLE
823 help
824 If you have enabled the serial port on the Motorola IMX
825 CPU you can make it the console by answering Y to this option.
826
827 Even if you say Y here, the currently visible virtual console
828 (/dev/tty0) will still be used as the system console by default, but
829 you can alter that using a kernel command line option such as
830 "console=ttySA0". (Try "man bootparam" or see the documentation of
831 your boot loader (lilo or loadlin) about how to pass options to the
832 kernel at boot time.)
833
Peter Korsgaard238b8722006-12-06 20:35:17 -0800834config SERIAL_UARTLITE
835 tristate "Xilinx uartlite serial port support"
836 depends on PPC32
837 select SERIAL_CORE
838 help
839 Say Y here if you want to use the Xilinx uartlite serial controller.
840
841 To compile this driver as a module, choose M here: the
842 module will be called uartlite.ko.
843
844config SERIAL_UARTLITE_CONSOLE
845 bool "Support for console on Xilinx uartlite serial port"
846 depends on SERIAL_UARTLITE=y
847 select SERIAL_CORE_CONSOLE
848 help
849 Say Y here if you wish to use a Xilinx uartlite as the system
850 console (the system console is the device which receives all kernel
851 messages and warnings and which allows logins in single user mode).
852
Linus Torvalds1da177e2005-04-16 15:20:36 -0700853config SERIAL_SUNCORE
854 bool
Adrian Bunk0b57ee92005-12-22 21:03:47 -0800855 depends on SPARC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700856 select SERIAL_CORE
857 select SERIAL_CORE_CONSOLE
858 default y
859
860config SERIAL_SUNZILOG
861 tristate "Sun Zilog8530 serial support"
Adrian Bunk0b57ee92005-12-22 21:03:47 -0800862 depends on SPARC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700863 help
864 This driver supports the Zilog8530 serial ports found on many Sparc
865 systems. Say Y or M if you want to be able to these serial ports.
866
867config SERIAL_SUNZILOG_CONSOLE
868 bool "Console on Sun Zilog8530 serial port"
869 depends on SERIAL_SUNZILOG=y
870 help
871 If you would like to be able to use the Zilog8530 serial port
872 on your Sparc system as the console, you can do so by answering
873 Y to this option.
874
875config SERIAL_SUNSU
876 tristate "Sun SU serial support"
Adrian Bunk0b57ee92005-12-22 21:03:47 -0800877 depends on SPARC && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700878 help
879 This driver supports the 8250 serial ports that run the keyboard and
880 mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able
881 to these serial ports.
882
883config SERIAL_SUNSU_CONSOLE
884 bool "Console on Sun SU serial port"
885 depends on SERIAL_SUNSU=y
886 help
887 If you would like to be able to use the SU serial port
888 on your Sparc system as the console, you can do so by answering
889 Y to this option.
890
891config SERIAL_MUX
892 tristate "Serial MUX support"
Matthew Wilcox305f5162005-11-18 16:17:50 -0500893 depends on GSC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700894 select SERIAL_CORE
895 default y
896 ---help---
897 Saying Y here will enable the hardware MUX serial driver for
Carlos O'Donelle45da352006-09-16 14:35:51 -0400898 the Nova, K class systems and D class with a 'remote control card'.
899 The hardware MUX is not 8250/16550 compatible therefore the
900 /dev/ttyB0 device is shared between the Serial MUX and the PDC
901 software console. The following steps need to be completed to use
902 the Serial MUX:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700903
904 1. create the device entry (mknod /dev/ttyB0 c 11 0)
905 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
906 3. Add device ttyB0 to /etc/securetty (if you want to log on as
907 root on this console.)
908 4. Change the kernel command console parameter to: console=ttyB0
909
910config SERIAL_MUX_CONSOLE
Adrian Bunk7111de72007-09-11 15:24:13 -0700911 bool "Support for console on serial MUX"
912 depends on SERIAL_MUX=y
Linus Torvalds1da177e2005-04-16 15:20:36 -0700913 select SERIAL_CORE_CONSOLE
Adrian Bunk7111de72007-09-11 15:24:13 -0700914 default y
Linus Torvalds1da177e2005-04-16 15:20:36 -0700915
916config PDC_CONSOLE
917 bool "PDC software console support"
918 depends on PARISC && !SERIAL_MUX && VT
919 default n
920 help
921 Saying Y here will enable the software based PDC console to be
922 used as the system console. This is useful for machines in
923 which the hardware based console has not been written yet. The
924 following steps must be competed to use the PDC console:
925
926 1. create the device entry (mknod /dev/ttyB0 c 11 0)
927 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
928 3. Add device ttyB0 to /etc/securetty (if you want to log on as
929 root on this console.)
930 4. Change the kernel command console parameter to: console=ttyB0
931
932config SERIAL_SUNSAB
933 tristate "Sun Siemens SAB82532 serial support"
Adrian Bunk0b57ee92005-12-22 21:03:47 -0800934 depends on SPARC && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700935 help
936 This driver supports the Siemens SAB82532 DUSCC serial ports on newer
937 (PCI) UltraSPARC systems. Say Y or M if you want to be able to these
938 serial ports.
939
940config SERIAL_SUNSAB_CONSOLE
941 bool "Console on Sun Siemens SAB82532 serial port"
942 depends on SERIAL_SUNSAB=y
943 help
944 If you would like to be able to use the SAB82532 serial port
945 on your Sparc system as the console, you can do so by answering
946 Y to this option.
947
David S. Miller02fd4732006-02-11 02:25:21 -0800948config SERIAL_SUNHV
949 bool "Sun4v Hypervisor Console support"
950 depends on SPARC64
951 help
952 This driver supports the console device found on SUN4V Sparc
953 systems. Say Y if you want to be able to use this device.
954
Linus Torvalds1da177e2005-04-16 15:20:36 -0700955config SERIAL_IP22_ZILOG
Thomas Bogendoerfer5057c982008-02-06 01:37:26 -0800956 tristate "SGI Zilog8530 serial support"
957 depends on SGI_HAS_ZILOG
Linus Torvalds1da177e2005-04-16 15:20:36 -0700958 select SERIAL_CORE
959 help
Thomas Bogendoerfer5057c982008-02-06 01:37:26 -0800960 This driver supports the Zilog8530 serial ports found on SGI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700961 systems. Say Y or M if you want to be able to these serial ports.
962
963config SERIAL_IP22_ZILOG_CONSOLE
Thomas Bogendoerfer5057c982008-02-06 01:37:26 -0800964 bool "Console on SGI Zilog8530 serial port"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700965 depends on SERIAL_IP22_ZILOG=y
966 select SERIAL_CORE_CONSOLE
967
Linus Torvalds1da177e2005-04-16 15:20:36 -0700968config SERIAL_SH_SCI
Paul Mundtecd95612006-09-27 17:32:30 +0900969 tristate "SuperH SCI(F) serial port support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700970 depends on SUPERH || H8300
971 select SERIAL_CORE
972
Paul Mundtecd95612006-09-27 17:32:30 +0900973config SERIAL_SH_SCI_NR_UARTS
974 int "Maximum number of SCI(F) serial ports"
975 depends on SERIAL_SH_SCI
976 default "2"
977
Linus Torvalds1da177e2005-04-16 15:20:36 -0700978config SERIAL_SH_SCI_CONSOLE
Paul Mundtecd95612006-09-27 17:32:30 +0900979 bool "Support for console on SuperH SCI(F)"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700980 depends on SERIAL_SH_SCI=y
981 select SERIAL_CORE_CONSOLE
982
Vitaly Woolde8211b2007-02-14 00:33:09 -0800983config SERIAL_PNX8XXX
984 bool "Enable PNX8XXX SoCs' UART Support"
Ihar Hrachyshka11455be2009-01-27 11:50:46 +0000985 depends on MIPS && (SOC_PNX8550 || SOC_PNX833X)
Vitaly Woolde8211b2007-02-14 00:33:09 -0800986 select SERIAL_CORE
987 help
988 If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
989 and you want to use serial ports, say Y. Otherwise, say N.
990
991config SERIAL_PNX8XXX_CONSOLE
992 bool "Enable PNX8XX0 serial console"
993 depends on SERIAL_PNX8XXX
994 select SERIAL_CORE_CONSOLE
995 help
996 If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
997 and you want to use serial console, say Y. Otherwise, say N.
998
Linus Torvalds1da177e2005-04-16 15:20:36 -0700999config SERIAL_CORE
1000 tristate
1001
1002config SERIAL_CORE_CONSOLE
1003 bool
1004
Jason Wesself2d937f2008-04-17 20:05:37 +02001005config CONSOLE_POLL
1006 bool
1007
Linus Torvalds1da177e2005-04-16 15:20:36 -07001008config SERIAL_68328
1009 bool "68328 serial support"
1010 depends on M68328 || M68EZ328 || M68VZ328
1011 help
1012 This driver supports the built-in serial port of the Motorola 68328
Matt LaPlante09509602006-10-03 22:31:37 +02001013 (standard, EZ and VZ varieties).
Linus Torvalds1da177e2005-04-16 15:20:36 -07001014
1015config SERIAL_68328_RTS_CTS
1016 bool "Support RTS/CTS on 68328 serial port"
1017 depends on SERIAL_68328
1018
Greg Ungererae1b5f02008-02-01 17:32:00 +10001019config SERIAL_MCF
Adrian Bunk02f11f32008-10-13 10:31:59 +01001020 bool "Coldfire serial support"
Greg Ungererae1b5f02008-02-01 17:32:00 +10001021 depends on COLDFIRE
1022 select SERIAL_CORE
1023 help
Adrian Bunk02f11f32008-10-13 10:31:59 +01001024 This serial driver supports the Freescale Coldfire serial ports.
Greg Ungererae1b5f02008-02-01 17:32:00 +10001025
1026config SERIAL_MCF_BAUDRATE
1027 int "Default baudrate for Coldfire serial ports"
1028 depends on SERIAL_MCF
1029 default 19200
1030 help
1031 This setting lets you define what the default baudrate is for the
1032 ColdFire serial ports. The usual default varies from board to board,
1033 and this setting is a way of catering for that.
1034
1035config SERIAL_MCF_CONSOLE
1036 bool "Coldfire serial console support"
1037 depends on SERIAL_MCF
1038 select SERIAL_CORE_CONSOLE
1039 help
1040 Enable a ColdFire internal serial port to be the system console.
1041
Linus Torvalds1da177e2005-04-16 15:20:36 -07001042config SERIAL_68360_SMC
1043 bool "68360 SMC uart support"
1044 depends on M68360
1045 help
1046 This driver supports the SMC serial ports of the Motorola 68360 CPU.
1047
1048config SERIAL_68360_SCC
1049 bool "68360 SCC uart support"
1050 depends on M68360
1051 help
1052 This driver supports the SCC serial ports of the Motorola 68360 CPU.
1053
1054config SERIAL_68360
1055 bool
1056 depends on SERIAL_68360_SMC || SERIAL_68360_SCC
1057 default y
1058
1059config SERIAL_PMACZILOG
1060 tristate "PowerMac z85c30 ESCC support"
1061 depends on PPC_OF && PPC_PMAC
1062 select SERIAL_CORE
1063 help
1064 This driver supports the Zilog z85C30 serial ports found on
1065 PowerMac machines.
1066 Say Y or M if you want to be able to these serial ports.
1067
David Woodhousee4533b22007-04-05 00:19:43 +10001068config SERIAL_PMACZILOG_TTYS
1069 bool "Use ttySn device nodes for Zilog z85c30"
1070 depends on SERIAL_PMACZILOG
1071 help
1072 The pmac_zilog driver for the z85C30 chip on many powermacs
1073 historically used the device numbers for /dev/ttySn. The
1074 8250 serial port driver also uses these numbers, which means
1075 the two drivers being unable to coexist; you could not use
1076 both z85C30 and 8250 type ports at the same time.
1077
1078 If this option is not selected, the pmac_zilog driver will
1079 use the device numbers allocated for /dev/ttyPZn. This allows
1080 the pmac_zilog and 8250 drivers to co-exist, but may cause
1081 existing userspace setups to break. Programs that need to
1082 access the built-in serial ports on powermacs will need to
1083 be reconfigured to use /dev/ttyPZn instead of /dev/ttySn.
1084
1085 If you enable this option, any z85c30 ports in the system will
1086 be registered as ttyS0 onwards as in the past, and you will be
1087 unable to use the 8250 module for PCMCIA or other 16C550-style
1088 UARTs.
1089
1090 Say N unless you need the z85c30 ports on your powermac
1091 to appear as /dev/ttySn.
1092
Linus Torvalds1da177e2005-04-16 15:20:36 -07001093config SERIAL_PMACZILOG_CONSOLE
1094 bool "Console on PowerMac z85c30 serial port"
1095 depends on SERIAL_PMACZILOG=y
1096 select SERIAL_CORE_CONSOLE
1097 help
1098 If you would like to be able to use the z85c30 serial port
1099 on your PowerMac as the console, you can do so by answering
1100 Y to this option.
1101
1102config SERIAL_LH7A40X
1103 tristate "Sharp LH7A40X embedded UART support"
1104 depends on ARM && ARCH_LH7A40X
1105 select SERIAL_CORE
1106 help
1107 This enables support for the three on-board UARTs of the
1108 Sharp LH7A40X series CPUs. Choose Y or M.
1109
1110config SERIAL_LH7A40X_CONSOLE
1111 bool "Support for console on Sharp LH7A40X serial port"
1112 depends on SERIAL_LH7A40X=y
1113 select SERIAL_CORE_CONSOLE
1114 help
1115 Say Y here if you wish to use one of the serial ports as the
1116 system console--the system console is the device which
1117 receives all kernel messages and warnings and which allows
1118 logins in single user mode.
1119
1120 Even if you say Y here, the currently visible framebuffer console
1121 (/dev/tty0) will still be used as the default system console, but
1122 you can alter that using a kernel command line, for example
1123 "console=ttyAM1".
1124
1125config SERIAL_CPM
1126 tristate "CPM SCC/SMC serial port support"
1127 depends on CPM2 || 8xx
1128 select SERIAL_CORE
1129 help
1130 This driver supports the SCC and SMC serial ports on Motorola
1131 embedded PowerPC that contain a CPM1 (8xx) or CPM2 (8xxx)
1132
1133config SERIAL_CPM_CONSOLE
1134 bool "Support for console on CPM SCC/SMC serial port"
1135 depends on SERIAL_CPM=y
1136 select SERIAL_CORE_CONSOLE
1137 help
1138 Say Y here if you wish to use a SCC or SMC CPM UART as the system
1139 console (the system console is the device which receives all kernel
1140 messages and warnings and which allows logins in single user mode).
1141
1142 Even if you say Y here, the currently visible framebuffer console
1143 (/dev/tty0) will still be used as the system console by default, but
1144 you can alter that using a kernel command line option such as
1145 "console=ttyCPM0". (Try "man bootparam" or see the documentation of
1146 your boot loader (lilo or loadlin) about how to pass options to the
1147 kernel at boot time.)
1148
Linus Torvalds1da177e2005-04-16 15:20:36 -07001149config SERIAL_SGI_L1_CONSOLE
1150 bool "SGI Altix L1 serial console support"
1151 depends on IA64_GENERIC || IA64_SGI_SN2
1152 select SERIAL_CORE
1153 select SERIAL_CORE_CONSOLE
1154 help
1155 If you have an SGI Altix and you would like to use the system
1156 controller serial port as your console (you want this!),
1157 say Y. Otherwise, say N.
1158
1159config SERIAL_MPC52xx
John Rigby25ae3a02008-01-29 04:28:56 +11001160 tristate "Freescale MPC52xx/MPC512x family PSC serial support"
1161 depends on PPC_MPC52xx || PPC_MPC512x
Linus Torvalds1da177e2005-04-16 15:20:36 -07001162 select SERIAL_CORE
1163 help
John Rigby25ae3a02008-01-29 04:28:56 +11001164 This driver supports MPC52xx and MPC512x PSC serial ports. If you would
1165 like to use them, you must answer Y or M to this option. Note that
Linus Torvalds1da177e2005-04-16 15:20:36 -07001166 for use as console, it must be included in kernel and not as a
1167 module.
1168
1169config SERIAL_MPC52xx_CONSOLE
John Rigby25ae3a02008-01-29 04:28:56 +11001170 bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001171 depends on SERIAL_MPC52xx=y
1172 select SERIAL_CORE_CONSOLE
1173 help
1174 Select this options if you'd like to use one of the PSC serial port
1175 of the Freescale MPC52xx family as a console.
1176
1177config SERIAL_MPC52xx_CONSOLE_BAUD
John Rigby25ae3a02008-01-29 04:28:56 +11001178 int "Freescale MPC52xx/MPC512x family PSC serial port baud"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001179 depends on SERIAL_MPC52xx_CONSOLE=y
1180 default "9600"
1181 help
1182 Select the MPC52xx console baud rate.
1183 This value is only used if the bootloader doesn't pass in the
1184 console baudrate
1185
1186config SERIAL_ICOM
1187 tristate "IBM Multiport Serial Adapter"
Stephen Rothwell145d01e2005-06-21 17:15:52 -07001188 depends on PCI && (PPC_ISERIES || PPC_PSERIES)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001189 select SERIAL_CORE
maximilian attemscb2fc532006-03-25 17:44:20 +00001190 select FW_LOADER
Linus Torvalds1da177e2005-04-16 15:20:36 -07001191 help
1192 This driver is for a family of multiport serial adapters
1193 including 2 port RVX, 2 port internal modem, 4 port internal
1194 modem and a split 1 port RVX and 1 port internal modem.
1195
1196 This driver can also be built as a module. If so, the module
1197 will be called icom.
1198
1199config SERIAL_M32R_SIO
1200 bool "M32R SIO I/F"
1201 depends on M32R
1202 default y
1203 select SERIAL_CORE
1204 help
1205 Say Y here if you want to use the M32R serial controller.
1206
1207config SERIAL_M32R_SIO_CONSOLE
1208 bool "use SIO console"
1209 depends on SERIAL_M32R_SIO=y
1210 select SERIAL_CORE_CONSOLE
1211 help
1212 Say Y here if you want to support a serial console.
1213
1214 If you use an M3T-M32700UT or an OPSPUT platform,
1215 please say also y for SERIAL_M32R_PLDSIO.
1216
1217config SERIAL_M32R_PLDSIO
1218 bool "M32R SIO I/F on a PLD"
Adrian Bunkd600b972006-01-13 21:57:22 +00001219 depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PLAT_USRV || PLAT_M32700UT)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001220 default n
1221 help
1222 Say Y here if you want to use the M32R serial controller
1223 on a PLD (Programmable Logic Device).
1224
1225 If you use an M3T-M32700UT or an OPSPUT platform,
1226 please say Y.
1227
1228config SERIAL_TXX9
1229 bool "TMPTX39XX/49XX SIO support"
Robert P. J. Daybef1f402006-12-12 20:04:19 +01001230 depends on HAS_TXX9_SERIAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001231 select SERIAL_CORE
1232 default y
1233
1234config HAS_TXX9_SERIAL
1235 bool
1236
Atsushi Nemoto138c5d22007-02-10 01:45:05 -08001237config SERIAL_TXX9_NR_UARTS
1238 int "Maximum number of TMPTX39XX/49XX SIO ports"
1239 depends on SERIAL_TXX9
1240 default "6"
1241
Linus Torvalds1da177e2005-04-16 15:20:36 -07001242config SERIAL_TXX9_CONSOLE
1243 bool "TMPTX39XX/49XX SIO Console support"
1244 depends on SERIAL_TXX9=y
1245 select SERIAL_CORE_CONSOLE
1246
1247config SERIAL_TXX9_STDSERIAL
1248 bool "TX39XX/49XX SIO act as standard serial"
1249 depends on !SERIAL_8250 && SERIAL_TXX9
1250
1251config SERIAL_VR41XX
1252 tristate "NEC VR4100 series Serial Interface Unit support"
1253 depends on CPU_VR41XX
1254 select SERIAL_CORE
1255 help
1256 If you have a NEC VR4100 series processor and you want to use
1257 Serial Interface Unit(SIU) or Debug Serial Interface Unit(DSIU)
1258 (not include VR4111/VR4121 DSIU), say Y. Otherwise, say N.
1259
1260config SERIAL_VR41XX_CONSOLE
1261 bool "Enable NEC VR4100 series Serial Interface Unit console"
Yoichi Yuasa21740412007-07-31 00:38:56 -07001262 depends on SERIAL_VR41XX=y
Linus Torvalds1da177e2005-04-16 15:20:36 -07001263 select SERIAL_CORE_CONSOLE
1264 help
1265 If you have a NEC VR4100 series processor and you want to use
1266 a console on a serial port, say Y. Otherwise, say N.
1267
1268config SERIAL_JSM
V. Ananda Krishnan0a577ce2006-02-03 03:04:30 -08001269 tristate "Digi International NEO PCI Support"
1270 depends on PCI
1271 select SERIAL_CORE
1272 help
1273 This is a driver for Digi International's Neo series
1274 of cards which provide multiple serial ports. You would need
1275 something like this to connect more than two modems to your Linux
1276 box, for instance in order to become a dial-in server. This driver
1277 supports PCI boards only.
Arthur Othienoa5f1e4e2006-02-15 09:52:46 +00001278
1279 If you have a card like this, say Y here, otherwise say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001280
V. Ananda Krishnan0a577ce2006-02-03 03:04:30 -08001281 To compile this driver as a module, choose M here: the
1282 module will be called jsm.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001283
Brent Casavante5d310b2005-06-21 17:16:01 -07001284config SERIAL_SGI_IOC4
1285 tristate "SGI IOC4 controller serial support"
1286 depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC4
1287 select SERIAL_CORE
1288 help
1289 If you have an SGI Altix with an IOC4 based Base IO card
1290 and wish to use the serial ports on this card, say Y.
1291 Otherwise, say N.
1292
Patrick Gefre2d0cfb52006-01-14 13:20:40 -08001293config SERIAL_SGI_IOC3
1294 tristate "SGI Altix IOC3 serial support"
1295 depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC3
1296 select SERIAL_CORE
1297 help
1298 If you have an SGI Altix with an IOC3 serial card,
1299 say Y or M. Otherwise, say N.
1300
Sascha Hauerf8441e12006-06-19 13:29:07 +01001301config SERIAL_NETX
Paul Bollefb881f72008-10-14 18:13:45 +02001302 tristate "NetX serial port support"
Sascha Hauerf8441e12006-06-19 13:29:07 +01001303 depends on ARM && ARCH_NETX
1304 select SERIAL_CORE
1305 help
1306 If you have a machine based on a Hilscher NetX SoC you
1307 can enable its onboard serial port by enabling this option.
1308
1309 To compile this driver as a module, choose M here: the
1310 module will be called netx-serial.
1311
1312config SERIAL_NETX_CONSOLE
1313 bool "Console on NetX serial port"
Paul Bollefb881f72008-10-14 18:13:45 +02001314 depends on SERIAL_NETX=y
Sascha Hauerf8441e12006-06-19 13:29:07 +01001315 select SERIAL_CORE_CONSOLE
1316 help
Uwe Kleine-Königb885b272008-02-03 14:55:57 +02001317 If you have enabled the serial port on the Hilscher NetX SoC
1318 you can make it the console by answering Y to this option.
Sascha Hauerf8441e12006-06-19 13:29:07 +01001319
Arnd Bergmann8d38a5b2007-02-13 21:35:38 +01001320config SERIAL_OF_PLATFORM
1321 tristate "Serial port on Open Firmware platform bus"
1322 depends on PPC_OF
Benjamin Krill5886188d2009-01-07 10:32:38 +01001323 depends on SERIAL_8250 || SERIAL_OF_PLATFORM_NWPSERIAL
Arnd Bergmann8d38a5b2007-02-13 21:35:38 +01001324 help
1325 If you have a PowerPC based system that has serial ports
1326 on a platform specific bus, you should enable this option.
1327 Currently, only 8250 compatible ports are supported, but
1328 others can easily be added.
1329
Benjamin Krill5886188d2009-01-07 10:32:38 +01001330config SERIAL_OF_PLATFORM_NWPSERIAL
1331 tristate "NWP serial port driver"
1332 depends on PPC_OF && PPC_DCR
1333 select SERIAL_OF_PLATFORM
1334 select SERIAL_CORE_CONSOLE
1335 select SERIAL_CORE
1336 help
1337 This driver supports the cell network processor nwp serial
1338 device.
1339
1340config SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE
1341 bool "Console on NWP serial port"
1342 depends on SERIAL_OF_PLATFORM_NWPSERIAL=y
1343 select SERIAL_CORE_CONSOLE
1344 help
1345 Support for Console on the NWP serial ports.
1346
Timur Tabid7584ed2008-01-15 09:56:13 -06001347config SERIAL_QE
1348 tristate "Freescale QUICC Engine serial port support"
1349 depends on QUICC_ENGINE
1350 select SERIAL_CORE
1351 select FW_LOADER
1352 default n
1353 help
1354 This driver supports the QE serial ports on Freescale embedded
1355 PowerPC that contain a QUICC Engine.
1356
Thomas Bogendoerfereea63e02008-02-06 01:37:27 -08001357config SERIAL_SC26XX
1358 tristate "SC2681/SC2692 serial port support"
1359 depends on SNI_RM
1360 select SERIAL_CORE
1361 help
1362 This is a driver for the onboard serial ports of
1363 older RM400 machines.
1364
1365config SERIAL_SC26XX_CONSOLE
1366 bool "Console on SC2681/SC2692 serial port"
1367 depends on SERIAL_SC26XX
1368 select SERIAL_CORE_CONSOLE
1369 help
1370 Support for Console on SC2681/SC2692 serial ports.
1371
Bryan Wu2f351742008-04-30 00:52:12 -07001372config SERIAL_BFIN_SPORT
1373 tristate "Blackfin SPORT emulate UART (EXPERIMENTAL)"
Mike Frysinger460ed2e2008-05-17 18:22:26 +08001374 depends on BLACKFIN && EXPERIMENTAL
Bryan Wu2f351742008-04-30 00:52:12 -07001375 select SERIAL_CORE
1376 help
Matt LaPlante692105b2009-01-26 11:12:25 +01001377 Enable SPORT emulate UART on Blackfin series.
Bryan Wu2f351742008-04-30 00:52:12 -07001378
1379 To compile this driver as a module, choose M here: the
1380 module will be called bfin_sport_uart.
1381
1382choice
1383 prompt "Baud rate for Blackfin SPORT UART"
1384 depends on SERIAL_BFIN_SPORT
1385 default SERIAL_SPORT_BAUD_RATE_57600
1386 help
1387 Choose a baud rate for the SPORT UART, other uart settings are
1388 8 bit, 1 stop bit, no parity, no flow control.
1389
1390config SERIAL_SPORT_BAUD_RATE_115200
1391 bool "115200"
1392
1393config SERIAL_SPORT_BAUD_RATE_57600
1394 bool "57600"
1395
1396config SERIAL_SPORT_BAUD_RATE_38400
1397 bool "38400"
1398
1399config SERIAL_SPORT_BAUD_RATE_19200
1400 bool "19200"
1401
1402config SERIAL_SPORT_BAUD_RATE_9600
1403 bool "9600"
1404endchoice
1405
1406config SPORT_BAUD_RATE
1407 int
1408 depends on SERIAL_BFIN_SPORT
1409 default 115200 if (SERIAL_SPORT_BAUD_RATE_115200)
1410 default 57600 if (SERIAL_SPORT_BAUD_RATE_57600)
1411 default 38400 if (SERIAL_SPORT_BAUD_RATE_38400)
1412 default 19200 if (SERIAL_SPORT_BAUD_RATE_19200)
1413 default 9600 if (SERIAL_SPORT_BAUD_RATE_9600)
1414
Linus Torvalds1da177e2005-04-16 15:20:36 -07001415endmenu