blob: b3ef7d805765507260dc8735667216ef43706b97 [file] [log] [blame]
Srinivas Kandagatla1de990d2014-07-14 12:17:59 +01001/*
2 * Copyright (c) 2014, The Linux Foundation. All rights reserved.
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 and
6 * only version 2 as published by the Free Software Foundation.
7 *
8 * This program is distributed in the hope that it will be useful,
9 * but WITHOUT ANY WARRANTY; without even the implied warranty of
10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 * GNU General Public License for more details.
12 */
13
14#include <linux/io.h>
15#include <linux/kernel.h>
16#include <linux/module.h>
17#include <linux/of.h>
18#include <linux/time.h>
19#include <linux/delay.h>
20#include <linux/clk.h>
21#include <linux/slab.h>
22#include <linux/platform_device.h>
23#include <linux/phy/phy.h>
24
25/* PHY registers */
26#define UNIPHY_PLL_REFCLK_CFG 0x000
27#define UNIPHY_PLL_PWRGEN_CFG 0x014
28#define UNIPHY_PLL_GLB_CFG 0x020
29#define UNIPHY_PLL_SDM_CFG0 0x038
30#define UNIPHY_PLL_SDM_CFG1 0x03C
31#define UNIPHY_PLL_SDM_CFG2 0x040
32#define UNIPHY_PLL_SDM_CFG3 0x044
33#define UNIPHY_PLL_SDM_CFG4 0x048
34#define UNIPHY_PLL_SSC_CFG0 0x04C
35#define UNIPHY_PLL_SSC_CFG1 0x050
36#define UNIPHY_PLL_SSC_CFG2 0x054
37#define UNIPHY_PLL_SSC_CFG3 0x058
38#define UNIPHY_PLL_LKDET_CFG0 0x05C
39#define UNIPHY_PLL_LKDET_CFG1 0x060
40#define UNIPHY_PLL_LKDET_CFG2 0x064
41#define UNIPHY_PLL_CAL_CFG0 0x06C
42#define UNIPHY_PLL_CAL_CFG8 0x08C
43#define UNIPHY_PLL_CAL_CFG9 0x090
44#define UNIPHY_PLL_CAL_CFG10 0x094
45#define UNIPHY_PLL_CAL_CFG11 0x098
46#define UNIPHY_PLL_STATUS 0x0C0
47
48#define SATA_PHY_SER_CTRL 0x100
49#define SATA_PHY_TX_DRIV_CTRL0 0x104
50#define SATA_PHY_TX_DRIV_CTRL1 0x108
51#define SATA_PHY_TX_IMCAL0 0x11C
52#define SATA_PHY_TX_IMCAL2 0x124
53#define SATA_PHY_RX_IMCAL0 0x128
54#define SATA_PHY_EQUAL 0x13C
55#define SATA_PHY_OOB_TERM 0x144
56#define SATA_PHY_CDR_CTRL0 0x148
57#define SATA_PHY_CDR_CTRL1 0x14C
58#define SATA_PHY_CDR_CTRL2 0x150
59#define SATA_PHY_CDR_CTRL3 0x154
60#define SATA_PHY_PI_CTRL0 0x168
61#define SATA_PHY_POW_DWN_CTRL0 0x180
62#define SATA_PHY_POW_DWN_CTRL1 0x184
63#define SATA_PHY_TX_DATA_CTRL 0x188
64#define SATA_PHY_ALIGNP 0x1A4
65#define SATA_PHY_TX_IMCAL_STAT 0x1E4
66#define SATA_PHY_RX_IMCAL_STAT 0x1E8
67
68#define UNIPHY_PLL_LOCK BIT(0)
69#define SATA_PHY_TX_CAL BIT(0)
70#define SATA_PHY_RX_CAL BIT(0)
71
72/* default timeout set to 1 sec */
73#define TIMEOUT_MS 10000
74#define DELAY_INTERVAL_US 100
75
76struct qcom_apq8064_sata_phy {
77 void __iomem *mmio;
78 struct clk *cfg_clk;
79 struct device *dev;
80};
81
82/* Helper function to do poll and timeout */
83static int read_poll_timeout(void __iomem *addr, u32 mask)
84{
85 unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS);
86
87 do {
88 if (readl_relaxed(addr) & mask)
89 return 0;
90
91 usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50);
92 } while (!time_after(jiffies, timeout));
93
Srinivas Kandagatla175f02e2014-07-16 09:18:43 +010094 return (readl_relaxed(addr) & mask) ? 0 : -ETIMEDOUT;
Srinivas Kandagatla1de990d2014-07-14 12:17:59 +010095}
96
97static int qcom_apq8064_sata_phy_init(struct phy *generic_phy)
98{
99 struct qcom_apq8064_sata_phy *phy = phy_get_drvdata(generic_phy);
100 void __iomem *base = phy->mmio;
101 int ret = 0;
102
103 /* SATA phy initialization */
104 writel_relaxed(0x01, base + SATA_PHY_SER_CTRL);
105 writel_relaxed(0xB1, base + SATA_PHY_POW_DWN_CTRL0);
106 /* Make sure the power down happens before power up */
107 mb();
108 usleep_range(10, 60);
109
110 writel_relaxed(0x01, base + SATA_PHY_POW_DWN_CTRL0);
111 writel_relaxed(0x3E, base + SATA_PHY_POW_DWN_CTRL1);
112 writel_relaxed(0x01, base + SATA_PHY_RX_IMCAL0);
113 writel_relaxed(0x01, base + SATA_PHY_TX_IMCAL0);
114 writel_relaxed(0x02, base + SATA_PHY_TX_IMCAL2);
115
116 /* Write UNIPHYPLL registers to configure PLL */
117 writel_relaxed(0x04, base + UNIPHY_PLL_REFCLK_CFG);
118 writel_relaxed(0x00, base + UNIPHY_PLL_PWRGEN_CFG);
119
120 writel_relaxed(0x0A, base + UNIPHY_PLL_CAL_CFG0);
121 writel_relaxed(0xF3, base + UNIPHY_PLL_CAL_CFG8);
122 writel_relaxed(0x01, base + UNIPHY_PLL_CAL_CFG9);
123 writel_relaxed(0xED, base + UNIPHY_PLL_CAL_CFG10);
124 writel_relaxed(0x02, base + UNIPHY_PLL_CAL_CFG11);
125
126 writel_relaxed(0x36, base + UNIPHY_PLL_SDM_CFG0);
127 writel_relaxed(0x0D, base + UNIPHY_PLL_SDM_CFG1);
128 writel_relaxed(0xA3, base + UNIPHY_PLL_SDM_CFG2);
129 writel_relaxed(0xF0, base + UNIPHY_PLL_SDM_CFG3);
130 writel_relaxed(0x00, base + UNIPHY_PLL_SDM_CFG4);
131
132 writel_relaxed(0x19, base + UNIPHY_PLL_SSC_CFG0);
133 writel_relaxed(0xE1, base + UNIPHY_PLL_SSC_CFG1);
134 writel_relaxed(0x00, base + UNIPHY_PLL_SSC_CFG2);
135 writel_relaxed(0x11, base + UNIPHY_PLL_SSC_CFG3);
136
137 writel_relaxed(0x04, base + UNIPHY_PLL_LKDET_CFG0);
138 writel_relaxed(0xFF, base + UNIPHY_PLL_LKDET_CFG1);
139
140 writel_relaxed(0x02, base + UNIPHY_PLL_GLB_CFG);
141 /* make sure global config LDO power down happens before power up */
142 mb();
143
144 writel_relaxed(0x03, base + UNIPHY_PLL_GLB_CFG);
145 writel_relaxed(0x05, base + UNIPHY_PLL_LKDET_CFG2);
146
147 /* PLL Lock wait */
148 ret = read_poll_timeout(base + UNIPHY_PLL_STATUS, UNIPHY_PLL_LOCK);
149 if (ret) {
150 dev_err(phy->dev, "poll timeout UNIPHY_PLL_STATUS\n");
151 return ret;
152 }
153
154 /* TX Calibration */
155 ret = read_poll_timeout(base + SATA_PHY_TX_IMCAL_STAT, SATA_PHY_TX_CAL);
156 if (ret) {
157 dev_err(phy->dev, "poll timeout SATA_PHY_TX_IMCAL_STAT\n");
158 return ret;
159 }
160
161 /* RX Calibration */
162 ret = read_poll_timeout(base + SATA_PHY_RX_IMCAL_STAT, SATA_PHY_RX_CAL);
163 if (ret) {
164 dev_err(phy->dev, "poll timeout SATA_PHY_RX_IMCAL_STAT\n");
165 return ret;
166 }
167
168 /* SATA phy calibrated succesfully, power up to functional mode */
169 writel_relaxed(0x3E, base + SATA_PHY_POW_DWN_CTRL1);
170 writel_relaxed(0x01, base + SATA_PHY_RX_IMCAL0);
171 writel_relaxed(0x01, base + SATA_PHY_TX_IMCAL0);
172
173 writel_relaxed(0x00, base + SATA_PHY_POW_DWN_CTRL1);
174 writel_relaxed(0x59, base + SATA_PHY_CDR_CTRL0);
175 writel_relaxed(0x04, base + SATA_PHY_CDR_CTRL1);
176 writel_relaxed(0x00, base + SATA_PHY_CDR_CTRL2);
177 writel_relaxed(0x00, base + SATA_PHY_PI_CTRL0);
178 writel_relaxed(0x00, base + SATA_PHY_CDR_CTRL3);
179 writel_relaxed(0x01, base + SATA_PHY_POW_DWN_CTRL0);
180
181 writel_relaxed(0x11, base + SATA_PHY_TX_DATA_CTRL);
182 writel_relaxed(0x43, base + SATA_PHY_ALIGNP);
183 writel_relaxed(0x04, base + SATA_PHY_OOB_TERM);
184
185 writel_relaxed(0x01, base + SATA_PHY_EQUAL);
186 writel_relaxed(0x09, base + SATA_PHY_TX_DRIV_CTRL0);
187 writel_relaxed(0x09, base + SATA_PHY_TX_DRIV_CTRL1);
188
189 return 0;
190}
191
192static int qcom_apq8064_sata_phy_exit(struct phy *generic_phy)
193{
194 struct qcom_apq8064_sata_phy *phy = phy_get_drvdata(generic_phy);
195 void __iomem *base = phy->mmio;
196
197 /* Power down PHY */
198 writel_relaxed(0xF8, base + SATA_PHY_POW_DWN_CTRL0);
199 writel_relaxed(0xFE, base + SATA_PHY_POW_DWN_CTRL1);
200
201 /* Power down PLL block */
202 writel_relaxed(0x00, base + UNIPHY_PLL_GLB_CFG);
203
204 return 0;
205}
206
207static struct phy_ops qcom_apq8064_sata_phy_ops = {
208 .init = qcom_apq8064_sata_phy_init,
209 .exit = qcom_apq8064_sata_phy_exit,
210 .owner = THIS_MODULE,
211};
212
213static int qcom_apq8064_sata_phy_probe(struct platform_device *pdev)
214{
215 struct qcom_apq8064_sata_phy *phy;
216 struct device *dev = &pdev->dev;
217 struct resource *res;
218 struct phy_provider *phy_provider;
219 struct phy *generic_phy;
220 int ret;
221
222 phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
223 if (!phy)
224 return -ENOMEM;
225
226 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
227 phy->mmio = devm_ioremap_resource(dev, res);
228 if (IS_ERR(phy->mmio))
229 return PTR_ERR(phy->mmio);
230
Kishon Vijay Abraham If0ed8172014-07-14 15:55:02 +0530231 generic_phy = devm_phy_create(dev, NULL, &qcom_apq8064_sata_phy_ops,
232 NULL);
Srinivas Kandagatla1de990d2014-07-14 12:17:59 +0100233 if (IS_ERR(generic_phy)) {
234 dev_err(dev, "%s: failed to create phy\n", __func__);
235 return PTR_ERR(generic_phy);
236 }
237
238 phy->dev = dev;
239 phy_set_drvdata(generic_phy, phy);
240 platform_set_drvdata(pdev, phy);
241
242 phy->cfg_clk = devm_clk_get(dev, "cfg");
243 if (IS_ERR(phy->cfg_clk)) {
244 dev_err(dev, "Failed to get sata cfg clock\n");
245 return PTR_ERR(phy->cfg_clk);
246 }
247
248 ret = clk_prepare_enable(phy->cfg_clk);
249 if (ret)
250 return ret;
251
252 phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
253 if (IS_ERR(phy_provider)) {
254 clk_disable_unprepare(phy->cfg_clk);
255 dev_err(dev, "%s: failed to register phy\n", __func__);
256 return PTR_ERR(phy_provider);
257 }
258
259 return 0;
260}
261
262static int qcom_apq8064_sata_phy_remove(struct platform_device *pdev)
263{
264 struct qcom_apq8064_sata_phy *phy = platform_get_drvdata(pdev);
265
266 clk_disable_unprepare(phy->cfg_clk);
267
268 return 0;
269}
270
271static const struct of_device_id qcom_apq8064_sata_phy_of_match[] = {
272 { .compatible = "qcom,apq8064-sata-phy" },
273 { },
274};
275MODULE_DEVICE_TABLE(of, qcom_apq8064_sata_phy_of_match);
276
277static struct platform_driver qcom_apq8064_sata_phy_driver = {
278 .probe = qcom_apq8064_sata_phy_probe,
279 .remove = qcom_apq8064_sata_phy_remove,
280 .driver = {
281 .name = "qcom-apq8064-sata-phy",
282 .owner = THIS_MODULE,
283 .of_match_table = qcom_apq8064_sata_phy_of_match,
284 }
285};
286module_platform_driver(qcom_apq8064_sata_phy_driver);
287
288MODULE_DESCRIPTION("QCOM apq8064 SATA PHY driver");
289MODULE_LICENSE("GPL v2");