blob: 725a8586cd6e40744a04c5091d3a642d2f9b65ca [file] [log] [blame]
Jeff Garzik669a5db2006-08-29 18:12:40 -04001/*
2 * New ATA layer SC1200 driver Alan Cox <alan@redhat.com>
3 *
4 * TODO: Mode selection filtering
5 * TODO: Can't enable second channel until ATA core has serialize
6 * TODO: Needs custom DMA cleanup code
7 *
8 * Based very heavily on
9 *
10 * linux/drivers/ide/pci/sc1200.c Version 0.91 28-Jan-2003
11 *
12 * Copyright (C) 2000-2002 Mark Lord <mlord@pobox.com>
13 * May be copied or modified under the terms of the GNU General Public License
14 *
15 * Development of this chipset driver was funded
16 * by the nice folks at National Semiconductor.
17 *
18 * This program is free software; you can redistribute it and/or modify
19 * it under the terms of the GNU General Public License version 2 as
20 * published by the Free Software Foundation.
21 *
22 * This program is distributed in the hope that it will be useful,
23 * but WITHOUT ANY WARRANTY; without even the implied warranty of
24 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
25 * GNU General Public License for more details.
26 *
27 * You should have received a copy of the GNU General Public License
28 * along with this program; if not, write to the Free Software
29 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Jeff Garzik85cd7252006-08-31 00:03:49 -040030 *
Jeff Garzik669a5db2006-08-29 18:12:40 -040031 */
32
33#include <linux/kernel.h>
34#include <linux/module.h>
35#include <linux/pci.h>
36#include <linux/init.h>
37#include <linux/blkdev.h>
38#include <linux/delay.h>
39#include <scsi/scsi_host.h>
40#include <linux/libata.h>
41
42#define DRV_NAME "sc1200"
Jeff Garzik2a3103c2007-08-31 04:54:06 -040043#define DRV_VERSION "0.2.6"
Jeff Garzik669a5db2006-08-29 18:12:40 -040044
45#define SC1200_REV_A 0x00
46#define SC1200_REV_B1 0x01
47#define SC1200_REV_B3 0x02
48#define SC1200_REV_C1 0x03
49#define SC1200_REV_D1 0x04
50
51/**
52 * sc1200_clock - PCI clock
53 *
54 * Return the PCI bus clocking for the SC1200 chipset configuration
55 * in use. We return 0 for 33MHz 1 for 48MHz and 2 for 66Mhz
56 */
Jeff Garzik85cd7252006-08-31 00:03:49 -040057
Jeff Garzik669a5db2006-08-29 18:12:40 -040058static int sc1200_clock(void)
59{
60 /* Magic registers that give us the chipset data */
61 u8 chip_id = inb(0x903C);
62 u8 silicon_rev = inb(0x903D);
63 u16 pci_clock;
Jeff Garzik85cd7252006-08-31 00:03:49 -040064
Jeff Garzik669a5db2006-08-29 18:12:40 -040065 if (chip_id == 0x04 && silicon_rev < SC1200_REV_B1)
66 return 0; /* 33 MHz mode */
67
68 /* Clock generator configuration 0x901E its 8/9 are the PCI clocking
69 0/3 is 33Mhz 1 is 48 2 is 66 */
70
71 pci_clock = inw(0x901E);
72 pci_clock >>= 8;
73 pci_clock &= 0x03;
74 if (pci_clock == 3)
75 pci_clock = 0;
76 return pci_clock;
77}
78
79/**
80 * sc1200_set_piomode - PIO setup
81 * @ap: ATA interface
82 * @adev: device on the interface
83 *
84 * Set our PIO requirements. This is fairly simple on the SC1200
85 */
Jeff Garzik85cd7252006-08-31 00:03:49 -040086
Jeff Garzik669a5db2006-08-29 18:12:40 -040087static void sc1200_set_piomode(struct ata_port *ap, struct ata_device *adev)
88{
89 static const u32 pio_timings[4][5] = {
90 {0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010}, // format0 33Mhz
91 {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010}, // format1, 33Mhz
92 {0xfaa3f4f3, 0xc23232b2, 0x513101c1, 0x31213121, 0x10211021}, // format1, 48Mhz
93 {0xfff4fff4, 0xf35353d3, 0x814102f1, 0x42314231, 0x11311131} // format1, 66Mhz
94 };
95
96 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
97 u32 format;
98 unsigned int reg = 0x40 + 0x10 * ap->port_no;
99 int mode = adev->pio_mode - XFER_PIO_0;
Jeff Garzik85cd7252006-08-31 00:03:49 -0400100
Jeff Garzik669a5db2006-08-29 18:12:40 -0400101 pci_read_config_dword(pdev, reg + 4, &format);
102 format >>= 31;
103 format += sc1200_clock();
Jeff Garzik85cd7252006-08-31 00:03:49 -0400104 pci_write_config_dword(pdev, reg + 8 * adev->devno,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400105 pio_timings[format][mode]);
106}
107
108/**
109 * sc1200_set_dmamode - DMA timing setup
110 * @ap: ATA interface
111 * @adev: Device being configured
112 *
113 * We cannot mix MWDMA and UDMA without reloading timings each switch
114 * master to slave.
115 */
Jeff Garzik85cd7252006-08-31 00:03:49 -0400116
Jeff Garzik669a5db2006-08-29 18:12:40 -0400117static void sc1200_set_dmamode(struct ata_port *ap, struct ata_device *adev)
118{
119 static const u32 udma_timing[3][3] = {
120 { 0x00921250, 0x00911140, 0x00911030 },
121 { 0x00932470, 0x00922260, 0x00922140 },
122 { 0x009436A1, 0x00933481, 0x00923261 }
123 };
Jeff Garzik85cd7252006-08-31 00:03:49 -0400124
Jeff Garzik669a5db2006-08-29 18:12:40 -0400125 static const u32 mwdma_timing[3][3] = {
126 { 0x00077771, 0x00012121, 0x00002020 },
127 { 0x000BBBB2, 0x00024241, 0x00013131 },
128 { 0x000FFFF3, 0x00035352, 0x00015151 }
129 };
Jeff Garzik85cd7252006-08-31 00:03:49 -0400130
Jeff Garzik669a5db2006-08-29 18:12:40 -0400131 int clock = sc1200_clock();
132 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
133 unsigned int reg = 0x40 + 0x10 * ap->port_no;
134 int mode = adev->dma_mode;
135 u32 format;
136
137 if (mode >= XFER_UDMA_0)
138 format = udma_timing[clock][mode - XFER_UDMA_0];
139 else
140 format = mwdma_timing[clock][mode - XFER_MW_DMA_0];
Jeff Garzik85cd7252006-08-31 00:03:49 -0400141
Jeff Garzik669a5db2006-08-29 18:12:40 -0400142 if (adev->devno == 0) {
143 u32 timings;
Jeff Garzik85cd7252006-08-31 00:03:49 -0400144
Jeff Garzik669a5db2006-08-29 18:12:40 -0400145 pci_read_config_dword(pdev, reg + 4, &timings);
146 timings &= 0x80000000UL;
147 timings |= format;
148 pci_write_config_dword(pdev, reg + 4, timings);
149 } else
150 pci_write_config_dword(pdev, reg + 12, format);
151}
152
153/**
154 * sc1200_qc_issue_prot - command issue
155 * @qc: command pending
156 *
157 * Called when the libata layer is about to issue a command. We wrap
158 * this interface so that we can load the correct ATA timings if
Robert P. J. Day3a4fa0a2007-10-19 23:10:43 +0200159 * necessary. Specifically we have a problem that there is only
Jeff Garzik669a5db2006-08-29 18:12:40 -0400160 * one MWDMA/UDMA bit.
161 */
162
163static unsigned int sc1200_qc_issue_prot(struct ata_queued_cmd *qc)
164{
165 struct ata_port *ap = qc->ap;
166 struct ata_device *adev = qc->dev;
167 struct ata_device *prev = ap->private_data;
168
169 /* See if the DMA settings could be wrong */
170 if (adev->dma_mode != 0 && adev != prev && prev != NULL) {
171 /* Maybe, but do the channels match MWDMA/UDMA ? */
172 if ((adev->dma_mode >= XFER_UDMA_0 && prev->dma_mode < XFER_UDMA_0) ||
173 (adev->dma_mode < XFER_UDMA_0 && prev->dma_mode >= XFER_UDMA_0))
174 /* Switch the mode bits */
175 sc1200_set_dmamode(ap, adev);
176 }
177
178 return ata_qc_issue_prot(qc);
179}
180
181static struct scsi_host_template sc1200_sht = {
182 .module = THIS_MODULE,
183 .name = DRV_NAME,
184 .ioctl = ata_scsi_ioctl,
185 .queuecommand = ata_scsi_queuecmd,
186 .can_queue = ATA_DEF_QUEUE,
187 .this_id = ATA_SHT_THIS_ID,
Alan Coxd26fc952007-07-06 19:13:52 -0400188 .sg_tablesize = LIBATA_DUMB_MAX_PRD,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400189 .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
190 .emulated = ATA_SHT_EMULATED,
191 .use_clustering = ATA_SHT_USE_CLUSTERING,
192 .proc_name = DRV_NAME,
193 .dma_boundary = ATA_DMA_BOUNDARY,
194 .slave_configure = ata_scsi_slave_config,
Tejun Heoafdfe892006-11-29 11:26:47 +0900195 .slave_destroy = ata_scsi_slave_destroy,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400196 .bios_param = ata_std_bios_param,
197};
198
199static struct ata_port_operations sc1200_port_ops = {
Jeff Garzik669a5db2006-08-29 18:12:40 -0400200 .set_piomode = sc1200_set_piomode,
201 .set_dmamode = sc1200_set_dmamode,
202 .mode_filter = ata_pci_default_filter,
Jeff Garzik85cd7252006-08-31 00:03:49 -0400203
Jeff Garzik669a5db2006-08-29 18:12:40 -0400204 .tf_load = ata_tf_load,
205 .tf_read = ata_tf_read,
206 .check_status = ata_check_status,
207 .exec_command = ata_exec_command,
208 .dev_select = ata_std_dev_select,
209
Jeff Garzikbf7551c2007-03-02 18:09:05 -0500210 .freeze = ata_bmdma_freeze,
211 .thaw = ata_bmdma_thaw,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400212 .error_handler = ata_bmdma_error_handler,
Jeff Garzikbf7551c2007-03-02 18:09:05 -0500213 .post_internal_cmd = ata_bmdma_post_internal_cmd,
Alan Cox745975c2007-03-08 22:58:03 +0000214 .cable_detect = ata_cable_40wire,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400215
216 .bmdma_setup = ata_bmdma_setup,
217 .bmdma_start = ata_bmdma_start,
218 .bmdma_stop = ata_bmdma_stop,
219 .bmdma_status = ata_bmdma_status,
220
Alan Coxd26fc952007-07-06 19:13:52 -0400221 .qc_prep = ata_dumb_qc_prep,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400222 .qc_issue = sc1200_qc_issue_prot,
Jeff Garzikbda30282006-09-27 05:41:13 -0400223
Tejun Heo0d5ff562007-02-01 15:06:36 +0900224 .data_xfer = ata_data_xfer,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400225
226 .irq_handler = ata_interrupt,
227 .irq_clear = ata_bmdma_irq_clear,
Akira Iguchi246ce3b2007-01-26 16:27:58 +0900228 .irq_on = ata_irq_on,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400229
Alan Cox81ad1832007-08-22 22:55:41 +0100230 .port_start = ata_sff_port_start,
Jeff Garzik85cd7252006-08-31 00:03:49 -0400231};
Jeff Garzik669a5db2006-08-29 18:12:40 -0400232
233/**
234 * sc1200_init_one - Initialise an SC1200
235 * @dev: PCI device
236 * @id: Entry in match table
237 *
238 * Just throw the needed data at the libata helper and it does all
239 * our work.
240 */
Jeff Garzik85cd7252006-08-31 00:03:49 -0400241
Jeff Garzik669a5db2006-08-29 18:12:40 -0400242static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
243{
Tejun Heo1626aeb2007-05-04 12:43:58 +0200244 static const struct ata_port_info info = {
Jeff Garzik669a5db2006-08-29 18:12:40 -0400245 .sht = &sc1200_sht,
Jeff Garzik1d2808f2007-05-28 06:59:48 -0400246 .flags = ATA_FLAG_SLAVE_POSS,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400247 .pio_mask = 0x1f,
248 .mwdma_mask = 0x07,
249 .udma_mask = 0x07,
250 .port_ops = &sc1200_port_ops
251 };
Jeff Garzik669a5db2006-08-29 18:12:40 -0400252 /* Can't enable port 2 yet, see top comments */
Tejun Heo1626aeb2007-05-04 12:43:58 +0200253 const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
254
255 return ata_pci_init_one(dev, ppi);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400256}
257
Jeff Garzik2d2744f2006-09-28 20:21:59 -0400258static const struct pci_device_id sc1200[] = {
259 { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_SCx200_IDE), },
260
261 { },
Jeff Garzik669a5db2006-08-29 18:12:40 -0400262};
263
264static struct pci_driver sc1200_pci_driver = {
Jeff Garzik2d2744f2006-09-28 20:21:59 -0400265 .name = DRV_NAME,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400266 .id_table = sc1200,
267 .probe = sc1200_init_one,
Alan30ced0f2006-11-22 16:57:36 +0000268 .remove = ata_pci_remove_one,
Tejun Heo438ac6d2007-03-02 17:31:26 +0900269#ifdef CONFIG_PM
Alan30ced0f2006-11-22 16:57:36 +0000270 .suspend = ata_pci_device_suspend,
271 .resume = ata_pci_device_resume,
Tejun Heo438ac6d2007-03-02 17:31:26 +0900272#endif
Jeff Garzik669a5db2006-08-29 18:12:40 -0400273};
274
275static int __init sc1200_init(void)
276{
277 return pci_register_driver(&sc1200_pci_driver);
278}
279
Jeff Garzik669a5db2006-08-29 18:12:40 -0400280static void __exit sc1200_exit(void)
281{
282 pci_unregister_driver(&sc1200_pci_driver);
283}
284
Jeff Garzik669a5db2006-08-29 18:12:40 -0400285MODULE_AUTHOR("Alan Cox, Mark Lord");
286MODULE_DESCRIPTION("low-level driver for the NS/AMD SC1200");
287MODULE_LICENSE("GPL");
288MODULE_DEVICE_TABLE(pci, sc1200);
289MODULE_VERSION(DRV_VERSION);
290
291module_init(sc1200_init);
292module_exit(sc1200_exit);