blob: f25685b9b7cf51a782c24faaa86bf9b896e4acca [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * Device driver for the i2c thermostat found on the iBook G4, Albook G4
3 *
4 * Copyright (C) 2003, 2004 Colin Leroy, Rasmus Rohde, Benjamin Herrenschmidt
5 *
6 * Documentation from
7 * http://www.analog.com/UploadedFiles/Data_Sheets/115254175ADT7467_pra.pdf
8 * http://www.analog.com/UploadedFiles/Data_Sheets/3686221171167ADT7460_b.pdf
9 *
10 */
11
Linus Torvalds1da177e2005-04-16 15:20:36 -070012#include <linux/types.h>
13#include <linux/module.h>
14#include <linux/errno.h>
15#include <linux/kernel.h>
16#include <linux/delay.h>
17#include <linux/sched.h>
18#include <linux/i2c.h>
19#include <linux/slab.h>
20#include <linux/init.h>
21#include <linux/spinlock.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070022#include <linux/wait.h>
23#include <linux/suspend.h>
24#include <linux/kthread.h>
25#include <linux/moduleparam.h>
Nigel Cunningham7dfb7102006-12-06 20:34:23 -080026#include <linux/freezer.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070027
28#include <asm/prom.h>
29#include <asm/machdep.h>
30#include <asm/io.h>
31#include <asm/system.h>
32#include <asm/sections.h>
Benjamin Herrenschmidt7eebde72006-11-11 17:24:59 +110033#include <asm/of_platform.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070034
35#undef DEBUG
36
37#define CONFIG_REG 0x40
38#define MANUAL_MASK 0xe0
39#define AUTO_MASK 0x20
40
Colin Leroyd20c5072005-05-25 12:31:35 -070041static u8 TEMP_REG[3] = {0x26, 0x25, 0x27}; /* local, sensor1, sensor2 */
42static u8 LIMIT_REG[3] = {0x6b, 0x6a, 0x6c}; /* local, sensor1, sensor2 */
Linus Torvalds1da177e2005-04-16 15:20:36 -070043static u8 MANUAL_MODE[2] = {0x5c, 0x5d};
44static u8 REM_CONTROL[2] = {0x00, 0x40};
45static u8 FAN_SPEED[2] = {0x28, 0x2a};
46static u8 FAN_SPD_SET[2] = {0x30, 0x31};
47
Colin Leroyd20c5072005-05-25 12:31:35 -070048static u8 default_limits_local[3] = {70, 50, 70}; /* local, sensor1, sensor2 */
49static u8 default_limits_chip[3] = {80, 65, 80}; /* local, sensor1, sensor2 */
Olaf Hering87275852007-02-10 21:35:12 +010050static const char *sensor_location[3];
Linus Torvalds1da177e2005-04-16 15:20:36 -070051
Olaf Hering87275852007-02-10 21:35:12 +010052static int limit_adjust;
Linus Torvalds1da177e2005-04-16 15:20:36 -070053static int fan_speed = -1;
Olaf Hering87275852007-02-10 21:35:12 +010054static int verbose;
Linus Torvalds1da177e2005-04-16 15:20:36 -070055
56MODULE_AUTHOR("Colin Leroy <colin@colino.net>");
57MODULE_DESCRIPTION("Driver for ADT746x thermostat in iBook G4 and "
58 "Powerbook G4 Alu");
59MODULE_LICENSE("GPL");
60
61module_param(limit_adjust, int, 0644);
Colin Leroyd20c5072005-05-25 12:31:35 -070062MODULE_PARM_DESC(limit_adjust,"Adjust maximum temperatures (50 sensor1, 70 sensor2) "
Linus Torvalds1da177e2005-04-16 15:20:36 -070063 "by N degrees.");
64
65module_param(fan_speed, int, 0644);
66MODULE_PARM_DESC(fan_speed,"Specify starting fan speed (0-255) "
67 "(default 64)");
68
Ben Collins9f6d4b02006-01-06 00:11:40 -080069module_param(verbose, bool, 0);
70MODULE_PARM_DESC(verbose,"Verbose log operations "
71 "(default 0)");
72
Linus Torvalds1da177e2005-04-16 15:20:36 -070073struct thermostat {
74 struct i2c_client clt;
75 u8 temps[3];
76 u8 cached_temp[3];
77 u8 initial_limits[3];
78 u8 limits[3];
79 int last_speed[2];
80 int last_var[2];
81};
82
83static enum {ADT7460, ADT7467} therm_type;
84static int therm_bus, therm_address;
85static struct of_device * of_dev;
86static struct thermostat* thermostat;
87static struct task_struct *thread_therm = NULL;
88
89static int attach_one_thermostat(struct i2c_adapter *adapter, int addr,
90 int busno);
91
92static void write_both_fan_speed(struct thermostat *th, int speed);
93static void write_fan_speed(struct thermostat *th, int speed, int fan);
94
95static int
96write_reg(struct thermostat* th, int reg, u8 data)
97{
98 u8 tmp[2];
99 int rc;
100
101 tmp[0] = reg;
102 tmp[1] = data;
103 rc = i2c_master_send(&th->clt, (const char *)tmp, 2);
104 if (rc < 0)
105 return rc;
106 if (rc != 2)
107 return -ENODEV;
108 return 0;
109}
110
111static int
112read_reg(struct thermostat* th, int reg)
113{
114 u8 reg_addr, data;
115 int rc;
116
117 reg_addr = (u8)reg;
118 rc = i2c_master_send(&th->clt, &reg_addr, 1);
119 if (rc < 0)
120 return rc;
121 if (rc != 1)
122 return -ENODEV;
123 rc = i2c_master_recv(&th->clt, (char *)&data, 1);
124 if (rc < 0)
125 return rc;
126 return data;
127}
128
129static int
130attach_thermostat(struct i2c_adapter *adapter)
131{
132 unsigned long bus_no;
133
134 if (strncmp(adapter->name, "uni-n", 5))
135 return -ENODEV;
136 bus_no = simple_strtoul(adapter->name + 6, NULL, 10);
137 if (bus_no != therm_bus)
138 return -ENODEV;
139 return attach_one_thermostat(adapter, therm_address, bus_no);
140}
141
142static int
143detach_thermostat(struct i2c_adapter *adapter)
144{
145 struct thermostat* th;
146 int i;
147
148 if (thermostat == NULL)
149 return 0;
150
151 th = thermostat;
152
153 if (thread_therm != NULL) {
154 kthread_stop(thread_therm);
155 }
Ben Collins9f6d4b02006-01-06 00:11:40 -0800156
Linus Torvalds1da177e2005-04-16 15:20:36 -0700157 printk(KERN_INFO "adt746x: Putting max temperatures back from "
158 "%d, %d, %d to %d, %d, %d\n",
159 th->limits[0], th->limits[1], th->limits[2],
160 th->initial_limits[0], th->initial_limits[1],
161 th->initial_limits[2]);
Ben Collins9f6d4b02006-01-06 00:11:40 -0800162
Linus Torvalds1da177e2005-04-16 15:20:36 -0700163 for (i = 0; i < 3; i++)
164 write_reg(th, LIMIT_REG[i], th->initial_limits[i]);
165
166 write_both_fan_speed(th, -1);
167
168 i2c_detach_client(&th->clt);
169
170 thermostat = NULL;
171
172 kfree(th);
173
174 return 0;
175}
176
177static struct i2c_driver thermostat_driver = {
Laurent Riffarda33ca232005-11-26 20:40:34 +0100178 .driver = {
Laurent Riffarda33ca232005-11-26 20:40:34 +0100179 .name = "therm_adt746x",
180 },
Linus Torvalds1da177e2005-04-16 15:20:36 -0700181 .attach_adapter = attach_thermostat,
182 .detach_adapter = detach_thermostat,
183};
184
185static int read_fan_speed(struct thermostat *th, u8 addr)
186{
187 u8 tmp[2];
188 u16 res;
189
190 /* should start with low byte */
191 tmp[1] = read_reg(th, addr);
192 tmp[0] = read_reg(th, addr + 1);
193
194 res = tmp[1] + (tmp[0] << 8);
195 /* "a value of 0xffff means that the fan has stopped" */
196 return (res == 0xffff ? 0 : (90000*60)/res);
197}
198
199static void write_both_fan_speed(struct thermostat *th, int speed)
200{
201 write_fan_speed(th, speed, 0);
202 if (therm_type == ADT7460)
203 write_fan_speed(th, speed, 1);
204}
205
206static void write_fan_speed(struct thermostat *th, int speed, int fan)
207{
208 u8 manual;
209
210 if (speed > 0xff)
211 speed = 0xff;
212 else if (speed < -1)
213 speed = 0;
214
215 if (therm_type == ADT7467 && fan == 1)
216 return;
217
218 if (th->last_speed[fan] != speed) {
Ben Collins9f6d4b02006-01-06 00:11:40 -0800219 if (verbose) {
220 if (speed == -1)
221 printk(KERN_DEBUG "adt746x: Setting speed to automatic "
222 "for %s fan.\n", sensor_location[fan+1]);
223 else
224 printk(KERN_DEBUG "adt746x: Setting speed to %d "
225 "for %s fan.\n", speed, sensor_location[fan+1]);
226 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700227 } else
228 return;
229
230 if (speed >= 0) {
231 manual = read_reg(th, MANUAL_MODE[fan]);
232 write_reg(th, MANUAL_MODE[fan], manual|MANUAL_MASK);
233 write_reg(th, FAN_SPD_SET[fan], speed);
234 } else {
235 /* back to automatic */
236 if(therm_type == ADT7460) {
237 manual = read_reg(th,
238 MANUAL_MODE[fan]) & (~MANUAL_MASK);
239
240 write_reg(th,
241 MANUAL_MODE[fan], manual|REM_CONTROL[fan]);
242 } else {
243 manual = read_reg(th, MANUAL_MODE[fan]);
244 write_reg(th, MANUAL_MODE[fan], manual&(~AUTO_MASK));
245 }
246 }
247
248 th->last_speed[fan] = speed;
249}
250
251static void read_sensors(struct thermostat *th)
252{
253 int i = 0;
254
255 for (i = 0; i < 3; i++)
256 th->temps[i] = read_reg(th, TEMP_REG[i]);
257}
258
259#ifdef DEBUG
260static void display_stats(struct thermostat *th)
261{
262 if (th->temps[0] != th->cached_temp[0]
263 || th->temps[1] != th->cached_temp[1]
264 || th->temps[2] != th->cached_temp[2]) {
265 printk(KERN_INFO "adt746x: Temperature infos:"
266 " thermostats: %d,%d,%d;"
267 " limits: %d,%d,%d;"
268 " fan speed: %d RPM\n",
269 th->temps[0], th->temps[1], th->temps[2],
270 th->limits[0], th->limits[1], th->limits[2],
271 read_fan_speed(th, FAN_SPEED[0]));
272 }
273 th->cached_temp[0] = th->temps[0];
274 th->cached_temp[1] = th->temps[1];
275 th->cached_temp[2] = th->temps[2];
276}
277#endif
278
279static void update_fans_speed (struct thermostat *th)
280{
281 int lastvar = 0; /* last variation, for iBook */
282 int i = 0;
283
284 /* we don't care about local sensor, so we start at sensor 1 */
285 for (i = 1; i < 3; i++) {
286 int started = 0;
287 int fan_number = (therm_type == ADT7460 && i == 2);
288 int var = th->temps[i] - th->limits[i];
289
290 if (var > -1) {
291 int step = (255 - fan_speed) / 7;
292 int new_speed = 0;
293
294 /* hysteresis : change fan speed only if variation is
295 * more than two degrees */
296 if (abs(var - th->last_var[fan_number]) < 2)
297 continue;
298
299 started = 1;
300 new_speed = fan_speed + ((var-1)*step);
301
302 if (new_speed < fan_speed)
303 new_speed = fan_speed;
304 if (new_speed > 255)
305 new_speed = 255;
306
Ben Collins9f6d4b02006-01-06 00:11:40 -0800307 if (verbose)
308 printk(KERN_DEBUG "adt746x: Setting fans speed to %d "
309 "(limit exceeded by %d on %s) \n",
310 new_speed, var,
311 sensor_location[fan_number+1]);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700312 write_both_fan_speed(th, new_speed);
313 th->last_var[fan_number] = var;
314 } else if (var < -2) {
Colin Leroyd20c5072005-05-25 12:31:35 -0700315 /* don't stop fan if sensor2 is cold and sensor1 is not
Linus Torvalds1da177e2005-04-16 15:20:36 -0700316 * so cold (lastvar >= -1) */
317 if (i == 2 && lastvar < -1) {
318 if (th->last_speed[fan_number] != 0)
Ben Collins9f6d4b02006-01-06 00:11:40 -0800319 if (verbose)
320 printk(KERN_DEBUG "adt746x: Stopping "
321 "fans.\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700322 write_both_fan_speed(th, 0);
323 }
324 }
325
326 lastvar = var;
327
328 if (started)
329 return; /* we don't want to re-stop the fan
Colin Leroyd20c5072005-05-25 12:31:35 -0700330 * if sensor1 is heating and sensor2 is not */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700331 }
332}
333
334static int monitor_task(void *arg)
335{
336 struct thermostat* th = arg;
337
Rafael J. Wysocki83144182007-07-17 04:03:35 -0700338 set_freezable();
Linus Torvalds1da177e2005-04-16 15:20:36 -0700339 while(!kthread_should_stop()) {
Christoph Lameter3e1d1d22005-06-24 23:13:50 -0700340 try_to_freeze();
Linus Torvalds1da177e2005-04-16 15:20:36 -0700341 msleep_interruptible(2000);
342
343#ifndef DEBUG
344 if (fan_speed != -1)
345 read_sensors(th);
346#else
347 read_sensors(th);
348#endif
349
350 if (fan_speed != -1)
351 update_fans_speed(th);
352
353#ifdef DEBUG
354 display_stats(th);
355#endif
356
357 }
358
359 return 0;
360}
361
362static void set_limit(struct thermostat *th, int i)
363{
Colin Leroyd20c5072005-05-25 12:31:35 -0700364 /* Set sensor1 limit higher to avoid powerdowns */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700365 th->limits[i] = default_limits_chip[i] + limit_adjust;
366 write_reg(th, LIMIT_REG[i], th->limits[i]);
367
368 /* set our limits to normal */
369 th->limits[i] = default_limits_local[i] + limit_adjust;
370}
371
372static int attach_one_thermostat(struct i2c_adapter *adapter, int addr,
373 int busno)
374{
375 struct thermostat* th;
376 int rc;
377 int i;
378
379 if (thermostat)
380 return 0;
381
382 th = (struct thermostat *)
383 kmalloc(sizeof(struct thermostat), GFP_KERNEL);
384
385 if (!th)
386 return -ENOMEM;
387
388 memset(th, 0, sizeof(*th));
389 th->clt.addr = addr;
390 th->clt.adapter = adapter;
391 th->clt.driver = &thermostat_driver;
392 strcpy(th->clt.name, "thermostat");
393
394 rc = read_reg(th, 0);
395 if (rc < 0) {
396 printk(KERN_ERR "adt746x: Thermostat failed to read config "
397 "from bus %d !\n",
398 busno);
399 kfree(th);
400 return -ENODEV;
401 }
402
403 /* force manual control to start the fan quieter */
404 if (fan_speed == -1)
405 fan_speed = 64;
406
407 if(therm_type == ADT7460) {
408 printk(KERN_INFO "adt746x: ADT7460 initializing\n");
409 /* The 7460 needs to be started explicitly */
410 write_reg(th, CONFIG_REG, 1);
411 } else
412 printk(KERN_INFO "adt746x: ADT7467 initializing\n");
413
414 for (i = 0; i < 3; i++) {
415 th->initial_limits[i] = read_reg(th, LIMIT_REG[i]);
416 set_limit(th, i);
417 }
Ben Collins9f6d4b02006-01-06 00:11:40 -0800418
Linus Torvalds1da177e2005-04-16 15:20:36 -0700419 printk(KERN_INFO "adt746x: Lowering max temperatures from %d, %d, %d"
420 " to %d, %d, %d\n",
421 th->initial_limits[0], th->initial_limits[1],
422 th->initial_limits[2], th->limits[0], th->limits[1],
423 th->limits[2]);
424
425 thermostat = th;
426
427 if (i2c_attach_client(&th->clt)) {
428 printk(KERN_INFO "adt746x: Thermostat failed to attach "
429 "client !\n");
430 thermostat = NULL;
431 kfree(th);
432 return -ENODEV;
433 }
434
435 /* be sure to really write fan speed the first time */
436 th->last_speed[0] = -2;
437 th->last_speed[1] = -2;
438 th->last_var[0] = -80;
439 th->last_var[1] = -80;
440
441 if (fan_speed != -1) {
442 /* manual mode, stop fans */
443 write_both_fan_speed(th, 0);
444 } else {
445 /* automatic mode */
446 write_both_fan_speed(th, -1);
447 }
448
449 thread_therm = kthread_run(monitor_task, th, "kfand");
450
451 if (thread_therm == ERR_PTR(-ENOMEM)) {
452 printk(KERN_INFO "adt746x: Kthread creation failed\n");
453 thread_therm = NULL;
454 return -ENOMEM;
455 }
456
457 return 0;
458}
459
460/*
461 * Now, unfortunately, sysfs doesn't give us a nice void * we could
462 * pass around to the attribute functions, so we don't really have
463 * choice but implement a bunch of them...
464 *
Yani Ioannoue404e272005-05-17 06:42:58 -0400465 * FIXME, it does now...
Linus Torvalds1da177e2005-04-16 15:20:36 -0700466 */
467#define BUILD_SHOW_FUNC_INT(name, data) \
Yani Ioannoue404e272005-05-17 06:42:58 -0400468static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700469{ \
470 return sprintf(buf, "%d\n", data); \
471}
472
Colin Leroyd20c5072005-05-25 12:31:35 -0700473#define BUILD_SHOW_FUNC_STR(name, data) \
Yani Ioannoue404e272005-05-17 06:42:58 -0400474static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf) \
Colin Leroyd20c5072005-05-25 12:31:35 -0700475{ \
476 return sprintf(buf, "%s\n", data); \
477}
478
Linus Torvalds1da177e2005-04-16 15:20:36 -0700479#define BUILD_SHOW_FUNC_FAN(name, data) \
Yani Ioannoue404e272005-05-17 06:42:58 -0400480static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700481{ \
482 return sprintf(buf, "%d (%d rpm)\n", \
483 thermostat->last_speed[data], \
484 read_fan_speed(thermostat, FAN_SPEED[data]) \
485 ); \
486}
487
488#define BUILD_STORE_FUNC_DEG(name, data) \
Yani Ioannoue404e272005-05-17 06:42:58 -0400489static ssize_t store_##name(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700490{ \
491 int val; \
492 int i; \
493 val = simple_strtol(buf, NULL, 10); \
Colin Leroyd20c5072005-05-25 12:31:35 -0700494 printk(KERN_INFO "Adjusting limits by %d degrees\n", val); \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700495 limit_adjust = val; \
496 for (i=0; i < 3; i++) \
497 set_limit(thermostat, i); \
498 return n; \
499}
500
501#define BUILD_STORE_FUNC_INT(name, data) \
Yani Ioannoue404e272005-05-17 06:42:58 -0400502static ssize_t store_##name(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700503{ \
504 u32 val; \
505 val = simple_strtoul(buf, NULL, 10); \
506 if (val < 0 || val > 255) \
507 return -EINVAL; \
508 printk(KERN_INFO "Setting specified fan speed to %d\n", val); \
509 data = val; \
510 return n; \
511}
512
Colin Leroyd20c5072005-05-25 12:31:35 -0700513BUILD_SHOW_FUNC_INT(sensor1_temperature, (read_reg(thermostat, TEMP_REG[1])))
514BUILD_SHOW_FUNC_INT(sensor2_temperature, (read_reg(thermostat, TEMP_REG[2])))
515BUILD_SHOW_FUNC_INT(sensor1_limit, thermostat->limits[1])
516BUILD_SHOW_FUNC_INT(sensor2_limit, thermostat->limits[2])
517BUILD_SHOW_FUNC_STR(sensor1_location, sensor_location[1])
518BUILD_SHOW_FUNC_STR(sensor2_location, sensor_location[2])
Linus Torvalds1da177e2005-04-16 15:20:36 -0700519
520BUILD_SHOW_FUNC_INT(specified_fan_speed, fan_speed)
Colin Leroyd20c5072005-05-25 12:31:35 -0700521BUILD_SHOW_FUNC_FAN(sensor1_fan_speed, 0)
522BUILD_SHOW_FUNC_FAN(sensor2_fan_speed, 1)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700523
524BUILD_STORE_FUNC_INT(specified_fan_speed,fan_speed)
525BUILD_SHOW_FUNC_INT(limit_adjust, limit_adjust)
526BUILD_STORE_FUNC_DEG(limit_adjust, thermostat)
527
Colin Leroyd20c5072005-05-25 12:31:35 -0700528static DEVICE_ATTR(sensor1_temperature, S_IRUGO,
529 show_sensor1_temperature,NULL);
530static DEVICE_ATTR(sensor2_temperature, S_IRUGO,
531 show_sensor2_temperature,NULL);
532static DEVICE_ATTR(sensor1_limit, S_IRUGO,
533 show_sensor1_limit, NULL);
534static DEVICE_ATTR(sensor2_limit, S_IRUGO,
535 show_sensor2_limit, NULL);
536static DEVICE_ATTR(sensor1_location, S_IRUGO,
537 show_sensor1_location, NULL);
538static DEVICE_ATTR(sensor2_location, S_IRUGO,
539 show_sensor2_location, NULL);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700540
541static DEVICE_ATTR(specified_fan_speed, S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH,
542 show_specified_fan_speed,store_specified_fan_speed);
543
Colin Leroyd20c5072005-05-25 12:31:35 -0700544static DEVICE_ATTR(sensor1_fan_speed, S_IRUGO,
545 show_sensor1_fan_speed, NULL);
546static DEVICE_ATTR(sensor2_fan_speed, S_IRUGO,
547 show_sensor2_fan_speed, NULL);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700548
549static DEVICE_ATTR(limit_adjust, S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH,
550 show_limit_adjust, store_limit_adjust);
551
552
553static int __init
554thermostat_init(void)
555{
556 struct device_node* np;
Jeremy Kerr018a3d12006-07-12 15:40:29 +1000557 const u32 *prop;
Colin Leroyd20c5072005-05-25 12:31:35 -0700558 int i = 0, offset = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700559
560 np = of_find_node_by_name(NULL, "fan");
561 if (!np)
562 return -ENODEV;
Stephen Rothwell55b61fe2007-05-03 17:26:52 +1000563 if (of_device_is_compatible(np, "adt7460"))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700564 therm_type = ADT7460;
Stephen Rothwell55b61fe2007-05-03 17:26:52 +1000565 else if (of_device_is_compatible(np, "adt7467"))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700566 therm_type = ADT7467;
567 else
568 return -ENODEV;
569
Stephen Rothwell01b27262007-04-27 13:41:15 +1000570 prop = of_get_property(np, "hwsensor-params-version", NULL);
Colin Leroya8bacec2005-05-25 12:31:34 -0700571 printk(KERN_INFO "adt746x: version %d (%ssupported)\n", *prop,
572 (*prop == 1)?"":"un");
573 if (*prop != 1)
574 return -ENODEV;
575
Stephen Rothwell01b27262007-04-27 13:41:15 +1000576 prop = of_get_property(np, "reg", NULL);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700577 if (!prop)
578 return -ENODEV;
579
580 /* look for bus either by path or using "reg" */
581 if (strstr(np->full_name, "/i2c-bus@") != NULL) {
582 const char *tmp_bus = (strstr(np->full_name, "/i2c-bus@") + 9);
583 therm_bus = tmp_bus[0]-'0';
584 } else {
585 therm_bus = ((*prop) >> 8) & 0x0f;
586 }
587
588 therm_address = ((*prop) & 0xff) >> 1;
589
590 printk(KERN_INFO "adt746x: Thermostat bus: %d, address: 0x%02x, "
591 "limit_adjust: %d, fan_speed: %d\n",
592 therm_bus, therm_address, limit_adjust, fan_speed);
593
Stephen Rothwell01b27262007-04-27 13:41:15 +1000594 if (of_get_property(np, "hwsensor-location", NULL)) {
Colin Leroyd20c5072005-05-25 12:31:35 -0700595 for (i = 0; i < 3; i++) {
Stephen Rothwell01b27262007-04-27 13:41:15 +1000596 sensor_location[i] = of_get_property(np,
Colin Leroyd20c5072005-05-25 12:31:35 -0700597 "hwsensor-location", NULL) + offset;
598
599 if (sensor_location[i] == NULL)
600 sensor_location[i] = "";
601
602 printk(KERN_INFO "sensor %d: %s\n", i, sensor_location[i]);
603 offset += strlen(sensor_location[i]) + 1;
604 }
605 } else {
606 sensor_location[0] = "?";
607 sensor_location[1] = "?";
608 sensor_location[2] = "?";
609 }
610
Benjamin Herrenschmidt0365ba72005-09-22 21:44:06 -0700611 of_dev = of_platform_device_create(np, "temperatures", NULL);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700612
613 if (of_dev == NULL) {
614 printk(KERN_ERR "Can't register temperatures device !\n");
615 return -ENODEV;
616 }
617
Colin Leroyd20c5072005-05-25 12:31:35 -0700618 device_create_file(&of_dev->dev, &dev_attr_sensor1_temperature);
619 device_create_file(&of_dev->dev, &dev_attr_sensor2_temperature);
620 device_create_file(&of_dev->dev, &dev_attr_sensor1_limit);
621 device_create_file(&of_dev->dev, &dev_attr_sensor2_limit);
622 device_create_file(&of_dev->dev, &dev_attr_sensor1_location);
623 device_create_file(&of_dev->dev, &dev_attr_sensor2_location);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700624 device_create_file(&of_dev->dev, &dev_attr_limit_adjust);
625 device_create_file(&of_dev->dev, &dev_attr_specified_fan_speed);
Colin Leroyd20c5072005-05-25 12:31:35 -0700626 device_create_file(&of_dev->dev, &dev_attr_sensor1_fan_speed);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700627 if(therm_type == ADT7460)
Colin Leroyd20c5072005-05-25 12:31:35 -0700628 device_create_file(&of_dev->dev, &dev_attr_sensor2_fan_speed);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700629
Benjamin Herrenschmidt4d6c5882006-04-21 15:04:22 +1000630#ifndef CONFIG_I2C_POWERMAC
631 request_module("i2c-powermac");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700632#endif
633
634 return i2c_add_driver(&thermostat_driver);
635}
636
637static void __exit
638thermostat_exit(void)
639{
640 if (of_dev) {
Colin Leroyd20c5072005-05-25 12:31:35 -0700641 device_remove_file(&of_dev->dev, &dev_attr_sensor1_temperature);
642 device_remove_file(&of_dev->dev, &dev_attr_sensor2_temperature);
643 device_remove_file(&of_dev->dev, &dev_attr_sensor1_limit);
644 device_remove_file(&of_dev->dev, &dev_attr_sensor2_limit);
645 device_remove_file(&of_dev->dev, &dev_attr_sensor1_location);
646 device_remove_file(&of_dev->dev, &dev_attr_sensor2_location);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700647 device_remove_file(&of_dev->dev, &dev_attr_limit_adjust);
648 device_remove_file(&of_dev->dev, &dev_attr_specified_fan_speed);
Colin Leroyd20c5072005-05-25 12:31:35 -0700649 device_remove_file(&of_dev->dev, &dev_attr_sensor1_fan_speed);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700650
651 if(therm_type == ADT7460)
652 device_remove_file(&of_dev->dev,
Colin Leroyd20c5072005-05-25 12:31:35 -0700653 &dev_attr_sensor2_fan_speed);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700654
655 of_device_unregister(of_dev);
656 }
657 i2c_del_driver(&thermostat_driver);
658}
659
660module_init(thermostat_init);
661module_exit(thermostat_exit);