Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1 | /* |
| 2 | * MUSB OTG driver core code |
| 3 | * |
| 4 | * Copyright 2005 Mentor Graphics Corporation |
| 5 | * Copyright (C) 2005-2006 by Texas Instruments |
| 6 | * Copyright (C) 2006-2007 Nokia Corporation |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or |
| 9 | * modify it under the terms of the GNU General Public License |
| 10 | * version 2 as published by the Free Software Foundation. |
| 11 | * |
| 12 | * This program is distributed in the hope that it will be useful, but |
| 13 | * WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 15 | * General Public License for more details. |
| 16 | * |
| 17 | * You should have received a copy of the GNU General Public License |
| 18 | * along with this program; if not, write to the Free Software |
| 19 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| 20 | * 02110-1301 USA |
| 21 | * |
| 22 | * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED |
| 23 | * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| 24 | * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN |
| 25 | * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT, |
| 26 | * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| 27 | * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF |
| 28 | * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| 29 | * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| 30 | * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| 31 | * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| 32 | * |
| 33 | */ |
| 34 | |
| 35 | /* |
| 36 | * Inventra (Multipoint) Dual-Role Controller Driver for Linux. |
| 37 | * |
| 38 | * This consists of a Host Controller Driver (HCD) and a peripheral |
| 39 | * controller driver implementing the "Gadget" API; OTG support is |
| 40 | * in the works. These are normal Linux-USB controller drivers which |
| 41 | * use IRQs and have no dedicated thread. |
| 42 | * |
| 43 | * This version of the driver has only been used with products from |
| 44 | * Texas Instruments. Those products integrate the Inventra logic |
| 45 | * with other DMA, IRQ, and bus modules, as well as other logic that |
| 46 | * needs to be reflected in this driver. |
| 47 | * |
| 48 | * |
| 49 | * NOTE: the original Mentor code here was pretty much a collection |
| 50 | * of mechanisms that don't seem to have been fully integrated/working |
| 51 | * for *any* Linux kernel version. This version aims at Linux 2.6.now, |
| 52 | * Key open issues include: |
| 53 | * |
| 54 | * - Lack of host-side transaction scheduling, for all transfer types. |
| 55 | * The hardware doesn't do it; instead, software must. |
| 56 | * |
| 57 | * This is not an issue for OTG devices that don't support external |
| 58 | * hubs, but for more "normal" USB hosts it's a user issue that the |
| 59 | * "multipoint" support doesn't scale in the expected ways. That |
| 60 | * includes DaVinci EVM in a common non-OTG mode. |
| 61 | * |
| 62 | * * Control and bulk use dedicated endpoints, and there's as |
| 63 | * yet no mechanism to either (a) reclaim the hardware when |
| 64 | * peripherals are NAKing, which gets complicated with bulk |
| 65 | * endpoints, or (b) use more than a single bulk endpoint in |
| 66 | * each direction. |
| 67 | * |
| 68 | * RESULT: one device may be perceived as blocking another one. |
| 69 | * |
| 70 | * * Interrupt and isochronous will dynamically allocate endpoint |
| 71 | * hardware, but (a) there's no record keeping for bandwidth; |
| 72 | * (b) in the common case that few endpoints are available, there |
| 73 | * is no mechanism to reuse endpoints to talk to multiple devices. |
| 74 | * |
| 75 | * RESULT: At one extreme, bandwidth can be overcommitted in |
| 76 | * some hardware configurations, no faults will be reported. |
| 77 | * At the other extreme, the bandwidth capabilities which do |
| 78 | * exist tend to be severely undercommitted. You can't yet hook |
| 79 | * up both a keyboard and a mouse to an external USB hub. |
| 80 | */ |
| 81 | |
| 82 | /* |
| 83 | * This gets many kinds of configuration information: |
| 84 | * - Kconfig for everything user-configurable |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 85 | * - platform_device for addressing, irq, and platform_data |
| 86 | * - platform_data is mostly for board-specific informarion |
David Brownell | c767c1c | 2008-09-11 11:53:23 +0300 | [diff] [blame] | 87 | * (plus recentrly, SOC or family details) |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 88 | * |
| 89 | * Most of the conditional compilation will (someday) vanish. |
| 90 | */ |
| 91 | |
| 92 | #include <linux/module.h> |
| 93 | #include <linux/kernel.h> |
| 94 | #include <linux/sched.h> |
| 95 | #include <linux/slab.h> |
| 96 | #include <linux/init.h> |
| 97 | #include <linux/list.h> |
| 98 | #include <linux/kobject.h> |
Mike Frysinger | 9303961 | 2011-05-25 08:13:24 -0400 | [diff] [blame] | 99 | #include <linux/prefetch.h> |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 100 | #include <linux/platform_device.h> |
| 101 | #include <linux/io.h> |
B, Ravi | 65b3d52 | 2012-08-31 11:09:49 +0000 | [diff] [blame] | 102 | #include <linux/idr.h> |
Ajay Kumar Gupta | 8d2421e | 2012-08-31 11:09:50 +0000 | [diff] [blame] | 103 | #include <linux/dma-mapping.h> |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 104 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 105 | #include "musb_core.h" |
| 106 | |
David Brownell | f7f9d63 | 2009-03-31 12:32:12 -0700 | [diff] [blame] | 107 | #define TA_WAIT_BCON(m) max_t(int, (m)->a_wait_bcon, OTG_TIME_A_WAIT_BCON) |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 108 | |
| 109 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 110 | #define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia" |
| 111 | #define DRIVER_DESC "Inventra Dual-Role USB Controller Driver" |
| 112 | |
Felipe Balbi | e8164f6 | 2008-08-10 21:22:35 +0300 | [diff] [blame] | 113 | #define MUSB_VERSION "6.0" |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 114 | |
| 115 | #define DRIVER_INFO DRIVER_DESC ", v" MUSB_VERSION |
| 116 | |
Felipe Balbi | 05ac10d | 2010-12-02 08:49:26 +0200 | [diff] [blame] | 117 | #define MUSB_DRIVER_NAME "musb-hdrc" |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 118 | const char musb_driver_name[] = MUSB_DRIVER_NAME; |
| 119 | |
| 120 | MODULE_DESCRIPTION(DRIVER_INFO); |
| 121 | MODULE_AUTHOR(DRIVER_AUTHOR); |
| 122 | MODULE_LICENSE("GPL"); |
| 123 | MODULE_ALIAS("platform:" MUSB_DRIVER_NAME); |
| 124 | |
| 125 | |
| 126 | /*-------------------------------------------------------------------------*/ |
| 127 | |
| 128 | static inline struct musb *dev_to_musb(struct device *dev) |
| 129 | { |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 130 | return dev_get_drvdata(dev); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 131 | } |
| 132 | |
| 133 | /*-------------------------------------------------------------------------*/ |
| 134 | |
Heikki Krogerus | ffb865b | 2010-03-25 13:25:28 +0200 | [diff] [blame] | 135 | #ifndef CONFIG_BLACKFIN |
Heikki Krogerus | b96d3b0 | 2012-02-13 13:24:18 +0200 | [diff] [blame] | 136 | static int musb_ulpi_read(struct usb_phy *phy, u32 offset) |
Heikki Krogerus | ffb865b | 2010-03-25 13:25:28 +0200 | [diff] [blame] | 137 | { |
Heikki Krogerus | b96d3b0 | 2012-02-13 13:24:18 +0200 | [diff] [blame] | 138 | void __iomem *addr = phy->io_priv; |
Heikki Krogerus | ffb865b | 2010-03-25 13:25:28 +0200 | [diff] [blame] | 139 | int i = 0; |
| 140 | u8 r; |
| 141 | u8 power; |
Grazvydas Ignotas | bf070bc | 2012-03-21 16:35:52 +0200 | [diff] [blame] | 142 | int ret; |
| 143 | |
| 144 | pm_runtime_get_sync(phy->io_dev); |
Heikki Krogerus | ffb865b | 2010-03-25 13:25:28 +0200 | [diff] [blame] | 145 | |
| 146 | /* Make sure the transceiver is not in low power mode */ |
| 147 | power = musb_readb(addr, MUSB_POWER); |
| 148 | power &= ~MUSB_POWER_SUSPENDM; |
| 149 | musb_writeb(addr, MUSB_POWER, power); |
| 150 | |
| 151 | /* REVISIT: musbhdrc_ulpi_an.pdf recommends setting the |
| 152 | * ULPICarKitControlDisableUTMI after clearing POWER_SUSPENDM. |
| 153 | */ |
| 154 | |
| 155 | musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)offset); |
| 156 | musb_writeb(addr, MUSB_ULPI_REG_CONTROL, |
| 157 | MUSB_ULPI_REG_REQ | MUSB_ULPI_RDN_WR); |
| 158 | |
| 159 | while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL) |
| 160 | & MUSB_ULPI_REG_CMPLT)) { |
| 161 | i++; |
Grazvydas Ignotas | bf070bc | 2012-03-21 16:35:52 +0200 | [diff] [blame] | 162 | if (i == 10000) { |
| 163 | ret = -ETIMEDOUT; |
| 164 | goto out; |
| 165 | } |
Heikki Krogerus | ffb865b | 2010-03-25 13:25:28 +0200 | [diff] [blame] | 166 | |
| 167 | } |
| 168 | r = musb_readb(addr, MUSB_ULPI_REG_CONTROL); |
| 169 | r &= ~MUSB_ULPI_REG_CMPLT; |
| 170 | musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r); |
| 171 | |
Grazvydas Ignotas | bf070bc | 2012-03-21 16:35:52 +0200 | [diff] [blame] | 172 | ret = musb_readb(addr, MUSB_ULPI_REG_DATA); |
| 173 | |
| 174 | out: |
| 175 | pm_runtime_put(phy->io_dev); |
| 176 | |
| 177 | return ret; |
Heikki Krogerus | ffb865b | 2010-03-25 13:25:28 +0200 | [diff] [blame] | 178 | } |
| 179 | |
Heikki Krogerus | b96d3b0 | 2012-02-13 13:24:18 +0200 | [diff] [blame] | 180 | static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data) |
Heikki Krogerus | ffb865b | 2010-03-25 13:25:28 +0200 | [diff] [blame] | 181 | { |
Heikki Krogerus | b96d3b0 | 2012-02-13 13:24:18 +0200 | [diff] [blame] | 182 | void __iomem *addr = phy->io_priv; |
Heikki Krogerus | ffb865b | 2010-03-25 13:25:28 +0200 | [diff] [blame] | 183 | int i = 0; |
| 184 | u8 r = 0; |
| 185 | u8 power; |
Grazvydas Ignotas | bf070bc | 2012-03-21 16:35:52 +0200 | [diff] [blame] | 186 | int ret = 0; |
| 187 | |
| 188 | pm_runtime_get_sync(phy->io_dev); |
Heikki Krogerus | ffb865b | 2010-03-25 13:25:28 +0200 | [diff] [blame] | 189 | |
| 190 | /* Make sure the transceiver is not in low power mode */ |
| 191 | power = musb_readb(addr, MUSB_POWER); |
| 192 | power &= ~MUSB_POWER_SUSPENDM; |
| 193 | musb_writeb(addr, MUSB_POWER, power); |
| 194 | |
| 195 | musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)offset); |
| 196 | musb_writeb(addr, MUSB_ULPI_REG_DATA, (u8)data); |
| 197 | musb_writeb(addr, MUSB_ULPI_REG_CONTROL, MUSB_ULPI_REG_REQ); |
| 198 | |
| 199 | while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL) |
| 200 | & MUSB_ULPI_REG_CMPLT)) { |
| 201 | i++; |
Grazvydas Ignotas | bf070bc | 2012-03-21 16:35:52 +0200 | [diff] [blame] | 202 | if (i == 10000) { |
| 203 | ret = -ETIMEDOUT; |
| 204 | goto out; |
| 205 | } |
Heikki Krogerus | ffb865b | 2010-03-25 13:25:28 +0200 | [diff] [blame] | 206 | } |
| 207 | |
| 208 | r = musb_readb(addr, MUSB_ULPI_REG_CONTROL); |
| 209 | r &= ~MUSB_ULPI_REG_CMPLT; |
| 210 | musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r); |
| 211 | |
Grazvydas Ignotas | bf070bc | 2012-03-21 16:35:52 +0200 | [diff] [blame] | 212 | out: |
| 213 | pm_runtime_put(phy->io_dev); |
| 214 | |
| 215 | return ret; |
Heikki Krogerus | ffb865b | 2010-03-25 13:25:28 +0200 | [diff] [blame] | 216 | } |
| 217 | #else |
Mike Frysinger | f2263db | 2010-06-24 23:07:08 +0530 | [diff] [blame] | 218 | #define musb_ulpi_read NULL |
| 219 | #define musb_ulpi_write NULL |
Heikki Krogerus | ffb865b | 2010-03-25 13:25:28 +0200 | [diff] [blame] | 220 | #endif |
| 221 | |
Heikki Krogerus | b96d3b0 | 2012-02-13 13:24:18 +0200 | [diff] [blame] | 222 | static struct usb_phy_io_ops musb_ulpi_access = { |
Heikki Krogerus | ffb865b | 2010-03-25 13:25:28 +0200 | [diff] [blame] | 223 | .read = musb_ulpi_read, |
| 224 | .write = musb_ulpi_write, |
| 225 | }; |
| 226 | |
| 227 | /*-------------------------------------------------------------------------*/ |
| 228 | |
Felipe Balbi | 7c92554 | 2010-12-01 14:23:48 +0200 | [diff] [blame] | 229 | #if !defined(CONFIG_USB_MUSB_TUSB6010) && !defined(CONFIG_USB_MUSB_BLACKFIN) |
Bryan Wu | c6cf8b0 | 2008-12-02 21:33:48 +0200 | [diff] [blame] | 230 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 231 | /* |
| 232 | * Load an endpoint's FIFO |
| 233 | */ |
| 234 | void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) |
| 235 | { |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 236 | struct musb *musb = hw_ep->musb; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 237 | void __iomem *fifo = hw_ep->fifo; |
| 238 | |
Ajay Kumar Gupta | 603fe2b | 2012-07-20 11:07:24 +0530 | [diff] [blame] | 239 | if (unlikely(len == 0)) |
| 240 | return; |
| 241 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 242 | prefetch((u8 *)src); |
| 243 | |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 244 | dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n", |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 245 | 'T', hw_ep->epnum, fifo, len, src); |
| 246 | |
| 247 | /* we can't assume unaligned reads work */ |
| 248 | if (likely((0x01 & (unsigned long) src) == 0)) { |
| 249 | u16 index = 0; |
| 250 | |
| 251 | /* best case is 32bit-aligned source address */ |
| 252 | if ((0x02 & (unsigned long) src) == 0) { |
| 253 | if (len >= 4) { |
| 254 | writesl(fifo, src + index, len >> 2); |
| 255 | index += len & ~0x03; |
| 256 | } |
| 257 | if (len & 0x02) { |
| 258 | musb_writew(fifo, 0, *(u16 *)&src[index]); |
| 259 | index += 2; |
| 260 | } |
| 261 | } else { |
| 262 | if (len >= 2) { |
| 263 | writesw(fifo, src + index, len >> 1); |
| 264 | index += len & ~0x01; |
| 265 | } |
| 266 | } |
| 267 | if (len & 0x01) |
| 268 | musb_writeb(fifo, 0, src[index]); |
| 269 | } else { |
| 270 | /* byte aligned */ |
| 271 | writesb(fifo, src, len); |
| 272 | } |
| 273 | } |
| 274 | |
Ajay Kumar Gupta | 843bb1d | 2010-10-19 10:08:13 +0300 | [diff] [blame] | 275 | #if !defined(CONFIG_USB_MUSB_AM35X) |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 276 | /* |
| 277 | * Unload an endpoint's FIFO |
| 278 | */ |
| 279 | void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) |
| 280 | { |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 281 | struct musb *musb = hw_ep->musb; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 282 | void __iomem *fifo = hw_ep->fifo; |
| 283 | |
Ajay Kumar Gupta | 603fe2b | 2012-07-20 11:07:24 +0530 | [diff] [blame] | 284 | if (unlikely(len == 0)) |
| 285 | return; |
| 286 | |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 287 | dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n", |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 288 | 'R', hw_ep->epnum, fifo, len, dst); |
| 289 | |
| 290 | /* we can't assume unaligned writes work */ |
| 291 | if (likely((0x01 & (unsigned long) dst) == 0)) { |
| 292 | u16 index = 0; |
| 293 | |
| 294 | /* best case is 32bit-aligned destination address */ |
| 295 | if ((0x02 & (unsigned long) dst) == 0) { |
| 296 | if (len >= 4) { |
| 297 | readsl(fifo, dst, len >> 2); |
| 298 | index = len & ~0x03; |
| 299 | } |
| 300 | if (len & 0x02) { |
| 301 | *(u16 *)&dst[index] = musb_readw(fifo, 0); |
| 302 | index += 2; |
| 303 | } |
| 304 | } else { |
| 305 | if (len >= 2) { |
| 306 | readsw(fifo, dst, len >> 1); |
| 307 | index = len & ~0x01; |
| 308 | } |
| 309 | } |
| 310 | if (len & 0x01) |
| 311 | dst[index] = musb_readb(fifo, 0); |
| 312 | } else { |
| 313 | /* byte aligned */ |
| 314 | readsb(fifo, dst, len); |
| 315 | } |
| 316 | } |
Ajay Kumar Gupta | 843bb1d | 2010-10-19 10:08:13 +0300 | [diff] [blame] | 317 | #endif |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 318 | |
| 319 | #endif /* normal PIO */ |
| 320 | |
| 321 | |
| 322 | /*-------------------------------------------------------------------------*/ |
| 323 | |
| 324 | /* for high speed test mode; see USB 2.0 spec 7.1.20 */ |
| 325 | static const u8 musb_test_packet[53] = { |
| 326 | /* implicit SYNC then DATA0 to start */ |
| 327 | |
| 328 | /* JKJKJKJK x9 */ |
| 329 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 330 | /* JJKKJJKK x8 */ |
| 331 | 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, |
| 332 | /* JJJJKKKK x8 */ |
| 333 | 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, |
| 334 | /* JJJJJJJKKKKKKK x8 */ |
| 335 | 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, |
| 336 | /* JJJJJJJK x8 */ |
| 337 | 0x7f, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd, |
| 338 | /* JKKKKKKK x10, JK */ |
| 339 | 0xfc, 0x7e, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd, 0x7e |
| 340 | |
| 341 | /* implicit CRC16 then EOP to end */ |
| 342 | }; |
| 343 | |
| 344 | void musb_load_testpacket(struct musb *musb) |
| 345 | { |
| 346 | void __iomem *regs = musb->endpoints[0].regs; |
| 347 | |
| 348 | musb_ep_select(musb->mregs, 0); |
| 349 | musb_write_fifo(musb->control_ep, |
| 350 | sizeof(musb_test_packet), musb_test_packet); |
| 351 | musb_writew(regs, MUSB_CSR0, MUSB_CSR0_TXPKTRDY); |
| 352 | } |
| 353 | |
| 354 | /*-------------------------------------------------------------------------*/ |
| 355 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 356 | /* |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 357 | * Handles OTG hnp timeouts, such as b_ase0_brst |
| 358 | */ |
Felipe Balbi | a156544 | 2012-08-07 14:00:50 +0300 | [diff] [blame] | 359 | static void musb_otg_timer_func(unsigned long data) |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 360 | { |
| 361 | struct musb *musb = (struct musb *)data; |
| 362 | unsigned long flags; |
| 363 | |
| 364 | spin_lock_irqsave(&musb->lock, flags); |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 365 | switch (musb->xceiv->state) { |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 366 | case OTG_STATE_B_WAIT_ACON: |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 367 | dev_dbg(musb->controller, "HNP: b_wait_acon timeout; back to b_peripheral\n"); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 368 | musb_g_disconnect(musb); |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 369 | musb->xceiv->state = OTG_STATE_B_PERIPHERAL; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 370 | musb->is_active = 0; |
| 371 | break; |
David Brownell | ab983f2a | 2009-03-31 12:35:09 -0700 | [diff] [blame] | 372 | case OTG_STATE_A_SUSPEND: |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 373 | case OTG_STATE_A_WAIT_BCON: |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 374 | dev_dbg(musb->controller, "HNP: %s timeout\n", |
Anatolij Gustschin | 3df0045 | 2011-05-05 12:11:21 +0200 | [diff] [blame] | 375 | otg_state_string(musb->xceiv->state)); |
Felipe Balbi | 743411b | 2010-12-01 13:22:05 +0200 | [diff] [blame] | 376 | musb_platform_set_vbus(musb, 0); |
David Brownell | ab983f2a | 2009-03-31 12:35:09 -0700 | [diff] [blame] | 377 | musb->xceiv->state = OTG_STATE_A_WAIT_VFALL; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 378 | break; |
| 379 | default: |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 380 | dev_dbg(musb->controller, "HNP: Unhandled mode %s\n", |
Anatolij Gustschin | 3df0045 | 2011-05-05 12:11:21 +0200 | [diff] [blame] | 381 | otg_state_string(musb->xceiv->state)); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 382 | } |
| 383 | musb->ignore_disconnect = 0; |
| 384 | spin_unlock_irqrestore(&musb->lock, flags); |
| 385 | } |
| 386 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 387 | /* |
David Brownell | f7f9d63 | 2009-03-31 12:32:12 -0700 | [diff] [blame] | 388 | * Stops the HNP transition. Caller must take care of locking. |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 389 | */ |
| 390 | void musb_hnp_stop(struct musb *musb) |
| 391 | { |
| 392 | struct usb_hcd *hcd = musb_to_hcd(musb); |
| 393 | void __iomem *mbase = musb->mregs; |
| 394 | u8 reg; |
| 395 | |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 396 | dev_dbg(musb->controller, "HNP: stop from %s\n", otg_state_string(musb->xceiv->state)); |
David Brownell | ab983f2a | 2009-03-31 12:35:09 -0700 | [diff] [blame] | 397 | |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 398 | switch (musb->xceiv->state) { |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 399 | case OTG_STATE_A_PERIPHERAL: |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 400 | musb_g_disconnect(musb); |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 401 | dev_dbg(musb->controller, "HNP: back to %s\n", |
Anatolij Gustschin | 3df0045 | 2011-05-05 12:11:21 +0200 | [diff] [blame] | 402 | otg_state_string(musb->xceiv->state)); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 403 | break; |
| 404 | case OTG_STATE_B_HOST: |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 405 | dev_dbg(musb->controller, "HNP: Disabling HR\n"); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 406 | hcd->self.is_b_host = 0; |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 407 | musb->xceiv->state = OTG_STATE_B_PERIPHERAL; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 408 | MUSB_DEV_MODE(musb); |
| 409 | reg = musb_readb(mbase, MUSB_POWER); |
| 410 | reg |= MUSB_POWER_SUSPENDM; |
| 411 | musb_writeb(mbase, MUSB_POWER, reg); |
| 412 | /* REVISIT: Start SESSION_REQUEST here? */ |
| 413 | break; |
| 414 | default: |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 415 | dev_dbg(musb->controller, "HNP: Stopping in unknown state %s\n", |
Anatolij Gustschin | 3df0045 | 2011-05-05 12:11:21 +0200 | [diff] [blame] | 416 | otg_state_string(musb->xceiv->state)); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 417 | } |
| 418 | |
| 419 | /* |
| 420 | * When returning to A state after HNP, avoid hub_port_rebounce(), |
| 421 | * which cause occasional OPT A "Did not receive reset after connect" |
| 422 | * errors. |
| 423 | */ |
Alan Stern | 749da5f | 2010-03-04 17:05:08 -0500 | [diff] [blame] | 424 | musb->port1_status &= ~(USB_PORT_STAT_C_CONNECTION << 16); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 425 | } |
| 426 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 427 | /* |
| 428 | * Interrupt Service Routine to record USB "global" interrupts. |
| 429 | * Since these do not happen often and signify things of |
| 430 | * paramount importance, it seems OK to check them individually; |
| 431 | * the order of the tests is specified in the manual |
| 432 | * |
| 433 | * @param musb instance pointer |
| 434 | * @param int_usb register contents |
| 435 | * @param devctl |
| 436 | * @param power |
| 437 | */ |
| 438 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 439 | static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, |
Sebastian Andrzej Siewior | b11e94d | 2012-10-30 19:52:23 +0100 | [diff] [blame] | 440 | u8 devctl) |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 441 | { |
Heikki Krogerus | d445b6d | 2012-02-13 13:24:15 +0200 | [diff] [blame] | 442 | struct usb_otg *otg = musb->xceiv->otg; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 443 | irqreturn_t handled = IRQ_NONE; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 444 | |
Sebastian Andrzej Siewior | b11e94d | 2012-10-30 19:52:23 +0100 | [diff] [blame] | 445 | dev_dbg(musb->controller, "<== DevCtl=%02x, int_usb=0x%x\n", devctl, |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 446 | int_usb); |
| 447 | |
| 448 | /* in host mode, the peripheral may issue remote wakeup. |
| 449 | * in peripheral mode, the host may resume the link. |
| 450 | * spurious RESUME irqs happen too, paired with SUSPEND. |
| 451 | */ |
| 452 | if (int_usb & MUSB_INTR_RESUME) { |
| 453 | handled = IRQ_HANDLED; |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 454 | dev_dbg(musb->controller, "RESUME (%s)\n", otg_state_string(musb->xceiv->state)); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 455 | |
| 456 | if (devctl & MUSB_DEVCTL_HM) { |
Felipe Balbi | aa47145 | 2010-03-12 10:27:24 +0200 | [diff] [blame] | 457 | void __iomem *mbase = musb->mregs; |
Sebastian Andrzej Siewior | b11e94d | 2012-10-30 19:52:23 +0100 | [diff] [blame] | 458 | u8 power; |
Felipe Balbi | aa47145 | 2010-03-12 10:27:24 +0200 | [diff] [blame] | 459 | |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 460 | switch (musb->xceiv->state) { |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 461 | case OTG_STATE_A_SUSPEND: |
| 462 | /* remote wakeup? later, GetPortStatus |
| 463 | * will stop RESUME signaling |
| 464 | */ |
| 465 | |
Sebastian Andrzej Siewior | b11e94d | 2012-10-30 19:52:23 +0100 | [diff] [blame] | 466 | power = musb_readb(musb->mregs, MUSB_POWER); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 467 | if (power & MUSB_POWER_SUSPENDM) { |
| 468 | /* spurious */ |
| 469 | musb->int_usb &= ~MUSB_INTR_SUSPEND; |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 470 | dev_dbg(musb->controller, "Spurious SUSPENDM\n"); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 471 | break; |
| 472 | } |
| 473 | |
| 474 | power &= ~MUSB_POWER_SUSPENDM; |
| 475 | musb_writeb(mbase, MUSB_POWER, |
| 476 | power | MUSB_POWER_RESUME); |
| 477 | |
| 478 | musb->port1_status |= |
| 479 | (USB_PORT_STAT_C_SUSPEND << 16) |
| 480 | | MUSB_PORT_STAT_RESUME; |
| 481 | musb->rh_timer = jiffies |
| 482 | + msecs_to_jiffies(20); |
| 483 | |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 484 | musb->xceiv->state = OTG_STATE_A_HOST; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 485 | musb->is_active = 1; |
| 486 | usb_hcd_resume_root_hub(musb_to_hcd(musb)); |
| 487 | break; |
| 488 | case OTG_STATE_B_WAIT_ACON: |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 489 | musb->xceiv->state = OTG_STATE_B_PERIPHERAL; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 490 | musb->is_active = 1; |
| 491 | MUSB_DEV_MODE(musb); |
| 492 | break; |
| 493 | default: |
| 494 | WARNING("bogus %s RESUME (%s)\n", |
| 495 | "host", |
Anatolij Gustschin | 3df0045 | 2011-05-05 12:11:21 +0200 | [diff] [blame] | 496 | otg_state_string(musb->xceiv->state)); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 497 | } |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 498 | } else { |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 499 | switch (musb->xceiv->state) { |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 500 | case OTG_STATE_A_SUSPEND: |
| 501 | /* possibly DISCONNECT is upcoming */ |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 502 | musb->xceiv->state = OTG_STATE_A_HOST; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 503 | usb_hcd_resume_root_hub(musb_to_hcd(musb)); |
| 504 | break; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 505 | case OTG_STATE_B_WAIT_ACON: |
| 506 | case OTG_STATE_B_PERIPHERAL: |
| 507 | /* disconnect while suspended? we may |
| 508 | * not get a disconnect irq... |
| 509 | */ |
| 510 | if ((devctl & MUSB_DEVCTL_VBUS) |
| 511 | != (3 << MUSB_DEVCTL_VBUS_SHIFT) |
| 512 | ) { |
| 513 | musb->int_usb |= MUSB_INTR_DISCONNECT; |
| 514 | musb->int_usb &= ~MUSB_INTR_SUSPEND; |
| 515 | break; |
| 516 | } |
| 517 | musb_g_resume(musb); |
| 518 | break; |
| 519 | case OTG_STATE_B_IDLE: |
| 520 | musb->int_usb &= ~MUSB_INTR_SUSPEND; |
| 521 | break; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 522 | default: |
| 523 | WARNING("bogus %s RESUME (%s)\n", |
| 524 | "peripheral", |
Anatolij Gustschin | 3df0045 | 2011-05-05 12:11:21 +0200 | [diff] [blame] | 525 | otg_state_string(musb->xceiv->state)); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 526 | } |
| 527 | } |
| 528 | } |
| 529 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 530 | /* see manual for the order of the tests */ |
| 531 | if (int_usb & MUSB_INTR_SESSREQ) { |
Felipe Balbi | aa47145 | 2010-03-12 10:27:24 +0200 | [diff] [blame] | 532 | void __iomem *mbase = musb->mregs; |
| 533 | |
Heikki Krogerus | 19aab56 | 2010-10-29 04:23:27 -0500 | [diff] [blame] | 534 | if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS |
| 535 | && (devctl & MUSB_DEVCTL_BDEVICE)) { |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 536 | dev_dbg(musb->controller, "SessReq while on B state\n"); |
Heikki Krogerus | a6038ee | 2010-09-24 13:44:13 +0300 | [diff] [blame] | 537 | return IRQ_HANDLED; |
| 538 | } |
| 539 | |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 540 | dev_dbg(musb->controller, "SESSION_REQUEST (%s)\n", |
Anatolij Gustschin | 3df0045 | 2011-05-05 12:11:21 +0200 | [diff] [blame] | 541 | otg_state_string(musb->xceiv->state)); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 542 | |
| 543 | /* IRQ arrives from ID pin sense or (later, if VBUS power |
| 544 | * is removed) SRP. responses are time critical: |
| 545 | * - turn on VBUS (with silicon-specific mechanism) |
| 546 | * - go through A_WAIT_VRISE |
| 547 | * - ... to A_WAIT_BCON. |
| 548 | * a_wait_vrise_tmout triggers VBUS_ERROR transitions |
| 549 | */ |
| 550 | musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION); |
| 551 | musb->ep0_stage = MUSB_EP0_START; |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 552 | musb->xceiv->state = OTG_STATE_A_IDLE; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 553 | MUSB_HST_MODE(musb); |
Felipe Balbi | 743411b | 2010-12-01 13:22:05 +0200 | [diff] [blame] | 554 | musb_platform_set_vbus(musb, 1); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 555 | |
| 556 | handled = IRQ_HANDLED; |
| 557 | } |
| 558 | |
| 559 | if (int_usb & MUSB_INTR_VBUSERROR) { |
| 560 | int ignore = 0; |
| 561 | |
| 562 | /* During connection as an A-Device, we may see a short |
| 563 | * current spikes causing voltage drop, because of cable |
| 564 | * and peripheral capacitance combined with vbus draw. |
| 565 | * (So: less common with truly self-powered devices, where |
| 566 | * vbus doesn't act like a power supply.) |
| 567 | * |
| 568 | * Such spikes are short; usually less than ~500 usec, max |
| 569 | * of ~2 msec. That is, they're not sustained overcurrent |
| 570 | * errors, though they're reported using VBUSERROR irqs. |
| 571 | * |
| 572 | * Workarounds: (a) hardware: use self powered devices. |
| 573 | * (b) software: ignore non-repeated VBUS errors. |
| 574 | * |
| 575 | * REVISIT: do delays from lots of DEBUG_KERNEL checks |
| 576 | * make trouble here, keeping VBUS < 4.4V ? |
| 577 | */ |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 578 | switch (musb->xceiv->state) { |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 579 | case OTG_STATE_A_HOST: |
| 580 | /* recovery is dicey once we've gotten past the |
| 581 | * initial stages of enumeration, but if VBUS |
| 582 | * stayed ok at the other end of the link, and |
| 583 | * another reset is due (at least for high speed, |
| 584 | * to redo the chirp etc), it might work OK... |
| 585 | */ |
| 586 | case OTG_STATE_A_WAIT_BCON: |
| 587 | case OTG_STATE_A_WAIT_VRISE: |
| 588 | if (musb->vbuserr_retry) { |
Felipe Balbi | aa47145 | 2010-03-12 10:27:24 +0200 | [diff] [blame] | 589 | void __iomem *mbase = musb->mregs; |
| 590 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 591 | musb->vbuserr_retry--; |
| 592 | ignore = 1; |
| 593 | devctl |= MUSB_DEVCTL_SESSION; |
| 594 | musb_writeb(mbase, MUSB_DEVCTL, devctl); |
| 595 | } else { |
| 596 | musb->port1_status |= |
Alan Stern | 749da5f | 2010-03-04 17:05:08 -0500 | [diff] [blame] | 597 | USB_PORT_STAT_OVERCURRENT |
| 598 | | (USB_PORT_STAT_C_OVERCURRENT << 16); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 599 | } |
| 600 | break; |
| 601 | default: |
| 602 | break; |
| 603 | } |
| 604 | |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 605 | dev_dbg(musb->controller, "VBUS_ERROR in %s (%02x, %s), retry #%d, port1 %08x\n", |
Anatolij Gustschin | 3df0045 | 2011-05-05 12:11:21 +0200 | [diff] [blame] | 606 | otg_state_string(musb->xceiv->state), |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 607 | devctl, |
| 608 | ({ char *s; |
| 609 | switch (devctl & MUSB_DEVCTL_VBUS) { |
| 610 | case 0 << MUSB_DEVCTL_VBUS_SHIFT: |
| 611 | s = "<SessEnd"; break; |
| 612 | case 1 << MUSB_DEVCTL_VBUS_SHIFT: |
| 613 | s = "<AValid"; break; |
| 614 | case 2 << MUSB_DEVCTL_VBUS_SHIFT: |
| 615 | s = "<VBusValid"; break; |
| 616 | /* case 3 << MUSB_DEVCTL_VBUS_SHIFT: */ |
| 617 | default: |
| 618 | s = "VALID"; break; |
| 619 | }; s; }), |
| 620 | VBUSERR_RETRY_COUNT - musb->vbuserr_retry, |
| 621 | musb->port1_status); |
| 622 | |
| 623 | /* go through A_WAIT_VFALL then start a new session */ |
| 624 | if (!ignore) |
Felipe Balbi | 743411b | 2010-12-01 13:22:05 +0200 | [diff] [blame] | 625 | musb_platform_set_vbus(musb, 0); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 626 | handled = IRQ_HANDLED; |
| 627 | } |
| 628 | |
Arnaud Mandy | 1c25fda | 2009-12-28 13:40:40 +0200 | [diff] [blame] | 629 | if (int_usb & MUSB_INTR_SUSPEND) { |
Sebastian Andrzej Siewior | b11e94d | 2012-10-30 19:52:23 +0100 | [diff] [blame] | 630 | dev_dbg(musb->controller, "SUSPEND (%s) devctl %02x\n", |
| 631 | otg_state_string(musb->xceiv->state), devctl); |
Arnaud Mandy | 1c25fda | 2009-12-28 13:40:40 +0200 | [diff] [blame] | 632 | handled = IRQ_HANDLED; |
| 633 | |
| 634 | switch (musb->xceiv->state) { |
Arnaud Mandy | 1c25fda | 2009-12-28 13:40:40 +0200 | [diff] [blame] | 635 | case OTG_STATE_A_PERIPHERAL: |
| 636 | /* We also come here if the cable is removed, since |
| 637 | * this silicon doesn't report ID-no-longer-grounded. |
| 638 | * |
| 639 | * We depend on T(a_wait_bcon) to shut us down, and |
| 640 | * hope users don't do anything dicey during this |
| 641 | * undesired detour through A_WAIT_BCON. |
| 642 | */ |
| 643 | musb_hnp_stop(musb); |
| 644 | usb_hcd_resume_root_hub(musb_to_hcd(musb)); |
| 645 | musb_root_disconnect(musb); |
| 646 | musb_platform_try_idle(musb, jiffies |
| 647 | + msecs_to_jiffies(musb->a_wait_bcon |
| 648 | ? : OTG_TIME_A_WAIT_BCON)); |
| 649 | |
| 650 | break; |
Arnaud Mandy | 1c25fda | 2009-12-28 13:40:40 +0200 | [diff] [blame] | 651 | case OTG_STATE_B_IDLE: |
| 652 | if (!musb->is_active) |
| 653 | break; |
| 654 | case OTG_STATE_B_PERIPHERAL: |
| 655 | musb_g_suspend(musb); |
Felipe Balbi | 032ec49 | 2011-11-24 15:46:26 +0200 | [diff] [blame] | 656 | musb->is_active = otg->gadget->b_hnp_enable; |
Arnaud Mandy | 1c25fda | 2009-12-28 13:40:40 +0200 | [diff] [blame] | 657 | if (musb->is_active) { |
Arnaud Mandy | 1c25fda | 2009-12-28 13:40:40 +0200 | [diff] [blame] | 658 | musb->xceiv->state = OTG_STATE_B_WAIT_ACON; |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 659 | dev_dbg(musb->controller, "HNP: Setting timer for b_ase0_brst\n"); |
Arnaud Mandy | 1c25fda | 2009-12-28 13:40:40 +0200 | [diff] [blame] | 660 | mod_timer(&musb->otg_timer, jiffies |
| 661 | + msecs_to_jiffies( |
| 662 | OTG_TIME_B_ASE0_BRST)); |
Arnaud Mandy | 1c25fda | 2009-12-28 13:40:40 +0200 | [diff] [blame] | 663 | } |
| 664 | break; |
| 665 | case OTG_STATE_A_WAIT_BCON: |
| 666 | if (musb->a_wait_bcon != 0) |
| 667 | musb_platform_try_idle(musb, jiffies |
| 668 | + msecs_to_jiffies(musb->a_wait_bcon)); |
| 669 | break; |
| 670 | case OTG_STATE_A_HOST: |
| 671 | musb->xceiv->state = OTG_STATE_A_SUSPEND; |
Felipe Balbi | 032ec49 | 2011-11-24 15:46:26 +0200 | [diff] [blame] | 672 | musb->is_active = otg->host->b_hnp_enable; |
Arnaud Mandy | 1c25fda | 2009-12-28 13:40:40 +0200 | [diff] [blame] | 673 | break; |
| 674 | case OTG_STATE_B_HOST: |
| 675 | /* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */ |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 676 | dev_dbg(musb->controller, "REVISIT: SUSPEND as B_HOST\n"); |
Arnaud Mandy | 1c25fda | 2009-12-28 13:40:40 +0200 | [diff] [blame] | 677 | break; |
| 678 | default: |
| 679 | /* "should not happen" */ |
| 680 | musb->is_active = 0; |
| 681 | break; |
| 682 | } |
| 683 | } |
| 684 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 685 | if (int_usb & MUSB_INTR_CONNECT) { |
| 686 | struct usb_hcd *hcd = musb_to_hcd(musb); |
| 687 | |
| 688 | handled = IRQ_HANDLED; |
| 689 | musb->is_active = 1; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 690 | |
| 691 | musb->ep0_stage = MUSB_EP0_START; |
| 692 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 693 | /* flush endpoints when transitioning from Device Mode */ |
| 694 | if (is_peripheral_active(musb)) { |
| 695 | /* REVISIT HNP; just force disconnect */ |
| 696 | } |
Sebastian Andrzej Siewior | b18d26f | 2012-10-30 19:52:26 +0100 | [diff] [blame] | 697 | musb->intrtxe = musb->epmask; |
| 698 | musb_writew(musb->mregs, MUSB_INTRTXE, musb->intrtxe); |
Sebastian Andrzej Siewior | af5ec14 | 2012-10-30 19:52:25 +0100 | [diff] [blame] | 699 | musb->intrrxe = musb->epmask & 0xfffe; |
| 700 | musb_writew(musb->mregs, MUSB_INTRRXE, musb->intrrxe); |
Ajay Kumar Gupta | d709d22 | 2010-07-08 14:03:00 +0530 | [diff] [blame] | 701 | musb_writeb(musb->mregs, MUSB_INTRUSBE, 0xf7); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 702 | musb->port1_status &= ~(USB_PORT_STAT_LOW_SPEED |
| 703 | |USB_PORT_STAT_HIGH_SPEED |
| 704 | |USB_PORT_STAT_ENABLE |
| 705 | ); |
| 706 | musb->port1_status |= USB_PORT_STAT_CONNECTION |
| 707 | |(USB_PORT_STAT_C_CONNECTION << 16); |
| 708 | |
| 709 | /* high vs full speed is just a guess until after reset */ |
| 710 | if (devctl & MUSB_DEVCTL_LSDEV) |
| 711 | musb->port1_status |= USB_PORT_STAT_LOW_SPEED; |
| 712 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 713 | /* indicate new connection to OTG machine */ |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 714 | switch (musb->xceiv->state) { |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 715 | case OTG_STATE_B_PERIPHERAL: |
| 716 | if (int_usb & MUSB_INTR_SUSPEND) { |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 717 | dev_dbg(musb->controller, "HNP: SUSPEND+CONNECT, now b_host\n"); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 718 | int_usb &= ~MUSB_INTR_SUSPEND; |
David Brownell | 1de00da | 2009-04-02 10:16:11 -0700 | [diff] [blame] | 719 | goto b_host; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 720 | } else |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 721 | dev_dbg(musb->controller, "CONNECT as b_peripheral???\n"); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 722 | break; |
| 723 | case OTG_STATE_B_WAIT_ACON: |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 724 | dev_dbg(musb->controller, "HNP: CONNECT, now b_host\n"); |
David Brownell | 1de00da | 2009-04-02 10:16:11 -0700 | [diff] [blame] | 725 | b_host: |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 726 | musb->xceiv->state = OTG_STATE_B_HOST; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 727 | hcd->self.is_b_host = 1; |
David Brownell | 1de00da | 2009-04-02 10:16:11 -0700 | [diff] [blame] | 728 | musb->ignore_disconnect = 0; |
| 729 | del_timer(&musb->otg_timer); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 730 | break; |
| 731 | default: |
| 732 | if ((devctl & MUSB_DEVCTL_VBUS) |
| 733 | == (3 << MUSB_DEVCTL_VBUS_SHIFT)) { |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 734 | musb->xceiv->state = OTG_STATE_A_HOST; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 735 | hcd->self.is_b_host = 0; |
| 736 | } |
| 737 | break; |
| 738 | } |
David Brownell | 1de00da | 2009-04-02 10:16:11 -0700 | [diff] [blame] | 739 | |
| 740 | /* poke the root hub */ |
| 741 | MUSB_HST_MODE(musb); |
| 742 | if (hcd->status_urb) |
| 743 | usb_hcd_poll_rh_status(hcd); |
| 744 | else |
| 745 | usb_hcd_resume_root_hub(hcd); |
| 746 | |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 747 | dev_dbg(musb->controller, "CONNECT (%s) devctl %02x\n", |
Anatolij Gustschin | 3df0045 | 2011-05-05 12:11:21 +0200 | [diff] [blame] | 748 | otg_state_string(musb->xceiv->state), devctl); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 749 | } |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 750 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 751 | if ((int_usb & MUSB_INTR_DISCONNECT) && !musb->ignore_disconnect) { |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 752 | dev_dbg(musb->controller, "DISCONNECT (%s) as %s, devctl %02x\n", |
Anatolij Gustschin | 3df0045 | 2011-05-05 12:11:21 +0200 | [diff] [blame] | 753 | otg_state_string(musb->xceiv->state), |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 754 | MUSB_MODE(musb), devctl); |
| 755 | handled = IRQ_HANDLED; |
| 756 | |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 757 | switch (musb->xceiv->state) { |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 758 | case OTG_STATE_A_HOST: |
| 759 | case OTG_STATE_A_SUSPEND: |
Anand Gadiyar | 5c23c90 | 2009-02-21 15:31:40 -0800 | [diff] [blame] | 760 | usb_hcd_resume_root_hub(musb_to_hcd(musb)); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 761 | musb_root_disconnect(musb); |
Felipe Balbi | 032ec49 | 2011-11-24 15:46:26 +0200 | [diff] [blame] | 762 | if (musb->a_wait_bcon != 0) |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 763 | musb_platform_try_idle(musb, jiffies |
| 764 | + msecs_to_jiffies(musb->a_wait_bcon)); |
| 765 | break; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 766 | case OTG_STATE_B_HOST: |
David Brownell | ab983f2a | 2009-03-31 12:35:09 -0700 | [diff] [blame] | 767 | /* REVISIT this behaves for "real disconnect" |
| 768 | * cases; make sure the other transitions from |
| 769 | * from B_HOST act right too. The B_HOST code |
| 770 | * in hnp_stop() is currently not used... |
| 771 | */ |
| 772 | musb_root_disconnect(musb); |
| 773 | musb_to_hcd(musb)->self.is_b_host = 0; |
| 774 | musb->xceiv->state = OTG_STATE_B_PERIPHERAL; |
| 775 | MUSB_DEV_MODE(musb); |
| 776 | musb_g_disconnect(musb); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 777 | break; |
| 778 | case OTG_STATE_A_PERIPHERAL: |
| 779 | musb_hnp_stop(musb); |
| 780 | musb_root_disconnect(musb); |
| 781 | /* FALLTHROUGH */ |
| 782 | case OTG_STATE_B_WAIT_ACON: |
| 783 | /* FALLTHROUGH */ |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 784 | case OTG_STATE_B_PERIPHERAL: |
| 785 | case OTG_STATE_B_IDLE: |
| 786 | musb_g_disconnect(musb); |
| 787 | break; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 788 | default: |
| 789 | WARNING("unhandled DISCONNECT transition (%s)\n", |
Anatolij Gustschin | 3df0045 | 2011-05-05 12:11:21 +0200 | [diff] [blame] | 790 | otg_state_string(musb->xceiv->state)); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 791 | break; |
| 792 | } |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 793 | } |
| 794 | |
Arnaud Mandy | 1c25fda | 2009-12-28 13:40:40 +0200 | [diff] [blame] | 795 | /* mentor saves a bit: bus reset and babble share the same irq. |
| 796 | * only host sees babble; only peripheral sees bus reset. |
| 797 | */ |
| 798 | if (int_usb & MUSB_INTR_RESET) { |
| 799 | handled = IRQ_HANDLED; |
Felipe Balbi | a04d46d | 2011-11-24 15:46:27 +0200 | [diff] [blame] | 800 | if ((devctl & MUSB_DEVCTL_HM) != 0) { |
Arnaud Mandy | 1c25fda | 2009-12-28 13:40:40 +0200 | [diff] [blame] | 801 | /* |
| 802 | * Looks like non-HS BABBLE can be ignored, but |
| 803 | * HS BABBLE is an error condition. For HS the solution |
| 804 | * is to avoid babble in the first place and fix what |
| 805 | * caused BABBLE. When HS BABBLE happens we can only |
| 806 | * stop the session. |
| 807 | */ |
| 808 | if (devctl & (MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV)) |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 809 | dev_dbg(musb->controller, "BABBLE devctl: %02x\n", devctl); |
Arnaud Mandy | 1c25fda | 2009-12-28 13:40:40 +0200 | [diff] [blame] | 810 | else { |
| 811 | ERR("Stopping host session -- babble\n"); |
| 812 | musb_writeb(musb->mregs, MUSB_DEVCTL, 0); |
| 813 | } |
Felipe Balbi | a04d46d | 2011-11-24 15:46:27 +0200 | [diff] [blame] | 814 | } else { |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 815 | dev_dbg(musb->controller, "BUS RESET as %s\n", |
Anatolij Gustschin | 3df0045 | 2011-05-05 12:11:21 +0200 | [diff] [blame] | 816 | otg_state_string(musb->xceiv->state)); |
Arnaud Mandy | 1c25fda | 2009-12-28 13:40:40 +0200 | [diff] [blame] | 817 | switch (musb->xceiv->state) { |
Arnaud Mandy | 1c25fda | 2009-12-28 13:40:40 +0200 | [diff] [blame] | 818 | case OTG_STATE_A_SUSPEND: |
| 819 | /* We need to ignore disconnect on suspend |
| 820 | * otherwise tusb 2.0 won't reconnect after a |
| 821 | * power cycle, which breaks otg compliance. |
| 822 | */ |
| 823 | musb->ignore_disconnect = 1; |
| 824 | musb_g_reset(musb); |
| 825 | /* FALLTHROUGH */ |
| 826 | case OTG_STATE_A_WAIT_BCON: /* OPT TD.4.7-900ms */ |
| 827 | /* never use invalid T(a_wait_bcon) */ |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 828 | dev_dbg(musb->controller, "HNP: in %s, %d msec timeout\n", |
Anatolij Gustschin | 3df0045 | 2011-05-05 12:11:21 +0200 | [diff] [blame] | 829 | otg_state_string(musb->xceiv->state), |
| 830 | TA_WAIT_BCON(musb)); |
Arnaud Mandy | 1c25fda | 2009-12-28 13:40:40 +0200 | [diff] [blame] | 831 | mod_timer(&musb->otg_timer, jiffies |
| 832 | + msecs_to_jiffies(TA_WAIT_BCON(musb))); |
| 833 | break; |
| 834 | case OTG_STATE_A_PERIPHERAL: |
| 835 | musb->ignore_disconnect = 0; |
| 836 | del_timer(&musb->otg_timer); |
| 837 | musb_g_reset(musb); |
| 838 | break; |
| 839 | case OTG_STATE_B_WAIT_ACON: |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 840 | dev_dbg(musb->controller, "HNP: RESET (%s), to b_peripheral\n", |
Anatolij Gustschin | 3df0045 | 2011-05-05 12:11:21 +0200 | [diff] [blame] | 841 | otg_state_string(musb->xceiv->state)); |
Arnaud Mandy | 1c25fda | 2009-12-28 13:40:40 +0200 | [diff] [blame] | 842 | musb->xceiv->state = OTG_STATE_B_PERIPHERAL; |
| 843 | musb_g_reset(musb); |
| 844 | break; |
Arnaud Mandy | 1c25fda | 2009-12-28 13:40:40 +0200 | [diff] [blame] | 845 | case OTG_STATE_B_IDLE: |
| 846 | musb->xceiv->state = OTG_STATE_B_PERIPHERAL; |
| 847 | /* FALLTHROUGH */ |
| 848 | case OTG_STATE_B_PERIPHERAL: |
| 849 | musb_g_reset(musb); |
| 850 | break; |
| 851 | default: |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 852 | dev_dbg(musb->controller, "Unhandled BUS RESET as %s\n", |
Anatolij Gustschin | 3df0045 | 2011-05-05 12:11:21 +0200 | [diff] [blame] | 853 | otg_state_string(musb->xceiv->state)); |
Arnaud Mandy | 1c25fda | 2009-12-28 13:40:40 +0200 | [diff] [blame] | 854 | } |
| 855 | } |
| 856 | } |
| 857 | |
| 858 | #if 0 |
| 859 | /* REVISIT ... this would be for multiplexing periodic endpoints, or |
| 860 | * supporting transfer phasing to prevent exceeding ISO bandwidth |
| 861 | * limits of a given frame or microframe. |
| 862 | * |
| 863 | * It's not needed for peripheral side, which dedicates endpoints; |
| 864 | * though it _might_ use SOF irqs for other purposes. |
| 865 | * |
| 866 | * And it's not currently needed for host side, which also dedicates |
| 867 | * endpoints, relies on TX/RX interval registers, and isn't claimed |
| 868 | * to support ISO transfers yet. |
| 869 | */ |
| 870 | if (int_usb & MUSB_INTR_SOF) { |
| 871 | void __iomem *mbase = musb->mregs; |
| 872 | struct musb_hw_ep *ep; |
| 873 | u8 epnum; |
| 874 | u16 frame; |
| 875 | |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 876 | dev_dbg(musb->controller, "START_OF_FRAME\n"); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 877 | handled = IRQ_HANDLED; |
| 878 | |
Arnaud Mandy | 1c25fda | 2009-12-28 13:40:40 +0200 | [diff] [blame] | 879 | /* start any periodic Tx transfers waiting for current frame */ |
| 880 | frame = musb_readw(mbase, MUSB_FRAME); |
| 881 | ep = musb->endpoints; |
| 882 | for (epnum = 1; (epnum < musb->nr_endpoints) |
| 883 | && (musb->epmask >= (1 << epnum)); |
| 884 | epnum++, ep++) { |
| 885 | /* |
| 886 | * FIXME handle framecounter wraps (12 bits) |
| 887 | * eliminate duplicated StartUrb logic |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 888 | */ |
Arnaud Mandy | 1c25fda | 2009-12-28 13:40:40 +0200 | [diff] [blame] | 889 | if (ep->dwWaitFrame >= frame) { |
| 890 | ep->dwWaitFrame = 0; |
| 891 | pr_debug("SOF --> periodic TX%s on %d\n", |
| 892 | ep->tx_channel ? " DMA" : "", |
| 893 | epnum); |
| 894 | if (!ep->tx_channel) |
| 895 | musb_h_tx_start(musb, epnum); |
| 896 | else |
| 897 | cppi_hostdma_start(musb, epnum); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 898 | } |
Arnaud Mandy | 1c25fda | 2009-12-28 13:40:40 +0200 | [diff] [blame] | 899 | } /* end of for loop */ |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 900 | } |
Arnaud Mandy | 1c25fda | 2009-12-28 13:40:40 +0200 | [diff] [blame] | 901 | #endif |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 902 | |
Arnaud Mandy | 1c25fda | 2009-12-28 13:40:40 +0200 | [diff] [blame] | 903 | schedule_work(&musb->irq_work); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 904 | |
| 905 | return handled; |
| 906 | } |
| 907 | |
| 908 | /*-------------------------------------------------------------------------*/ |
| 909 | |
| 910 | /* |
| 911 | * Program the HDRC to start (enable interrupts, dma, etc.). |
| 912 | */ |
| 913 | void musb_start(struct musb *musb) |
| 914 | { |
| 915 | void __iomem *regs = musb->mregs; |
| 916 | u8 devctl = musb_readb(regs, MUSB_DEVCTL); |
| 917 | |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 918 | dev_dbg(musb->controller, "<== devctl %02x\n", devctl); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 919 | |
| 920 | /* Set INT enable registers, enable interrupts */ |
Sebastian Andrzej Siewior | b18d26f | 2012-10-30 19:52:26 +0100 | [diff] [blame] | 921 | musb->intrtxe = musb->epmask; |
| 922 | musb_writew(regs, MUSB_INTRTXE, musb->intrtxe); |
Sebastian Andrzej Siewior | af5ec14 | 2012-10-30 19:52:25 +0100 | [diff] [blame] | 923 | musb->intrrxe = musb->epmask & 0xfffe; |
| 924 | musb_writew(regs, MUSB_INTRRXE, musb->intrrxe); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 925 | musb_writeb(regs, MUSB_INTRUSBE, 0xf7); |
| 926 | |
| 927 | musb_writeb(regs, MUSB_TESTMODE, 0); |
| 928 | |
| 929 | /* put into basic highspeed mode and start session */ |
| 930 | musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 931 | | MUSB_POWER_HSENAB |
| 932 | /* ENSUSPEND wedges tusb */ |
| 933 | /* | MUSB_POWER_ENSUSPEND */ |
| 934 | ); |
| 935 | |
| 936 | musb->is_active = 0; |
| 937 | devctl = musb_readb(regs, MUSB_DEVCTL); |
| 938 | devctl &= ~MUSB_DEVCTL_SESSION; |
| 939 | |
Felipe Balbi | 032ec49 | 2011-11-24 15:46:26 +0200 | [diff] [blame] | 940 | /* session started after: |
| 941 | * (a) ID-grounded irq, host mode; |
| 942 | * (b) vbus present/connect IRQ, peripheral mode; |
| 943 | * (c) peripheral initiates, using SRP |
| 944 | */ |
| 945 | if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) |
| 946 | musb->is_active = 1; |
| 947 | else |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 948 | devctl |= MUSB_DEVCTL_SESSION; |
| 949 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 950 | musb_platform_enable(musb); |
| 951 | musb_writeb(regs, MUSB_DEVCTL, devctl); |
| 952 | } |
| 953 | |
| 954 | |
| 955 | static void musb_generic_disable(struct musb *musb) |
| 956 | { |
| 957 | void __iomem *mbase = musb->mregs; |
| 958 | u16 temp; |
| 959 | |
| 960 | /* disable interrupts */ |
| 961 | musb_writeb(mbase, MUSB_INTRUSBE, 0); |
Sebastian Andrzej Siewior | b18d26f | 2012-10-30 19:52:26 +0100 | [diff] [blame] | 962 | musb->intrtxe = 0; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 963 | musb_writew(mbase, MUSB_INTRTXE, 0); |
Sebastian Andrzej Siewior | af5ec14 | 2012-10-30 19:52:25 +0100 | [diff] [blame] | 964 | musb->intrrxe = 0; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 965 | musb_writew(mbase, MUSB_INTRRXE, 0); |
| 966 | |
| 967 | /* off */ |
| 968 | musb_writeb(mbase, MUSB_DEVCTL, 0); |
| 969 | |
| 970 | /* flush pending interrupts */ |
| 971 | temp = musb_readb(mbase, MUSB_INTRUSB); |
| 972 | temp = musb_readw(mbase, MUSB_INTRTX); |
| 973 | temp = musb_readw(mbase, MUSB_INTRRX); |
| 974 | |
| 975 | } |
| 976 | |
| 977 | /* |
| 978 | * Make the HDRC stop (disable interrupts, etc.); |
| 979 | * reversible by musb_start |
| 980 | * called on gadget driver unregister |
| 981 | * with controller locked, irqs blocked |
| 982 | * acts as a NOP unless some role activated the hardware |
| 983 | */ |
| 984 | void musb_stop(struct musb *musb) |
| 985 | { |
| 986 | /* stop IRQs, timers, ... */ |
| 987 | musb_platform_disable(musb); |
| 988 | musb_generic_disable(musb); |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 989 | dev_dbg(musb->controller, "HDRC disabled\n"); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 990 | |
| 991 | /* FIXME |
| 992 | * - mark host and/or peripheral drivers unusable/inactive |
| 993 | * - disable DMA (and enable it in HdrcStart) |
| 994 | * - make sure we can musb_start() after musb_stop(); with |
| 995 | * OTG mode, gadget driver module rmmod/modprobe cycles that |
| 996 | * - ... |
| 997 | */ |
| 998 | musb_platform_try_idle(musb, 0); |
| 999 | } |
| 1000 | |
| 1001 | static void musb_shutdown(struct platform_device *pdev) |
| 1002 | { |
| 1003 | struct musb *musb = dev_to_musb(&pdev->dev); |
| 1004 | unsigned long flags; |
| 1005 | |
Hema HK | 4f9edd2 | 2011-03-22 16:02:12 +0530 | [diff] [blame] | 1006 | pm_runtime_get_sync(musb->controller); |
Grazvydas Ignotas | 24307ca | 2012-01-12 15:22:45 +0200 | [diff] [blame] | 1007 | |
| 1008 | musb_gadget_cleanup(musb); |
| 1009 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1010 | spin_lock_irqsave(&musb->lock, flags); |
| 1011 | musb_platform_disable(musb); |
| 1012 | musb_generic_disable(musb); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1013 | spin_unlock_irqrestore(&musb->lock, flags); |
| 1014 | |
Grazvydas Ignotas | 120d074 | 2010-10-10 13:52:22 -0500 | [diff] [blame] | 1015 | musb_writeb(musb->mregs, MUSB_DEVCTL, 0); |
| 1016 | musb_platform_exit(musb); |
Grazvydas Ignotas | 120d074 | 2010-10-10 13:52:22 -0500 | [diff] [blame] | 1017 | |
Hema HK | 4f9edd2 | 2011-03-22 16:02:12 +0530 | [diff] [blame] | 1018 | pm_runtime_put(musb->controller); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1019 | /* FIXME power down */ |
| 1020 | } |
| 1021 | |
| 1022 | |
| 1023 | /*-------------------------------------------------------------------------*/ |
| 1024 | |
| 1025 | /* |
| 1026 | * The silicon either has hard-wired endpoint configurations, or else |
| 1027 | * "dynamic fifo" sizing. The driver has support for both, though at this |
David Brownell | c767c1c | 2008-09-11 11:53:23 +0300 | [diff] [blame] | 1028 | * writing only the dynamic sizing is very well tested. Since we switched |
| 1029 | * away from compile-time hardware parameters, we can no longer rely on |
| 1030 | * dead code elimination to leave only the relevant one in the object file. |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1031 | * |
| 1032 | * We don't currently use dynamic fifo setup capability to do anything |
| 1033 | * more than selecting one of a bunch of predefined configurations. |
| 1034 | */ |
Felipe Balbi | ee34e51 | 2011-06-29 12:45:03 +0300 | [diff] [blame] | 1035 | #if defined(CONFIG_USB_MUSB_TUSB6010) \ |
| 1036 | || defined(CONFIG_USB_MUSB_TUSB6010_MODULE) \ |
| 1037 | || defined(CONFIG_USB_MUSB_OMAP2PLUS) \ |
| 1038 | || defined(CONFIG_USB_MUSB_OMAP2PLUS_MODULE) \ |
| 1039 | || defined(CONFIG_USB_MUSB_AM35X) \ |
Ajay Kumar Gupta | 9ecb887 | 2012-03-12 19:30:22 +0530 | [diff] [blame] | 1040 | || defined(CONFIG_USB_MUSB_AM35X_MODULE) \ |
| 1041 | || defined(CONFIG_USB_MUSB_DSPS) \ |
| 1042 | || defined(CONFIG_USB_MUSB_DSPS_MODULE) |
Bill Pemberton | d3608b6 | 2012-11-19 13:24:34 -0500 | [diff] [blame] | 1043 | static ushort fifo_mode = 4; |
Felipe Balbi | ee34e51 | 2011-06-29 12:45:03 +0300 | [diff] [blame] | 1044 | #elif defined(CONFIG_USB_MUSB_UX500) \ |
| 1045 | || defined(CONFIG_USB_MUSB_UX500_MODULE) |
Bill Pemberton | d3608b6 | 2012-11-19 13:24:34 -0500 | [diff] [blame] | 1046 | static ushort fifo_mode = 5; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1047 | #else |
Bill Pemberton | d3608b6 | 2012-11-19 13:24:34 -0500 | [diff] [blame] | 1048 | static ushort fifo_mode = 2; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1049 | #endif |
| 1050 | |
| 1051 | /* "modprobe ... fifo_mode=1" etc */ |
| 1052 | module_param(fifo_mode, ushort, 0); |
| 1053 | MODULE_PARM_DESC(fifo_mode, "initial endpoint configuration"); |
| 1054 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1055 | /* |
| 1056 | * tables defining fifo_mode values. define more if you like. |
| 1057 | * for host side, make sure both halves of ep1 are set up. |
| 1058 | */ |
| 1059 | |
| 1060 | /* mode 0 - fits in 2KB */ |
Bill Pemberton | d3608b6 | 2012-11-19 13:24:34 -0500 | [diff] [blame] | 1061 | static struct musb_fifo_cfg mode_0_cfg[] = { |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1062 | { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, |
| 1063 | { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, |
| 1064 | { .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, }, |
| 1065 | { .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, }, |
| 1066 | { .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, }, |
| 1067 | }; |
| 1068 | |
| 1069 | /* mode 1 - fits in 4KB */ |
Bill Pemberton | d3608b6 | 2012-11-19 13:24:34 -0500 | [diff] [blame] | 1070 | static struct musb_fifo_cfg mode_1_cfg[] = { |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1071 | { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, .mode = BUF_DOUBLE, }, |
| 1072 | { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, .mode = BUF_DOUBLE, }, |
| 1073 | { .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, .mode = BUF_DOUBLE, }, |
| 1074 | { .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, }, |
| 1075 | { .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, }, |
| 1076 | }; |
| 1077 | |
| 1078 | /* mode 2 - fits in 4KB */ |
Bill Pemberton | d3608b6 | 2012-11-19 13:24:34 -0500 | [diff] [blame] | 1079 | static struct musb_fifo_cfg mode_2_cfg[] = { |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1080 | { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, |
| 1081 | { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, |
| 1082 | { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, }, |
| 1083 | { .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, }, |
| 1084 | { .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, }, |
| 1085 | { .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, }, |
| 1086 | }; |
| 1087 | |
| 1088 | /* mode 3 - fits in 4KB */ |
Bill Pemberton | d3608b6 | 2012-11-19 13:24:34 -0500 | [diff] [blame] | 1089 | static struct musb_fifo_cfg mode_3_cfg[] = { |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1090 | { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, .mode = BUF_DOUBLE, }, |
| 1091 | { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, .mode = BUF_DOUBLE, }, |
| 1092 | { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, }, |
| 1093 | { .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, }, |
| 1094 | { .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, }, |
| 1095 | { .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, }, |
| 1096 | }; |
| 1097 | |
| 1098 | /* mode 4 - fits in 16KB */ |
Bill Pemberton | d3608b6 | 2012-11-19 13:24:34 -0500 | [diff] [blame] | 1099 | static struct musb_fifo_cfg mode_4_cfg[] = { |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1100 | { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, |
| 1101 | { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, |
| 1102 | { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, }, |
| 1103 | { .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, }, |
| 1104 | { .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, }, |
| 1105 | { .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, }, |
| 1106 | { .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 512, }, |
| 1107 | { .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 512, }, |
| 1108 | { .hw_ep_num = 5, .style = FIFO_TX, .maxpacket = 512, }, |
| 1109 | { .hw_ep_num = 5, .style = FIFO_RX, .maxpacket = 512, }, |
| 1110 | { .hw_ep_num = 6, .style = FIFO_TX, .maxpacket = 512, }, |
| 1111 | { .hw_ep_num = 6, .style = FIFO_RX, .maxpacket = 512, }, |
| 1112 | { .hw_ep_num = 7, .style = FIFO_TX, .maxpacket = 512, }, |
| 1113 | { .hw_ep_num = 7, .style = FIFO_RX, .maxpacket = 512, }, |
| 1114 | { .hw_ep_num = 8, .style = FIFO_TX, .maxpacket = 512, }, |
| 1115 | { .hw_ep_num = 8, .style = FIFO_RX, .maxpacket = 512, }, |
| 1116 | { .hw_ep_num = 9, .style = FIFO_TX, .maxpacket = 512, }, |
| 1117 | { .hw_ep_num = 9, .style = FIFO_RX, .maxpacket = 512, }, |
Ajay Kumar Gupta | a483d70 | 2009-04-03 16:16:17 -0700 | [diff] [blame] | 1118 | { .hw_ep_num = 10, .style = FIFO_TX, .maxpacket = 256, }, |
| 1119 | { .hw_ep_num = 10, .style = FIFO_RX, .maxpacket = 64, }, |
| 1120 | { .hw_ep_num = 11, .style = FIFO_TX, .maxpacket = 256, }, |
| 1121 | { .hw_ep_num = 11, .style = FIFO_RX, .maxpacket = 64, }, |
| 1122 | { .hw_ep_num = 12, .style = FIFO_TX, .maxpacket = 256, }, |
| 1123 | { .hw_ep_num = 12, .style = FIFO_RX, .maxpacket = 64, }, |
| 1124 | { .hw_ep_num = 13, .style = FIFO_RXTX, .maxpacket = 4096, }, |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1125 | { .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, }, |
| 1126 | { .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, }, |
| 1127 | }; |
| 1128 | |
Ajay Kumar Gupta | 3b15152 | 2009-12-28 13:40:34 +0200 | [diff] [blame] | 1129 | /* mode 5 - fits in 8KB */ |
Bill Pemberton | d3608b6 | 2012-11-19 13:24:34 -0500 | [diff] [blame] | 1130 | static struct musb_fifo_cfg mode_5_cfg[] = { |
Ajay Kumar Gupta | 3b15152 | 2009-12-28 13:40:34 +0200 | [diff] [blame] | 1131 | { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, |
| 1132 | { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, |
| 1133 | { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, }, |
| 1134 | { .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, }, |
| 1135 | { .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, }, |
| 1136 | { .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, }, |
| 1137 | { .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 512, }, |
| 1138 | { .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 512, }, |
| 1139 | { .hw_ep_num = 5, .style = FIFO_TX, .maxpacket = 512, }, |
| 1140 | { .hw_ep_num = 5, .style = FIFO_RX, .maxpacket = 512, }, |
| 1141 | { .hw_ep_num = 6, .style = FIFO_TX, .maxpacket = 32, }, |
| 1142 | { .hw_ep_num = 6, .style = FIFO_RX, .maxpacket = 32, }, |
| 1143 | { .hw_ep_num = 7, .style = FIFO_TX, .maxpacket = 32, }, |
| 1144 | { .hw_ep_num = 7, .style = FIFO_RX, .maxpacket = 32, }, |
| 1145 | { .hw_ep_num = 8, .style = FIFO_TX, .maxpacket = 32, }, |
| 1146 | { .hw_ep_num = 8, .style = FIFO_RX, .maxpacket = 32, }, |
| 1147 | { .hw_ep_num = 9, .style = FIFO_TX, .maxpacket = 32, }, |
| 1148 | { .hw_ep_num = 9, .style = FIFO_RX, .maxpacket = 32, }, |
| 1149 | { .hw_ep_num = 10, .style = FIFO_TX, .maxpacket = 32, }, |
| 1150 | { .hw_ep_num = 10, .style = FIFO_RX, .maxpacket = 32, }, |
| 1151 | { .hw_ep_num = 11, .style = FIFO_TX, .maxpacket = 32, }, |
| 1152 | { .hw_ep_num = 11, .style = FIFO_RX, .maxpacket = 32, }, |
| 1153 | { .hw_ep_num = 12, .style = FIFO_TX, .maxpacket = 32, }, |
| 1154 | { .hw_ep_num = 12, .style = FIFO_RX, .maxpacket = 32, }, |
| 1155 | { .hw_ep_num = 13, .style = FIFO_RXTX, .maxpacket = 512, }, |
| 1156 | { .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, }, |
| 1157 | { .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, }, |
| 1158 | }; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1159 | |
| 1160 | /* |
| 1161 | * configure a fifo; for non-shared endpoints, this may be called |
| 1162 | * once for a tx fifo and once for an rx fifo. |
| 1163 | * |
| 1164 | * returns negative errno or offset for next fifo. |
| 1165 | */ |
Bill Pemberton | 41ac7b3 | 2012-11-19 13:21:48 -0500 | [diff] [blame] | 1166 | static int |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1167 | fifo_setup(struct musb *musb, struct musb_hw_ep *hw_ep, |
Felipe Balbi | e6c213b | 2010-03-12 10:29:06 +0200 | [diff] [blame] | 1168 | const struct musb_fifo_cfg *cfg, u16 offset) |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1169 | { |
| 1170 | void __iomem *mbase = musb->mregs; |
| 1171 | int size = 0; |
| 1172 | u16 maxpacket = cfg->maxpacket; |
| 1173 | u16 c_off = offset >> 3; |
| 1174 | u8 c_size; |
| 1175 | |
| 1176 | /* expect hw_ep has already been zero-initialized */ |
| 1177 | |
| 1178 | size = ffs(max(maxpacket, (u16) 8)) - 1; |
| 1179 | maxpacket = 1 << size; |
| 1180 | |
| 1181 | c_size = size - 3; |
| 1182 | if (cfg->mode == BUF_DOUBLE) { |
Felipe Balbi | ca6d1b1 | 2008-08-08 12:40:54 +0300 | [diff] [blame] | 1183 | if ((offset + (maxpacket << 1)) > |
| 1184 | (1 << (musb->config->ram_bits + 2))) |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1185 | return -EMSGSIZE; |
| 1186 | c_size |= MUSB_FIFOSZ_DPB; |
| 1187 | } else { |
Felipe Balbi | ca6d1b1 | 2008-08-08 12:40:54 +0300 | [diff] [blame] | 1188 | if ((offset + maxpacket) > (1 << (musb->config->ram_bits + 2))) |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1189 | return -EMSGSIZE; |
| 1190 | } |
| 1191 | |
| 1192 | /* configure the FIFO */ |
| 1193 | musb_writeb(mbase, MUSB_INDEX, hw_ep->epnum); |
| 1194 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1195 | /* EP0 reserved endpoint for control, bidirectional; |
| 1196 | * EP1 reserved for bulk, two unidirection halves. |
| 1197 | */ |
| 1198 | if (hw_ep->epnum == 1) |
| 1199 | musb->bulk_ep = hw_ep; |
| 1200 | /* REVISIT error check: be sure ep0 can both rx and tx ... */ |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1201 | switch (cfg->style) { |
| 1202 | case FIFO_TX: |
Bryan Wu | c6cf8b0 | 2008-12-02 21:33:48 +0200 | [diff] [blame] | 1203 | musb_write_txfifosz(mbase, c_size); |
| 1204 | musb_write_txfifoadd(mbase, c_off); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1205 | hw_ep->tx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB); |
| 1206 | hw_ep->max_packet_sz_tx = maxpacket; |
| 1207 | break; |
| 1208 | case FIFO_RX: |
Bryan Wu | c6cf8b0 | 2008-12-02 21:33:48 +0200 | [diff] [blame] | 1209 | musb_write_rxfifosz(mbase, c_size); |
| 1210 | musb_write_rxfifoadd(mbase, c_off); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1211 | hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB); |
| 1212 | hw_ep->max_packet_sz_rx = maxpacket; |
| 1213 | break; |
| 1214 | case FIFO_RXTX: |
Bryan Wu | c6cf8b0 | 2008-12-02 21:33:48 +0200 | [diff] [blame] | 1215 | musb_write_txfifosz(mbase, c_size); |
| 1216 | musb_write_txfifoadd(mbase, c_off); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1217 | hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB); |
| 1218 | hw_ep->max_packet_sz_rx = maxpacket; |
| 1219 | |
Bryan Wu | c6cf8b0 | 2008-12-02 21:33:48 +0200 | [diff] [blame] | 1220 | musb_write_rxfifosz(mbase, c_size); |
| 1221 | musb_write_rxfifoadd(mbase, c_off); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1222 | hw_ep->tx_double_buffered = hw_ep->rx_double_buffered; |
| 1223 | hw_ep->max_packet_sz_tx = maxpacket; |
| 1224 | |
| 1225 | hw_ep->is_shared_fifo = true; |
| 1226 | break; |
| 1227 | } |
| 1228 | |
| 1229 | /* NOTE rx and tx endpoint irqs aren't managed separately, |
| 1230 | * which happens to be ok |
| 1231 | */ |
| 1232 | musb->epmask |= (1 << hw_ep->epnum); |
| 1233 | |
| 1234 | return offset + (maxpacket << ((c_size & MUSB_FIFOSZ_DPB) ? 1 : 0)); |
| 1235 | } |
| 1236 | |
Bill Pemberton | d3608b6 | 2012-11-19 13:24:34 -0500 | [diff] [blame] | 1237 | static struct musb_fifo_cfg ep0_cfg = { |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1238 | .style = FIFO_RXTX, .maxpacket = 64, |
| 1239 | }; |
| 1240 | |
Bill Pemberton | 41ac7b3 | 2012-11-19 13:21:48 -0500 | [diff] [blame] | 1241 | static int ep_config_from_table(struct musb *musb) |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1242 | { |
Felipe Balbi | e6c213b | 2010-03-12 10:29:06 +0200 | [diff] [blame] | 1243 | const struct musb_fifo_cfg *cfg; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1244 | unsigned i, n; |
| 1245 | int offset; |
| 1246 | struct musb_hw_ep *hw_ep = musb->endpoints; |
| 1247 | |
Felipe Balbi | e6c213b | 2010-03-12 10:29:06 +0200 | [diff] [blame] | 1248 | if (musb->config->fifo_cfg) { |
| 1249 | cfg = musb->config->fifo_cfg; |
| 1250 | n = musb->config->fifo_cfg_size; |
| 1251 | goto done; |
| 1252 | } |
| 1253 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1254 | switch (fifo_mode) { |
| 1255 | default: |
| 1256 | fifo_mode = 0; |
| 1257 | /* FALLTHROUGH */ |
| 1258 | case 0: |
| 1259 | cfg = mode_0_cfg; |
| 1260 | n = ARRAY_SIZE(mode_0_cfg); |
| 1261 | break; |
| 1262 | case 1: |
| 1263 | cfg = mode_1_cfg; |
| 1264 | n = ARRAY_SIZE(mode_1_cfg); |
| 1265 | break; |
| 1266 | case 2: |
| 1267 | cfg = mode_2_cfg; |
| 1268 | n = ARRAY_SIZE(mode_2_cfg); |
| 1269 | break; |
| 1270 | case 3: |
| 1271 | cfg = mode_3_cfg; |
| 1272 | n = ARRAY_SIZE(mode_3_cfg); |
| 1273 | break; |
| 1274 | case 4: |
| 1275 | cfg = mode_4_cfg; |
| 1276 | n = ARRAY_SIZE(mode_4_cfg); |
| 1277 | break; |
Ajay Kumar Gupta | 3b15152 | 2009-12-28 13:40:34 +0200 | [diff] [blame] | 1278 | case 5: |
| 1279 | cfg = mode_5_cfg; |
| 1280 | n = ARRAY_SIZE(mode_5_cfg); |
| 1281 | break; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1282 | } |
| 1283 | |
| 1284 | printk(KERN_DEBUG "%s: setup fifo_mode %d\n", |
| 1285 | musb_driver_name, fifo_mode); |
| 1286 | |
| 1287 | |
Felipe Balbi | e6c213b | 2010-03-12 10:29:06 +0200 | [diff] [blame] | 1288 | done: |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1289 | offset = fifo_setup(musb, hw_ep, &ep0_cfg, 0); |
| 1290 | /* assert(offset > 0) */ |
| 1291 | |
| 1292 | /* NOTE: for RTL versions >= 1.400 EPINFO and RAMINFO would |
Felipe Balbi | ca6d1b1 | 2008-08-08 12:40:54 +0300 | [diff] [blame] | 1293 | * be better than static musb->config->num_eps and DYN_FIFO_SIZE... |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1294 | */ |
| 1295 | |
| 1296 | for (i = 0; i < n; i++) { |
| 1297 | u8 epn = cfg->hw_ep_num; |
| 1298 | |
Felipe Balbi | ca6d1b1 | 2008-08-08 12:40:54 +0300 | [diff] [blame] | 1299 | if (epn >= musb->config->num_eps) { |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1300 | pr_debug("%s: invalid ep %d\n", |
| 1301 | musb_driver_name, epn); |
David Brownell | bb1c9ef | 2008-11-24 13:06:50 +0200 | [diff] [blame] | 1302 | return -EINVAL; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1303 | } |
| 1304 | offset = fifo_setup(musb, hw_ep + epn, cfg++, offset); |
| 1305 | if (offset < 0) { |
| 1306 | pr_debug("%s: mem overrun, ep %d\n", |
| 1307 | musb_driver_name, epn); |
Shubhrajyoti D | f69dfa1 | 2012-08-07 19:56:31 +0530 | [diff] [blame] | 1308 | return offset; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1309 | } |
| 1310 | epn++; |
| 1311 | musb->nr_endpoints = max(epn, musb->nr_endpoints); |
| 1312 | } |
| 1313 | |
| 1314 | printk(KERN_DEBUG "%s: %d/%d max ep, %d/%d memory\n", |
| 1315 | musb_driver_name, |
Felipe Balbi | ca6d1b1 | 2008-08-08 12:40:54 +0300 | [diff] [blame] | 1316 | n + 1, musb->config->num_eps * 2 - 1, |
| 1317 | offset, (1 << (musb->config->ram_bits + 2))); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1318 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1319 | if (!musb->bulk_ep) { |
| 1320 | pr_debug("%s: missing bulk\n", musb_driver_name); |
| 1321 | return -EINVAL; |
| 1322 | } |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1323 | |
| 1324 | return 0; |
| 1325 | } |
| 1326 | |
| 1327 | |
| 1328 | /* |
| 1329 | * ep_config_from_hw - when MUSB_C_DYNFIFO_DEF is false |
| 1330 | * @param musb the controller |
| 1331 | */ |
Bill Pemberton | 41ac7b3 | 2012-11-19 13:21:48 -0500 | [diff] [blame] | 1332 | static int ep_config_from_hw(struct musb *musb) |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1333 | { |
Bryan Wu | c6cf8b0 | 2008-12-02 21:33:48 +0200 | [diff] [blame] | 1334 | u8 epnum = 0; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1335 | struct musb_hw_ep *hw_ep; |
Felipe Balbi | a156544 | 2012-08-07 14:00:50 +0300 | [diff] [blame] | 1336 | void __iomem *mbase = musb->mregs; |
Bryan Wu | c6cf8b0 | 2008-12-02 21:33:48 +0200 | [diff] [blame] | 1337 | int ret = 0; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1338 | |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 1339 | dev_dbg(musb->controller, "<== static silicon ep config\n"); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1340 | |
| 1341 | /* FIXME pick up ep0 maxpacket size */ |
| 1342 | |
Felipe Balbi | ca6d1b1 | 2008-08-08 12:40:54 +0300 | [diff] [blame] | 1343 | for (epnum = 1; epnum < musb->config->num_eps; epnum++) { |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1344 | musb_ep_select(mbase, epnum); |
| 1345 | hw_ep = musb->endpoints + epnum; |
| 1346 | |
Bryan Wu | c6cf8b0 | 2008-12-02 21:33:48 +0200 | [diff] [blame] | 1347 | ret = musb_read_fifosize(musb, hw_ep, epnum); |
| 1348 | if (ret < 0) |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1349 | break; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1350 | |
| 1351 | /* FIXME set up hw_ep->{rx,tx}_double_buffered */ |
| 1352 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1353 | /* pick an RX/TX endpoint for bulk */ |
| 1354 | if (hw_ep->max_packet_sz_tx < 512 |
| 1355 | || hw_ep->max_packet_sz_rx < 512) |
| 1356 | continue; |
| 1357 | |
| 1358 | /* REVISIT: this algorithm is lazy, we should at least |
| 1359 | * try to pick a double buffered endpoint. |
| 1360 | */ |
| 1361 | if (musb->bulk_ep) |
| 1362 | continue; |
| 1363 | musb->bulk_ep = hw_ep; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1364 | } |
| 1365 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1366 | if (!musb->bulk_ep) { |
| 1367 | pr_debug("%s: missing bulk\n", musb_driver_name); |
| 1368 | return -EINVAL; |
| 1369 | } |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1370 | |
| 1371 | return 0; |
| 1372 | } |
| 1373 | |
| 1374 | enum { MUSB_CONTROLLER_MHDRC, MUSB_CONTROLLER_HDRC, }; |
| 1375 | |
| 1376 | /* Initialize MUSB (M)HDRC part of the USB hardware subsystem; |
| 1377 | * configure endpoints, or take their config from silicon |
| 1378 | */ |
Bill Pemberton | 41ac7b3 | 2012-11-19 13:21:48 -0500 | [diff] [blame] | 1379 | static int musb_core_init(u16 musb_type, struct musb *musb) |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1380 | { |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1381 | u8 reg; |
| 1382 | char *type; |
Maulik Mankad | 0ea52ff | 2009-12-22 16:19:53 +0530 | [diff] [blame] | 1383 | char aInfo[90], aRevision[32], aDate[12]; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1384 | void __iomem *mbase = musb->mregs; |
| 1385 | int status = 0; |
| 1386 | int i; |
| 1387 | |
| 1388 | /* log core options (read using indexed model) */ |
Bryan Wu | c6cf8b0 | 2008-12-02 21:33:48 +0200 | [diff] [blame] | 1389 | reg = musb_read_configdata(mbase); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1390 | |
| 1391 | strcpy(aInfo, (reg & MUSB_CONFIGDATA_UTMIDW) ? "UTMI-16" : "UTMI-8"); |
Ajay Kumar Gupta | 51bf0d0 | 2009-12-28 13:40:41 +0200 | [diff] [blame] | 1392 | if (reg & MUSB_CONFIGDATA_DYNFIFO) { |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1393 | strcat(aInfo, ", dyn FIFOs"); |
Ajay Kumar Gupta | 51bf0d0 | 2009-12-28 13:40:41 +0200 | [diff] [blame] | 1394 | musb->dyn_fifo = true; |
| 1395 | } |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1396 | if (reg & MUSB_CONFIGDATA_MPRXE) { |
| 1397 | strcat(aInfo, ", bulk combine"); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1398 | musb->bulk_combine = true; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1399 | } |
| 1400 | if (reg & MUSB_CONFIGDATA_MPTXE) { |
| 1401 | strcat(aInfo, ", bulk split"); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1402 | musb->bulk_split = true; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1403 | } |
| 1404 | if (reg & MUSB_CONFIGDATA_HBRXE) { |
| 1405 | strcat(aInfo, ", HB-ISO Rx"); |
Ajay Kumar Gupta | a483d70 | 2009-04-03 16:16:17 -0700 | [diff] [blame] | 1406 | musb->hb_iso_rx = true; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1407 | } |
| 1408 | if (reg & MUSB_CONFIGDATA_HBTXE) { |
| 1409 | strcat(aInfo, ", HB-ISO Tx"); |
Ajay Kumar Gupta | a483d70 | 2009-04-03 16:16:17 -0700 | [diff] [blame] | 1410 | musb->hb_iso_tx = true; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1411 | } |
| 1412 | if (reg & MUSB_CONFIGDATA_SOFTCONE) |
| 1413 | strcat(aInfo, ", SoftConn"); |
| 1414 | |
| 1415 | printk(KERN_DEBUG "%s: ConfigData=0x%02x (%s)\n", |
| 1416 | musb_driver_name, reg, aInfo); |
| 1417 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1418 | aDate[0] = 0; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1419 | if (MUSB_CONTROLLER_MHDRC == musb_type) { |
| 1420 | musb->is_multipoint = 1; |
| 1421 | type = "M"; |
| 1422 | } else { |
| 1423 | musb->is_multipoint = 0; |
| 1424 | type = ""; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1425 | #ifndef CONFIG_USB_OTG_BLACKLIST_HUB |
| 1426 | printk(KERN_ERR |
| 1427 | "%s: kernel must blacklist external hubs\n", |
| 1428 | musb_driver_name); |
| 1429 | #endif |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1430 | } |
| 1431 | |
| 1432 | /* log release info */ |
Anand Gadiyar | 32c3b94 | 2009-11-16 21:09:21 +0530 | [diff] [blame] | 1433 | musb->hwvers = musb_read_hwvers(mbase); |
| 1434 | snprintf(aRevision, 32, "%d.%d%s", MUSB_HWVERS_MAJOR(musb->hwvers), |
| 1435 | MUSB_HWVERS_MINOR(musb->hwvers), |
| 1436 | (musb->hwvers & MUSB_HWVERS_RC) ? "RC" : ""); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1437 | printk(KERN_DEBUG "%s: %sHDRC RTL version %s %s\n", |
| 1438 | musb_driver_name, type, aRevision, aDate); |
| 1439 | |
| 1440 | /* configure ep0 */ |
Bryan Wu | c6cf8b0 | 2008-12-02 21:33:48 +0200 | [diff] [blame] | 1441 | musb_configure_ep0(musb); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1442 | |
| 1443 | /* discover endpoint configuration */ |
| 1444 | musb->nr_endpoints = 1; |
| 1445 | musb->epmask = 1; |
| 1446 | |
Felipe Balbi | ad517e9e | 2010-01-21 15:33:54 +0200 | [diff] [blame] | 1447 | if (musb->dyn_fifo) |
| 1448 | status = ep_config_from_table(musb); |
| 1449 | else |
| 1450 | status = ep_config_from_hw(musb); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1451 | |
| 1452 | if (status < 0) |
| 1453 | return status; |
| 1454 | |
| 1455 | /* finish init, and print endpoint config */ |
| 1456 | for (i = 0; i < musb->nr_endpoints; i++) { |
| 1457 | struct musb_hw_ep *hw_ep = musb->endpoints + i; |
| 1458 | |
| 1459 | hw_ep->fifo = MUSB_FIFO_OFFSET(i) + mbase; |
Arnd Bergmann | 9a35f87 | 2011-10-02 16:45:47 +0200 | [diff] [blame] | 1460 | #if defined(CONFIG_USB_MUSB_TUSB6010) || defined (CONFIG_USB_MUSB_TUSB6010_MODULE) |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1461 | hw_ep->fifo_async = musb->async + 0x400 + MUSB_FIFO_OFFSET(i); |
| 1462 | hw_ep->fifo_sync = musb->sync + 0x400 + MUSB_FIFO_OFFSET(i); |
| 1463 | hw_ep->fifo_sync_va = |
| 1464 | musb->sync_va + 0x400 + MUSB_FIFO_OFFSET(i); |
| 1465 | |
| 1466 | if (i == 0) |
| 1467 | hw_ep->conf = mbase - 0x400 + TUSB_EP0_CONF; |
| 1468 | else |
| 1469 | hw_ep->conf = mbase + 0x400 + (((i - 1) & 0xf) << 2); |
| 1470 | #endif |
| 1471 | |
| 1472 | hw_ep->regs = MUSB_EP_OFFSET(i, 0) + mbase; |
Bryan Wu | c6cf8b0 | 2008-12-02 21:33:48 +0200 | [diff] [blame] | 1473 | hw_ep->target_regs = musb_read_target_reg_base(i, mbase); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1474 | hw_ep->rx_reinit = 1; |
| 1475 | hw_ep->tx_reinit = 1; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1476 | |
| 1477 | if (hw_ep->max_packet_sz_tx) { |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 1478 | dev_dbg(musb->controller, |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1479 | "%s: hw_ep %d%s, %smax %d\n", |
| 1480 | musb_driver_name, i, |
| 1481 | hw_ep->is_shared_fifo ? "shared" : "tx", |
| 1482 | hw_ep->tx_double_buffered |
| 1483 | ? "doublebuffer, " : "", |
| 1484 | hw_ep->max_packet_sz_tx); |
| 1485 | } |
| 1486 | if (hw_ep->max_packet_sz_rx && !hw_ep->is_shared_fifo) { |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 1487 | dev_dbg(musb->controller, |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1488 | "%s: hw_ep %d%s, %smax %d\n", |
| 1489 | musb_driver_name, i, |
| 1490 | "rx", |
| 1491 | hw_ep->rx_double_buffered |
| 1492 | ? "doublebuffer, " : "", |
| 1493 | hw_ep->max_packet_sz_rx); |
| 1494 | } |
| 1495 | if (!(hw_ep->max_packet_sz_tx || hw_ep->max_packet_sz_rx)) |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 1496 | dev_dbg(musb->controller, "hw_ep %d not configured\n", i); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1497 | } |
| 1498 | |
| 1499 | return 0; |
| 1500 | } |
| 1501 | |
| 1502 | /*-------------------------------------------------------------------------*/ |
| 1503 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1504 | /* |
| 1505 | * handle all the irqs defined by the HDRC core. for now we expect: other |
| 1506 | * irq sources (phy, dma, etc) will be handled first, musb->int_* values |
| 1507 | * will be assigned, and the irq will already have been acked. |
| 1508 | * |
| 1509 | * called in irq context with spinlock held, irqs blocked |
| 1510 | */ |
| 1511 | irqreturn_t musb_interrupt(struct musb *musb) |
| 1512 | { |
| 1513 | irqreturn_t retval = IRQ_NONE; |
Sebastian Andrzej Siewior | b11e94d | 2012-10-30 19:52:23 +0100 | [diff] [blame] | 1514 | u8 devctl; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1515 | int ep_num; |
| 1516 | u32 reg; |
| 1517 | |
| 1518 | devctl = musb_readb(musb->mregs, MUSB_DEVCTL); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1519 | |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 1520 | dev_dbg(musb->controller, "** IRQ %s usb%04x tx%04x rx%04x\n", |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1521 | (devctl & MUSB_DEVCTL_HM) ? "host" : "peripheral", |
| 1522 | musb->int_usb, musb->int_tx, musb->int_rx); |
| 1523 | |
| 1524 | /* the core can interrupt us for multiple reasons; docs have |
| 1525 | * a generic interrupt flowchart to follow |
| 1526 | */ |
Sergei Shtylyov | 7d9645f | 2010-06-24 23:07:06 +0530 | [diff] [blame] | 1527 | if (musb->int_usb) |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1528 | retval |= musb_stage0_irq(musb, musb->int_usb, |
Sebastian Andrzej Siewior | b11e94d | 2012-10-30 19:52:23 +0100 | [diff] [blame] | 1529 | devctl); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1530 | |
| 1531 | /* "stage 1" is handling endpoint irqs */ |
| 1532 | |
| 1533 | /* handle endpoint 0 first */ |
| 1534 | if (musb->int_tx & 1) { |
| 1535 | if (devctl & MUSB_DEVCTL_HM) |
| 1536 | retval |= musb_h_ep0_irq(musb); |
| 1537 | else |
| 1538 | retval |= musb_g_ep0_irq(musb); |
| 1539 | } |
| 1540 | |
| 1541 | /* RX on endpoints 1-15 */ |
| 1542 | reg = musb->int_rx >> 1; |
| 1543 | ep_num = 1; |
| 1544 | while (reg) { |
| 1545 | if (reg & 1) { |
| 1546 | /* musb_ep_select(musb->mregs, ep_num); */ |
| 1547 | /* REVISIT just retval = ep->rx_irq(...) */ |
| 1548 | retval = IRQ_HANDLED; |
Felipe Balbi | a04d46d | 2011-11-24 15:46:27 +0200 | [diff] [blame] | 1549 | if (devctl & MUSB_DEVCTL_HM) |
| 1550 | musb_host_rx(musb, ep_num); |
| 1551 | else |
| 1552 | musb_g_rx(musb, ep_num); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1553 | } |
| 1554 | |
| 1555 | reg >>= 1; |
| 1556 | ep_num++; |
| 1557 | } |
| 1558 | |
| 1559 | /* TX on endpoints 1-15 */ |
| 1560 | reg = musb->int_tx >> 1; |
| 1561 | ep_num = 1; |
| 1562 | while (reg) { |
| 1563 | if (reg & 1) { |
| 1564 | /* musb_ep_select(musb->mregs, ep_num); */ |
| 1565 | /* REVISIT just retval |= ep->tx_irq(...) */ |
| 1566 | retval = IRQ_HANDLED; |
Felipe Balbi | a04d46d | 2011-11-24 15:46:27 +0200 | [diff] [blame] | 1567 | if (devctl & MUSB_DEVCTL_HM) |
| 1568 | musb_host_tx(musb, ep_num); |
| 1569 | else |
| 1570 | musb_g_tx(musb, ep_num); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1571 | } |
| 1572 | reg >>= 1; |
| 1573 | ep_num++; |
| 1574 | } |
| 1575 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1576 | return retval; |
| 1577 | } |
Felipe Balbi | 981430a | 2011-05-11 13:02:23 +0300 | [diff] [blame] | 1578 | EXPORT_SYMBOL_GPL(musb_interrupt); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1579 | |
| 1580 | #ifndef CONFIG_MUSB_PIO_ONLY |
Bill Pemberton | d3608b6 | 2012-11-19 13:24:34 -0500 | [diff] [blame] | 1581 | static bool use_dma = 1; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1582 | |
| 1583 | /* "modprobe ... use_dma=0" etc */ |
| 1584 | module_param(use_dma, bool, 0); |
| 1585 | MODULE_PARM_DESC(use_dma, "enable/disable use of DMA"); |
| 1586 | |
| 1587 | void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit) |
| 1588 | { |
| 1589 | u8 devctl = musb_readb(musb->mregs, MUSB_DEVCTL); |
| 1590 | |
| 1591 | /* called with controller lock already held */ |
| 1592 | |
| 1593 | if (!epnum) { |
| 1594 | #ifndef CONFIG_USB_TUSB_OMAP_DMA |
| 1595 | if (!is_cppi_enabled()) { |
| 1596 | /* endpoint 0 */ |
| 1597 | if (devctl & MUSB_DEVCTL_HM) |
| 1598 | musb_h_ep0_irq(musb); |
| 1599 | else |
| 1600 | musb_g_ep0_irq(musb); |
| 1601 | } |
| 1602 | #endif |
| 1603 | } else { |
| 1604 | /* endpoints 1..15 */ |
| 1605 | if (transmit) { |
Felipe Balbi | a04d46d | 2011-11-24 15:46:27 +0200 | [diff] [blame] | 1606 | if (devctl & MUSB_DEVCTL_HM) |
| 1607 | musb_host_tx(musb, epnum); |
| 1608 | else |
| 1609 | musb_g_tx(musb, epnum); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1610 | } else { |
| 1611 | /* receive */ |
Felipe Balbi | a04d46d | 2011-11-24 15:46:27 +0200 | [diff] [blame] | 1612 | if (devctl & MUSB_DEVCTL_HM) |
| 1613 | musb_host_rx(musb, epnum); |
| 1614 | else |
| 1615 | musb_g_rx(musb, epnum); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1616 | } |
| 1617 | } |
| 1618 | } |
Arnd Bergmann | 9a35f87 | 2011-10-02 16:45:47 +0200 | [diff] [blame] | 1619 | EXPORT_SYMBOL_GPL(musb_dma_completion); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1620 | |
| 1621 | #else |
| 1622 | #define use_dma 0 |
| 1623 | #endif |
| 1624 | |
| 1625 | /*-------------------------------------------------------------------------*/ |
| 1626 | |
| 1627 | #ifdef CONFIG_SYSFS |
| 1628 | |
| 1629 | static ssize_t |
| 1630 | musb_mode_show(struct device *dev, struct device_attribute *attr, char *buf) |
| 1631 | { |
| 1632 | struct musb *musb = dev_to_musb(dev); |
| 1633 | unsigned long flags; |
| 1634 | int ret = -EINVAL; |
| 1635 | |
| 1636 | spin_lock_irqsave(&musb->lock, flags); |
Anatolij Gustschin | 3df0045 | 2011-05-05 12:11:21 +0200 | [diff] [blame] | 1637 | ret = sprintf(buf, "%s\n", otg_state_string(musb->xceiv->state)); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1638 | spin_unlock_irqrestore(&musb->lock, flags); |
| 1639 | |
| 1640 | return ret; |
| 1641 | } |
| 1642 | |
| 1643 | static ssize_t |
| 1644 | musb_mode_store(struct device *dev, struct device_attribute *attr, |
| 1645 | const char *buf, size_t n) |
| 1646 | { |
| 1647 | struct musb *musb = dev_to_musb(dev); |
| 1648 | unsigned long flags; |
David Brownell | 96a274d | 2008-11-24 13:06:47 +0200 | [diff] [blame] | 1649 | int status; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1650 | |
| 1651 | spin_lock_irqsave(&musb->lock, flags); |
David Brownell | 96a274d | 2008-11-24 13:06:47 +0200 | [diff] [blame] | 1652 | if (sysfs_streq(buf, "host")) |
| 1653 | status = musb_platform_set_mode(musb, MUSB_HOST); |
| 1654 | else if (sysfs_streq(buf, "peripheral")) |
| 1655 | status = musb_platform_set_mode(musb, MUSB_PERIPHERAL); |
| 1656 | else if (sysfs_streq(buf, "otg")) |
| 1657 | status = musb_platform_set_mode(musb, MUSB_OTG); |
| 1658 | else |
| 1659 | status = -EINVAL; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1660 | spin_unlock_irqrestore(&musb->lock, flags); |
| 1661 | |
David Brownell | 96a274d | 2008-11-24 13:06:47 +0200 | [diff] [blame] | 1662 | return (status == 0) ? n : status; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1663 | } |
| 1664 | static DEVICE_ATTR(mode, 0644, musb_mode_show, musb_mode_store); |
| 1665 | |
| 1666 | static ssize_t |
| 1667 | musb_vbus_store(struct device *dev, struct device_attribute *attr, |
| 1668 | const char *buf, size_t n) |
| 1669 | { |
| 1670 | struct musb *musb = dev_to_musb(dev); |
| 1671 | unsigned long flags; |
| 1672 | unsigned long val; |
| 1673 | |
| 1674 | if (sscanf(buf, "%lu", &val) < 1) { |
Felipe Balbi | b3b1cc3 | 2009-12-15 11:08:43 +0200 | [diff] [blame] | 1675 | dev_err(dev, "Invalid VBUS timeout ms value\n"); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1676 | return -EINVAL; |
| 1677 | } |
| 1678 | |
| 1679 | spin_lock_irqsave(&musb->lock, flags); |
David Brownell | f7f9d63 | 2009-03-31 12:32:12 -0700 | [diff] [blame] | 1680 | /* force T(a_wait_bcon) to be zero/unlimited *OR* valid */ |
| 1681 | musb->a_wait_bcon = val ? max_t(int, val, OTG_TIME_A_WAIT_BCON) : 0 ; |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 1682 | if (musb->xceiv->state == OTG_STATE_A_WAIT_BCON) |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1683 | musb->is_active = 0; |
| 1684 | musb_platform_try_idle(musb, jiffies + msecs_to_jiffies(val)); |
| 1685 | spin_unlock_irqrestore(&musb->lock, flags); |
| 1686 | |
| 1687 | return n; |
| 1688 | } |
| 1689 | |
| 1690 | static ssize_t |
| 1691 | musb_vbus_show(struct device *dev, struct device_attribute *attr, char *buf) |
| 1692 | { |
| 1693 | struct musb *musb = dev_to_musb(dev); |
| 1694 | unsigned long flags; |
| 1695 | unsigned long val; |
| 1696 | int vbus; |
| 1697 | |
| 1698 | spin_lock_irqsave(&musb->lock, flags); |
| 1699 | val = musb->a_wait_bcon; |
David Brownell | f7f9d63 | 2009-03-31 12:32:12 -0700 | [diff] [blame] | 1700 | /* FIXME get_vbus_status() is normally #defined as false... |
| 1701 | * and is effectively TUSB-specific. |
| 1702 | */ |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1703 | vbus = musb_platform_get_vbus_status(musb); |
| 1704 | spin_unlock_irqrestore(&musb->lock, flags); |
| 1705 | |
David Brownell | f7f9d63 | 2009-03-31 12:32:12 -0700 | [diff] [blame] | 1706 | return sprintf(buf, "Vbus %s, timeout %lu msec\n", |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1707 | vbus ? "on" : "off", val); |
| 1708 | } |
| 1709 | static DEVICE_ATTR(vbus, 0644, musb_vbus_show, musb_vbus_store); |
| 1710 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1711 | /* Gadget drivers can't know that a host is connected so they might want |
| 1712 | * to start SRP, but users can. This allows userspace to trigger SRP. |
| 1713 | */ |
| 1714 | static ssize_t |
| 1715 | musb_srp_store(struct device *dev, struct device_attribute *attr, |
| 1716 | const char *buf, size_t n) |
| 1717 | { |
| 1718 | struct musb *musb = dev_to_musb(dev); |
| 1719 | unsigned short srp; |
| 1720 | |
| 1721 | if (sscanf(buf, "%hu", &srp) != 1 |
| 1722 | || (srp != 1)) { |
Felipe Balbi | b3b1cc3 | 2009-12-15 11:08:43 +0200 | [diff] [blame] | 1723 | dev_err(dev, "SRP: Value must be 1\n"); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1724 | return -EINVAL; |
| 1725 | } |
| 1726 | |
| 1727 | if (srp == 1) |
| 1728 | musb_g_wakeup(musb); |
| 1729 | |
| 1730 | return n; |
| 1731 | } |
| 1732 | static DEVICE_ATTR(srp, 0644, NULL, musb_srp_store); |
| 1733 | |
Felipe Balbi | 9437575 | 2009-12-15 11:08:38 +0200 | [diff] [blame] | 1734 | static struct attribute *musb_attributes[] = { |
| 1735 | &dev_attr_mode.attr, |
| 1736 | &dev_attr_vbus.attr, |
Felipe Balbi | 9437575 | 2009-12-15 11:08:38 +0200 | [diff] [blame] | 1737 | &dev_attr_srp.attr, |
Felipe Balbi | 9437575 | 2009-12-15 11:08:38 +0200 | [diff] [blame] | 1738 | NULL |
| 1739 | }; |
| 1740 | |
| 1741 | static const struct attribute_group musb_attr_group = { |
| 1742 | .attrs = musb_attributes, |
| 1743 | }; |
| 1744 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1745 | #endif /* sysfs */ |
| 1746 | |
| 1747 | /* Only used to provide driver mode change events */ |
| 1748 | static void musb_irq_work(struct work_struct *data) |
| 1749 | { |
| 1750 | struct musb *musb = container_of(data, struct musb, irq_work); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1751 | |
Ajay Kumar Gupta | 8d2421e | 2012-08-31 11:09:50 +0000 | [diff] [blame] | 1752 | if (musb->xceiv->state != musb->xceiv_old_state) { |
| 1753 | musb->xceiv_old_state = musb->xceiv->state; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1754 | sysfs_notify(&musb->controller->kobj, NULL, "mode"); |
| 1755 | } |
| 1756 | } |
| 1757 | |
| 1758 | /* -------------------------------------------------------------------------- |
| 1759 | * Init support |
| 1760 | */ |
| 1761 | |
Bill Pemberton | 41ac7b3 | 2012-11-19 13:21:48 -0500 | [diff] [blame] | 1762 | static struct musb *allocate_instance(struct device *dev, |
Felipe Balbi | ca6d1b1 | 2008-08-08 12:40:54 +0300 | [diff] [blame] | 1763 | struct musb_hdrc_config *config, void __iomem *mbase) |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1764 | { |
| 1765 | struct musb *musb; |
| 1766 | struct musb_hw_ep *ep; |
| 1767 | int epnum; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1768 | struct usb_hcd *hcd; |
| 1769 | |
Kay Sievers | 427c4f3 | 2008-11-07 01:52:53 +0100 | [diff] [blame] | 1770 | hcd = usb_create_hcd(&musb_hc_driver, dev, dev_name(dev)); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1771 | if (!hcd) |
| 1772 | return NULL; |
| 1773 | /* usbcore sets dev->driver_data to hcd, and sometimes uses that... */ |
| 1774 | |
| 1775 | musb = hcd_to_musb(hcd); |
| 1776 | INIT_LIST_HEAD(&musb->control); |
| 1777 | INIT_LIST_HEAD(&musb->in_bulk); |
| 1778 | INIT_LIST_HEAD(&musb->out_bulk); |
| 1779 | |
| 1780 | hcd->uses_new_polling = 1; |
Felipe Balbi | ec95d35 | 2011-02-24 10:36:53 +0200 | [diff] [blame] | 1781 | hcd->has_tt = 1; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1782 | |
| 1783 | musb->vbuserr_retry = VBUSERR_RETRY_COUNT; |
David Brownell | f7f9d63 | 2009-03-31 12:32:12 -0700 | [diff] [blame] | 1784 | musb->a_wait_bcon = OTG_TIME_A_WAIT_BCON; |
Ming Lei | 456bb16 | 2010-12-21 21:16:11 +0800 | [diff] [blame] | 1785 | dev_set_drvdata(dev, musb); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1786 | musb->mregs = mbase; |
| 1787 | musb->ctrl_base = mbase; |
| 1788 | musb->nIrq = -ENODEV; |
Felipe Balbi | ca6d1b1 | 2008-08-08 12:40:54 +0300 | [diff] [blame] | 1789 | musb->config = config; |
Kevin Hilman | 02582b9 | 2008-09-15 12:09:31 +0200 | [diff] [blame] | 1790 | BUG_ON(musb->config->num_eps > MUSB_C_NUM_EPS); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1791 | for (epnum = 0, ep = musb->endpoints; |
Felipe Balbi | ca6d1b1 | 2008-08-08 12:40:54 +0300 | [diff] [blame] | 1792 | epnum < musb->config->num_eps; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1793 | epnum++, ep++) { |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1794 | ep->musb = musb; |
| 1795 | ep->epnum = epnum; |
| 1796 | } |
| 1797 | |
| 1798 | musb->controller = dev; |
Felipe Balbi | 743411b | 2010-12-01 13:22:05 +0200 | [diff] [blame] | 1799 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1800 | return musb; |
| 1801 | } |
| 1802 | |
| 1803 | static void musb_free(struct musb *musb) |
| 1804 | { |
| 1805 | /* this has multiple entry modes. it handles fault cleanup after |
| 1806 | * probe(), where things may be partially set up, as well as rmmod |
| 1807 | * cleanup after everything's been de-activated. |
| 1808 | */ |
| 1809 | |
| 1810 | #ifdef CONFIG_SYSFS |
Felipe Balbi | 9437575 | 2009-12-15 11:08:38 +0200 | [diff] [blame] | 1811 | sysfs_remove_group(&musb->controller->kobj, &musb_attr_group); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1812 | #endif |
| 1813 | |
Ajay Kumar Gupta | 97a3989 | 2009-01-24 17:56:39 -0800 | [diff] [blame] | 1814 | if (musb->nIrq >= 0) { |
| 1815 | if (musb->irq_wake) |
| 1816 | disable_irq_wake(musb->nIrq); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1817 | free_irq(musb->nIrq, musb); |
| 1818 | } |
| 1819 | if (is_dma_capable() && musb->dma_controller) { |
| 1820 | struct dma_controller *c = musb->dma_controller; |
| 1821 | |
| 1822 | (void) c->stop(c); |
| 1823 | dma_controller_destroy(c); |
| 1824 | } |
| 1825 | |
Brian Downing | decadac | 2012-08-04 18:32:19 -0500 | [diff] [blame] | 1826 | usb_put_hcd(musb_to_hcd(musb)); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1827 | } |
| 1828 | |
| 1829 | /* |
| 1830 | * Perform generic per-controller initialization. |
| 1831 | * |
Sergei Shtylyov | 28dd924 | 2012-08-21 21:22:45 +0400 | [diff] [blame] | 1832 | * @dev: the controller (already clocked, etc) |
| 1833 | * @nIrq: IRQ number |
| 1834 | * @ctrl: virtual address of controller registers, |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1835 | * not yet corrected for platform-specific offsets |
| 1836 | */ |
Bill Pemberton | 41ac7b3 | 2012-11-19 13:21:48 -0500 | [diff] [blame] | 1837 | static int |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1838 | musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) |
| 1839 | { |
| 1840 | int status; |
| 1841 | struct musb *musb; |
| 1842 | struct musb_hdrc_platform_data *plat = dev->platform_data; |
Felipe Balbi | 032ec49 | 2011-11-24 15:46:26 +0200 | [diff] [blame] | 1843 | struct usb_hcd *hcd; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1844 | |
| 1845 | /* The driver might handle more features than the board; OK. |
| 1846 | * Fail when the board needs a feature that's not enabled. |
| 1847 | */ |
| 1848 | if (!plat) { |
| 1849 | dev_dbg(dev, "no platform_data?\n"); |
Sergei Shtylyov | 34e2beb | 2010-03-25 13:14:33 +0200 | [diff] [blame] | 1850 | status = -ENODEV; |
| 1851 | goto fail0; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1852 | } |
Sergei Shtylyov | 34e2beb | 2010-03-25 13:14:33 +0200 | [diff] [blame] | 1853 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1854 | /* allocate */ |
Felipe Balbi | ca6d1b1 | 2008-08-08 12:40:54 +0300 | [diff] [blame] | 1855 | musb = allocate_instance(dev, plat->config, ctrl); |
Sergei Shtylyov | 34e2beb | 2010-03-25 13:14:33 +0200 | [diff] [blame] | 1856 | if (!musb) { |
| 1857 | status = -ENOMEM; |
| 1858 | goto fail0; |
| 1859 | } |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1860 | |
Hema HK | 7acc619 | 2011-02-28 14:19:34 +0530 | [diff] [blame] | 1861 | pm_runtime_use_autosuspend(musb->controller); |
| 1862 | pm_runtime_set_autosuspend_delay(musb->controller, 200); |
| 1863 | pm_runtime_enable(musb->controller); |
| 1864 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1865 | spin_lock_init(&musb->lock); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1866 | musb->board_set_power = plat->set_power; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1867 | musb->min_power = plat->min_power; |
Felipe Balbi | f7ec943 | 2010-12-02 09:48:58 +0200 | [diff] [blame] | 1868 | musb->ops = plat->platform_ops; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1869 | |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 1870 | /* The musb_platform_init() call: |
Philippe De Swert | baef653 | 2012-11-06 15:32:13 +0200 | [diff] [blame] | 1871 | * - adjusts musb->mregs |
| 1872 | * - sets the musb->isr |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 1873 | * - may initialize an integrated tranceiver |
Kishon Vijay Abraham I | 721002e | 2012-06-22 17:02:45 +0530 | [diff] [blame] | 1874 | * - initializes musb->xceiv, usually by otg_get_phy() |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 1875 | * - stops powering VBUS |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 1876 | * |
Joe Perches | 7c9d440 | 2011-06-23 11:39:20 -0700 | [diff] [blame] | 1877 | * There are various transceiver configurations. Blackfin, |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 1878 | * DaVinci, TUSB60x0, and others integrate them. OMAP3 uses |
| 1879 | * external/discrete ones in various flavors (twl4030 family, |
| 1880 | * isp1504, non-OTG, etc) mostly hooking up through ULPI. |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1881 | */ |
Hema Kalliguddi | ea65df5 | 2010-09-22 19:27:40 -0500 | [diff] [blame] | 1882 | status = musb_platform_init(musb); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1883 | if (status < 0) |
Felipe Balbi | 0349176 | 2010-12-02 09:57:08 +0200 | [diff] [blame] | 1884 | goto fail1; |
Sergei Shtylyov | 34e2beb | 2010-03-25 13:14:33 +0200 | [diff] [blame] | 1885 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1886 | if (!musb->isr) { |
| 1887 | status = -ENODEV; |
Grazvydas Ignotas | c04352a | 2012-02-04 19:43:51 +0200 | [diff] [blame] | 1888 | goto fail2; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1889 | } |
| 1890 | |
Heikki Krogerus | ffb865b | 2010-03-25 13:25:28 +0200 | [diff] [blame] | 1891 | if (!musb->xceiv->io_ops) { |
Grazvydas Ignotas | bf070bc | 2012-03-21 16:35:52 +0200 | [diff] [blame] | 1892 | musb->xceiv->io_dev = musb->controller; |
Heikki Krogerus | ffb865b | 2010-03-25 13:25:28 +0200 | [diff] [blame] | 1893 | musb->xceiv->io_priv = musb->mregs; |
| 1894 | musb->xceiv->io_ops = &musb_ulpi_access; |
| 1895 | } |
| 1896 | |
Grazvydas Ignotas | c04352a | 2012-02-04 19:43:51 +0200 | [diff] [blame] | 1897 | pm_runtime_get_sync(musb->controller); |
| 1898 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1899 | #ifndef CONFIG_MUSB_PIO_ONLY |
| 1900 | if (use_dma && dev->dma_mask) { |
| 1901 | struct dma_controller *c; |
| 1902 | |
| 1903 | c = dma_controller_create(musb, musb->mregs); |
| 1904 | musb->dma_controller = c; |
| 1905 | if (c) |
| 1906 | (void) c->start(c); |
| 1907 | } |
| 1908 | #endif |
| 1909 | /* ideally this would be abstracted in platform setup */ |
| 1910 | if (!is_dma_capable() || !musb->dma_controller) |
| 1911 | dev->dma_mask = NULL; |
| 1912 | |
| 1913 | /* be sure interrupts are disabled before connecting ISR */ |
| 1914 | musb_platform_disable(musb); |
| 1915 | musb_generic_disable(musb); |
| 1916 | |
| 1917 | /* setup musb parts of the core (especially endpoints) */ |
Felipe Balbi | ca6d1b1 | 2008-08-08 12:40:54 +0300 | [diff] [blame] | 1918 | status = musb_core_init(plat->config->multipoint |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1919 | ? MUSB_CONTROLLER_MHDRC |
| 1920 | : MUSB_CONTROLLER_HDRC, musb); |
| 1921 | if (status < 0) |
Sergei Shtylyov | 34e2beb | 2010-03-25 13:14:33 +0200 | [diff] [blame] | 1922 | goto fail3; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1923 | |
David Brownell | f7f9d63 | 2009-03-31 12:32:12 -0700 | [diff] [blame] | 1924 | setup_timer(&musb->otg_timer, musb_otg_timer_func, (unsigned long) musb); |
David Brownell | f7f9d63 | 2009-03-31 12:32:12 -0700 | [diff] [blame] | 1925 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1926 | /* Init IRQ workqueue before request_irq */ |
| 1927 | INIT_WORK(&musb->irq_work, musb_irq_work); |
| 1928 | |
| 1929 | /* attach to the IRQ */ |
Kay Sievers | 427c4f3 | 2008-11-07 01:52:53 +0100 | [diff] [blame] | 1930 | if (request_irq(nIrq, musb->isr, 0, dev_name(dev), musb)) { |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1931 | dev_err(dev, "request_irq %d failed!\n", nIrq); |
| 1932 | status = -ENODEV; |
Sergei Shtylyov | 34e2beb | 2010-03-25 13:14:33 +0200 | [diff] [blame] | 1933 | goto fail3; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1934 | } |
| 1935 | musb->nIrq = nIrq; |
Felipe Balbi | 032ec49 | 2011-11-24 15:46:26 +0200 | [diff] [blame] | 1936 | /* FIXME this handles wakeup irqs wrong */ |
Felipe Balbi | c48a515 | 2008-11-24 13:06:53 +0200 | [diff] [blame] | 1937 | if (enable_irq_wake(nIrq) == 0) { |
| 1938 | musb->irq_wake = 1; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1939 | device_init_wakeup(dev, 1); |
Felipe Balbi | c48a515 | 2008-11-24 13:06:53 +0200 | [diff] [blame] | 1940 | } else { |
| 1941 | musb->irq_wake = 0; |
| 1942 | } |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1943 | |
David Brownell | 84e250f | 2009-03-31 12:30:04 -0700 | [diff] [blame] | 1944 | /* host side needs more setup */ |
Felipe Balbi | 032ec49 | 2011-11-24 15:46:26 +0200 | [diff] [blame] | 1945 | hcd = musb_to_hcd(musb); |
| 1946 | otg_set_host(musb->xceiv->otg, &hcd->self); |
| 1947 | hcd->self.otg_port = 1; |
| 1948 | musb->xceiv->otg->host = &hcd->self; |
| 1949 | hcd->power_budget = 2 * (plat->power ? : 250); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1950 | |
Felipe Balbi | 032ec49 | 2011-11-24 15:46:26 +0200 | [diff] [blame] | 1951 | /* program PHY to use external vBus if required */ |
| 1952 | if (plat->extvbus) { |
| 1953 | u8 busctl = musb_read_ulpi_buscontrol(musb->mregs); |
| 1954 | busctl |= MUSB_ULPI_USE_EXTVBUS; |
| 1955 | musb_write_ulpi_buscontrol(musb->mregs, busctl); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1956 | } |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1957 | |
Felipe Balbi | 032ec49 | 2011-11-24 15:46:26 +0200 | [diff] [blame] | 1958 | MUSB_DEV_MODE(musb); |
| 1959 | musb->xceiv->otg->default_a = 0; |
| 1960 | musb->xceiv->state = OTG_STATE_B_IDLE; |
Anand Gadiyar | 07a8cdd | 2010-11-18 18:54:17 +0530 | [diff] [blame] | 1961 | |
Felipe Balbi | 032ec49 | 2011-11-24 15:46:26 +0200 | [diff] [blame] | 1962 | status = musb_gadget_setup(musb); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1963 | |
Sergei Shtylyov | 461972d | 2010-03-25 13:14:32 +0200 | [diff] [blame] | 1964 | if (status < 0) |
Sergei Shtylyov | 34e2beb | 2010-03-25 13:14:33 +0200 | [diff] [blame] | 1965 | goto fail3; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1966 | |
Felipe Balbi | 7f7f9e2 | 2010-03-12 10:29:11 +0200 | [diff] [blame] | 1967 | status = musb_init_debugfs(musb); |
| 1968 | if (status < 0) |
Felipe Balbi | b0f9da7 | 2010-03-25 13:25:18 +0200 | [diff] [blame] | 1969 | goto fail4; |
Felipe Balbi | 7f7f9e2 | 2010-03-12 10:29:11 +0200 | [diff] [blame] | 1970 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 1971 | #ifdef CONFIG_SYSFS |
Felipe Balbi | 9437575 | 2009-12-15 11:08:38 +0200 | [diff] [blame] | 1972 | status = sysfs_create_group(&musb->controller->kobj, &musb_attr_group); |
Felipe Balbi | 28c2c51 | 2008-09-11 11:53:25 +0300 | [diff] [blame] | 1973 | if (status) |
Felipe Balbi | b0f9da7 | 2010-03-25 13:25:18 +0200 | [diff] [blame] | 1974 | goto fail5; |
Sergei Shtylyov | 461972d | 2010-03-25 13:14:32 +0200 | [diff] [blame] | 1975 | #endif |
Felipe Balbi | 28c2c51 | 2008-09-11 11:53:25 +0300 | [diff] [blame] | 1976 | |
Grazvydas Ignotas | c04352a | 2012-02-04 19:43:51 +0200 | [diff] [blame] | 1977 | pm_runtime_put(musb->controller); |
| 1978 | |
Felipe Balbi | 28c2c51 | 2008-09-11 11:53:25 +0300 | [diff] [blame] | 1979 | return 0; |
| 1980 | |
Felipe Balbi | b0f9da7 | 2010-03-25 13:25:18 +0200 | [diff] [blame] | 1981 | fail5: |
| 1982 | musb_exit_debugfs(musb); |
| 1983 | |
Sergei Shtylyov | 34e2beb | 2010-03-25 13:14:33 +0200 | [diff] [blame] | 1984 | fail4: |
Felipe Balbi | 032ec49 | 2011-11-24 15:46:26 +0200 | [diff] [blame] | 1985 | musb_gadget_cleanup(musb); |
Sergei Shtylyov | 34e2beb | 2010-03-25 13:14:33 +0200 | [diff] [blame] | 1986 | |
| 1987 | fail3: |
Grazvydas Ignotas | c04352a | 2012-02-04 19:43:51 +0200 | [diff] [blame] | 1988 | pm_runtime_put_sync(musb->controller); |
| 1989 | |
| 1990 | fail2: |
Sergei Shtylyov | 34e2beb | 2010-03-25 13:14:33 +0200 | [diff] [blame] | 1991 | if (musb->irq_wake) |
| 1992 | device_init_wakeup(dev, 0); |
Felipe Balbi | 28c2c51 | 2008-09-11 11:53:25 +0300 | [diff] [blame] | 1993 | musb_platform_exit(musb); |
Sergei Shtylyov | 34e2beb | 2010-03-25 13:14:33 +0200 | [diff] [blame] | 1994 | |
Sergei Shtylyov | 34e2beb | 2010-03-25 13:14:33 +0200 | [diff] [blame] | 1995 | fail1: |
Felipe Balbi | 28c2c51 | 2008-09-11 11:53:25 +0300 | [diff] [blame] | 1996 | dev_err(musb->controller, |
| 1997 | "musb_init_controller failed with status %d\n", status); |
| 1998 | |
Felipe Balbi | 28c2c51 | 2008-09-11 11:53:25 +0300 | [diff] [blame] | 1999 | musb_free(musb); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2000 | |
Sergei Shtylyov | 34e2beb | 2010-03-25 13:14:33 +0200 | [diff] [blame] | 2001 | fail0: |
| 2002 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2003 | return status; |
| 2004 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2005 | } |
| 2006 | |
| 2007 | /*-------------------------------------------------------------------------*/ |
| 2008 | |
| 2009 | /* all implementations (PCI bridge to FPGA, VLYNQ, etc) should just |
| 2010 | * bridge to a platform device; this driver then suffices. |
| 2011 | */ |
Bill Pemberton | 41ac7b3 | 2012-11-19 13:21:48 -0500 | [diff] [blame] | 2012 | static int musb_probe(struct platform_device *pdev) |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2013 | { |
| 2014 | struct device *dev = &pdev->dev; |
Hema Kalliguddi | fcf173e | 2010-09-29 11:26:39 -0500 | [diff] [blame] | 2015 | int irq = platform_get_irq_byname(pdev, "mc"); |
Felipe Balbi | da5108e | 2010-01-21 15:33:57 +0200 | [diff] [blame] | 2016 | int status; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2017 | struct resource *iomem; |
| 2018 | void __iomem *base; |
| 2019 | |
| 2020 | iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
Sergei Shtylyov | 541079d | 2010-12-10 21:03:29 +0300 | [diff] [blame] | 2021 | if (!iomem || irq <= 0) |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2022 | return -ENODEV; |
| 2023 | |
Felipe Balbi | 195e9e4 | 2009-12-15 11:08:42 +0200 | [diff] [blame] | 2024 | base = ioremap(iomem->start, resource_size(iomem)); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2025 | if (!base) { |
| 2026 | dev_err(dev, "ioremap failed\n"); |
| 2027 | return -ENOMEM; |
| 2028 | } |
| 2029 | |
Felipe Balbi | da5108e | 2010-01-21 15:33:57 +0200 | [diff] [blame] | 2030 | status = musb_init_controller(dev, irq, base); |
| 2031 | if (status < 0) |
| 2032 | iounmap(base); |
| 2033 | |
| 2034 | return status; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2035 | } |
| 2036 | |
Bill Pemberton | fb4e98a | 2012-11-19 13:26:20 -0500 | [diff] [blame^] | 2037 | static int musb_remove(struct platform_device *pdev) |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2038 | { |
Ajay Kumar Gupta | 8d2421e | 2012-08-31 11:09:50 +0000 | [diff] [blame] | 2039 | struct device *dev = &pdev->dev; |
| 2040 | struct musb *musb = dev_to_musb(dev); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2041 | void __iomem *ctrl_base = musb->ctrl_base; |
| 2042 | |
| 2043 | /* this gets called on rmmod. |
| 2044 | * - Host mode: host may still be active |
| 2045 | * - Peripheral mode: peripheral is deactivated (or never-activated) |
| 2046 | * - OTG mode: both roles are deactivated (or never-activated) |
| 2047 | */ |
Felipe Balbi | 7f7f9e2 | 2010-03-12 10:29:11 +0200 | [diff] [blame] | 2048 | musb_exit_debugfs(musb); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2049 | musb_shutdown(pdev); |
Sergei Shtylyov | 461972d | 2010-03-25 13:14:32 +0200 | [diff] [blame] | 2050 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2051 | musb_free(musb); |
| 2052 | iounmap(ctrl_base); |
Ajay Kumar Gupta | 8d2421e | 2012-08-31 11:09:50 +0000 | [diff] [blame] | 2053 | device_init_wakeup(dev, 0); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2054 | #ifndef CONFIG_MUSB_PIO_ONLY |
Ajay Kumar Gupta | 8d2421e | 2012-08-31 11:09:50 +0000 | [diff] [blame] | 2055 | dma_set_mask(dev, *dev->parent->dma_mask); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2056 | #endif |
| 2057 | return 0; |
| 2058 | } |
| 2059 | |
| 2060 | #ifdef CONFIG_PM |
| 2061 | |
Felipe Balbi | 3c8a5fc | 2010-12-02 12:28:39 +0200 | [diff] [blame] | 2062 | static void musb_save_context(struct musb *musb) |
Ajay Kumar Gupta | 4f712e0 | 2010-01-21 15:33:52 +0200 | [diff] [blame] | 2063 | { |
| 2064 | int i; |
| 2065 | void __iomem *musb_base = musb->mregs; |
Bob Liu | ae9b2ad | 2010-09-24 13:44:07 +0300 | [diff] [blame] | 2066 | void __iomem *epio; |
Ajay Kumar Gupta | 4f712e0 | 2010-01-21 15:33:52 +0200 | [diff] [blame] | 2067 | |
Felipe Balbi | 032ec49 | 2011-11-24 15:46:26 +0200 | [diff] [blame] | 2068 | musb->context.frame = musb_readw(musb_base, MUSB_FRAME); |
| 2069 | musb->context.testmode = musb_readb(musb_base, MUSB_TESTMODE); |
| 2070 | musb->context.busctl = musb_read_ulpi_buscontrol(musb->mregs); |
Felipe Balbi | 7421107 | 2010-12-01 13:53:27 +0200 | [diff] [blame] | 2071 | musb->context.power = musb_readb(musb_base, MUSB_POWER); |
Felipe Balbi | 7421107 | 2010-12-01 13:53:27 +0200 | [diff] [blame] | 2072 | musb->context.intrusbe = musb_readb(musb_base, MUSB_INTRUSBE); |
| 2073 | musb->context.index = musb_readb(musb_base, MUSB_INDEX); |
| 2074 | musb->context.devctl = musb_readb(musb_base, MUSB_DEVCTL); |
Ajay Kumar Gupta | 4f712e0 | 2010-01-21 15:33:52 +0200 | [diff] [blame] | 2075 | |
Bob Liu | ae9b2ad | 2010-09-24 13:44:07 +0300 | [diff] [blame] | 2076 | for (i = 0; i < musb->config->num_eps; ++i) { |
Felipe Balbi | e4e5b136 | 2011-06-27 15:57:46 +0300 | [diff] [blame] | 2077 | struct musb_hw_ep *hw_ep; |
| 2078 | |
| 2079 | hw_ep = &musb->endpoints[i]; |
| 2080 | if (!hw_ep) |
| 2081 | continue; |
| 2082 | |
| 2083 | epio = hw_ep->regs; |
| 2084 | if (!epio) |
| 2085 | continue; |
| 2086 | |
Vikram Pandita | ea73755 | 2011-09-07 09:19:23 -0700 | [diff] [blame] | 2087 | musb_writeb(musb_base, MUSB_INDEX, i); |
Felipe Balbi | 7421107 | 2010-12-01 13:53:27 +0200 | [diff] [blame] | 2088 | musb->context.index_regs[i].txmaxp = |
Bob Liu | ae9b2ad | 2010-09-24 13:44:07 +0300 | [diff] [blame] | 2089 | musb_readw(epio, MUSB_TXMAXP); |
Felipe Balbi | 7421107 | 2010-12-01 13:53:27 +0200 | [diff] [blame] | 2090 | musb->context.index_regs[i].txcsr = |
Bob Liu | ae9b2ad | 2010-09-24 13:44:07 +0300 | [diff] [blame] | 2091 | musb_readw(epio, MUSB_TXCSR); |
Felipe Balbi | 7421107 | 2010-12-01 13:53:27 +0200 | [diff] [blame] | 2092 | musb->context.index_regs[i].rxmaxp = |
Bob Liu | ae9b2ad | 2010-09-24 13:44:07 +0300 | [diff] [blame] | 2093 | musb_readw(epio, MUSB_RXMAXP); |
Felipe Balbi | 7421107 | 2010-12-01 13:53:27 +0200 | [diff] [blame] | 2094 | musb->context.index_regs[i].rxcsr = |
Bob Liu | ae9b2ad | 2010-09-24 13:44:07 +0300 | [diff] [blame] | 2095 | musb_readw(epio, MUSB_RXCSR); |
Ajay Kumar Gupta | 4f712e0 | 2010-01-21 15:33:52 +0200 | [diff] [blame] | 2096 | |
| 2097 | if (musb->dyn_fifo) { |
Felipe Balbi | 7421107 | 2010-12-01 13:53:27 +0200 | [diff] [blame] | 2098 | musb->context.index_regs[i].txfifoadd = |
Ajay Kumar Gupta | 4f712e0 | 2010-01-21 15:33:52 +0200 | [diff] [blame] | 2099 | musb_read_txfifoadd(musb_base); |
Felipe Balbi | 7421107 | 2010-12-01 13:53:27 +0200 | [diff] [blame] | 2100 | musb->context.index_regs[i].rxfifoadd = |
Ajay Kumar Gupta | 4f712e0 | 2010-01-21 15:33:52 +0200 | [diff] [blame] | 2101 | musb_read_rxfifoadd(musb_base); |
Felipe Balbi | 7421107 | 2010-12-01 13:53:27 +0200 | [diff] [blame] | 2102 | musb->context.index_regs[i].txfifosz = |
Ajay Kumar Gupta | 4f712e0 | 2010-01-21 15:33:52 +0200 | [diff] [blame] | 2103 | musb_read_txfifosz(musb_base); |
Felipe Balbi | 7421107 | 2010-12-01 13:53:27 +0200 | [diff] [blame] | 2104 | musb->context.index_regs[i].rxfifosz = |
Ajay Kumar Gupta | 4f712e0 | 2010-01-21 15:33:52 +0200 | [diff] [blame] | 2105 | musb_read_rxfifosz(musb_base); |
| 2106 | } |
Ajay Kumar Gupta | 4f712e0 | 2010-01-21 15:33:52 +0200 | [diff] [blame] | 2107 | |
Felipe Balbi | 032ec49 | 2011-11-24 15:46:26 +0200 | [diff] [blame] | 2108 | musb->context.index_regs[i].txtype = |
| 2109 | musb_readb(epio, MUSB_TXTYPE); |
| 2110 | musb->context.index_regs[i].txinterval = |
| 2111 | musb_readb(epio, MUSB_TXINTERVAL); |
| 2112 | musb->context.index_regs[i].rxtype = |
| 2113 | musb_readb(epio, MUSB_RXTYPE); |
| 2114 | musb->context.index_regs[i].rxinterval = |
| 2115 | musb_readb(epio, MUSB_RXINTERVAL); |
Ajay Kumar Gupta | 4f712e0 | 2010-01-21 15:33:52 +0200 | [diff] [blame] | 2116 | |
Felipe Balbi | 032ec49 | 2011-11-24 15:46:26 +0200 | [diff] [blame] | 2117 | musb->context.index_regs[i].txfunaddr = |
| 2118 | musb_read_txfunaddr(musb_base, i); |
| 2119 | musb->context.index_regs[i].txhubaddr = |
| 2120 | musb_read_txhubaddr(musb_base, i); |
| 2121 | musb->context.index_regs[i].txhubport = |
| 2122 | musb_read_txhubport(musb_base, i); |
| 2123 | |
| 2124 | musb->context.index_regs[i].rxfunaddr = |
| 2125 | musb_read_rxfunaddr(musb_base, i); |
| 2126 | musb->context.index_regs[i].rxhubaddr = |
| 2127 | musb_read_rxhubaddr(musb_base, i); |
| 2128 | musb->context.index_regs[i].rxhubport = |
| 2129 | musb_read_rxhubport(musb_base, i); |
Ajay Kumar Gupta | 4f712e0 | 2010-01-21 15:33:52 +0200 | [diff] [blame] | 2130 | } |
Ajay Kumar Gupta | 4f712e0 | 2010-01-21 15:33:52 +0200 | [diff] [blame] | 2131 | } |
| 2132 | |
Felipe Balbi | 3c8a5fc | 2010-12-02 12:28:39 +0200 | [diff] [blame] | 2133 | static void musb_restore_context(struct musb *musb) |
Ajay Kumar Gupta | 4f712e0 | 2010-01-21 15:33:52 +0200 | [diff] [blame] | 2134 | { |
| 2135 | int i; |
| 2136 | void __iomem *musb_base = musb->mregs; |
| 2137 | void __iomem *ep_target_regs; |
Bob Liu | ae9b2ad | 2010-09-24 13:44:07 +0300 | [diff] [blame] | 2138 | void __iomem *epio; |
Ajay Kumar Gupta | 4f712e0 | 2010-01-21 15:33:52 +0200 | [diff] [blame] | 2139 | |
Felipe Balbi | 032ec49 | 2011-11-24 15:46:26 +0200 | [diff] [blame] | 2140 | musb_writew(musb_base, MUSB_FRAME, musb->context.frame); |
| 2141 | musb_writeb(musb_base, MUSB_TESTMODE, musb->context.testmode); |
| 2142 | musb_write_ulpi_buscontrol(musb->mregs, musb->context.busctl); |
Felipe Balbi | 7421107 | 2010-12-01 13:53:27 +0200 | [diff] [blame] | 2143 | musb_writeb(musb_base, MUSB_POWER, musb->context.power); |
Sebastian Andrzej Siewior | b18d26f | 2012-10-30 19:52:26 +0100 | [diff] [blame] | 2144 | musb_writew(musb_base, MUSB_INTRTXE, musb->intrtxe); |
Sebastian Andrzej Siewior | af5ec14 | 2012-10-30 19:52:25 +0100 | [diff] [blame] | 2145 | musb_writew(musb_base, MUSB_INTRRXE, musb->intrrxe); |
Felipe Balbi | 7421107 | 2010-12-01 13:53:27 +0200 | [diff] [blame] | 2146 | musb_writeb(musb_base, MUSB_INTRUSBE, musb->context.intrusbe); |
| 2147 | musb_writeb(musb_base, MUSB_DEVCTL, musb->context.devctl); |
Ajay Kumar Gupta | 4f712e0 | 2010-01-21 15:33:52 +0200 | [diff] [blame] | 2148 | |
Bob Liu | ae9b2ad | 2010-09-24 13:44:07 +0300 | [diff] [blame] | 2149 | for (i = 0; i < musb->config->num_eps; ++i) { |
Felipe Balbi | e4e5b136 | 2011-06-27 15:57:46 +0300 | [diff] [blame] | 2150 | struct musb_hw_ep *hw_ep; |
| 2151 | |
| 2152 | hw_ep = &musb->endpoints[i]; |
| 2153 | if (!hw_ep) |
| 2154 | continue; |
| 2155 | |
| 2156 | epio = hw_ep->regs; |
| 2157 | if (!epio) |
| 2158 | continue; |
| 2159 | |
Vikram Pandita | ea73755 | 2011-09-07 09:19:23 -0700 | [diff] [blame] | 2160 | musb_writeb(musb_base, MUSB_INDEX, i); |
Bob Liu | ae9b2ad | 2010-09-24 13:44:07 +0300 | [diff] [blame] | 2161 | musb_writew(epio, MUSB_TXMAXP, |
Felipe Balbi | 7421107 | 2010-12-01 13:53:27 +0200 | [diff] [blame] | 2162 | musb->context.index_regs[i].txmaxp); |
Bob Liu | ae9b2ad | 2010-09-24 13:44:07 +0300 | [diff] [blame] | 2163 | musb_writew(epio, MUSB_TXCSR, |
Felipe Balbi | 7421107 | 2010-12-01 13:53:27 +0200 | [diff] [blame] | 2164 | musb->context.index_regs[i].txcsr); |
Bob Liu | ae9b2ad | 2010-09-24 13:44:07 +0300 | [diff] [blame] | 2165 | musb_writew(epio, MUSB_RXMAXP, |
Felipe Balbi | 7421107 | 2010-12-01 13:53:27 +0200 | [diff] [blame] | 2166 | musb->context.index_regs[i].rxmaxp); |
Bob Liu | ae9b2ad | 2010-09-24 13:44:07 +0300 | [diff] [blame] | 2167 | musb_writew(epio, MUSB_RXCSR, |
Felipe Balbi | 7421107 | 2010-12-01 13:53:27 +0200 | [diff] [blame] | 2168 | musb->context.index_regs[i].rxcsr); |
Ajay Kumar Gupta | 4f712e0 | 2010-01-21 15:33:52 +0200 | [diff] [blame] | 2169 | |
| 2170 | if (musb->dyn_fifo) { |
| 2171 | musb_write_txfifosz(musb_base, |
Felipe Balbi | 7421107 | 2010-12-01 13:53:27 +0200 | [diff] [blame] | 2172 | musb->context.index_regs[i].txfifosz); |
Ajay Kumar Gupta | 4f712e0 | 2010-01-21 15:33:52 +0200 | [diff] [blame] | 2173 | musb_write_rxfifosz(musb_base, |
Felipe Balbi | 7421107 | 2010-12-01 13:53:27 +0200 | [diff] [blame] | 2174 | musb->context.index_regs[i].rxfifosz); |
Ajay Kumar Gupta | 4f712e0 | 2010-01-21 15:33:52 +0200 | [diff] [blame] | 2175 | musb_write_txfifoadd(musb_base, |
Felipe Balbi | 7421107 | 2010-12-01 13:53:27 +0200 | [diff] [blame] | 2176 | musb->context.index_regs[i].txfifoadd); |
Ajay Kumar Gupta | 4f712e0 | 2010-01-21 15:33:52 +0200 | [diff] [blame] | 2177 | musb_write_rxfifoadd(musb_base, |
Felipe Balbi | 7421107 | 2010-12-01 13:53:27 +0200 | [diff] [blame] | 2178 | musb->context.index_regs[i].rxfifoadd); |
Ajay Kumar Gupta | 4f712e0 | 2010-01-21 15:33:52 +0200 | [diff] [blame] | 2179 | } |
| 2180 | |
Felipe Balbi | 032ec49 | 2011-11-24 15:46:26 +0200 | [diff] [blame] | 2181 | musb_writeb(epio, MUSB_TXTYPE, |
Felipe Balbi | 7421107 | 2010-12-01 13:53:27 +0200 | [diff] [blame] | 2182 | musb->context.index_regs[i].txtype); |
Felipe Balbi | 032ec49 | 2011-11-24 15:46:26 +0200 | [diff] [blame] | 2183 | musb_writeb(epio, MUSB_TXINTERVAL, |
Felipe Balbi | 7421107 | 2010-12-01 13:53:27 +0200 | [diff] [blame] | 2184 | musb->context.index_regs[i].txinterval); |
Felipe Balbi | 032ec49 | 2011-11-24 15:46:26 +0200 | [diff] [blame] | 2185 | musb_writeb(epio, MUSB_RXTYPE, |
Felipe Balbi | 7421107 | 2010-12-01 13:53:27 +0200 | [diff] [blame] | 2186 | musb->context.index_regs[i].rxtype); |
Felipe Balbi | 032ec49 | 2011-11-24 15:46:26 +0200 | [diff] [blame] | 2187 | musb_writeb(epio, MUSB_RXINTERVAL, |
Ajay Kumar Gupta | 4f712e0 | 2010-01-21 15:33:52 +0200 | [diff] [blame] | 2188 | |
Felipe Balbi | 032ec49 | 2011-11-24 15:46:26 +0200 | [diff] [blame] | 2189 | musb->context.index_regs[i].rxinterval); |
| 2190 | musb_write_txfunaddr(musb_base, i, |
Felipe Balbi | 7421107 | 2010-12-01 13:53:27 +0200 | [diff] [blame] | 2191 | musb->context.index_regs[i].txfunaddr); |
Felipe Balbi | 032ec49 | 2011-11-24 15:46:26 +0200 | [diff] [blame] | 2192 | musb_write_txhubaddr(musb_base, i, |
Felipe Balbi | 7421107 | 2010-12-01 13:53:27 +0200 | [diff] [blame] | 2193 | musb->context.index_regs[i].txhubaddr); |
Felipe Balbi | 032ec49 | 2011-11-24 15:46:26 +0200 | [diff] [blame] | 2194 | musb_write_txhubport(musb_base, i, |
Felipe Balbi | 7421107 | 2010-12-01 13:53:27 +0200 | [diff] [blame] | 2195 | musb->context.index_regs[i].txhubport); |
Ajay Kumar Gupta | 4f712e0 | 2010-01-21 15:33:52 +0200 | [diff] [blame] | 2196 | |
Felipe Balbi | 032ec49 | 2011-11-24 15:46:26 +0200 | [diff] [blame] | 2197 | ep_target_regs = |
| 2198 | musb_read_target_reg_base(i, musb_base); |
Ajay Kumar Gupta | 4f712e0 | 2010-01-21 15:33:52 +0200 | [diff] [blame] | 2199 | |
Felipe Balbi | 032ec49 | 2011-11-24 15:46:26 +0200 | [diff] [blame] | 2200 | musb_write_rxfunaddr(ep_target_regs, |
Felipe Balbi | 7421107 | 2010-12-01 13:53:27 +0200 | [diff] [blame] | 2201 | musb->context.index_regs[i].rxfunaddr); |
Felipe Balbi | 032ec49 | 2011-11-24 15:46:26 +0200 | [diff] [blame] | 2202 | musb_write_rxhubaddr(ep_target_regs, |
Felipe Balbi | 7421107 | 2010-12-01 13:53:27 +0200 | [diff] [blame] | 2203 | musb->context.index_regs[i].rxhubaddr); |
Felipe Balbi | 032ec49 | 2011-11-24 15:46:26 +0200 | [diff] [blame] | 2204 | musb_write_rxhubport(ep_target_regs, |
Felipe Balbi | 7421107 | 2010-12-01 13:53:27 +0200 | [diff] [blame] | 2205 | musb->context.index_regs[i].rxhubport); |
Ajay Kumar Gupta | 4f712e0 | 2010-01-21 15:33:52 +0200 | [diff] [blame] | 2206 | } |
Ajay Kumar Gupta | 3c5fec7 | 2011-07-08 15:06:13 +0530 | [diff] [blame] | 2207 | musb_writeb(musb_base, MUSB_INDEX, musb->context.index); |
Ajay Kumar Gupta | 4f712e0 | 2010-01-21 15:33:52 +0200 | [diff] [blame] | 2208 | } |
| 2209 | |
Magnus Damm | 48fea96 | 2009-07-08 13:22:56 +0200 | [diff] [blame] | 2210 | static int musb_suspend(struct device *dev) |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2211 | { |
Felipe Balbi | 8220796 | 2011-06-27 15:57:12 +0300 | [diff] [blame] | 2212 | struct musb *musb = dev_to_musb(dev); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2213 | unsigned long flags; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2214 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2215 | spin_lock_irqsave(&musb->lock, flags); |
| 2216 | |
| 2217 | if (is_peripheral_active(musb)) { |
| 2218 | /* FIXME force disconnect unless we know USB will wake |
| 2219 | * the system up quickly enough to respond ... |
| 2220 | */ |
| 2221 | } else if (is_host_active(musb)) { |
| 2222 | /* we know all the children are suspended; sometimes |
| 2223 | * they will even be wakeup-enabled. |
| 2224 | */ |
| 2225 | } |
| 2226 | |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2227 | spin_unlock_irqrestore(&musb->lock, flags); |
| 2228 | return 0; |
| 2229 | } |
| 2230 | |
Magnus Damm | 48fea96 | 2009-07-08 13:22:56 +0200 | [diff] [blame] | 2231 | static int musb_resume_noirq(struct device *dev) |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2232 | { |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2233 | /* for static cmos like DaVinci, register values were preserved |
Kim Kyuwon | 0ec8fd7 | 2009-03-26 18:56:51 -0700 | [diff] [blame] | 2234 | * unless for some reason the whole soc powered down or the USB |
| 2235 | * module got reset through the PSC (vs just being disabled). |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2236 | */ |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2237 | return 0; |
| 2238 | } |
| 2239 | |
Hema HK | 7acc619 | 2011-02-28 14:19:34 +0530 | [diff] [blame] | 2240 | static int musb_runtime_suspend(struct device *dev) |
| 2241 | { |
| 2242 | struct musb *musb = dev_to_musb(dev); |
| 2243 | |
| 2244 | musb_save_context(musb); |
| 2245 | |
| 2246 | return 0; |
| 2247 | } |
| 2248 | |
| 2249 | static int musb_runtime_resume(struct device *dev) |
| 2250 | { |
| 2251 | struct musb *musb = dev_to_musb(dev); |
| 2252 | static int first = 1; |
| 2253 | |
| 2254 | /* |
| 2255 | * When pm_runtime_get_sync called for the first time in driver |
| 2256 | * init, some of the structure is still not initialized which is |
| 2257 | * used in restore function. But clock needs to be |
| 2258 | * enabled before any register access, so |
| 2259 | * pm_runtime_get_sync has to be called. |
| 2260 | * Also context restore without save does not make |
| 2261 | * any sense |
| 2262 | */ |
| 2263 | if (!first) |
| 2264 | musb_restore_context(musb); |
| 2265 | first = 0; |
| 2266 | |
| 2267 | return 0; |
| 2268 | } |
| 2269 | |
Alexey Dobriyan | 4714521 | 2009-12-14 18:00:08 -0800 | [diff] [blame] | 2270 | static const struct dev_pm_ops musb_dev_pm_ops = { |
Magnus Damm | 48fea96 | 2009-07-08 13:22:56 +0200 | [diff] [blame] | 2271 | .suspend = musb_suspend, |
| 2272 | .resume_noirq = musb_resume_noirq, |
Hema HK | 7acc619 | 2011-02-28 14:19:34 +0530 | [diff] [blame] | 2273 | .runtime_suspend = musb_runtime_suspend, |
| 2274 | .runtime_resume = musb_runtime_resume, |
Magnus Damm | 48fea96 | 2009-07-08 13:22:56 +0200 | [diff] [blame] | 2275 | }; |
| 2276 | |
| 2277 | #define MUSB_DEV_PM_OPS (&musb_dev_pm_ops) |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2278 | #else |
Magnus Damm | 48fea96 | 2009-07-08 13:22:56 +0200 | [diff] [blame] | 2279 | #define MUSB_DEV_PM_OPS NULL |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2280 | #endif |
| 2281 | |
| 2282 | static struct platform_driver musb_driver = { |
| 2283 | .driver = { |
| 2284 | .name = (char *)musb_driver_name, |
| 2285 | .bus = &platform_bus_type, |
| 2286 | .owner = THIS_MODULE, |
Magnus Damm | 48fea96 | 2009-07-08 13:22:56 +0200 | [diff] [blame] | 2287 | .pm = MUSB_DEV_PM_OPS, |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2288 | }, |
Felipe Balbi | e9e8c85 | 2012-01-26 12:40:23 +0200 | [diff] [blame] | 2289 | .probe = musb_probe, |
Bill Pemberton | 7690417 | 2012-11-19 13:21:08 -0500 | [diff] [blame] | 2290 | .remove = musb_remove, |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2291 | .shutdown = musb_shutdown, |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2292 | }; |
| 2293 | |
| 2294 | /*-------------------------------------------------------------------------*/ |
| 2295 | |
| 2296 | static int __init musb_init(void) |
| 2297 | { |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2298 | if (usb_disabled()) |
| 2299 | return 0; |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2300 | |
| 2301 | pr_info("%s: version " MUSB_VERSION ", " |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2302 | "?dma?" |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2303 | ", " |
Felipe Balbi | 6228596 | 2011-06-22 17:28:09 +0300 | [diff] [blame] | 2304 | "otg (peripheral+host)", |
Felipe Balbi | 5c8a86e | 2011-05-11 12:44:08 +0300 | [diff] [blame] | 2305 | musb_driver_name); |
Felipe Balbi | e9e8c85 | 2012-01-26 12:40:23 +0200 | [diff] [blame] | 2306 | return platform_driver_register(&musb_driver); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2307 | } |
Felipe Balbi | e9e8c85 | 2012-01-26 12:40:23 +0200 | [diff] [blame] | 2308 | module_init(musb_init); |
Felipe Balbi | 550a737 | 2008-07-24 12:27:36 +0300 | [diff] [blame] | 2309 | |
| 2310 | static void __exit musb_cleanup(void) |
| 2311 | { |
| 2312 | platform_driver_unregister(&musb_driver); |
| 2313 | } |
| 2314 | module_exit(musb_cleanup); |