blob: 204ed37fa9d5a81fc23f28c7c82c1cf16ee02502 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/* Copyright, 1988-1992, Russell Nelson, Crynwr Software
2
3 This program is free software; you can redistribute it and/or modify
4 it under the terms of the GNU General Public License as published by
5 the Free Software Foundation, version 1.
6
7 This program is distributed in the hope that it will be useful,
8 but WITHOUT ANY WARRANTY; without even the implied warranty of
9 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
10 GNU General Public License for more details.
11
12 You should have received a copy of the GNU General Public License
13 along with this program; if not, write to the Free Software
14 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
15 */
16
Linus Torvalds1da177e2005-04-16 15:20:36 -070017
Linus Torvalds1da177e2005-04-16 15:20:36 -070018#define PP_ChipID 0x0000 /* offset 0h -> Corp -ID */
19 /* offset 2h -> Model/Product Number */
20 /* offset 3h -> Chip Revision Number */
21
22#define PP_ISAIOB 0x0020 /* IO base address */
23#define PP_CS8900_ISAINT 0x0022 /* ISA interrupt select */
24#define PP_CS8920_ISAINT 0x0370 /* ISA interrupt select */
25#define PP_CS8900_ISADMA 0x0024 /* ISA Rec DMA channel */
26#define PP_CS8920_ISADMA 0x0374 /* ISA Rec DMA channel */
27#define PP_ISASOF 0x0026 /* ISA DMA offset */
28#define PP_DmaFrameCnt 0x0028 /* ISA DMA Frame count */
29#define PP_DmaByteCnt 0x002A /* ISA DMA Byte count */
30#define PP_CS8900_ISAMemB 0x002C /* Memory base */
31#define PP_CS8920_ISAMemB 0x0348 /* */
32
33#define PP_ISABootBase 0x0030 /* Boot Prom base */
34#define PP_ISABootMask 0x0034 /* Boot Prom Mask */
35
36/* EEPROM data and command registers */
37#define PP_EECMD 0x0040 /* NVR Interface Command register */
38#define PP_EEData 0x0042 /* NVR Interface Data Register */
39#define PP_DebugReg 0x0044 /* Debug Register */
40
41#define PP_RxCFG 0x0102 /* Rx Bus config */
42#define PP_RxCTL 0x0104 /* Receive Control Register */
43#define PP_TxCFG 0x0106 /* Transmit Config Register */
44#define PP_TxCMD 0x0108 /* Transmit Command Register */
45#define PP_BufCFG 0x010A /* Bus configuration Register */
46#define PP_LineCTL 0x0112 /* Line Config Register */
47#define PP_SelfCTL 0x0114 /* Self Command Register */
48#define PP_BusCTL 0x0116 /* ISA bus control Register */
49#define PP_TestCTL 0x0118 /* Test Register */
50#define PP_AutoNegCTL 0x011C /* Auto Negotiation Ctrl */
51
52#define PP_ISQ 0x0120 /* Interrupt Status */
53#define PP_RxEvent 0x0124 /* Rx Event Register */
54#define PP_TxEvent 0x0128 /* Tx Event Register */
55#define PP_BufEvent 0x012C /* Bus Event Register */
56#define PP_RxMiss 0x0130 /* Receive Miss Count */
57#define PP_TxCol 0x0132 /* Transmit Collision Count */
58#define PP_LineST 0x0134 /* Line State Register */
59#define PP_SelfST 0x0136 /* Self State register */
60#define PP_BusST 0x0138 /* Bus Status */
61#define PP_TDR 0x013C /* Time Domain Reflectometry */
62#define PP_AutoNegST 0x013E /* Auto Neg Status */
63#define PP_TxCommand 0x0144 /* Tx Command */
64#define PP_TxLength 0x0146 /* Tx Length */
65#define PP_LAF 0x0150 /* Hash Table */
66#define PP_IA 0x0158 /* Physical Address Register */
67
68#define PP_RxStatus 0x0400 /* Receive start of frame */
69#define PP_RxLength 0x0402 /* Receive Length of frame */
70#define PP_RxFrame 0x0404 /* Receive frame pointer */
71#define PP_TxFrame 0x0A00 /* Transmit frame pointer */
72
73/* Primary I/O Base Address. If no I/O base is supplied by the user, then this */
74/* can be used as the default I/O base to access the PacketPage Area. */
75#define DEFAULTIOBASE 0x0300
76#define FIRST_IO 0x020C /* First I/O port to check */
77#define LAST_IO 0x037C /* Last I/O port to check (+10h) */
78#define ADD_MASK 0x3000 /* Mask it use of the ADD_PORT register */
79#define ADD_SIG 0x3000 /* Expected ID signature */
80
81/* On Macs, we only need use the ISA I/O stuff until we do MEMORY_ON */
82#ifdef CONFIG_MAC
83#define LCSLOTBASE 0xfee00000
84#define MMIOBASE 0x40000
85#endif
86
87#define CHIP_EISA_ID_SIG 0x630E /* Product ID Code for Crystal Chip (CS8900 spec 4.3) */
Denis Vlasenko01bdc032005-07-31 22:34:50 -070088#define CHIP_EISA_ID_SIG_STR "0x630E"
Linus Torvalds1da177e2005-04-16 15:20:36 -070089
90#ifdef IBMEIPKT
91#define EISA_ID_SIG 0x4D24 /* IBM */
92#define PART_NO_SIG 0x1010 /* IBM */
93#define MONGOOSE_BIT 0x0000 /* IBM */
94#else
95#define EISA_ID_SIG 0x630E /* PnP Vendor ID (same as chip id for Crystal board) */
96#define PART_NO_SIG 0x4000 /* ID code CS8920 board (PnP Vendor Product code) */
97#define MONGOOSE_BIT 0x2000 /* PART_NO_SIG + MONGOOSE_BUT => ID of mongoose */
98#endif
99
100#define PRODUCT_ID_ADD 0x0002 /* Address of product ID */
101
102/* Mask to find out the types of registers */
103#define REG_TYPE_MASK 0x001F
104
105/* Eeprom Commands */
106#define ERSE_WR_ENBL 0x00F0
107#define ERSE_WR_DISABLE 0x0000
108
109/* Defines Control/Config register quintuplet numbers */
110#define RX_BUF_CFG 0x0003
111#define RX_CONTROL 0x0005
112#define TX_CFG 0x0007
113#define TX_COMMAND 0x0009
114#define BUF_CFG 0x000B
115#define LINE_CONTROL 0x0013
116#define SELF_CONTROL 0x0015
117#define BUS_CONTROL 0x0017
118#define TEST_CONTROL 0x0019
119
120/* Defines Status/Count registers quintuplet numbers */
121#define RX_EVENT 0x0004
122#define TX_EVENT 0x0008
123#define BUF_EVENT 0x000C
124#define RX_MISS_COUNT 0x0010
125#define TX_COL_COUNT 0x0012
126#define LINE_STATUS 0x0014
127#define SELF_STATUS 0x0016
128#define BUS_STATUS 0x0018
129#define TDR 0x001C
130
131/* PP_RxCFG - Receive Configuration and Interrupt Mask bit definition - Read/write */
132#define SKIP_1 0x0040
133#define RX_STREAM_ENBL 0x0080
134#define RX_OK_ENBL 0x0100
135#define RX_DMA_ONLY 0x0200
136#define AUTO_RX_DMA 0x0400
137#define BUFFER_CRC 0x0800
138#define RX_CRC_ERROR_ENBL 0x1000
139#define RX_RUNT_ENBL 0x2000
140#define RX_EXTRA_DATA_ENBL 0x4000
141
142/* PP_RxCTL - Receive Control bit definition - Read/write */
143#define RX_IA_HASH_ACCEPT 0x0040
144#define RX_PROM_ACCEPT 0x0080
145#define RX_OK_ACCEPT 0x0100
146#define RX_MULTCAST_ACCEPT 0x0200
147#define RX_IA_ACCEPT 0x0400
148#define RX_BROADCAST_ACCEPT 0x0800
149#define RX_BAD_CRC_ACCEPT 0x1000
150#define RX_RUNT_ACCEPT 0x2000
151#define RX_EXTRA_DATA_ACCEPT 0x4000
152#define RX_ALL_ACCEPT (RX_PROM_ACCEPT|RX_BAD_CRC_ACCEPT|RX_RUNT_ACCEPT|RX_EXTRA_DATA_ACCEPT)
153/* Default receive mode - individually addressed, broadcast, and error free */
154#define DEF_RX_ACCEPT (RX_IA_ACCEPT | RX_BROADCAST_ACCEPT | RX_OK_ACCEPT)
155
156/* PP_TxCFG - Transmit Configuration Interrupt Mask bit definition - Read/write */
157#define TX_LOST_CRS_ENBL 0x0040
158#define TX_SQE_ERROR_ENBL 0x0080
159#define TX_OK_ENBL 0x0100
160#define TX_LATE_COL_ENBL 0x0200
161#define TX_JBR_ENBL 0x0400
162#define TX_ANY_COL_ENBL 0x0800
163#define TX_16_COL_ENBL 0x8000
164
165/* PP_TxCMD - Transmit Command bit definition - Read-only */
166#define TX_START_4_BYTES 0x0000
167#define TX_START_64_BYTES 0x0040
168#define TX_START_128_BYTES 0x0080
169#define TX_START_ALL_BYTES 0x00C0
170#define TX_FORCE 0x0100
171#define TX_ONE_COL 0x0200
172#define TX_TWO_PART_DEFF_DISABLE 0x0400
173#define TX_NO_CRC 0x1000
174#define TX_RUNT 0x2000
175
176/* PP_BufCFG - Buffer Configuration Interrupt Mask bit definition - Read/write */
177#define GENERATE_SW_INTERRUPT 0x0040
178#define RX_DMA_ENBL 0x0080
179#define READY_FOR_TX_ENBL 0x0100
180#define TX_UNDERRUN_ENBL 0x0200
181#define RX_MISS_ENBL 0x0400
182#define RX_128_BYTE_ENBL 0x0800
183#define TX_COL_COUNT_OVRFLOW_ENBL 0x1000
184#define RX_MISS_COUNT_OVRFLOW_ENBL 0x2000
185#define RX_DEST_MATCH_ENBL 0x8000
186
187/* PP_LineCTL - Line Control bit definition - Read/write */
188#define SERIAL_RX_ON 0x0040
189#define SERIAL_TX_ON 0x0080
190#define AUI_ONLY 0x0100
191#define AUTO_AUI_10BASET 0x0200
192#define MODIFIED_BACKOFF 0x0800
193#define NO_AUTO_POLARITY 0x1000
194#define TWO_PART_DEFDIS 0x2000
195#define LOW_RX_SQUELCH 0x4000
196
197/* PP_SelfCTL - Software Self Control bit definition - Read/write */
198#define POWER_ON_RESET 0x0040
199#define SW_STOP 0x0100
200#define SLEEP_ON 0x0200
201#define AUTO_WAKEUP 0x0400
202#define HCB0_ENBL 0x1000
203#define HCB1_ENBL 0x2000
204#define HCB0 0x4000
205#define HCB1 0x8000
206
207/* PP_BusCTL - ISA Bus Control bit definition - Read/write */
208#define RESET_RX_DMA 0x0040
209#define MEMORY_ON 0x0400
210#define DMA_BURST_MODE 0x0800
211#define IO_CHANNEL_READY_ON 0x1000
212#define RX_DMA_SIZE_64K 0x2000
213#define ENABLE_IRQ 0x8000
214
215/* PP_TestCTL - Test Control bit definition - Read/write */
216#define LINK_OFF 0x0080
217#define ENDEC_LOOPBACK 0x0200
218#define AUI_LOOPBACK 0x0400
219#define BACKOFF_OFF 0x0800
220#define FDX_8900 0x4000
221#define FAST_TEST 0x8000
222
223/* PP_RxEvent - Receive Event Bit definition - Read-only */
224#define RX_IA_HASHED 0x0040
225#define RX_DRIBBLE 0x0080
226#define RX_OK 0x0100
227#define RX_HASHED 0x0200
228#define RX_IA 0x0400
229#define RX_BROADCAST 0x0800
230#define RX_CRC_ERROR 0x1000
231#define RX_RUNT 0x2000
232#define RX_EXTRA_DATA 0x4000
233
234#define HASH_INDEX_MASK 0x0FC00
235
236/* PP_TxEvent - Transmit Event Bit definition - Read-only */
237#define TX_LOST_CRS 0x0040
238#define TX_SQE_ERROR 0x0080
239#define TX_OK 0x0100
240#define TX_LATE_COL 0x0200
241#define TX_JBR 0x0400
242#define TX_16_COL 0x8000
243#define TX_SEND_OK_BITS (TX_OK|TX_LOST_CRS)
244#define TX_COL_COUNT_MASK 0x7800
245
246/* PP_BufEvent - Buffer Event Bit definition - Read-only */
247#define SW_INTERRUPT 0x0040
248#define RX_DMA 0x0080
249#define READY_FOR_TX 0x0100
250#define TX_UNDERRUN 0x0200
251#define RX_MISS 0x0400
252#define RX_128_BYTE 0x0800
253#define TX_COL_OVRFLW 0x1000
254#define RX_MISS_OVRFLW 0x2000
255#define RX_DEST_MATCH 0x8000
256
257/* PP_LineST - Ethernet Line Status bit definition - Read-only */
258#define LINK_OK 0x0080
259#define AUI_ON 0x0100
260#define TENBASET_ON 0x0200
261#define POLARITY_OK 0x1000
262#define CRS_OK 0x4000
263
264/* PP_SelfST - Chip Software Status bit definition */
265#define ACTIVE_33V 0x0040
266#define INIT_DONE 0x0080
267#define SI_BUSY 0x0100
268#define EEPROM_PRESENT 0x0200
269#define EEPROM_OK 0x0400
270#define EL_PRESENT 0x0800
271#define EE_SIZE_64 0x1000
272
273/* PP_BusST - ISA Bus Status bit definition */
274#define TX_BID_ERROR 0x0080
275#define READY_FOR_TX_NOW 0x0100
276
277/* PP_AutoNegCTL - Auto Negotiation Control bit definition */
278#define RE_NEG_NOW 0x0040
279#define ALLOW_FDX 0x0080
280#define AUTO_NEG_ENABLE 0x0100
281#define NLP_ENABLE 0x0200
282#define FORCE_FDX 0x8000
283#define AUTO_NEG_BITS (FORCE_FDX|NLP_ENABLE|AUTO_NEG_ENABLE)
284#define AUTO_NEG_MASK (FORCE_FDX|NLP_ENABLE|AUTO_NEG_ENABLE|ALLOW_FDX|RE_NEG_NOW)
285
286/* PP_AutoNegST - Auto Negotiation Status bit definition */
287#define AUTO_NEG_BUSY 0x0080
288#define FLP_LINK 0x0100
289#define FLP_LINK_GOOD 0x0800
290#define LINK_FAULT 0x1000
291#define HDX_ACTIVE 0x4000
292#define FDX_ACTIVE 0x8000
293
294/* The following block defines the ISQ event types */
295#define ISQ_RECEIVER_EVENT 0x04
296#define ISQ_TRANSMITTER_EVENT 0x08
297#define ISQ_BUFFER_EVENT 0x0c
298#define ISQ_RX_MISS_EVENT 0x10
299#define ISQ_TX_COL_EVENT 0x12
300
301#define ISQ_EVENT_MASK 0x003F /* ISQ mask to find out type of event */
302#define ISQ_HIST 16 /* small history buffer */
303#define AUTOINCREMENT 0x8000 /* Bit mask to set bit-15 for autoincrement */
304
305#define TXRXBUFSIZE 0x0600
306#define RXDMABUFSIZE 0x8000
307#define RXDMASIZE 0x4000
308#define TXRX_LENGTH_MASK 0x07FF
309
310/* rx options bits */
311#define RCV_WITH_RXON 1 /* Set SerRx ON */
312#define RCV_COUNTS 2 /* Use Framecnt1 */
313#define RCV_PONG 4 /* Pong respondent */
314#define RCV_DONG 8 /* Dong operation */
315#define RCV_POLLING 0x10 /* Poll RxEvent */
316#define RCV_ISQ 0x20 /* Use ISQ, int */
317#define RCV_AUTO_DMA 0x100 /* Set AutoRxDMAE */
318#define RCV_DMA 0x200 /* Set RxDMA only */
319#define RCV_DMA_ALL 0x400 /* Copy all DMA'ed */
320#define RCV_FIXED_DATA 0x800 /* Every frame same */
321#define RCV_IO 0x1000 /* Use ISA IO only */
322#define RCV_MEMORY 0x2000 /* Use ISA Memory */
323
324#define RAM_SIZE 0x1000 /* The card has 4k bytes or RAM */
325#define PKT_START PP_TxFrame /* Start of packet RAM */
326
Lennert Buytenhek3b68d702006-01-08 01:01:11 -0800327#define RX_FRAME_PORT 0x0000
Linus Torvalds1da177e2005-04-16 15:20:36 -0700328#define TX_FRAME_PORT RX_FRAME_PORT
Lennert Buytenhek3b68d702006-01-08 01:01:11 -0800329#define TX_CMD_PORT 0x0004
Linus Torvalds1da177e2005-04-16 15:20:36 -0700330#define TX_NOW 0x0000 /* Tx packet after 5 bytes copied */
331#define TX_AFTER_381 0x0040 /* Tx packet after 381 bytes copied */
332#define TX_AFTER_ALL 0x00c0 /* Tx packet after all bytes copied */
Lennert Buytenhek3b68d702006-01-08 01:01:11 -0800333#define TX_LEN_PORT 0x0006
334#define ISQ_PORT 0x0008
335#define ADD_PORT 0x000A
336#define DATA_PORT 0x000C
Linus Torvalds1da177e2005-04-16 15:20:36 -0700337
338#define EEPROM_WRITE_EN 0x00F0
339#define EEPROM_WRITE_DIS 0x0000
340#define EEPROM_WRITE_CMD 0x0100
341#define EEPROM_READ_CMD 0x0200
342
343/* Receive Header */
344/* Description of header of each packet in receive area of memory */
345#define RBUF_EVENT_LOW 0 /* Low byte of RxEvent - status of received frame */
346#define RBUF_EVENT_HIGH 1 /* High byte of RxEvent - status of received frame */
347#define RBUF_LEN_LOW 2 /* Length of received data - low byte */
348#define RBUF_LEN_HI 3 /* Length of received data - high byte */
349#define RBUF_HEAD_LEN 4 /* Length of this header */
350
351#define CHIP_READ 0x1 /* Used to mark state of the repins code (chip or dma) */
352#define DMA_READ 0x2 /* Used to mark state of the repins code (chip or dma) */
353
354/* for bios scan */
355/* */
356#ifdef CSDEBUG
357/* use these values for debugging bios scan */
358#define BIOS_START_SEG 0x00000
359#define BIOS_OFFSET_INC 0x0010
360#else
361#define BIOS_START_SEG 0x0c000
362#define BIOS_OFFSET_INC 0x0200
363#endif
364
365#define BIOS_LAST_OFFSET 0x0fc00
366
367/* Byte offsets into the EEPROM configuration buffer */
368#define ISA_CNF_OFFSET 0x6
369#define TX_CTL_OFFSET (ISA_CNF_OFFSET + 8) /* 8900 eeprom */
370#define AUTO_NEG_CNF_OFFSET (ISA_CNF_OFFSET + 8) /* 8920 eeprom */
371
372 /* the assumption here is that the bits in the eeprom are generally */
373 /* in the same position as those in the autonegctl register. */
374 /* Of course the IMM bit is not in that register so it must be */
375 /* masked out */
376#define EE_FORCE_FDX 0x8000
377#define EE_NLP_ENABLE 0x0200
378#define EE_AUTO_NEG_ENABLE 0x0100
379#define EE_ALLOW_FDX 0x0080
380#define EE_AUTO_NEG_CNF_MASK (EE_FORCE_FDX|EE_NLP_ENABLE|EE_AUTO_NEG_ENABLE|EE_ALLOW_FDX)
381
382#define IMM_BIT 0x0040 /* ignore missing media */
383
384#define ADAPTER_CNF_OFFSET (AUTO_NEG_CNF_OFFSET + 2)
385#define A_CNF_10B_T 0x0001
386#define A_CNF_AUI 0x0002
387#define A_CNF_10B_2 0x0004
388#define A_CNF_MEDIA_TYPE 0x0070
389#define A_CNF_MEDIA_AUTO 0x0070
390#define A_CNF_MEDIA_10B_T 0x0020
391#define A_CNF_MEDIA_AUI 0x0040
392#define A_CNF_MEDIA_10B_2 0x0010
393#define A_CNF_DC_DC_POLARITY 0x0080
394#define A_CNF_NO_AUTO_POLARITY 0x2000
395#define A_CNF_LOW_RX_SQUELCH 0x4000
396#define A_CNF_EXTND_10B_2 0x8000
397
398#define PACKET_PAGE_OFFSET 0x8
399
400/* Bit definitions for the ISA configuration word from the EEPROM */
401#define INT_NO_MASK 0x000F
402#define DMA_NO_MASK 0x0070
403#define ISA_DMA_SIZE 0x0200
404#define ISA_AUTO_RxDMA 0x0400
405#define ISA_RxDMA 0x0800
406#define DMA_BURST 0x1000
407#define STREAM_TRANSFER 0x2000
408#define ANY_ISA_DMA (ISA_AUTO_RxDMA | ISA_RxDMA)
409
410/* DMA controller registers */
411#define DMA_BASE 0x00 /* DMA controller base */
412#define DMA_BASE_2 0x0C0 /* DMA controller base */
413
414#define DMA_STAT 0x0D0 /* DMA controller status register */
415#define DMA_MASK 0x0D4 /* DMA controller mask register */
416#define DMA_MODE 0x0D6 /* DMA controller mode register */
417#define DMA_RESETFF 0x0D8 /* DMA controller first/last flip flop */
418
419/* DMA data */
420#define DMA_DISABLE 0x04 /* Disable channel n */
421#define DMA_ENABLE 0x00 /* Enable channel n */
422/* Demand transfers, incr. address, auto init, writes, ch. n */
423#define DMA_RX_MODE 0x14
424/* Demand transfers, incr. address, auto init, reads, ch. n */
425#define DMA_TX_MODE 0x18
426
427#define DMA_SIZE (16*1024) /* Size of dma buffer - 16k */
428
429#define CS8900 0x0000
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400430#define CS8920 0x4000
431#define CS8920M 0x6000
Linus Torvalds1da177e2005-04-16 15:20:36 -0700432#define REVISON_BITS 0x1F00
433#define EEVER_NUMBER 0x12
434#define CHKSUM_LEN 0x14
435#define CHKSUM_VAL 0x0000
436#define START_EEPROM_DATA 0x001c /* Offset into eeprom for start of data */
437#define IRQ_MAP_EEPROM_DATA 0x0046 /* Offset into eeprom for the IRQ map */
438#define IRQ_MAP_LEN 0x0004 /* No of bytes to read for the IRQ map */
439#define PNP_IRQ_FRMT 0x0022 /* PNP small item IRQ format */
440#ifdef CONFIG_SH_HICOSH4
441#define CS8900_IRQ_MAP 0x0002 /* HiCO-SH4 board has its IRQ on #1 */
442#else
443#define CS8900_IRQ_MAP 0x1c20 /* This IRQ map is fixed */
444#endif
445
446#define CS8920_NO_INTS 0x0F /* Max CS8920 interrupt select # */
447
448#define PNP_ADD_PORT 0x0279
449#define PNP_WRITE_PORT 0x0A79
450
451#define GET_PNP_ISA_STRUCT 0x40
452#define PNP_ISA_STRUCT_LEN 0x06
453#define PNP_CSN_CNT_OFF 0x01
454#define PNP_RD_PORT_OFF 0x02
455#define PNP_FUNCTION_OK 0x00
456#define PNP_WAKE 0x03
457#define PNP_RSRC_DATA 0x04
458#define PNP_RSRC_READY 0x01
459#define PNP_STATUS 0x05
460#define PNP_ACTIVATE 0x30
461#define PNP_CNF_IO_H 0x60
462#define PNP_CNF_IO_L 0x61
463#define PNP_CNF_INT 0x70
464#define PNP_CNF_DMA 0x74
465#define PNP_CNF_MEM 0x48
466
467#define BIT0 1
468#define BIT15 0x8000
469