blob: 0343f12d2ffb452bc75f220f14eb2ec360feae92 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/* isa-skeleton.c: A network driver outline for linux.
2 *
3 * Written 1993-94 by Donald Becker.
4 *
5 * Copyright 1993 United States Government as represented by the
6 * Director, National Security Agency.
7 *
8 * This software may be used and distributed according to the terms
9 * of the GNU General Public License, incorporated herein by reference.
10 *
11 * The author may be reached as becker@scyld.com, or C/O
12 * Scyld Computing Corporation
13 * 410 Severn Ave., Suite 210
14 * Annapolis MD 21403
15 *
16 * This file is an outline for writing a network device driver for the
17 * the Linux operating system.
18 *
19 * To write (or understand) a driver, have a look at the "loopback.c" file to
20 * get a feel of what is going on, and then use the code below as a skeleton
21 * for the new driver.
22 *
23 */
24
25static const char *version =
26 "isa-skeleton.c:v1.51 9/24/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
27
28/*
29 * Sources:
30 * List your sources of programming information to document that
31 * the driver is your own creation, and give due credit to others
32 * that contributed to the work. Remember that GNU project code
33 * cannot use proprietary or trade secret information. Interface
34 * definitions are generally considered non-copyrightable to the
35 * extent that the same names and structures must be used to be
36 * compatible.
37 *
38 * Finally, keep in mind that the Linux kernel is has an API, not
39 * ABI. Proprietary object-code-only distributions are not permitted
40 * under the GPL.
41 */
42
43#include <linux/module.h>
44#include <linux/kernel.h>
45#include <linux/types.h>
46#include <linux/fcntl.h>
47#include <linux/interrupt.h>
48#include <linux/ioport.h>
49#include <linux/in.h>
50#include <linux/slab.h>
51#include <linux/string.h>
52#include <linux/spinlock.h>
53#include <linux/errno.h>
54#include <linux/init.h>
55#include <linux/netdevice.h>
56#include <linux/etherdevice.h>
57#include <linux/skbuff.h>
58#include <linux/bitops.h>
59
60#include <asm/system.h>
61#include <asm/io.h>
62#include <asm/dma.h>
63
64/*
65 * The name of the card. Is used for messages and in the requests for
66 * io regions, irqs and dma channels
67 */
68static const char* cardname = "netcard";
69
70/* First, a few definitions that the brave might change. */
71
72/* A zero-terminated list of I/O addresses to be probed. */
73static unsigned int netcard_portlist[] __initdata =
74 { 0x200, 0x240, 0x280, 0x2C0, 0x300, 0x320, 0x340, 0};
75
76/* use 0 for production, 1 for verification, >2 for debug */
77#ifndef NET_DEBUG
78#define NET_DEBUG 2
79#endif
80static unsigned int net_debug = NET_DEBUG;
81
82/* The number of low I/O ports used by the ethercard. */
83#define NETCARD_IO_EXTENT 32
84
85#define MY_TX_TIMEOUT ((400*HZ)/1000)
86
87/* Information that need to be kept for each board. */
88struct net_local {
89 struct net_device_stats stats;
90 long open_time; /* Useless example local info. */
91
92 /* Tx control lock. This protects the transmit buffer ring
93 * state along with the "tx full" state of the driver. This
94 * means all netif_queue flow control actions are protected
95 * by this lock as well.
96 */
97 spinlock_t lock;
98};
99
100/* The station (ethernet) address prefix, used for IDing the board. */
101#define SA_ADDR0 0x00
102#define SA_ADDR1 0x42
103#define SA_ADDR2 0x65
104
105/* Index to functions, as function prototypes. */
106
107static int netcard_probe1(struct net_device *dev, int ioaddr);
108static int net_open(struct net_device *dev);
109static int net_send_packet(struct sk_buff *skb, struct net_device *dev);
David Howells7d12e782006-10-05 14:55:46 +0100110static irqreturn_t net_interrupt(int irq, void *dev_id);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700111static void net_rx(struct net_device *dev);
112static int net_close(struct net_device *dev);
113static struct net_device_stats *net_get_stats(struct net_device *dev);
114static void set_multicast_list(struct net_device *dev);
115static void net_tx_timeout(struct net_device *dev);
116
117
118/* Example routines you must write ;->. */
119#define tx_done(dev) 1
120static void hardware_send_packet(short ioaddr, char *buf, int length);
121static void chipset_init(struct net_device *dev, int startp);
122
123/*
124 * Check for a network adaptor of this type, and return '0' iff one exists.
125 * If dev->base_addr == 0, probe all likely locations.
126 * If dev->base_addr == 1, always return failure.
127 * If dev->base_addr == 2, allocate space for the device and return success
128 * (detachable devices only).
129 */
130static int __init do_netcard_probe(struct net_device *dev)
131{
132 int i;
133 int base_addr = dev->base_addr;
134 int irq = dev->irq;
135
136 SET_MODULE_OWNER(dev);
137
138 if (base_addr > 0x1ff) /* Check a single specified location. */
139 return netcard_probe1(dev, base_addr);
140 else if (base_addr != 0) /* Don't probe at all. */
141 return -ENXIO;
142
143 for (i = 0; netcard_portlist[i]; i++) {
144 int ioaddr = netcard_portlist[i];
145 if (netcard_probe1(dev, ioaddr) == 0)
146 return 0;
147 dev->irq = irq;
148 }
149
150 return -ENODEV;
151}
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400152
Linus Torvalds1da177e2005-04-16 15:20:36 -0700153static void cleanup_card(struct net_device *dev)
154{
155#ifdef jumpered_dma
156 free_dma(dev->dma);
157#endif
158#ifdef jumpered_interrupts
159 free_irq(dev->irq, dev);
160#endif
161 release_region(dev->base_addr, NETCARD_IO_EXTENT);
162}
163
164#ifndef MODULE
165struct net_device * __init netcard_probe(int unit)
166{
167 struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
168 int err;
169
170 if (!dev)
171 return ERR_PTR(-ENOMEM);
172
173 sprintf(dev->name, "eth%d", unit);
174 netdev_boot_setup_check(dev);
175
176 err = do_netcard_probe(dev);
177 if (err)
178 goto out;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700179 return dev;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700180out:
181 free_netdev(dev);
182 return ERR_PTR(err);
183}
184#endif
185
186/*
187 * This is the real probe routine. Linux has a history of friendly device
188 * probes on the ISA bus. A good device probes avoids doing writes, and
189 * verifies that the correct device exists and functions.
190 */
191static int __init netcard_probe1(struct net_device *dev, int ioaddr)
192{
193 struct net_local *np;
194 static unsigned version_printed;
195 int i;
196 int err = -ENODEV;
197
198 /* Grab the region so that no one else tries to probe our ioports. */
199 if (!request_region(ioaddr, NETCARD_IO_EXTENT, cardname))
200 return -EBUSY;
201
202 /*
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400203 * For ethernet adaptors the first three octets of the station address
Linus Torvalds1da177e2005-04-16 15:20:36 -0700204 * contains the manufacturer's unique code. That might be a good probe
205 * method. Ideally you would add additional checks.
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400206 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700207 if (inb(ioaddr + 0) != SA_ADDR0
208 || inb(ioaddr + 1) != SA_ADDR1
209 || inb(ioaddr + 2) != SA_ADDR2)
210 goto out;
211
212 if (net_debug && version_printed++ == 0)
213 printk(KERN_DEBUG "%s", version);
214
215 printk(KERN_INFO "%s: %s found at %#3x, ", dev->name, cardname, ioaddr);
216
217 /* Fill in the 'dev' fields. */
218 dev->base_addr = ioaddr;
219
220 /* Retrieve and print the ethernet address. */
221 for (i = 0; i < 6; i++)
222 printk(" %2.2x", dev->dev_addr[i] = inb(ioaddr + i));
223
224 err = -EAGAIN;
225#ifdef jumpered_interrupts
226 /*
227 * If this board has jumpered interrupts, allocate the interrupt
228 * vector now. There is no point in waiting since no other device
229 * can use the interrupt, and this marks the irq as busy. Jumpered
230 * interrupts are typically not reported by the boards, and we must
231 * used autoIRQ to find them.
232 */
233
234 if (dev->irq == -1)
235 ; /* Do nothing: a user-level program will set it. */
236 else if (dev->irq < 2) { /* "Auto-IRQ" */
237 unsigned long irq_mask = probe_irq_on();
238 /* Trigger an interrupt here. */
239
240 dev->irq = probe_irq_off(irq_mask);
241 if (net_debug >= 2)
242 printk(" autoirq is %d", dev->irq);
243 } else if (dev->irq == 2)
244 /*
245 * Fixup for users that don't know that IRQ 2 is really
246 * IRQ9, or don't know which one to set.
247 */
248 dev->irq = 9;
249
250 {
251 int irqval = request_irq(dev->irq, &net_interrupt, 0, cardname, dev);
252 if (irqval) {
253 printk("%s: unable to get IRQ %d (irqval=%d).\n",
254 dev->name, dev->irq, irqval);
255 goto out;
256 }
257 }
258#endif /* jumpered interrupt */
259#ifdef jumpered_dma
260 /*
261 * If we use a jumpered DMA channel, that should be probed for and
262 * allocated here as well. See lance.c for an example.
263 */
264 if (dev->dma == 0) {
265 if (request_dma(dev->dma, cardname)) {
266 printk("DMA %d allocation failed.\n", dev->dma);
267 goto out1;
268 } else
269 printk(", assigned DMA %d.\n", dev->dma);
270 } else {
271 short dma_status, new_dma_status;
272
273 /* Read the DMA channel status registers. */
274 dma_status = ((inb(DMA1_STAT_REG) >> 4) & 0x0f) |
275 (inb(DMA2_STAT_REG) & 0xf0);
276 /* Trigger a DMA request, perhaps pause a bit. */
277 outw(0x1234, ioaddr + 8);
278 /* Re-read the DMA status registers. */
279 new_dma_status = ((inb(DMA1_STAT_REG) >> 4) & 0x0f) |
280 (inb(DMA2_STAT_REG) & 0xf0);
281 /*
282 * Eliminate the old and floating requests,
283 * and DMA4 the cascade.
284 */
285 new_dma_status ^= dma_status;
286 new_dma_status &= ~0x10;
287 for (i = 7; i > 0; i--)
288 if (test_bit(i, &new_dma_status)) {
289 dev->dma = i;
290 break;
291 }
292 if (i <= 0) {
293 printk("DMA probe failed.\n");
294 goto out1;
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400295 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700296 if (request_dma(dev->dma, cardname)) {
297 printk("probed DMA %d allocation failed.\n", dev->dma);
298 goto out1;
299 }
300 }
301#endif /* jumpered DMA */
302
303 np = netdev_priv(dev);
304 spin_lock_init(&np->lock);
305
306 dev->open = net_open;
307 dev->stop = net_close;
308 dev->hard_start_xmit = net_send_packet;
309 dev->get_stats = net_get_stats;
310 dev->set_multicast_list = &set_multicast_list;
311
312 dev->tx_timeout = &net_tx_timeout;
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400313 dev->watchdog_timeo = MY_TX_TIMEOUT;
b1fc5502005-05-12 20:11:55 -0400314
315 err = register_netdev(dev);
316 if (err)
317 goto out2;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700318 return 0;
b1fc5502005-05-12 20:11:55 -0400319out2:
320#ifdef jumpered_dma
321 free_dma(dev->dma);
322#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -0700323out1:
324#ifdef jumpered_interrupts
325 free_irq(dev->irq, dev);
326#endif
327out:
328 release_region(base_addr, NETCARD_IO_EXTENT);
329 return err;
330}
331
332static void net_tx_timeout(struct net_device *dev)
333{
334 struct net_local *np = netdev_priv(dev);
335
336 printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name,
337 tx_done(dev) ? "IRQ conflict" : "network cable problem");
338
339 /* Try to restart the adaptor. */
340 chipset_init(dev, 1);
341
342 np->stats.tx_errors++;
343
344 /* If we have space available to accept new transmit
345 * requests, wake up the queueing layer. This would
346 * be the case if the chipset_init() call above just
347 * flushes out the tx queue and empties it.
348 *
349 * If instead, the tx queue is retained then the
350 * netif_wake_queue() call should be placed in the
351 * TX completion interrupt handler of the driver instead
352 * of here.
353 */
354 if (!tx_full(dev))
355 netif_wake_queue(dev);
356}
357
358/*
359 * Open/initialize the board. This is called (in the current kernel)
360 * sometime after booting when the 'ifconfig' program is run.
361 *
362 * This routine should set everything up anew at each open, even
363 * registers that "should" only need to be set once at boot, so that
364 * there is non-reboot way to recover if something goes wrong.
365 */
366static int
367net_open(struct net_device *dev)
368{
369 struct net_local *np = netdev_priv(dev);
370 int ioaddr = dev->base_addr;
371 /*
372 * This is used if the interrupt line can turned off (shared).
373 * See 3c503.c for an example of selecting the IRQ at config-time.
374 */
375 if (request_irq(dev->irq, &net_interrupt, 0, cardname, dev)) {
376 return -EAGAIN;
377 }
378 /*
379 * Always allocate the DMA channel after the IRQ,
380 * and clean up on failure.
381 */
382 if (request_dma(dev->dma, cardname)) {
383 free_irq(dev->irq, dev);
384 return -EAGAIN;
385 }
386
387 /* Reset the hardware here. Don't forget to set the station address. */
388 chipset_init(dev, 1);
389 outb(0x00, ioaddr);
390 np->open_time = jiffies;
391
392 /* We are now ready to accept transmit requeusts from
393 * the queueing layer of the networking.
394 */
395 netif_start_queue(dev);
396
397 return 0;
398}
399
400/* This will only be invoked if your driver is _not_ in XOFF state.
401 * What this means is that you need not check it, and that this
402 * invariant will hold if you make sure that the netif_*_queue()
403 * calls are done at the proper times.
404 */
405static int net_send_packet(struct sk_buff *skb, struct net_device *dev)
406{
407 struct net_local *np = netdev_priv(dev);
408 int ioaddr = dev->base_addr;
409 short length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
410 unsigned char *buf = skb->data;
411
412 /* If some error occurs while trying to transmit this
413 * packet, you should return '1' from this function.
414 * In such a case you _may not_ do anything to the
415 * SKB, it is still owned by the network queueing
416 * layer when an error is returned. This means you
417 * may not modify any SKB fields, you may not free
418 * the SKB, etc.
419 */
420
421#if TX_RING
422 /* This is the most common case for modern hardware.
423 * The spinlock protects this code from the TX complete
424 * hardware interrupt handler. Queue flow control is
425 * thus managed under this lock as well.
426 */
427 spin_lock_irq(&np->lock);
428
429 add_to_tx_ring(np, skb, length);
430 dev->trans_start = jiffies;
431
432 /* If we just used up the very last entry in the
433 * TX ring on this device, tell the queueing
434 * layer to send no more.
435 */
436 if (tx_full(dev))
437 netif_stop_queue(dev);
438
439 /* When the TX completion hw interrupt arrives, this
440 * is when the transmit statistics are updated.
441 */
442
443 spin_unlock_irq(&np->lock);
444#else
445 /* This is the case for older hardware which takes
446 * a single transmit buffer at a time, and it is
447 * just written to the device via PIO.
448 *
449 * No spin locking is needed since there is no TX complete
450 * event. If by chance your card does have a TX complete
451 * hardware IRQ then you may need to utilize np->lock here.
452 */
453 hardware_send_packet(ioaddr, buf, length);
454 np->stats.tx_bytes += skb->len;
455
456 dev->trans_start = jiffies;
457
458 /* You might need to clean up and record Tx statistics here. */
459 if (inw(ioaddr) == /*RU*/81)
460 np->stats.tx_aborted_errors++;
461 dev_kfree_skb (skb);
462#endif
463
464 return 0;
465}
466
467#if TX_RING
468/* This handles TX complete events posted by the device
469 * via interrupts.
470 */
471void net_tx(struct net_device *dev)
472{
473 struct net_local *np = netdev_priv(dev);
474 int entry;
475
476 /* This protects us from concurrent execution of
477 * our dev->hard_start_xmit function above.
478 */
479 spin_lock(&np->lock);
480
481 entry = np->tx_old;
482 while (tx_entry_is_sent(np, entry)) {
483 struct sk_buff *skb = np->skbs[entry];
484
485 np->stats.tx_bytes += skb->len;
486 dev_kfree_skb_irq (skb);
487
488 entry = next_tx_entry(np, entry);
489 }
490 np->tx_old = entry;
491
492 /* If we had stopped the queue due to a "tx full"
493 * condition, and space has now been made available,
494 * wake up the queue.
495 */
496 if (netif_queue_stopped(dev) && ! tx_full(dev))
497 netif_wake_queue(dev);
498
499 spin_unlock(&np->lock);
500}
501#endif
502
503/*
504 * The typical workload of the driver:
505 * Handle the network interface interrupts.
506 */
David Howells7d12e782006-10-05 14:55:46 +0100507static irqreturn_t net_interrupt(int irq, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700508{
509 struct net_device *dev = dev_id;
510 struct net_local *np;
511 int ioaddr, status;
512 int handled = 0;
513
514 ioaddr = dev->base_addr;
515
516 np = netdev_priv(dev);
517 status = inw(ioaddr + 0);
518
519 if (status == 0)
520 goto out;
521 handled = 1;
522
523 if (status & RX_INTR) {
524 /* Got a packet(s). */
525 net_rx(dev);
526 }
527#if TX_RING
528 if (status & TX_INTR) {
529 /* Transmit complete. */
530 net_tx(dev);
531 np->stats.tx_packets++;
532 netif_wake_queue(dev);
533 }
534#endif
535 if (status & COUNTERS_INTR) {
536 /* Increment the appropriate 'localstats' field. */
537 np->stats.tx_window_errors++;
538 }
539out:
540 return IRQ_RETVAL(handled);
541}
542
543/* We have a good packet(s), get it/them out of the buffers. */
544static void
545net_rx(struct net_device *dev)
546{
547 struct net_local *lp = netdev_priv(dev);
548 int ioaddr = dev->base_addr;
549 int boguscount = 10;
550
551 do {
552 int status = inw(ioaddr);
553 int pkt_len = inw(ioaddr);
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400554
Linus Torvalds1da177e2005-04-16 15:20:36 -0700555 if (pkt_len == 0) /* Read all the frames? */
556 break; /* Done for now */
557
558 if (status & 0x40) { /* There was an error. */
559 lp->stats.rx_errors++;
560 if (status & 0x20) lp->stats.rx_frame_errors++;
561 if (status & 0x10) lp->stats.rx_over_errors++;
562 if (status & 0x08) lp->stats.rx_crc_errors++;
563 if (status & 0x04) lp->stats.rx_fifo_errors++;
564 } else {
565 /* Malloc up new buffer. */
566 struct sk_buff *skb;
567
568 lp->stats.rx_bytes+=pkt_len;
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400569
Linus Torvalds1da177e2005-04-16 15:20:36 -0700570 skb = dev_alloc_skb(pkt_len);
571 if (skb == NULL) {
572 printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n",
573 dev->name);
574 lp->stats.rx_dropped++;
575 break;
576 }
577 skb->dev = dev;
578
579 /* 'skb->data' points to the start of sk_buff data area. */
580 memcpy(skb_put(skb,pkt_len), (void*)dev->rmem_start,
581 pkt_len);
582 /* or */
583 insw(ioaddr, skb->data, (pkt_len + 1) >> 1);
584
585 netif_rx(skb);
586 dev->last_rx = jiffies;
587 lp->stats.rx_packets++;
588 lp->stats.rx_bytes += pkt_len;
589 }
590 } while (--boguscount);
591
592 return;
593}
594
595/* The inverse routine to net_open(). */
596static int
597net_close(struct net_device *dev)
598{
599 struct net_local *lp = netdev_priv(dev);
600 int ioaddr = dev->base_addr;
601
602 lp->open_time = 0;
603
604 netif_stop_queue(dev);
605
606 /* Flush the Tx and disable Rx here. */
607
608 disable_dma(dev->dma);
609
610 /* If not IRQ or DMA jumpered, free up the line. */
611 outw(0x00, ioaddr+0); /* Release the physical interrupt line. */
612
613 free_irq(dev->irq, dev);
614 free_dma(dev->dma);
615
616 /* Update the statistics here. */
617
618 return 0;
619
620}
621
622/*
623 * Get the current statistics.
624 * This may be called with the card open or closed.
625 */
626static struct net_device_stats *net_get_stats(struct net_device *dev)
627{
628 struct net_local *lp = netdev_priv(dev);
629 short ioaddr = dev->base_addr;
630
631 /* Update the statistics from the device registers. */
632 lp->stats.rx_missed_errors = inw(ioaddr+1);
633 return &lp->stats;
634}
635
636/*
637 * Set or clear the multicast filter for this adaptor.
638 * num_addrs == -1 Promiscuous mode, receive all packets
639 * num_addrs == 0 Normal mode, clear multicast list
640 * num_addrs > 0 Multicast mode, receive normal and MC packets,
641 * and do best-effort filtering.
642 */
643static void
644set_multicast_list(struct net_device *dev)
645{
646 short ioaddr = dev->base_addr;
647 if (dev->flags&IFF_PROMISC)
648 {
649 /* Enable promiscuous mode */
650 outw(MULTICAST|PROMISC, ioaddr);
651 }
652 else if((dev->flags&IFF_ALLMULTI) || dev->mc_count > HW_MAX_ADDRS)
653 {
654 /* Disable promiscuous mode, use normal mode. */
655 hardware_set_filter(NULL);
656
657 outw(MULTICAST, ioaddr);
658 }
659 else if(dev->mc_count)
660 {
661 /* Walk the address list, and load the filter */
662 hardware_set_filter(dev->mc_list);
663
664 outw(MULTICAST, ioaddr);
665 }
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400666 else
Linus Torvalds1da177e2005-04-16 15:20:36 -0700667 outw(0, ioaddr);
668}
669
670#ifdef MODULE
671
672static struct net_device *this_device;
673static int io = 0x300;
674static int irq;
675static int dma;
676static int mem;
677MODULE_LICENSE("GPL");
678
679int init_module(void)
680{
681 struct net_device *dev;
682 int result;
683
684 if (io == 0)
685 printk(KERN_WARNING "%s: You shouldn't use auto-probing with insmod!\n",
686 cardname);
687 dev = alloc_etherdev(sizeof(struct net_local));
688 if (!dev)
689 return -ENOMEM;
690
691 /* Copy the parameters from insmod into the device structure. */
692 dev->base_addr = io;
693 dev->irq = irq;
694 dev->dma = dma;
695 dev->mem_start = mem;
696 if (do_netcard_probe(dev) == 0) {
b1fc5502005-05-12 20:11:55 -0400697 this_device = dev;
698 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700699 }
700 free_netdev(dev);
701 return -ENXIO;
702}
703
704void
705cleanup_module(void)
706{
707 unregister_netdev(this_device);
708 cleanup_card(this_device);
709 free_netdev(this_device);
710}
711
712#endif /* MODULE */
713
714/*
715 * Local variables:
716 * compile-command:
717 * gcc -D__KERNEL__ -Wall -Wstrict-prototypes -Wwrite-strings
718 * -Wredundant-decls -O2 -m486 -c skeleton.c
719 * version-control: t
720 * kept-new-versions: 5
721 * tab-width: 4
722 * c-indent-level: 4
723 * End:
724 */