blob: cf4330b352ef2c9b439b1685c5d94ad29eba31f4 [file] [log] [blame]
Jonathan Cameron251eb402009-04-13 14:39:45 -07001/*
2 * sht15.c - support for the SHT15 Temperature and Humidity Sensor
3 *
Vivien Didelotcc15c7e2011-04-12 15:34:38 -04004 * Portions Copyright (c) 2010-2011 Savoir-faire Linux Inc.
Jerome Oufella82c74652011-04-12 15:34:39 -04005 * Jerome Oufella <jerome.oufella@savoirfairelinux.com>
Vivien Didelotcc15c7e2011-04-12 15:34:38 -04006 * Vivien Didelot <vivien.didelot@savoirfairelinux.com>
7 *
Jonathan Cameron251eb402009-04-13 14:39:45 -07008 * Copyright (c) 2009 Jonathan Cameron
9 *
10 * Copyright (c) 2007 Wouter Horre
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License version 2 as
14 * published by the Free Software Foundation.
15 *
Vivien Didelot99a03782011-04-12 15:34:36 -040016 * For further information, see the Documentation/hwmon/sht15 file.
Jonathan Cameron251eb402009-04-13 14:39:45 -070017 */
18
19#include <linux/interrupt.h>
20#include <linux/irq.h>
21#include <linux/gpio.h>
22#include <linux/module.h>
23#include <linux/init.h>
24#include <linux/hwmon.h>
25#include <linux/hwmon-sysfs.h>
26#include <linux/mutex.h>
27#include <linux/platform_device.h>
Alexey Dobriyand43c36d2009-10-07 17:09:06 +040028#include <linux/sched.h>
Jonathan Cameron251eb402009-04-13 14:39:45 -070029#include <linux/delay.h>
30#include <linux/jiffies.h>
31#include <linux/err.h>
32#include <linux/sht15.h>
33#include <linux/regulator/consumer.h>
Tejun Heo5a0e3ad2010-03-24 17:04:11 +090034#include <linux/slab.h>
Jonathan Cameron251eb402009-04-13 14:39:45 -070035#include <asm/atomic.h>
36
Vivien Didelot99a03782011-04-12 15:34:36 -040037/* Commands */
38#define SHT15_MEASURE_TEMP 0x03
39#define SHT15_MEASURE_RH 0x05
Vivien Didelotcc15c7e2011-04-12 15:34:38 -040040#define SHT15_WRITE_STATUS 0x06
41#define SHT15_READ_STATUS 0x07
Vivien Didelot181148a2011-04-12 15:34:37 -040042#define SHT15_SOFT_RESET 0x1E
Jonathan Cameron251eb402009-04-13 14:39:45 -070043
Vivien Didelot99a03782011-04-12 15:34:36 -040044/* Min timings */
45#define SHT15_TSCKL 100 /* (nsecs) clock low */
46#define SHT15_TSCKH 100 /* (nsecs) clock high */
47#define SHT15_TSU 150 /* (nsecs) data setup time */
Vivien Didelot181148a2011-04-12 15:34:37 -040048#define SHT15_TSRST 11 /* (msecs) soft reset time */
Jonathan Cameron251eb402009-04-13 14:39:45 -070049
Vivien Didelotcc15c7e2011-04-12 15:34:38 -040050/* Status Register Bits */
51#define SHT15_STATUS_LOW_RESOLUTION 0x01
52#define SHT15_STATUS_NO_OTP_RELOAD 0x02
53#define SHT15_STATUS_HEATER 0x04
54#define SHT15_STATUS_LOW_BATTERY 0x40
55
Vivien Didelot99a03782011-04-12 15:34:36 -040056/* Actions the driver may be doing */
57enum sht15_state {
58 SHT15_READING_NOTHING,
59 SHT15_READING_TEMP,
60 SHT15_READING_HUMID
61};
Jonathan Cameron251eb402009-04-13 14:39:45 -070062
63/**
Lucas De Marchi25985ed2011-03-30 22:57:33 -030064 * struct sht15_temppair - elements of voltage dependent temp calc
Jonathan Cameron251eb402009-04-13 14:39:45 -070065 * @vdd: supply voltage in microvolts
66 * @d1: see data sheet
67 */
68struct sht15_temppair {
69 int vdd; /* microvolts */
70 int d1;
71};
72
Vivien Didelot99a03782011-04-12 15:34:36 -040073/* Table 9 from datasheet - relates temperature calculation to supply voltage */
Jonathan Cameron251eb402009-04-13 14:39:45 -070074static const struct sht15_temppair temppoints[] = {
75 { 2500000, -39400 },
76 { 3000000, -39600 },
77 { 3500000, -39700 },
78 { 4000000, -39800 },
79 { 5000000, -40100 },
80};
81
Jerome Oufella82c74652011-04-12 15:34:39 -040082/* Table from CRC datasheet, section 2.4 */
83static const u8 sht15_crc8_table[] = {
84 0, 49, 98, 83, 196, 245, 166, 151,
85 185, 136, 219, 234, 125, 76, 31, 46,
86 67, 114, 33, 16, 135, 182, 229, 212,
87 250, 203, 152, 169, 62, 15, 92, 109,
88 134, 183, 228, 213, 66, 115, 32, 17,
89 63, 14, 93, 108, 251, 202, 153, 168,
90 197, 244, 167, 150, 1, 48, 99, 82,
91 124, 77, 30, 47, 184, 137, 218, 235,
92 61, 12, 95, 110, 249, 200, 155, 170,
93 132, 181, 230, 215, 64, 113, 34, 19,
94 126, 79, 28, 45, 186, 139, 216, 233,
95 199, 246, 165, 148, 3, 50, 97, 80,
96 187, 138, 217, 232, 127, 78, 29, 44,
97 2, 51, 96, 81, 198, 247, 164, 149,
98 248, 201, 154, 171, 60, 13, 94, 111,
99 65, 112, 35, 18, 133, 180, 231, 214,
100 122, 75, 24, 41, 190, 143, 220, 237,
101 195, 242, 161, 144, 7, 54, 101, 84,
102 57, 8, 91, 106, 253, 204, 159, 174,
103 128, 177, 226, 211, 68, 117, 38, 23,
104 252, 205, 158, 175, 56, 9, 90, 107,
105 69, 116, 39, 22, 129, 176, 227, 210,
106 191, 142, 221, 236, 123, 74, 25, 40,
107 6, 55, 100, 85, 194, 243, 160, 145,
108 71, 118, 37, 20, 131, 178, 225, 208,
109 254, 207, 156, 173, 58, 11, 88, 105,
110 4, 53, 102, 87, 192, 241, 162, 147,
111 189, 140, 223, 238, 121, 72, 27, 42,
112 193, 240, 163, 146, 5, 52, 103, 86,
113 120, 73, 26, 43, 188, 141, 222, 239,
114 130, 179, 224, 209, 70, 119, 36, 21,
115 59, 10, 89, 104, 255, 206, 157, 172
116};
117
Jonathan Cameron251eb402009-04-13 14:39:45 -0700118/**
119 * struct sht15_data - device instance specific data
Vivien Didelot99a03782011-04-12 15:34:36 -0400120 * @pdata: platform data (gpio's etc).
121 * @read_work: bh of interrupt handler.
122 * @wait_queue: wait queue for getting values from device.
123 * @val_temp: last temperature value read from device.
124 * @val_humid: last humidity value read from device.
Vivien Didelotcc15c7e2011-04-12 15:34:38 -0400125 * @val_status: last status register value read from device.
Jerome Oufella82c74652011-04-12 15:34:39 -0400126 * @checksum_ok: last value read from the device passed CRC validation.
127 * @checksumming: flag used to enable the data validation with CRC.
Vivien Didelot99a03782011-04-12 15:34:36 -0400128 * @state: state identifying the action the driver is doing.
129 * @measurements_valid: are the current stored measures valid (start condition).
Vivien Didelotcc15c7e2011-04-12 15:34:38 -0400130 * @status_valid: is the current stored status valid (start condition).
Vivien Didelot99a03782011-04-12 15:34:36 -0400131 * @last_measurement: time of last measure.
Vivien Didelotcc15c7e2011-04-12 15:34:38 -0400132 * @last_status: time of last status reading.
Vivien Didelot99a03782011-04-12 15:34:36 -0400133 * @read_lock: mutex to ensure only one read in progress at a time.
134 * @dev: associate device structure.
135 * @hwmon_dev: device associated with hwmon subsystem.
136 * @reg: associated regulator (if specified).
137 * @nb: notifier block to handle notifications of voltage
138 * changes.
139 * @supply_uV: local copy of supply voltage used to allow use of
140 * regulator consumer if available.
141 * @supply_uV_valid: indicates that an updated value has not yet been
142 * obtained from the regulator and so any calculations
143 * based upon it will be invalid.
144 * @update_supply_work: work struct that is used to update the supply_uV.
145 * @interrupt_handled: flag used to indicate a handler has been scheduled.
Jonathan Cameron251eb402009-04-13 14:39:45 -0700146 */
147struct sht15_data {
148 struct sht15_platform_data *pdata;
149 struct work_struct read_work;
150 wait_queue_head_t wait_queue;
151 uint16_t val_temp;
152 uint16_t val_humid;
Vivien Didelotcc15c7e2011-04-12 15:34:38 -0400153 u8 val_status;
Jerome Oufella82c74652011-04-12 15:34:39 -0400154 bool checksum_ok;
155 bool checksumming;
Vivien Didelot99a03782011-04-12 15:34:36 -0400156 enum sht15_state state;
157 bool measurements_valid;
Vivien Didelotcc15c7e2011-04-12 15:34:38 -0400158 bool status_valid;
Vivien Didelot99a03782011-04-12 15:34:36 -0400159 unsigned long last_measurement;
Vivien Didelotcc15c7e2011-04-12 15:34:38 -0400160 unsigned long last_status;
Jonathan Cameron251eb402009-04-13 14:39:45 -0700161 struct mutex read_lock;
162 struct device *dev;
163 struct device *hwmon_dev;
164 struct regulator *reg;
165 struct notifier_block nb;
166 int supply_uV;
Vivien Didelot99a03782011-04-12 15:34:36 -0400167 bool supply_uV_valid;
Jonathan Cameron251eb402009-04-13 14:39:45 -0700168 struct work_struct update_supply_work;
169 atomic_t interrupt_handled;
170};
171
172/**
Jerome Oufella82c74652011-04-12 15:34:39 -0400173 * sht15_reverse() - reverse a byte
174 * @byte: byte to reverse.
175 */
176static u8 sht15_reverse(u8 byte)
177{
178 u8 i, c;
179
180 for (c = 0, i = 0; i < 8; i++)
181 c |= (!!(byte & (1 << i))) << (7 - i);
182 return c;
183}
184
185/**
186 * sht15_crc8() - compute crc8
187 * @data: sht15 specific data.
188 * @value: sht15 retrieved data.
189 *
190 * This implements section 2 of the CRC datasheet.
191 */
192static u8 sht15_crc8(struct sht15_data *data,
193 const u8 *value,
194 int len)
195{
196 u8 crc = sht15_reverse(data->val_status & 0x0F);
197
198 while (len--) {
199 crc = sht15_crc8_table[*value ^ crc];
200 value++;
201 }
202
203 return crc;
204}
205
206/**
Jonathan Cameron251eb402009-04-13 14:39:45 -0700207 * sht15_connection_reset() - reset the comms interface
208 * @data: sht15 specific data
209 *
210 * This implements section 3.4 of the data sheet
211 */
212static void sht15_connection_reset(struct sht15_data *data)
213{
214 int i;
Vivien Didelot99a03782011-04-12 15:34:36 -0400215
Jonathan Cameron251eb402009-04-13 14:39:45 -0700216 gpio_direction_output(data->pdata->gpio_data, 1);
217 ndelay(SHT15_TSCKL);
218 gpio_set_value(data->pdata->gpio_sck, 0);
219 ndelay(SHT15_TSCKL);
220 for (i = 0; i < 9; ++i) {
221 gpio_set_value(data->pdata->gpio_sck, 1);
222 ndelay(SHT15_TSCKH);
223 gpio_set_value(data->pdata->gpio_sck, 0);
224 ndelay(SHT15_TSCKL);
225 }
226}
Vivien Didelot99a03782011-04-12 15:34:36 -0400227
Jonathan Cameron251eb402009-04-13 14:39:45 -0700228/**
229 * sht15_send_bit() - send an individual bit to the device
230 * @data: device state data
231 * @val: value of bit to be sent
Vivien Didelot99a03782011-04-12 15:34:36 -0400232 */
Jonathan Cameron251eb402009-04-13 14:39:45 -0700233static inline void sht15_send_bit(struct sht15_data *data, int val)
234{
Jonathan Cameron251eb402009-04-13 14:39:45 -0700235 gpio_set_value(data->pdata->gpio_data, val);
236 ndelay(SHT15_TSU);
237 gpio_set_value(data->pdata->gpio_sck, 1);
238 ndelay(SHT15_TSCKH);
239 gpio_set_value(data->pdata->gpio_sck, 0);
240 ndelay(SHT15_TSCKL); /* clock low time */
241}
242
243/**
244 * sht15_transmission_start() - specific sequence for new transmission
Jonathan Cameron251eb402009-04-13 14:39:45 -0700245 * @data: device state data
Vivien Didelot99a03782011-04-12 15:34:36 -0400246 *
Jonathan Cameron251eb402009-04-13 14:39:45 -0700247 * Timings for this are not documented on the data sheet, so very
248 * conservative ones used in implementation. This implements
249 * figure 12 on the data sheet.
Vivien Didelot99a03782011-04-12 15:34:36 -0400250 */
Jonathan Cameron251eb402009-04-13 14:39:45 -0700251static void sht15_transmission_start(struct sht15_data *data)
252{
253 /* ensure data is high and output */
254 gpio_direction_output(data->pdata->gpio_data, 1);
255 ndelay(SHT15_TSU);
256 gpio_set_value(data->pdata->gpio_sck, 0);
257 ndelay(SHT15_TSCKL);
258 gpio_set_value(data->pdata->gpio_sck, 1);
259 ndelay(SHT15_TSCKH);
260 gpio_set_value(data->pdata->gpio_data, 0);
261 ndelay(SHT15_TSU);
262 gpio_set_value(data->pdata->gpio_sck, 0);
263 ndelay(SHT15_TSCKL);
264 gpio_set_value(data->pdata->gpio_sck, 1);
265 ndelay(SHT15_TSCKH);
266 gpio_set_value(data->pdata->gpio_data, 1);
267 ndelay(SHT15_TSU);
268 gpio_set_value(data->pdata->gpio_sck, 0);
269 ndelay(SHT15_TSCKL);
270}
Vivien Didelot99a03782011-04-12 15:34:36 -0400271
Jonathan Cameron251eb402009-04-13 14:39:45 -0700272/**
273 * sht15_send_byte() - send a single byte to the device
274 * @data: device state
275 * @byte: value to be sent
Vivien Didelot99a03782011-04-12 15:34:36 -0400276 */
Jonathan Cameron251eb402009-04-13 14:39:45 -0700277static void sht15_send_byte(struct sht15_data *data, u8 byte)
278{
279 int i;
Vivien Didelot99a03782011-04-12 15:34:36 -0400280
Jonathan Cameron251eb402009-04-13 14:39:45 -0700281 for (i = 0; i < 8; i++) {
282 sht15_send_bit(data, !!(byte & 0x80));
283 byte <<= 1;
284 }
285}
Vivien Didelot99a03782011-04-12 15:34:36 -0400286
Jonathan Cameron251eb402009-04-13 14:39:45 -0700287/**
288 * sht15_wait_for_response() - checks for ack from device
289 * @data: device state
Vivien Didelot99a03782011-04-12 15:34:36 -0400290 */
Jonathan Cameron251eb402009-04-13 14:39:45 -0700291static int sht15_wait_for_response(struct sht15_data *data)
292{
293 gpio_direction_input(data->pdata->gpio_data);
294 gpio_set_value(data->pdata->gpio_sck, 1);
295 ndelay(SHT15_TSCKH);
296 if (gpio_get_value(data->pdata->gpio_data)) {
297 gpio_set_value(data->pdata->gpio_sck, 0);
298 dev_err(data->dev, "Command not acknowledged\n");
299 sht15_connection_reset(data);
300 return -EIO;
301 }
302 gpio_set_value(data->pdata->gpio_sck, 0);
303 ndelay(SHT15_TSCKL);
304 return 0;
305}
306
307/**
308 * sht15_send_cmd() - Sends a command to the device.
309 * @data: device state
310 * @cmd: command byte to be sent
311 *
312 * On entry, sck is output low, data is output pull high
313 * and the interrupt disabled.
Vivien Didelot99a03782011-04-12 15:34:36 -0400314 */
Jonathan Cameron251eb402009-04-13 14:39:45 -0700315static int sht15_send_cmd(struct sht15_data *data, u8 cmd)
316{
317 int ret = 0;
Vivien Didelot99a03782011-04-12 15:34:36 -0400318
Jonathan Cameron251eb402009-04-13 14:39:45 -0700319 sht15_transmission_start(data);
320 sht15_send_byte(data, cmd);
321 ret = sht15_wait_for_response(data);
322 return ret;
323}
Vivien Didelot99a03782011-04-12 15:34:36 -0400324
Jonathan Cameron251eb402009-04-13 14:39:45 -0700325/**
Vivien Didelot181148a2011-04-12 15:34:37 -0400326 * sht15_soft_reset() - send a soft reset command
327 * @data: sht15 specific data.
328 *
329 * As described in section 3.2 of the datasheet.
330 */
331static int sht15_soft_reset(struct sht15_data *data)
332{
333 int ret;
334
335 ret = sht15_send_cmd(data, SHT15_SOFT_RESET);
336 if (ret)
337 return ret;
338 msleep(SHT15_TSRST);
Vivien Didelotcc15c7e2011-04-12 15:34:38 -0400339 /* device resets default hardware status register value */
340 data->val_status = 0;
Vivien Didelot181148a2011-04-12 15:34:37 -0400341
Vivien Didelotcc15c7e2011-04-12 15:34:38 -0400342 return ret;
343}
344
345/**
Jerome Oufella82c74652011-04-12 15:34:39 -0400346 * sht15_ack() - send a ack
347 * @data: sht15 specific data.
348 *
349 * Each byte of data is acknowledged by pulling the data line
350 * low for one clock pulse.
351 */
352static void sht15_ack(struct sht15_data *data)
353{
354 gpio_direction_output(data->pdata->gpio_data, 0);
355 ndelay(SHT15_TSU);
356 gpio_set_value(data->pdata->gpio_sck, 1);
357 ndelay(SHT15_TSU);
358 gpio_set_value(data->pdata->gpio_sck, 0);
359 ndelay(SHT15_TSU);
360 gpio_set_value(data->pdata->gpio_data, 1);
361
362 gpio_direction_input(data->pdata->gpio_data);
363}
364
365/**
Vivien Didelotcc15c7e2011-04-12 15:34:38 -0400366 * sht15_end_transmission() - notify device of end of transmission
367 * @data: device state.
368 *
369 * This is basically a NAK (single clock pulse, data high).
370 */
371static void sht15_end_transmission(struct sht15_data *data)
372{
373 gpio_direction_output(data->pdata->gpio_data, 1);
374 ndelay(SHT15_TSU);
375 gpio_set_value(data->pdata->gpio_sck, 1);
376 ndelay(SHT15_TSCKH);
377 gpio_set_value(data->pdata->gpio_sck, 0);
378 ndelay(SHT15_TSCKL);
379}
380
381/**
382 * sht15_read_byte() - Read a byte back from the device
383 * @data: device state.
384 */
385static u8 sht15_read_byte(struct sht15_data *data)
386{
387 int i;
388 u8 byte = 0;
389
390 for (i = 0; i < 8; ++i) {
391 byte <<= 1;
392 gpio_set_value(data->pdata->gpio_sck, 1);
393 ndelay(SHT15_TSCKH);
394 byte |= !!gpio_get_value(data->pdata->gpio_data);
395 gpio_set_value(data->pdata->gpio_sck, 0);
396 ndelay(SHT15_TSCKL);
397 }
398 return byte;
399}
400
401/**
402 * sht15_send_status() - write the status register byte
403 * @data: sht15 specific data.
404 * @status: the byte to set the status register with.
405 *
406 * As described in figure 14 and table 5 of the datasheet.
407 */
408static int sht15_send_status(struct sht15_data *data, u8 status)
409{
410 int ret;
411
412 ret = sht15_send_cmd(data, SHT15_WRITE_STATUS);
413 if (ret)
414 return ret;
415 gpio_direction_output(data->pdata->gpio_data, 1);
416 ndelay(SHT15_TSU);
417 sht15_send_byte(data, status);
418 ret = sht15_wait_for_response(data);
419 if (ret)
420 return ret;
421
422 data->val_status = status;
Vivien Didelot181148a2011-04-12 15:34:37 -0400423 return 0;
424}
425
426/**
Vivien Didelotcc15c7e2011-04-12 15:34:38 -0400427 * sht15_update_status() - get updated status register from device if too old
428 * @data: device instance specific data.
429 *
430 * As described in figure 15 and table 5 of the datasheet.
431 */
432static int sht15_update_status(struct sht15_data *data)
433{
434 int ret = 0;
435 u8 status;
Jerome Oufella82c74652011-04-12 15:34:39 -0400436 u8 previous_config;
437 u8 dev_checksum = 0;
438 u8 checksum_vals[2];
Vivien Didelotcc15c7e2011-04-12 15:34:38 -0400439 int timeout = HZ;
440
441 mutex_lock(&data->read_lock);
442 if (time_after(jiffies, data->last_status + timeout)
443 || !data->status_valid) {
444 ret = sht15_send_cmd(data, SHT15_READ_STATUS);
445 if (ret)
446 goto error_ret;
447 status = sht15_read_byte(data);
448
Jerome Oufella82c74652011-04-12 15:34:39 -0400449 if (data->checksumming) {
450 sht15_ack(data);
451 dev_checksum = sht15_reverse(sht15_read_byte(data));
452 checksum_vals[0] = SHT15_READ_STATUS;
453 checksum_vals[1] = status;
454 data->checksum_ok = (sht15_crc8(data, checksum_vals, 2)
455 == dev_checksum);
456 }
457
Vivien Didelotcc15c7e2011-04-12 15:34:38 -0400458 sht15_end_transmission(data);
459
Jerome Oufella82c74652011-04-12 15:34:39 -0400460 /*
461 * Perform checksum validation on the received data.
462 * Specification mentions that in case a checksum verification
463 * fails, a soft reset command must be sent to the device.
464 */
465 if (data->checksumming && !data->checksum_ok) {
466 previous_config = data->val_status & 0x07;
467 ret = sht15_soft_reset(data);
468 if (ret)
469 goto error_ret;
470 if (previous_config) {
471 ret = sht15_send_status(data, previous_config);
472 if (ret) {
473 dev_err(data->dev,
474 "CRC validation failed, unable "
475 "to restore device settings\n");
476 goto error_ret;
477 }
478 }
479 ret = -EAGAIN;
480 goto error_ret;
481 }
482
Vivien Didelotcc15c7e2011-04-12 15:34:38 -0400483 data->val_status = status;
484 data->status_valid = true;
485 data->last_status = jiffies;
486 }
487error_ret:
488 mutex_unlock(&data->read_lock);
489
490 return ret;
491}
492
493/**
Vivien Didelot99a03782011-04-12 15:34:36 -0400494 * sht15_measurement() - get a new value from device
Jonathan Cameron251eb402009-04-13 14:39:45 -0700495 * @data: device instance specific data
496 * @command: command sent to request value
497 * @timeout_msecs: timeout after which comms are assumed
498 * to have failed are reset.
Vivien Didelot99a03782011-04-12 15:34:36 -0400499 */
500static int sht15_measurement(struct sht15_data *data,
501 int command,
502 int timeout_msecs)
Jonathan Cameron251eb402009-04-13 14:39:45 -0700503{
504 int ret;
Jerome Oufella82c74652011-04-12 15:34:39 -0400505 u8 previous_config;
Vivien Didelot99a03782011-04-12 15:34:36 -0400506
Jonathan Cameron251eb402009-04-13 14:39:45 -0700507 ret = sht15_send_cmd(data, command);
508 if (ret)
509 return ret;
510
511 gpio_direction_input(data->pdata->gpio_data);
512 atomic_set(&data->interrupt_handled, 0);
513
514 enable_irq(gpio_to_irq(data->pdata->gpio_data));
515 if (gpio_get_value(data->pdata->gpio_data) == 0) {
516 disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300517 /* Only relevant if the interrupt hasn't occurred. */
Jonathan Cameron251eb402009-04-13 14:39:45 -0700518 if (!atomic_read(&data->interrupt_handled))
519 schedule_work(&data->read_work);
520 }
521 ret = wait_event_timeout(data->wait_queue,
Vivien Didelot99a03782011-04-12 15:34:36 -0400522 (data->state == SHT15_READING_NOTHING),
Jonathan Cameron251eb402009-04-13 14:39:45 -0700523 msecs_to_jiffies(timeout_msecs));
524 if (ret == 0) {/* timeout occurred */
Joe Perches24205e02009-07-11 13:42:37 +0200525 disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));
Jonathan Cameron251eb402009-04-13 14:39:45 -0700526 sht15_connection_reset(data);
527 return -ETIME;
528 }
Jerome Oufella82c74652011-04-12 15:34:39 -0400529
530 /*
531 * Perform checksum validation on the received data.
532 * Specification mentions that in case a checksum verification fails,
533 * a soft reset command must be sent to the device.
534 */
535 if (data->checksumming && !data->checksum_ok) {
536 previous_config = data->val_status & 0x07;
537 ret = sht15_soft_reset(data);
538 if (ret)
539 return ret;
540 if (previous_config) {
541 ret = sht15_send_status(data, previous_config);
542 if (ret) {
543 dev_err(data->dev,
544 "CRC validation failed, unable "
545 "to restore device settings\n");
546 return ret;
547 }
548 }
549 return -EAGAIN;
550 }
551
Jonathan Cameron251eb402009-04-13 14:39:45 -0700552 return 0;
553}
554
555/**
Vivien Didelot99a03782011-04-12 15:34:36 -0400556 * sht15_update_measurements() - get updated measures from device if too old
Jonathan Cameron251eb402009-04-13 14:39:45 -0700557 * @data: device state
Vivien Didelot99a03782011-04-12 15:34:36 -0400558 */
559static int sht15_update_measurements(struct sht15_data *data)
Jonathan Cameron251eb402009-04-13 14:39:45 -0700560{
561 int ret = 0;
562 int timeout = HZ;
563
564 mutex_lock(&data->read_lock);
Vivien Didelot99a03782011-04-12 15:34:36 -0400565 if (time_after(jiffies, data->last_measurement + timeout)
566 || !data->measurements_valid) {
567 data->state = SHT15_READING_HUMID;
568 ret = sht15_measurement(data, SHT15_MEASURE_RH, 160);
Jonathan Cameron251eb402009-04-13 14:39:45 -0700569 if (ret)
570 goto error_ret;
Vivien Didelot99a03782011-04-12 15:34:36 -0400571 data->state = SHT15_READING_TEMP;
572 ret = sht15_measurement(data, SHT15_MEASURE_TEMP, 400);
Jonathan Cameron251eb402009-04-13 14:39:45 -0700573 if (ret)
574 goto error_ret;
Vivien Didelot99a03782011-04-12 15:34:36 -0400575 data->measurements_valid = true;
576 data->last_measurement = jiffies;
Jonathan Cameron251eb402009-04-13 14:39:45 -0700577 }
578error_ret:
579 mutex_unlock(&data->read_lock);
580
581 return ret;
582}
583
584/**
585 * sht15_calc_temp() - convert the raw reading to a temperature
586 * @data: device state
587 *
588 * As per section 4.3 of the data sheet.
Vivien Didelot99a03782011-04-12 15:34:36 -0400589 */
Jonathan Cameron251eb402009-04-13 14:39:45 -0700590static inline int sht15_calc_temp(struct sht15_data *data)
591{
Jerome Oufella328a2c22010-04-14 16:14:07 +0200592 int d1 = temppoints[0].d1;
Vivien Didelotcc15c7e2011-04-12 15:34:38 -0400593 int d2 = (data->val_status & SHT15_STATUS_LOW_RESOLUTION) ? 40 : 10;
Jonathan Cameron251eb402009-04-13 14:39:45 -0700594 int i;
595
Jerome Oufella328a2c22010-04-14 16:14:07 +0200596 for (i = ARRAY_SIZE(temppoints) - 1; i > 0; i--)
Jonathan Cameron251eb402009-04-13 14:39:45 -0700597 /* Find pointer to interpolate */
598 if (data->supply_uV > temppoints[i - 1].vdd) {
Jerome Oufella328a2c22010-04-14 16:14:07 +0200599 d1 = (data->supply_uV - temppoints[i - 1].vdd)
Jonathan Cameron251eb402009-04-13 14:39:45 -0700600 * (temppoints[i].d1 - temppoints[i - 1].d1)
601 / (temppoints[i].vdd - temppoints[i - 1].vdd)
602 + temppoints[i - 1].d1;
603 break;
604 }
605
Vivien Didelotcc15c7e2011-04-12 15:34:38 -0400606 return data->val_temp * d2 + d1;
Jonathan Cameron251eb402009-04-13 14:39:45 -0700607}
608
609/**
610 * sht15_calc_humid() - using last temperature convert raw to humid
611 * @data: device state
612 *
613 * This is the temperature compensated version as per section 4.2 of
614 * the data sheet.
Vivien Didelot99a03782011-04-12 15:34:36 -0400615 *
616 * The sensor is assumed to be V3, which is compatible with V4.
617 * Humidity conversion coefficients are shown in table 7 of the datasheet.
618 */
Jonathan Cameron251eb402009-04-13 14:39:45 -0700619static inline int sht15_calc_humid(struct sht15_data *data)
620{
Vivien Didelot99a03782011-04-12 15:34:36 -0400621 int rh_linear; /* milli percent */
Jonathan Cameron251eb402009-04-13 14:39:45 -0700622 int temp = sht15_calc_temp(data);
Vivien Didelotcc15c7e2011-04-12 15:34:38 -0400623 int c2, c3;
624 int t2;
Jonathan Cameron251eb402009-04-13 14:39:45 -0700625 const int c1 = -4;
Vivien Didelotcc15c7e2011-04-12 15:34:38 -0400626
627 if (data->val_status & SHT15_STATUS_LOW_RESOLUTION) {
628 c2 = 648000; /* x 10 ^ -6 */
629 c3 = -7200; /* x 10 ^ -7 */
630 t2 = 1280;
631 } else {
632 c2 = 40500; /* x 10 ^ -6 */
633 c3 = -28; /* x 10 ^ -7 */
634 t2 = 80;
635 }
Jonathan Cameron251eb402009-04-13 14:39:45 -0700636
Vivien Didelot99a03782011-04-12 15:34:36 -0400637 rh_linear = c1 * 1000
638 + c2 * data->val_humid / 1000
Vivien Didelotccd32e72011-03-21 17:59:35 +0100639 + (data->val_humid * data->val_humid * c3) / 10000;
Vivien Didelotcc15c7e2011-04-12 15:34:38 -0400640 return (temp - 25000) * (10000 + t2 * data->val_humid)
Vivien Didelot99a03782011-04-12 15:34:36 -0400641 / 1000000 + rh_linear;
Jonathan Cameron251eb402009-04-13 14:39:45 -0700642}
643
Vivien Didelot99a03782011-04-12 15:34:36 -0400644/**
Vivien Didelotcc15c7e2011-04-12 15:34:38 -0400645 * sht15_show_status() - show status information in sysfs
646 * @dev: device.
647 * @attr: device attribute.
648 * @buf: sysfs buffer where information is written to.
649 *
650 * Will be called on read access to temp1_fault, humidity1_fault
651 * and heater_enable sysfs attributes.
652 * Returns number of bytes written into buffer, negative errno on error.
653 */
654static ssize_t sht15_show_status(struct device *dev,
655 struct device_attribute *attr,
656 char *buf)
657{
658 int ret;
659 struct sht15_data *data = dev_get_drvdata(dev);
660 u8 bit = to_sensor_dev_attr(attr)->index;
661
662 ret = sht15_update_status(data);
663
664 return ret ? ret : sprintf(buf, "%d\n", !!(data->val_status & bit));
665}
666
667/**
668 * sht15_store_heater() - change heater state via sysfs
669 * @dev: device.
670 * @attr: device attribute.
671 * @buf: sysfs buffer to read the new heater state from.
672 * @count: length of the data.
673 *
674 * Will be called on read access to heater_enable sysfs attribute.
675 * Returns number of bytes actually decoded, negative errno on error.
676 */
677static ssize_t sht15_store_heater(struct device *dev,
678 struct device_attribute *attr,
679 const char *buf, size_t count)
680{
681 int ret;
682 struct sht15_data *data = dev_get_drvdata(dev);
683 long value;
684 u8 status;
685
686 if (strict_strtol(buf, 10, &value))
687 return -EINVAL;
688
689 mutex_lock(&data->read_lock);
690 status = data->val_status & 0x07;
691 if (!!value)
692 status |= SHT15_STATUS_HEATER;
693 else
694 status &= ~SHT15_STATUS_HEATER;
695
696 ret = sht15_send_status(data, status);
697 mutex_unlock(&data->read_lock);
698
699 return ret ? ret : count;
700}
701
702/**
Vivien Didelot99a03782011-04-12 15:34:36 -0400703 * sht15_show_temp() - show temperature measurement value in sysfs
704 * @dev: device.
705 * @attr: device attribute.
706 * @buf: sysfs buffer where measurement values are written to.
707 *
708 * Will be called on read access to temp1_input sysfs attribute.
709 * Returns number of bytes written into buffer, negative errno on error.
710 */
Jonathan Cameron251eb402009-04-13 14:39:45 -0700711static ssize_t sht15_show_temp(struct device *dev,
712 struct device_attribute *attr,
713 char *buf)
714{
715 int ret;
716 struct sht15_data *data = dev_get_drvdata(dev);
717
718 /* Technically no need to read humidity as well */
Vivien Didelot99a03782011-04-12 15:34:36 -0400719 ret = sht15_update_measurements(data);
Jonathan Cameron251eb402009-04-13 14:39:45 -0700720
721 return ret ? ret : sprintf(buf, "%d\n",
722 sht15_calc_temp(data));
723}
724
Vivien Didelot99a03782011-04-12 15:34:36 -0400725/**
726 * sht15_show_humidity() - show humidity measurement value in sysfs
727 * @dev: device.
728 * @attr: device attribute.
729 * @buf: sysfs buffer where measurement values are written to.
730 *
731 * Will be called on read access to humidity1_input sysfs attribute.
732 * Returns number of bytes written into buffer, negative errno on error.
733 */
Jonathan Cameron251eb402009-04-13 14:39:45 -0700734static ssize_t sht15_show_humidity(struct device *dev,
735 struct device_attribute *attr,
736 char *buf)
737{
738 int ret;
739 struct sht15_data *data = dev_get_drvdata(dev);
740
Vivien Didelot99a03782011-04-12 15:34:36 -0400741 ret = sht15_update_measurements(data);
Jonathan Cameron251eb402009-04-13 14:39:45 -0700742
743 return ret ? ret : sprintf(buf, "%d\n", sht15_calc_humid(data));
Vivien Didelot99a03782011-04-12 15:34:36 -0400744}
745
Jonathan Cameron251eb402009-04-13 14:39:45 -0700746static ssize_t show_name(struct device *dev,
747 struct device_attribute *attr,
748 char *buf)
749{
750 struct platform_device *pdev = to_platform_device(dev);
751 return sprintf(buf, "%s\n", pdev->name);
752}
753
Vivien Didelot99a03782011-04-12 15:34:36 -0400754static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO,
755 sht15_show_temp, NULL, 0);
756static SENSOR_DEVICE_ATTR(humidity1_input, S_IRUGO,
757 sht15_show_humidity, NULL, 0);
Vivien Didelotcc15c7e2011-04-12 15:34:38 -0400758static SENSOR_DEVICE_ATTR(temp1_fault, S_IRUGO, sht15_show_status, NULL,
759 SHT15_STATUS_LOW_BATTERY);
760static SENSOR_DEVICE_ATTR(humidity1_fault, S_IRUGO, sht15_show_status, NULL,
761 SHT15_STATUS_LOW_BATTERY);
762static SENSOR_DEVICE_ATTR(heater_enable, S_IRUGO | S_IWUSR, sht15_show_status,
763 sht15_store_heater, SHT15_STATUS_HEATER);
Jonathan Cameron251eb402009-04-13 14:39:45 -0700764static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
765static struct attribute *sht15_attrs[] = {
766 &sensor_dev_attr_temp1_input.dev_attr.attr,
767 &sensor_dev_attr_humidity1_input.dev_attr.attr,
Vivien Didelotcc15c7e2011-04-12 15:34:38 -0400768 &sensor_dev_attr_temp1_fault.dev_attr.attr,
769 &sensor_dev_attr_humidity1_fault.dev_attr.attr,
770 &sensor_dev_attr_heater_enable.dev_attr.attr,
Jonathan Cameron251eb402009-04-13 14:39:45 -0700771 &dev_attr_name.attr,
772 NULL,
773};
774
775static const struct attribute_group sht15_attr_group = {
776 .attrs = sht15_attrs,
777};
778
779static irqreturn_t sht15_interrupt_fired(int irq, void *d)
780{
781 struct sht15_data *data = d;
Vivien Didelot99a03782011-04-12 15:34:36 -0400782
Jonathan Cameron251eb402009-04-13 14:39:45 -0700783 /* First disable the interrupt */
784 disable_irq_nosync(irq);
785 atomic_inc(&data->interrupt_handled);
786 /* Then schedule a reading work struct */
Vivien Didelot99a03782011-04-12 15:34:36 -0400787 if (data->state != SHT15_READING_NOTHING)
Jonathan Cameron251eb402009-04-13 14:39:45 -0700788 schedule_work(&data->read_work);
789 return IRQ_HANDLED;
790}
791
Jonathan Cameron251eb402009-04-13 14:39:45 -0700792static void sht15_bh_read_data(struct work_struct *work_s)
793{
Jonathan Cameron251eb402009-04-13 14:39:45 -0700794 uint16_t val = 0;
Jerome Oufella82c74652011-04-12 15:34:39 -0400795 u8 dev_checksum = 0;
796 u8 checksum_vals[3];
Jonathan Cameron251eb402009-04-13 14:39:45 -0700797 struct sht15_data *data
798 = container_of(work_s, struct sht15_data,
799 read_work);
Vivien Didelot99a03782011-04-12 15:34:36 -0400800
Jonathan Cameron251eb402009-04-13 14:39:45 -0700801 /* Firstly, verify the line is low */
802 if (gpio_get_value(data->pdata->gpio_data)) {
Vivien Didelot99a03782011-04-12 15:34:36 -0400803 /*
804 * If not, then start the interrupt again - care here as could
805 * have gone low in meantime so verify it hasn't!
806 */
Jonathan Cameron251eb402009-04-13 14:39:45 -0700807 atomic_set(&data->interrupt_handled, 0);
808 enable_irq(gpio_to_irq(data->pdata->gpio_data));
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300809 /* If still not occurred or another handler has been scheduled */
Jonathan Cameron251eb402009-04-13 14:39:45 -0700810 if (gpio_get_value(data->pdata->gpio_data)
811 || atomic_read(&data->interrupt_handled))
812 return;
813 }
Vivien Didelot99a03782011-04-12 15:34:36 -0400814
Jonathan Cameron251eb402009-04-13 14:39:45 -0700815 /* Read the data back from the device */
Vivien Didelotcc15c7e2011-04-12 15:34:38 -0400816 val = sht15_read_byte(data);
817 val <<= 8;
818 sht15_ack(data);
819 val |= sht15_read_byte(data);
Vivien Didelot99a03782011-04-12 15:34:36 -0400820
Jerome Oufella82c74652011-04-12 15:34:39 -0400821 if (data->checksumming) {
822 /*
823 * Ask the device for a checksum and read it back.
824 * Note: the device sends the checksum byte reversed.
825 */
826 sht15_ack(data);
827 dev_checksum = sht15_reverse(sht15_read_byte(data));
828 checksum_vals[0] = (data->state == SHT15_READING_TEMP) ?
829 SHT15_MEASURE_TEMP : SHT15_MEASURE_RH;
830 checksum_vals[1] = (u8) (val >> 8);
831 checksum_vals[2] = (u8) val;
832 data->checksum_ok
833 = (sht15_crc8(data, checksum_vals, 3) == dev_checksum);
834 }
835
Jonathan Cameron251eb402009-04-13 14:39:45 -0700836 /* Tell the device we are done */
837 sht15_end_transmission(data);
838
Vivien Didelot99a03782011-04-12 15:34:36 -0400839 switch (data->state) {
Jonathan Cameron251eb402009-04-13 14:39:45 -0700840 case SHT15_READING_TEMP:
841 data->val_temp = val;
842 break;
843 case SHT15_READING_HUMID:
844 data->val_humid = val;
845 break;
Vivien Didelot99a03782011-04-12 15:34:36 -0400846 default:
847 break;
Jonathan Cameron251eb402009-04-13 14:39:45 -0700848 }
849
Vivien Didelot99a03782011-04-12 15:34:36 -0400850 data->state = SHT15_READING_NOTHING;
Jonathan Cameron251eb402009-04-13 14:39:45 -0700851 wake_up(&data->wait_queue);
852}
853
854static void sht15_update_voltage(struct work_struct *work_s)
855{
856 struct sht15_data *data
857 = container_of(work_s, struct sht15_data,
858 update_supply_work);
859 data->supply_uV = regulator_get_voltage(data->reg);
860}
861
862/**
863 * sht15_invalidate_voltage() - mark supply voltage invalid when notified by reg
864 * @nb: associated notification structure
865 * @event: voltage regulator state change event code
866 * @ignored: function parameter - ignored here
867 *
868 * Note that as the notification code holds the regulator lock, we have
869 * to schedule an update of the supply voltage rather than getting it directly.
Vivien Didelot99a03782011-04-12 15:34:36 -0400870 */
Jonathan Cameron251eb402009-04-13 14:39:45 -0700871static int sht15_invalidate_voltage(struct notifier_block *nb,
Vivien Didelot99a03782011-04-12 15:34:36 -0400872 unsigned long event,
873 void *ignored)
Jonathan Cameron251eb402009-04-13 14:39:45 -0700874{
875 struct sht15_data *data = container_of(nb, struct sht15_data, nb);
876
877 if (event == REGULATOR_EVENT_VOLTAGE_CHANGE)
878 data->supply_uV_valid = false;
879 schedule_work(&data->update_supply_work);
880
881 return NOTIFY_OK;
882}
883
884static int __devinit sht15_probe(struct platform_device *pdev)
885{
886 int ret = 0;
887 struct sht15_data *data = kzalloc(sizeof(*data), GFP_KERNEL);
Vivien Didelotcc15c7e2011-04-12 15:34:38 -0400888 u8 status = 0;
Jonathan Cameron251eb402009-04-13 14:39:45 -0700889
890 if (!data) {
891 ret = -ENOMEM;
Vivien Didelot99a03782011-04-12 15:34:36 -0400892 dev_err(&pdev->dev, "kzalloc failed\n");
Jonathan Cameron251eb402009-04-13 14:39:45 -0700893 goto error_ret;
894 }
895
896 INIT_WORK(&data->read_work, sht15_bh_read_data);
897 INIT_WORK(&data->update_supply_work, sht15_update_voltage);
898 platform_set_drvdata(pdev, data);
899 mutex_init(&data->read_lock);
900 data->dev = &pdev->dev;
901 init_waitqueue_head(&data->wait_queue);
902
903 if (pdev->dev.platform_data == NULL) {
Vivien Didelot99a03782011-04-12 15:34:36 -0400904 dev_err(&pdev->dev, "no platform data supplied\n");
Jonathan Cameron251eb402009-04-13 14:39:45 -0700905 goto err_free_data;
906 }
907 data->pdata = pdev->dev.platform_data;
Vivien Didelot99a03782011-04-12 15:34:36 -0400908 data->supply_uV = data->pdata->supply_mv * 1000;
Jerome Oufella82c74652011-04-12 15:34:39 -0400909 if (data->pdata->checksum)
910 data->checksumming = true;
Vivien Didelotcc15c7e2011-04-12 15:34:38 -0400911 if (data->pdata->no_otp_reload)
912 status |= SHT15_STATUS_NO_OTP_RELOAD;
913 if (data->pdata->low_resolution)
914 status |= SHT15_STATUS_LOW_RESOLUTION;
Jonathan Cameron251eb402009-04-13 14:39:45 -0700915
Vivien Didelot99a03782011-04-12 15:34:36 -0400916 /*
917 * If a regulator is available,
918 * query what the supply voltage actually is!
919 */
Jonathan Cameron251eb402009-04-13 14:39:45 -0700920 data->reg = regulator_get(data->dev, "vcc");
921 if (!IS_ERR(data->reg)) {
Jean Delvarec7a78d22010-04-14 16:14:08 +0200922 int voltage;
923
924 voltage = regulator_get_voltage(data->reg);
925 if (voltage)
926 data->supply_uV = voltage;
927
Jonathan Cameron251eb402009-04-13 14:39:45 -0700928 regulator_enable(data->reg);
Vivien Didelot99a03782011-04-12 15:34:36 -0400929 /*
930 * Setup a notifier block to update this if another device
931 * causes the voltage to change
932 */
Jonathan Cameron251eb402009-04-13 14:39:45 -0700933 data->nb.notifier_call = &sht15_invalidate_voltage;
934 ret = regulator_register_notifier(data->reg, &data->nb);
Vivien Didelot181148a2011-04-12 15:34:37 -0400935 if (ret) {
936 dev_err(&pdev->dev,
937 "regulator notifier request failed\n");
938 regulator_disable(data->reg);
939 regulator_put(data->reg);
940 goto err_free_data;
941 }
Jonathan Cameron251eb402009-04-13 14:39:45 -0700942 }
Vivien Didelot99a03782011-04-12 15:34:36 -0400943
944 /* Try requesting the GPIOs */
Jonathan Cameron251eb402009-04-13 14:39:45 -0700945 ret = gpio_request(data->pdata->gpio_sck, "SHT15 sck");
946 if (ret) {
Vivien Didelot99a03782011-04-12 15:34:36 -0400947 dev_err(&pdev->dev, "gpio request failed\n");
Vivien Didelot181148a2011-04-12 15:34:37 -0400948 goto err_release_reg;
Jonathan Cameron251eb402009-04-13 14:39:45 -0700949 }
950 gpio_direction_output(data->pdata->gpio_sck, 0);
Vivien Didelot99a03782011-04-12 15:34:36 -0400951
Jonathan Cameron251eb402009-04-13 14:39:45 -0700952 ret = gpio_request(data->pdata->gpio_data, "SHT15 data");
953 if (ret) {
Vivien Didelot99a03782011-04-12 15:34:36 -0400954 dev_err(&pdev->dev, "gpio request failed\n");
Jonathan Cameron251eb402009-04-13 14:39:45 -0700955 goto err_release_gpio_sck;
956 }
Jonathan Cameron251eb402009-04-13 14:39:45 -0700957
958 ret = request_irq(gpio_to_irq(data->pdata->gpio_data),
959 sht15_interrupt_fired,
960 IRQF_TRIGGER_FALLING,
961 "sht15 data",
962 data);
963 if (ret) {
Vivien Didelot99a03782011-04-12 15:34:36 -0400964 dev_err(&pdev->dev, "failed to get irq for data line\n");
Jonathan Cameron251eb402009-04-13 14:39:45 -0700965 goto err_release_gpio_data;
966 }
967 disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));
968 sht15_connection_reset(data);
Vivien Didelot181148a2011-04-12 15:34:37 -0400969 ret = sht15_soft_reset(data);
970 if (ret)
971 goto err_release_irq;
972
Vivien Didelotcc15c7e2011-04-12 15:34:38 -0400973 /* write status with platform data options */
974 if (status) {
975 ret = sht15_send_status(data, status);
976 if (ret)
977 goto err_release_irq;
978 }
979
Vivien Didelot181148a2011-04-12 15:34:37 -0400980 ret = sysfs_create_group(&pdev->dev.kobj, &sht15_attr_group);
981 if (ret) {
982 dev_err(&pdev->dev, "sysfs create failed\n");
983 goto err_release_irq;
984 }
Jonathan Cameron251eb402009-04-13 14:39:45 -0700985
986 data->hwmon_dev = hwmon_device_register(data->dev);
987 if (IS_ERR(data->hwmon_dev)) {
988 ret = PTR_ERR(data->hwmon_dev);
Vivien Didelot181148a2011-04-12 15:34:37 -0400989 goto err_release_sysfs_group;
Jonathan Cameron251eb402009-04-13 14:39:45 -0700990 }
Vivien Didelot99a03782011-04-12 15:34:36 -0400991
Jonathan Cameron251eb402009-04-13 14:39:45 -0700992 return 0;
993
Vivien Didelot181148a2011-04-12 15:34:37 -0400994err_release_sysfs_group:
995 sysfs_remove_group(&pdev->dev.kobj, &sht15_attr_group);
Roel Kluin560a64a2009-09-21 17:04:48 -0700996err_release_irq:
997 free_irq(gpio_to_irq(data->pdata->gpio_data), data);
Jonathan Cameron251eb402009-04-13 14:39:45 -0700998err_release_gpio_data:
999 gpio_free(data->pdata->gpio_data);
1000err_release_gpio_sck:
1001 gpio_free(data->pdata->gpio_sck);
Vivien Didelot181148a2011-04-12 15:34:37 -04001002err_release_reg:
1003 if (!IS_ERR(data->reg)) {
1004 regulator_unregister_notifier(data->reg, &data->nb);
1005 regulator_disable(data->reg);
1006 regulator_put(data->reg);
1007 }
Jonathan Cameron251eb402009-04-13 14:39:45 -07001008err_free_data:
1009 kfree(data);
1010error_ret:
Jonathan Cameron251eb402009-04-13 14:39:45 -07001011 return ret;
1012}
1013
1014static int __devexit sht15_remove(struct platform_device *pdev)
1015{
1016 struct sht15_data *data = platform_get_drvdata(pdev);
1017
Vivien Didelot99a03782011-04-12 15:34:36 -04001018 /*
1019 * Make sure any reads from the device are done and
1020 * prevent new ones beginning
1021 */
Jonathan Cameron251eb402009-04-13 14:39:45 -07001022 mutex_lock(&data->read_lock);
Vivien Didelotcc15c7e2011-04-12 15:34:38 -04001023 if (sht15_soft_reset(data)) {
1024 mutex_unlock(&data->read_lock);
1025 return -EFAULT;
1026 }
Jonathan Cameron251eb402009-04-13 14:39:45 -07001027 hwmon_device_unregister(data->hwmon_dev);
1028 sysfs_remove_group(&pdev->dev.kobj, &sht15_attr_group);
1029 if (!IS_ERR(data->reg)) {
1030 regulator_unregister_notifier(data->reg, &data->nb);
1031 regulator_disable(data->reg);
1032 regulator_put(data->reg);
1033 }
1034
1035 free_irq(gpio_to_irq(data->pdata->gpio_data), data);
1036 gpio_free(data->pdata->gpio_data);
1037 gpio_free(data->pdata->gpio_sck);
1038 mutex_unlock(&data->read_lock);
1039 kfree(data);
Vivien Didelot99a03782011-04-12 15:34:36 -04001040
Jonathan Cameron251eb402009-04-13 14:39:45 -07001041 return 0;
1042}
1043
Rakib Mullickcb0f1a12009-10-09 20:35:17 +02001044/*
1045 * sht_drivers simultaneously refers to __devinit and __devexit function
1046 * which causes spurious section mismatch warning. So use __refdata to
1047 * get rid from this.
1048 */
1049static struct platform_driver __refdata sht_drivers[] = {
Jonathan Cameron251eb402009-04-13 14:39:45 -07001050 {
1051 .driver = {
1052 .name = "sht10",
1053 .owner = THIS_MODULE,
1054 },
1055 .probe = sht15_probe,
Jean Delvarecd659fd2009-06-15 18:39:45 +02001056 .remove = __devexit_p(sht15_remove),
Jonathan Cameron251eb402009-04-13 14:39:45 -07001057 }, {
1058 .driver = {
1059 .name = "sht11",
1060 .owner = THIS_MODULE,
1061 },
1062 .probe = sht15_probe,
Jean Delvarecd659fd2009-06-15 18:39:45 +02001063 .remove = __devexit_p(sht15_remove),
Jonathan Cameron251eb402009-04-13 14:39:45 -07001064 }, {
1065 .driver = {
1066 .name = "sht15",
1067 .owner = THIS_MODULE,
1068 },
1069 .probe = sht15_probe,
Jean Delvarecd659fd2009-06-15 18:39:45 +02001070 .remove = __devexit_p(sht15_remove),
Jonathan Cameron251eb402009-04-13 14:39:45 -07001071 }, {
1072 .driver = {
1073 .name = "sht71",
1074 .owner = THIS_MODULE,
1075 },
1076 .probe = sht15_probe,
Jean Delvarecd659fd2009-06-15 18:39:45 +02001077 .remove = __devexit_p(sht15_remove),
Jonathan Cameron251eb402009-04-13 14:39:45 -07001078 }, {
1079 .driver = {
1080 .name = "sht75",
1081 .owner = THIS_MODULE,
1082 },
1083 .probe = sht15_probe,
Jean Delvarecd659fd2009-06-15 18:39:45 +02001084 .remove = __devexit_p(sht15_remove),
Jonathan Cameron251eb402009-04-13 14:39:45 -07001085 },
1086};
1087
Jonathan Cameron251eb402009-04-13 14:39:45 -07001088static int __init sht15_init(void)
1089{
1090 int ret;
1091 int i;
1092
1093 for (i = 0; i < ARRAY_SIZE(sht_drivers); i++) {
1094 ret = platform_driver_register(&sht_drivers[i]);
1095 if (ret)
1096 goto error_unreg;
1097 }
1098
1099 return 0;
1100
1101error_unreg:
1102 while (--i >= 0)
1103 platform_driver_unregister(&sht_drivers[i]);
1104
1105 return ret;
1106}
1107module_init(sht15_init);
1108
1109static void __exit sht15_exit(void)
1110{
1111 int i;
1112 for (i = ARRAY_SIZE(sht_drivers) - 1; i >= 0; i--)
1113 platform_driver_unregister(&sht_drivers[i]);
1114}
1115module_exit(sht15_exit);
1116
1117MODULE_LICENSE("GPL");