blob: 222a2c6748e63636e6caf5685acee4b74357be7e [file] [log] [blame]
Max Filippov93e294a2013-03-04 23:48:14 +04001MMUv3 initialization sequence.
2
3The code in the initialize_mmu macro sets up MMUv3 memory mapping
4identically to MMUv2 fixed memory mapping. Depending on
5CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX symbol this code is
Max Filippova9f2fc62016-04-13 05:20:02 +03006located in addresses it was linked for (symbol undefined), or not
7(symbol defined), so it needs to be position-independent.
Max Filippov93e294a2013-03-04 23:48:14 +04008
9The code has the following assumptions:
10 This code fragment is run only on an MMU v3.
11 TLBs are in their reset state.
12 ITLBCFG and DTLBCFG are zero (reset state).
13 RASID is 0x04030201 (reset state).
14 PS.RING is zero (reset state).
15 LITBASE is zero (reset state, PC-relative literals); required to be PIC.
16
17TLB setup proceeds along the following steps.
18
19 Legend:
20 VA = virtual address (two upper nibbles of it);
21 PA = physical address (two upper nibbles of it);
22 pc = physical range that contains this code;
23
Max Filippova9f2fc62016-04-13 05:20:02 +030024After step 2, we jump to virtual address in the range 0x40000000..0x5fffffff
25or 0x00000000..0x1fffffff, depending on whether the kernel was loaded below
260x40000000 or above. That address corresponds to next instruction to execute
27in this code. After step 4, we jump to intended (linked) address of this code.
28The scheme below assumes that the kernel is loaded below 0x40000000.
Max Filippov93e294a2013-03-04 23:48:14 +040029
Max Filippova9f2fc62016-04-13 05:20:02 +030030 Step0 Step1 Step2 Step3 Step4 Step5
31 ===== ===== ===== ===== ===== =====
32 VA PA PA PA PA VA PA PA
33 ------ -- -- -- -- ------ -- --
34 E0..FF -> E0 -> E0 -> E0 F0..FF -> F0 -> F0
35 C0..DF -> C0 -> C0 -> C0 E0..EF -> F0 -> F0
36 A0..BF -> A0 -> A0 -> A0 D8..DF -> 00 -> 00
37 80..9F -> 80 -> 80 -> 80 D0..D7 -> 00 -> 00
38 60..7F -> 60 -> 60 -> 60
39 40..5F -> 40 -> pc -> pc 40..5F -> pc
40 20..3F -> 20 -> 20 -> 20
41 00..1F -> 00 -> 00 -> 00
Baruch Siach6cb97112013-12-29 11:03:30 +020042
Max Filippova9f2fc62016-04-13 05:20:02 +030043The default location of IO peripherals is above 0xf0000000. This may be changed
Baruch Siach6cb97112013-12-29 11:03:30 +020044using a "ranges" property in a device tree simple-bus node. See ePAPR 1.1, ยง6.5
45for details on the syntax and semantic of simple-bus nodes. The following
46limitations apply:
47
481. Only top level simple-bus nodes are considered
49
502. Only one (first) simple-bus node is considered
51
523. Empty "ranges" properties are not supported
53
544. Only the first triplet in the "ranges" property is considered
55
565. The parent-bus-address value is rounded down to the nearest 256MB boundary
57
586. The IO area covers the entire 256MB segment of parent-bus-address; the
59 "ranges" triplet length field is ignored
Max Filippovd39af902016-04-11 21:14:17 +030060
61
62MMUv3 address space layouts.
63============================
64
65Default MMUv2-compatible layout.
66
67 Symbol VADDR Size
68+------------------+
69| Userspace | 0x00000000 TASK_SIZE
70+------------------+ 0x40000000
71+------------------+
72| Page table | 0x80000000
73+------------------+ 0x80400000
74+------------------+
75| KMAP area | PKMAP_BASE PTRS_PER_PTE *
76| | DCACHE_N_COLORS *
77| | PAGE_SIZE
78| | (4MB * DCACHE_N_COLORS)
79+------------------+
80| Atomic KMAP area | FIXADDR_START KM_TYPE_NR *
81| | NR_CPUS *
82| | DCACHE_N_COLORS *
83| | PAGE_SIZE
84+------------------+ FIXADDR_TOP 0xbffff000
85+------------------+
86| VMALLOC area | VMALLOC_START 0xc0000000 128MB - 64KB
87+------------------+ VMALLOC_END
88| Cache aliasing | TLBTEMP_BASE_1 0xc7ff0000 DCACHE_WAY_SIZE
89| remap area 1 |
90+------------------+
91| Cache aliasing | TLBTEMP_BASE_2 DCACHE_WAY_SIZE
92| remap area 2 |
93+------------------+
94+------------------+
95| Cached KSEG | XCHAL_KSEG_CACHED_VADDR 0xd0000000 128MB
96+------------------+
97| Uncached KSEG | XCHAL_KSEG_BYPASS_VADDR 0xd8000000 128MB
98+------------------+
99| Cached KIO | XCHAL_KIO_CACHED_VADDR 0xe0000000 256MB
100+------------------+
101| Uncached KIO | XCHAL_KIO_BYPASS_VADDR 0xf0000000 256MB
102+------------------+
103
104
105256MB cached + 256MB uncached layout.
106
107 Symbol VADDR Size
108+------------------+
109| Userspace | 0x00000000 TASK_SIZE
110+------------------+ 0x40000000
111+------------------+
112| Page table | 0x80000000
113+------------------+ 0x80400000
114+------------------+
115| KMAP area | PKMAP_BASE PTRS_PER_PTE *
116| | DCACHE_N_COLORS *
117| | PAGE_SIZE
118| | (4MB * DCACHE_N_COLORS)
119+------------------+
120| Atomic KMAP area | FIXADDR_START KM_TYPE_NR *
121| | NR_CPUS *
122| | DCACHE_N_COLORS *
123| | PAGE_SIZE
124+------------------+ FIXADDR_TOP 0x9ffff000
125+------------------+
126| VMALLOC area | VMALLOC_START 0xa0000000 128MB - 64KB
127+------------------+ VMALLOC_END
128| Cache aliasing | TLBTEMP_BASE_1 0xa7ff0000 DCACHE_WAY_SIZE
129| remap area 1 |
130+------------------+
131| Cache aliasing | TLBTEMP_BASE_2 DCACHE_WAY_SIZE
132| remap area 2 |
133+------------------+
134+------------------+
135| Cached KSEG | XCHAL_KSEG_CACHED_VADDR 0xb0000000 256MB
136+------------------+
137| Uncached KSEG | XCHAL_KSEG_BYPASS_VADDR 0xc0000000 256MB
138+------------------+
139+------------------+
140| Cached KIO | XCHAL_KIO_CACHED_VADDR 0xe0000000 256MB
141+------------------+
142| Uncached KIO | XCHAL_KIO_BYPASS_VADDR 0xf0000000 256MB
143+------------------+
144
145
146512MB cached + 512MB uncached layout.
147
148 Symbol VADDR Size
149+------------------+
150| Userspace | 0x00000000 TASK_SIZE
151+------------------+ 0x40000000
152+------------------+
153| Page table | 0x80000000
154+------------------+ 0x80400000
155+------------------+
156| KMAP area | PKMAP_BASE PTRS_PER_PTE *
157| | DCACHE_N_COLORS *
158| | PAGE_SIZE
159| | (4MB * DCACHE_N_COLORS)
160+------------------+
161| Atomic KMAP area | FIXADDR_START KM_TYPE_NR *
162| | NR_CPUS *
163| | DCACHE_N_COLORS *
164| | PAGE_SIZE
165+------------------+ FIXADDR_TOP 0x8ffff000
166+------------------+
167| VMALLOC area | VMALLOC_START 0x90000000 128MB - 64KB
168+------------------+ VMALLOC_END
169| Cache aliasing | TLBTEMP_BASE_1 0x97ff0000 DCACHE_WAY_SIZE
170| remap area 1 |
171+------------------+
172| Cache aliasing | TLBTEMP_BASE_2 DCACHE_WAY_SIZE
173| remap area 2 |
174+------------------+
175+------------------+
176| Cached KSEG | XCHAL_KSEG_CACHED_VADDR 0xa0000000 512MB
177+------------------+
178| Uncached KSEG | XCHAL_KSEG_BYPASS_VADDR 0xc0000000 512MB
179+------------------+
180| Cached KIO | XCHAL_KIO_CACHED_VADDR 0xe0000000 256MB
181+------------------+
182| Uncached KIO | XCHAL_KIO_BYPASS_VADDR 0xf0000000 256MB
183+------------------+