blob: d28690f6e26219c3c00185db8d6b6af9dcba48ae [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001
Jan Engelhardt0f217122007-04-30 21:37:55 +10002menuconfig MACINTOSH_DRIVERS
3 bool "Macintosh device drivers"
Soeren Sonnenburg45941d02007-02-08 14:20:38 -08004 depends on PPC || MAC || X86
Olaf Heringe2f1f192007-06-23 02:29:24 +02005 default y if (PPC_PMAC || MAC)
Jan Engelhardt06bfb7e2007-08-18 12:56:21 +02006 ---help---
7 Say Y here to get to see options for devices used with Macintosh
8 computers. This option alone does not add any kernel code.
9
10 If you say N, all options in this submenu will be skipped and disabled.
Jan Engelhardt0f217122007-04-30 21:37:55 +100011
12if MACINTOSH_DRIVERS
Linus Torvalds1da177e2005-04-16 15:20:36 -070013
14config ADB
15 bool "Apple Desktop Bus (ADB) support"
Olaf Hering64c74de2005-07-27 11:44:16 -070016 depends on MAC || (PPC_PMAC && PPC32)
Linus Torvalds1da177e2005-04-16 15:20:36 -070017 help
18 Apple Desktop Bus (ADB) support is for support of devices which
19 are connected to an ADB port. ADB devices tend to have 4 pins.
20 If you have an Apple Macintosh prior to the iMac, an iBook or
21 PowerBook, or a "Blue and White G3", you probably want to say Y
22 here. Otherwise say N.
23
24config ADB_MACII
25 bool "Include Mac II ADB driver"
26 depends on ADB && MAC
27 help
28 Say Y here if want your kernel to support Macintosh systems that use
29 the Mac II style ADB. This includes the II, IIx, IIcx, SE/30, IIci,
30 Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and
31 Centris 650.
32
33config ADB_MACIISI
34 bool "Include Mac IIsi ADB driver"
Geert Uytterhoeven6cf30b32013-05-24 14:10:51 +020035 depends on ADB && MAC && BROKEN
Linus Torvalds1da177e2005-04-16 15:20:36 -070036 help
37 Say Y here if want your kernel to support Macintosh systems that use
38 the Mac IIsi style ADB. This includes the IIsi, IIvi, IIvx, Classic
39 II, LC, LC II, LC III, Performa 460, and the Performa 600.
40
41config ADB_IOP
42 bool "Include IOP (IIfx/Quadra 9x0) ADB driver"
43 depends on ADB && MAC
44 help
45 The I/O Processor (IOP) is an Apple custom IC designed to provide
46 intelligent support for I/O controllers. It is described at
47 <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct
48 support for it, say 'Y' here.
49
50config ADB_PMU68K
51 bool "Include PMU (Powerbook) ADB driver"
52 depends on ADB && MAC
53 help
54 Say Y here if want your kernel to support the m68k based Powerbooks.
55 This includes the PowerBook 140, PowerBook 145, PowerBook 150,
56 PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170,
57 PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520,
58 PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250,
59 PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c.
60
61# we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU
62config ADB_CUDA
63 bool "Support for CUDA based Macs and PowerMacs"
64 depends on (ADB || PPC_PMAC) && !PPC_PMAC64
65 help
66 This provides support for CUDA based Macintosh and Power Macintosh
67 systems. This includes many m68k based Macs (Color Classic, Mac TV,
68 Performa 475, Performa 520, Performa 550, Performa 575,
69 Performa 588, Quadra 605, Quadra 630, Quadra/Centris 660AV, and
70 Quadra 840AV), most OldWorld PowerMacs, the first generation iMacs,
71 the Blue&White G3 and the "Yikes" G4 (PCI Graphics). All later
72 models should use CONFIG_ADB_PMU instead. It is safe to say Y here
73 even if your machine doesn't have a CUDA.
74
75 If unsure say Y.
76
77config ADB_PMU
78 bool "Support for PMU based PowerMacs"
79 depends on PPC_PMAC
80 help
81 On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the
82 PMU is an embedded microprocessor whose primary function is to
83 control system power, and battery charging on the portable models.
84 The PMU also controls the ADB (Apple Desktop Bus) which connects to
85 the keyboard and mouse on some machines, as well as the non-volatile
86 RAM and the RTC (real time clock) chip. Say Y to enable support for
87 this device; you should do so if your machine is one of those
88 mentioned above.
89
Johannes Berg70c39672006-06-21 12:11:16 +020090config ADB_PMU_LED
91 bool "Support for the Power/iBook front LED"
92 depends on ADB_PMU
Paul Mackerras649e8572006-06-28 13:57:16 +100093 select NEW_LEDS
Johannes Berg70c39672006-06-21 12:11:16 +020094 select LEDS_CLASS
95 help
96 Support the front LED on Power/iBooks as a generic LED that can
97 be triggered by any of the supported triggers. To get the
98 behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this
Stephan Linz83e2c702016-06-10 07:59:58 +020099 and the disk LED trigger and configure appropriately through sysfs.
Johannes Berg70c39672006-06-21 12:11:16 +0200100
Stephan Linz83e2c702016-06-10 07:59:58 +0200101config ADB_PMU_LED_DISK
102 bool "Use front LED as DISK LED by default"
Johannes Bergd1a8df92006-07-03 14:28:14 +0200103 depends on ADB_PMU_LED
Johannes Berg0bae35e2010-12-02 14:31:14 -0800104 depends on LEDS_CLASS
Christian Kujaude00b302013-10-29 21:25:43 -0700105 depends on IDE_GD_ATA
Johannes Bergd1a8df92006-07-03 14:28:14 +0200106 select LEDS_TRIGGERS
Stephan Linz83e2c702016-06-10 07:59:58 +0200107 select LEDS_TRIGGER_DISK
Johannes Bergd1a8df92006-07-03 14:28:14 +0200108 help
Stephan Linz83e2c702016-06-10 07:59:58 +0200109 This option makes the front LED default to the disk trigger
110 so that it blinks on disk activity.
Johannes Bergd1a8df92006-07-03 14:28:14 +0200111
Linus Torvalds1da177e2005-04-16 15:20:36 -0700112config PMAC_SMU
113 bool "Support for SMU based PowerMacs"
114 depends on PPC_PMAC64
115 help
116 This option adds support for the newer G5 iMacs and PowerMacs based
117 on the "SMU" system control chip which replaces the old PMU.
118 If you don't know, say Y.
119
Linus Torvalds1da177e2005-04-16 15:20:36 -0700120config PMAC_APM_EMU
121 tristate "APM emulation"
Johannes Bergb3028872007-03-20 05:18:02 +1100122 select APM_EMULATION
Johannes Berge358ae42007-06-02 19:13:44 +1000123 depends on ADB_PMU && PM && PPC32
Benjamin Herrenschmidt8c870932005-06-27 14:36:34 -0700124
125config PMAC_MEDIABAY
126 bool "Support PowerBook hotswap media bay"
Alexander Beregalovbcd71fe2009-04-17 00:15:13 +0000127 depends on PPC_PMAC && PPC32 && BLOCK
Benjamin Herrenschmidt8c870932005-06-27 14:36:34 -0700128 help
129 This option adds support for older PowerBook's hotswap media bay
130 that can contains batteries, floppy drives, or IDE devices. PCI
131 devices are not fully supported in the bay as I never had one to
132 try with
Linus Torvalds1da177e2005-04-16 15:20:36 -0700133
Linus Torvalds1da177e2005-04-16 15:20:36 -0700134config PMAC_BACKLIGHT
135 bool "Backlight control for LCD screens"
Michael Hanselmanne01af032006-07-10 04:44:45 -0700136 depends on ADB_PMU && FB = y && (BROKEN || !PPC64)
137 select FB_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700138 help
Michael Hanselmann5474c122006-06-25 05:47:08 -0700139 Say Y here to enable Macintosh specific extensions of the generic
140 backlight code. With this enabled, the brightness keys on older
141 PowerBooks will be enabled so you can change the screen brightness.
Frederik Schwarzer0211a9c2008-12-29 22:14:56 +0100142 Newer models should use a userspace daemon like pbbuttonsd.
Michael Hanselmann5474c122006-06-25 05:47:08 -0700143
144config PMAC_BACKLIGHT_LEGACY
145 bool "Provide legacy ioctl's on /dev/pmu for the backlight"
146 depends on PMAC_BACKLIGHT && (BROKEN || !PPC64)
147 help
148 Say Y if you want to enable legacy ioctl's on /dev/pmu. This is for
149 programs which use this old interface. New and updated programs
150 should use the backlight classes in sysfs.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700151
Linus Torvalds1da177e2005-04-16 15:20:36 -0700152config ADB_MACIO
153 bool "Include MacIO (CHRP) ADB driver"
154 depends on ADB && PPC_CHRP && !PPC_PMAC64
155 help
156 Say Y here to include direct support for the ADB controller in the
157 Hydra chip used on PowerPC Macintoshes of the CHRP type. (The Hydra
158 also includes a MESH II SCSI controller, DBDMA controller, VIA chip,
159 OpenPIC controller and two RS422/Geoports.)
160
161config INPUT_ADBHID
162 bool "Support for ADB input devices (keyboard, mice, ...)"
163 depends on ADB && INPUT=y
164 help
165 Say Y here if you want to have ADB (Apple Desktop Bus) HID devices
166 such as keyboards, mice, joysticks, trackpads or graphic tablets
167 handled by the input layer. If you say Y here, make sure to say Y to
Aaro Koskinenf27b86d2015-10-01 22:41:40 +0300168 the corresponding drivers "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and
169 "Event interface support" (CONFIG_INPUT_EVDEV) as well.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700170
171 If unsure, say Y.
172
173config MAC_EMUMOUSEBTN
Dmitry Torokhov429722e2010-01-30 01:44:20 -0800174 tristate "Support for mouse button 2+3 emulation"
175 depends on SYSCTL && INPUT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700176 help
177 This provides generic support for emulating the 2nd and 3rd mouse
178 button with keypresses. If you say Y here, the emulation is still
179 disabled by default. The emulation is controlled by these sysctl
180 entries:
181 /proc/sys/dev/mac_hid/mouse_button_emulation
182 /proc/sys/dev/mac_hid/mouse_button2_keycode
183 /proc/sys/dev/mac_hid/mouse_button3_keycode
184
185 If you have an Apple machine with a 1-button mouse, say Y here.
186
Dmitry Torokhov429722e2010-01-30 01:44:20 -0800187 To compile this driver as a module, choose M here: the
188 module will be called mac_hid.
189
Linus Torvalds1da177e2005-04-16 15:20:36 -0700190config THERM_WINDTUNNEL
191 tristate "Support for thermal management on Windtunnel G4s"
Benjamin Herrenschmidta28d3af2006-01-07 11:35:26 +1100192 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
Linus Torvalds1da177e2005-04-16 15:20:36 -0700193 help
194 This driver provides some thermostat and fan control for the desktop
195 G4 "Windtunnel"
196
197config THERM_ADT746X
198 tristate "Support for thermal mgmnt on laptops with ADT 746x chipset"
Benjamin Herrenschmidta28d3af2006-01-07 11:35:26 +1100199 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
Linus Torvalds1da177e2005-04-16 15:20:36 -0700200 help
201 This driver provides some thermostat and fan control for the
Matt LaPlante09509602006-10-03 22:31:37 +0200202 iBook G4, and the ATI based aluminium PowerBooks, allowing slightly
Linus Torvalds1da177e2005-04-16 15:20:36 -0700203 better fan behaviour by default, and some manual control.
204
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100205config WINDFARM
206 tristate "New PowerMac thermal control infrastructure"
Al Viro6f36d172006-06-23 02:05:03 -0700207 depends on PPC
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100208
209config WINDFARM_PM81
210 tristate "Support for thermal management on iMac G5"
211 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
Benjamin Herrenschmidta28d3af2006-01-07 11:35:26 +1100212 select I2C_POWERMAC
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100213 help
214 This driver provides thermal control for the iMacG5
215
Benjamin Herrenschmidt6cd32092012-04-29 15:42:27 +0000216config WINDFARM_PM72
217 tristate "Support for thermal management on PowerMac G5 (AGP)"
218 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU
219 select I2C_POWERMAC
220 help
221 This driver provides thermal control for the PowerMac G5
222 "AGP" variants (PowerMac 7,2 and 7,3)
223
224config WINDFARM_RM31
225 tristate "Support for thermal management on Xserve G5"
226 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU
227 select I2C_POWERMAC
228 help
229 This driver provides thermal control for the Xserve G5
230 (RackMac3,1)
231
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100232config WINDFARM_PM91
233 tristate "Support for thermal management on PowerMac9,1"
234 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
Benjamin Herrenschmidta28d3af2006-01-07 11:35:26 +1100235 select I2C_POWERMAC
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100236 help
237 This driver provides thermal control for the PowerMac9,1
238 which is the recent (SMU based) single CPU desktop G5
239
Benjamin Herrenschmidtac171c42006-02-08 16:42:51 +1100240config WINDFARM_PM112
241 tristate "Support for thermal management on PowerMac11,2"
242 depends on WINDFARM && I2C && PMAC_SMU
Linus Torvaldse5ea0a92006-02-08 07:51:17 -0800243 select I2C_POWERMAC
Benjamin Herrenschmidtac171c42006-02-08 16:42:51 +1100244 help
245 This driver provides thermal control for the PowerMac11,2
246 which are the recent dual and quad G5 machines using the
247 970MP dual-core processor.
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100248
Étienne Bersac80ff9742008-04-29 15:39:55 +1000249config WINDFARM_PM121
250 tristate "Support for thermal management on PowerMac12,1"
251 depends on WINDFARM && I2C && PMAC_SMU
252 select I2C_POWERMAC
253 help
254 This driver provides thermal control for the PowerMac12,1
255 which is the iMac G5 (iSight).
256
Linus Torvalds1da177e2005-04-16 15:20:36 -0700257config ANSLCD
258 tristate "Support for ANS LCD display"
259 depends on ADB_CUDA && PPC_PMAC
260
Benjamin Herrenschmidt3e00a5a2006-11-16 14:03:33 +1100261config PMAC_RACKMETER
262 tristate "Support for Apple XServe front panel LEDs"
263 depends on PPC_PMAC
264 help
David Sterba3dde6ad2007-05-09 07:12:20 +0200265 This driver provides some support to control the front panel
Benjamin Herrenschmidt3e00a5a2006-11-16 14:03:33 +1100266 blue LEDs "vu-meter" of the XServer macs.
267
Jean Delvarebd5f47e2010-10-28 20:31:50 +0200268config SENSORS_AMS
269 tristate "Apple Motion Sensor driver"
Kees Cook80ec2132013-01-16 18:53:42 -0800270 depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C)
Jean Delvarebd5f47e2010-10-28 20:31:50 +0200271 select INPUT_POLLDEV
272 help
273 Support for the motion sensor included in PowerBooks. Includes
274 implementations for PMU and I2C.
275
276 This driver can also be built as a module. If so, the module
277 will be called ams.
278
279config SENSORS_AMS_PMU
280 bool "PMU variant"
281 depends on SENSORS_AMS && ADB_PMU
282 default y
283 help
284 PMU variant of motion sensor, found in late 2005 PowerBooks.
285
286config SENSORS_AMS_I2C
287 bool "I2C variant"
288 depends on SENSORS_AMS && I2C
289 default y
290 help
291 I2C variant of motion sensor, found in early 2005 PowerBooks and
292 iBooks.
293
Jan Engelhardt0f217122007-04-30 21:37:55 +1000294endif # MACINTOSH_DRIVERS