blob: daa015af16a092a8d4b7fd1df73f2bbe282251d9 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001--------------------------------------------------------------------------------
2+ ABSTRACT
3--------------------------------------------------------------------------------
4
David S. Miller889b8f92010-02-05 16:29:48 -08005This file documents the mmap() facility available with the PACKET
Daniel Borkmannd1ee40f2012-11-08 02:37:01 +00006socket interface on 2.4/2.6/3.x kernels. This type of sockets is used for
7i) capture network traffic with utilities like tcpdump, ii) transmit network
8traffic, or any other that needs raw access to network interface.
Linus Torvalds1da177e2005-04-16 15:20:36 -07009
Johann Baudy69e3c752009-05-18 22:11:22 -070010You can find the latest version of this document at:
Justin P. Mattock0ea6e612010-07-23 20:51:24 -070011 http://wiki.ipxwarzone.com/index.php5?title=Linux_packet_mmap
Linus Torvalds1da177e2005-04-16 15:20:36 -070012
Johann Baudy69e3c752009-05-18 22:11:22 -070013Howto can be found at:
14 http://wiki.gnu-log.net (packet_mmap)
Linus Torvalds1da177e2005-04-16 15:20:36 -070015
Johann Baudy69e3c752009-05-18 22:11:22 -070016Please send your comments to
John Anthony Kazos Jrbe2a6082007-05-09 08:50:42 +020017 Ulisses Alonso CamarĂ³ <uaca@i.hate.spam.alumni.uv.es>
Johann Baudy69e3c752009-05-18 22:11:22 -070018 Johann Baudy <johann.baudy@gnu-log.net>
Linus Torvalds1da177e2005-04-16 15:20:36 -070019
20-------------------------------------------------------------------------------
21+ Why use PACKET_MMAP
22--------------------------------------------------------------------------------
23
Daniel Borkmannd1ee40f2012-11-08 02:37:01 +000024In Linux 2.4/2.6/3.x if PACKET_MMAP is not enabled, the capture process is very
25inefficient. It uses very limited buffers and requires one system call to
26capture each packet, it requires two if you want to get packet's timestamp
27(like libpcap always does).
Linus Torvalds1da177e2005-04-16 15:20:36 -070028
29In the other hand PACKET_MMAP is very efficient. PACKET_MMAP provides a size
Johann Baudy69e3c752009-05-18 22:11:22 -070030configurable circular buffer mapped in user space that can be used to either
31send or receive packets. This way reading packets just needs to wait for them,
32most of the time there is no need to issue a single system call. Concerning
33transmission, multiple packets can be sent through one system call to get the
Daniel Borkmannd1ee40f2012-11-08 02:37:01 +000034highest bandwidth. By using a shared buffer between the kernel and the user
35also has the benefit of minimizing packet copies.
Linus Torvalds1da177e2005-04-16 15:20:36 -070036
Johann Baudy69e3c752009-05-18 22:11:22 -070037It's fine to use PACKET_MMAP to improve the performance of the capture and
38transmission process, but it isn't everything. At least, if you are capturing
39at high speeds (this is relative to the cpu speed), you should check if the
40device driver of your network interface card supports some sort of interrupt
41load mitigation or (even better) if it supports NAPI, also make sure it is
42enabled. For transmission, check the MTU (Maximum Transmission Unit) used and
Daniel Borkmannd1ee40f2012-11-08 02:37:01 +000043supported by devices of your network. CPU IRQ pinning of your network interface
44card can also be an advantage.
Linus Torvalds1da177e2005-04-16 15:20:36 -070045
46--------------------------------------------------------------------------------
David S. Miller889b8f92010-02-05 16:29:48 -080047+ How to use mmap() to improve capture process
Linus Torvalds1da177e2005-04-16 15:20:36 -070048--------------------------------------------------------------------------------
49
Uwe Zeisbergerc30fe7f2006-03-24 18:23:14 +010050From the user standpoint, you should use the higher level libpcap library, which
Linus Torvalds1da177e2005-04-16 15:20:36 -070051is a de facto standard, portable across nearly all operating systems
52including Win32.
53
54Said that, at time of this writing, official libpcap 0.8.1 is out and doesn't include
55support for PACKET_MMAP, and also probably the libpcap included in your distribution.
56
57I'm aware of two implementations of PACKET_MMAP in libpcap:
58
Justin P. Mattock0ea6e612010-07-23 20:51:24 -070059 http://wiki.ipxwarzone.com/ (by Simon Patarin, based on libpcap 0.6.2)
Linus Torvalds1da177e2005-04-16 15:20:36 -070060 http://public.lanl.gov/cpw/ (by Phil Wood, based on lastest libpcap)
61
62The rest of this document is intended for people who want to understand
63the low level details or want to improve libpcap by including PACKET_MMAP
64support.
65
66--------------------------------------------------------------------------------
David S. Miller889b8f92010-02-05 16:29:48 -080067+ How to use mmap() directly to improve capture process
Linus Torvalds1da177e2005-04-16 15:20:36 -070068--------------------------------------------------------------------------------
69
70From the system calls stand point, the use of PACKET_MMAP involves
71the following process:
72
73
74[setup] socket() -------> creation of the capture socket
75 setsockopt() ---> allocation of the circular buffer (ring)
Johann Baudy69e3c752009-05-18 22:11:22 -070076 option: PACKET_RX_RING
Matt LaPlante6c28f2c2006-10-03 22:46:31 +020077 mmap() ---------> mapping of the allocated buffer to the
Linus Torvalds1da177e2005-04-16 15:20:36 -070078 user process
79
80[capture] poll() ---------> to wait for incoming packets
81
82[shutdown] close() --------> destruction of the capture socket and
83 deallocation of all associated
84 resources.
85
86
87socket creation and destruction is straight forward, and is done
88the same way with or without PACKET_MMAP:
89
Daniel Borkmannd1ee40f2012-11-08 02:37:01 +000090 int fd = socket(PF_PACKET, mode, htons(ETH_P_ALL));
Linus Torvalds1da177e2005-04-16 15:20:36 -070091
92where mode is SOCK_RAW for the raw interface were link level
93information can be captured or SOCK_DGRAM for the cooked
94interface where link level information capture is not
95supported and a link level pseudo-header is provided
96by the kernel.
97
98The destruction of the socket and all associated resources
99is done by a simple call to close(fd).
100
Norbert van Bolhuis7e11daa2014-01-10 10:22:37 +0100101Similarly as without PACKET_MMAP, it is possible to use one socket
102for capture and transmission. This can be done by mapping the
103allocated RX and TX buffer ring with a single mmap() call.
104See "Mapping and use of the circular buffer (ring)".
105
Francis Galieguea33f3222010-04-23 00:08:02 +0200106Next I will describe PACKET_MMAP settings and its constraints,
Matt LaPlante6c28f2c2006-10-03 22:46:31 +0200107also the mapping of the circular buffer in the user process and
Linus Torvalds1da177e2005-04-16 15:20:36 -0700108the use of this buffer.
109
110--------------------------------------------------------------------------------
David S. Miller889b8f92010-02-05 16:29:48 -0800111+ How to use mmap() directly to improve transmission process
Johann Baudy69e3c752009-05-18 22:11:22 -0700112--------------------------------------------------------------------------------
113Transmission process is similar to capture as shown below.
114
115[setup] socket() -------> creation of the transmission socket
116 setsockopt() ---> allocation of the circular buffer (ring)
117 option: PACKET_TX_RING
118 bind() ---------> bind transmission socket with a network interface
119 mmap() ---------> mapping of the allocated buffer to the
120 user process
121
122[transmission] poll() ---------> wait for free packets (optional)
123 send() ---------> send all packets that are set as ready in
124 the ring
125 The flag MSG_DONTWAIT can be used to return
126 before end of transfer.
127
128[shutdown] close() --------> destruction of the transmission socket and
129 deallocation of all associated resources.
130
Daniel Borkmann66e56cd2013-12-06 11:36:15 +0100131Socket creation and destruction is also straight forward, and is done
132the same way as in capturing described in the previous paragraph:
133
134 int fd = socket(PF_PACKET, mode, 0);
135
136The protocol can optionally be 0 in case we only want to transmit
137via this socket, which avoids an expensive call to packet_rcv().
138In this case, you also need to bind(2) the TX_RING with sll_protocol = 0
139set. Otherwise, htons(ETH_P_ALL) or any other protocol, for example.
140
Johann Baudy69e3c752009-05-18 22:11:22 -0700141Binding the socket to your network interface is mandatory (with zero copy) to
142know the header size of frames used in the circular buffer.
143
144As capture, each frame contains two parts:
145
146 --------------------
147| struct tpacket_hdr | Header. It contains the status of
148| | of this frame
149|--------------------|
150| data buffer |
151. . Data that will be sent over the network interface.
152. .
153 --------------------
154
155 bind() associates the socket to your network interface thanks to
156 sll_ifindex parameter of struct sockaddr_ll.
157
158 Initialization example:
159
160 struct sockaddr_ll my_addr;
161 struct ifreq s_ifr;
162 ...
163
164 strncpy (s_ifr.ifr_name, "eth0", sizeof(s_ifr.ifr_name));
165
166 /* get interface index of eth0 */
167 ioctl(this->socket, SIOCGIFINDEX, &s_ifr);
168
169 /* fill sockaddr_ll struct to prepare binding */
170 my_addr.sll_family = AF_PACKET;
Wei Yongjun30e7dfe2011-12-22 17:47:54 +0000171 my_addr.sll_protocol = htons(ETH_P_ALL);
Johann Baudy69e3c752009-05-18 22:11:22 -0700172 my_addr.sll_ifindex = s_ifr.ifr_ifindex;
173
174 /* bind socket to eth0 */
175 bind(this->socket, (struct sockaddr *)&my_addr, sizeof(struct sockaddr_ll));
176
177 A complete tutorial is available at: http://wiki.gnu-log.net/
178
Paul Chavent5920cd3a2012-11-06 23:10:47 +0000179By default, the user should put data at :
180 frame base + TPACKET_HDRLEN - sizeof(struct sockaddr_ll)
181
182So, whatever you choose for the socket mode (SOCK_DGRAM or SOCK_RAW),
183the beginning of the user data will be at :
184 frame base + TPACKET_ALIGN(sizeof(struct tpacket_hdr))
185
186If you wish to put user data at a custom offset from the beginning of
187the frame (for payload alignment with SOCK_RAW mode for instance) you
188can set tp_net (with SOCK_DGRAM) or tp_mac (with SOCK_RAW). In order
189to make this work it must be enabled previously with setsockopt()
190and the PACKET_TX_HAS_OFF option.
191
Johann Baudy69e3c752009-05-18 22:11:22 -0700192--------------------------------------------------------------------------------
Linus Torvalds1da177e2005-04-16 15:20:36 -0700193+ PACKET_MMAP settings
194--------------------------------------------------------------------------------
195
Linus Torvalds1da177e2005-04-16 15:20:36 -0700196To setup PACKET_MMAP from user level code is done with a call like
197
Johann Baudy69e3c752009-05-18 22:11:22 -0700198 - Capture process
Linus Torvalds1da177e2005-04-16 15:20:36 -0700199 setsockopt(fd, SOL_PACKET, PACKET_RX_RING, (void *) &req, sizeof(req))
Johann Baudy69e3c752009-05-18 22:11:22 -0700200 - Transmission process
201 setsockopt(fd, SOL_PACKET, PACKET_TX_RING, (void *) &req, sizeof(req))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700202
203The most significant argument in the previous call is the req parameter,
204this parameter must to have the following structure:
205
206 struct tpacket_req
207 {
208 unsigned int tp_block_size; /* Minimal size of contiguous block */
209 unsigned int tp_block_nr; /* Number of blocks */
210 unsigned int tp_frame_size; /* Size of frame */
211 unsigned int tp_frame_nr; /* Total number of frames */
212 };
213
214This structure is defined in /usr/include/linux/if_packet.h and establishes a
Johann Baudy69e3c752009-05-18 22:11:22 -0700215circular buffer (ring) of unswappable memory.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700216Being mapped in the capture process allows reading the captured frames and
217related meta-information like timestamps without requiring a system call.
218
Johann Baudy69e3c752009-05-18 22:11:22 -0700219Frames are grouped in blocks. Each block is a physically contiguous
Linus Torvalds1da177e2005-04-16 15:20:36 -0700220region of memory and holds tp_block_size/tp_frame_size frames. The total number
221of blocks is tp_block_nr. Note that tp_frame_nr is a redundant parameter because
222
223 frames_per_block = tp_block_size/tp_frame_size
224
225indeed, packet_set_ring checks that the following condition is true
226
227 frames_per_block * tp_block_nr == tp_frame_nr
228
Linus Torvalds1da177e2005-04-16 15:20:36 -0700229Lets see an example, with the following values:
230
231 tp_block_size= 4096
232 tp_frame_size= 2048
233 tp_block_nr = 4
234 tp_frame_nr = 8
235
236we will get the following buffer structure:
237
238 block #1 block #2
239+---------+---------+ +---------+---------+
240| frame 1 | frame 2 | | frame 3 | frame 4 |
241+---------+---------+ +---------+---------+
242
243 block #3 block #4
244+---------+---------+ +---------+---------+
245| frame 5 | frame 6 | | frame 7 | frame 8 |
246+---------+---------+ +---------+---------+
247
248A frame can be of any size with the only condition it can fit in a block. A block
249can only hold an integer number of frames, or in other words, a frame cannot
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300250be spawned across two blocks, so there are some details you have to take into
Matt LaPlante6c28f2c2006-10-03 22:46:31 +0200251account when choosing the frame_size. See "Mapping and use of the circular
Linus Torvalds1da177e2005-04-16 15:20:36 -0700252buffer (ring)".
253
Linus Torvalds1da177e2005-04-16 15:20:36 -0700254--------------------------------------------------------------------------------
255+ PACKET_MMAP setting constraints
256--------------------------------------------------------------------------------
257
258In kernel versions prior to 2.4.26 (for the 2.4 branch) and 2.6.5 (2.6 branch),
259the PACKET_MMAP buffer could hold only 32768 frames in a 32 bit architecture or
26016384 in a 64 bit architecture. For information on these kernel versions
261see http://pusa.uv.es/~ulisses/packet_mmap/packet_mmap.pre-2.4.26_2.6.5.txt
262
263 Block size limit
264------------------
265
266As stated earlier, each block is a contiguous physical region of memory. These
267memory regions are allocated with calls to the __get_free_pages() function. As
268the name indicates, this function allocates pages of memory, and the second
269argument is "order" or a power of two number of pages, that is
270(for PAGE_SIZE == 4096) order=0 ==> 4096 bytes, order=1 ==> 8192 bytes,
271order=2 ==> 16384 bytes, etc. The maximum size of a
272region allocated by __get_free_pages is determined by the MAX_ORDER macro. More
273precisely the limit can be calculated as:
274
275 PAGE_SIZE << MAX_ORDER
276
277 In a i386 architecture PAGE_SIZE is 4096 bytes
278 In a 2.4/i386 kernel MAX_ORDER is 10
279 In a 2.6/i386 kernel MAX_ORDER is 11
280
281So get_free_pages can allocate as much as 4MB or 8MB in a 2.4/2.6 kernel
282respectively, with an i386 architecture.
283
284User space programs can include /usr/include/sys/user.h and
285/usr/include/linux/mmzone.h to get PAGE_SIZE MAX_ORDER declarations.
286
287The pagesize can also be determined dynamically with the getpagesize (2)
288system call.
289
Linus Torvalds1da177e2005-04-16 15:20:36 -0700290 Block number limit
291--------------------
292
293To understand the constraints of PACKET_MMAP, we have to see the structure
294used to hold the pointers to each block.
295
296Currently, this structure is a dynamically allocated vector with kmalloc
297called pg_vec, its size limits the number of blocks that can be allocated.
298
299 +---+---+---+---+
300 | x | x | x | x |
301 +---+---+---+---+
302 | | | |
303 | | | v
304 | | v block #4
305 | v block #3
306 v block #2
307 block #1
308
Matt LaPlante2fe0ae72006-10-03 22:50:39 +0200309kmalloc allocates any number of bytes of physically contiguous memory from
310a pool of pre-determined sizes. This pool of memory is maintained by the slab
Uwe Zeisbergerc30fe7f2006-03-24 18:23:14 +0100311allocator which is at the end the responsible for doing the allocation and
312hence which imposes the maximum memory that kmalloc can allocate.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700313
314In a 2.4/2.6 kernel and the i386 architecture, the limit is 131072 bytes. The
315predetermined sizes that kmalloc uses can be checked in the "size-<bytes>"
316entries of /proc/slabinfo
317
318In a 32 bit architecture, pointers are 4 bytes long, so the total number of
319pointers to blocks is
320
321 131072/4 = 32768 blocks
322
Linus Torvalds1da177e2005-04-16 15:20:36 -0700323 PACKET_MMAP buffer size calculator
324------------------------------------
325
326Definitions:
327
328<size-max> : is the maximum size of allocable with kmalloc (see /proc/slabinfo)
329<pointer size>: depends on the architecture -- sizeof(void *)
330<page size> : depends on the architecture -- PAGE_SIZE or getpagesize (2)
331<max-order> : is the value defined with MAX_ORDER
332<frame size> : it's an upper bound of frame's capture size (more on this later)
333
334from these definitions we will derive
335
336 <block number> = <size-max>/<pointer size>
337 <block size> = <pagesize> << <max-order>
338
339so, the max buffer size is
340
341 <block number> * <block size>
342
343and, the number of frames be
344
345 <block number> * <block size> / <frame size>
346
Uwe Zeisberger2e150f62006-04-01 01:29:43 +0200347Suppose the following parameters, which apply for 2.6 kernel and an
Linus Torvalds1da177e2005-04-16 15:20:36 -0700348i386 architecture:
349
350 <size-max> = 131072 bytes
351 <pointer size> = 4 bytes
352 <pagesize> = 4096 bytes
353 <max-order> = 11
354
Matt LaPlante6c28f2c2006-10-03 22:46:31 +0200355and a value for <frame size> of 2048 bytes. These parameters will yield
Linus Torvalds1da177e2005-04-16 15:20:36 -0700356
357 <block number> = 131072/4 = 32768 blocks
358 <block size> = 4096 << 11 = 8 MiB.
359
360and hence the buffer will have a 262144 MiB size. So it can hold
361262144 MiB / 2048 bytes = 134217728 frames
362
Linus Torvalds1da177e2005-04-16 15:20:36 -0700363Actually, this buffer size is not possible with an i386 architecture.
364Remember that the memory is allocated in kernel space, in the case of
365an i386 kernel's memory size is limited to 1GiB.
366
367All memory allocations are not freed until the socket is closed. The memory
368allocations are done with GFP_KERNEL priority, this basically means that
369the allocation can wait and swap other process' memory in order to allocate
Matt LaPlante992caac2006-10-03 22:52:05 +0200370the necessary memory, so normally limits can be reached.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700371
372 Other constraints
373-------------------
374
375If you check the source code you will see that what I draw here as a frame
Matt LaPlante5d3f0832006-11-30 05:21:10 +0100376is not only the link level frame. At the beginning of each frame there is a
Linus Torvalds1da177e2005-04-16 15:20:36 -0700377header called struct tpacket_hdr used in PACKET_MMAP to hold link level's frame
378meta information like timestamp. So what we draw here a frame it's really
379the following (from include/linux/if_packet.h):
380
381/*
382 Frame structure:
383
384 - Start. Frame must be aligned to TPACKET_ALIGNMENT=16
385 - struct tpacket_hdr
386 - pad to TPACKET_ALIGNMENT=16
387 - struct sockaddr_ll
Matt LaPlante3f6dee92006-10-03 22:45:33 +0200388 - Gap, chosen so that packet data (Start+tp_net) aligns to
Linus Torvalds1da177e2005-04-16 15:20:36 -0700389 TPACKET_ALIGNMENT=16
390 - Start+tp_mac: [ Optional MAC header ]
391 - Start+tp_net: Packet data, aligned to TPACKET_ALIGNMENT=16.
392 - Pad to align to TPACKET_ALIGNMENT=16
393 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700394
395 The following are conditions that are checked in packet_set_ring
396
397 tp_block_size must be a multiple of PAGE_SIZE (1)
398 tp_frame_size must be greater than TPACKET_HDRLEN (obvious)
399 tp_frame_size must be a multiple of TPACKET_ALIGNMENT
400 tp_frame_nr must be exactly frames_per_block*tp_block_nr
401
Matt LaPlante6c28f2c2006-10-03 22:46:31 +0200402Note that tp_block_size should be chosen to be a power of two or there will
Linus Torvalds1da177e2005-04-16 15:20:36 -0700403be a waste of memory.
404
405--------------------------------------------------------------------------------
Matt LaPlante6c28f2c2006-10-03 22:46:31 +0200406+ Mapping and use of the circular buffer (ring)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700407--------------------------------------------------------------------------------
408
Matt LaPlante6c28f2c2006-10-03 22:46:31 +0200409The mapping of the buffer in the user process is done with the conventional
Linus Torvalds1da177e2005-04-16 15:20:36 -0700410mmap function. Even the circular buffer is compound of several physically
411discontiguous blocks of memory, they are contiguous to the user space, hence
412just one call to mmap is needed:
413
414 mmap(0, size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
415
416If tp_frame_size is a divisor of tp_block_size frames will be
Matt LaPlanted9195882008-07-25 19:45:33 -0700417contiguously spaced by tp_frame_size bytes. If not, each
Linus Torvalds1da177e2005-04-16 15:20:36 -0700418tp_block_size/tp_frame_size frames there will be a gap between
419the frames. This is because a frame cannot be spawn across two
420blocks.
421
Norbert van Bolhuis7e11daa2014-01-10 10:22:37 +0100422To use one socket for capture and transmission, the mapping of both the
423RX and TX buffer ring has to be done with one call to mmap:
424
425 ...
426 setsockopt(fd, SOL_PACKET, PACKET_RX_RING, &foo, sizeof(foo));
427 setsockopt(fd, SOL_PACKET, PACKET_TX_RING, &bar, sizeof(bar));
428 ...
429 rx_ring = mmap(0, size * 2, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
430 tx_ring = rx_ring + size;
431
432RX must be the first as the kernel maps the TX ring memory right
433after the RX one.
434
Linus Torvalds1da177e2005-04-16 15:20:36 -0700435At the beginning of each frame there is an status field (see
436struct tpacket_hdr). If this field is 0 means that the frame is ready
437to be used for the kernel, If not, there is a frame the user can read
438and the following flags apply:
439
Johann Baudy69e3c752009-05-18 22:11:22 -0700440+++ Capture process:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700441 from include/linux/if_packet.h
442
Alexander Drozdov682f0482015-03-23 09:11:13 +0300443 #define TP_STATUS_COPY (1 << 1)
444 #define TP_STATUS_LOSING (1 << 2)
445 #define TP_STATUS_CSUMNOTREADY (1 << 3)
446 #define TP_STATUS_CSUM_VALID (1 << 7)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700447
Linus Torvalds1da177e2005-04-16 15:20:36 -0700448TP_STATUS_COPY : This flag indicates that the frame (and associated
449 meta information) has been truncated because it's
450 larger than tp_frame_size. This packet can be
451 read entirely with recvfrom().
452
453 In order to make this work it must to be
454 enabled previously with setsockopt() and
455 the PACKET_COPY_THRESH option.
456
Geert Uytterhoevena93c1252014-03-11 11:23:42 +0100457 The number of frames that can be buffered to
Linus Torvalds1da177e2005-04-16 15:20:36 -0700458 be read with recvfrom is limited like a normal socket.
459 See the SO_RCVBUF option in the socket (7) man page.
460
461TP_STATUS_LOSING : indicates there were packet drops from last time
462 statistics where checked with getsockopt() and
463 the PACKET_STATISTICS option.
464
Uwe Zeisbergerc30fe7f2006-03-24 18:23:14 +0100465TP_STATUS_CSUMNOTREADY: currently it's used for outgoing IP packets which
Francis Galieguea33f3222010-04-23 00:08:02 +0200466 its checksum will be done in hardware. So while
Linus Torvalds1da177e2005-04-16 15:20:36 -0700467 reading the packet we should not try to check the
468 checksum.
469
Alexander Drozdov682f0482015-03-23 09:11:13 +0300470TP_STATUS_CSUM_VALID : This flag indicates that at least the transport
471 header checksum of the packet has been already
472 validated on the kernel side. If the flag is not set
473 then we are free to check the checksum by ourselves
474 provided that TP_STATUS_CSUMNOTREADY is also not set.
475
Linus Torvalds1da177e2005-04-16 15:20:36 -0700476for convenience there are also the following defines:
477
478 #define TP_STATUS_KERNEL 0
479 #define TP_STATUS_USER 1
480
481The kernel initializes all frames to TP_STATUS_KERNEL, when the kernel
482receives a packet it puts in the buffer and updates the status with
483at least the TP_STATUS_USER flag. Then the user can read the packet,
484once the packet is read the user must zero the status field, so the kernel
485can use again that frame buffer.
486
487The user can use poll (any other variant should apply too) to check if new
488packets are in the ring:
489
490 struct pollfd pfd;
491
492 pfd.fd = fd;
493 pfd.revents = 0;
494 pfd.events = POLLIN|POLLRDNORM|POLLERR;
495
496 if (status == TP_STATUS_KERNEL)
497 retval = poll(&pfd, 1, timeout);
498
499It doesn't incur in a race condition to first check the status value and
500then poll for frames.
501
Johann Baudy69e3c752009-05-18 22:11:22 -0700502++ Transmission process
503Those defines are also used for transmission:
504
505 #define TP_STATUS_AVAILABLE 0 // Frame is available
506 #define TP_STATUS_SEND_REQUEST 1 // Frame will be sent on next send()
507 #define TP_STATUS_SENDING 2 // Frame is currently in transmission
508 #define TP_STATUS_WRONG_FORMAT 4 // Frame format is not correct
509
510First, the kernel initializes all frames to TP_STATUS_AVAILABLE. To send a
511packet, the user fills a data buffer of an available frame, sets tp_len to
512current data buffer size and sets its status field to TP_STATUS_SEND_REQUEST.
513This can be done on multiple frames. Once the user is ready to transmit, it
514calls send(). Then all buffers with status equal to TP_STATUS_SEND_REQUEST are
515forwarded to the network device. The kernel updates each status of sent
516frames with TP_STATUS_SENDING until the end of transfer.
517At the end of each transfer, buffer status returns to TP_STATUS_AVAILABLE.
518
519 header->tp_len = in_i_size;
520 header->tp_status = TP_STATUS_SEND_REQUEST;
521 retval = send(this->socket, NULL, 0, 0);
522
523The user can also use poll() to check if a buffer is available:
524(status == TP_STATUS_SENDING)
525
526 struct pollfd pfd;
527 pfd.fd = fd;
528 pfd.revents = 0;
529 pfd.events = POLLOUT;
530 retval = poll(&pfd, 1, timeout);
531
Scott McMillan614f60f2010-06-02 05:53:56 -0700532-------------------------------------------------------------------------------
Daniel Borkmannd1ee40f2012-11-08 02:37:01 +0000533+ What TPACKET versions are available and when to use them?
534-------------------------------------------------------------------------------
535
536 int val = tpacket_version;
537 setsockopt(fd, SOL_PACKET, PACKET_VERSION, &val, sizeof(val));
538 getsockopt(fd, SOL_PACKET, PACKET_VERSION, &val, sizeof(val));
539
540where 'tpacket_version' can be TPACKET_V1 (default), TPACKET_V2, TPACKET_V3.
541
542TPACKET_V1:
543 - Default if not otherwise specified by setsockopt(2)
544 - RX_RING, TX_RING available
Daniel Borkmannd1ee40f2012-11-08 02:37:01 +0000545
546TPACKET_V1 --> TPACKET_V2:
547 - Made 64 bit clean due to unsigned long usage in TPACKET_V1
548 structures, thus this also works on 64 bit kernel with 32 bit
549 userspace and the like
550 - Timestamp resolution in nanoseconds instead of microseconds
551 - RX_RING, TX_RING available
Atzm Watanabeac7686b2013-12-20 23:12:20 +0900552 - VLAN metadata information available for packets
553 (TP_STATUS_VLAN_VALID, TP_STATUS_VLAN_TPID_VALID),
554 in the tpacket2_hdr structure:
555 - TP_STATUS_VLAN_VALID bit being set into the tp_status field indicates
556 that the tp_vlan_tci field has valid VLAN TCI value
557 - TP_STATUS_VLAN_TPID_VALID bit being set into the tp_status field
558 indicates that the tp_vlan_tpid field has valid VLAN TPID value
Daniel Borkmannd1ee40f2012-11-08 02:37:01 +0000559 - How to switch to TPACKET_V2:
560 1. Replace struct tpacket_hdr by struct tpacket2_hdr
561 2. Query header len and save
562 3. Set protocol version to 2, set up ring as usual
563 4. For getting the sockaddr_ll,
564 use (void *)hdr + TPACKET_ALIGN(hdrlen) instead of
565 (void *)hdr + TPACKET_ALIGN(sizeof(struct tpacket_hdr))
566
567TPACKET_V2 --> TPACKET_V3:
568 - Flexible buffer implementation:
569 1. Blocks can be configured with non-static frame-size
570 2. Read/poll is at a block-level (as opposed to packet-level)
571 3. Added poll timeout to avoid indefinite user-space wait
572 on idle links
573 4. Added user-configurable knobs:
574 4.1 block::timeout
575 4.2 tpkt_hdr::sk_rxhash
576 - RX Hash data available in user space
577 - Currently only RX_RING available
578
579-------------------------------------------------------------------------------
580+ AF_PACKET fanout mode
581-------------------------------------------------------------------------------
582
583In the AF_PACKET fanout mode, packet reception can be load balanced among
584processes. This also works in combination with mmap(2) on packet sockets.
585
Daniel Borkmann7ec06da2013-08-28 22:13:11 +0200586Currently implemented fanout policies are:
587
Tobias Klauserb0db5cd2014-05-20 13:52:13 +0200588 - PACKET_FANOUT_HASH: schedule to socket by skb's packet hash
Daniel Borkmann7ec06da2013-08-28 22:13:11 +0200589 - PACKET_FANOUT_LB: schedule to socket by round-robin
590 - PACKET_FANOUT_CPU: schedule to socket by CPU packet arrives on
591 - PACKET_FANOUT_RND: schedule to socket by random selection
592 - PACKET_FANOUT_ROLLOVER: if one socket is full, rollover to another
Neil Hormanbb9fbe22014-01-27 11:43:04 -0500593 - PACKET_FANOUT_QM: schedule to socket by skbs recorded queue_mapping
Daniel Borkmann7ec06da2013-08-28 22:13:11 +0200594
Daniel Borkmannd1ee40f2012-11-08 02:37:01 +0000595Minimal example code by David S. Miller (try things like "./test eth0 hash",
596"./test eth0 lb", etc.):
597
598#include <stddef.h>
599#include <stdlib.h>
600#include <stdio.h>
601#include <string.h>
602
603#include <sys/types.h>
604#include <sys/wait.h>
605#include <sys/socket.h>
606#include <sys/ioctl.h>
607
608#include <unistd.h>
609
610#include <linux/if_ether.h>
611#include <linux/if_packet.h>
612
613#include <net/if.h>
614
615static const char *device_name;
616static int fanout_type;
617static int fanout_id;
618
619#ifndef PACKET_FANOUT
620# define PACKET_FANOUT 18
621# define PACKET_FANOUT_HASH 0
622# define PACKET_FANOUT_LB 1
623#endif
624
625static int setup_socket(void)
626{
627 int err, fd = socket(AF_PACKET, SOCK_RAW, htons(ETH_P_IP));
628 struct sockaddr_ll ll;
629 struct ifreq ifr;
630 int fanout_arg;
631
632 if (fd < 0) {
633 perror("socket");
634 return EXIT_FAILURE;
635 }
636
637 memset(&ifr, 0, sizeof(ifr));
638 strcpy(ifr.ifr_name, device_name);
639 err = ioctl(fd, SIOCGIFINDEX, &ifr);
640 if (err < 0) {
641 perror("SIOCGIFINDEX");
642 return EXIT_FAILURE;
643 }
644
645 memset(&ll, 0, sizeof(ll));
646 ll.sll_family = AF_PACKET;
647 ll.sll_ifindex = ifr.ifr_ifindex;
648 err = bind(fd, (struct sockaddr *) &ll, sizeof(ll));
649 if (err < 0) {
650 perror("bind");
651 return EXIT_FAILURE;
652 }
653
654 fanout_arg = (fanout_id | (fanout_type << 16));
655 err = setsockopt(fd, SOL_PACKET, PACKET_FANOUT,
656 &fanout_arg, sizeof(fanout_arg));
657 if (err) {
658 perror("setsockopt");
659 return EXIT_FAILURE;
660 }
661
662 return fd;
663}
664
665static void fanout_thread(void)
666{
667 int fd = setup_socket();
668 int limit = 10000;
669
670 if (fd < 0)
671 exit(fd);
672
673 while (limit-- > 0) {
674 char buf[1600];
675 int err;
676
677 err = read(fd, buf, sizeof(buf));
678 if (err < 0) {
679 perror("read");
680 exit(EXIT_FAILURE);
681 }
682 if ((limit % 10) == 0)
683 fprintf(stdout, "(%d) \n", getpid());
684 }
685
686 fprintf(stdout, "%d: Received 10000 packets\n", getpid());
687
688 close(fd);
689 exit(0);
690}
691
692int main(int argc, char **argp)
693{
694 int fd, err;
695 int i;
696
697 if (argc != 3) {
698 fprintf(stderr, "Usage: %s INTERFACE {hash|lb}\n", argp[0]);
699 return EXIT_FAILURE;
700 }
701
702 if (!strcmp(argp[2], "hash"))
703 fanout_type = PACKET_FANOUT_HASH;
704 else if (!strcmp(argp[2], "lb"))
705 fanout_type = PACKET_FANOUT_LB;
706 else {
707 fprintf(stderr, "Unknown fanout type [%s]\n", argp[2]);
708 exit(EXIT_FAILURE);
709 }
710
711 device_name = argp[1];
712 fanout_id = getpid() & 0xffff;
713
714 for (i = 0; i < 4; i++) {
715 pid_t pid = fork();
716
717 switch (pid) {
718 case 0:
719 fanout_thread();
720
721 case -1:
722 perror("fork");
723 exit(EXIT_FAILURE);
724 }
725 }
726
727 for (i = 0; i < 4; i++) {
728 int status;
729
730 wait(&status);
731 }
732
733 return 0;
734}
735
736-------------------------------------------------------------------------------
Daniel Borkmann4eb06142013-03-29 05:36:29 +0000737+ AF_PACKET TPACKET_V3 example
738-------------------------------------------------------------------------------
739
740AF_PACKET's TPACKET_V3 ring buffer can be configured to use non-static frame
741sizes by doing it's own memory management. It is based on blocks where polling
742works on a per block basis instead of per ring as in TPACKET_V2 and predecessor.
743
744It is said that TPACKET_V3 brings the following benefits:
745 *) ~15 - 20% reduction in CPU-usage
746 *) ~20% increase in packet capture rate
747 *) ~2x increase in packet density
748 *) Port aggregation analysis
749 *) Non static frame size to capture entire packet payload
750
751So it seems to be a good candidate to be used with packet fanout.
752
753Minimal example code by Daniel Borkmann based on Chetan Loke's lolpcap (compile
754it with gcc -Wall -O2 blob.c, and try things like "./a.out eth0", etc.):
755
Daniel Borkmannd70a3f82013-06-06 14:08:13 +0000756/* Written from scratch, but kernel-to-user space API usage
757 * dissected from lolpcap:
758 * Copyright 2011, Chetan Loke <loke.chetan@gmail.com>
759 * License: GPL, version 2.0
760 */
761
Daniel Borkmann4eb06142013-03-29 05:36:29 +0000762#include <stdio.h>
763#include <stdlib.h>
764#include <stdint.h>
765#include <string.h>
766#include <assert.h>
767#include <net/if.h>
768#include <arpa/inet.h>
769#include <netdb.h>
770#include <poll.h>
771#include <unistd.h>
772#include <signal.h>
773#include <inttypes.h>
774#include <sys/socket.h>
775#include <sys/mman.h>
776#include <linux/if_packet.h>
777#include <linux/if_ether.h>
778#include <linux/ip.h>
779
Daniel Borkmann4eb06142013-03-29 05:36:29 +0000780#ifndef likely
781# define likely(x) __builtin_expect(!!(x), 1)
782#endif
783#ifndef unlikely
784# define unlikely(x) __builtin_expect(!!(x), 0)
785#endif
786
787struct block_desc {
788 uint32_t version;
789 uint32_t offset_to_priv;
790 struct tpacket_hdr_v1 h1;
791};
792
793struct ring {
794 struct iovec *rd;
795 uint8_t *map;
796 struct tpacket_req3 req;
797};
798
799static unsigned long packets_total = 0, bytes_total = 0;
800static sig_atomic_t sigint = 0;
801
Daniel Borkmannd70a3f82013-06-06 14:08:13 +0000802static void sighandler(int num)
Daniel Borkmann4eb06142013-03-29 05:36:29 +0000803{
804 sigint = 1;
805}
806
807static int setup_socket(struct ring *ring, char *netdev)
808{
809 int err, i, fd, v = TPACKET_V3;
810 struct sockaddr_ll ll;
Daniel Borkmannd70a3f82013-06-06 14:08:13 +0000811 unsigned int blocksiz = 1 << 22, framesiz = 1 << 11;
812 unsigned int blocknum = 64;
Daniel Borkmann4eb06142013-03-29 05:36:29 +0000813
814 fd = socket(AF_PACKET, SOCK_RAW, htons(ETH_P_ALL));
815 if (fd < 0) {
816 perror("socket");
817 exit(1);
818 }
819
820 err = setsockopt(fd, SOL_PACKET, PACKET_VERSION, &v, sizeof(v));
821 if (err < 0) {
822 perror("setsockopt");
823 exit(1);
824 }
825
826 memset(&ring->req, 0, sizeof(ring->req));
Daniel Borkmannd70a3f82013-06-06 14:08:13 +0000827 ring->req.tp_block_size = blocksiz;
828 ring->req.tp_frame_size = framesiz;
829 ring->req.tp_block_nr = blocknum;
830 ring->req.tp_frame_nr = (blocksiz * blocknum) / framesiz;
831 ring->req.tp_retire_blk_tov = 60;
832 ring->req.tp_feature_req_word = TP_FT_REQ_FILL_RXHASH;
Daniel Borkmann4eb06142013-03-29 05:36:29 +0000833
834 err = setsockopt(fd, SOL_PACKET, PACKET_RX_RING, &ring->req,
835 sizeof(ring->req));
836 if (err < 0) {
837 perror("setsockopt");
838 exit(1);
839 }
840
841 ring->map = mmap(NULL, ring->req.tp_block_size * ring->req.tp_block_nr,
Daniel Borkmannd70a3f82013-06-06 14:08:13 +0000842 PROT_READ | PROT_WRITE, MAP_SHARED | MAP_LOCKED, fd, 0);
Daniel Borkmann4eb06142013-03-29 05:36:29 +0000843 if (ring->map == MAP_FAILED) {
844 perror("mmap");
845 exit(1);
846 }
847
848 ring->rd = malloc(ring->req.tp_block_nr * sizeof(*ring->rd));
849 assert(ring->rd);
850 for (i = 0; i < ring->req.tp_block_nr; ++i) {
851 ring->rd[i].iov_base = ring->map + (i * ring->req.tp_block_size);
852 ring->rd[i].iov_len = ring->req.tp_block_size;
853 }
854
855 memset(&ll, 0, sizeof(ll));
856 ll.sll_family = PF_PACKET;
857 ll.sll_protocol = htons(ETH_P_ALL);
858 ll.sll_ifindex = if_nametoindex(netdev);
859 ll.sll_hatype = 0;
860 ll.sll_pkttype = 0;
861 ll.sll_halen = 0;
862
863 err = bind(fd, (struct sockaddr *) &ll, sizeof(ll));
864 if (err < 0) {
865 perror("bind");
866 exit(1);
867 }
868
869 return fd;
870}
871
Daniel Borkmann4eb06142013-03-29 05:36:29 +0000872static void display(struct tpacket3_hdr *ppd)
873{
874 struct ethhdr *eth = (struct ethhdr *) ((uint8_t *) ppd + ppd->tp_mac);
875 struct iphdr *ip = (struct iphdr *) ((uint8_t *) eth + ETH_HLEN);
876
877 if (eth->h_proto == htons(ETH_P_IP)) {
878 struct sockaddr_in ss, sd;
879 char sbuff[NI_MAXHOST], dbuff[NI_MAXHOST];
880
881 memset(&ss, 0, sizeof(ss));
882 ss.sin_family = PF_INET;
883 ss.sin_addr.s_addr = ip->saddr;
884 getnameinfo((struct sockaddr *) &ss, sizeof(ss),
885 sbuff, sizeof(sbuff), NULL, 0, NI_NUMERICHOST);
886
887 memset(&sd, 0, sizeof(sd));
888 sd.sin_family = PF_INET;
889 sd.sin_addr.s_addr = ip->daddr;
890 getnameinfo((struct sockaddr *) &sd, sizeof(sd),
891 dbuff, sizeof(dbuff), NULL, 0, NI_NUMERICHOST);
892
893 printf("%s -> %s, ", sbuff, dbuff);
894 }
895
896 printf("rxhash: 0x%x\n", ppd->hv1.tp_rxhash);
897}
898
899static void walk_block(struct block_desc *pbd, const int block_num)
900{
Daniel Borkmannd70a3f82013-06-06 14:08:13 +0000901 int num_pkts = pbd->h1.num_pkts, i;
Daniel Borkmann4eb06142013-03-29 05:36:29 +0000902 unsigned long bytes = 0;
Daniel Borkmann4eb06142013-03-29 05:36:29 +0000903 struct tpacket3_hdr *ppd;
904
Daniel Borkmannd70a3f82013-06-06 14:08:13 +0000905 ppd = (struct tpacket3_hdr *) ((uint8_t *) pbd +
906 pbd->h1.offset_to_first_pkt);
Daniel Borkmann4eb06142013-03-29 05:36:29 +0000907 for (i = 0; i < num_pkts; ++i) {
908 bytes += ppd->tp_snaplen;
Daniel Borkmann4eb06142013-03-29 05:36:29 +0000909 display(ppd);
910
Daniel Borkmannd70a3f82013-06-06 14:08:13 +0000911 ppd = (struct tpacket3_hdr *) ((uint8_t *) ppd +
912 ppd->tp_next_offset);
Daniel Borkmann4eb06142013-03-29 05:36:29 +0000913 }
914
Daniel Borkmann4eb06142013-03-29 05:36:29 +0000915 packets_total += num_pkts;
916 bytes_total += bytes;
917}
918
Daniel Borkmannd70a3f82013-06-06 14:08:13 +0000919static void flush_block(struct block_desc *pbd)
Daniel Borkmann4eb06142013-03-29 05:36:29 +0000920{
Daniel Borkmannd70a3f82013-06-06 14:08:13 +0000921 pbd->h1.block_status = TP_STATUS_KERNEL;
Daniel Borkmann4eb06142013-03-29 05:36:29 +0000922}
923
924static void teardown_socket(struct ring *ring, int fd)
925{
926 munmap(ring->map, ring->req.tp_block_size * ring->req.tp_block_nr);
927 free(ring->rd);
928 close(fd);
929}
930
931int main(int argc, char **argp)
932{
933 int fd, err;
934 socklen_t len;
935 struct ring ring;
936 struct pollfd pfd;
Daniel Borkmannd70a3f82013-06-06 14:08:13 +0000937 unsigned int block_num = 0, blocks = 64;
Daniel Borkmann4eb06142013-03-29 05:36:29 +0000938 struct block_desc *pbd;
939 struct tpacket_stats_v3 stats;
940
941 if (argc != 2) {
942 fprintf(stderr, "Usage: %s INTERFACE\n", argp[0]);
943 return EXIT_FAILURE;
944 }
945
946 signal(SIGINT, sighandler);
947
948 memset(&ring, 0, sizeof(ring));
949 fd = setup_socket(&ring, argp[argc - 1]);
950 assert(fd > 0);
951
952 memset(&pfd, 0, sizeof(pfd));
953 pfd.fd = fd;
954 pfd.events = POLLIN | POLLERR;
955 pfd.revents = 0;
956
957 while (likely(!sigint)) {
958 pbd = (struct block_desc *) ring.rd[block_num].iov_base;
Daniel Borkmannd70a3f82013-06-06 14:08:13 +0000959
960 if ((pbd->h1.block_status & TP_STATUS_USER) == 0) {
Daniel Borkmann4eb06142013-03-29 05:36:29 +0000961 poll(&pfd, 1, -1);
Daniel Borkmannd70a3f82013-06-06 14:08:13 +0000962 continue;
Daniel Borkmann4eb06142013-03-29 05:36:29 +0000963 }
964
965 walk_block(pbd, block_num);
966 flush_block(pbd);
Daniel Borkmannd70a3f82013-06-06 14:08:13 +0000967 block_num = (block_num + 1) % blocks;
Daniel Borkmann4eb06142013-03-29 05:36:29 +0000968 }
969
970 len = sizeof(stats);
971 err = getsockopt(fd, SOL_PACKET, PACKET_STATISTICS, &stats, &len);
972 if (err < 0) {
973 perror("getsockopt");
974 exit(1);
975 }
976
977 fflush(stdout);
978 printf("\nReceived %u packets, %lu bytes, %u dropped, freeze_q_cnt: %u\n",
979 stats.tp_packets, bytes_total, stats.tp_drops,
980 stats.tp_freeze_q_cnt);
981
982 teardown_socket(&ring, fd);
983 return 0;
984}
985
986-------------------------------------------------------------------------------
Daniel Borkmannd346a3f2013-12-06 11:36:17 +0100987+ PACKET_QDISC_BYPASS
988-------------------------------------------------------------------------------
989
990If there is a requirement to load the network with many packets in a similar
991fashion as pktgen does, you might set the following option after socket
992creation:
993
994 int one = 1;
995 setsockopt(fd, SOL_PACKET, PACKET_QDISC_BYPASS, &one, sizeof(one));
996
997This has the side-effect, that packets sent through PF_PACKET will bypass the
998kernel's qdisc layer and are forcedly pushed to the driver directly. Meaning,
999packet are not buffered, tc disciplines are ignored, increased loss can occur
1000and such packets are also not visible to other PF_PACKET sockets anymore. So,
1001you have been warned; generally, this can be useful for stress testing various
1002components of a system.
1003
1004On default, PACKET_QDISC_BYPASS is disabled and needs to be explicitly enabled
1005on PF_PACKET sockets.
1006
1007-------------------------------------------------------------------------------
Scott McMillan614f60f2010-06-02 05:53:56 -07001008+ PACKET_TIMESTAMP
1009-------------------------------------------------------------------------------
1010
1011The PACKET_TIMESTAMP setting determines the source of the timestamp in
Daniel Borkmann2940b262013-04-23 00:39:32 +00001012the packet meta information for mmap(2)ed RX_RING and TX_RINGs. If your
1013NIC is capable of timestamping packets in hardware, you can request those
1014hardware timestamps to be used. Note: you may need to enable the generation
1015of hardware timestamps with SIOCSHWTSTAMP (see related information from
1016Documentation/networking/timestamping.txt).
Scott McMillan614f60f2010-06-02 05:53:56 -07001017
Willem de Bruijn68a360e2014-07-25 18:01:31 -04001018PACKET_TIMESTAMP accepts the same integer bit field as SO_TIMESTAMPING:
Scott McMillan614f60f2010-06-02 05:53:56 -07001019
Willem de Bruijn68a360e2014-07-25 18:01:31 -04001020 int req = SOF_TIMESTAMPING_RAW_HARDWARE;
Scott McMillan614f60f2010-06-02 05:53:56 -07001021 setsockopt(fd, SOL_PACKET, PACKET_TIMESTAMP, (void *) &req, sizeof(req))
1022
Daniel Borkmann2940b262013-04-23 00:39:32 +00001023For the mmap(2)ed ring buffers, such timestamps are stored in the
1024tpacket{,2,3}_hdr structure's tp_sec and tp_{n,u}sec members. To determine
1025what kind of timestamp has been reported, the tp_status field is binary |'ed
1026with the following possible bits ...
1027
Daniel Borkmann2940b262013-04-23 00:39:32 +00001028 TP_STATUS_TS_RAW_HARDWARE
1029 TP_STATUS_TS_SOFTWARE
1030
1031... that are equivalent to its SOF_TIMESTAMPING_* counterparts. For the
Willem de Bruijn68a360e2014-07-25 18:01:31 -04001032RX_RING, if neither is set (i.e. PACKET_TIMESTAMP is not set), then a
1033software fallback was invoked *within* PF_PACKET's processing code (less
1034precise).
Daniel Borkmann2940b262013-04-23 00:39:32 +00001035
1036Getting timestamps for the TX_RING works as follows: i) fill the ring frames,
1037ii) call sendto() e.g. in blocking mode, iii) wait for status of relevant
1038frames to be updated resp. the frame handed over to the application, iv) walk
1039through the frames to pick up the individual hw/sw timestamps.
1040
1041Only (!) if transmit timestamping is enabled, then these bits are combined
1042with binary | with TP_STATUS_AVAILABLE, so you must check for that in your
1043application (e.g. !(tp_status & (TP_STATUS_SEND_REQUEST | TP_STATUS_SENDING))
1044in a first step to see if the frame belongs to the application, and then
1045one can extract the type of timestamp in a second step from tp_status)!
1046
1047If you don't care about them, thus having it disabled, checking for
1048TP_STATUS_AVAILABLE resp. TP_STATUS_WRONG_FORMAT is sufficient. If in the
1049TX_RING part only TP_STATUS_AVAILABLE is set, then the tp_sec and tp_{n,u}sec
1050members do not contain a valid value. For TX_RINGs, by default no timestamp
1051is generated!
Scott McMillan614f60f2010-06-02 05:53:56 -07001052
1053See include/linux/net_tstamp.h and Documentation/networking/timestamping
1054for more information on hardware timestamps.
1055
Daniel Borkmannd1ee40f2012-11-08 02:37:01 +00001056-------------------------------------------------------------------------------
1057+ Miscellaneous bits
1058-------------------------------------------------------------------------------
1059
1060- Packet sockets work well together with Linux socket filters, thus you also
1061 might want to have a look at Documentation/networking/filter.txt
1062
Linus Torvalds1da177e2005-04-16 15:20:36 -07001063--------------------------------------------------------------------------------
1064+ THANKS
1065--------------------------------------------------------------------------------
1066
1067 Jesse Brandeburg, for fixing my grammathical/spelling errors
1068