Gitiles
Code Review
Sign In
gerrit-public.fairphone.software
/
kernel
/
msm-4.9
/
d48fc63f6f3f485ed5aa9cf019d8e8e3a7d10263
/
drivers
/
scsi
« Previous
b15ebe0
[SCSI] libsas: replace event locks with atomic bitops
by Dan Williams
· 13 years ago
756f173
[SCSI] libsas: fix leak of dev->sata_dev.identify_[packet_]device
by Dan Williams
· 13 years ago
735f7d2
[SCSI] libsas: fix domain_device leak
by Dan Williams
· 13 years ago
6f4e75a
[SCSI] libsas: kill sas_slave_destroy
by Dan Williams
· 13 years ago
95ac7fd
[SCSI] libsas: remove unused ata_task_resp fields
by Dan Williams
· 13 years ago
18a4d0a
[SCSI] Handle disk devices which can not process medium access commands
by Martin K. Petersen
· 13 years ago
a78e21d
[SCSI] mpt2sas: spell "primitive" correctly in function prototype
by Andrew Morton
· 13 years ago
4fe74b1
[SCSI] virtio-scsi: SCSI driver for QEMU based virtual machines
by Paolo Bonzini
· 13 years ago
5a4f934
[SCSI] hpsa: add some older controllers to the kdump blacklist
by Tomas Henzl
· 13 years ago
47ac56d
[SCSI] scsi_error: classify some ILLEGAL_REQUEST sense as a permanent TARGET_ERROR
by Mike Snitzer
· 13 years ago
8973039
[SCSI] sd: Make sure provisioning mode is reported correctly
by Martin K. Petersen
· 13 years ago
66a651a
[SCSI] Ensure discard failure gets treated as a target problem
by Martin K. Petersen
· 13 years ago
c834b1c
[SCSI] mpt2sas: add missing allocation check
by Tomas Henzl
· 13 years ago
cf3059a
[SCSI] qla4xxx: Update driver version to 5.02.00-k14
by Vikas Chaudhary
· 13 years ago
c0b9d3f
[SCSI] qla4xxx: Added ping support
by Vikas Chaudhary
· 13 years ago
ac20c7b
[SCSI] iscsi_transport: Added Ping support
by Vikas Chaudhary
· 13 years ago
ff88443
[SCSI] qla4xxx: added support for host event
by Vikas Chaudhary
· 13 years ago
a11e254
[SCSI] scsi_transport_iscsi: added support for host event
by Vikas Chaudhary
· 13 years ago
46801ba
[SCSI] qla4xxx: Proper detection of firmware abort error code for ISP82xx
by Vikas Chaudhary
· 13 years ago
badc5b9
[SCSI] qla4xxx: Remove un-necessary print statment
by Lalit Chandivade
· 13 years ago
e8fb00e
[SCSI] qla4xxx: Modified debug log messages for boot info.
by Manish Rangankar
· 13 years ago
20e835b
[SCSI] qla4xxx: Fix verify boot idx correctly
by Lalit Chandivade
· 13 years ago
981c982
[SCSI] qla4xxx: Fix un-necessary delay on invalid DDB
by Lalit Chandivade
· 13 years ago
4585721
[SCSI] qla4xxx: Remove unused code
by Vikas Chaudhary
· 13 years ago
0083208
[SCSI] libfc: Handle discovery failure during ctlr link down
by Bhanu Prakash Gollapudi
· 13 years ago
d4042e9
[SCSI] libfc: Fix panic in fc_exch_recv
by Bhanu Prakash Gollapudi
· 13 years ago
1a8ef41
[SCSI] fcoe: Remove reference counting on 'stuct fcoe_interface'
by Robert Love
· 13 years ago
ccefd23
[SCSI] fcoe: Do not switch context in vport_delete callback
by Robert Love
· 13 years ago
6f68794
[SCSI] fcoe: Rename out_nomod label to out_putmod
by Robert Love
· 13 years ago
7e5adcf
[SCSI] fcoe: Allow exposing FDMI attributes via sysfs
by Neerav Parikh
· 13 years ago
b99fbf6
[SCSI] libfcoe: Don't KERN_ERR on netdev notification
by Robert Love
· 13 years ago
3d2d752
[SCSI] isci: T10 DIF support
by Dave Jiang
· 13 years ago
a6fe35c
[SCSI] qla2xxx: Avoid invalid request queue dereference for bad response packets.
by Arun Easi
· 13 years ago
dafdf89
[SCSI] qla2xxx: Stop iteration after first failure in *_id functions.
by Arun Easi
· 13 years ago
98878a1
[SCSI] qla2xxx: Fix incorrect register access in qla2x00_start_iocbs().
by Arun Easi
· 13 years ago
0eba25d
[SCSI] qla2xxx: Handle device mapping changes due to device logout.
by Arun Easi
· 13 years ago
642ef98
[SCSI] qla2xxx: Add ha->max_fibre_devices to keep track of the maximum number of targets.
by Chad Dupuis
· 13 years ago
7a67735
[SCSI] qla2xxx: Cache swl during fabric discovery.
by Andrew Vasquez
· 13 years ago
733a95b
[SCSI] qla2xxx: Remove EDC sysfs interface.
by Joe Carnuccio
· 13 years ago
f55bfc8
[SCSI] qla2xxx: Perform firmware dump procedure on mailbox command timeout.
by Chad Dupuis
· 13 years ago
a8faa26
[SCSI] qla2xxx: Change the log message when previous dump is available to retrieve for ISP82xx.
by Giridhar Malavali
· 13 years ago
5e19ed9
[SCSI] qla2xxx: Log messages to use correct vha.
by Arun Easi
· 13 years ago
557cf78
[SCSI] qla2xxx: Add new message when a new loopid is assigned.
by Arun Easi
· 13 years ago
880fded
[SCSI] qla2xxx: Fix ql_dbg arguments.
by Arun Easi
· 13 years ago
70a3fc7
[SCSI] qla2xxx: Use ql_log* #define's in ql_log() and ql_log_pci().
by Chad Dupuis
· 13 years ago
3256b43
[SCSI] qla2xxx: Convert remaining printk's to ql_log format.
by Chad Dupuis
· 13 years ago
d8c0d54
[SCSI] qla2xxx: Print mailbox command opcode and return code when a command times out.
by Chad Dupuis
· 13 years ago
7f45dd0
[SCSI] qla2xxx: Reduce mbx-command timeout for Login/Logout requests.
by Andrew Vasquez
· 13 years ago
b7bfbe1
[SCSI] qla2xxx: Prep zero-length BSG data-transfer requests.
by Andrew Vasquez
· 13 years ago
af11f64
[SCSI] qla2xxx: Perform implicit logout during rport tear-down.
by Andrew Vasquez
· 13 years ago
0b91d11
[SCSI] qla2xxx: Handle failure cases during fabric_login
by Chad Dupuis
· 13 years ago
2b29d96
[SCSI] qla2xxx: Increase speed of flash access in ISP82xx adapters to improve firmware load speed.
by Chad Dupuis
· 13 years ago
aa61556
[SCSI] qla2xxx: Return blank sysfs string on initial get thermal failure.
by Joe Carnuccio
· 13 years ago
b3b02e6
[SCSI] qla2xxx: Handle change notifications based on switch scan results.
by Arun Easi
· 13 years ago
18f509d
[SCSI] qla2xxx: Correct print format for edc ql_log() calls.
by Joe Carnuccio
· 13 years ago
37fed3e
[SCSI] qla2xxx: Use consistent DL mask for ELS/CT passthru requests.
by Andrew Vasquez
· 13 years ago
9ba56b9
[SCSI] qla2xxx: Consolidation of SRB processing.
by Giridhar Malavali
· 13 years ago
69e5f1e
[SCSI] qla2xxx: Use a valid enode-mac if none defined.
by Andrew Vasquez
· 13 years ago
6246b8a
[SCSI] qla2xxx: Enhancements to support ISP83xx.
by Giridhar Malavali
· 13 years ago
050c9bb
[SCSI] qla2xxx: Enhanced the dump routines to capture multiple request and response queues.
by Giridhar Malavali
· 13 years ago
1160461
[SCSI] aacraid: Added Sync.mode to support series 7/8/9 controllers
by Mahesh Rajashekhara
· 13 years ago
70fc872
[SCSI] bnx2i: Fixed the override of the error_mask module param
by Eddie Wai
· 13 years ago
93713f3
[SCSI] bnx2i: use kthread_create_on_node()
by Eric Dumazet
· 13 years ago
64b8aa7
[SCSI] bfa: don't leak mem in bfad_im_bsg_els_ct_request()
by Jesper Juhl
· 13 years ago
e5cc6aa
[SCSI] isci: enable clock gating
by Marcin Tomczak
· 13 years ago
e3d338a
[SCSI] libiscsi: fix cmd timeout/completion race
by Mike Christie
· 13 years ago
1304be5
[SCSI] libiscsi_tcp: fix max_r2t manipulation
by Mike Christie
· 13 years ago
df1c7ba
[SCSI] iscsi: fix setting of pid from netlink skb
by Mike Christie
· 13 years ago
46a7c17
[SCSI] iscsi: don't hang in endless loop if no targets present
by Sasha Levin
· 13 years ago
2082ebc
[SCSI] fix the new host byte settings (DID_TARGET_FAILURE and DID_NEXUS_FAILURE)
by Moger, Babu
· 13 years ago
98788a1
[SCSI] bnx2fc: Bumped version to 1.0.10
by Bhanu Prakash Gollapudi
· 13 years ago
7d742f6
[SCSI] bnx2fc: NPIV ports go offline when interface is brought down & up
by Bhanu Prakash Gollapudi
· 13 years ago
44c570b
[SCSI] bnx2fc: Handle LOGO flooding from the target
by Bhanu Prakash Gollapudi
· 13 years ago
2a7b29c
[SCSI] bnx2fc: fix panic in bnx2fc_post_io_req
by Bhanu Prakash Gollapudi
· 13 years ago
9f71af2
[SCSI] fcoe: Allow exposing FDMI attributes via sysfs
by Neerav Parikh
· 13 years ago
6fef390
[SCSI] fcoe: Add support for FDMI in fcoe
by Neerav Parikh
· 13 years ago
d78c317
[SCSI] libfc: Add support for FDMI
by Neerav Parikh
· 13 years ago
1ea2c1d
[SCSI] libfc: Make the libfc Common Transport(CT) code generic
by Neerav Parikh
· 13 years ago
bb8ef58
[SCSI] scsi_transport_fc: Add FDMI host attributes
by Neerav Parikh
· 13 years ago
263d940
[SCSI] hpsa: use find_first_zero_bit
by Akinobu Mita
· 13 years ago
de13e96
[SCSI] scsi_debug: GET LBA STATUS response length correction
by Douglas Gilbert
· 13 years ago
bd9244f
[SCSI] hpsa: update device attributes when they change
by Scott Teel
· 13 years ago
4f4eb9f
[SCSI] hpsa: improve naming on external target device functions
by Scott Teel
· 13 years ago
aca4a52
[SCSI] hpsa: eliminate 8 external target limitation
by Scott Teel
· 13 years ago
1f310bd
[SCSI] hpsa: refactor hpsa_figure_bus_target_lun
by Stephen M. Cameron
· 13 years ago
bbef6c0
[SCSI] hpsa: make target and lun match what SCSI REPORT LUNs returns
by Stephen M. Cameron
· 13 years ago
9bc3711
[SCSI] hpsa: Fix problem with MSA2xxx devices
by Stephen M. Cameron
· 13 years ago
f79cfec
[SCSI] hpsa: factor out driver name
by Stephen M. Cameron
· 13 years ago
b705690
[SCSI] hpsa: combine hpsa_scsi_detect and hpsa_register_scsi
by Stephen M. Cameron
· 13 years ago
d66ae08
[SCSI] hpsa: removed unneeded structure member max_sg_entries and fix badly named constant MAXSGENTRIES
by Stephen M. Cameron
· 13 years ago
55e14e7
[SCSI] hpsa: fix per device memory leak on driver unload
by Stephen M. Cameron
· 13 years ago
26b937b
[SCSI] qla4xxx: Update driver version to 5.02.00-k13
by Vikas Chaudhary
· 13 years ago
3254dbe
[SCSI] qla4xxx: Added support to show port_state and port_speed in sysfs
by Vikas Chaudhary
· 13 years ago
aeddde2
[SCSI] scsi_transport_iscsi: Added support to show port_state and port_speed in sysfs
by Vikas Chaudhary
· 13 years ago
6c1b878
[SCSI] qla4xxx: Added support to show targetalias in sysfs
by Vikas Chaudhary
· 13 years ago
3c5c480
[SCSI] libiscsi: Added support to show targetalias in sysfs
by Vikas Chaudhary
· 13 years ago
331954c
[SCSI] lpfc 8.3.29: Update driver version to 8.3.29
by James Smart
· 13 years ago
b42c07c
[SCSI] lpfc 8.3.29: Remove GFP_KERNEL allocation while lock is held
by James Smart
· 13 years ago
7285990
[SCSI] lpfc 8.3.29: Locking fix and Memory leak Fixes
by James Smart
· 13 years ago
eff4a01
[SCSI] lpfc 8.3.29: FC Discovery state machine fixes
by James Smart
· 13 years ago
Next »