Gitiles
Code Review
Sign In
gerrit-public.fairphone.software
/
kernel
/
msm-4.9
/
f068ad8cca7532bc42115d61489de00fe57c3909
/
drivers
/
scsi
/
qla2xxx
92fd65c
[SCSI] qla2xxx: Cleanup of previous infrastructure.
by Saurav Kashyap
· 13 years ago
7c3df13
[SCSI] qla2xxx: Code changes to support new dynamic logging infrastructure.
by Saurav Kashyap
· 13 years ago
3ce8866
[SCSI] qla2xxx: Basic infrastructure for dynamic logging.
by Saurav Kashyap
· 13 years ago
a06a0f8
scsi: qla_isr.c: fix comment typo 'hammmer'
by Justin P. Mattock
· 13 years ago
57d19e8
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
by Linus Torvalds
· 13 years ago
6ad11ea
[SCSI] qla2xxx: Refactor call to qla2xxx_read_sfp for thermal temperature.
by Joe Carnuccio
· 13 years ago
6766df9
[SCSI] qla2xxx: Unify the read/write sfp mailbox command routines.
by Joe Carnuccio
· 13 years ago
773120e
[SCSI] qla2xxx: Clear complete initialization control block.
by Andrew Vasquez
· 13 years ago
8251592
[SCSI] qla2xxx: Allow an override of the registered maximum LUN.
by Andrew Vasquez
· 13 years ago
24014d0
[SCSI] qla2xxx: Add host number in reset and quiescent message logs.
by Saurav Kashyap
· 13 years ago
1bff6cc
[SCSI] qla2xxx: Correctly read sfp single byte mailbox register.
by Joe Carnuccio
· 13 years ago
d652e09
[SCSI] qla2xxx: Add qla82xx_rom_unlock() function.
by Chad Dupuis
· 13 years ago
875efad7
[SCSI] qla2xxx: Log if qla82xx firmware fails to load from flash.
by Chad Dupuis
· 13 years ago
134ae07
[SCSI] qla2xxx: Use passed in host to initialize local scsi_qla_host in queuecommand function
by Madhuranath Iyengar
· 13 years ago
93d29cc
[SCSI] qla2xxx: Correct buffer start in edc sysfs debug print.
by Joe Carnuccio
· 13 years ago
5329678
[SCSI] qla2xxx: Update firmware version after flash update for ISP82xx.
by Saurav Kashyap
· 13 years ago
43ebf16
[SCSI] qla2xxx: Fix hang during driver unload when vport is active.
by Arun Easi
· 13 years ago
fa96d92
[SCSI] qla2xxx: Properly set the dsd_list_len for dsd_chaining in cmd type 6.
by Andrew Vasquez
· 13 years ago
cefcaba
[SCSI] qla2xxx: Fix virtual port failing to login after chip reset.
by Saurav Kashyap
· 13 years ago
9f40682
[SCSI] qla2xxx: Fix vport delete hang when logins are outstanding.
by Arun Easi
· 13 years ago
c9c2a14
[SCSI] qla2xxx: Update version number to 8.03.07.03-k.
by Madhuranath Iyengar
· 13 years ago
ec426e1
[SCSI] qla2xxx: Log fcport state transitions when debug messages are enabled.
by Chad Dupuis
· 13 years ago
a4f92a3
[SCSI] qla2xxx: Verify login-state has transitioned to PRLI-completed.
by Andrew Vasquez
· 13 years ago
92dbf27
[SCSI] qla2xxx: Limit the logs in case device state does not change for ISP82xx.
by Giridhar Malavali
· 13 years ago
ed0de87
[SCSI] qla2xxx: Add the ql2xdontresethba module_param.
by Giridhar Malavali
· 13 years ago
0e8edb0
[SCSI] qla2xxx: Display hardware/firmware registers to get more information about the error for ISP82xx.
by Giridhar Malavali
· 13 years ago
03bcfb5
[SCSI] qla2xxx: Add test for valid loop id to qla2x00_relogin().
by Joe Carnuccio
· 13 years ago
8f7daea
[SCSI] qla2xxx: Perform FCoE context reset before trying adapter reset for ISP82xx.
by Giridhar Malavali
· 13 years ago
aee3dbc
[SCSI] qla2xxx: Remove extra call to qla82xx_check_fw_alive().
by Giridhar Malavali
· 13 years ago
02be221
[SCSI] qla2xxx: Updated the reset sequence for ISP82xx.
by Giridhar Malavali
· 13 years ago
07e264b
[SCSI] qla2xxx: Update copyright banner.
by Andrew Vasquez
· 13 years ago
c8d6691
[SCSI] qla2xxx: Free firmware PCB on logout request.
by Andrew Vasquez
· 13 years ago
a74ec14
[SCSI] qla2xxx: Include request queue ID in the upper 16-bits of the I/O handle for Abort I/O IOCBs.
by Mike Hernandez
· 13 years ago
3e8bb84
[SCSI] qla2xxx: Remove extraneous setting of FCF_ASYNC_SENT during login-done completion.
by Andrew Vasquez
· 13 years ago
f28a0a9
[SCSI] qla2xxx: Check for a match before attempting to set FCP-priority information.
by Andrew Vasquez
· 13 years ago
80d7944
[SCSI] qla2xxx: Correct calling contexts of qla2x00_mark_device_lost() in async paths.
by Andrew Vasquez
· 13 years ago
1940ce7
[SCSI] qla2xxx: Display PortID information during FCP command-status handling.
by Andrew Vasquez
· 13 years ago
07f9479
Merge branch 'master' into for-next
by Jiri Kosina
· 13 years ago
6eab04a
treewide: remove extra semicolons
by Justin P. Mattock
· 13 years ago
25985ed
Fix common misspellings
by Lucas De Marchi
· 13 years ago
c55d267
Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
by Linus Torvalds
· 13 years ago
76f0c37
[SCSI] qla2xxx: Update version number to 8.03.07.00
by Madhuranath Iyengar
· 14 years ago
4e98d3b
[SCSI] qla2xxx: Check return value of fc_block_scsi_eh()
by Andrew Vasquez
· 14 years ago
e46ef00
[SCSI] qla2xxx: The ISP82XX should be online while waiting for commands completion.
by Saurav Kashyap
· 14 years ago
ff2fc42
[SCSI] qla2xxx: Propagate block-layer tags on submitted I/Os.
by Andrew Vasquez
· 14 years ago
97dec56
[SCSI] qla2xxx: Adjust FCP_RSP response-info field check after TMF completion.
by Andrew Vasquez
· 14 years ago
6aef87b
[SCSI] qla2xxx: Clear any stale login-states during an adapter reset.
by Andrew Vasquez
· 14 years ago
7a78ced
[SCSI] qla2xxx: Pass right CT command string for CT status processing.
by Andrew Vasquez
· 14 years ago
862cd01
[SCSI] qla2xxx: Don't wait for active mailbox command completion when firmware is hung.
by Giridhar Malavali
· 14 years ago
7190575
[SCSI] qla2xxx: Abort pending commands for faster recovery during ISP reset.
by Giridhar Malavali
· 14 years ago
cf2d771
[SCSI] qla2xxx: Display nport_id when any SNS command fails.
by Giridhar Malavali
· 14 years ago
0060ddf
[SCSI] qla2xxx: Reinitialize the device initialize timeout value after reset on ISP82xx.
by Giridhar Malavali
· 14 years ago
7c8cf2f
[SCSI] qla2xxx: Fix array subscript is above array bounds in qla2xx_build_scsi_type_6_iocbs().
by Chad Dupuis
· 14 years ago
f5e3e40
[SCSI] qla2xxx: Remove host_lock in queuecommand function
by Madhuranath Iyengar
· 14 years ago
43d133c
Merge branch 'master' into for-2.6.39
by Tejun Heo
· 14 years ago
1621dbb
[SCSI] qla2xxx: Return DID_NO_CONNECT when FC device is lost.
by Andrew Vasquez
· 14 years ago
044d78e
[SCSI] qla2xxx: Change from irq to irqsave with host_lock
by Madhuranath Iyengar
· 14 years ago
563585e
[SCSI] qla2xxx: Fix race that could hang kthread_stop()
by James Bottomley
· 14 years ago
278274d
scsi/be2iscsi,qla2xxx: convert to alloc_workqueue()
by Tejun Heo
· 14 years ago
aa5cbf8
[SCSI] qla2xxx: Use sg_next to fetch next sg element while walking sg list.
by Giridhar Malavali
· 14 years ago
900a36e
[SCSI] qla2xxx: Fix to avoid recursive lock failure during BSG timeout.
by Giridhar Malavali
· 14 years ago
0ce8791
[SCSI] qla2xxx: Remove code to not reset ISP82xx on failure.
by Giridhar Malavali
· 14 years ago
bc5c2aa
[SCSI] qla2xxx: Display mailbox register 4 during 8012 AEN for ISP82XX parts.
by Andrew Vasquez
· 14 years ago
7a44b86
[SCSI] qla2xxx: Don't perform a BIG_HAMMER if Get-ID (0x20) mailbox command fails on CNAs.
by Andrew Vasquez
· 14 years ago
f2019cb
[SCSI] qla2xxx: Remove redundant module parameter permission bits
by Joe Carnuccio
· 14 years ago
794a569
[SCSI] qla2xxx: Add sysfs node for displaying board temperature.
by Andrew Vasquez
· 14 years ago
10fbb7d
[SCSI] qla2xxx: Code cleanup to remove unwanted comments and code.
by Giridhar Malavali
· 14 years ago
c9e8fd5
[SCSI] qla2xxx: Fix for memory wedge on fw halt for ISP82XX
by Madhuranath Iyengar
· 14 years ago
21090cb
[SCSI] qla2xxx: Update FCP priority information to firmware before sending IOs
by Madhuranath Iyengar
· 14 years ago
4052bd5
[SCSI] qla2xxx: Fixed zero test on new_config in qla2x00_process_loopback().
by Joe Carnuccio
· 14 years ago
ff8073f
[SCSI] qla2xxx: Populate FCP_PRIO location for no *FLT* case
by Andrew Vasquez
· 14 years ago
8ae598d
[SCSI] qla2xxx: list cursors are not null
by Dan Carpenter
· 14 years ago
579d12b
[SCSI] qla2xxx: Added support for quiescence mode for ISP82xx.
by Saurav Kashyap
· 14 years ago
13d38d9
[SCSI] qla2xxx: Update version number to 8.03.05-k0.
by Madhuranath Iyengar
· 14 years ago
69abf61
[SCSI] qla2xxx: Properly set the return value in qla2xxx_eh_abort function.
by Saurav Kashyap
· 14 years ago
087c621
[SCSI] qla2xxx: Correct issue where NPIV-config data was not being allocated for 82xx parts.
by Andrew Vasquez
· 14 years ago
7992abf
[SCSI] qla2xxx: Change MSI initialization from using incorrect request_irq parameter.
by Mike Hernandez
· 14 years ago
85727e1
[SCSI] qla2xxx: Populate Command Type 6 LUN field properly.
by Mike Hernandez
· 14 years ago
f281233
SCSI host lock push-down
by Jeff Garzik
· 14 years ago
38170fa
[SCSI] qla2xxx: Avoid depending on SCSI host_lock in queuecommand function.
by Giridhar Malavali
· 14 years ago
9dac0d9
[SCSI] qla2xxx: Correct PRLI failure response code handling.
by Andrew Vasquez
· 14 years ago
170babc
[SCSI] qla2xxx: Drop srb reference before waiting for completion.
by Mike Christie
· 14 years ago
e30d175
[SCSI] qla2xxx: Addition of shutdown callback handler.
by Madhuranath Iyengar
· 14 years ago
339aa70
[SCSI] qla2xxx: Initialize the vport_slock spinlock.
by Andrew Vasquez
· 14 years ago
09d1dc2
[SCSI] qla2xxx: Remove scsi_cmnd->serial_number from debug traces
by Madhuranath Iyengar
· 14 years ago
f19af16
[SCSI] qla2xxx: Add flash read/update support using BSG interface
by Harish Zunjarrao
· 14 years ago
ff454b0
[SCSI] qla2xxx: Group CS_RESET return status with other link level event statuses.
by Chad Dupuis
· 14 years ago
4d97cc5
[SCSI] qla2xxx: Change del_timer_sync() to del_timer() in qla2x00_ctx_sp_free().
by Chad Dupuis
· 14 years ago
4da26e1
[SCSI] qla2xxx: Add module parameter to enable/disable GFF_ID device type check.
by Chad Dupuis
· 14 years ago
1e6d067
[SCSI] qla2xxx: Remove port down retry count.
by Chad Dupuis
· 14 years ago
542bce1
[SCSI] qla2xxx: locking problem in qla2x00_init_rings()
by Dan Carpenter
· 14 years ago
c70b529
Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
by Linus Torvalds
· 14 years ago
6038f37
llseek: automatically add .llseek fop
by Arnd Bergmann
· 14 years ago
d2b5f10
[SCSI] qla2xxx: prep for fc host dev loss tmo support
by Mike Christie
· 14 years ago
e6a4202
[SCSI] qla2xxx: ROM lock recovery if fw hangs while holding the lock.
by Shyam Sundar
· 14 years ago
bcc5b6d
[SCSI] qla2xxx: AER Support-Return recovered from mmio_enable function for 82XX.
by Saurav Kashyap
· 14 years ago
58548cb
[SCSI] qla2xxx: Increase SG table size to support large IO size per scsi command.
by Giridhar Malavali
· 14 years ago
3fadb80b
[SCSI] qla2xxx: Clear local references of rport on device loss timeout notification from FC transport.
by Giridhar Malavali
· 14 years ago
b1d4698
[SCSI] qla2xxx: Handle MPI timeout indicated by AE8002
by Madhuranath Iyengar
· 14 years ago
bddd2d6
[SCSI] qla2xxx: Update to AER support, do early abort commands.
by Lalit Chandivade
· 14 years ago
Next »