drm/i915: Split GGTT initialisation between probing and setup
In order to handle conflicting drivers (i.e. vgacon) having a different
setup of hardware, we have to remove those other drivers before we try
to setup our own mappings. This requires us to split GGTT initialisation
between probing for the hardware location (part of the PCI BAR) and
later establishing the kernel resources for it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-2-git-send-email-chris@chris-wilson.co.uk
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 83afdd0..8996c2a 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -1004,16 +1004,10 @@
intel_sanitize_options(dev_priv);
- ret = i915_ggtt_init_hw(dev);
+ ret = i915_ggtt_probe_hw(dev);
if (ret)
return ret;
- ret = i915_ggtt_enable_hw(dev);
- if (ret) {
- DRM_ERROR("failed to enable GGTT\n");
- goto out_ggtt;
- }
-
/* WARNING: Apparently we must kick fbdev drivers before vgacon,
* otherwise the vga fbdev driver falls over. */
ret = i915_kick_out_firmware_fb(dev_priv);
@@ -1028,6 +1022,16 @@
goto out_ggtt;
}
+ ret = i915_ggtt_init_hw(dev);
+ if (ret)
+ return ret;
+
+ ret = i915_ggtt_enable_hw(dev);
+ if (ret) {
+ DRM_ERROR("failed to enable GGTT\n");
+ goto out_ggtt;
+ }
+
pci_set_master(dev->pdev);
/* overlay on gen2 is broken and can't address above 1G */
diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c
index 671b1ca..3fc7777 100644
--- a/drivers/gpu/drm/i915/i915_gem_gtt.c
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.c
@@ -3208,10 +3208,10 @@
}
/**
- * i915_ggtt_init_hw - Initialize GGTT hardware
+ * i915_ggtt_probe_hw - Probe GGTT hardware location
* @dev: DRM device
*/
-int i915_ggtt_init_hw(struct drm_device *dev)
+int i915_ggtt_probe_hw(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = to_i915(dev);
struct i915_ggtt *ggtt = &dev_priv->ggtt;
@@ -3254,14 +3254,6 @@
ggtt->mappable_end = min(ggtt->mappable_end, ggtt->base.total);
}
- /*
- * Initialise stolen early so that we may reserve preallocated
- * objects for the BIOS to KMS transition.
- */
- ret = i915_gem_init_stolen(dev);
- if (ret)
- goto out_gtt_cleanup;
-
/* GMADR is the PCI mmio aperture into the global GTT. */
DRM_INFO("Memory usable by graphics device = %lluM\n",
ggtt->base.total >> 20);
@@ -3273,10 +3265,30 @@
#endif
return 0;
+}
+
+/**
+ * i915_ggtt_init_hw - Initialize GGTT hardware
+ * @dev: DRM device
+ */
+int i915_ggtt_init_hw(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ struct i915_ggtt *ggtt = &dev_priv->ggtt;
+ int ret;
+
+ /*
+ * Initialise stolen early so that we may reserve preallocated
+ * objects for the BIOS to KMS transition.
+ */
+ ret = i915_gem_init_stolen(dev);
+ if (ret)
+ goto out_gtt_cleanup;
+
+ return 0;
out_gtt_cleanup:
ggtt->base.cleanup(&ggtt->base);
-
return ret;
}
diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.h b/drivers/gpu/drm/i915/i915_gem_gtt.h
index c4a6579..5b6744a 100644
--- a/drivers/gpu/drm/i915/i915_gem_gtt.h
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.h
@@ -521,6 +521,7 @@
px_dma(ppgtt->base.scratch_pd);
}
+int i915_ggtt_probe_hw(struct drm_device *dev);
int i915_ggtt_init_hw(struct drm_device *dev);
int i915_ggtt_enable_hw(struct drm_device *dev);
void i915_gem_init_ggtt(struct drm_device *dev);