libertas: Improvements on automatic tx power control via SIOCSIWTXPOW.
iwconfig txpower can now be used to set tx power to fixed or auto. If set to
auto the default firmware settings are used.
The command CMD_802_11_PA_CFG is only sent to older firmware, as Dan Williams
noted the command was no longer supported in firmware V9+.
Signed-off-by: Anna Neal <anna@cozybit.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index 802547e..5fef05f 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -1971,6 +1971,70 @@
}
+/**
+ * @brief Configures the transmission power control functionality.
+ *
+ * @param priv A pointer to struct lbs_private structure
+ * @param enable Transmission power control enable
+ * @param p0 Power level when link quality is good (dBm).
+ * @param p1 Power level when link quality is fair (dBm).
+ * @param p2 Power level when link quality is poor (dBm).
+ * @param usesnr Use Signal to Noise Ratio in TPC
+ *
+ * @return 0 on success
+ */
+int lbs_set_tpc_cfg(struct lbs_private *priv, int enable, int8_t p0, int8_t p1,
+ int8_t p2, int usesnr)
+{
+ struct cmd_ds_802_11_tpc_cfg cmd;
+ int ret;
+
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.hdr.size = cpu_to_le16(sizeof(cmd));
+ cmd.action = cpu_to_le16(CMD_ACT_SET);
+ cmd.enable = !!enable;
+ cmd.usesnr = !!enable;
+ cmd.P0 = p0;
+ cmd.P1 = p1;
+ cmd.P2 = p2;
+
+ ret = lbs_cmd_with_response(priv, CMD_802_11_TPC_CFG, &cmd);
+
+ return ret;
+}
+
+/**
+ * @brief Configures the power adaptation settings.
+ *
+ * @param priv A pointer to struct lbs_private structure
+ * @param enable Power adaptation enable
+ * @param p0 Power level for 1, 2, 5.5 and 11 Mbps (dBm).
+ * @param p1 Power level for 6, 9, 12, 18, 22, 24 and 36 Mbps (dBm).
+ * @param p2 Power level for 48 and 54 Mbps (dBm).
+ *
+ * @return 0 on Success
+ */
+
+int lbs_set_power_adapt_cfg(struct lbs_private *priv, int enable, int8_t p0,
+ int8_t p1, int8_t p2)
+{
+ struct cmd_ds_802_11_pa_cfg cmd;
+ int ret;
+
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.hdr.size = cpu_to_le16(sizeof(cmd));
+ cmd.action = cpu_to_le16(CMD_ACT_SET);
+ cmd.enable = !!enable;
+ cmd.P0 = p0;
+ cmd.P1 = p1;
+ cmd.P2 = p2;
+
+ ret = lbs_cmd_with_response(priv, CMD_802_11_PA_CFG , &cmd);
+
+ return ret;
+}
+
+
static struct cmd_ctrl_node *__lbs_cmd_async(struct lbs_private *priv,
uint16_t command, struct cmd_header *in_cmd, int in_cmd_size,
int (*callback)(struct lbs_private *, unsigned long, struct cmd_header *),