| # SPDX-License-Identifier: GPL-2.0-only |
| |
| menuconfig CRYPTO_HW |
| bool "Hardware crypto devices" |
| default y |
| ---help--- |
| Say Y here to get to see options for hardware crypto devices and |
| processors. This option alone does not add any kernel code. |
| |
| If you say N, all options in this submenu will be skipped and disabled. |
| |
| if CRYPTO_HW |
| |
| config CRYPTO_DEV_PADLOCK |
| tristate "Support for VIA PadLock ACE" |
| depends on X86 && !UML |
| help |
| Some VIA processors come with an integrated crypto engine |
| (so called VIA PadLock ACE, Advanced Cryptography Engine) |
| that provides instructions for very fast cryptographic |
| operations with supported algorithms. |
| |
| The instructions are used only when the CPU supports them. |
| Otherwise software encryption is used. |
| |
| config CRYPTO_DEV_PADLOCK_AES |
| tristate "PadLock driver for AES algorithm" |
| depends on CRYPTO_DEV_PADLOCK |
| select CRYPTO_BLKCIPHER |
| select CRYPTO_LIB_AES |
| help |
| Use VIA PadLock for AES algorithm. |
| |
| Available in VIA C3 and newer CPUs. |
| |
| If unsure say M. The compiled module will be |
| called padlock-aes. |
| |
| config CRYPTO_DEV_PADLOCK_SHA |
| tristate "PadLock driver for SHA1 and SHA256 algorithms" |
| depends on CRYPTO_DEV_PADLOCK |
| select CRYPTO_HASH |
| select CRYPTO_SHA1 |
| select CRYPTO_SHA256 |
| help |
| Use VIA PadLock for SHA1/SHA256 algorithms. |
| |
| Available in VIA C7 and newer processors. |
| |
| If unsure say M. The compiled module will be |
| called padlock-sha. |
| |
| config CRYPTO_DEV_GEODE |
| tristate "Support for the Geode LX AES engine" |
| depends on X86_32 && PCI |
| select CRYPTO_ALGAPI |
| select CRYPTO_BLKCIPHER |
| help |
| Say 'Y' here to use the AMD Geode LX processor on-board AES |
| engine for the CryptoAPI AES algorithm. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called geode-aes. |
| |
| config ZCRYPT |
| tristate "Support for s390 cryptographic adapters" |
| depends on S390 |
| select HW_RANDOM |
| help |
| Select this option if you want to enable support for |
| s390 cryptographic adapters like: |
| + PCI-X Cryptographic Coprocessor (PCIXCC) |
| + Crypto Express 2,3,4 or 5 Coprocessor (CEXxC) |
| + Crypto Express 2,3,4 or 5 Accelerator (CEXxA) |
| + Crypto Express 4 or 5 EP11 Coprocessor (CEXxP) |
| |
| config ZCRYPT_MULTIDEVNODES |
| bool "Support for multiple zcrypt device nodes" |
| default y |
| depends on S390 |
| depends on ZCRYPT |
| help |
| With this option enabled the zcrypt device driver can |
| provide multiple devices nodes in /dev. Each device |
| node can get customized to limit access and narrow |
| down the use of the available crypto hardware. |
| |
| config PKEY |
| tristate "Kernel API for protected key handling" |
| depends on S390 |
| depends on ZCRYPT |
| help |
| With this option enabled the pkey kernel module provides an API |
| for creation and handling of protected keys. Other parts of the |
| kernel or userspace applications may use these functions. |
| |
| Select this option if you want to enable the kernel and userspace |
| API for proteced key handling. |
| |
| Please note that creation of protected keys from secure keys |
| requires to have at least one CEX card in coprocessor mode |
| available at runtime. |
| |
| config CRYPTO_PAES_S390 |
| tristate "PAES cipher algorithms" |
| depends on S390 |
| depends on ZCRYPT |
| depends on PKEY |
| select CRYPTO_ALGAPI |
| select CRYPTO_BLKCIPHER |
| help |
| This is the s390 hardware accelerated implementation of the |
| AES cipher algorithms for use with protected key. |
| |
| Select this option if you want to use the paes cipher |
| for example to use protected key encrypted devices. |
| |
| config CRYPTO_SHA1_S390 |
| tristate "SHA1 digest algorithm" |
| depends on S390 |
| select CRYPTO_HASH |
| help |
| This is the s390 hardware accelerated implementation of the |
| SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2). |
| |
| It is available as of z990. |
| |
| config CRYPTO_SHA256_S390 |
| tristate "SHA256 digest algorithm" |
| depends on S390 |
| select CRYPTO_HASH |
| help |
| This is the s390 hardware accelerated implementation of the |
| SHA256 secure hash standard (DFIPS 180-2). |
| |
| It is available as of z9. |
| |
| config CRYPTO_SHA512_S390 |
| tristate "SHA384 and SHA512 digest algorithm" |
| depends on S390 |
| select CRYPTO_HASH |
| help |
| This is the s390 hardware accelerated implementation of the |
| SHA512 secure hash standard. |
| |
| It is available as of z10. |
| |
| config CRYPTO_DES_S390 |
| tristate "DES and Triple DES cipher algorithms" |
| depends on S390 |
| select CRYPTO_ALGAPI |
| select CRYPTO_BLKCIPHER |
| select CRYPTO_LIB_DES |
| help |
| This is the s390 hardware accelerated implementation of the |
| DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3). |
| |
| As of z990 the ECB and CBC mode are hardware accelerated. |
| As of z196 the CTR mode is hardware accelerated. |
| |
| config CRYPTO_AES_S390 |
| tristate "AES cipher algorithms" |
| depends on S390 |
| select CRYPTO_ALGAPI |
| select CRYPTO_BLKCIPHER |
| help |
| This is the s390 hardware accelerated implementation of the |
| AES cipher algorithms (FIPS-197). |
| |
| As of z9 the ECB and CBC modes are hardware accelerated |
| for 128 bit keys. |
| As of z10 the ECB and CBC modes are hardware accelerated |
| for all AES key sizes. |
| As of z196 the CTR mode is hardware accelerated for all AES |
| key sizes and XTS mode is hardware accelerated for 256 and |
| 512 bit keys. |
| |
| config S390_PRNG |
| tristate "Pseudo random number generator device driver" |
| depends on S390 |
| default "m" |
| help |
| Select this option if you want to use the s390 pseudo random number |
| generator. The PRNG is part of the cryptographic processor functions |
| and uses triple-DES to generate secure random numbers like the |
| ANSI X9.17 standard. User-space programs access the |
| pseudo-random-number device through the char device /dev/prandom. |
| |
| It is available as of z9. |
| |
| config CRYPTO_GHASH_S390 |
| tristate "GHASH hash function" |
| depends on S390 |
| select CRYPTO_HASH |
| help |
| This is the s390 hardware accelerated implementation of GHASH, |
| the hash function used in GCM (Galois/Counter mode). |
| |
| It is available as of z196. |
| |
| config CRYPTO_CRC32_S390 |
| tristate "CRC-32 algorithms" |
| depends on S390 |
| select CRYPTO_HASH |
| select CRC32 |
| help |
| Select this option if you want to use hardware accelerated |
| implementations of CRC algorithms. With this option, you |
| can optimize the computation of CRC-32 (IEEE 802.3 Ethernet) |
| and CRC-32C (Castagnoli). |
| |
| It is available with IBM z13 or later. |
| |
| config CRYPTO_DEV_MARVELL_CESA |
| tristate "Marvell's Cryptographic Engine driver" |
| depends on PLAT_ORION || ARCH_MVEBU |
| select CRYPTO_LIB_AES |
| select CRYPTO_LIB_DES |
| select CRYPTO_BLKCIPHER |
| select CRYPTO_HASH |
| select SRAM |
| help |
| This driver allows you to utilize the Cryptographic Engines and |
| Security Accelerator (CESA) which can be found on MVEBU and ORION |
| platforms. |
| This driver supports CPU offload through DMA transfers. |
| |
| config CRYPTO_DEV_NIAGARA2 |
| tristate "Niagara2 Stream Processing Unit driver" |
| select CRYPTO_LIB_DES |
| select CRYPTO_BLKCIPHER |
| select CRYPTO_HASH |
| select CRYPTO_MD5 |
| select CRYPTO_SHA1 |
| select CRYPTO_SHA256 |
| depends on SPARC64 |
| help |
| Each core of a Niagara2 processor contains a Stream |
| Processing Unit, which itself contains several cryptographic |
| sub-units. One set provides the Modular Arithmetic Unit, |
| used for SSL offload. The other set provides the Cipher |
| Group, which can perform encryption, decryption, hashing, |
| checksumming, and raw copies. |
| |
| config CRYPTO_DEV_HIFN_795X |
| tristate "Driver HIFN 795x crypto accelerator chips" |
| select CRYPTO_LIB_DES |
| select CRYPTO_BLKCIPHER |
| select HW_RANDOM if CRYPTO_DEV_HIFN_795X_RNG |
| depends on PCI |
| depends on !ARCH_DMA_ADDR_T_64BIT |
| help |
| This option allows you to have support for HIFN 795x crypto adapters. |
| |
| config CRYPTO_DEV_HIFN_795X_RNG |
| bool "HIFN 795x random number generator" |
| depends on CRYPTO_DEV_HIFN_795X |
| help |
| Select this option if you want to enable the random number generator |
| on the HIFN 795x crypto adapters. |
| |
| source "drivers/crypto/caam/Kconfig" |
| |
| config CRYPTO_DEV_TALITOS |
| tristate "Talitos Freescale Security Engine (SEC)" |
| select CRYPTO_AEAD |
| select CRYPTO_AUTHENC |
| select CRYPTO_BLKCIPHER |
| select CRYPTO_HASH |
| select HW_RANDOM |
| depends on FSL_SOC |
| help |
| Say 'Y' here to use the Freescale Security Engine (SEC) |
| to offload cryptographic algorithm computation. |
| |
| The Freescale SEC is present on PowerQUICC 'E' processors, such |
| as the MPC8349E and MPC8548E. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called talitos. |
| |
| config CRYPTO_DEV_TALITOS1 |
| bool "SEC1 (SEC 1.0 and SEC Lite 1.2)" |
| depends on CRYPTO_DEV_TALITOS |
| depends on PPC_8xx || PPC_82xx |
| default y |
| help |
| Say 'Y' here to use the Freescale Security Engine (SEC) version 1.0 |
| found on MPC82xx or the Freescale Security Engine (SEC Lite) |
| version 1.2 found on MPC8xx |
| |
| config CRYPTO_DEV_TALITOS2 |
| bool "SEC2+ (SEC version 2.0 or upper)" |
| depends on CRYPTO_DEV_TALITOS |
| default y if !PPC_8xx |
| help |
| Say 'Y' here to use the Freescale Security Engine (SEC) |
| version 2 and following as found on MPC83xx, MPC85xx, etc ... |
| |
| config CRYPTO_DEV_IXP4XX |
| tristate "Driver for IXP4xx crypto hardware acceleration" |
| depends on ARCH_IXP4XX && IXP4XX_QMGR && IXP4XX_NPE |
| select CRYPTO_LIB_DES |
| select CRYPTO_AEAD |
| select CRYPTO_AUTHENC |
| select CRYPTO_BLKCIPHER |
| help |
| Driver for the IXP4xx NPE crypto engine. |
| |
| config CRYPTO_DEV_PPC4XX |
| tristate "Driver AMCC PPC4xx crypto accelerator" |
| depends on PPC && 4xx |
| select CRYPTO_HASH |
| select CRYPTO_AEAD |
| select CRYPTO_LIB_AES |
| select CRYPTO_CCM |
| select CRYPTO_CTR |
| select CRYPTO_GCM |
| select CRYPTO_BLKCIPHER |
| help |
| This option allows you to have support for AMCC crypto acceleration. |
| |
| config HW_RANDOM_PPC4XX |
| bool "PowerPC 4xx generic true random number generator support" |
| depends on CRYPTO_DEV_PPC4XX && HW_RANDOM |
| default y |
| ---help--- |
| This option provides the kernel-side support for the TRNG hardware |
| found in the security function of some PowerPC 4xx SoCs. |
| |
| config CRYPTO_DEV_OMAP |
| tristate "Support for OMAP crypto HW accelerators" |
| depends on ARCH_OMAP2PLUS |
| help |
| OMAP processors have various crypto HW accelerators. Select this if |
| you want to use the OMAP modules for any of the crypto algorithms. |
| |
| if CRYPTO_DEV_OMAP |
| |
| config CRYPTO_DEV_OMAP_SHAM |
| tristate "Support for OMAP MD5/SHA1/SHA2 hw accelerator" |
| depends on ARCH_OMAP2PLUS |
| select CRYPTO_SHA1 |
| select CRYPTO_MD5 |
| select CRYPTO_SHA256 |
| select CRYPTO_SHA512 |
| select CRYPTO_HMAC |
| help |
| OMAP processors have MD5/SHA1/SHA2 hw accelerator. Select this if you |
| want to use the OMAP module for MD5/SHA1/SHA2 algorithms. |
| |
| config CRYPTO_DEV_OMAP_AES |
| tristate "Support for OMAP AES hw engine" |
| depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP2PLUS |
| select CRYPTO_AES |
| select CRYPTO_BLKCIPHER |
| select CRYPTO_ENGINE |
| select CRYPTO_CBC |
| select CRYPTO_ECB |
| select CRYPTO_CTR |
| select CRYPTO_AEAD |
| help |
| OMAP processors have AES module accelerator. Select this if you |
| want to use the OMAP module for AES algorithms. |
| |
| config CRYPTO_DEV_OMAP_DES |
| tristate "Support for OMAP DES/3DES hw engine" |
| depends on ARCH_OMAP2PLUS |
| select CRYPTO_LIB_DES |
| select CRYPTO_BLKCIPHER |
| select CRYPTO_ENGINE |
| help |
| OMAP processors have DES/3DES module accelerator. Select this if you |
| want to use the OMAP module for DES and 3DES algorithms. Currently |
| the ECB and CBC modes of operation are supported by the driver. Also |
| accesses made on unaligned boundaries are supported. |
| |
| endif # CRYPTO_DEV_OMAP |
| |
| config CRYPTO_DEV_PICOXCELL |
| tristate "Support for picoXcell IPSEC and Layer2 crypto engines" |
| depends on (ARCH_PICOXCELL || COMPILE_TEST) && HAVE_CLK |
| select CRYPTO_AEAD |
| select CRYPTO_AES |
| select CRYPTO_AUTHENC |
| select CRYPTO_BLKCIPHER |
| select CRYPTO_LIB_DES |
| select CRYPTO_CBC |
| select CRYPTO_ECB |
| select CRYPTO_SEQIV |
| help |
| This option enables support for the hardware offload engines in the |
| Picochip picoXcell SoC devices. Select this for IPSEC ESP offload |
| and for 3gpp Layer 2 ciphering support. |
| |
| Saying m here will build a module named pipcoxcell_crypto. |
| |
| config CRYPTO_DEV_SAHARA |
| tristate "Support for SAHARA crypto accelerator" |
| depends on ARCH_MXC && OF |
| select CRYPTO_BLKCIPHER |
| select CRYPTO_AES |
| select CRYPTO_ECB |
| help |
| This option enables support for the SAHARA HW crypto accelerator |
| found in some Freescale i.MX chips. |
| |
| config CRYPTO_DEV_EXYNOS_RNG |
| tristate "EXYNOS HW pseudo random number generator support" |
| depends on ARCH_EXYNOS || COMPILE_TEST |
| depends on HAS_IOMEM |
| select CRYPTO_RNG |
| ---help--- |
| This driver provides kernel-side support through the |
| cryptographic API for the pseudo random number generator hardware |
| found on Exynos SoCs. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called exynos-rng. |
| |
| If unsure, say Y. |
| |
| config CRYPTO_DEV_S5P |
| tristate "Support for Samsung S5PV210/Exynos crypto accelerator" |
| depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST |
| depends on HAS_IOMEM |
| select CRYPTO_AES |
| select CRYPTO_BLKCIPHER |
| help |
| This option allows you to have support for S5P crypto acceleration. |
| Select this to offload Samsung S5PV210 or S5PC110, Exynos from AES |
| algorithms execution. |
| |
| config CRYPTO_DEV_EXYNOS_HASH |
| bool "Support for Samsung Exynos HASH accelerator" |
| depends on CRYPTO_DEV_S5P |
| depends on !CRYPTO_DEV_EXYNOS_RNG && CRYPTO_DEV_EXYNOS_RNG!=m |
| select CRYPTO_SHA1 |
| select CRYPTO_MD5 |
| select CRYPTO_SHA256 |
| help |
| Select this to offload Exynos from HASH MD5/SHA1/SHA256. |
| This will select software SHA1, MD5 and SHA256 as they are |
| needed for small and zero-size messages. |
| HASH algorithms will be disabled if EXYNOS_RNG |
| is enabled due to hw conflict. |
| |
| config CRYPTO_DEV_NX |
| bool "Support for IBM PowerPC Nest (NX) cryptographic acceleration" |
| depends on PPC64 |
| help |
| This enables support for the NX hardware cryptographic accelerator |
| coprocessor that is in IBM PowerPC P7+ or later processors. This |
| does not actually enable any drivers, it only allows you to select |
| which acceleration type (encryption and/or compression) to enable. |
| |
| if CRYPTO_DEV_NX |
| source "drivers/crypto/nx/Kconfig" |
| endif |
| |
| config CRYPTO_DEV_UX500 |
| tristate "Driver for ST-Ericsson UX500 crypto hardware acceleration" |
| depends on ARCH_U8500 |
| help |
| Driver for ST-Ericsson UX500 crypto engine. |
| |
| if CRYPTO_DEV_UX500 |
| source "drivers/crypto/ux500/Kconfig" |
| endif # if CRYPTO_DEV_UX500 |
| |
| config CRYPTO_DEV_ATMEL_AUTHENC |
| tristate "Support for Atmel IPSEC/SSL hw accelerator" |
| depends on ARCH_AT91 || COMPILE_TEST |
| select CRYPTO_AUTHENC |
| select CRYPTO_DEV_ATMEL_AES |
| select CRYPTO_DEV_ATMEL_SHA |
| help |
| Some Atmel processors can combine the AES and SHA hw accelerators |
| to enhance support of IPSEC/SSL. |
| Select this if you want to use the Atmel modules for |
| authenc(hmac(shaX),Y(cbc)) algorithms. |
| |
| config CRYPTO_DEV_ATMEL_AES |
| tristate "Support for Atmel AES hw accelerator" |
| depends on ARCH_AT91 || COMPILE_TEST |
| select CRYPTO_AES |
| select CRYPTO_AEAD |
| select CRYPTO_BLKCIPHER |
| help |
| Some Atmel processors have AES hw accelerator. |
| Select this if you want to use the Atmel module for |
| AES algorithms. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called atmel-aes. |
| |
| config CRYPTO_DEV_ATMEL_TDES |
| tristate "Support for Atmel DES/TDES hw accelerator" |
| depends on ARCH_AT91 || COMPILE_TEST |
| select CRYPTO_LIB_DES |
| select CRYPTO_BLKCIPHER |
| help |
| Some Atmel processors have DES/TDES hw accelerator. |
| Select this if you want to use the Atmel module for |
| DES/TDES algorithms. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called atmel-tdes. |
| |
| config CRYPTO_DEV_ATMEL_SHA |
| tristate "Support for Atmel SHA hw accelerator" |
| depends on ARCH_AT91 || COMPILE_TEST |
| select CRYPTO_HASH |
| help |
| Some Atmel processors have SHA1/SHA224/SHA256/SHA384/SHA512 |
| hw accelerator. |
| Select this if you want to use the Atmel module for |
| SHA1/SHA224/SHA256/SHA384/SHA512 algorithms. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called atmel-sha. |
| |
| config CRYPTO_DEV_ATMEL_I2C |
| tristate |
| |
| config CRYPTO_DEV_ATMEL_ECC |
| tristate "Support for Microchip / Atmel ECC hw accelerator" |
| depends on I2C |
| select CRYPTO_DEV_ATMEL_I2C |
| select CRYPTO_ECDH |
| select CRC16 |
| help |
| Microhip / Atmel ECC hw accelerator. |
| Select this if you want to use the Microchip / Atmel module for |
| ECDH algorithm. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called atmel-ecc. |
| |
| config CRYPTO_DEV_ATMEL_SHA204A |
| tristate "Support for Microchip / Atmel SHA accelerator and RNG" |
| depends on I2C |
| select CRYPTO_DEV_ATMEL_I2C |
| select HW_RANDOM |
| select CRC16 |
| help |
| Microhip / Atmel SHA accelerator and RNG. |
| Select this if you want to use the Microchip / Atmel SHA204A |
| module as a random number generator. (Other functions of the |
| chip are currently not exposed by this driver) |
| |
| To compile this driver as a module, choose M here: the module |
| will be called atmel-sha204a. |
| |
| config CRYPTO_DEV_CCP |
| bool "Support for AMD Secure Processor" |
| depends on ((X86 && PCI) || (ARM64 && (OF_ADDRESS || ACPI))) && HAS_IOMEM |
| help |
| The AMD Secure Processor provides support for the Cryptographic Coprocessor |
| (CCP) and the Platform Security Processor (PSP) devices. |
| |
| if CRYPTO_DEV_CCP |
| source "drivers/crypto/ccp/Kconfig" |
| endif |
| |
| config CRYPTO_DEV_MXS_DCP |
| tristate "Support for Freescale MXS DCP" |
| depends on (ARCH_MXS || ARCH_MXC) |
| select STMP_DEVICE |
| select CRYPTO_CBC |
| select CRYPTO_ECB |
| select CRYPTO_AES |
| select CRYPTO_BLKCIPHER |
| select CRYPTO_HASH |
| help |
| The Freescale i.MX23/i.MX28 has SHA1/SHA256 and AES128 CBC/ECB |
| co-processor on the die. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called mxs-dcp. |
| |
| source "drivers/crypto/qat/Kconfig" |
| source "drivers/crypto/cavium/cpt/Kconfig" |
| source "drivers/crypto/cavium/nitrox/Kconfig" |
| |
| config CRYPTO_DEV_CAVIUM_ZIP |
| tristate "Cavium ZIP driver" |
| depends on PCI && 64BIT && (ARM64 || COMPILE_TEST) |
| ---help--- |
| Select this option if you want to enable compression/decompression |
| acceleration on Cavium's ARM based SoCs |
| |
| config CRYPTO_DEV_QCE |
| tristate "Qualcomm crypto engine accelerator" |
| depends on ARCH_QCOM || COMPILE_TEST |
| depends on HAS_IOMEM |
| select CRYPTO_AES |
| select CRYPTO_LIB_DES |
| select CRYPTO_ECB |
| select CRYPTO_CBC |
| select CRYPTO_XTS |
| select CRYPTO_CTR |
| select CRYPTO_BLKCIPHER |
| help |
| This driver supports Qualcomm crypto engine accelerator |
| hardware. To compile this driver as a module, choose M here. The |
| module will be called qcrypto. |
| |
| config CRYPTO_DEV_QCOM_RNG |
| tristate "Qualcomm Random Number Generator Driver" |
| depends on ARCH_QCOM || COMPILE_TEST |
| select CRYPTO_RNG |
| help |
| This driver provides support for the Random Number |
| Generator hardware found on Qualcomm SoCs. |
| |
| To compile this driver as a module, choose M here. The |
| module will be called qcom-rng. If unsure, say N. |
| |
| config CRYPTO_DEV_VMX |
| bool "Support for VMX cryptographic acceleration instructions" |
| depends on PPC64 && VSX |
| help |
| Support for VMX cryptographic acceleration instructions. |
| |
| source "drivers/crypto/vmx/Kconfig" |
| |
| config CRYPTO_DEV_IMGTEC_HASH |
| tristate "Imagination Technologies hardware hash accelerator" |
| depends on MIPS || COMPILE_TEST |
| select CRYPTO_MD5 |
| select CRYPTO_SHA1 |
| select CRYPTO_SHA256 |
| select CRYPTO_HASH |
| help |
| This driver interfaces with the Imagination Technologies |
| hardware hash accelerator. Supporting MD5/SHA1/SHA224/SHA256 |
| hashing algorithms. |
| |
| config CRYPTO_DEV_SUN4I_SS |
| tristate "Support for Allwinner Security System cryptographic accelerator" |
| depends on ARCH_SUNXI && !64BIT |
| select CRYPTO_MD5 |
| select CRYPTO_SHA1 |
| select CRYPTO_AES |
| select CRYPTO_LIB_DES |
| select CRYPTO_BLKCIPHER |
| help |
| Some Allwinner SoC have a crypto accelerator named |
| Security System. Select this if you want to use it. |
| The Security System handle AES/DES/3DES ciphers in CBC mode |
| and SHA1 and MD5 hash algorithms. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called sun4i-ss. |
| |
| config CRYPTO_DEV_SUN4I_SS_PRNG |
| bool "Support for Allwinner Security System PRNG" |
| depends on CRYPTO_DEV_SUN4I_SS |
| select CRYPTO_RNG |
| help |
| Select this option if you want to provide kernel-side support for |
| the Pseudo-Random Number Generator found in the Security System. |
| |
| config CRYPTO_DEV_ROCKCHIP |
| tristate "Rockchip's Cryptographic Engine driver" |
| depends on OF && ARCH_ROCKCHIP |
| select CRYPTO_AES |
| select CRYPTO_LIB_DES |
| select CRYPTO_MD5 |
| select CRYPTO_SHA1 |
| select CRYPTO_SHA256 |
| select CRYPTO_HASH |
| select CRYPTO_BLKCIPHER |
| |
| help |
| This driver interfaces with the hardware crypto accelerator. |
| Supporting cbc/ecb chainmode, and aes/des/des3_ede cipher mode. |
| |
| config CRYPTO_DEV_MEDIATEK |
| tristate "MediaTek's EIP97 Cryptographic Engine driver" |
| depends on (ARM && ARCH_MEDIATEK) || COMPILE_TEST |
| select CRYPTO_AES |
| select CRYPTO_AEAD |
| select CRYPTO_BLKCIPHER |
| select CRYPTO_CTR |
| select CRYPTO_SHA1 |
| select CRYPTO_SHA256 |
| select CRYPTO_SHA512 |
| select CRYPTO_HMAC |
| help |
| This driver allows you to utilize the hardware crypto accelerator |
| EIP97 which can be found on the MT7623 MT2701, MT8521p, etc .... |
| Select this if you want to use it for AES/SHA1/SHA2 algorithms. |
| |
| source "drivers/crypto/chelsio/Kconfig" |
| |
| source "drivers/crypto/virtio/Kconfig" |
| |
| config CRYPTO_DEV_BCM_SPU |
| tristate "Broadcom symmetric crypto/hash acceleration support" |
| depends on ARCH_BCM_IPROC |
| depends on MAILBOX |
| default m |
| select CRYPTO_AUTHENC |
| select CRYPTO_LIB_DES |
| select CRYPTO_MD5 |
| select CRYPTO_SHA1 |
| select CRYPTO_SHA256 |
| select CRYPTO_SHA512 |
| help |
| This driver provides support for Broadcom crypto acceleration using the |
| Secure Processing Unit (SPU). The SPU driver registers ablkcipher, |
| ahash, and aead algorithms with the kernel cryptographic API. |
| |
| source "drivers/crypto/stm32/Kconfig" |
| |
| config CRYPTO_DEV_SAFEXCEL |
| tristate "Inside Secure's SafeXcel cryptographic engine driver" |
| depends on OF |
| depends on (ARM64 && ARCH_MVEBU) || (COMPILE_TEST && 64BIT) |
| select CRYPTO_LIB_AES |
| select CRYPTO_AUTHENC |
| select CRYPTO_BLKCIPHER |
| select CRYPTO_LIB_DES |
| select CRYPTO_HASH |
| select CRYPTO_HMAC |
| select CRYPTO_MD5 |
| select CRYPTO_SHA1 |
| select CRYPTO_SHA256 |
| select CRYPTO_SHA512 |
| help |
| This driver interfaces with the SafeXcel EIP-197 cryptographic engine |
| designed by Inside Secure. Select this if you want to use CBC/ECB |
| chain mode, AES cipher mode and SHA1/SHA224/SHA256/SHA512 hash |
| algorithms. |
| |
| config CRYPTO_DEV_ARTPEC6 |
| tristate "Support for Axis ARTPEC-6/7 hardware crypto acceleration." |
| depends on ARM && (ARCH_ARTPEC || COMPILE_TEST) |
| depends on OF |
| select CRYPTO_AEAD |
| select CRYPTO_AES |
| select CRYPTO_ALGAPI |
| select CRYPTO_BLKCIPHER |
| select CRYPTO_CTR |
| select CRYPTO_HASH |
| select CRYPTO_SHA1 |
| select CRYPTO_SHA256 |
| select CRYPTO_SHA512 |
| help |
| Enables the driver for the on-chip crypto accelerator |
| of Axis ARTPEC SoCs. |
| |
| To compile this driver as a module, choose M here. |
| |
| config CRYPTO_DEV_CCREE |
| tristate "Support for ARM TrustZone CryptoCell family of security processors" |
| depends on CRYPTO && CRYPTO_HW && OF && HAS_DMA |
| default n |
| select CRYPTO_HASH |
| select CRYPTO_BLKCIPHER |
| select CRYPTO_LIB_DES |
| select CRYPTO_AEAD |
| select CRYPTO_AUTHENC |
| select CRYPTO_SHA1 |
| select CRYPTO_MD5 |
| select CRYPTO_SHA256 |
| select CRYPTO_SHA512 |
| select CRYPTO_HMAC |
| select CRYPTO_AES |
| select CRYPTO_CBC |
| select CRYPTO_ECB |
| select CRYPTO_CTR |
| select CRYPTO_XTS |
| select CRYPTO_SM4 |
| select CRYPTO_SM3 |
| help |
| Say 'Y' to enable a driver for the REE interface of the Arm |
| TrustZone CryptoCell family of processors. Currently the |
| CryptoCell 713, 703, 712, 710 and 630 are supported. |
| Choose this if you wish to use hardware acceleration of |
| cryptographic operations on the system REE. |
| If unsure say Y. |
| |
| source "drivers/crypto/hisilicon/Kconfig" |
| |
| endif # CRYPTO_HW |