phylib: rename reset-(post-)delay-us to reset-(de)assert-us
As suggested by Rob Herring [1] rename the previously introduced
reset-{,post-}delay-us bindings to the clearer reset-{,de}assert-us
[1] https://patchwork.kernel.org/patch/10104905/
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt
index 72860ce..d2169a5 100644
--- a/Documentation/devicetree/bindings/net/phy.txt
+++ b/Documentation/devicetree/bindings/net/phy.txt
@@ -55,10 +55,10 @@
- reset-gpios: The GPIO phandle and specifier for the PHY reset signal.
-- reset-delay-us: Delay after the reset was asserted in microseconds.
+- reset-assert-us: Delay after the reset was asserted in microseconds.
If this property is missing the delay will be skipped.
-- reset-post-delay-us: Delay after the reset was deasserted in microseconds.
+- reset-deassert-us: Delay after the reset was deasserted in microseconds.
If this property is missing the delay will be skipped.
Example:
@@ -70,6 +70,6 @@
reg = <0>;
reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
- reset-delay-us = <1000>;
- reset-post-delay-us = <2000>;
+ reset-assert-us = <1000>;
+ reset-deassert-us = <2000>;
};
diff --git a/drivers/net/phy/mdio_device.c b/drivers/net/phy/mdio_device.c
index 843c1dd..c924700 100644
--- a/drivers/net/phy/mdio_device.c
+++ b/drivers/net/phy/mdio_device.c
@@ -126,7 +126,7 @@ void mdio_device_reset(struct mdio_device *mdiodev, int value)
gpiod_set_value(mdiodev->reset, value);
- d = value ? mdiodev->reset_delay : mdiodev->reset_post_delay;
+ d = value ? mdiodev->reset_assert_delay : mdiodev->reset_deassert_delay;
if (d)
usleep_range(d, d + max_t(unsigned int, d / 10, 100));
}
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index f4c7329..1b9ef35 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -77,9 +77,10 @@ static int of_mdiobus_register_phy(struct mii_bus *mdio,
if (of_property_read_bool(child, "broken-turn-around"))
mdio->phy_ignore_ta_mask |= 1 << addr;
- of_property_read_u32(child, "reset-delay-us", &phy->mdio.reset_delay);
- of_property_read_u32(child, "reset-post-delay-us",
- &phy->mdio.reset_post_delay);
+ of_property_read_u32(child, "reset-assert-us",
+ &phy->mdio.reset_assert_delay);
+ of_property_read_u32(child, "reset-deassert-us",
+ &phy->mdio.reset_deassert_delay);
/* Associate the OF node with the device structure so it
* can be looked up later */
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
index e37c21d..268aad4 100644
--- a/include/linux/mdio.h
+++ b/include/linux/mdio.h
@@ -41,8 +41,8 @@ struct mdio_device {
int addr;
int flags;
struct gpio_desc *reset;
- unsigned int reset_delay;
- unsigned int reset_post_delay;
+ unsigned int reset_assert_delay;
+ unsigned int reset_deassert_delay;
};
#define to_mdio_device(d) container_of(d, struct mdio_device, dev)