mlxsw: spectrum: Create PVID vPort before registering netdevice
After registering a netdevice it's possible for user space applications
to configure an IP address on it. From the driver's perspective, this
means a router interface (RIF) should be created for the PVID vPort.
Therefore, we must create the PVID vPort before registering the
netdevice.
Fixes: 99724c18fc66 ("mlxsw: spectrum: Introduce support for router interfaces")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
index a1ad5e6..b5e864d 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
@@ -997,13 +997,13 @@
}
static int __mlxsw_sp_port_vlans_del(struct mlxsw_sp_port *mlxsw_sp_port,
- u16 vid_begin, u16 vid_end, bool init)
+ u16 vid_begin, u16 vid_end)
{
struct net_device *dev = mlxsw_sp_port->dev;
u16 vid, pvid;
int err;
- if (!init && !mlxsw_sp_port->bridged)
+ if (!mlxsw_sp_port->bridged)
return -EINVAL;
err = __mlxsw_sp_port_vlans_set(mlxsw_sp_port, vid_begin, vid_end,
@@ -1014,9 +1014,6 @@
return err;
}
- if (init)
- goto out;
-
pvid = mlxsw_sp_port->pvid;
if (pvid >= vid_begin && pvid <= vid_end) {
err = mlxsw_sp_port_pvid_set(mlxsw_sp_port, 0);
@@ -1028,7 +1025,6 @@
mlxsw_sp_port_fid_leave(mlxsw_sp_port, vid_begin, vid_end);
-out:
/* Changing activity bits only if HW operation succeded */
for (vid = vid_begin; vid <= vid_end; vid++)
clear_bit(vid, mlxsw_sp_port->active_vlans);
@@ -1039,8 +1035,8 @@
static int mlxsw_sp_port_vlans_del(struct mlxsw_sp_port *mlxsw_sp_port,
const struct switchdev_obj_port_vlan *vlan)
{
- return __mlxsw_sp_port_vlans_del(mlxsw_sp_port,
- vlan->vid_begin, vlan->vid_end, false);
+ return __mlxsw_sp_port_vlans_del(mlxsw_sp_port, vlan->vid_begin,
+ vlan->vid_end);
}
void mlxsw_sp_port_active_vlans_del(struct mlxsw_sp_port *mlxsw_sp_port)
@@ -1048,7 +1044,7 @@
u16 vid;
for_each_set_bit(vid, mlxsw_sp_port->active_vlans, VLAN_N_VID)
- __mlxsw_sp_port_vlans_del(mlxsw_sp_port, vid, vid, false);
+ __mlxsw_sp_port_vlans_del(mlxsw_sp_port, vid, vid);
}
static int
@@ -1546,32 +1542,6 @@
mlxsw_sp_fdb_fini(mlxsw_sp);
}
-int mlxsw_sp_port_vlan_init(struct mlxsw_sp_port *mlxsw_sp_port)
-{
- struct net_device *dev = mlxsw_sp_port->dev;
- int err;
-
- /* Allow only untagged packets to ingress and tag them internally
- * with VID 1.
- */
- mlxsw_sp_port->pvid = 1;
- err = __mlxsw_sp_port_vlans_del(mlxsw_sp_port, 0, VLAN_N_VID - 1,
- true);
- if (err) {
- netdev_err(dev, "Unable to init VLANs\n");
- return err;
- }
-
- /* Add implicit VLAN interface in the device, so that untagged
- * packets will be classified to the default vFID.
- */
- err = mlxsw_sp_port_add_vid(dev, 0, 1);
- if (err)
- netdev_err(dev, "Failed to configure default vFID\n");
-
- return err;
-}
-
void mlxsw_sp_port_switchdev_init(struct mlxsw_sp_port *mlxsw_sp_port)
{
mlxsw_sp_port->dev->switchdev_ops = &mlxsw_sp_port_switchdev_ops;