rapidio: add IDT CPS/TSI switches
Extentions to RapidIO switch support:
1. modify switch route operation declarations to allow using single
switch-specific file for family of switches that share the same route
table operations.
2. add standard route table operations for switches that that support
route table manipulation registers as defined in the Rev.1.3 of RapidIO
specification.
3. add clear-route-table operation for switches
4. add CPSxx and TSIxxx families of RapidIO switches
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Tested-by: Thomas Moll <thomas.moll@sysgo.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/include/linux/rio.h b/include/linux/rio.h
index dc0c755..29d9899 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -213,6 +213,7 @@
* @route_table: Copy of switch routing table
* @add_entry: Callback for switch-specific route add function
* @get_entry: Callback for switch-specific route get function
+ * @clr_table: Callback for switch-specific clear route table function
*/
struct rio_switch {
struct list_head node;
@@ -224,6 +225,8 @@
u16 table, u16 route_destid, u8 route_port);
int (*get_entry) (struct rio_mport * mport, u16 destid, u8 hopcount,
u16 table, u16 route_destid, u8 * route_port);
+ int (*clr_table) (struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table);
};
/* Low-level architecture-dependent routines */
@@ -307,6 +310,7 @@
* @did: RIO device ID
* @add_hook: Callback that adds a route entry
* @get_hook: Callback that gets a route entry
+ * @clr_hook: Callback that clears a switch route table (may be NULL)
*
* Defines the operations that are necessary to manipulate the route
* tables for a particular RIO switch device.
@@ -317,6 +321,8 @@
u16 table, u16 route_destid, u8 route_port);
int (*get_hook) (struct rio_mport * mport, u16 destid, u8 hopcount,
u16 table, u16 route_destid, u8 * route_port);
+ int (*clr_hook) (struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table);
};
/* Architecture and hardware-specific functions */
diff --git a/include/linux/rio_ids.h b/include/linux/rio_ids.h
index 919d4e0..db50e1c 100644
--- a/include/linux/rio_ids.h
+++ b/include/linux/rio_ids.h
@@ -20,5 +20,19 @@
#define RIO_VID_TUNDRA 0x000d
#define RIO_DID_TSI500 0x0500
+#define RIO_DID_TSI568 0x0568
+#define RIO_DID_TSI572 0x0572
+#define RIO_DID_TSI574 0x0574
+#define RIO_DID_TSI576 0x0578 /* Same ID as Tsi578 */
+#define RIO_DID_TSI577 0x0577
+#define RIO_DID_TSI578 0x0578
+
+#define RIO_VID_IDT 0x0038
+#define RIO_DID_IDT70K200 0x0310
+#define RIO_DID_IDTCPS8 0x035c
+#define RIO_DID_IDTCPS12 0x035d
+#define RIO_DID_IDTCPS16 0x035b
+#define RIO_DID_IDTCPS6Q 0x035f
+#define RIO_DID_IDTCPS10Q 0x035e
#endif /* LINUX_RIO_IDS_H */
diff --git a/include/linux/rio_regs.h b/include/linux/rio_regs.h
index 326540f..4bfb0dc 100644
--- a/include/linux/rio_regs.h
+++ b/include/linux/rio_regs.h
@@ -39,6 +39,8 @@
#define RIO_PEF_INB_MBOX2 0x00200000 /* [II] Mailbox 2 */
#define RIO_PEF_INB_MBOX3 0x00100000 /* [II] Mailbox 3 */
#define RIO_PEF_INB_DOORBELL 0x00080000 /* [II] Doorbells */
+#define RIO_PEF_EXT_RT 0x00000200 /* [III, 1.3] Extended route table support */
+#define RIO_PEF_STD_RT 0x00000100 /* [III, 1.3] Standard route table support */
#define RIO_PEF_CTLS 0x00000010 /* [III] CTLS */
#define RIO_PEF_EXT_FEATURES 0x00000008 /* [I] EFT_PTR valid */
#define RIO_PEF_ADDR_66 0x00000004 /* [I] 66 bits */
@@ -91,7 +93,10 @@
#define RIO_OPS_ATOMIC_CLR 0x00000010 /* [I] Atomic clr op */
#define RIO_OPS_PORT_WRITE 0x00000004 /* [I] Port-write op */
- /* 0x20-0x3c *//* Reserved */
+ /* 0x20-0x30 *//* Reserved */
+
+#define RIO_SWITCH_RT_LIMIT 0x34 /* [III, 1.3] Switch Route Table Destination ID Limit CAR */
+#define RIO_RT_MAX_DESTID 0x0000ffff
#define RIO_MBOX_CSR 0x40 /* [II] Mailbox CSR */
#define RIO_MBOX0_AVAIL 0x80000000 /* [II] Mbox 0 avail */
@@ -153,7 +158,11 @@
#define RIO_HOST_DID_LOCK_CSR 0x68 /* [III] Host Base Device ID Lock CSR */
#define RIO_COMPONENT_TAG_CSR 0x6c /* [III] Component Tag CSR */
- /* 0x70-0xf8 *//* Reserved */
+#define RIO_STD_RTE_CONF_DESTID_SEL_CSR 0x70
+#define RIO_STD_RTE_CONF_PORT_SEL_CSR 0x74
+#define RIO_STD_RTE_DEFAULT_PORT 0x78
+
+ /* 0x7c-0xf8 *//* Reserved */
/* 0x100-0xfff8 *//* [I] Extended Features Space */
/* 0x10000-0xfffff8 *//* [I] Implementation-defined Space */
@@ -186,6 +195,7 @@
#define RIO_EFB_SER_EP_ID 0x0004 /* [VI] LP/Serial EP Devices */
#define RIO_EFB_SER_EP_REC_ID 0x0005 /* [VI] LP/Serial EP Recovery Devices */
#define RIO_EFB_SER_EP_FREE_ID 0x0006 /* [VI] LP/Serial EP Free Devices */
+#define RIO_EFB_SER_EP_FREC_ID 0x0009 /* [VI] LP/Serial EP Free Recovery Devices */
/*
* Physical 8/16 LP-LVDS