ath10k: add register access debugfs interface
Debugfs files reg_addr and reg_val are used for reading and writing to the
firmware (target) registers. reg_addr contains the address to be accessed,
which also needs to be set first, and reg_value is when used for reading and
writing the actual value in ASCII.
To read a value from the firmware register 0x100000:
# echo 0x100000 > reg_addr
# cat reg_value
0x00100000:0x000002d3
To write value 0x2400 to address 0x100000:
# echo 0x100000 > reg_addr
# echo 0x2400 > reg_value
#
Signed-off-by: Yanbo Li <yanbol@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index f10721d..d0397d1 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -928,6 +928,125 @@
.llseek = default_llseek,
};
+static ssize_t ath10k_reg_addr_read(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath10k *ar = file->private_data;
+ u8 buf[32];
+ unsigned int len = 0;
+ u32 reg_addr;
+
+ mutex_lock(&ar->conf_mutex);
+ reg_addr = ar->debug.reg_addr;
+ mutex_unlock(&ar->conf_mutex);
+
+ len += scnprintf(buf + len, sizeof(buf) - len, "0x%x\n", reg_addr);
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t ath10k_reg_addr_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath10k *ar = file->private_data;
+ u32 reg_addr;
+ int ret;
+
+ ret = kstrtou32_from_user(user_buf, count, 0, ®_addr);
+ if (ret)
+ return ret;
+
+ if (!IS_ALIGNED(reg_addr, 4))
+ return -EFAULT;
+
+ mutex_lock(&ar->conf_mutex);
+ ar->debug.reg_addr = reg_addr;
+ mutex_unlock(&ar->conf_mutex);
+
+ return count;
+}
+
+static const struct file_operations fops_reg_addr = {
+ .read = ath10k_reg_addr_read,
+ .write = ath10k_reg_addr_write,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+static ssize_t ath10k_reg_value_read(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath10k *ar = file->private_data;
+ u8 buf[48];
+ unsigned int len;
+ u32 reg_addr, reg_val;
+ int ret;
+
+ mutex_lock(&ar->conf_mutex);
+
+ if (ar->state != ATH10K_STATE_ON &&
+ ar->state != ATH10K_STATE_UTF) {
+ ret = -ENETDOWN;
+ goto exit;
+ }
+
+ reg_addr = ar->debug.reg_addr;
+
+ reg_val = ath10k_hif_read32(ar, reg_addr);
+ len = scnprintf(buf, sizeof(buf), "0x%08x:0x%08x\n", reg_addr, reg_val);
+
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+
+exit:
+ mutex_unlock(&ar->conf_mutex);
+
+ return ret;
+}
+
+static ssize_t ath10k_reg_value_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath10k *ar = file->private_data;
+ u32 reg_addr, reg_val;
+ int ret;
+
+ mutex_lock(&ar->conf_mutex);
+
+ if (ar->state != ATH10K_STATE_ON &&
+ ar->state != ATH10K_STATE_UTF) {
+ ret = -ENETDOWN;
+ goto exit;
+ }
+
+ reg_addr = ar->debug.reg_addr;
+
+ ret = kstrtou32_from_user(user_buf, count, 0, ®_val);
+ if (ret)
+ goto exit;
+
+ ath10k_hif_write32(ar, reg_addr, reg_val);
+
+ ret = count;
+
+exit:
+ mutex_unlock(&ar->conf_mutex);
+
+ return ret;
+}
+
+static const struct file_operations fops_reg_value = {
+ .read = ath10k_reg_value_read,
+ .write = ath10k_reg_value_write,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
static int ath10k_debug_htt_stats_req(struct ath10k *ar)
{
u64 cookie;
@@ -1629,6 +1748,12 @@
debugfs_create_file("fw_crash_dump", S_IRUSR, ar->debug.debugfs_phy,
ar, &fops_fw_crash_dump);
+ debugfs_create_file("reg_addr", S_IRUSR | S_IWUSR,
+ ar->debug.debugfs_phy, ar, &fops_reg_addr);
+
+ debugfs_create_file("reg_value", S_IRUSR | S_IWUSR,
+ ar->debug.debugfs_phy, ar, &fops_reg_value);
+
debugfs_create_file("chip_id", S_IRUSR, ar->debug.debugfs_phy,
ar, &fops_chip_id);