| /* Linux driver for NAND Flash Translation Layer */ |
| /* (c) 1999 Machine Vision Holdings, Inc. */ |
| /* Author: David Woodhouse <dwmw2@infradead.org> */ |
| |
| /* |
| The contents of this file are distributed under the GNU General |
| Public License version 2. The author places no additional |
| restrictions of any kind on it. |
| */ |
| |
| #define PRERELEASE |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <asm/errno.h> |
| #include <asm/io.h> |
| #include <asm/uaccess.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/hdreg.h> |
| #include <linux/blkdev.h> |
| |
| #include <linux/kmod.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/nand.h> |
| #include <linux/mtd/nftl.h> |
| #include <linux/mtd/blktrans.h> |
| |
| /* maximum number of loops while examining next block, to have a |
| chance to detect consistency problems (they should never happen |
| because of the checks done in the mounting */ |
| |
| #define MAX_LOOPS 10000 |
| |
| |
| static void nftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd) |
| { |
| struct NFTLrecord *nftl; |
| unsigned long temp; |
| |
| if (mtd->type != MTD_NANDFLASH || mtd->size > UINT_MAX) |
| return; |
| /* OK, this is moderately ugly. But probably safe. Alternatives? */ |
| if (memcmp(mtd->name, "DiskOnChip", 10)) |
| return; |
| |
| if (!mtd->block_isbad) { |
| printk(KERN_ERR |
| "NFTL no longer supports the old DiskOnChip drivers loaded via docprobe.\n" |
| "Please use the new diskonchip driver under the NAND subsystem.\n"); |
| return; |
| } |
| |
| DEBUG(MTD_DEBUG_LEVEL1, "NFTL: add_mtd for %s\n", mtd->name); |
| |
| nftl = kzalloc(sizeof(struct NFTLrecord), GFP_KERNEL); |
| |
| if (!nftl) { |
| printk(KERN_WARNING "NFTL: out of memory for data structures\n"); |
| return; |
| } |
| |
| nftl->mbd.mtd = mtd; |
| nftl->mbd.devnum = -1; |
| |
| nftl->mbd.tr = tr; |
| |
| if (NFTL_mount(nftl) < 0) { |
| printk(KERN_WARNING "NFTL: could not mount device\n"); |
| kfree(nftl); |
| return; |
| } |
| |
| /* OK, it's a new one. Set up all the data structures. */ |
| |
| /* Calculate geometry */ |
| nftl->cylinders = 1024; |
| nftl->heads = 16; |
| |
| temp = nftl->cylinders * nftl->heads; |
| nftl->sectors = nftl->mbd.size / temp; |
| if (nftl->mbd.size % temp) { |
| nftl->sectors++; |
| temp = nftl->cylinders * nftl->sectors; |
| nftl->heads = nftl->mbd.size / temp; |
| |
| if (nftl->mbd.size % temp) { |
| nftl->heads++; |
| temp = nftl->heads * nftl->sectors; |
| nftl->cylinders = nftl->mbd.size / temp; |
| } |
| } |
| |
| if (nftl->mbd.size != nftl->heads * nftl->cylinders * nftl->sectors) { |
| /* |
| Oh no we don't have |
| mbd.size == heads * cylinders * sectors |
| */ |
| printk(KERN_WARNING "NFTL: cannot calculate a geometry to " |
| "match size of 0x%lx.\n", nftl->mbd.size); |
| printk(KERN_WARNING "NFTL: using C:%d H:%d S:%d " |
| "(== 0x%lx sects)\n", |
| nftl->cylinders, nftl->heads , nftl->sectors, |
| (long)nftl->cylinders * (long)nftl->heads * |
| (long)nftl->sectors ); |
| } |
| |
| if (add_mtd_blktrans_dev(&nftl->mbd)) { |
| kfree(nftl->ReplUnitTable); |
| kfree(nftl->EUNtable); |
| kfree(nftl); |
| return; |
| } |
| #ifdef PSYCHO_DEBUG |
| printk(KERN_INFO "NFTL: Found new nftl%c\n", nftl->mbd.devnum + 'a'); |
| #endif |
| } |
| |
| static void nftl_remove_dev(struct mtd_blktrans_dev *dev) |
| { |
| struct NFTLrecord *nftl = (void *)dev; |
| |
| DEBUG(MTD_DEBUG_LEVEL1, "NFTL: remove_dev (i=%d)\n", dev->devnum); |
| |
| del_mtd_blktrans_dev(dev); |
| kfree(nftl->ReplUnitTable); |
| kfree(nftl->EUNtable); |
| kfree(nftl); |
| } |
| |
| /* |
| * Read oob data from flash |
| */ |
| int nftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len, |
| size_t *retlen, uint8_t *buf) |
| { |
| struct mtd_oob_ops ops; |
| int res; |
| |
| ops.mode = MTD_OOB_PLACE; |
| ops.ooboffs = offs & (mtd->writesize - 1); |
| ops.ooblen = len; |
| ops.oobbuf = buf; |
| ops.datbuf = NULL; |
| |
| res = mtd->read_oob(mtd, offs & ~(mtd->writesize - 1), &ops); |
| *retlen = ops.oobretlen; |
| return res; |
| } |
| |
| /* |
| * Write oob data to flash |
| */ |
| int nftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len, |
| size_t *retlen, uint8_t *buf) |
| { |
| struct mtd_oob_ops ops; |
| int res; |
| |
| ops.mode = MTD_OOB_PLACE; |
| ops.ooboffs = offs & (mtd->writesize - 1); |
| ops.ooblen = len; |
| ops.oobbuf = buf; |
| ops.datbuf = NULL; |
| |
| res = mtd->write_oob(mtd, offs & ~(mtd->writesize - 1), &ops); |
| *retlen = ops.oobretlen; |
| return res; |
| } |
| |
| #ifdef CONFIG_NFTL_RW |
| |
| /* |
| * Write data and oob to flash |
| */ |
| static int nftl_write(struct mtd_info *mtd, loff_t offs, size_t len, |
| size_t *retlen, uint8_t *buf, uint8_t *oob) |
| { |
| struct mtd_oob_ops ops; |
| int res; |
| |
| ops.mode = MTD_OOB_PLACE; |
| ops.ooboffs = offs; |
| ops.ooblen = mtd->oobsize; |
| ops.oobbuf = oob; |
| ops.datbuf = buf; |
| ops.len = len; |
| |
| res = mtd->write_oob(mtd, offs & ~(mtd->writesize - 1), &ops); |
| *retlen = ops.retlen; |
| return res; |
| } |
| |
| /* Actual NFTL access routines */ |
| /* NFTL_findfreeblock: Find a free Erase Unit on the NFTL partition. This function is used |
| * when the give Virtual Unit Chain |
| */ |
| static u16 NFTL_findfreeblock(struct NFTLrecord *nftl, int desperate ) |
| { |
| /* For a given Virtual Unit Chain: find or create a free block and |
| add it to the chain */ |
| /* We're passed the number of the last EUN in the chain, to save us from |
| having to look it up again */ |
| u16 pot = nftl->LastFreeEUN; |
| int silly = nftl->nb_blocks; |
| |
| /* Normally, we force a fold to happen before we run out of free blocks completely */ |
| if (!desperate && nftl->numfreeEUNs < 2) { |
| DEBUG(MTD_DEBUG_LEVEL1, "NFTL_findfreeblock: there are too few free EUNs\n"); |
| return 0xffff; |
| } |
| |
| /* Scan for a free block */ |
| do { |
| if (nftl->ReplUnitTable[pot] == BLOCK_FREE) { |
| nftl->LastFreeEUN = pot; |
| nftl->numfreeEUNs--; |
| return pot; |
| } |
| |
| /* This will probably point to the MediaHdr unit itself, |
| right at the beginning of the partition. But that unit |
| (and the backup unit too) should have the UCI set |
| up so that it's not selected for overwriting */ |
| if (++pot > nftl->lastEUN) |
| pot = le16_to_cpu(nftl->MediaHdr.FirstPhysicalEUN); |
| |
| if (!silly--) { |
| printk("Argh! No free blocks found! LastFreeEUN = %d, " |
| "FirstEUN = %d\n", nftl->LastFreeEUN, |
| le16_to_cpu(nftl->MediaHdr.FirstPhysicalEUN)); |
| return 0xffff; |
| } |
| } while (pot != nftl->LastFreeEUN); |
| |
| return 0xffff; |
| } |
| |
| static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned pendingblock ) |
| { |
| struct mtd_info *mtd = nftl->mbd.mtd; |
| u16 BlockMap[MAX_SECTORS_PER_UNIT]; |
| unsigned char BlockLastState[MAX_SECTORS_PER_UNIT]; |
| unsigned char BlockFreeFound[MAX_SECTORS_PER_UNIT]; |
| unsigned int thisEUN; |
| int block; |
| int silly; |
| unsigned int targetEUN; |
| struct nftl_oob oob; |
| int inplace = 1; |
| size_t retlen; |
| |
| memset(BlockMap, 0xff, sizeof(BlockMap)); |
| memset(BlockFreeFound, 0, sizeof(BlockFreeFound)); |
| |
| thisEUN = nftl->EUNtable[thisVUC]; |
| |
| if (thisEUN == BLOCK_NIL) { |
| printk(KERN_WARNING "Trying to fold non-existent " |
| "Virtual Unit Chain %d!\n", thisVUC); |
| return BLOCK_NIL; |
| } |
| |
| /* Scan to find the Erase Unit which holds the actual data for each |
| 512-byte block within the Chain. |
| */ |
| silly = MAX_LOOPS; |
| targetEUN = BLOCK_NIL; |
| while (thisEUN <= nftl->lastEUN ) { |
| unsigned int status, foldmark; |
| |
| targetEUN = thisEUN; |
| for (block = 0; block < nftl->EraseSize / 512; block ++) { |
| nftl_read_oob(mtd, (thisEUN * nftl->EraseSize) + |
| (block * 512), 16 , &retlen, |
| (char *)&oob); |
| if (block == 2) { |
| foldmark = oob.u.c.FoldMark | oob.u.c.FoldMark1; |
| if (foldmark == FOLD_MARK_IN_PROGRESS) { |
| DEBUG(MTD_DEBUG_LEVEL1, |
| "Write Inhibited on EUN %d\n", thisEUN); |
| inplace = 0; |
| } else { |
| /* There's no other reason not to do inplace, |
| except ones that come later. So we don't need |
| to preserve inplace */ |
| inplace = 1; |
| } |
| } |
| status = oob.b.Status | oob.b.Status1; |
| BlockLastState[block] = status; |
| |
| switch(status) { |
| case SECTOR_FREE: |
| BlockFreeFound[block] = 1; |
| break; |
| |
| case SECTOR_USED: |
| if (!BlockFreeFound[block]) |
| BlockMap[block] = thisEUN; |
| else |
| printk(KERN_WARNING |
| "SECTOR_USED found after SECTOR_FREE " |
| "in Virtual Unit Chain %d for block %d\n", |
| thisVUC, block); |
| break; |
| case SECTOR_DELETED: |
| if (!BlockFreeFound[block]) |
| BlockMap[block] = BLOCK_NIL; |
| else |
| printk(KERN_WARNING |
| "SECTOR_DELETED found after SECTOR_FREE " |
| "in Virtual Unit Chain %d for block %d\n", |
| thisVUC, block); |
| break; |
| |
| case SECTOR_IGNORE: |
| break; |
| default: |
| printk("Unknown status for block %d in EUN %d: %x\n", |
| block, thisEUN, status); |
| } |
| } |
| |
| if (!silly--) { |
| printk(KERN_WARNING "Infinite loop in Virtual Unit Chain 0x%x\n", |
| thisVUC); |
| return BLOCK_NIL; |
| } |
| |
| thisEUN = nftl->ReplUnitTable[thisEUN]; |
| } |
| |
| if (inplace) { |
| /* We're being asked to be a fold-in-place. Check |
| that all blocks which actually have data associated |
| with them (i.e. BlockMap[block] != BLOCK_NIL) are |
| either already present or SECTOR_FREE in the target |
| block. If not, we're going to have to fold out-of-place |
| anyway. |
| */ |
| for (block = 0; block < nftl->EraseSize / 512 ; block++) { |
| if (BlockLastState[block] != SECTOR_FREE && |
| BlockMap[block] != BLOCK_NIL && |
| BlockMap[block] != targetEUN) { |
| DEBUG(MTD_DEBUG_LEVEL1, "Setting inplace to 0. VUC %d, " |
| "block %d was %x lastEUN, " |
| "and is in EUN %d (%s) %d\n", |
| thisVUC, block, BlockLastState[block], |
| BlockMap[block], |
| BlockMap[block]== targetEUN ? "==" : "!=", |
| targetEUN); |
| inplace = 0; |
| break; |
| } |
| } |
| |
| if (pendingblock >= (thisVUC * (nftl->EraseSize / 512)) && |
| pendingblock < ((thisVUC + 1)* (nftl->EraseSize / 512)) && |
| BlockLastState[pendingblock - (thisVUC * (nftl->EraseSize / 512))] != |
| SECTOR_FREE) { |
| DEBUG(MTD_DEBUG_LEVEL1, "Pending write not free in EUN %d. " |
| "Folding out of place.\n", targetEUN); |
| inplace = 0; |
| } |
| } |
| |
| if (!inplace) { |
| DEBUG(MTD_DEBUG_LEVEL1, "Cannot fold Virtual Unit Chain %d in place. " |
| "Trying out-of-place\n", thisVUC); |
| /* We need to find a targetEUN to fold into. */ |
| targetEUN = NFTL_findfreeblock(nftl, 1); |
| if (targetEUN == BLOCK_NIL) { |
| /* Ouch. Now we're screwed. We need to do a |
| fold-in-place of another chain to make room |
| for this one. We need a better way of selecting |
| which chain to fold, because makefreeblock will |
| only ask us to fold the same one again. |
| */ |
| printk(KERN_WARNING |
| "NFTL_findfreeblock(desperate) returns 0xffff.\n"); |
| return BLOCK_NIL; |
| } |
| } else { |
| /* We put a fold mark in the chain we are folding only if we |
| fold in place to help the mount check code. If we do not fold in |
| place, it is possible to find the valid chain by selecting the |
| longer one */ |
| oob.u.c.FoldMark = oob.u.c.FoldMark1 = cpu_to_le16(FOLD_MARK_IN_PROGRESS); |
| oob.u.c.unused = 0xffffffff; |
| nftl_write_oob(mtd, (nftl->EraseSize * targetEUN) + 2 * 512 + 8, |
| 8, &retlen, (char *)&oob.u); |
| } |
| |
| /* OK. We now know the location of every block in the Virtual Unit Chain, |
| and the Erase Unit into which we are supposed to be copying. |
| Go for it. |
| */ |
| DEBUG(MTD_DEBUG_LEVEL1,"Folding chain %d into unit %d\n", thisVUC, targetEUN); |
| for (block = 0; block < nftl->EraseSize / 512 ; block++) { |
| unsigned char movebuf[512]; |
| int ret; |
| |
| /* If it's in the target EUN already, or if it's pending write, do nothing */ |
| if (BlockMap[block] == targetEUN || |
| (pendingblock == (thisVUC * (nftl->EraseSize / 512) + block))) { |
| continue; |
| } |
| |
| /* copy only in non free block (free blocks can only |
| happen in case of media errors or deleted blocks) */ |
| if (BlockMap[block] == BLOCK_NIL) |
| continue; |
| |
| ret = mtd->read(mtd, (nftl->EraseSize * BlockMap[block]) + (block * 512), |
| 512, &retlen, movebuf); |
| if (ret < 0 && ret != -EUCLEAN) { |
| ret = mtd->read(mtd, (nftl->EraseSize * BlockMap[block]) |
| + (block * 512), 512, &retlen, |
| movebuf); |
| if (ret != -EIO) |
| printk("Error went away on retry.\n"); |
| } |
| memset(&oob, 0xff, sizeof(struct nftl_oob)); |
| oob.b.Status = oob.b.Status1 = SECTOR_USED; |
| |
| nftl_write(nftl->mbd.mtd, (nftl->EraseSize * targetEUN) + |
| (block * 512), 512, &retlen, movebuf, (char *)&oob); |
| } |
| |
| /* add the header so that it is now a valid chain */ |
| oob.u.a.VirtUnitNum = oob.u.a.SpareVirtUnitNum = cpu_to_le16(thisVUC); |
| oob.u.a.ReplUnitNum = oob.u.a.SpareReplUnitNum = 0xffff; |
| |
| nftl_write_oob(mtd, (nftl->EraseSize * targetEUN) + 8, |
| 8, &retlen, (char *)&oob.u); |
| |
| /* OK. We've moved the whole lot into the new block. Now we have to free the original blocks. */ |
| |
| /* At this point, we have two different chains for this Virtual Unit, and no way to tell |
| them apart. If we crash now, we get confused. However, both contain the same data, so we |
| shouldn't actually lose data in this case. It's just that when we load up on a medium which |
| has duplicate chains, we need to free one of the chains because it's not necessary any more. |
| */ |
| thisEUN = nftl->EUNtable[thisVUC]; |
| DEBUG(MTD_DEBUG_LEVEL1,"Want to erase\n"); |
| |
| /* For each block in the old chain (except the targetEUN of course), |
| free it and make it available for future use */ |
| while (thisEUN <= nftl->lastEUN && thisEUN != targetEUN) { |
| unsigned int EUNtmp; |
| |
| EUNtmp = nftl->ReplUnitTable[thisEUN]; |
| |
| if (NFTL_formatblock(nftl, thisEUN) < 0) { |
| /* could not erase : mark block as reserved |
| */ |
| nftl->ReplUnitTable[thisEUN] = BLOCK_RESERVED; |
| } else { |
| /* correctly erased : mark it as free */ |
| nftl->ReplUnitTable[thisEUN] = BLOCK_FREE; |
| nftl->numfreeEUNs++; |
| } |
| thisEUN = EUNtmp; |
| } |
| |
| /* Make this the new start of chain for thisVUC */ |
| nftl->ReplUnitTable[targetEUN] = BLOCK_NIL; |
| nftl->EUNtable[thisVUC] = targetEUN; |
| |
| return targetEUN; |
| } |
| |
| static u16 NFTL_makefreeblock( struct NFTLrecord *nftl , unsigned pendingblock) |
| { |
| /* This is the part that needs some cleverness applied. |
| For now, I'm doing the minimum applicable to actually |
| get the thing to work. |
| Wear-levelling and other clever stuff needs to be implemented |
| and we also need to do some assessment of the results when |
| the system loses power half-way through the routine. |
| */ |
| u16 LongestChain = 0; |
| u16 ChainLength = 0, thislen; |
| u16 chain, EUN; |
| |
| for (chain = 0; chain < le32_to_cpu(nftl->MediaHdr.FormattedSize) / nftl->EraseSize; chain++) { |
| EUN = nftl->EUNtable[chain]; |
| thislen = 0; |
| |
| while (EUN <= nftl->lastEUN) { |
| thislen++; |
| //printk("VUC %d reaches len %d with EUN %d\n", chain, thislen, EUN); |
| EUN = nftl->ReplUnitTable[EUN] & 0x7fff; |
| if (thislen > 0xff00) { |
| printk("Endless loop in Virtual Chain %d: Unit %x\n", |
| chain, EUN); |
| } |
| if (thislen > 0xff10) { |
| /* Actually, don't return failure. Just ignore this chain and |
| get on with it. */ |
| thislen = 0; |
| break; |
| } |
| } |
| |
| if (thislen > ChainLength) { |
| //printk("New longest chain is %d with length %d\n", chain, thislen); |
| ChainLength = thislen; |
| LongestChain = chain; |
| } |
| } |
| |
| if (ChainLength < 2) { |
| printk(KERN_WARNING "No Virtual Unit Chains available for folding. " |
| "Failing request\n"); |
| return 0xffff; |
| } |
| |
| return NFTL_foldchain (nftl, LongestChain, pendingblock); |
| } |
| |
| /* NFTL_findwriteunit: Return the unit number into which we can write |
| for this block. Make it available if it isn't already |
| */ |
| static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block) |
| { |
| u16 lastEUN; |
| u16 thisVUC = block / (nftl->EraseSize / 512); |
| struct mtd_info *mtd = nftl->mbd.mtd; |
| unsigned int writeEUN; |
| unsigned long blockofs = (block * 512) & (nftl->EraseSize -1); |
| size_t retlen; |
| int silly, silly2 = 3; |
| struct nftl_oob oob; |
| |
| do { |
| /* Scan the media to find a unit in the VUC which has |
| a free space for the block in question. |
| */ |
| |
| /* This condition catches the 0x[7f]fff cases, as well as |
| being a sanity check for past-end-of-media access |
| */ |
| lastEUN = BLOCK_NIL; |
| writeEUN = nftl->EUNtable[thisVUC]; |
| silly = MAX_LOOPS; |
| while (writeEUN <= nftl->lastEUN) { |
| struct nftl_bci bci; |
| size_t retlen; |
| unsigned int status; |
| |
| lastEUN = writeEUN; |
| |
| nftl_read_oob(mtd, |
| (writeEUN * nftl->EraseSize) + blockofs, |
| 8, &retlen, (char *)&bci); |
| |
| DEBUG(MTD_DEBUG_LEVEL2, "Status of block %d in EUN %d is %x\n", |
| block , writeEUN, le16_to_cpu(bci.Status)); |
| |
| status = bci.Status | bci.Status1; |
| switch(status) { |
| case SECTOR_FREE: |
| return writeEUN; |
| |
| case SECTOR_DELETED: |
| case SECTOR_USED: |
| case SECTOR_IGNORE: |
| break; |
| default: |
| // Invalid block. Don't use it any more. Must implement. |
| break; |
| } |
| |
| if (!silly--) { |
| printk(KERN_WARNING |
| "Infinite loop in Virtual Unit Chain 0x%x\n", |
| thisVUC); |
| return 0xffff; |
| } |
| |
| /* Skip to next block in chain */ |
| writeEUN = nftl->ReplUnitTable[writeEUN]; |
| } |
| |
| /* OK. We didn't find one in the existing chain, or there |
| is no existing chain. */ |
| |
| /* Try to find an already-free block */ |
| writeEUN = NFTL_findfreeblock(nftl, 0); |
| |
| if (writeEUN == BLOCK_NIL) { |
| /* That didn't work - there were no free blocks just |
| waiting to be picked up. We're going to have to fold |
| a chain to make room. |
| */ |
| |
| /* First remember the start of this chain */ |
| //u16 startEUN = nftl->EUNtable[thisVUC]; |
| |
| //printk("Write to VirtualUnitChain %d, calling makefreeblock()\n", thisVUC); |
| writeEUN = NFTL_makefreeblock(nftl, 0xffff); |
| |
| if (writeEUN == BLOCK_NIL) { |
| /* OK, we accept that the above comment is |
| lying - there may have been free blocks |
| last time we called NFTL_findfreeblock(), |
| but they are reserved for when we're |
| desperate. Well, now we're desperate. |
| */ |
| DEBUG(MTD_DEBUG_LEVEL1, "Using desperate==1 to find free EUN to accommodate write to VUC %d\n", thisVUC); |
| writeEUN = NFTL_findfreeblock(nftl, 1); |
| } |
| if (writeEUN == BLOCK_NIL) { |
| /* Ouch. This should never happen - we should |
| always be able to make some room somehow. |
| If we get here, we've allocated more storage |
| space than actual media, or our makefreeblock |
| routine is missing something. |
| */ |
| printk(KERN_WARNING "Cannot make free space.\n"); |
| return BLOCK_NIL; |
| } |
| //printk("Restarting scan\n"); |
| lastEUN = BLOCK_NIL; |
| continue; |
| } |
| |
| /* We've found a free block. Insert it into the chain. */ |
| |
| if (lastEUN != BLOCK_NIL) { |
| thisVUC |= 0x8000; /* It's a replacement block */ |
| } else { |
| /* The first block in a new chain */ |
| nftl->EUNtable[thisVUC] = writeEUN; |
| } |
| |
| /* set up the actual EUN we're writing into */ |
| /* Both in our cache... */ |
| nftl->ReplUnitTable[writeEUN] = BLOCK_NIL; |
| |
| /* ... and on the flash itself */ |
| nftl_read_oob(mtd, writeEUN * nftl->EraseSize + 8, 8, |
| &retlen, (char *)&oob.u); |
| |
| oob.u.a.VirtUnitNum = oob.u.a.SpareVirtUnitNum = cpu_to_le16(thisVUC); |
| |
| nftl_write_oob(mtd, writeEUN * nftl->EraseSize + 8, 8, |
| &retlen, (char *)&oob.u); |
| |
| /* we link the new block to the chain only after the |
| block is ready. It avoids the case where the chain |
| could point to a free block */ |
| if (lastEUN != BLOCK_NIL) { |
| /* Both in our cache... */ |
| nftl->ReplUnitTable[lastEUN] = writeEUN; |
| /* ... and on the flash itself */ |
| nftl_read_oob(mtd, (lastEUN * nftl->EraseSize) + 8, |
| 8, &retlen, (char *)&oob.u); |
| |
| oob.u.a.ReplUnitNum = oob.u.a.SpareReplUnitNum |
| = cpu_to_le16(writeEUN); |
| |
| nftl_write_oob(mtd, (lastEUN * nftl->EraseSize) + 8, |
| 8, &retlen, (char *)&oob.u); |
| } |
| |
| return writeEUN; |
| |
| } while (silly2--); |
| |
| printk(KERN_WARNING "Error folding to make room for Virtual Unit Chain 0x%x\n", |
| thisVUC); |
| return 0xffff; |
| } |
| |
| static int nftl_writeblock(struct mtd_blktrans_dev *mbd, unsigned long block, |
| char *buffer) |
| { |
| struct NFTLrecord *nftl = (void *)mbd; |
| u16 writeEUN; |
| unsigned long blockofs = (block * 512) & (nftl->EraseSize - 1); |
| size_t retlen; |
| struct nftl_oob oob; |
| |
| writeEUN = NFTL_findwriteunit(nftl, block); |
| |
| if (writeEUN == BLOCK_NIL) { |
| printk(KERN_WARNING |
| "NFTL_writeblock(): Cannot find block to write to\n"); |
| /* If we _still_ haven't got a block to use, we're screwed */ |
| return 1; |
| } |
| |
| memset(&oob, 0xff, sizeof(struct nftl_oob)); |
| oob.b.Status = oob.b.Status1 = SECTOR_USED; |
| |
| nftl_write(nftl->mbd.mtd, (writeEUN * nftl->EraseSize) + blockofs, |
| 512, &retlen, (char *)buffer, (char *)&oob); |
| return 0; |
| } |
| #endif /* CONFIG_NFTL_RW */ |
| |
| static int nftl_readblock(struct mtd_blktrans_dev *mbd, unsigned long block, |
| char *buffer) |
| { |
| struct NFTLrecord *nftl = (void *)mbd; |
| struct mtd_info *mtd = nftl->mbd.mtd; |
| u16 lastgoodEUN; |
| u16 thisEUN = nftl->EUNtable[block / (nftl->EraseSize / 512)]; |
| unsigned long blockofs = (block * 512) & (nftl->EraseSize - 1); |
| unsigned int status; |
| int silly = MAX_LOOPS; |
| size_t retlen; |
| struct nftl_bci bci; |
| |
| lastgoodEUN = BLOCK_NIL; |
| |
| if (thisEUN != BLOCK_NIL) { |
| while (thisEUN < nftl->nb_blocks) { |
| if (nftl_read_oob(mtd, (thisEUN * nftl->EraseSize) + |
| blockofs, 8, &retlen, |
| (char *)&bci) < 0) |
| status = SECTOR_IGNORE; |
| else |
| status = bci.Status | bci.Status1; |
| |
| switch (status) { |
| case SECTOR_FREE: |
| /* no modification of a sector should follow a free sector */ |
| goto the_end; |
| case SECTOR_DELETED: |
| lastgoodEUN = BLOCK_NIL; |
| break; |
| case SECTOR_USED: |
| lastgoodEUN = thisEUN; |
| break; |
| case SECTOR_IGNORE: |
| break; |
| default: |
| printk("Unknown status for block %ld in EUN %d: %x\n", |
| block, thisEUN, status); |
| break; |
| } |
| |
| if (!silly--) { |
| printk(KERN_WARNING "Infinite loop in Virtual Unit Chain 0x%lx\n", |
| block / (nftl->EraseSize / 512)); |
| return 1; |
| } |
| thisEUN = nftl->ReplUnitTable[thisEUN]; |
| } |
| } |
| |
| the_end: |
| if (lastgoodEUN == BLOCK_NIL) { |
| /* the requested block is not on the media, return all 0x00 */ |
| memset(buffer, 0, 512); |
| } else { |
| loff_t ptr = (lastgoodEUN * nftl->EraseSize) + blockofs; |
| size_t retlen; |
| int res = mtd->read(mtd, ptr, 512, &retlen, buffer); |
| |
| if (res < 0 && res != -EUCLEAN) |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| static int nftl_getgeo(struct mtd_blktrans_dev *dev, struct hd_geometry *geo) |
| { |
| struct NFTLrecord *nftl = (void *)dev; |
| |
| geo->heads = nftl->heads; |
| geo->sectors = nftl->sectors; |
| geo->cylinders = nftl->cylinders; |
| |
| return 0; |
| } |
| |
| /**************************************************************************** |
| * |
| * Module stuff |
| * |
| ****************************************************************************/ |
| |
| |
| static struct mtd_blktrans_ops nftl_tr = { |
| .name = "nftl", |
| .major = NFTL_MAJOR, |
| .part_bits = NFTL_PARTN_BITS, |
| .blksize = 512, |
| .getgeo = nftl_getgeo, |
| .readsect = nftl_readblock, |
| #ifdef CONFIG_NFTL_RW |
| .writesect = nftl_writeblock, |
| #endif |
| .add_mtd = nftl_add_mtd, |
| .remove_dev = nftl_remove_dev, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int __init init_nftl(void) |
| { |
| return register_mtd_blktrans(&nftl_tr); |
| } |
| |
| static void __exit cleanup_nftl(void) |
| { |
| deregister_mtd_blktrans(&nftl_tr); |
| } |
| |
| module_init(init_nftl); |
| module_exit(cleanup_nftl); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>, Fabrice Bellard <fabrice.bellard@netgem.com> et al."); |
| MODULE_DESCRIPTION("Support code for NAND Flash Translation Layer, used on M-Systems DiskOnChip 2000 and Millennium"); |
| MODULE_ALIAS_BLOCKDEV_MAJOR(NFTL_MAJOR); |