ftrace/x86: Add separate function to save regs
Add a way to have different functions calling different trampolines.
If a ftrace_ops wants regs saved on the return, then have only the
functions with ops registered to save regs. Functions registered by
other ops would not be affected, unless the functions overlap.
If one ftrace_ops registered functions A, B and C and another ops
registered fucntions to save regs on A, and D, then only functions
A and D would be saving regs. Function B and C would work as normal.
Although A is registered by both ops: normal and saves regs; this is fine
as saving the regs is needed to satisfy one of the ops that calls it
but the regs are ignored by the other ops function.
x86_64 implements the full regs saving, and i386 just passes a NULL
for regs to satisfy the ftrace_ops passing. Where an arch must supply
both regs and ftrace_ops parameters, even if regs is just NULL.
It is OK for an arch to pass NULL regs. All function trace users that
require regs passing must add the flag FTRACE_OPS_FL_SAVE_REGS when
registering the ftrace_ops. If the arch does not support saving regs
then the ftrace_ops will fail to register. The flag
FTRACE_OPS_FL_SAVE_REGS_IF_SUPPORTED may be set that will prevent the
ftrace_ops from failing to register. In this case, the handler may
either check if regs is not NULL or check if ARCH_SUPPORTS_FTRACE_SAVE_REGS.
If the arch supports passing regs it will set this macro and pass regs
for ops that request them. All other archs will just pass NULL.
Link: Link: http://lkml.kernel.org/r/20120711195745.107705970@goodmis.org
Cc: Alexander van Heukelum <heukelum@fastmail.fm>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
index e420288..ab39990 100644
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -71,12 +71,28 @@
* could be controled by following calls:
* ftrace_function_local_enable
* ftrace_function_local_disable
+ * SAVE_REGS - The ftrace_ops wants regs saved at each function called
+ * and passed to the callback. If this flag is set, but the
+ * architecture does not support passing regs
+ * (ARCH_SUPPORTS_FTRACE_SAVE_REGS is not defined), then the
+ * ftrace_ops will fail to register, unless the next flag
+ * is set.
+ * SAVE_REGS_IF_SUPPORTED - This is the same as SAVE_REGS, but if the
+ * handler can handle an arch that does not save regs
+ * (the handler tests if regs == NULL), then it can set
+ * this flag instead. It will not fail registering the ftrace_ops
+ * but, the regs field will be NULL if the arch does not support
+ * passing regs to the handler.
+ * Note, if this flag is set, the SAVE_REGS flag will automatically
+ * get set upon registering the ftrace_ops, if the arch supports it.
*/
enum {
- FTRACE_OPS_FL_ENABLED = 1 << 0,
- FTRACE_OPS_FL_GLOBAL = 1 << 1,
- FTRACE_OPS_FL_DYNAMIC = 1 << 2,
- FTRACE_OPS_FL_CONTROL = 1 << 3,
+ FTRACE_OPS_FL_ENABLED = 1 << 0,
+ FTRACE_OPS_FL_GLOBAL = 1 << 1,
+ FTRACE_OPS_FL_DYNAMIC = 1 << 2,
+ FTRACE_OPS_FL_CONTROL = 1 << 3,
+ FTRACE_OPS_FL_SAVE_REGS = 1 << 4,
+ FTRACE_OPS_FL_SAVE_REGS_IF_SUPPORTED = 1 << 5,
};
struct ftrace_ops {
@@ -254,12 +270,31 @@
extern int ftrace_text_reserved(void *start, void *end);
+/*
+ * The dyn_ftrace record's flags field is split into two parts.
+ * the first part which is '0-FTRACE_REF_MAX' is a counter of
+ * the number of callbacks that have registered the function that
+ * the dyn_ftrace descriptor represents.
+ *
+ * The second part is a mask:
+ * ENABLED - the function is being traced
+ * REGS - the record wants the function to save regs
+ * REGS_EN - the function is set up to save regs.
+ *
+ * When a new ftrace_ops is registered and wants a function to save
+ * pt_regs, the rec->flag REGS is set. When the function has been
+ * set up to save regs, the REG_EN flag is set. Once a function
+ * starts saving regs it will do so until all ftrace_ops are removed
+ * from tracing that function.
+ */
enum {
- FTRACE_FL_ENABLED = (1 << 30),
+ FTRACE_FL_ENABLED = (1UL << 29),
+ FTRACE_FL_REGS = (1UL << 30),
+ FTRACE_FL_REGS_EN = (1UL << 31)
};
-#define FTRACE_FL_MASK (0x3UL << 30)
-#define FTRACE_REF_MAX ((1 << 30) - 1)
+#define FTRACE_FL_MASK (0x7UL << 29)
+#define FTRACE_REF_MAX ((1UL << 29) - 1)
struct dyn_ftrace {
union {
@@ -290,9 +325,23 @@
FTRACE_STOP_FUNC_RET = (1 << 4),
};
+/*
+ * The FTRACE_UPDATE_* enum is used to pass information back
+ * from the ftrace_update_record() and ftrace_test_record()
+ * functions. These are called by the code update routines
+ * to find out what is to be done for a given function.
+ *
+ * IGNORE - The function is already what we want it to be
+ * MAKE_CALL - Start tracing the function
+ * MODIFY_CALL - Stop saving regs for the function
+ * MODIFY_CALL_REGS - Start saving regs for the function
+ * MAKE_NOP - Stop tracing the function
+ */
enum {
FTRACE_UPDATE_IGNORE,
FTRACE_UPDATE_MAKE_CALL,
+ FTRACE_UPDATE_MODIFY_CALL,
+ FTRACE_UPDATE_MODIFY_CALL_REGS,
FTRACE_UPDATE_MAKE_NOP,
};
@@ -344,7 +393,9 @@
extern void ftrace_replace_code(int enable);
extern int ftrace_update_ftrace_func(ftrace_func_t func);
extern void ftrace_caller(void);
+extern void ftrace_regs_caller(void);
extern void ftrace_call(void);
+extern void ftrace_regs_call(void);
extern void mcount_call(void);
void ftrace_modify_all_code(int command);
@@ -352,6 +403,15 @@
#ifndef FTRACE_ADDR
#define FTRACE_ADDR ((unsigned long)ftrace_caller)
#endif
+
+#ifndef FTRACE_REGS_ADDR
+#ifdef ARCH_SUPPORTS_FTRACE_SAVE_REGS
+# define FTRACE_REGS_ADDR ((unsigned long)ftrace_regs_caller)
+#else
+# define FTRACE_REGS_ADDR FTRACE_ADDR
+#endif
+#endif
+
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
extern void ftrace_graph_caller(void);
extern int ftrace_enable_ftrace_graph_caller(void);
@@ -407,6 +467,39 @@
*/
extern int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr);
+#ifdef ARCH_SUPPORTS_FTRACE_SAVE_REGS
+/**
+ * ftrace_modify_call - convert from one addr to another (no nop)
+ * @rec: the mcount call site record
+ * @old_addr: the address expected to be currently called to
+ * @addr: the address to change to
+ *
+ * This is a very sensitive operation and great care needs
+ * to be taken by the arch. The operation should carefully
+ * read the location, check to see if what is read is indeed
+ * what we expect it to be, and then on success of the compare,
+ * it should write to the location.
+ *
+ * The code segment at @rec->ip should be a caller to @old_addr
+ *
+ * Return must be:
+ * 0 on success
+ * -EFAULT on error reading the location
+ * -EINVAL on a failed compare of the contents
+ * -EPERM on error writing to the location
+ * Any other value will be considered a failure.
+ */
+extern int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
+ unsigned long addr);
+#else
+/* Should never be called */
+static inline int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
+ unsigned long addr)
+{
+ return -EINVAL;
+}
+#endif
+
/* May be defined in arch */
extern int ftrace_arch_read_dyn_info(char *buf, int size);