OMAP4: clock: Fix multi-omap boot with reset un-used clocks
This patch uses "ENABLE_ON_INIT" flag on the emif clock nodes
to avoid the emif clk getting cut as part of reset un-used clock
routine which prevents boot.
Since "omap4xxx_clk_init()" calls "clk_enable_init_clocks()"
which increases the usecount on all ENABLE_ON_INIT clocks, it
prevents "omap2_clk_disable_unused()" from disabling the clock.
The real fix is to have driver for EMIF and do clock get/enable
as part of it. The EMIF driver is planned to be done HWMOD way
so till that available to keep omap3_defconfig booting on OMAP4430,
this patch is necessary.
(Will updated the auto-gen script for 44xx accordingly)
The fix was suggested by Paul Walmsley
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 0280422..e10db7a 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -1369,6 +1369,7 @@
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL,
+ .flags = ENABLE_ON_INIT,
.clkdm_name = "l3_emif_clkdm",
.parent = &ddrphy_ck,
.recalc = &followparent_recalc,
@@ -1379,6 +1380,7 @@
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL,
+ .flags = ENABLE_ON_INIT,
.clkdm_name = "l3_emif_clkdm",
.parent = &ddrphy_ck,
.recalc = &followparent_recalc,