rtlwifi: rtl8192c-common: rtl8192ce: Fix for HT40 regression
The changes that were made to rtl8192ce when rtl8192cu was added broke
HT40. The errors included a typo in rtlwifi, a missing routine in
rtl8192ce and a missing callback of that routine in rtl8192c-common.
This patch fixes the regression reported in Bug #35082.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c
index 73ae8a4..abe0fcc 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c
@@ -366,6 +366,75 @@
return true;
}
+void rtl92ce_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ u8 reg_bw_opmode;
+ u8 reg_prsr_rsc;
+
+ RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE,
+ ("Switch to %s bandwidth\n",
+ rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20 ?
+ "20MHz" : "40MHz"))
+
+ if (is_hal_stop(rtlhal)) {
+ rtlphy->set_bwmode_inprogress = false;
+ return;
+ }
+
+ reg_bw_opmode = rtl_read_byte(rtlpriv, REG_BWOPMODE);
+ reg_prsr_rsc = rtl_read_byte(rtlpriv, REG_RRSR + 2);
+
+ switch (rtlphy->current_chan_bw) {
+ case HT_CHANNEL_WIDTH_20:
+ reg_bw_opmode |= BW_OPMODE_20MHZ;
+ rtl_write_byte(rtlpriv, REG_BWOPMODE, reg_bw_opmode);
+ break;
+ case HT_CHANNEL_WIDTH_20_40:
+ reg_bw_opmode &= ~BW_OPMODE_20MHZ;
+ rtl_write_byte(rtlpriv, REG_BWOPMODE, reg_bw_opmode);
+ reg_prsr_rsc =
+ (reg_prsr_rsc & 0x90) | (mac->cur_40_prime_sc << 5);
+ rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_prsr_rsc);
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("unknown bandwidth: %#X\n", rtlphy->current_chan_bw));
+ break;
+ }
+
+ switch (rtlphy->current_chan_bw) {
+ case HT_CHANNEL_WIDTH_20:
+ rtl_set_bbreg(hw, RFPGA0_RFMOD, BRFMOD, 0x0);
+ rtl_set_bbreg(hw, RFPGA1_RFMOD, BRFMOD, 0x0);
+ rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER2, BIT(10), 1);
+ break;
+ case HT_CHANNEL_WIDTH_20_40:
+ rtl_set_bbreg(hw, RFPGA0_RFMOD, BRFMOD, 0x1);
+ rtl_set_bbreg(hw, RFPGA1_RFMOD, BRFMOD, 0x1);
+
+ rtl_set_bbreg(hw, RCCK0_SYSTEM, BCCK_SIDEBAND,
+ (mac->cur_40_prime_sc >> 1));
+ rtl_set_bbreg(hw, ROFDM1_LSTF, 0xC00, mac->cur_40_prime_sc);
+ rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER2, BIT(10), 0);
+
+ rtl_set_bbreg(hw, 0x818, (BIT(26) | BIT(27)),
+ (mac->cur_40_prime_sc ==
+ HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("unknown bandwidth: %#X\n", rtlphy->current_chan_bw));
+ break;
+ }
+ rtl92ce_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw);
+ rtlphy->set_bwmode_inprogress = false;
+ RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, ("<==\n"));
+}
+
void _rtl92ce_phy_lc_calibrate(struct ieee80211_hw *hw, bool is2t)
{
u8 tmpreg;