drivers/leds/leds-lp3952.c - kernel/msm-5.4 - Gitiles

 // SPDX-License-Identifier: GPL-2.0-only
 /*
  *	LED driver for TI lp3952 controller
  *
  *	Copyright (C) 2016, DAQRI, LLC.
  *	Author: Tony Makkiel <tony.makkiel@daqri.com>
  */

 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/leds.h>
 #include <linux/leds-lp3952.h>
 #include <linux/module.h>
 #include <linux/notifier.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/reboot.h>
 #include <linux/regmap.h>

 static int lp3952_register_write(struct i2c_client *client, u8 reg, u8 val)
 {
 	int ret;
 	struct lp3952_led_array *priv = i2c_get_clientdata(client);

 	ret = regmap_write(priv->regmap, reg, val);

 	if (ret)
 		dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n",
 			__func__, reg, val, ret);
 	return ret;
 }

 static void lp3952_on_off(struct lp3952_led_array *priv,
 			  enum lp3952_leds led_id, bool on)
 {
 	int ret, val;

 	dev_dbg(&priv->client->dev, "%s LED %d to %d\n", __func__, led_id, on);

 	val = 1 << led_id;
 	if (led_id == LP3952_LED_ALL)
 		val = LP3952_LED_MASK_ALL;

 	ret = regmap_update_bits(priv->regmap, LP3952_REG_LED_CTRL, val,
 				 on ? val : 0);
 	if (ret)
 		dev_err(&priv->client->dev, "%s, Error %d\n", __func__, ret);
 }

 /*
  * Using Imax to control brightness. There are 4 possible
  * setting 25, 50, 75 and 100 % of Imax. Possible values are
  * values 0-4. 0 meaning turn off.
  */
 static int lp3952_set_brightness(struct led_classdev *cdev,
 				 enum led_brightness value)
 {
 	unsigned int reg, shift_val;
 	struct lp3952_ctrl_hdl *led = container_of(cdev,
 						   struct lp3952_ctrl_hdl,
 						   cdev);
 	struct lp3952_led_array *priv = (struct lp3952_led_array *)led->priv;

 	dev_dbg(cdev->dev, "Brightness request: %d on %d\n", value,
 		led->channel);

 	if (value == LED_OFF) {
 		lp3952_on_off(priv, led->channel, false);
 		return 0;
 	}

 	if (led->channel > LP3952_RED_1) {
 		dev_err(cdev->dev, " %s Invalid LED requested", __func__);
 		return -EINVAL;
 	}

 	if (led->channel >= LP3952_BLUE_1) {
 		reg = LP3952_REG_RGB1_MAX_I_CTRL;
 		shift_val = (led->channel - LP3952_BLUE_1) * 2;
 	} else {
 		reg = LP3952_REG_RGB2_MAX_I_CTRL;
 		shift_val = led->channel * 2;
 	}

 	/* Enable the LED in case it is not enabled already */
 	lp3952_on_off(priv, led->channel, true);

 	return regmap_update_bits(priv->regmap, reg, 3 << shift_val,
 				  --value << shift_val);
 }

 static int lp3952_get_label(struct device *dev, const char *label, char *dest)
 {
 	int ret;
 	const char *str;

 	ret = device_property_read_string(dev, label, &str);
 	if (ret)
 		return ret;

 	strncpy(dest, str, LP3952_LABEL_MAX_LEN);
 	return 0;
 }

 static int lp3952_register_led_classdev(struct lp3952_led_array *priv)
 {
 	int i, acpi_ret, ret = -ENODEV;
 	static const char *led_name_hdl[LP3952_LED_ALL] = {
 		"blue2",
 		"green2",
 		"red2",
 		"blue1",
 		"green1",
 		"red1"
 	};

 	for (i = 0; i < LP3952_LED_ALL; i++) {
 		acpi_ret = lp3952_get_label(&priv->client->dev, led_name_hdl[i],
 					    priv->leds[i].name);
 		if (acpi_ret)
 			continue;

 		priv->leds[i].cdev.name = priv->leds[i].name;
 		priv->leds[i].cdev.brightness = LED_OFF;
 		priv->leds[i].cdev.max_brightness = LP3952_BRIGHT_MAX;
 		priv->leds[i].cdev.brightness_set_blocking =
 				lp3952_set_brightness;
 		priv->leds[i].channel = i;
 		priv->leds[i].priv = priv;

 		ret = devm_led_classdev_register(&priv->client->dev,
 						 &priv->leds[i].cdev);
 		if (ret < 0) {
 			dev_err(&priv->client->dev,
 				"couldn't register LED %s\n",
 				priv->leds[i].cdev.name);
 			break;
 		}
 	}
 	return ret;
 }

 static int lp3952_set_pattern_gen_cmd(struct lp3952_led_array *priv,
 				      u8 cmd_index, u8 r, u8 g, u8 b,
 				      enum lp3952_tt tt, enum lp3952_cet cet)
 {
 	int ret;
 	struct ptrn_gen_cmd line = {
 		{
 			{
 				.r = r,
 				.g = g,
 				.b = b,
 				.cet = cet,
 				.tt = tt
 			}
 		}
 	};

 	if (cmd_index >= LP3952_CMD_REG_COUNT)
 		return -EINVAL;

 	ret = lp3952_register_write(priv->client,
 				    LP3952_REG_CMD_0 + cmd_index * 2,
 				    line.bytes.msb);
 	if (ret)
 		return ret;

 	return lp3952_register_write(priv->client,
 				      LP3952_REG_CMD_0 + cmd_index * 2 + 1,
 				      line.bytes.lsb);
 }

 static int lp3952_configure(struct lp3952_led_array *priv)
 {
 	int ret;

 	/* Disable any LEDs on from any previous conf. */
 	ret = lp3952_register_write(priv->client, LP3952_REG_LED_CTRL, 0);
 	if (ret)
 		return ret;

 	/* enable rgb patter, loop */
 	ret = lp3952_register_write(priv->client, LP3952_REG_PAT_GEN_CTRL,
 				    LP3952_PATRN_LOOP | LP3952_PATRN_GEN_EN);
 	if (ret)
 		return ret;

 	/* Update Bit 6 (Active mode), Select both Led sets, Bit [1:0] */
 	ret = lp3952_register_write(priv->client, LP3952_REG_ENABLES,
 				    LP3952_ACTIVE_MODE | LP3952_INT_B00ST_LDR);
 	if (ret)
 		return ret;

 	/* Set Cmd1 for RGB intensity,cmd and transition time */
 	return lp3952_set_pattern_gen_cmd(priv, 0, I46, I71, I100, TT0,
 					   CET197);
 }

 static const struct regmap_config lp3952_regmap = {
 	.reg_bits = 8,
 	.val_bits = 8,
 	.max_register = REG_MAX,
 	.cache_type = REGCACHE_RBTREE,
 };

 static int lp3952_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
 	int status;
 	struct lp3952_led_array *priv;

 	priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;

 	priv->client = client;

 	priv->enable_gpio = devm_gpiod_get(&client->dev, "nrst",
 					   GPIOD_OUT_HIGH);
 	if (IS_ERR(priv->enable_gpio)) {
 		status = PTR_ERR(priv->enable_gpio);
 		dev_err(&client->dev, "Failed to enable gpio: %d\n", status);
 		return status;
 	}

 	priv->regmap = devm_regmap_init_i2c(client, &lp3952_regmap);
 	if (IS_ERR(priv->regmap)) {
 		int err = PTR_ERR(priv->regmap);

 		dev_err(&client->dev, "Failed to allocate register map: %d\n",
 			err);
 		return err;
 	}

 	i2c_set_clientdata(client, priv);

 	status = lp3952_configure(priv);
 	if (status) {
 		dev_err(&client->dev, "Probe failed. Device not found (%d)\n",
 			status);
 		return status;
 	}

 	status = lp3952_register_led_classdev(priv);
 	if (status) {
 		dev_err(&client->dev, "Unable to register led_classdev: %d\n",
 			status);
 		return status;
 	}

 	return 0;
 }

 static int lp3952_remove(struct i2c_client *client)
 {
 	struct lp3952_led_array *priv;

 	priv = i2c_get_clientdata(client);
 	lp3952_on_off(priv, LP3952_LED_ALL, false);
 	gpiod_set_value(priv->enable_gpio, 0);

 	return 0;
 }

 static const struct i2c_device_id lp3952_id[] = {
 	{LP3952_NAME, 0},
 	{}
 };
 MODULE_DEVICE_TABLE(i2c, lp3952_id);

 static struct i2c_driver lp3952_i2c_driver = {
 	.driver = {
 			.name = LP3952_NAME,
 	},
 	.probe = lp3952_probe,
 	.remove = lp3952_remove,
 	.id_table = lp3952_id,
 };

 module_i2c_driver(lp3952_i2c_driver);

 MODULE_AUTHOR("Tony Makkiel <tony.makkiel@daqri.com>");
 MODULE_DESCRIPTION("lp3952 I2C LED controller driver");
 MODULE_LICENSE("GPL v2");
	// SPDX-License-Identifier: GPL-2.0-only
	/*
	* LED driver for TI lp3952 controller
	*
	* Copyright (C) 2016, DAQRI, LLC.
	* Author: Tony Makkiel <tony.makkiel@daqri.com>
	*/

	#include <linux/delay.h>
	#include <linux/gpio.h>
	#include <linux/i2c.h>
	#include <linux/io.h>
	#include <linux/kernel.h>
	#include <linux/leds.h>
	#include <linux/leds-lp3952.h>
	#include <linux/module.h>
	#include <linux/notifier.h>
	#include <linux/platform_device.h>
	#include <linux/pm.h>
	#include <linux/reboot.h>
	#include <linux/regmap.h>

	static int lp3952_register_write(struct i2c_client *client, u8 reg, u8 val)
	{
	int ret;
	struct lp3952_led_array *priv = i2c_get_clientdata(client);

	ret = regmap_write(priv->regmap, reg, val);

	if (ret)
	dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n",
	__func__, reg, val, ret);
	return ret;
	}

	static void lp3952_on_off(struct lp3952_led_array *priv,
	enum lp3952_leds led_id, bool on)
	{
	int ret, val;

	dev_dbg(&priv->client->dev, "%s LED %d to %d\n", __func__, led_id, on);

	val = 1 << led_id;
	if (led_id == LP3952_LED_ALL)
	val = LP3952_LED_MASK_ALL;

	ret = regmap_update_bits(priv->regmap, LP3952_REG_LED_CTRL, val,
	on ? val : 0);
	if (ret)
	dev_err(&priv->client->dev, "%s, Error %d\n", __func__, ret);
	}

	/*
	* Using Imax to control brightness. There are 4 possible
	* setting 25, 50, 75 and 100 % of Imax. Possible values are
	* values 0-4. 0 meaning turn off.
	*/
	static int lp3952_set_brightness(struct led_classdev *cdev,
	enum led_brightness value)
	{
	unsigned int reg, shift_val;
	struct lp3952_ctrl_hdl *led = container_of(cdev,
	struct lp3952_ctrl_hdl,
	cdev);
	struct lp3952_led_array priv = (struct lp3952_led_array )led->priv;

	dev_dbg(cdev->dev, "Brightness request: %d on %d\n", value,
	led->channel);

	if (value == LED_OFF) {
	lp3952_on_off(priv, led->channel, false);
	return 0;
	}

	if (led->channel > LP3952_RED_1) {
	dev_err(cdev->dev, " %s Invalid LED requested", __func__);
	return -EINVAL;
	}

	if (led->channel >= LP3952_BLUE_1) {
	reg = LP3952_REG_RGB1_MAX_I_CTRL;
	shift_val = (led->channel - LP3952_BLUE_1) * 2;
	} else {
	reg = LP3952_REG_RGB2_MAX_I_CTRL;
	shift_val = led->channel * 2;
	}

	/* Enable the LED in case it is not enabled already */
	lp3952_on_off(priv, led->channel, true);

	return regmap_update_bits(priv->regmap, reg, 3 << shift_val,
	--value << shift_val);
	}

	static int lp3952_get_label(struct device dev, const char label, char *dest)
	{
	int ret;
	const char *str;

	ret = device_property_read_string(dev, label, &str);
	if (ret)
	return ret;

	strncpy(dest, str, LP3952_LABEL_MAX_LEN);
	return 0;
	}

	static int lp3952_register_led_classdev(struct lp3952_led_array *priv)
	{
	int i, acpi_ret, ret = -ENODEV;
	static const char *led_name_hdl[LP3952_LED_ALL] = {
	"blue2",
	"green2",
	"red2",
	"blue1",
	"green1",
	"red1"
	};

	for (i = 0; i < LP3952_LED_ALL; i++) {
	acpi_ret = lp3952_get_label(&priv->client->dev, led_name_hdl[i],
	priv->leds[i].name);
	if (acpi_ret)
	continue;

	priv->leds[i].cdev.name = priv->leds[i].name;
	priv->leds[i].cdev.brightness = LED_OFF;
	priv->leds[i].cdev.max_brightness = LP3952_BRIGHT_MAX;
	priv->leds[i].cdev.brightness_set_blocking =
	lp3952_set_brightness;
	priv->leds[i].channel = i;
	priv->leds[i].priv = priv;

	ret = devm_led_classdev_register(&priv->client->dev,
	&priv->leds[i].cdev);
	if (ret < 0) {
	dev_err(&priv->client->dev,
	"couldn't register LED %s\n",
	priv->leds[i].cdev.name);
	break;
	}
	}
	return ret;
	}

	static int lp3952_set_pattern_gen_cmd(struct lp3952_led_array *priv,
	u8 cmd_index, u8 r, u8 g, u8 b,
	enum lp3952_tt tt, enum lp3952_cet cet)
	{
	int ret;
	struct ptrn_gen_cmd line = {
	{
	{
	.r = r,
	.g = g,
	.b = b,
	.cet = cet,
	.tt = tt
	}
	}
	};

	if (cmd_index >= LP3952_CMD_REG_COUNT)
	return -EINVAL;

	ret = lp3952_register_write(priv->client,
	LP3952_REG_CMD_0 + cmd_index * 2,
	line.bytes.msb);
	if (ret)
	return ret;

	return lp3952_register_write(priv->client,
	LP3952_REG_CMD_0 + cmd_index * 2 + 1,
	line.bytes.lsb);
	}

	static int lp3952_configure(struct lp3952_led_array *priv)
	{
	int ret;

	/* Disable any LEDs on from any previous conf. */
	ret = lp3952_register_write(priv->client, LP3952_REG_LED_CTRL, 0);
	if (ret)
	return ret;

	/* enable rgb patter, loop */
	ret = lp3952_register_write(priv->client, LP3952_REG_PAT_GEN_CTRL,
	LP3952_PATRN_LOOP \| LP3952_PATRN_GEN_EN);
	if (ret)
	return ret;

	/* Update Bit 6 (Active mode), Select both Led sets, Bit [1:0] */
	ret = lp3952_register_write(priv->client, LP3952_REG_ENABLES,
	LP3952_ACTIVE_MODE \| LP3952_INT_B00ST_LDR);
	if (ret)
	return ret;

	/* Set Cmd1 for RGB intensity,cmd and transition time */
	return lp3952_set_pattern_gen_cmd(priv, 0, I46, I71, I100, TT0,
	CET197);
	}

	static const struct regmap_config lp3952_regmap = {
	.reg_bits = 8,
	.val_bits = 8,
	.max_register = REG_MAX,
	.cache_type = REGCACHE_RBTREE,
	};

	static int lp3952_probe(struct i2c_client *client,
	const struct i2c_device_id *id)
	{
	int status;
	struct lp3952_led_array *priv;

	priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
	if (!priv)
	return -ENOMEM;

	priv->client = client;

	priv->enable_gpio = devm_gpiod_get(&client->dev, "nrst",
	GPIOD_OUT_HIGH);
	if (IS_ERR(priv->enable_gpio)) {
	status = PTR_ERR(priv->enable_gpio);
	dev_err(&client->dev, "Failed to enable gpio: %d\n", status);
	return status;
	}

	priv->regmap = devm_regmap_init_i2c(client, &lp3952_regmap);
	if (IS_ERR(priv->regmap)) {
	int err = PTR_ERR(priv->regmap);

	dev_err(&client->dev, "Failed to allocate register map: %d\n",
	err);
	return err;
	}

	i2c_set_clientdata(client, priv);

	status = lp3952_configure(priv);
	if (status) {
	dev_err(&client->dev, "Probe failed. Device not found (%d)\n",
	status);
	return status;
	}

	status = lp3952_register_led_classdev(priv);
	if (status) {
	dev_err(&client->dev, "Unable to register led_classdev: %d\n",
	status);
	return status;
	}

	return 0;
	}

	static int lp3952_remove(struct i2c_client *client)
	{
	struct lp3952_led_array *priv;

	priv = i2c_get_clientdata(client);
	lp3952_on_off(priv, LP3952_LED_ALL, false);
	gpiod_set_value(priv->enable_gpio, 0);

	return 0;
	}

	static const struct i2c_device_id lp3952_id[] = {
	{LP3952_NAME, 0},
	{}
	};
	MODULE_DEVICE_TABLE(i2c, lp3952_id);

	static struct i2c_driver lp3952_i2c_driver = {
	.driver = {
	.name = LP3952_NAME,
	},
	.probe = lp3952_probe,
	.remove = lp3952_remove,
	.id_table = lp3952_id,
	};

	module_i2c_driver(lp3952_i2c_driver);

	MODULE_AUTHOR("Tony Makkiel <tony.makkiel@daqri.com>");
	MODULE_DESCRIPTION("lp3952 I2C LED controller driver");
	MODULE_LICENSE("GPL v2");