diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 23daed3..79bc870 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1522,6 +1522,8 @@
  * structure can then access it via hw->priv. Note that mac802111 drivers should
  * not use wiphy_priv() to try to get their private driver structure as this
  * is already used internally by mac80211.
+ *
+ * Return: The mac80211 driver hw struct of @wiphy.
  */
 struct ieee80211_hw *wiphy_to_ieee80211_hw(struct wiphy *wiphy);
 
@@ -2673,6 +2675,8 @@
  *
  * @priv_data_len: length of private data
  * @ops: callbacks for this device
+ *
+ * Return: A pointer to the new hardware device, or %NULL on error.
  */
 struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
 					const struct ieee80211_ops *ops);
@@ -2685,6 +2689,8 @@
  * need to fill the contained wiphy's information.
  *
  * @hw: the device to register as returned by ieee80211_alloc_hw()
+ *
+ * Return: 0 on success. An error code otherwise.
  */
 int ieee80211_register_hw(struct ieee80211_hw *hw);
 
@@ -2731,6 +2737,8 @@
  * of the trigger so you can automatically link the LED device.
  *
  * @hw: the hardware to get the LED trigger name for
+ *
+ * Return: The name of the LED trigger. %NULL if not configured for LEDs.
  */
 static inline char *ieee80211_get_tx_led_name(struct ieee80211_hw *hw)
 {
@@ -2750,6 +2758,8 @@
  * of the trigger so you can automatically link the LED device.
  *
  * @hw: the hardware to get the LED trigger name for
+ *
+ * Return: The name of the LED trigger. %NULL if not configured for LEDs.
  */
 static inline char *ieee80211_get_rx_led_name(struct ieee80211_hw *hw)
 {
@@ -2769,6 +2779,8 @@
  * of the trigger so you can automatically link the LED device.
  *
  * @hw: the hardware to get the LED trigger name for
+ *
+ * Return: The name of the LED trigger. %NULL if not configured for LEDs.
  */
 static inline char *ieee80211_get_assoc_led_name(struct ieee80211_hw *hw)
 {
@@ -2788,6 +2800,8 @@
  * of the trigger so you can automatically link the LED device.
  *
  * @hw: the hardware to get the LED trigger name for
+ *
+ * Return: The name of the LED trigger. %NULL if not configured for LEDs.
  */
 static inline char *ieee80211_get_radio_led_name(struct ieee80211_hw *hw)
 {
@@ -2805,9 +2819,10 @@
  * @blink_table: the blink table -- needs to be ordered by throughput
  * @blink_table_len: size of the blink table
  *
- * This function returns %NULL (in case of error, or if no LED
- * triggers are configured) or the name of the new trigger.
- * This function must be called before ieee80211_register_hw().
+ * Return: %NULL (in case of error, or if no LED triggers are
+ * configured) or the name of the new trigger.
+ *
+ * Note: This function must be called before ieee80211_register_hw().
  */
 static inline char *
 ieee80211_create_tpt_led_trigger(struct ieee80211_hw *hw, unsigned int flags,
@@ -2940,10 +2955,10 @@
  * Calls to this function for a single hardware must be synchronized against
  * each other.
  *
- * The function returns -EINVAL when the requested PS mode is already set.
- *
  * @sta: currently connected sta
  * @start: start or stop PS
+ *
+ * Return: 0 on success. -EINVAL when the requested PS mode is already set.
  */
 int ieee80211_sta_ps_transition(struct ieee80211_sta *sta, bool start);
 
@@ -2957,6 +2972,8 @@
  *
  * @sta: currently connected sta
  * @start: start or stop PS
+ *
+ * Return: Like ieee80211_sta_ps_transition().
  */
 static inline int ieee80211_sta_ps_transition_ni(struct ieee80211_sta *sta,
 						  bool start)
@@ -3094,6 +3111,8 @@
  * according to the current DTIM parameters/TIM bitmap.
  *
  * The driver is responsible for freeing the returned skb.
+ *
+ * Return: The beacon template. %NULL on error.
  */
 struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
 					 struct ieee80211_vif *vif,
@@ -3105,6 +3124,8 @@
  * @vif: &struct ieee80211_vif pointer from the add_interface callback.
  *
  * See ieee80211_beacon_get_tim().
+ *
+ * Return: See ieee80211_beacon_get_tim().
  */
 static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
 						   struct ieee80211_vif *vif)
@@ -3121,6 +3142,8 @@
  * hardware. The destination address should be set by the caller.
  *
  * Can only be called in AP mode.
+ *
+ * Return: The Probe Response template. %NULL on error.
  */
 struct sk_buff *ieee80211_proberesp_get(struct ieee80211_hw *hw,
 					struct ieee80211_vif *vif);
@@ -3136,6 +3159,8 @@
  *
  * Note: Caller (or hardware) is responsible for setting the
  * &IEEE80211_FCTL_PM bit.
+ *
+ * Return: The PS Poll template. %NULL on error.
  */
 struct sk_buff *ieee80211_pspoll_get(struct ieee80211_hw *hw,
 				     struct ieee80211_vif *vif);
@@ -3151,6 +3176,8 @@
  *
  * Note: Caller (or hardware) is responsible for setting the
  * &IEEE80211_FCTL_PM bit as well as Duration and Sequence Control fields.
+ *
+ * Return: The nullfunc template. %NULL on error.
  */
 struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw,
 				       struct ieee80211_vif *vif);
@@ -3165,6 +3192,8 @@
  *
  * Creates a Probe Request template which can, for example, be uploaded to
  * hardware.
+ *
+ * Return: The Probe Request template. %NULL on error.
  */
 struct sk_buff *ieee80211_probereq_get(struct ieee80211_hw *hw,
 				       struct ieee80211_vif *vif,
@@ -3200,6 +3229,8 @@
  * If the RTS is generated in firmware, but the host system must provide
  * the duration field, the low-level driver uses this function to receive
  * the duration field value in little-endian byteorder.
+ *
+ * Return: The duration.
  */
 __le16 ieee80211_rts_duration(struct ieee80211_hw *hw,
 			      struct ieee80211_vif *vif, size_t frame_len,
@@ -3235,6 +3266,8 @@
  * If the CTS-to-self is generated in firmware, but the host system must provide
  * the duration field, the low-level driver uses this function to receive
  * the duration field value in little-endian byteorder.
+ *
+ * Return: The duration.
  */
 __le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw,
 				    struct ieee80211_vif *vif,
@@ -3251,6 +3284,8 @@
  *
  * Calculate the duration field of some generic frame, given its
  * length and transmission rate (in 100kbps).
+ *
+ * Return: The duration.
  */
 __le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw,
 					struct ieee80211_vif *vif,
@@ -3267,9 +3302,10 @@
  * hardware/firmware does not implement buffering of broadcast/multicast
  * frames when power saving is used, 802.11 code buffers them in the host
  * memory. The low-level driver uses this function to fetch next buffered
- * frame. In most cases, this is used when generating beacon frame. This
- * function returns a pointer to the next buffered skb or NULL if no more
- * buffered frames are available.
+ * frame. In most cases, this is used when generating beacon frame.
+ *
+ * Return: A pointer to the next buffered skb or NULL if no more buffered
+ * frames are available.
  *
  * Note: buffered frames are returned only after DTIM beacon frame was
  * generated with ieee80211_beacon_get() and the low-level driver must thus
@@ -3449,6 +3485,8 @@
  * @queue: queue number (counted from zero).
  *
  * Drivers should use this function instead of netif_stop_queue.
+ *
+ * Return: %true if the queue is stopped. %false otherwise.
  */
 
 int ieee80211_queue_stopped(struct ieee80211_hw *hw, int queue);
@@ -3646,7 +3684,9 @@
  * @vif: virtual interface to look for station on
  * @addr: station's address
  *
- * This function must be called under RCU lock and the
+ * Return: The station, if found. %NULL otherwise.
+ *
+ * Note: This function must be called under RCU lock and the
  * resulting pointer is only valid under RCU lock as well.
  */
 struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif,
@@ -3659,7 +3699,9 @@
  * @addr: remote station's address
  * @localaddr: local address (vif->sdata->vif.addr). Use NULL for 'any'.
  *
- * This function must be called under RCU lock and the
+ * Return: The station, if found. %NULL otherwise.
+ *
+ * Note: This function must be called under RCU lock and the
  * resulting pointer is only valid under RCU lock as well.
  *
  * NOTE: You may pass NULL for localaddr, but then you will just get
@@ -3789,7 +3831,9 @@
  * information. This function must only be called from within the
  * .bss_info_changed callback function and only in managed mode. The function
  * is only useful when the interface is associated, otherwise it will return
- * NULL.
+ * %NULL.
+ *
+ * Return: The Probe Request template. %NULL on error.
  */
 struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw,
 					  struct ieee80211_vif *vif);
@@ -4136,12 +4180,14 @@
 void ieee80211_disable_rssi_reports(struct ieee80211_vif *vif);
 
 /**
- * ieee80211_ave_rssi - report the average rssi for the specified interface
+ * ieee80211_ave_rssi - report the average RSSI for the specified interface
  *
  * @vif: the specified virtual interface
  *
- * This function return the average rssi value for the requested interface.
- * It assumes that the given vif is valid.
+ * Note: This function assumes that the given vif is valid.
+ *
+ * Return: The average RSSI value for the requested interface, or 0 if not
+ * applicable.
  */
 int ieee80211_ave_rssi(struct ieee80211_vif *vif);