ALSA: usb-audio: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
As there are too deep indirections (e.g. ep->chip->dev->dev),
a few new local macros, usb_audio_err() & co, are introduced.
Also, the device numbers in some messages are dropped, as they are
shown in the prefix automatically.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/usb/card.c b/sound/usb/card.c
index 0cfdc2d..893d5a1 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -139,8 +139,8 @@
struct usb_interface *iface = usb_ifnum_to_if(dev, interface);
if (!iface) {
- snd_printk(KERN_ERR "%d:%u:%d : does not exist\n",
- dev->devnum, ctrlif, interface);
+ dev_err(&dev->dev, "%u:%d : does not exist\n",
+ ctrlif, interface);
return -EINVAL;
}
@@ -165,8 +165,8 @@
}
if (usb_interface_claimed(iface)) {
- snd_printdd(KERN_INFO "%d:%d:%d: skipping, already claimed\n",
- dev->devnum, ctrlif, interface);
+ dev_dbg(&dev->dev, "%d:%d: skipping, already claimed\n",
+ ctrlif, interface);
return -EINVAL;
}
@@ -176,8 +176,9 @@
int err = snd_usbmidi_create(chip->card, iface,
&chip->midi_list, NULL);
if (err < 0) {
- snd_printk(KERN_ERR "%d:%u:%d: cannot create sequencer device\n",
- dev->devnum, ctrlif, interface);
+ dev_err(&dev->dev,
+ "%u:%d: cannot create sequencer device\n",
+ ctrlif, interface);
return -EINVAL;
}
usb_driver_claim_interface(&usb_audio_driver, iface, (void *)-1L);
@@ -188,14 +189,15 @@
if ((altsd->bInterfaceClass != USB_CLASS_AUDIO &&
altsd->bInterfaceClass != USB_CLASS_VENDOR_SPEC) ||
altsd->bInterfaceSubClass != USB_SUBCLASS_AUDIOSTREAMING) {
- snd_printdd(KERN_ERR "%d:%u:%d: skipping non-supported interface %d\n",
- dev->devnum, ctrlif, interface, altsd->bInterfaceClass);
+ dev_dbg(&dev->dev,
+ "%u:%d: skipping non-supported interface %d\n",
+ ctrlif, interface, altsd->bInterfaceClass);
/* skip non-supported classes */
return -EINVAL;
}
if (snd_usb_get_speed(dev) == USB_SPEED_LOW) {
- snd_printk(KERN_ERR "low speed audio streaming not supported\n");
+ dev_err(&dev->dev, "low speed audio streaming not supported\n");
return -EINVAL;
}
@@ -228,26 +230,27 @@
protocol = altsd->bInterfaceProtocol;
if (!control_header) {
- snd_printk(KERN_ERR "cannot find UAC_HEADER\n");
+ dev_err(&dev->dev, "cannot find UAC_HEADER\n");
return -EINVAL;
}
switch (protocol) {
default:
- snd_printdd(KERN_WARNING "unknown interface protocol %#02x, assuming v1\n",
- protocol);
+ dev_warn(&dev->dev,
+ "unknown interface protocol %#02x, assuming v1\n",
+ protocol);
/* fall through */
case UAC_VERSION_1: {
struct uac1_ac_header_descriptor *h1 = control_header;
if (!h1->bInCollection) {
- snd_printk(KERN_INFO "skipping empty audio interface (v1)\n");
+ dev_info(&dev->dev, "skipping empty audio interface (v1)\n");
return -EINVAL;
}
if (h1->bLength < sizeof(*h1) + h1->bInCollection) {
- snd_printk(KERN_ERR "invalid UAC_HEADER (v1)\n");
+ dev_err(&dev->dev, "invalid UAC_HEADER (v1)\n");
return -EINVAL;
}
@@ -277,7 +280,7 @@
}
if (!assoc) {
- snd_printk(KERN_ERR "Audio class v2 interfaces need an interface association\n");
+ dev_err(&dev->dev, "Audio class v2 interfaces need an interface association\n");
return -EINVAL;
}
@@ -351,14 +354,14 @@
case USB_SPEED_SUPER:
break;
default:
- snd_printk(KERN_ERR "unknown device speed %d\n", snd_usb_get_speed(dev));
+ dev_err(&dev->dev, "unknown device speed %d\n", snd_usb_get_speed(dev));
return -ENXIO;
}
err = snd_card_new(&intf->dev, index[idx], id[idx], THIS_MODULE,
0, &card);
if (err < 0) {
- snd_printk(KERN_ERR "cannot create card instance %d\n", idx);
+ dev_err(&dev->dev, "cannot create card instance %d\n", idx);
return err;
}
@@ -499,7 +502,7 @@
for (i = 0; i < SNDRV_CARDS; i++) {
if (usb_chip[i] && usb_chip[i]->dev == dev) {
if (usb_chip[i]->shutdown) {
- snd_printk(KERN_ERR "USB device is in the shutdown state, cannot create a card instance\n");
+ dev_err(&dev->dev, "USB device is in the shutdown state, cannot create a card instance\n");
goto __error;
}
chip = usb_chip[i];
@@ -523,7 +526,7 @@
break;
}
if (!chip) {
- printk(KERN_ERR "no available usb audio device\n");
+ dev_err(&dev->dev, "no available usb audio device\n");
goto __error;
}
}