i40e: Remove unnecessary pf members
We can use the stat index macro directly, a variable is not required.
Change-ID: I19f08ac16353dc0cd87a1a8248d714e15a54aa8a
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index 0bfa5a0..aca9cef 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -266,8 +266,6 @@
struct hlist_head fdir_filter_list;
u16 fdir_pf_active_filters;
- u16 fd_sb_cnt_idx;
- u16 fd_atr_cnt_idx;
unsigned long fd_flush_timestamp;
u32 fd_flush_cnt;
u32 fd_add_err;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index c568c90..9a68c65 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -2293,7 +2293,7 @@
input->pctype = 0;
input->dest_vsi = vsi->id;
input->fd_status = I40E_FILTER_PROGRAM_DESC_FD_STATUS_FD_ID;
- input->cnt_index = pf->fd_sb_cnt_idx;
+ input->cnt_index = I40E_FD_SB_STAT_IDX(pf->hw.pf_id);
input->flow_type = fsp->flow_type;
input->ip4_proto = fsp->h_u.usr_ip4_spec.proto;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index e70a616..6f16f56 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -1096,10 +1096,12 @@
&osd->rx_jabber, &nsd->rx_jabber);
/* FDIR stats */
- i40e_stat_update32(hw, I40E_GLQF_PCNT(pf->fd_atr_cnt_idx),
+ i40e_stat_update32(hw,
+ I40E_GLQF_PCNT(I40E_FD_ATR_STAT_IDX(pf->hw.pf_id)),
pf->stat_offsets_loaded,
&osd->fd_atr_match, &nsd->fd_atr_match);
- i40e_stat_update32(hw, I40E_GLQF_PCNT(pf->fd_sb_cnt_idx),
+ i40e_stat_update32(hw,
+ I40E_GLQF_PCNT(I40E_FD_SB_STAT_IDX(pf->hw.pf_id)),
pf->stat_offsets_loaded,
&osd->fd_sb_match, &nsd->fd_sb_match);
i40e_stat_update32(hw,
@@ -7679,12 +7681,8 @@
(pf->hw.func_caps.fd_filters_best_effort > 0)) {
pf->flags |= I40E_FLAG_FD_ATR_ENABLED;
pf->atr_sample_rate = I40E_DEFAULT_ATR_SAMPLE_RATE;
- /* Setup a counter for fd_atr per PF */
- pf->fd_atr_cnt_idx = I40E_FD_ATR_STAT_IDX(pf->hw.pf_id);
if (!(pf->flags & I40E_FLAG_MFP_ENABLED)) {
pf->flags |= I40E_FLAG_FD_SB_ENABLED;
- /* Setup a counter for fd_sb per PF */
- pf->fd_sb_cnt_idx = I40E_FD_SB_STAT_IDX(pf->hw.pf_id);
} else {
dev_info(&pf->pdev->dev,
"Flow Director Sideband mode Disabled in MFP mode\n");