Merge branch 'stmmac-pci-Refactor-DMI-probing'
Jan Kiszka says:
====================
stmmac: pci: Refactor DMI probing
Some cleanups of the way we probe DMI platforms in the driver. Reduces
a bit of open-coding and makes the logic easier reusable for any
potential DMI platform != Quark.
Tested on IOT2000 and Galileo Gen2.
Changes in v5:
- fixed a remaining issue in patch 5
- dropped patch 6 for now
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
index 22f9107..8d375e5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
@@ -30,42 +30,39 @@
* negative value of the address means that MAC controller is not connected
* with PHY.
*/
-struct stmmac_pci_dmi_data {
- const char *name;
- const char *asset_tag;
+struct stmmac_pci_func_data {
unsigned int func;
int phy_addr;
};
-struct stmmac_pci_info {
- struct pci_dev *pdev;
- int (*setup)(struct plat_stmmacenet_data *plat,
- struct stmmac_pci_info *info);
- struct stmmac_pci_dmi_data *dmi;
+struct stmmac_pci_dmi_data {
+ const struct stmmac_pci_func_data *func;
+ size_t nfuncs;
};
-static int stmmac_pci_find_phy_addr(struct stmmac_pci_info *info)
+struct stmmac_pci_info {
+ int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat);
+};
+
+static int stmmac_pci_find_phy_addr(struct pci_dev *pdev,
+ const struct dmi_system_id *dmi_list)
{
- const char *name = dmi_get_system_info(DMI_BOARD_NAME);
- const char *asset_tag = dmi_get_system_info(DMI_BOARD_ASSET_TAG);
- unsigned int func = PCI_FUNC(info->pdev->devfn);
- struct stmmac_pci_dmi_data *dmi;
+ const struct stmmac_pci_func_data *func_data;
+ const struct stmmac_pci_dmi_data *dmi_data;
+ const struct dmi_system_id *dmi_id;
+ int func = PCI_FUNC(pdev->devfn);
+ size_t n;
- /*
- * Galileo boards with old firmware don't support DMI. We always return
- * 1 here, so at least first found MAC controller would be probed.
- */
- if (!name)
- return 1;
+ dmi_id = dmi_first_match(dmi_list);
+ if (!dmi_id)
+ return -ENODEV;
- for (dmi = info->dmi; dmi->name && *dmi->name; dmi++) {
- if (!strcmp(dmi->name, name) && dmi->func == func) {
- /* If asset tag is provided, match on it as well. */
- if (dmi->asset_tag && strcmp(dmi->asset_tag, asset_tag))
- continue;
- return dmi->phy_addr;
- }
- }
+ dmi_data = dmi_id->driver_data;
+ func_data = dmi_data->func;
+
+ for (n = 0; n < dmi_data->nfuncs; n++, func_data++)
+ if (func_data->func == func)
+ return func_data->phy_addr;
return -ENODEV;
}
@@ -100,7 +97,8 @@ static void common_default_data(struct plat_stmmacenet_data *plat)
plat->rx_queues_cfg[0].pkt_route = 0x0;
}
-static void stmmac_default_data(struct plat_stmmacenet_data *plat)
+static int stmmac_default_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
{
/* Set common default data first */
common_default_data(plat);
@@ -112,12 +110,77 @@ static void stmmac_default_data(struct plat_stmmacenet_data *plat)
plat->dma_cfg->pbl = 32;
plat->dma_cfg->pblx8 = true;
/* TODO: AXI */
+
+ return 0;
}
-static int quark_default_data(struct plat_stmmacenet_data *plat,
- struct stmmac_pci_info *info)
+static const struct stmmac_pci_info stmmac_pci_info = {
+ .setup = stmmac_default_data,
+};
+
+static const struct stmmac_pci_func_data galileo_stmmac_func_data[] = {
+ {
+ .func = 6,
+ .phy_addr = 1,
+ },
+};
+
+static const struct stmmac_pci_dmi_data galileo_stmmac_dmi_data = {
+ .func = galileo_stmmac_func_data,
+ .nfuncs = ARRAY_SIZE(galileo_stmmac_func_data),
+};
+
+static const struct stmmac_pci_func_data iot2040_stmmac_func_data[] = {
+ {
+ .func = 6,
+ .phy_addr = 1,
+ },
+ {
+ .func = 7,
+ .phy_addr = 1,
+ },
+};
+
+static const struct stmmac_pci_dmi_data iot2040_stmmac_dmi_data = {
+ .func = iot2040_stmmac_func_data,
+ .nfuncs = ARRAY_SIZE(iot2040_stmmac_func_data),
+};
+
+static const struct dmi_system_id quark_pci_dmi[] = {
+ {
+ .matches = {
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "Galileo"),
+ },
+ .driver_data = (void *)&galileo_stmmac_dmi_data,
+ },
+ {
+ .matches = {
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "GalileoGen2"),
+ },
+ .driver_data = (void *)&galileo_stmmac_dmi_data,
+ },
+ {
+ .matches = {
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"),
+ DMI_EXACT_MATCH(DMI_BOARD_ASSET_TAG,
+ "6ES7647-0AA00-0YA2"),
+ },
+ .driver_data = (void *)&galileo_stmmac_dmi_data,
+ },
+ {
+ .matches = {
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"),
+ DMI_EXACT_MATCH(DMI_BOARD_ASSET_TAG,
+ "6ES7647-0AA00-1YA2"),
+ },
+ .driver_data = (void *)&iot2040_stmmac_dmi_data,
+ },
+ {}
+};
+
+static int quark_default_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
{
- struct pci_dev *pdev = info->pdev;
int ret;
/* Set common default data first */
@@ -127,9 +190,19 @@ static int quark_default_data(struct plat_stmmacenet_data *plat,
* Refuse to load the driver and register net device if MAC controller
* does not connect to any PHY interface.
*/
- ret = stmmac_pci_find_phy_addr(info);
- if (ret < 0)
- return ret;
+ ret = stmmac_pci_find_phy_addr(pdev, quark_pci_dmi);
+ if (ret < 0) {
+ /* Return error to the caller on DMI enabled boards. */
+ if (dmi_get_system_info(DMI_BOARD_NAME))
+ return ret;
+
+ /*
+ * Galileo boards with old firmware don't support DMI. We always
+ * use 1 here as PHY address, so at least the first found MAC
+ * controller would be probed.
+ */
+ ret = 1;
+ }
plat->bus_id = PCI_DEVID(pdev->bus->number, pdev->devfn);
plat->phy_addr = ret;
@@ -143,41 +216,8 @@ static int quark_default_data(struct plat_stmmacenet_data *plat,
return 0;
}
-static struct stmmac_pci_dmi_data quark_pci_dmi_data[] = {
- {
- .name = "Galileo",
- .func = 6,
- .phy_addr = 1,
- },
- {
- .name = "GalileoGen2",
- .func = 6,
- .phy_addr = 1,
- },
- {
- .name = "SIMATIC IOT2000",
- .asset_tag = "6ES7647-0AA00-0YA2",
- .func = 6,
- .phy_addr = 1,
- },
- {
- .name = "SIMATIC IOT2000",
- .asset_tag = "6ES7647-0AA00-1YA2",
- .func = 6,
- .phy_addr = 1,
- },
- {
- .name = "SIMATIC IOT2000",
- .asset_tag = "6ES7647-0AA00-1YA2",
- .func = 7,
- .phy_addr = 1,
- },
- {}
-};
-
-static struct stmmac_pci_info quark_pci_info = {
+static const struct stmmac_pci_info quark_pci_info = {
.setup = quark_default_data,
- .dmi = quark_pci_dmi_data,
};
/**
@@ -236,15 +276,9 @@ static int stmmac_pci_probe(struct pci_dev *pdev,
pci_set_master(pdev);
- if (info) {
- info->pdev = pdev;
- if (info->setup) {
- ret = info->setup(plat, info);
- if (ret)
- return ret;
- }
- } else
- stmmac_default_data(plat);
+ ret = info->setup(pdev, plat);
+ if (ret)
+ return ret;
pci_enable_msi(pdev);
@@ -270,14 +304,21 @@ static void stmmac_pci_remove(struct pci_dev *pdev)
static SIMPLE_DEV_PM_OPS(stmmac_pm_ops, stmmac_suspend, stmmac_resume);
-#define STMMAC_VENDOR_ID 0x700
+/* synthetic ID, no official vendor */
+#define PCI_VENDOR_ID_STMMAC 0x700
+
#define STMMAC_QUARK_ID 0x0937
#define STMMAC_DEVICE_ID 0x1108
+#define STMMAC_DEVICE(vendor_id, dev_id, info) { \
+ PCI_VDEVICE(vendor_id, dev_id), \
+ .driver_data = (kernel_ulong_t)&info \
+ }
+
static const struct pci_device_id stmmac_id_table[] = {
- {PCI_DEVICE(STMMAC_VENDOR_ID, STMMAC_DEVICE_ID)},
- {PCI_DEVICE(PCI_VENDOR_ID_STMICRO, PCI_DEVICE_ID_STMICRO_MAC)},
- {PCI_VDEVICE(INTEL, STMMAC_QUARK_ID), (kernel_ulong_t)&quark_pci_info},
+ STMMAC_DEVICE(STMMAC, STMMAC_DEVICE_ID, stmmac_pci_info),
+ STMMAC_DEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_MAC, stmmac_pci_info),
+ STMMAC_DEVICE(INTEL, STMMAC_QUARK_ID, quark_pci_info),
{}
};