Merge branch 'akpm' (Andrew's patch-bomb)

Merge patches from Andrew Morton:
 "Nine patches - some bug fixes and some MAINTAINERS fiddling."

* emailed from Andrew Morton <akpm@linux-foundation.org>:
  drivers/video/backlight/s6e63m0.c: fix corruption storing gamma mode
  MAINTAINERS: add entry for exynos mipi display drivers
  MAINTAINERS: fix link to Gustavo Padovans tree
  MAINTAINERS: add Johan to Bluetooth maintainers
  MAINTAINERS: Gustavo has moved
  prctl: use CAP_SYS_RESOURCE for PR_SET_MM option
  rapidio/tsi721: fix bug in register offset definitions
  MAINTAINERS: update ST's Mailing list for SPEAr
  memcg: free mem_cgroup by RCU to fix oops
diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf
index 3f44dbd..ceaf6f6 100644
--- a/Documentation/hwmon/w83627ehf
+++ b/Documentation/hwmon/w83627ehf
@@ -50,7 +50,7 @@
 (NCT6775F), and NCT6776F super I/O chips. We will refer to them collectively
 as Winbond chips.
 
-The chips implement 2 to 4 temperature sensors (9 for NCT6775F and NCT6776F),
+The chips implement 3 to 4 temperature sensors (9 for NCT6775F and NCT6776F),
 2 to 5 fan rotation speed sensors, 8 to 10 analog voltage sensors, one VID
 (except for 627UHG), alarms with beep warnings (control unimplemented),
 and some automatic fan regulation strategies (plus manual fan control mode).
@@ -143,8 +143,13 @@
 pwm[1-4]_stop_time  - how many milliseconds [ms] must elapse to switch
                       corresponding fan off. (when the temperature was below
                       defined range).
+pwm[1-4]_start_output-minimum fan speed (range 1 - 255) when spinning up
+pwm[1-4]_step_output- rate of fan speed change (1 - 255)
+pwm[1-4]_stop_output- minimum fan speed (range 1 - 255) when spinning down
+pwm[1-4]_max_output - maximum fan speed (range 1 - 255), when the temperature
+                      is above defined range.
 
-Note: last two functions are influenced by other control bits, not yet exported
+Note: last six functions are influenced by other control bits, not yet exported
       by the driver, so a change might not have any effect.
 
 Implementation Details
diff --git a/Documentation/hwmon/zl6100 b/Documentation/hwmon/zl6100
index 51f76a1..a4e8d90 100644
--- a/Documentation/hwmon/zl6100
+++ b/Documentation/hwmon/zl6100
@@ -88,14 +88,12 @@
 delay
 -----
 
-Some Intersil/Zilker Labs DC-DC controllers require a minimum interval between
-I2C bus accesses. According to Intersil, the minimum interval is 2 ms, though
-1 ms appears to be sufficient and has not caused any problems in testing.
-The problem is known to affect ZL6100, ZL2105, and ZL2008. It is known not to
-affect ZL2004 and ZL6105. The driver automatically sets the interval to 1 ms
-except for ZL2004 and ZL6105. To enable manual override, the driver provides a
-writeable module parameter, 'delay', which can be used to set the interval to
-a value between 0 and 65,535 microseconds.
+Intersil/Zilker Labs DC-DC controllers require a minimum interval between I2C
+bus accesses. According to Intersil, the minimum interval is 2 ms, though 1 ms
+appears to be sufficient and has not caused any problems in testing. The problem
+is known to affect all currently supported chips. For manual override, the
+driver provides a writeable module parameter, 'delay', which can be used to set
+the interval to a value between 0 and 65,535 microseconds.
 
 
 Sysfs entries
diff --git a/drivers/gpu/drm/exynos/exynos_drm_connector.c b/drivers/gpu/drm/exynos/exynos_drm_connector.c
index 618bd4d..99d5527 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_connector.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_connector.c
@@ -54,14 +54,14 @@
 	mode->vrefresh = timing->refresh;
 
 	mode->hdisplay = timing->xres;
-	mode->hsync_start = mode->hdisplay + timing->left_margin;
+	mode->hsync_start = mode->hdisplay + timing->right_margin;
 	mode->hsync_end = mode->hsync_start + timing->hsync_len;
-	mode->htotal = mode->hsync_end + timing->right_margin;
+	mode->htotal = mode->hsync_end + timing->left_margin;
 
 	mode->vdisplay = timing->yres;
-	mode->vsync_start = mode->vdisplay + timing->upper_margin;
+	mode->vsync_start = mode->vdisplay + timing->lower_margin;
 	mode->vsync_end = mode->vsync_start + timing->vsync_len;
-	mode->vtotal = mode->vsync_end + timing->lower_margin;
+	mode->vtotal = mode->vsync_end + timing->upper_margin;
 	mode->width_mm = panel->width_mm;
 	mode->height_mm = panel->height_mm;
 
@@ -85,14 +85,14 @@
 	timing->refresh = drm_mode_vrefresh(mode);
 
 	timing->xres = mode->hdisplay;
-	timing->left_margin = mode->hsync_start - mode->hdisplay;
+	timing->right_margin = mode->hsync_start - mode->hdisplay;
 	timing->hsync_len = mode->hsync_end - mode->hsync_start;
-	timing->right_margin = mode->htotal - mode->hsync_end;
+	timing->left_margin = mode->htotal - mode->hsync_end;
 
 	timing->yres = mode->vdisplay;
-	timing->upper_margin = mode->vsync_start - mode->vdisplay;
+	timing->lower_margin = mode->vsync_start - mode->vdisplay;
 	timing->vsync_len = mode->vsync_end - mode->vsync_start;
-	timing->lower_margin = mode->vtotal - mode->vsync_end;
+	timing->upper_margin = mode->vtotal - mode->vsync_end;
 
 	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
 		timing->vmode = FB_VMODE_INTERLACED;
diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c
index 58820eb..09cc13f 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_drv.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
@@ -246,7 +246,7 @@
 	.remove		= __devexit_p(exynos_drm_platform_remove),
 	.driver		= {
 		.owner	= THIS_MODULE,
-		.name	= DRIVER_NAME,
+		.name	= "exynos-drm",
 	},
 };
 
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
index 3508700..54f8f07 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
@@ -46,39 +46,13 @@
 	struct exynos_drm_gem_obj	*exynos_gem_obj;
 };
 
-static int exynos_drm_fbdev_set_par(struct fb_info *info)
-{
-	struct fb_var_screeninfo *var = &info->var;
-
-	switch (var->bits_per_pixel) {
-	case 32:
-	case 24:
-	case 18:
-	case 16:
-	case 12:
-		info->fix.visual = FB_VISUAL_TRUECOLOR;
-		break;
-	case 1:
-		info->fix.visual = FB_VISUAL_MONO01;
-		break;
-	default:
-		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
-		break;
-	}
-
-	info->fix.line_length = (var->xres_virtual * var->bits_per_pixel) / 8;
-
-	return drm_fb_helper_set_par(info);
-}
-
-
 static struct fb_ops exynos_drm_fb_ops = {
 	.owner		= THIS_MODULE,
 	.fb_fillrect	= cfb_fillrect,
 	.fb_copyarea	= cfb_copyarea,
 	.fb_imageblit	= cfb_imageblit,
 	.fb_check_var	= drm_fb_helper_check_var,
-	.fb_set_par	= exynos_drm_fbdev_set_par,
+	.fb_set_par	= drm_fb_helper_set_par,
 	.fb_blank	= drm_fb_helper_blank,
 	.fb_pan_display	= drm_fb_helper_pan_display,
 	.fb_setcmap	= drm_fb_helper_setcmap,
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
index 360adf2..56458ee 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
@@ -817,8 +817,6 @@
 		goto err_clk_get;
 	}
 
-	clk_enable(ctx->bus_clk);
-
 	ctx->lcd_clk = clk_get(dev, "sclk_fimd");
 	if (IS_ERR(ctx->lcd_clk)) {
 		dev_err(dev, "failed to get lcd clock\n");
@@ -826,8 +824,6 @@
 		goto err_bus_clk;
 	}
 
-	clk_enable(ctx->lcd_clk);
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(dev, "failed to find registers\n");
@@ -864,17 +860,11 @@
 		goto err_req_irq;
 	}
 
-	ctx->clkdiv = fimd_calc_clkdiv(ctx, &panel->timing);
 	ctx->vidcon0 = pdata->vidcon0;
 	ctx->vidcon1 = pdata->vidcon1;
 	ctx->default_win = pdata->default_win;
 	ctx->panel = panel;
 
-	panel->timing.pixclock = clk_get_rate(ctx->lcd_clk) / ctx->clkdiv;
-
-	DRM_DEBUG_KMS("pixel clock = %d, clkdiv = %d\n",
-			panel->timing.pixclock, ctx->clkdiv);
-
 	subdrv = &ctx->subdrv;
 
 	subdrv->probe = fimd_subdrv_probe;
@@ -889,10 +879,15 @@
 
 	platform_set_drvdata(pdev, ctx);
 
-	pm_runtime_set_active(dev);
 	pm_runtime_enable(dev);
 	pm_runtime_get_sync(dev);
 
+	ctx->clkdiv = fimd_calc_clkdiv(ctx, &panel->timing);
+	panel->timing.pixclock = clk_get_rate(ctx->lcd_clk) / ctx->clkdiv;
+
+	DRM_DEBUG_KMS("pixel clock = %d, clkdiv = %d\n",
+			panel->timing.pixclock, ctx->clkdiv);
+
 	for (win = 0; win < WINDOWS_NR; win++)
 		fimd_clear_win(ctx, win);
 
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 03c53fc..558ac71 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2689,7 +2689,7 @@
 #define   DVS_FORMAT_RGBX888	(2<<25)
 #define   DVS_FORMAT_RGBX161616	(3<<25)
 #define   DVS_SOURCE_KEY	(1<<22)
-#define   DVS_RGB_ORDER_RGBX	(1<<20)
+#define   DVS_RGB_ORDER_XBGR	(1<<20)
 #define   DVS_YUV_BYTE_ORDER_MASK (3<<16)
 #define   DVS_YUV_ORDER_YUYV	(0<<16)
 #define   DVS_YUV_ORDER_UYVY	(1<<16)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index f851db7..397087c 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -7828,6 +7828,7 @@
 	case DRM_FORMAT_RGB332:
 	case DRM_FORMAT_RGB565:
 	case DRM_FORMAT_XRGB8888:
+	case DRM_FORMAT_XBGR8888:
 	case DRM_FORMAT_ARGB8888:
 	case DRM_FORMAT_XRGB2101010:
 	case DRM_FORMAT_ARGB2101010:
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 2288abf..a083504 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -225,16 +225,16 @@
 
 	/* Mask out pixel format bits in case we change it */
 	dvscntr &= ~DVS_PIXFORMAT_MASK;
-	dvscntr &= ~DVS_RGB_ORDER_RGBX;
+	dvscntr &= ~DVS_RGB_ORDER_XBGR;
 	dvscntr &= ~DVS_YUV_BYTE_ORDER_MASK;
 
 	switch (fb->pixel_format) {
 	case DRM_FORMAT_XBGR8888:
-		dvscntr |= DVS_FORMAT_RGBX888;
+		dvscntr |= DVS_FORMAT_RGBX888 | DVS_RGB_ORDER_XBGR;
 		pixel_size = 4;
 		break;
 	case DRM_FORMAT_XRGB8888:
-		dvscntr |= DVS_FORMAT_RGBX888 | DVS_RGB_ORDER_RGBX;
+		dvscntr |= DVS_FORMAT_RGBX888;
 		pixel_size = 4;
 		break;
 	case DRM_FORMAT_YUYV:
diff --git a/drivers/hwmon/pmbus/zl6100.c b/drivers/hwmon/pmbus/zl6100.c
index 880b90c..e3e8420 100644
--- a/drivers/hwmon/pmbus/zl6100.c
+++ b/drivers/hwmon/pmbus/zl6100.c
@@ -200,17 +200,11 @@
 	data->id = mid->driver_data;
 
 	/*
-	 * ZL2005, ZL2008, ZL2105, and ZL6100 are known to require a wait time
-	 * between I2C accesses. ZL2004 and ZL6105 are known to be safe.
-	 * Other chips have not yet been tested.
-	 *
-	 * Only clear the wait time for chips known to be safe. The wait time
-	 * can be cleared later for additional chips if tests show that it
-	 * is not needed (in other words, better be safe than sorry).
+	 * According to information from the chip vendor, all currently
+	 * supported chips are known to require a wait time between I2C
+	 * accesses.
 	 */
 	data->delay = delay;
-	if (data->id == zl2004 || data->id == zl6105)
-		data->delay = 0;
 
 	/*
 	 * Since there was a direct I2C device access above, wait before
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index 5276d19..a658d62 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -39,7 +39,7 @@
 					       0x8860 0xa1
     w83627dhg    9      5       4       3      0xa020 0xc1    0x5ca3
     w83627dhg-p  9      5       4       3      0xb070 0xc1    0x5ca3
-    w83627uhg    8      2       2       2      0xa230 0xc1    0x5ca3
+    w83627uhg    8      2       2       3      0xa230 0xc1    0x5ca3
     w83667hg     9      5       3       3      0xa510 0xc1    0x5ca3
     w83667hg-b   9      5       3       4      0xb350 0xc1    0x5ca3
     nct6775f     9      4       3       9      0xb470 0xc1    0x5ca3
@@ -1607,7 +1607,7 @@
 	val = step_time_to_reg(val, data->pwm_mode[nr]); \
 	mutex_lock(&data->update_lock); \
 	data->reg[nr] = val; \
-	w83627ehf_write_value(data, W83627EHF_REG_##REG[nr], val); \
+	w83627ehf_write_value(data, data->REG_##REG[nr], val); \
 	mutex_unlock(&data->update_lock); \
 	return count; \
 } \
@@ -2004,7 +2004,8 @@
 		goto exit;
 	}
 
-	data = kzalloc(sizeof(struct w83627ehf_data), GFP_KERNEL);
+	data = devm_kzalloc(&pdev->dev, sizeof(struct w83627ehf_data),
+			    GFP_KERNEL);
 	if (!data) {
 		err = -ENOMEM;
 		goto exit_release;
@@ -2157,16 +2158,16 @@
 		w83627ehf_set_temp_reg_ehf(data, 3);
 
 		/*
-		 * Temperature sources for temp1 and temp2 are selected with
+		 * Temperature sources for temp2 and temp3 are selected with
 		 * bank 0, registers 0x49 and 0x4a.
 		 */
 		data->temp_src[0] = 0;	/* SYSTIN */
 		reg = w83627ehf_read_value(data, 0x49) & 0x07;
 		/* Adjust to have the same mapping as other source registers */
 		if (reg == 0)
-			data->temp_src[1]++;
+			data->temp_src[1] = 1;
 		else if (reg >= 2 && reg <= 5)
-			data->temp_src[1] += 2;
+			data->temp_src[1] = reg + 2;
 		else	/* should never happen */
 			data->have_temp &= ~(1 << 1);
 		reg = w83627ehf_read_value(data, 0x4a);
@@ -2493,9 +2494,8 @@
 
 exit_remove:
 	w83627ehf_device_remove_files(dev);
-	kfree(data);
-	platform_set_drvdata(pdev, NULL);
 exit_release:
+	platform_set_drvdata(pdev, NULL);
 	release_region(res->start, IOREGION_LENGTH);
 exit:
 	return err;
@@ -2509,7 +2509,6 @@
 	w83627ehf_device_remove_files(&pdev->dev);
 	release_region(data->addr, IOREGION_LENGTH);
 	platform_set_drvdata(pdev, NULL);
-	kfree(data);
 
 	return 0;
 }
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index 525c734..24f94f4 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -103,8 +103,14 @@
 		 * chips may hold it low ("clock stretching") while they
 		 * are processing data internally.
 		 */
-		if (time_after(jiffies, start + adap->timeout))
+		if (time_after(jiffies, start + adap->timeout)) {
+			/* Test one last time, as we may have been preempted
+			 * between last check and timeout test.
+			 */
+			if (getscl(adap))
+				break;
 			return -ETIMEDOUT;
+		}
 		cond_resched();
 	}
 #ifdef DEBUG
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 1e56061..e9c1893 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -1386,8 +1386,10 @@
 
 	ret = i2c_transfer(adap, &msg, 1);
 
-	/* If everything went ok (i.e. 1 msg transmitted), return #bytes
-	   transmitted, else error code. */
+	/*
+	 * If everything went ok (i.e. 1 msg transmitted), return #bytes
+	 * transmitted, else error code.
+	 */
 	return (ret == 1) ? count : ret;
 }
 EXPORT_SYMBOL(i2c_master_send);
@@ -1414,8 +1416,10 @@
 
 	ret = i2c_transfer(adap, &msg, 1);
 
-	/* If everything went ok (i.e. 1 msg transmitted), return #bytes
-	   transmitted, else error code. */
+	/*
+	 * If everything went ok (i.e. 1 msg received), return #bytes received,
+	 * else error code.
+	 */
 	return (ret == 1) ? count : ret;
 }
 EXPORT_SYMBOL(i2c_master_recv);
diff --git a/drivers/media/dvb/siano/smsdvb.c b/drivers/media/dvb/siano/smsdvb.c
index 654685c..aa77e54 100644
--- a/drivers/media/dvb/siano/smsdvb.c
+++ b/drivers/media/dvb/siano/smsdvb.c
@@ -49,9 +49,6 @@
 
 	struct completion       tune_done;
 
-	/* todo: save freq/band instead whole struct */
-	struct dtv_frontend_properties fe_params;
-
 	struct SMSHOSTLIB_STATISTICS_DVB_S sms_stat_dvb;
 	int event_fe_state;
 	int event_unc_state;
@@ -744,12 +741,124 @@
 	struct dtv_frontend_properties *fep = &fe->dtv_property_cache;
 	struct smsdvb_client_t *client =
 		container_of(fe, struct smsdvb_client_t, frontend);
+	struct smscore_device_t *coredev = client->coredev;
+	struct TRANSMISSION_STATISTICS_S *td =
+		&client->sms_stat_dvb.TransmissionData;
 
-	sms_debug("");
+	switch (smscore_get_device_mode(coredev)) {
+	case DEVICE_MODE_DVBT:
+	case DEVICE_MODE_DVBT_BDA:
+		fep->frequency = td->Frequency;
 
-	/* todo: */
-	memcpy(fep, &client->fe_params,
-	       sizeof(struct dtv_frontend_properties));
+		switch (td->Bandwidth) {
+		case 6:
+			fep->bandwidth_hz = 6000000;
+			break;
+		case 7:
+			fep->bandwidth_hz = 7000000;
+			break;
+		case 8:
+			fep->bandwidth_hz = 8000000;
+			break;
+		}
+
+		switch (td->TransmissionMode) {
+		case 2:
+			fep->transmission_mode = TRANSMISSION_MODE_2K;
+			break;
+		case 8:
+			fep->transmission_mode = TRANSMISSION_MODE_8K;
+		}
+
+		switch (td->GuardInterval) {
+		case 0:
+			fep->guard_interval = GUARD_INTERVAL_1_32;
+			break;
+		case 1:
+			fep->guard_interval = GUARD_INTERVAL_1_16;
+			break;
+		case 2:
+			fep->guard_interval = GUARD_INTERVAL_1_8;
+			break;
+		case 3:
+			fep->guard_interval = GUARD_INTERVAL_1_4;
+			break;
+		}
+
+		switch (td->CodeRate) {
+		case 0:
+			fep->code_rate_HP = FEC_1_2;
+			break;
+		case 1:
+			fep->code_rate_HP = FEC_2_3;
+			break;
+		case 2:
+			fep->code_rate_HP = FEC_3_4;
+			break;
+		case 3:
+			fep->code_rate_HP = FEC_5_6;
+			break;
+		case 4:
+			fep->code_rate_HP = FEC_7_8;
+			break;
+		}
+
+		switch (td->LPCodeRate) {
+		case 0:
+			fep->code_rate_LP = FEC_1_2;
+			break;
+		case 1:
+			fep->code_rate_LP = FEC_2_3;
+			break;
+		case 2:
+			fep->code_rate_LP = FEC_3_4;
+			break;
+		case 3:
+			fep->code_rate_LP = FEC_5_6;
+			break;
+		case 4:
+			fep->code_rate_LP = FEC_7_8;
+			break;
+		}
+
+		switch (td->Constellation) {
+		case 0:
+			fep->modulation = QPSK;
+			break;
+		case 1:
+			fep->modulation = QAM_16;
+			break;
+		case 2:
+			fep->modulation = QAM_64;
+			break;
+		}
+
+		switch (td->Hierarchy) {
+		case 0:
+			fep->hierarchy = HIERARCHY_NONE;
+			break;
+		case 1:
+			fep->hierarchy = HIERARCHY_1;
+			break;
+		case 2:
+			fep->hierarchy = HIERARCHY_2;
+			break;
+		case 3:
+			fep->hierarchy = HIERARCHY_4;
+			break;
+		}
+
+		fep->inversion = INVERSION_AUTO;
+		break;
+	case DEVICE_MODE_ISDBT:
+	case DEVICE_MODE_ISDBT_BDA:
+		fep->frequency = td->Frequency;
+		fep->bandwidth_hz = 6000000;
+		/* todo: retrive the other parameters */
+		break;
+	default:
+		return -EINVAL;
+	}
 
 	return 0;
 }
@@ -872,11 +981,11 @@
 	switch (smscore_get_device_mode(coredev)) {
 	case DEVICE_MODE_DVBT:
 	case DEVICE_MODE_DVBT_BDA:
-		smsdvb_fe_ops.delsys[0] = SYS_DVBT;
+		client->frontend.ops.delsys[0] = SYS_DVBT;
 		break;
 	case DEVICE_MODE_ISDBT:
 	case DEVICE_MODE_ISDBT_BDA:
-		smsdvb_fe_ops.delsys[0] = SYS_ISDBT;
+		client->frontend.ops.delsys[0] = SYS_ISDBT;
 		break;
 	}
 
diff --git a/drivers/media/video/davinci/isif.c b/drivers/media/video/davinci/isif.c
index 1e63852..5278fe7 100644
--- a/drivers/media/video/davinci/isif.c
+++ b/drivers/media/video/davinci/isif.c
@@ -34,6 +34,7 @@
 #include <linux/videodev2.h>
 #include <linux/clk.h>
 #include <linux/err.h>
+#include <linux/module.h>
 
 #include <mach/mux.h>
 
diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c
index c7e69b8..4a44f9a 100644
--- a/drivers/media/video/uvc/uvc_video.c
+++ b/drivers/media/video/uvc/uvc_video.c
@@ -611,9 +611,11 @@
 	delta_stc = buf->pts - (1UL << 31);
 	x1 = first->dev_stc - delta_stc;
 	x2 = last->dev_stc - delta_stc;
+	if (x1 == x2)
+		goto done;
+
 	y1 = (first->dev_sof + 2048) << 16;
 	y2 = (last->dev_sof + 2048) << 16;
-
 	if (y2 < y1)
 		y2 += 2048 << 16;
 
@@ -631,14 +633,16 @@
 		  x1, x2, y1, y2, clock->sof_offset);
 
 	/* Second step, SOF to host clock conversion. */
-	ts = timespec_sub(last->host_ts, first->host_ts);
 	x1 = (uvc_video_clock_host_sof(first) + 2048) << 16;
 	x2 = (uvc_video_clock_host_sof(last) + 2048) << 16;
-	y1 = NSEC_PER_SEC;
-	y2 = (ts.tv_sec + 1) * NSEC_PER_SEC + ts.tv_nsec;
-
 	if (x2 < x1)
 		x2 += 2048 << 16;
+	if (x1 == x2)
+		goto done;
+
+	ts = timespec_sub(last->host_ts, first->host_ts);
+	y1 = NSEC_PER_SEC;
+	y2 = (ts.tv_sec + 1) * NSEC_PER_SEC + ts.tv_nsec;
 
 	/* Interpolated and host SOF timestamps can wrap around at slightly
 	 * different times. Handle this by adding or removing 2048 to or from
diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c
index 4426290..501b27c 100644
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -1028,7 +1028,7 @@
 		return iscsit_add_reject_from_cmd(
 				ISCSI_REASON_BOOKMARK_NO_RESOURCES,
 				1, 1, buf, cmd);
-	} else if (transport_ret == -EINVAL) {
+	} else if (transport_ret < 0) {
 		/*
 		 * Unsupported SAM Opcode.  CHECK_CONDITION will be sent
 		 * in iscsit_execute_cmd() during the CmdSN OOO Execution
diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c
index b7c7793..63e703b 100644
--- a/drivers/target/target_core_pr.c
+++ b/drivers/target/target_core_pr.c
@@ -117,7 +117,7 @@
 					struct se_node_acl *, struct se_session *);
 static void core_scsi3_put_pr_reg(struct t10_pr_registration *);
 
-static int target_check_scsi2_reservation_conflict(struct se_cmd *cmd, int *ret)
+static int target_check_scsi2_reservation_conflict(struct se_cmd *cmd)
 {
 	struct se_session *se_sess = cmd->se_sess;
 	struct se_subsystem_dev *su_dev = cmd->se_dev->se_sub_dev;
@@ -127,7 +127,7 @@
 	int conflict = 0;
 
 	if (!crh)
-		return false;
+		return -EINVAL;
 
 	pr_reg = core_scsi3_locate_pr_reg(cmd->se_dev, se_sess->se_node_acl,
 			se_sess);
@@ -155,16 +155,14 @@
 		 */
 		if (pr_reg->pr_res_holder) {
 			core_scsi3_put_pr_reg(pr_reg);
-			*ret = 0;
-			return false;
+			return 1;
 		}
 		if ((pr_reg->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_REGONLY) ||
 		    (pr_reg->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_REGONLY) ||
 		    (pr_reg->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) ||
 		    (pr_reg->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG)) {
 			core_scsi3_put_pr_reg(pr_reg);
-			*ret = 0;
-			return true;
+			return 1;
 		}
 		core_scsi3_put_pr_reg(pr_reg);
 		conflict = 1;
@@ -189,10 +187,10 @@
 			" while active SPC-3 registrations exist,"
 			" returning RESERVATION_CONFLICT\n");
 		cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT;
-		return true;
+		return -EBUSY;
 	}
 
-	return false;
+	return 0;
 }
 
 int target_scsi2_reservation_release(struct se_task *task)
@@ -201,12 +199,18 @@
 	struct se_device *dev = cmd->se_dev;
 	struct se_session *sess = cmd->se_sess;
 	struct se_portal_group *tpg = sess->se_tpg;
-	int ret = 0;
+	int ret = 0, rc;
 
 	if (!sess || !tpg)
 		goto out;
-	if (target_check_scsi2_reservation_conflict(cmd, &ret))
+	rc = target_check_scsi2_reservation_conflict(cmd);
+	if (rc == 1)
 		goto out;
+	else if (rc < 0) {
+		cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT;
+		ret = -EINVAL;
+		goto out;
+	}
 
 	ret = 0;
 	spin_lock(&dev->dev_reservation_lock);
@@ -243,7 +247,7 @@
 	struct se_device *dev = cmd->se_dev;
 	struct se_session *sess = cmd->se_sess;
 	struct se_portal_group *tpg = sess->se_tpg;
-	int ret = 0;
+	int ret = 0, rc;
 
 	if ((cmd->t_task_cdb[1] & 0x01) &&
 	    (cmd->t_task_cdb[1] & 0x02)) {
@@ -259,8 +263,14 @@
 	 */
 	if (!sess || !tpg)
 		goto out;
-	if (target_check_scsi2_reservation_conflict(cmd, &ret))
+	rc = target_check_scsi2_reservation_conflict(cmd);
+	if (rc == 1)
 		goto out;
+	else if (rc < 0) {
+		cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT;
+		ret = -EINVAL;
+		goto out;
+	}
 
 	ret = 0;
 	spin_lock(&dev->dev_reservation_lock);
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 58cea07..cd5cd95 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -2539,6 +2539,7 @@
 					cmd, cdb, pr_reg_type) != 0) {
 			cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
 			cmd->se_cmd_flags |= SCF_SCSI_RESERVATION_CONFLICT;
+			cmd->scsi_status = SAM_STAT_RESERVATION_CONFLICT;
 			cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT;
 			return -EBUSY;
 		}