e1000e: avoid polling h/w registers during link negotiation
Avoid touching hardware registers when possible, otherwise link negotiation
can get messed up when user-level scripts are rapidly polling the driver to
see if/when link is up. Use the saved link state information instead when
possible.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index db86850..77c5829 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -118,7 +118,6 @@
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- u32 status;
if (hw->phy.media_type == e1000_media_type_copper) {
@@ -156,22 +155,29 @@
ecmd->transceiver = XCVR_EXTERNAL;
}
- status = er32(STATUS);
- if (status & E1000_STATUS_LU) {
- if (status & E1000_STATUS_SPEED_1000)
- ecmd->speed = 1000;
- else if (status & E1000_STATUS_SPEED_100)
- ecmd->speed = 100;
- else
- ecmd->speed = 10;
+ ecmd->speed = -1;
+ ecmd->duplex = -1;
- if (status & E1000_STATUS_FD)
- ecmd->duplex = DUPLEX_FULL;
- else
- ecmd->duplex = DUPLEX_HALF;
+ if (netif_running(netdev)) {
+ if (netif_carrier_ok(netdev)) {
+ ecmd->speed = adapter->link_speed;
+ ecmd->duplex = adapter->link_duplex - 1;
+ }
} else {
- ecmd->speed = -1;
- ecmd->duplex = -1;
+ u32 status = er32(STATUS);
+ if (status & E1000_STATUS_LU) {
+ if (status & E1000_STATUS_SPEED_1000)
+ ecmd->speed = 1000;
+ else if (status & E1000_STATUS_SPEED_100)
+ ecmd->speed = 100;
+ else
+ ecmd->speed = 10;
+
+ if (status & E1000_STATUS_FD)
+ ecmd->duplex = DUPLEX_FULL;
+ else
+ ecmd->duplex = DUPLEX_HALF;
+ }
}
ecmd->autoneg = ((hw->phy.media_type == e1000_media_type_fiber) ||
@@ -179,7 +185,7 @@
/* MDI-X => 2; MDI =>1; Invalid =>0 */
if ((hw->phy.media_type == e1000_media_type_copper) &&
- !hw->mac.get_link_status)
+ netif_carrier_ok(netdev))
ecmd->eth_tp_mdix = hw->phy.is_mdix ? ETH_TP_MDI_X :
ETH_TP_MDI;
else
@@ -191,19 +197,15 @@
static u32 e1000_get_link(struct net_device *netdev)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_mac_info *mac = &adapter->hw.mac;
+ struct e1000_hw *hw = &adapter->hw;
/*
- * If the link is not reported up to netdev, interrupts are disabled,
- * and so the physical link state may have changed since we last
- * looked. Set get_link_status to make sure that the true link
- * state is interrogated, rather than pulling a cached and possibly
- * stale link state from the driver.
+ * Avoid touching hardware registers when possible, otherwise
+ * link negotiation can get messed up when user-level scripts
+ * are rapidly polling the driver to see if link is up.
*/
- if (!netif_carrier_ok(netdev))
- mac->get_link_status = 1;
-
- return e1000e_has_link(adapter);
+ return netif_running(netdev) ? netif_carrier_ok(netdev) :
+ !!(er32(STATUS) & E1000_STATUS_LU);
}
static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)