usb: Support USB 3.1 extended port status request
usb 3.1 extend the hub get-port-status request by adding different
request types. the new request types return 4 additional bytes called
extended port status, these bytes are returned after the regular
portstatus and portchange values.
The extended port status contains a speed ID for the currently used
sublink speed. A table of supported Speed IDs with details about the link
is provided by the hub in the device descriptor BOS SuperSpeedPlus
device capability Sublink Speed Attributes.
Support this new request. Ask for the extended port status after port
reset if hub supports USB 3.1. If link is running at SuperSpeedPlus
set the device speed to USB_SPEED_SUPER_PLUS
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 6bdff0a..3c9b22e 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -537,29 +537,34 @@
/*
* USB 2.0 spec Section 11.24.2.7
+ * USB 3.1 takes into use the wValue and wLength fields, spec Section 10.16.2.6
*/
static int get_port_status(struct usb_device *hdev, int port1,
- struct usb_port_status *data)
+ void *data, u16 value, u16 length)
{
int i, status = -ETIMEDOUT;
for (i = 0; i < USB_STS_RETRIES &&
(status == -ETIMEDOUT || status == -EPIPE); i++) {
status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
- USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, port1,
- data, sizeof(*data), USB_STS_TIMEOUT);
+ USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, value,
+ port1, data, length, USB_STS_TIMEOUT);
}
return status;
}
-static int hub_port_status(struct usb_hub *hub, int port1,
- u16 *status, u16 *change)
+static int hub_ext_port_status(struct usb_hub *hub, int port1, int type,
+ u16 *status, u16 *change, u32 *ext_status)
{
int ret;
+ int len = 4;
+
+ if (type != HUB_PORT_STATUS)
+ len = 8;
mutex_lock(&hub->status_mutex);
- ret = get_port_status(hub->hdev, port1, &hub->status->port);
- if (ret < 4) {
+ ret = get_port_status(hub->hdev, port1, &hub->status->port, type, len);
+ if (ret < len) {
if (ret != -ENODEV)
dev_err(hub->intfdev,
"%s failed (err = %d)\n", __func__, ret);
@@ -568,13 +573,22 @@
} else {
*status = le16_to_cpu(hub->status->port.wPortStatus);
*change = le16_to_cpu(hub->status->port.wPortChange);
-
+ if (type != HUB_PORT_STATUS && ext_status)
+ *ext_status = le32_to_cpu(
+ hub->status->port.dwExtPortStatus);
ret = 0;
}
mutex_unlock(&hub->status_mutex);
return ret;
}
+static int hub_port_status(struct usb_hub *hub, int port1,
+ u16 *status, u16 *change)
+{
+ return hub_ext_port_status(hub, port1, HUB_PORT_STATUS,
+ status, change, NULL);
+}
+
static void kick_hub_wq(struct usb_hub *hub)
{
struct usb_interface *intf;
@@ -2612,6 +2626,32 @@
return result;
}
+/*
+ * Return 1 if port speed is SuperSpeedPlus, 0 otherwise
+ * check it from the link protocol field of the current speed ID attribute.
+ * current speed ID is got from ext port status request. Sublink speed attribute
+ * table is returned with the hub BOS SSP device capability descriptor
+ */
+static int port_speed_is_ssp(struct usb_device *hdev, int speed_id)
+{
+ int ssa_count;
+ u32 ss_attr;
+ int i;
+ struct usb_ssp_cap_descriptor *ssp_cap = hdev->bos->ssp_cap;
+
+ if (!ssp_cap)
+ return 0;
+
+ ssa_count = le32_to_cpu(ssp_cap->bmAttributes) &
+ USB_SSP_SUBLINK_SPEED_ATTRIBS;
+
+ for (i = 0; i <= ssa_count; i++) {
+ ss_attr = le32_to_cpu(ssp_cap->bmSublinkSpeedAttr[i]);
+ if (speed_id == (ss_attr & USB_SSP_SUBLINK_SPEED_SSID))
+ return !!(ss_attr & USB_SSP_SUBLINK_SPEED_LP);
+ }
+ return 0;
+}
/* Returns 1 if @hub is a WUSB root hub, 0 otherwise */
static unsigned hub_is_wusb(struct usb_hub *hub)
@@ -2676,6 +2716,7 @@
int delay_time, ret;
u16 portstatus;
u16 portchange;
+ u32 ext_portstatus = 0;
for (delay_time = 0;
delay_time < HUB_RESET_TIMEOUT;
@@ -2684,7 +2725,14 @@
msleep(delay);
/* read and decode port status */
- ret = hub_port_status(hub, port1, &portstatus, &portchange);
+ if (hub_is_superspeedplus(hub->hdev))
+ ret = hub_ext_port_status(hub, port1,
+ HUB_EXT_PORT_STATUS,
+ &portstatus, &portchange,
+ &ext_portstatus);
+ else
+ ret = hub_port_status(hub, port1, &portstatus,
+ &portchange);
if (ret < 0)
return ret;
@@ -2727,6 +2775,10 @@
if (hub_is_wusb(hub))
udev->speed = USB_SPEED_WIRELESS;
+ else if (hub_is_superspeedplus(hub->hdev) &&
+ port_speed_is_ssp(hub->hdev, ext_portstatus &
+ USB_EXT_PORT_STAT_RX_SPEED_ID))
+ udev->speed = USB_SPEED_SUPER_PLUS;
else if (hub_is_superspeed(hub->hdev))
udev->speed = USB_SPEED_SUPER;
else if (portstatus & USB_PORT_STAT_HIGH_SPEED)