[media] siano: get rid of sms_info()
On most cases, sms_info() should actually be pr_debug(), but,
on other places, it should be pr_info().
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
diff --git a/drivers/media/common/siano/smscoreapi.c b/drivers/media/common/siano/smscoreapi.c
index e5bde84..36b44ce 100644
--- a/drivers/media/common/siano/smscoreapi.c
+++ b/drivers/media/common/siano/smscoreapi.c
@@ -636,10 +636,8 @@
struct smscore_buffer_t *cb;
cb = kzalloc(sizeof(struct smscore_buffer_t), GFP_KERNEL);
- if (!cb) {
- sms_info("kzalloc(...) failed");
+ if (!cb)
return NULL;
- }
cb->p = buffer;
cb->offset_in_common = buffer - (u8 *) common_buffer;
@@ -665,10 +663,8 @@
u8 *buffer;
dev = kzalloc(sizeof(struct smscore_device_t), GFP_KERNEL);
- if (!dev) {
- sms_info("kzalloc(...) failed");
+ if (!dev)
return -ENOMEM;
- }
/* init list entry so it could be safe in smscore_unregister_device */
INIT_LIST_HEAD(&dev->entry);
@@ -723,7 +719,7 @@
smscore_putbuffer(dev, cb);
}
- sms_info("allocated %d buffers", dev->num_buffers);
+ pr_debug("allocated %d buffers\n", dev->num_buffers);
dev->mode = DEVICE_MODE_NONE;
dev->board_id = SMS_BOARD_UNKNOWN;
@@ -747,7 +743,7 @@
*coredev = dev;
- sms_info("device %p created", dev);
+ pr_debug("device %p created\n", dev);
return 0;
}
@@ -764,7 +760,7 @@
rc = coredev->sendrequest_handler(coredev->context, buffer, size);
if (rc < 0) {
- sms_info("sendrequest returned error %d", rc);
+ pr_info("sendrequest returned error %d\n", rc);
return rc;
}
@@ -787,7 +783,7 @@
coredev->ir.dev = NULL;
ir_io = sms_get_board(smscore_get_board_id(coredev))->board_cfg.ir;
if (ir_io) {/* only if IR port exist we use IR sub-module */
- sms_info("IR loading");
+ pr_debug("IR loading\n");
rc = sms_ir_init(coredev);
if (rc != 0)
@@ -816,7 +812,7 @@
pr_err("Sending IR initialization message failed\n");
}
} else
- sms_info("IR port has not been detected");
+ pr_info("IR port has not been detected\n");
return 0;
}
@@ -890,12 +886,12 @@
rc = smscore_set_device_mode(coredev, mode);
if (rc < 0) {
- sms_info("set device mode faile , rc %d", rc);
+ pr_info("set device mode failed , rc %d\n", rc);
return rc;
}
rc = smscore_configure_board(coredev);
if (rc < 0) {
- sms_info("configure board failed , rc %d", rc);
+ pr_info("configure board failed , rc %d\n", rc);
return rc;
}
@@ -904,7 +900,7 @@
rc = smscore_notify_callbacks(coredev, coredev->device, 1);
smscore_init_ir(coredev);
- sms_info("device %p started, rc %d", coredev, rc);
+ pr_debug("device %p started, rc %d\n", coredev, rc);
kmutex_unlock(&g_smscore_deviceslock);
@@ -927,7 +923,7 @@
mem_address = firmware->start_address;
- sms_info("loading FW to addr 0x%x size %d",
+ pr_debug("loading FW to addr 0x%x size %d\n",
mem_address, firmware->length);
if (coredev->preload_handler) {
rc = coredev->preload_handler(coredev->context);
@@ -1169,7 +1165,7 @@
pr_err("failed to open firmware file '%s'\n", fw_filename);
return rc;
}
- sms_info("read fw %s, buffer size=0x%zx", fw_filename, fw->size);
+ pr_debug("read fw %s, buffer size=0x%zx\n", fw_filename, fw->size);
fw_buf = kmalloc(ALIGN(fw->size, SMS_ALLOC_ALIGNMENT),
GFP_KERNEL | GFP_DMA);
if (!fw_buf) {
@@ -1227,18 +1223,18 @@
if (num_buffers == coredev->num_buffers)
break;
if (++retry > 10) {
- sms_info("exiting although not all buffers released.");
+ pr_info("exiting although not all buffers released.\n");
break;
}
- sms_info("waiting for %d buffer(s)",
+ pr_debug("waiting for %d buffer(s)\n",
coredev->num_buffers - num_buffers);
kmutex_unlock(&g_smscore_deviceslock);
msleep(100);
kmutex_lock(&g_smscore_deviceslock);
}
- sms_info("freed %d buffers", num_buffers);
+ pr_debug("freed %d buffers\n", num_buffers);
if (coredev->common_buffer)
dma_free_coherent(NULL, coredev->common_buffer_size,
@@ -1251,7 +1247,7 @@
kmutex_unlock(&g_smscore_deviceslock);
- sms_info("device %p destroyed", coredev);
+ pr_debug("device %p destroyed\n", coredev);
}
EXPORT_SYMBOL_GPL(smscore_unregister_device);
@@ -1358,7 +1354,7 @@
}
if (coredev->mode == mode) {
- sms_info("device mode %d already set", mode);
+ pr_debug("device mode %d already set\n", mode);
return 0;
}
@@ -1366,9 +1362,9 @@
rc = smscore_load_firmware_from_file(coredev,
mode, NULL);
if (rc >= 0)
- sms_info("firmware download success");
+ pr_debug("firmware download success\n");
} else {
- sms_info("mode %d is already supported by running firmware",
+ pr_debug("mode %d is already supported by running firmware\n",
mode);
}
if (coredev->fw_version >= 0x800) {
@@ -1776,7 +1772,7 @@
kfree(identry);
}
- sms_info("%p", client->context);
+ pr_debug("%p\n", client->context);
list_del(&client->entry);
kfree(client);
diff --git a/drivers/media/common/siano/smscoreapi.h b/drivers/media/common/siano/smscoreapi.h
index ef73568..6ff8f64 100644
--- a/drivers/media/common/siano/smscoreapi.h
+++ b/drivers/media/common/siano/smscoreapi.h
@@ -1176,12 +1176,4 @@
/* ------------------------------------------------------------------------ */
-#define DBG_INFO 1
-#define DBG_ADV 2
-
-#define sms_info(fmt, arg...) do {\
- if (sms_dbg & DBG_INFO) \
- pr_info(fmt "\n", ##arg); \
-} while (0)
-
#endif /* __SMS_CORE_API_H__ */
diff --git a/drivers/media/common/siano/smsdvb-main.c b/drivers/media/common/siano/smsdvb-main.c
index 9dd3108..e65fba1 100644
--- a/drivers/media/common/siano/smsdvb-main.c
+++ b/drivers/media/common/siano/smsdvb-main.c
@@ -591,7 +591,7 @@
is_status_update = true;
break;
default:
- sms_info("message not handled");
+ pr_debug("message not handled\n");
}
smscore_putbuffer(client->coredev, cb);
@@ -884,7 +884,7 @@
msg.Data[0] = c->frequency;
msg.Data[2] = 12000000;
- sms_info("%s: freq %d band %d", __func__, c->frequency,
+ pr_debug("%s: freq %d band %d\n", __func__, c->frequency,
c->bandwidth_hz);
switch (c->bandwidth_hz / 1000000) {
@@ -969,7 +969,7 @@
c->bandwidth_hz = 6000000;
- sms_info("%s: freq %d segwidth %d segindex %d", __func__,
+ pr_debug("freq %d segwidth %d segindex %d\n",
c->frequency, c->isdbt_sb_segment_count,
c->isdbt_sb_segment_idx);
@@ -1185,11 +1185,11 @@
client->event_unc_state = -1;
sms_board_dvb3_event(client, DVB3_EVENT_HOTPLUG);
- sms_info("success");
+ pr_debug("success\n");
sms_board_setup(coredev);
if (smsdvb_debugfs_create(client) < 0)
- sms_info("failed to create debugfs node");
+ pr_info("failed to create debugfs node\n");
dvb_create_media_graph(coredev->media_dev);
diff --git a/drivers/media/usb/siano/smsusb.c b/drivers/media/usb/siano/smsusb.c
index 192cfd7..412052f 100644
--- a/drivers/media/usb/siano/smsusb.c
+++ b/drivers/media/usb/siano/smsusb.c
@@ -275,14 +275,14 @@
rc = usb_bulk_msg(udev, usb_sndbulkpipe(udev, 2),
fw_buffer, fw->size, &dummy, 1000);
- sms_info("sent %zu(%d) bytes, rc %d", fw->size, dummy, rc);
+ pr_debug("sent %zu(%d) bytes, rc %d\n", fw->size, dummy, rc);
kfree(fw_buffer);
} else {
pr_err("failed to allocate firmware buffer\n");
rc = -ENOMEM;
}
- sms_info("read FW %s, size=%zu", fw_filename, fw->size);
+ pr_debug("read FW %s, size=%zu\n", fw_filename, fw->size);
release_firmware(fw);
@@ -308,7 +308,7 @@
else if (strstr(product_string, "TDMB"))
*mode = 2;
- sms_info("%d \"%s\"", *mode, product_string);
+ pr_debug("%d \"%s\"\n", *mode, product_string);
}
static int smsusb1_setmode(void *context, int mode)
@@ -337,7 +337,7 @@
if (dev->coredev)
smscore_unregister_device(dev->coredev);
- sms_info("device 0x%p destroyed", dev);
+ pr_debug("device 0x%p destroyed\n", dev);
kfree(dev);
}
@@ -375,7 +375,7 @@
dev->coredev->media_dev = mdev;
- sms_info("media controller created");
+ pr_info("media controller created\n");
#endif
}
@@ -425,7 +425,7 @@
dev->out_ep = intf->cur_altsetting->endpoint[i].desc.bEndpointAddress;
}
- sms_info("in_ep = %02x, out_ep = %02x",
+ pr_debug("in_ep = %02x, out_ep = %02x\n",
dev->in_ep, dev->out_ep);
params.device = &dev->udev->dev;
@@ -453,7 +453,7 @@
usb_init_urb(&dev->surbs[i].urb);
}
- sms_info("smsusb_start_streaming(...).");
+ pr_debug("smsusb_start_streaming(...).\n");
rc = smsusb_start_streaming(dev);
if (rc < 0) {
pr_err("smsusb_start_streaming(...) failed\n");
@@ -470,7 +470,7 @@
return rc;
}
- sms_info("device 0x%p created", dev);
+ pr_debug("device 0x%p created\n", dev);
siano_media_device_register(dev);
return rc;
@@ -483,7 +483,7 @@
char devpath[32];
int i, rc;
- sms_info("board id=%lu, interface number %d",
+ pr_info("board id=%lu, interface number %d\n",
id->driver_info,
intf->cur_altsetting->desc.bInterfaceNumber);
@@ -505,10 +505,10 @@
}
}
- sms_info("smsusb_probe %d",
+ pr_debug("smsusb_probe %d\n",
intf->cur_altsetting->desc.bInterfaceNumber);
for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
- sms_info("endpoint %d %02x %02x %d", i,
+ pr_debug("endpoint %d %02x %02x %d\n", i,
intf->cur_altsetting->endpoint[i].desc.bEndpointAddress,
intf->cur_altsetting->endpoint[i].desc.bmAttributes,
intf->cur_altsetting->endpoint[i].desc.wMaxPacketSize);
@@ -531,14 +531,15 @@
snprintf(devpath, sizeof(devpath), "usb\\%d-%s",
udev->bus->busnum, udev->devpath);
- sms_info("stellar device in cold state was found at %s.", devpath);
+ pr_info("stellar device in cold state was found at %s.\n",
+ devpath);
rc = smsusb1_load_firmware(
udev, smscore_registry_getmode(devpath),
id->driver_info);
/* This device will reset and gain another USB ID */
if (!rc)
- sms_info("stellar device now in warm state");
+ pr_info("stellar device now in warm state\n");
else
pr_err("Failed to put stellar in warm state. Error: %d\n",
rc);
@@ -548,7 +549,7 @@
rc = smsusb_init_device(intf, id->driver_info);
}
- sms_info("Device initialized with return code %d", rc);
+ pr_info("Device initialized with return code %d\n", rc);
sms_board_load_modules(id->driver_info);
return rc;
}