ASoC: tlv320aic26: Remove direct use of internal I/O functions
Use the core to do I/O rather than directly calling the driver operations
in order to support further refactoring.
Signed-off-by: Mark Brown <broonie@linaro.org>
diff --git a/sound/soc/codecs/tlv320aic26.c b/sound/soc/codecs/tlv320aic26.c
index b192cd4..a4f9360 100644
--- a/sound/soc/codecs/tlv320aic26.c
+++ b/sound/soc/codecs/tlv320aic26.c
@@ -174,9 +174,9 @@
dev_dbg(&aic26->spi->dev, "Setting PLLM to %d.%04d\n", jval, dval);
qval = 0;
reg = 0x8000 | qval << 11 | pval << 8 | jval << 2;
- aic26_reg_write(codec, AIC26_REG_PLL_PROG1, reg);
+ snd_soc_write(codec, AIC26_REG_PLL_PROG1, reg);
reg = dval << 2;
- aic26_reg_write(codec, AIC26_REG_PLL_PROG2, reg);
+ snd_soc_write(codec, AIC26_REG_PLL_PROG2, reg);
/* Audio Control 3 (master mode, fsref rate) */
reg = aic26_reg_read_cache(codec, AIC26_REG_AUDIO_CTRL3);
@@ -185,13 +185,13 @@
reg |= 0x0800;
if (fsref == 48000)
reg |= 0x2000;
- aic26_reg_write(codec, AIC26_REG_AUDIO_CTRL3, reg);
+ snd_soc_write(codec, AIC26_REG_AUDIO_CTRL3, reg);
/* Audio Control 1 (FSref divisor) */
reg = aic26_reg_read_cache(codec, AIC26_REG_AUDIO_CTRL1);
reg &= ~0x0fff;
reg |= wlen | aic26->datfm | (divisor << 3) | divisor;
- aic26_reg_write(codec, AIC26_REG_AUDIO_CTRL1, reg);
+ snd_soc_write(codec, AIC26_REG_AUDIO_CTRL1, reg);
return 0;
}
@@ -212,7 +212,7 @@
reg |= 0x8080;
else
reg &= ~0x8080;
- aic26_reg_write(codec, AIC26_REG_DAC_GAIN, reg);
+ snd_soc_write(codec, AIC26_REG_DAC_GAIN, reg);
return 0;
}
@@ -348,7 +348,7 @@
val = aic26_reg_read_cache(aic26->codec, AIC26_REG_AUDIO_CTRL2);
val |= 0x8000;
- aic26_reg_write(aic26->codec, AIC26_REG_AUDIO_CTRL2, val);
+ snd_soc_write(aic26->codec, AIC26_REG_AUDIO_CTRL2, val);
return count;
}
@@ -368,20 +368,20 @@
dev_info(codec->dev, "Probing AIC26 SoC CODEC driver\n");
/* Reset the codec to power on defaults */
- aic26_reg_write(codec, AIC26_REG_RESET, 0xBB00);
+ snd_soc_write(codec, AIC26_REG_RESET, 0xBB00);
/* Power up CODEC */
- aic26_reg_write(codec, AIC26_REG_POWER_CTRL, 0);
+ snd_soc_write(codec, AIC26_REG_POWER_CTRL, 0);
/* Audio Control 3 (master mode, fsref rate) */
- reg = aic26_reg_read(codec, AIC26_REG_AUDIO_CTRL3);
+ reg = snd_soc_read(codec, AIC26_REG_AUDIO_CTRL3);
reg &= ~0xf800;
reg |= 0x0800; /* set master mode */
- aic26_reg_write(codec, AIC26_REG_AUDIO_CTRL3, reg);
+ snd_soc_write(codec, AIC26_REG_AUDIO_CTRL3, reg);
/* Fill register cache */
for (i = 0; i < codec->driver->reg_cache_size; i++)
- aic26_reg_read(codec, i);
+ snd_soc_read(codec, i);
/* Register the sysfs files for debugging */
/* Create SysFS files */