arch/powerpc/mm/slb_low.S - kernel/msm-5.4 - Gitiles

 /*
  * Low-level SLB routines
  *
  * Copyright (C) 2004 David Gibson <dwg@au.ibm.com>, IBM
  *
  * Based on earlier C version:
  * Dave Engebretsen and Mike Corrigan {engebret|mikejc}@us.ibm.com
  *    Copyright (c) 2001 Dave Engebretsen
  * Copyright (C) 2002 Anton Blanchard <anton@au.ibm.com>, IBM
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
  *  as published by the Free Software Foundation; either version
  *  2 of the License, or (at your option) any later version.
  */

 #include <asm/processor.h>
 #include <asm/ppc_asm.h>
 #include <asm/asm-offsets.h>
 #include <asm/cputable.h>
 #include <asm/page.h>
 #include <asm/mmu.h>
 #include <asm/pgtable.h>
 #include <asm/firmware.h>

 /*
  * This macro generates asm code to compute the VSID scramble
  * function.  Used in slb_allocate() and do_stab_bolted.  The function
  * computed is: (protovsid*VSID_MULTIPLIER) % VSID_MODULUS
  *
  *	rt = register containing the proto-VSID and into which the
  *		VSID will be stored
  *	rx = scratch register (clobbered)
  *	rf = flags
  *
  *	- rt and rx must be different registers
  *	- The answer will end up in the low VSID_BITS bits of rt.  The higher
  *	  bits may contain other garbage, so you may need to mask the
  *	  result.
  */
 #define ASM_VSID_SCRAMBLE(rt, rx, rf, size)				\
 	lis	rx,VSID_MULTIPLIER_##size@h;				\
 	ori	rx,rx,VSID_MULTIPLIER_##size@l;				\
 	mulld	rt,rt,rx;		/* rt = rt * MULTIPLIER */	\
 /*									\
  * powermac get slb fault before feature fixup, so make 65 bit part     \
  * the default part of feature fixup					\
  */									\
 BEGIN_MMU_FTR_SECTION							\
 	srdi	rx,rt,VSID_BITS_65_##size;				\
 	clrldi	rt,rt,(64-VSID_BITS_65_##size);				\
 	add	rt,rt,rx;						\
 	addi	rx,rt,1;						\
 	srdi	rx,rx,VSID_BITS_65_##size;				\
 	add	rt,rt,rx;						\
 	rldimi	rf,rt,SLB_VSID_SHIFT_##size,(64 - (SLB_VSID_SHIFT_##size + VSID_BITS_65_##size)); \
 MMU_FTR_SECTION_ELSE							\
 	srdi	rx,rt,VSID_BITS_##size;					\
 	clrldi	rt,rt,(64-VSID_BITS_##size);				\
 	add	rt,rt,rx;		/* add high and low bits */	\
 	addi	rx,rt,1;						\
 	srdi	rx,rx,VSID_BITS_##size;	/* extract 2^VSID_BITS bit */	\
 	add	rt,rt,rx;						\
 	rldimi	rf,rt,SLB_VSID_SHIFT_##size,(64 - (SLB_VSID_SHIFT_##size + VSID_BITS_##size)); \
 ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_68_BIT_VA)


 /* void slb_allocate(unsigned long ea);
  *
  * Create an SLB entry for the given EA (user or kernel).
  * 	r3 = faulting address, r13 = PACA
  *	r9, r10, r11 are clobbered by this function
  *	r3 is preserved.
  * No other registers are examined or changed.
  */
 _GLOBAL(slb_allocate)
 	/*
 	 * check for bad kernel/user address
 	 * (ea & ~REGION_MASK) >= PGTABLE_RANGE
 	 */
 	rldicr. r9,r3,4,(63 - H_PGTABLE_EADDR_SIZE - 4)
 	bne-	8f

 	srdi	r9,r3,60		/* get region */
 	srdi	r10,r3,SID_SHIFT	/* get esid */
 	cmpldi	cr7,r9,0xc		/* cmp PAGE_OFFSET for later use */

 	/* r3 = address, r10 = esid, cr7 = <> PAGE_OFFSET */
 	blt	cr7,0f			/* user or kernel? */

 	/* Check if hitting the linear mapping or some other kernel space
 	*/
 	bne	cr7,1f

 	/* Linear mapping encoding bits, the "li" instruction below will
 	 * be patched by the kernel at boot
 	 */
 .globl slb_miss_kernel_load_linear
 slb_miss_kernel_load_linear:
 	li	r11,0
 	/*
 	 * context = (ea >> 60) - (0xc - 1)
 	 * r9 = region id.
 	 */
 	subi	r9,r9,KERNEL_REGION_CONTEXT_OFFSET

 BEGIN_FTR_SECTION
 	b	.Lslb_finish_load
 END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
 	b	.Lslb_finish_load_1T

 1:
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
 	cmpldi	cr0,r9,0xf
 	bne	1f
 /* Check virtual memmap region. To be patched at kernel boot */
 .globl slb_miss_kernel_load_vmemmap
 slb_miss_kernel_load_vmemmap:
 	li	r11,0
 	b	6f
 1:
 #endif /* CONFIG_SPARSEMEM_VMEMMAP */

 	/*
 	 * r10 contains the ESID, which is the original faulting EA shifted
 	 * right by 28 bits. We need to compare that with (H_VMALLOC_END >> 28)
 	 * which is 0xd00038000. That can't be used as an immediate, even if we
 	 * ignored the 0xd, so we have to load it into a register, and we only
 	 * have one register free. So we must load all of (H_VMALLOC_END >> 28)
 	 * into a register and compare ESID against that.
 	 */
 	lis	r11,(H_VMALLOC_END >> 32)@h	// r11 = 0xffffffffd0000000
 	ori	r11,r11,(H_VMALLOC_END >> 32)@l	// r11 = 0xffffffffd0003800
 	// Rotate left 4, then mask with 0xffffffff0
 	rldic	r11,r11,4,28			// r11 = 0xd00038000
 	cmpld	r10,r11				// if r10 >= r11
 	bge	5f				//   goto io_mapping

 	/*
 	 * vmalloc mapping gets the encoding from the PACA as the mapping
 	 * can be demoted from 64K -> 4K dynamically on some machines.
 	 */
 	lhz	r11,PACAVMALLOCSLLP(r13)
 	b	6f
 5:
 	/* IO mapping */
 .globl slb_miss_kernel_load_io
 slb_miss_kernel_load_io:
 	li	r11,0
 6:
 	/*
 	 * context = (ea >> 60) - (0xc - 1)
 	 * r9 = region id.
 	 */
 	subi	r9,r9,KERNEL_REGION_CONTEXT_OFFSET

 BEGIN_FTR_SECTION
 	b	.Lslb_finish_load
 END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
 	b	.Lslb_finish_load_1T

 0:	/*
 	 * For userspace addresses, make sure this is region 0.
 	 */
 	cmpdi	r9, 0
 	bne-	8f
         /*
          * user space make sure we are within the allowed limit
 	 */
 	ld	r11,PACA_SLB_ADDR_LIMIT(r13)
 	cmpld	r3,r11
 	bge-	8f

 	/* when using slices, we extract the psize off the slice bitmaps
 	 * and then we need to get the sllp encoding off the mmu_psize_defs
 	 * array.
 	 *
 	 * XXX This is a bit inefficient especially for the normal case,
 	 * so we should try to implement a fast path for the standard page
 	 * size using the old sllp value so we avoid the array. We cannot
 	 * really do dynamic patching unfortunately as processes might flip
 	 * between 4k and 64k standard page size
 	 */
 #ifdef CONFIG_PPC_MM_SLICES
 	/* r10 have esid */
 	cmpldi	r10,16
 	/* below SLICE_LOW_TOP */
 	blt	5f
 	/*
 	 * Handle hpsizes,
 	 * r9 is get_paca()->context.high_slices_psize[index], r11 is mask_index
 	 */
 	srdi    r11,r10,(SLICE_HIGH_SHIFT - SLICE_LOW_SHIFT + 1) /* index */
 	addi	r9,r11,PACAHIGHSLICEPSIZE
 	lbzx	r9,r13,r9		/* r9 is hpsizes[r11] */
 	/* r11 = (r10 >> (SLICE_HIGH_SHIFT - SLICE_LOW_SHIFT)) & 0x1 */
 	rldicl	r11,r10,(64 - (SLICE_HIGH_SHIFT - SLICE_LOW_SHIFT)),63
 	b	6f

 5:
 	/*
 	 * Handle lpsizes
 	 * r9 is get_paca()->context.low_slices_psize, r11 is index
 	 */
 	ld	r9,PACALOWSLICESPSIZE(r13)
 	mr	r11,r10
 6:
 	sldi	r11,r11,2  /* index * 4 */
 	/* Extract the psize and multiply to get an array offset */
 	srd	r9,r9,r11
 	andi.	r9,r9,0xf
 	mulli	r9,r9,MMUPSIZEDEFSIZE

 	/* Now get to the array and obtain the sllp
 	 */
 	ld	r11,PACATOC(r13)
 	ld	r11,mmu_psize_defs@got(r11)
 	add	r11,r11,r9
 	ld	r11,MMUPSIZESLLP(r11)
 	ori	r11,r11,SLB_VSID_USER
 #else
 	/* paca context sllp already contains the SLB_VSID_USER bits */
 	lhz	r11,PACACONTEXTSLLP(r13)
 #endif /* CONFIG_PPC_MM_SLICES */

 	ld	r9,PACACONTEXTID(r13)
 BEGIN_FTR_SECTION
 	cmpldi	r10,0x1000
 	bge	.Lslb_finish_load_1T
 END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
 	b	.Lslb_finish_load

 8:	/* invalid EA - return an error indication */
 	crset	4*cr0+eq		/* indicate failure */
 	blr

 /*
  * Finish loading of an SLB entry and return
  *
  * r3 = EA, r9 = context, r10 = ESID, r11 = flags, clobbers r9, cr7 = <> PAGE_OFFSET
  */
 .Lslb_finish_load:
 	rldimi  r10,r9,ESID_BITS,0
 	ASM_VSID_SCRAMBLE(r10,r9,r11,256M)
 	/* r3 = EA, r11 = VSID data */
 	/*
 	 * Find a slot, round robin. Previously we tried to find a
 	 * free slot first but that took too long. Unfortunately we
  	 * dont have any LRU information to help us choose a slot.
  	 */

 	mr	r9,r3

 	/* slb_finish_load_1T continues here. r9=EA with non-ESID bits clear */
 7:	ld	r10,PACASTABRR(r13)
 	addi	r10,r10,1
 	/* This gets soft patched on boot. */
 .globl slb_compare_rr_to_size
 slb_compare_rr_to_size:
 	cmpldi	r10,0

 	blt+	4f
 	li	r10,SLB_NUM_BOLTED

 4:
 	std	r10,PACASTABRR(r13)

 3:
 	rldimi	r9,r10,0,36		/* r9  = EA[0:35] | entry */
 	oris	r10,r9,SLB_ESID_V@h	/* r10 = r9 | SLB_ESID_V */

 	/* r9 = ESID data, r11 = VSID data */

 	/*
 	 * No need for an isync before or after this slbmte. The exception
 	 * we enter with and the rfid we exit with are context synchronizing.
 	 */
 	slbmte	r11,r10

 	/* we're done for kernel addresses */
 	crclr	4*cr0+eq		/* set result to "success" */
 	bgelr	cr7

 	/* Update the slb cache */
 	lhz	r9,PACASLBCACHEPTR(r13)	/* offset = paca->slb_cache_ptr */
 	cmpldi	r9,SLB_CACHE_ENTRIES
 	bge	1f

 	/* still room in the slb cache */
 	sldi	r11,r9,2		/* r11 = offset * sizeof(u32) */
 	srdi    r10,r10,28		/* get the 36 bits of the ESID */
 	add	r11,r11,r13		/* r11 = (u32 *)paca + offset */
 	stw	r10,PACASLBCACHE(r11)	/* paca->slb_cache[offset] = esid */
 	addi	r9,r9,1			/* offset++ */
 	b	2f
 1:					/* offset >= SLB_CACHE_ENTRIES */
 	li	r9,SLB_CACHE_ENTRIES+1
 2:
 	sth	r9,PACASLBCACHEPTR(r13)	/* paca->slb_cache_ptr = offset */
 	crclr	4*cr0+eq		/* set result to "success" */
 	blr

 /*
  * Finish loading of a 1T SLB entry (for the kernel linear mapping) and return.
  *
  * r3 = EA, r9 = context, r10 = ESID(256MB), r11 = flags, clobbers r9
  */
 .Lslb_finish_load_1T:
 	srdi	r10,r10,(SID_SHIFT_1T - SID_SHIFT)	/* get 1T ESID */
 	rldimi  r10,r9,ESID_BITS_1T,0
 	ASM_VSID_SCRAMBLE(r10,r9,r11,1T)

 	li	r10,MMU_SEGSIZE_1T
 	rldimi	r11,r10,SLB_VSID_SSIZE_SHIFT,0	/* insert segment size */

 	/* r3 = EA, r11 = VSID data */
 	clrrdi	r9,r3,SID_SHIFT_1T	/* clear out non-ESID bits */
 	b	7b


 _ASM_NOKPROBE_SYMBOL(slb_allocate)
 _ASM_NOKPROBE_SYMBOL(slb_miss_kernel_load_linear)
 _ASM_NOKPROBE_SYMBOL(slb_miss_kernel_load_io)
 _ASM_NOKPROBE_SYMBOL(slb_compare_rr_to_size)
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
 _ASM_NOKPROBE_SYMBOL(slb_miss_kernel_load_vmemmap)
 #endif
	/*
	* Low-level SLB routines
	*
	* Copyright (C) 2004 David Gibson <dwg@au.ibm.com>, IBM
	*
	* Based on earlier C version:
	* Dave Engebretsen and Mike Corrigan {engebret\|mikejc}@us.ibm.com
	* Copyright (c) 2001 Dave Engebretsen
	* Copyright (C) 2002 Anton Blanchard <anton@au.ibm.com>, IBM
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* as published by the Free Software Foundation; either version
	* 2 of the License, or (at your option) any later version.
	*/

	#include <asm/processor.h>
	#include <asm/ppc_asm.h>
	#include <asm/asm-offsets.h>
	#include <asm/cputable.h>
	#include <asm/page.h>
	#include <asm/mmu.h>
	#include <asm/pgtable.h>
	#include <asm/firmware.h>

	/*
	* This macro generates asm code to compute the VSID scramble
	* function. Used in slb_allocate() and do_stab_bolted. The function
	* computed is: (protovsid*VSID_MULTIPLIER) % VSID_MODULUS
	*
	* rt = register containing the proto-VSID and into which the
	* VSID will be stored
	* rx = scratch register (clobbered)
	* rf = flags
	*
	* - rt and rx must be different registers
	* - The answer will end up in the low VSID_BITS bits of rt. The higher
	* bits may contain other garbage, so you may need to mask the
	* result.
	*/
	#define ASM_VSID_SCRAMBLE(rt, rx, rf, size) \
	lis rx,VSID_MULTIPLIER_##size@h; \
	ori rx,rx,VSID_MULTIPLIER_##size@l; \
	mulld rt,rt,rx; /* rt = rt * MULTIPLIER */ \
	/* \
	* powermac get slb fault before feature fixup, so make 65 bit part \
	* the default part of feature fixup \
	*/ \
	BEGIN_MMU_FTR_SECTION \
	srdi rx,rt,VSID_BITS_65_##size; \
	clrldi rt,rt,(64-VSID_BITS_65_##size); \
	add rt,rt,rx; \
	addi rx,rt,1; \
	srdi rx,rx,VSID_BITS_65_##size; \
	add rt,rt,rx; \
	rldimi rf,rt,SLB_VSID_SHIFT_##size,(64 - (SLB_VSID_SHIFT_##size + VSID_BITS_65_##size)); \
	MMU_FTR_SECTION_ELSE \
	srdi rx,rt,VSID_BITS_##size; \
	clrldi rt,rt,(64-VSID_BITS_##size); \
	add rt,rt,rx; /* add high and low bits */ \
	addi rx,rt,1; \
	srdi rx,rx,VSID_BITS_##size; /* extract 2^VSID_BITS bit */ \
	add rt,rt,rx; \
	rldimi rf,rt,SLB_VSID_SHIFT_##size,(64 - (SLB_VSID_SHIFT_##size + VSID_BITS_##size)); \
	ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_68_BIT_VA)


	/* void slb_allocate(unsigned long ea);
	*
	* Create an SLB entry for the given EA (user or kernel).
	* r3 = faulting address, r13 = PACA
	* r9, r10, r11 are clobbered by this function
	* r3 is preserved.
	* No other registers are examined or changed.
	*/
	_GLOBAL(slb_allocate)
	/*
	* check for bad kernel/user address
	* (ea & ~REGION_MASK) >= PGTABLE_RANGE
	*/
	rldicr. r9,r3,4,(63 - H_PGTABLE_EADDR_SIZE - 4)
	bne- 8f

	srdi r9,r3,60 /* get region */
	srdi r10,r3,SID_SHIFT /* get esid */
	cmpldi cr7,r9,0xc /* cmp PAGE_OFFSET for later use */

	/* r3 = address, r10 = esid, cr7 = <> PAGE_OFFSET */
	blt cr7,0f /* user or kernel? */

	/* Check if hitting the linear mapping or some other kernel space
	*/
	bne cr7,1f

	/* Linear mapping encoding bits, the "li" instruction below will
	* be patched by the kernel at boot
	*/
	.globl slb_miss_kernel_load_linear
	slb_miss_kernel_load_linear:
	li r11,0
	/*
	* context = (ea >> 60) - (0xc - 1)
	* r9 = region id.
	*/
	subi r9,r9,KERNEL_REGION_CONTEXT_OFFSET

	BEGIN_FTR_SECTION
	b .Lslb_finish_load
	END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
	b .Lslb_finish_load_1T

	1:
	#ifdef CONFIG_SPARSEMEM_VMEMMAP
	cmpldi cr0,r9,0xf
	bne 1f
	/* Check virtual memmap region. To be patched at kernel boot */
	.globl slb_miss_kernel_load_vmemmap
	slb_miss_kernel_load_vmemmap:
	li r11,0
	b 6f
	1:
	#endif /* CONFIG_SPARSEMEM_VMEMMAP */

	/*
	* r10 contains the ESID, which is the original faulting EA shifted
	* right by 28 bits. We need to compare that with (H_VMALLOC_END >> 28)
	* which is 0xd00038000. That can't be used as an immediate, even if we
	* ignored the 0xd, so we have to load it into a register, and we only
	* have one register free. So we must load all of (H_VMALLOC_END >> 28)
	* into a register and compare ESID against that.
	*/
	lis r11,(H_VMALLOC_END >> 32)@h // r11 = 0xffffffffd0000000
	ori r11,r11,(H_VMALLOC_END >> 32)@l // r11 = 0xffffffffd0003800
	// Rotate left 4, then mask with 0xffffffff0
	rldic r11,r11,4,28 // r11 = 0xd00038000
	cmpld r10,r11 // if r10 >= r11
	bge 5f // goto io_mapping

	/*
	* vmalloc mapping gets the encoding from the PACA as the mapping
	* can be demoted from 64K -> 4K dynamically on some machines.
	*/
	lhz r11,PACAVMALLOCSLLP(r13)
	b 6f
	5:
	/* IO mapping */
	.globl slb_miss_kernel_load_io
	slb_miss_kernel_load_io:
	li r11,0
	6:
	/*
	* context = (ea >> 60) - (0xc - 1)
	* r9 = region id.
	*/
	subi r9,r9,KERNEL_REGION_CONTEXT_OFFSET

	BEGIN_FTR_SECTION
	b .Lslb_finish_load
	END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
	b .Lslb_finish_load_1T

	0: /*
	* For userspace addresses, make sure this is region 0.
	*/
	cmpdi r9, 0
	bne- 8f
	/*
	* user space make sure we are within the allowed limit
	*/
	ld r11,PACA_SLB_ADDR_LIMIT(r13)
	cmpld r3,r11
	bge- 8f

	/* when using slices, we extract the psize off the slice bitmaps
	* and then we need to get the sllp encoding off the mmu_psize_defs
	* array.
	*
	* XXX This is a bit inefficient especially for the normal case,
	* so we should try to implement a fast path for the standard page
	* size using the old sllp value so we avoid the array. We cannot
	* really do dynamic patching unfortunately as processes might flip
	* between 4k and 64k standard page size
	*/
	#ifdef CONFIG_PPC_MM_SLICES
	/* r10 have esid */
	cmpldi r10,16
	/* below SLICE_LOW_TOP */
	blt 5f
	/*
	* Handle hpsizes,
	* r9 is get_paca()->context.high_slices_psize[index], r11 is mask_index
	*/
	srdi r11,r10,(SLICE_HIGH_SHIFT - SLICE_LOW_SHIFT + 1) /* index */
	addi r9,r11,PACAHIGHSLICEPSIZE
	lbzx r9,r13,r9 /* r9 is hpsizes[r11] */
	/* r11 = (r10 >> (SLICE_HIGH_SHIFT - SLICE_LOW_SHIFT)) & 0x1 */
	rldicl r11,r10,(64 - (SLICE_HIGH_SHIFT - SLICE_LOW_SHIFT)),63
	b 6f

	5:
	/*
	* Handle lpsizes
	* r9 is get_paca()->context.low_slices_psize, r11 is index
	*/
	ld r9,PACALOWSLICESPSIZE(r13)
	mr r11,r10
	6:
	sldi r11,r11,2 /* index * 4 */
	/* Extract the psize and multiply to get an array offset */
	srd r9,r9,r11
	andi. r9,r9,0xf
	mulli r9,r9,MMUPSIZEDEFSIZE

	/* Now get to the array and obtain the sllp
	*/
	ld r11,PACATOC(r13)
	ld r11,mmu_psize_defs@got(r11)
	add r11,r11,r9
	ld r11,MMUPSIZESLLP(r11)
	ori r11,r11,SLB_VSID_USER
	#else
	/* paca context sllp already contains the SLB_VSID_USER bits */
	lhz r11,PACACONTEXTSLLP(r13)
	#endif /* CONFIG_PPC_MM_SLICES */

	ld r9,PACACONTEXTID(r13)
	BEGIN_FTR_SECTION
	cmpldi r10,0x1000
	bge .Lslb_finish_load_1T
	END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
	b .Lslb_finish_load

	8: /* invalid EA - return an error indication */
	crset 4cr0+eq / indicate failure */
	blr

	/*
	* Finish loading of an SLB entry and return
	*
	* r3 = EA, r9 = context, r10 = ESID, r11 = flags, clobbers r9, cr7 = <> PAGE_OFFSET
	*/
	.Lslb_finish_load:
	rldimi r10,r9,ESID_BITS,0
	ASM_VSID_SCRAMBLE(r10,r9,r11,256M)
	/* r3 = EA, r11 = VSID data */
	/*
	* Find a slot, round robin. Previously we tried to find a
	* free slot first but that took too long. Unfortunately we
	* dont have any LRU information to help us choose a slot.
	*/

	mr r9,r3

	/* slb_finish_load_1T continues here. r9=EA with non-ESID bits clear */
	7: ld r10,PACASTABRR(r13)
	addi r10,r10,1
	/* This gets soft patched on boot. */
	.globl slb_compare_rr_to_size
	slb_compare_rr_to_size:
	cmpldi r10,0

	blt+ 4f
	li r10,SLB_NUM_BOLTED

	4:
	std r10,PACASTABRR(r13)

	3:
	rldimi r9,r10,0,36 /* r9 = EA[0:35] \| entry */
	oris r10,r9,SLB_ESID_V@h /* r10 = r9 \| SLB_ESID_V */

	/* r9 = ESID data, r11 = VSID data */

	/*
	* No need for an isync before or after this slbmte. The exception
	* we enter with and the rfid we exit with are context synchronizing.
	*/
	slbmte r11,r10

	/* we're done for kernel addresses */
	crclr 4cr0+eq / set result to "success" */
	bgelr cr7

	/* Update the slb cache */
	lhz r9,PACASLBCACHEPTR(r13) /* offset = paca->slb_cache_ptr */
	cmpldi r9,SLB_CACHE_ENTRIES
	bge 1f

	/* still room in the slb cache */
	sldi r11,r9,2 /* r11 = offset * sizeof(u32) */
	srdi r10,r10,28 /* get the 36 bits of the ESID */
	add r11,r11,r13 /* r11 = (u32 )paca + offset /
	stw r10,PACASLBCACHE(r11) /* paca->slb_cache[offset] = esid */
	addi r9,r9,1 /* offset++ */
	b 2f
	1: /* offset >= SLB_CACHE_ENTRIES */
	li r9,SLB_CACHE_ENTRIES+1
	2:
	sth r9,PACASLBCACHEPTR(r13) /* paca->slb_cache_ptr = offset */
	crclr 4cr0+eq / set result to "success" */
	blr

	/*
	* Finish loading of a 1T SLB entry (for the kernel linear mapping) and return.
	*
	* r3 = EA, r9 = context, r10 = ESID(256MB), r11 = flags, clobbers r9
	*/
	.Lslb_finish_load_1T:
	srdi r10,r10,(SID_SHIFT_1T - SID_SHIFT) /* get 1T ESID */
	rldimi r10,r9,ESID_BITS_1T,0
	ASM_VSID_SCRAMBLE(r10,r9,r11,1T)

	li r10,MMU_SEGSIZE_1T
	rldimi r11,r10,SLB_VSID_SSIZE_SHIFT,0 /* insert segment size */

	/* r3 = EA, r11 = VSID data */
	clrrdi r9,r3,SID_SHIFT_1T /* clear out non-ESID bits */
	b 7b


	_ASM_NOKPROBE_SYMBOL(slb_allocate)
	_ASM_NOKPROBE_SYMBOL(slb_miss_kernel_load_linear)
	_ASM_NOKPROBE_SYMBOL(slb_miss_kernel_load_io)
	_ASM_NOKPROBE_SYMBOL(slb_compare_rr_to_size)
	#ifdef CONFIG_SPARSEMEM_VMEMMAP
	_ASM_NOKPROBE_SYMBOL(slb_miss_kernel_load_vmemmap)
	#endif